- contact_quantityThe desired contact quantity to output as an auxiliary variable.
C++ Type:MooseEnum
Controllable:No
Description:The desired contact quantity to output as an auxiliary variable.
- user_objectThe penalty mortar user object to get values from. Note that the user object must implement the corresponding getter function.
C++ Type:UserObjectName
Controllable:No
Description:The penalty mortar user object to get values from. Note that the user object must implement the corresponding getter function.
- variableThe name of the variable that this object applies to
C++ Type:AuxVariableName
Unit:(no unit assumed)
Controllable:No
Description:The name of the variable that this object applies to
MortarUserObjectAux
Description
The MortarUserObjectAux outputs various contact quantities that are helpful for analyzing or debugging contact results. This auxiliary kernel is to be used in conjunction with mortar penalty contact user objects, namely PenaltyFrictionUserObject or PenaltyWeightedGapUserObject.
Quantities that this object can output include: the normal and friction pressure values, accumulated slip distances, tangential relative velocities, and weighted gap values.
Input Parameters
- blockThe list of blocks (ids or names) that this object will be applied
C++ Type:std::vector<SubdomainName>
Controllable:No
Description:The list of blocks (ids or names) that this object will be applied
- boundaryThe list of boundaries (ids or names) from the mesh where this object applies
C++ Type:std::vector<BoundaryName>
Controllable:No
Description:The list of boundaries (ids or names) from the mesh where this object applies
- check_boundary_restrictedTrueWhether to check for multiple element sides on the boundary in the case of a boundary restricted, element aux variable. Setting this to false will allow contribution to a single element's elemental value(s) from multiple boundary sides on the same element (example: when the restricted boundary exists on two or more sides of an element, such as at a corner of a mesh
Default:True
C++ Type:bool
Controllable:No
Description:Whether to check for multiple element sides on the boundary in the case of a boundary restricted, element aux variable. Setting this to false will allow contribution to a single element's elemental value(s) from multiple boundary sides on the same element (example: when the restricted boundary exists on two or more sides of an element, such as at a corner of a mesh
Optional Parameters
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Controllable:Yes
Description:Set the enabled status of the MooseObject.
- search_methodnearest_node_connected_sidesChoice of search algorithm. All options begin by finding the nearest node in the primary boundary to a query point in the secondary boundary. In the default nearest_node_connected_sides algorithm, primary boundary elements are searched iff that nearest node is one of their nodes. This is fast to determine via a pregenerated node-to-elem map and is robust on conforming meshes. In the optional all_proximate_sides algorithm, primary boundary elements are searched iff they touch that nearest node, even if they are not topologically connected to it. This is more CPU-intensive but is necessary for robustness on any boundary surfaces which has disconnections (such as Flex IGA meshes) or non-conformity (such as hanging nodes in adaptively h-refined meshes).
Default:nearest_node_connected_sides
C++ Type:MooseEnum
Options:nearest_node_connected_sides, all_proximate_sides
Controllable:No
Description:Choice of search algorithm. All options begin by finding the nearest node in the primary boundary to a query point in the secondary boundary. In the default nearest_node_connected_sides algorithm, primary boundary elements are searched iff that nearest node is one of their nodes. This is fast to determine via a pregenerated node-to-elem map and is robust on conforming meshes. In the optional all_proximate_sides algorithm, primary boundary elements are searched iff they touch that nearest node, even if they are not topologically connected to it. This is more CPU-intensive but is necessary for robustness on any boundary surfaces which has disconnections (such as Flex IGA meshes) or non-conformity (such as hanging nodes in adaptively h-refined meshes).
- seed0The seed for the master random number generator
Default:0
C++ Type:unsigned int
Controllable:No
Description:The seed for the master random number generator
- use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Default:False
C++ Type:bool
Controllable:No
Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Advanced Parameters
- prop_getter_suffixAn optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
C++ Type:MaterialPropertyName
Unit:(no unit assumed)
Controllable:No
Description:An optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
- use_interpolated_stateFalseFor the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.
Default:False
C++ Type:bool
Controllable:No
Description:For the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.
Material Property Retrieval Parameters
Input Files
- (modules/contact/test/tests/pdass_problems/cylinder_friction_penalty_frictional_al_action_amg_bussetta_simple.i)
- (modules/contact/test/tests/pdass_problems/ironing_penalty.i)
- (modules/contact/test/tests/pdass_problems/cylinder_friction_penalty_frictional_al_action.i)
- (modules/contact/test/tests/3d-mortar-contact/frictional-mortar-3d-al.i)
- (modules/contact/test/tests/pdass_problems/ironing_penalty_al.i)
- (modules/contact/test/tests/pdass_problems/cylinder_friction_penalty_frictional_al.i)
- (modules/contact/test/tests/pdass_problems/cylinder_friction_penalty_normal_al_backup.i)
- (modules/contact/test/tests/pdass_problems/cylinder_friction_penalty_frictional_al_tight_slip.i)
- (modules/contact/test/tests/pdass_problems/cylinder_friction_penalty_adaptivity.i)
- (modules/contact/test/tests/pdass_problems/cylinder_friction_penalty_normal_al.i)
- (modules/contact/test/tests/pdass_problems/ironing_penalty_action.i)
- (modules/contact/test/tests/pdass_problems/cylinder_friction_penalty_frictional_al_action_amg_tight.i)
- (modules/contact/test/tests/mortar_augmented_lagrange/aux_errors.i)
- (modules/contact/test/tests/3d-mortar-contact/frictionless-mortar-3d-penalty.i)
- (modules/contact/test/tests/3d-mortar-contact/frictional-mortar-3d-penalty.i)
- (modules/contact/test/tests/pdass_problems/cylinder_friction_penalty_frictional_al_action_amg.i)
- (modules/contact/test/tests/pdass_problems/cylinder_friction_penalty_normal_al_test_nochange.i)
- (modules/contact/test/tests/pdass_problems/cylinder_friction_penalty.i)
(modules/contact/test/tests/pdass_problems/cylinder_friction_penalty_frictional_al_action_amg_bussetta_simple.i)
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Mesh]
[input_file]
type = FileMeshGenerator
file = cond_number.e
[]
allow_renumbering = false
[]
[Problem]
type = AugmentedLagrangianContactFEProblem
extra_tag_vectors = 'ref'
maximum_lagrangian_update_iterations = 1000
[]
[AuxVariables]
[penalty_normal_pressure]
[]
[penalty_frictional_pressure]
[]
[accumulated_slip_one]
[]
[tangential_vel_one]
[]
[normal_gap]
[]
[normal_lm]
[]
[saved_x]
[]
[saved_y]
[]
[active]
[]
[]
[Functions]
[disp_ramp_vert]
type = PiecewiseLinear
x = '0. 1. 3.5'
y = '0. -0.020 -0.020'
[]
[disp_ramp_horz]
type = PiecewiseLinear
x = '0. 1. 3.5'
y = '0. 0.0 0.015'
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
add_variables = true
save_in = 'saved_x saved_y'
extra_vector_tags = 'ref'
block = '1 2 3 4 5 6 7'
generate_output = 'stress_xx stress_yy stress_xy'
[]
[AuxKernels]
[penalty_normal_pressure]
type = MortarUserObjectAux
variable = penalty_normal_pressure
user_object = penalty_friction_object_al_friction
contact_quantity = normal_pressure
boundary = 3
[]
[penalty_frictional_pressure]
type = MortarUserObjectAux
variable = penalty_frictional_pressure
user_object = penalty_friction_object_al_friction
contact_quantity = tangential_pressure_one
boundary = 3
[]
[penalty_tangential_vel_one]
type = MortarUserObjectAux
variable = tangential_vel_one
user_object = penalty_friction_object_al_friction
contact_quantity = tangential_velocity_one
boundary = 3
[]
[penalty_accumulated_slip_one]
type = MortarUserObjectAux
variable = accumulated_slip_one
user_object = penalty_friction_object_al_friction
contact_quantity = accumulated_slip_one
boundary = 3
[]
[normal_lm]
type = MortarUserObjectAux
variable = normal_lm
user_object = penalty_friction_object_al_friction
contact_quantity = normal_lm
boundary = 3
[]
[normal_gap]
type = MortarUserObjectAux
variable = normal_gap
user_object = penalty_friction_object_al_friction
contact_quantity = normal_gap
boundary = 3
[]
[]
[Postprocessors]
[bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[]
[bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[]
[top_react_x]
type = NodalSum
variable = saved_x
boundary = 4
[]
[top_react_y]
type = NodalSum
variable = saved_y
boundary = 4
[]
[_dt]
type = TimestepSize
[]
[num_lin_it]
type = NumLinearIterations
[]
[num_nonlin_it]
type = NumNonlinearIterations
[]
[cumulative]
type = CumulativeValuePostprocessor
postprocessor = num_nonlin_it
[]
[gap]
type = SideExtremeValue
value_type = min
variable = normal_gap
boundary = 3
[]
[num_al]
type = NumAugmentedLagrangeIterations
[]
[active_set_size]
type = NodalSum
variable = active
[]
[]
[BCs]
[side_x]
type = DirichletBC
variable = disp_y
boundary = '1 2'
value = 0.0
[]
[bot_y]
type = DirichletBC
variable = disp_x
boundary = '1 2'
value = 0.0
[]
[top_y_disp]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = disp_ramp_vert
[]
[top_x_disp]
type = FunctionDirichletBC
variable = disp_x
boundary = 4
function = disp_ramp_horz
[]
[]
[Materials]
[stuff1_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e8
poissons_ratio = 0.0
[]
[stuff1_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[]
[stuff2_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2 3 4 5 6 7'
youngs_modulus = 1e6
poissons_ratio = 0.3
[]
[stuff2_stress]
type = ComputeFiniteStrainElasticStress
block = '2 3 4 5 6 7'
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options = '-ksp_snes_ew'
petsc_options_iname = '-ksp_gmres_restart -pc_type -pc_hypre_type -pc_hypre_boomeramg_max_iter'
petsc_options_value = ' 201 hypre boomeramg 8'
line_search = 'none'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-8
nl_max_its = 50
l_tol = 1e-05
l_abs_tol = 1e-13
start_time = 0.0
end_time = 0.1 # 1.0
dt = 0.1
dtmin = 0.1
[Predictor]
type = SimplePredictor
scale = 1.0
[]
automatic_scaling = true
compute_scaling_once = false
off_diagonals_in_auto_scaling = true
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[VectorPostprocessors]
[surface]
type = NodalValueSampler
use_displaced_mesh = false
variable = 'disp_x disp_y penalty_normal_pressure penalty_frictional_pressure normal_gap'
boundary = '3'
sort_by = id
[]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
exodus = true
csv = false
[vectorpp_output]
type = CSV
create_final_symlink = true
execute_on = 'INITIAL TIMESTEP_END FINAL'
[]
[]
[Contact]
[al_friction]
formulation = mortar_penalty
model = coulomb
primary = '2'
secondary = '3'
penalty = 1e7
penalty_friction = 1e+7
friction_coefficient = 0.4
adaptivity_penalty_friction = SIMPLE
adaptivity_penalty_normal = BUSSETTA
al_penetration_tolerance = 1e-7
al_incremental_slip_tolerance = 1e-5 # Not active
penalty_multiplier = 100
penalty_multiplier_friction = 5
[]
[]
(modules/contact/test/tests/pdass_problems/ironing_penalty.i)
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Mesh]
[input_file]
type = FileMeshGenerator
file = iron.e
[]
[secondary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 10001
new_block_name = 'secondary_lower'
sidesets = '10'
input = input_file
[]
[primary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 10000
sidesets = '20'
new_block_name = 'primary_lower'
input = secondary
[]
patch_update_strategy = auto
patch_size = 20
allow_renumbering = false
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[]
[AuxVariables]
[penalty_normal_pressure]
order = FIRST
family = LAGRANGE
[]
[penalty_frictional_pressure]
order = FIRST
family = LAGRANGE
[]
[accumulated_slip_one]
order = FIRST
family = LAGRANGE
[]
[tangential_vel_one]
order = FIRST
family = LAGRANGE
[]
[real_weighted_gap]
order = FIRST
family = LAGRANGE
[]
[stress_xx]
order = CONSTANT
family = MONOMIAL
[]
[stress_yy]
order = CONSTANT
family = MONOMIAL
[]
[stress_xy]
order = CONSTANT
family = MONOMIAL
[]
[saved_x]
[]
[saved_y]
[]
[diag_saved_x]
[]
[diag_saved_y]
[]
[von_mises]
order = CONSTANT
family = MONOMIAL
[]
[]
[Functions]
[disp_ramp_vert]
type = PiecewiseLinear
x = '0. 2. 8.'
y = '0. -1.0 -1.0'
[]
[disp_ramp_horz]
type = PiecewiseLinear
x = '0. 8.'
y = '0. 8.'
[]
[]
[Kernels]
[TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
block = '1 2'
strain = FINITE
[]
[]
[AuxKernels]
[penalty_normal_pressure_auxk]
type = MortarUserObjectAux
variable = penalty_normal_pressure
user_object = friction_uo
contact_quantity = normal_pressure
[]
[penalty_frictional_pressure_auxk]
type = MortarUserObjectAux
variable = penalty_frictional_pressure
user_object = friction_uo
contact_quantity = tangential_pressure_one
[]
[penalty_accumulated_slip_auxk]
type = MortarUserObjectAux
variable = accumulated_slip_one
user_object = friction_uo
contact_quantity = accumulated_slip_one
[]
[penalty_tangential_vel_auxk]
type = MortarUserObjectAux
variable = tangential_vel_one
user_object = friction_uo
contact_quantity = tangential_velocity_one
[]
[real_weighted_gap_auxk]
type = MortarUserObjectAux
variable = real_weighted_gap
user_object = friction_uo
contact_quantity = normal_gap
[]
[stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
block = '1 2'
[]
[stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
block = '1 2'
[]
[stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
block = '1 2'
[]
[von_mises_kernel]
#Calculates the von mises stress and assigns it to von_mises
type = RankTwoScalarAux
variable = von_mises
rank_two_tensor = stress
execute_on = timestep_end
scalar_type = VonMisesStress
block = '1 2'
[]
[]
[VectorPostprocessors]
[penalty_normal_pressure]
type = NodalValueSampler
variable = penalty_normal_pressure
boundary = 10
sort_by = id
[]
[]
[BCs]
[bot_x_disp]
type = DirichletBC
variable = disp_x
boundary = '40'
value = 0.0
preset = false
[]
[bot_y_disp]
type = DirichletBC
variable = disp_y
boundary = '40'
value = 0.0
preset = false
[]
[top_y_disp]
type = FunctionDirichletBC
variable = disp_y
boundary = '30'
function = disp_ramp_vert
preset = false
[]
[top_x_disp]
type = FunctionDirichletBC
variable = disp_x
boundary = '30'
function = disp_ramp_horz
preset = false
[]
[]
[Materials]
[stuff1_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 6896
poissons_ratio = 0.32
[]
[stuff1_strain]
type = ComputeFiniteStrain
block = '2'
[]
[stuff1_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[]
[stuff2_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 689.6
poissons_ratio = 0.32
[]
[stuff2_strain]
type = ComputeFiniteStrain
block = '1'
[]
[stuff2_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_type'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
nl_rel_tol = 1e-7
l_tol = 1e-6
l_max_its = 50
nl_max_its = 30
start_time = 0.0
end_time = 6.5
dt = 0.0125
dtmin = 1e-5
[Predictor]
type = SimplePredictor
scale = 1.0
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
exodus = true
csv = true
[chkfile]
type = CSV
start_time = 0.0
execute_vector_postprocessors_on = FINAL
[]
[console]
type = Console
max_rows = 5
[]
[]
[Debug]
show_var_residual_norms = true
[]
[UserObjects]
[friction_uo]
type = PenaltyFrictionUserObject
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 10000
secondary_subdomain = 10001
disp_x = disp_x
disp_y = disp_y
friction_coefficient = 0.1 # with 2.0 works
secondary_variable = disp_x
penalty = 1e5
penalty_friction = 1e4
use_physical_gap = true
[]
[]
[Constraints]
[x]
type = NormalMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 10000
secondary_subdomain = 10001
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[y]
type = NormalMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 10000
secondary_subdomain = 10001
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[t_x]
type = TangentialMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 10000
secondary_subdomain = 10001
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[t_y]
type = TangentialMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 10000
secondary_subdomain = 10001
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[]
(modules/contact/test/tests/pdass_problems/cylinder_friction_penalty_frictional_al_action.i)
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Mesh]
[input_file]
type = FileMeshGenerator
file = hertz_cyl_finer.e
[]
allow_renumbering = false
[]
[Problem]
type = AugmentedLagrangianContactFEProblem
extra_tag_vectors = 'ref'
[]
[AuxVariables]
[penalty_normal_pressure]
[]
[penalty_frictional_pressure]
[]
[accumulated_slip_one]
[]
[tangential_vel_one]
[]
[normal_gap]
[]
[normal_lm]
[]
[saved_x]
[]
[saved_y]
[]
[active]
[]
[]
[Functions]
[disp_ramp_vert]
type = PiecewiseLinear
x = '0. 1. 3.5'
y = '0. -0.020 -0.020'
[]
[disp_ramp_horz]
type = PiecewiseLinear
x = '0. 1. 3.5'
y = '0. 0.0 0.015'
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
add_variables = true
save_in = 'saved_x saved_y'
extra_vector_tags = 'ref'
block = '1 2 3 4 5 6 7'
generate_output = 'stress_xx stress_yy stress_xy'
[]
[AuxKernels]
[penalty_normal_pressure]
type = MortarUserObjectAux
variable = penalty_normal_pressure
user_object = penalty_friction_object_al_friction
contact_quantity = normal_pressure
boundary = 3
[]
[penalty_frictional_pressure]
type = MortarUserObjectAux
variable = penalty_frictional_pressure
user_object = penalty_friction_object_al_friction
contact_quantity = tangential_pressure_one
boundary = 3
[]
[penalty_tangential_vel_one]
type = MortarUserObjectAux
variable = tangential_vel_one
user_object = penalty_friction_object_al_friction
contact_quantity = tangential_velocity_one
boundary = 3
[]
[penalty_accumulated_slip_one]
type = MortarUserObjectAux
variable = accumulated_slip_one
user_object = penalty_friction_object_al_friction
contact_quantity = accumulated_slip_one
boundary = 3
[]
[normal_lm]
type = MortarUserObjectAux
variable = normal_lm
user_object = penalty_friction_object_al_friction
contact_quantity = normal_lm
boundary = 3
[]
[normal_gap]
type = MortarUserObjectAux
variable = normal_gap
user_object = penalty_friction_object_al_friction
contact_quantity = normal_gap
boundary = 3
[]
[]
[Postprocessors]
[bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[]
[bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[]
[top_react_x]
type = NodalSum
variable = saved_x
boundary = 4
[]
[top_react_y]
type = NodalSum
variable = saved_y
boundary = 4
[]
[_dt]
type = TimestepSize
[]
[num_lin_it]
type = NumLinearIterations
[]
[num_nonlin_it]
type = NumNonlinearIterations
[]
[cumulative]
type = CumulativeValuePostprocessor
postprocessor = num_nonlin_it
[]
[gap]
type = SideExtremeValue
value_type = min
variable = normal_gap
boundary = 3
[]
[num_al]
type = NumAugmentedLagrangeIterations
[]
[active_set_size]
type = NodalSum
variable = active
[]
[]
[BCs]
[side_x]
type = DirichletBC
variable = disp_y
boundary = '1 2'
value = 0.0
[]
[bot_y]
type = DirichletBC
variable = disp_x
boundary = '1 2'
value = 0.0
[]
[top_y_disp]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = disp_ramp_vert
[]
[top_x_disp]
type = FunctionDirichletBC
variable = disp_x
boundary = 4
function = disp_ramp_horz
[]
[]
[Materials]
[stuff1_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e8
poissons_ratio = 0.0
[]
[stuff1_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[]
[stuff2_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2 3 4 5 6 7'
youngs_modulus = 1e6
poissons_ratio = 0.3
[]
[stuff2_stress]
type = ComputeFiniteStrainElasticStress
block = '2 3 4 5 6 7'
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = -pc_type
petsc_options_value = lu
line_search = 'basic'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-8
nl_max_its = 50
l_tol = 1e-05
l_abs_tol = 1e-13
start_time = 0.0
end_time = 0.2 # 3.5
dt = 0.1
dtmin = 0.1
[Predictor]
type = SimplePredictor
scale = 1.0
[]
automatic_scaling = true
compute_scaling_once = false
off_diagonals_in_auto_scaling = true
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[VectorPostprocessors]
[surface]
type = NodalValueSampler
use_displaced_mesh = false
variable = 'disp_x disp_y penalty_normal_pressure penalty_frictional_pressure normal_gap'
boundary = '3'
sort_by = id
[]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
exodus = true
csv = false
[vectorpp_output]
type = CSV
create_final_symlink = true
execute_on = 'INITIAL TIMESTEP_END FINAL'
[]
[]
[Contact]
[al_friction]
formulation = mortar_penalty
model = coulomb
primary = '2'
secondary = '3'
penalty = 1e5
penalty_friction = 1e8
friction_coefficient = 0.4
al_penetration_tolerance = 1e-7
al_incremental_slip_tolerance = 1.0 # Not active
penalty_multiplier = 100
penalty_multiplier_friction = 1
[]
[]
(modules/contact/test/tests/3d-mortar-contact/frictional-mortar-3d-al.i)
starting_point = 0.25
offset = 0.00
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
volumetric_locking_correction = true
[]
[AuxVariables]
[penalty_normal_pressure]
order = FIRST
family = LAGRANGE
[]
[penalty_frictional_pressure_one]
order = FIRST
family = LAGRANGE
[]
[accumulated_slip_one]
order = FIRST
family = LAGRANGE
[]
[penalty_frictional_pressure_two]
order = FIRST
family = LAGRANGE
[]
[accumulated_slip_two]
order = FIRST
family = LAGRANGE
[]
[]
[Problem]
type = AugmentedLagrangianContactFEProblem
[]
[AuxKernels]
[penalty_normal_pressure_auxk]
type = MortarUserObjectAux
variable = penalty_normal_pressure
user_object = friction_uo
contact_quantity = normal_pressure
[]
[penalty_frictional_pressure_one_auxk]
type = MortarUserObjectAux
variable = penalty_frictional_pressure_one
user_object = friction_uo
contact_quantity = tangential_pressure_one
[]
[penalty_accumulated_slip_auxk]
type = MortarUserObjectAux
variable = accumulated_slip_one
user_object = friction_uo
contact_quantity = accumulated_slip_one
[]
[penalty_frictional_pressure_two_auxk]
type = MortarUserObjectAux
variable = penalty_frictional_pressure_two
user_object = friction_uo
contact_quantity = tangential_pressure_two
[]
[penalty_accumulated_slip_two_auxk]
type = MortarUserObjectAux
variable = accumulated_slip_two
user_object = friction_uo
contact_quantity = accumulated_slip_two
[]
[]
[Mesh]
[top_block]
type = GeneratedMeshGenerator
dim = 3
nx = 3
ny = 3
nz = 3
xmin = -0.25
xmax = 0.25
ymin = -0.25
ymax = 0.25
zmin = -0.25
zmax = 0.25
elem_type = HEX8
[]
[rotate_top_block]
type = TransformGenerator
input = top_block
transform = ROTATE
vector_value = '0 0 0'
[]
[top_block_sidesets]
type = RenameBoundaryGenerator
input = rotate_top_block
old_boundary = '0 1 2 3 4 5'
new_boundary = 'top_bottom top_back top_right top_front top_left top_top'
[]
[top_block_id]
type = SubdomainIDGenerator
input = top_block_sidesets
subdomain_id = 1
[]
[bottom_block]
type = GeneratedMeshGenerator
dim = 3
nx = 10
ny = 10
nz = 2
xmin = -.5
xmax = .5
ymin = -.5
ymax = .5
zmin = -.3
zmax = -.25
elem_type = HEX8
[]
[bottom_block_id]
type = SubdomainIDGenerator
input = bottom_block
subdomain_id = 2
[]
[bottom_block_change_boundary_id]
type = RenameBoundaryGenerator
input = bottom_block_id
old_boundary = '0 1 2 3 4 5'
new_boundary = '100 101 102 103 104 105'
[]
[combined]
type = MeshCollectionGenerator
inputs = 'top_block_id bottom_block_change_boundary_id'
[]
[block_rename]
type = RenameBlockGenerator
input = combined
old_block = '1 2'
new_block = 'top_block bottom_block'
[]
[bottom_right_sideset]
type = SideSetsAroundSubdomainGenerator
input = block_rename
new_boundary = bottom_right
block = bottom_block
normal = '1 0 0'
[]
[bottom_left_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_right_sideset
new_boundary = bottom_left
block = bottom_block
normal = '-1 0 0'
[]
[bottom_top_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_left_sideset
new_boundary = bottom_top
block = bottom_block
normal = '0 0 1'
[]
[bottom_bottom_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_top_sideset
new_boundary = bottom_bottom
block = bottom_block
normal = '0 0 -1'
[]
[bottom_front_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_bottom_sideset
new_boundary = bottom_front
block = bottom_block
normal = '0 1 0'
[]
[bottom_back_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_front_sideset
new_boundary = bottom_back
block = bottom_block
normal = '0 -1 0'
[]
[secondary]
input = bottom_back_sideset
type = LowerDBlockFromSidesetGenerator
sidesets = 'top_bottom' # top_back top_left'
new_block_id = '10001'
new_block_name = 'secondary_lower'
[]
[primary]
input = secondary
type = LowerDBlockFromSidesetGenerator
sidesets = 'bottom_top'
new_block_id = '10000'
new_block_name = 'primary_lower'
[]
allow_renumbering = false
[]
[Variables]
[]
[Physics/SolidMechanics/QuasiStatic]
[all]
add_variables = true
strain = FINITE
block = '1 2'
use_automatic_differentiation = false
generate_output = 'stress_xx stress_xy stress_xz stress_yy stress_zz'
[]
[]
[Materials]
[tensor]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1.0e5
poissons_ratio = 0.0
[]
[stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[]
[tensor_1000]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e5
poissons_ratio = 0.0
[]
[stress_1000]
type = ComputeFiniteStrainElasticStress
block = '2'
[]
[]
# Other object should mix formulations
[UserObjects]
[friction_uo]
type = PenaltyFrictionUserObject
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
friction_coefficient = 0.4
secondary_variable = disp_x
penalty = 1e0
penalty_friction = 1e1
slip_tolerance = 7.0e-4 # 1e-6
penetration_tolerance = 7.0e-4
# max_penalty_multiplier = 10
penalty_multiplier = 10
penalty_multiplier_friction = 5
[]
[]
[Constraints]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[normal_z]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
secondary_variable = disp_z
component = z
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[tangential_x]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[tangential_y]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[tangential_z]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
secondary_variable = disp_z
component = z
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[tangential_dir_x]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
secondary_variable = disp_x
component = x
direction = direction_2
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[tangential_dir_y]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
secondary_variable = disp_y
component = y
direction = direction_2
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[tangential_dir_z]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
secondary_variable = disp_z
component = z
direction = direction_2
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[]
[BCs]
[botx]
type = DirichletBC
variable = disp_x
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[boty]
type = DirichletBC
variable = disp_y
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[botz]
type = DirichletBC
variable = disp_z
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[topx]
type = DirichletBC
variable = disp_x
boundary = 'top_top'
value = 0.0
[]
[topy]
type = DirichletBC
variable = disp_y
boundary = 'top_top'
value = 0.0
[]
[topz]
type = FunctionDirichletBC
variable = disp_z
boundary = 'top_top'
function = '-${starting_point} * sin(2 * pi / 40 * t) + ${offset}'
[]
[]
[Executioner]
type = Transient
end_time = .025
dt = .025
dtmin = .001
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason -snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_type'
petsc_options_value = 'lu superlu_dist'
l_max_its = 15
nl_max_its = 90
nl_rel_tol = 1e-12
nl_abs_tol = 1e-13
line_search = 'basic'
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
exodus = true
csv = true
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
[]
[VectorPostprocessors]
[]
(modules/contact/test/tests/pdass_problems/ironing_penalty_al.i)
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Mesh]
[input_file]
type = FileMeshGenerator
file = iron.e
[]
[secondary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 10001
new_block_name = 'secondary_lower'
sidesets = '10'
input = input_file
[]
[primary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 10000
sidesets = '20'
new_block_name = 'primary_lower'
input = secondary
[]
patch_update_strategy = auto
patch_size = 20
allow_renumbering = false
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[]
[AuxVariables]
[penalty_normal_pressure]
order = FIRST
family = LAGRANGE
[]
[penalty_frictional_pressure]
order = FIRST
family = LAGRANGE
[]
[accumulated_slip_one]
order = FIRST
family = LAGRANGE
[]
[tangential_vel_one]
order = FIRST
family = LAGRANGE
[]
[real_weighted_gap]
order = FIRST
family = LAGRANGE
[]
[stress_xx]
order = CONSTANT
family = MONOMIAL
[]
[stress_yy]
order = CONSTANT
family = MONOMIAL
[]
[stress_xy]
order = CONSTANT
family = MONOMIAL
[]
[saved_x]
[]
[saved_y]
[]
[diag_saved_x]
[]
[diag_saved_y]
[]
[von_mises]
order = CONSTANT
family = MONOMIAL
[]
[]
[Functions]
[disp_ramp_vert]
type = PiecewiseLinear
x = '0. 2. 8.'
y = '0. -1.0 -1.0'
[]
[disp_ramp_horz]
type = PiecewiseLinear
x = '0. 8.'
y = '0. 8.'
[]
[]
[Kernels]
[TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
block = '1 2'
strain = FINITE
[]
[]
[AuxKernels]
[penalty_normal_pressure_auxk]
type = MortarUserObjectAux
variable = penalty_normal_pressure
user_object = friction_uo
contact_quantity = normal_pressure
[]
[penalty_frictional_pressure_auxk]
type = MortarUserObjectAux
variable = penalty_frictional_pressure
user_object = friction_uo
contact_quantity = tangential_pressure_one
[]
[penalty_accumulated_slip_auxk]
type = MortarUserObjectAux
variable = accumulated_slip_one
user_object = friction_uo
contact_quantity = accumulated_slip_one
[]
[penalty_tangential_vel_auxk]
type = MortarUserObjectAux
variable = tangential_vel_one
user_object = friction_uo
contact_quantity = tangential_velocity_one
[]
[real_weighted_gap_auxk]
type = MortarUserObjectAux
variable = real_weighted_gap
user_object = friction_uo
contact_quantity = normal_gap
[]
[stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
block = '1 2'
[]
[stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
block = '1 2'
[]
[stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
block = '1 2'
[]
[von_mises_kernel]
#Calculates the von mises stress and assigns it to von_mises
type = RankTwoScalarAux
variable = von_mises
rank_two_tensor = stress
execute_on = timestep_end
scalar_type = VonMisesStress
block = '1 2'
[]
[]
# [VectorPostprocessors]
# [penalty_normal_pressure]
# type = NodalValueSampler
# variable = penalty_normal_pressure
# boundary = 10
# sort_by = id
# []
# []
[Postprocessors]
[num_nl]
type = NumNonlinearIterations
[]
[cumulative]
type = CumulativeValuePostprocessor
postprocessor = num_nl
[]
[force_x]
type = NodalSum
boundary = 30
variable = saved_x
[]
[force_y]
type = NodalSum
boundary = 30
variable = saved_y
[]
[gap]
type = SideExtremeValue
value_type = min
variable = real_weighted_gap
boundary = 10
[]
[num_al]
type = NumAugmentedLagrangeIterations
[]
[]
[BCs]
[bot_x_disp]
type = DirichletBC
variable = disp_x
boundary = '40'
value = 0.0
preset = false
[]
[bot_y_disp]
type = DirichletBC
variable = disp_y
boundary = '40'
value = 0.0
preset = false
[]
[top_y_disp]
type = FunctionDirichletBC
variable = disp_y
boundary = '30'
function = disp_ramp_vert
preset = false
[]
[top_x_disp]
type = FunctionDirichletBC
variable = disp_x
boundary = '30'
function = disp_ramp_horz
preset = false
[]
[]
[Materials]
[stuff1_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 6896
poissons_ratio = 0.32
[]
[stuff1_strain]
type = ComputeFiniteStrain
block = '2'
[]
[stuff1_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[]
[stuff2_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 689.6
poissons_ratio = 0.32
[]
[stuff2_strain]
type = ComputeFiniteStrain
block = '1'
[]
[stuff2_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_type'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
nl_rel_tol = 1e-7
l_tol = 1e-6
l_max_its = 7
nl_max_its = 300
start_time = 0.0
end_time = 6.5
dt = 0.0125
dtmin = 1e-5
[Predictor]
type = SimplePredictor
scale = 1.0
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
exodus = true
csv = true
# [chkfile]
# type = CSV
# start_time = 0.0
# execute_vector_postprocessors_on = FINAL
# []
[console]
type = Console
max_rows = 5
[]
[]
[Debug]
show_var_residual_norms = true
[]
[Problem]
type = AugmentedLagrangianContactFEProblem
[]
[UserObjects]
[friction_uo]
type = PenaltyFrictionUserObject
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 10000
secondary_subdomain = 10001
disp_x = disp_x
disp_y = disp_y
friction_coefficient = 0.4 # with 2.0 works
secondary_variable = disp_x
penalty = 5e5
penalty_friction = 1e4
slip_tolerance = 1e-05
penetration_tolerance = 1e-03
[]
[]
[Constraints]
[x]
type = NormalMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 10000
secondary_subdomain = 10001
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[y]
type = NormalMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 10000
secondary_subdomain = 10001
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[t_x]
type = TangentialMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 10000
secondary_subdomain = 10001
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[t_y]
type = TangentialMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 10000
secondary_subdomain = 10001
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[]
(modules/contact/test/tests/pdass_problems/cylinder_friction_penalty_frictional_al.i)
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Mesh]
[input_file]
type = FileMeshGenerator
file = hertz_cyl_finer.e
[]
[secondary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 10001
new_block_name = 'secondary_lower'
sidesets = '3'
input = input_file
[]
[primary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 10000
sidesets = '2'
new_block_name = 'primary_lower'
input = secondary
[]
allow_renumbering = false
[]
[Problem]
type = AugmentedLagrangianContactFEProblem
extra_tag_vectors = 'ref'
[]
[AuxVariables]
[penalty_normal_pressure]
[]
[penalty_frictional_pressure]
[]
[accumulated_slip_one]
[]
[tangential_vel_one]
[]
[normal_gap]
[]
[normal_lm]
[]
[saved_x]
[]
[saved_y]
[]
[active]
[]
[dual_var]
use_dual = true
block = '10001'
[]
[]
[Functions]
[disp_ramp_vert]
type = PiecewiseLinear
x = '0. 1. 3.5'
y = '0. -0.020 -0.020'
[]
[disp_ramp_horz]
type = PiecewiseLinear
x = '0. 1. 3.5'
y = '0. 0.0 0.015'
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
add_variables = true
save_in = 'saved_x saved_y'
extra_vector_tags = 'ref'
block = '1 2 3 4 5 6 7'
generate_output = 'stress_xx stress_yy stress_xy'
[]
[AuxKernels]
[penalty_normal_pressure]
type = MortarUserObjectAux
variable = penalty_normal_pressure
user_object = friction_uo
contact_quantity = normal_pressure
boundary = 3
[]
[penalty_frictional_pressure]
type = MortarUserObjectAux
variable = penalty_frictional_pressure
user_object = friction_uo
contact_quantity = tangential_pressure_one
boundary = 3
[]
[penalty_tangential_vel_one]
type = MortarUserObjectAux
variable = tangential_vel_one
user_object = friction_uo
contact_quantity = tangential_velocity_one
boundary = 3
[]
[penalty_accumulated_slip_one]
type = MortarUserObjectAux
variable = accumulated_slip_one
user_object = friction_uo
contact_quantity = accumulated_slip_one
boundary = 3
[]
[normal_lm]
type = MortarUserObjectAux
variable = normal_lm
user_object = friction_uo
contact_quantity = normal_lm
boundary = 3
[]
[normal_gap]
type = MortarUserObjectAux
variable = normal_gap
user_object = friction_uo
contact_quantity = normal_gap
boundary = 3
[]
[]
[Postprocessors]
[bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[]
[bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[]
[top_react_x]
type = NodalSum
variable = saved_x
boundary = 4
[]
[top_react_y]
type = NodalSum
variable = saved_y
boundary = 4
[]
[_dt]
type = TimestepSize
[]
[num_lin_it]
type = NumLinearIterations
[]
[num_nonlin_it]
type = NumNonlinearIterations
[]
[cumulative]
type = CumulativeValuePostprocessor
postprocessor = num_nonlin_it
[]
[gap]
type = SideExtremeValue
value_type = min
variable = normal_gap
boundary = 3
[]
[num_al]
type = NumAugmentedLagrangeIterations
[]
[active_set_size]
type = NodalSum
variable = active
[]
[]
[BCs]
[side_x]
type = DirichletBC
variable = disp_y
boundary = '1 2'
value = 0.0
[]
[bot_y]
type = DirichletBC
variable = disp_x
boundary = '1 2'
value = 0.0
[]
[top_y_disp]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = disp_ramp_vert
[]
[top_x_disp]
type = FunctionDirichletBC
variable = disp_x
boundary = 4
function = disp_ramp_horz
[]
[]
[Materials]
[stuff1_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e8
poissons_ratio = 0.0
[]
[stuff1_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[]
[stuff2_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2 3 4 5 6 7'
youngs_modulus = 1e6
poissons_ratio = 0.3
[]
[stuff2_stress]
type = ComputeFiniteStrainElasticStress
block = '2 3 4 5 6 7'
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = -pc_type
petsc_options_value = lu
line_search = 'basic'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-8
nl_max_its = 50
l_tol = 1e-05
l_abs_tol = 1e-13
start_time = 0.0
end_time = 0.2 # 3.5
dt = 0.1
dtmin = 0.1
[Predictor]
type = SimplePredictor
scale = 1.0
[]
automatic_scaling = true
compute_scaling_once = false
off_diagonals_in_auto_scaling = true
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[VectorPostprocessors]
[surface]
type = NodalValueSampler
use_displaced_mesh = false
variable = 'disp_x disp_y penalty_normal_pressure penalty_frictional_pressure normal_gap'
boundary = '3'
sort_by = id
[]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
exodus = true
csv = false
[vectorpp_output]
type = CSV
create_final_symlink = true
execute_on = 'INITIAL TIMESTEP_END FINAL'
[]
[]
[UserObjects]
[friction_uo]
type = PenaltyFrictionUserObject
primary_boundary = '2'
secondary_boundary = '3'
primary_subdomain = '10000'
secondary_subdomain = '10001'
disp_x = disp_x
disp_y = disp_y
penalty = 1e5
penalty_friction = 1e8
secondary_variable = disp_x
friction_coefficient = 0.4
penetration_tolerance = 1e-7
# Not solving the frictional problem tightly (below)
slip_tolerance = 1 # 1e-6
penalty_multiplier = 100
penalty_multiplier_friction = 1
use_physical_gap = true
aux_lm = dual_var
[]
[]
[Constraints]
[x]
type = NormalMortarMechanicalContact
primary_boundary = '2'
secondary_boundary = '3'
primary_subdomain = '10000'
secondary_subdomain = '10001'
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[y]
type = NormalMortarMechanicalContact
primary_boundary = '2'
secondary_boundary = '3'
primary_subdomain = '10000'
secondary_subdomain = '10001'
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[tangential_x]
type = TangentialMortarMechanicalContact
primary_boundary = 2
secondary_boundary = 3
primary_subdomain = 10000
secondary_subdomain = 10001
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[tangential_y]
type = TangentialMortarMechanicalContact
primary_boundary = 2
secondary_boundary = 3
primary_subdomain = 10000
secondary_subdomain = 10001
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[]
(modules/contact/test/tests/pdass_problems/cylinder_friction_penalty_normal_al_backup.i)
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Mesh]
[input_file]
type = FileMeshGenerator
file = hertz_cyl_finer.e
[]
[secondary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 10001
new_block_name = 'secondary_lower'
sidesets = '3'
input = input_file
[]
[primary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 10000
sidesets = '2'
new_block_name = 'primary_lower'
input = secondary
[]
allow_renumbering = false
[]
[Problem]
type = AugmentedLagrangianContactFEProblem
extra_tag_vectors = 'ref'
maximum_lagrangian_update_iterations = 1000
[]
[AuxVariables]
[penalty_normal_pressure]
[]
[penalty_frictional_pressure]
[]
[accumulated_slip_one]
[]
[tangential_vel_one]
[]
[normal_gap]
[]
[normal_lm]
[]
[saved_x]
[]
[saved_y]
[]
[active]
[]
[]
[Functions]
[disp_ramp_vert]
type = PiecewiseLinear
x = '0. 0.1 0.2'
y = '0. -0.020 0.0'
[]
[disp_ramp_horz]
type = PiecewiseLinear
x = '0. 1. 3.5'
y = '0. 0.0 0.015'
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
add_variables = true
save_in = 'saved_x saved_y'
extra_vector_tags = 'ref'
block = '1 2 3 4 5 6 7'
generate_output = 'stress_xx stress_yy stress_xy'
[]
[AuxKernels]
[penalty_normal_pressure]
type = MortarUserObjectAux
variable = penalty_normal_pressure
user_object = friction_uo
contact_quantity = normal_pressure
boundary = 3
[]
[normal_lm]
type = MortarUserObjectAux
variable = normal_lm
user_object = friction_uo
contact_quantity = normal_lm
boundary = 3
[]
[normal_gap]
type = MortarUserObjectAux
variable = normal_gap
user_object = friction_uo
contact_quantity = normal_gap
boundary = 3
[]
[]
[Postprocessors]
[bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[]
[bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[]
[top_react_x]
type = NodalSum
variable = saved_x
boundary = 4
[]
[top_react_y]
type = NodalSum
variable = saved_y
boundary = 4
[]
[_dt]
type = TimestepSize
[]
[num_lin_it]
type = NumLinearIterations
[]
[num_nonlin_it]
type = NumNonlinearIterations
[]
[cumulative]
type = CumulativeValuePostprocessor
postprocessor = num_nonlin_it
[]
[gap]
type = SideExtremeValue
value_type = min
variable = normal_gap
boundary = 3
[]
[num_al]
type = NumAugmentedLagrangeIterations
[]
[active_set_size]
type = NodalSum
variable = active
[]
[]
[BCs]
[side_x]
type = DirichletBC
variable = disp_y
boundary = '1 2'
value = 0.0
[]
[bot_y]
type = DirichletBC
variable = disp_x
boundary = '1 2'
value = 0.0
[]
[top_y_disp]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = disp_ramp_vert
[]
[top_x_disp]
type = FunctionDirichletBC
variable = disp_x
boundary = 4
function = disp_ramp_horz
[]
[]
[Materials]
[stuff1_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e8
poissons_ratio = 0.0
[]
[stuff1_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[]
[stuff2_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2 3 4 5 6 7'
youngs_modulus = 1e6
poissons_ratio = 0.3
[]
[stuff2_stress]
type = ComputeFiniteStrainElasticStress
block = '2 3 4 5 6 7'
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = -pc_type
petsc_options_value = lu
line_search = 'none'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-8
nl_max_its = 1300
l_tol = 1e-05
l_abs_tol = 1e-13
start_time = 0.0
end_time = 0.2 # 3.5
dt = 0.1
dtmin = 0.001
[Predictor]
type = SimplePredictor
scale = 1.0
[]
automatic_scaling = true
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[VectorPostprocessors]
[surface]
type = NodalValueSampler
use_displaced_mesh = false
variable = 'disp_x disp_y penalty_normal_pressure normal_gap'
boundary = '3'
sort_by = id
[]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
exodus = true
csv = false
[vectorpp_output]
type = CSV
create_final_symlink = true
execute_on = 'INITIAL TIMESTEP_END FINAL'
[]
[]
[UserObjects]
[friction_uo]
type = PenaltyWeightedGapUserObject
primary_boundary = '2'
secondary_boundary = '3'
primary_subdomain = '10000'
secondary_subdomain = '10001'
disp_x = disp_x
disp_y = disp_y
penalty = 1e7
penalty_multiplier = 10
penetration_tolerance = 1e-12
use_physical_gap = true
[]
[]
[Constraints]
[x]
type = NormalMortarMechanicalContact
primary_boundary = '2'
secondary_boundary = '3'
primary_subdomain = '10000'
secondary_subdomain = '10001'
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[y]
type = NormalMortarMechanicalContact
primary_boundary = '2'
secondary_boundary = '3'
primary_subdomain = '10000'
secondary_subdomain = '10001'
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[]
(modules/contact/test/tests/pdass_problems/cylinder_friction_penalty_frictional_al_tight_slip.i)
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Mesh]
[input_file]
type = FileMeshGenerator
file = hertz_cyl_finer.e
[]
[secondary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 10001
new_block_name = 'secondary_lower'
sidesets = '3'
input = input_file
[]
[primary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 10000
sidesets = '2'
new_block_name = 'primary_lower'
input = secondary
[]
allow_renumbering = false
[]
[Problem]
type = AugmentedLagrangianContactFEProblem
extra_tag_vectors = 'ref'
maximum_lagrangian_update_iterations = 1000
[]
[AuxVariables]
[penalty_normal_pressure]
[]
[penalty_frictional_pressure]
[]
[accumulated_slip_one]
[]
[tangential_vel_one]
[]
[normal_gap]
[]
[normal_lm]
[]
[saved_x]
[]
[saved_y]
[]
[active]
[]
[dual_var]
use_dual = true
block = '10001'
[]
[]
[Functions]
[disp_ramp_vert]
type = PiecewiseLinear
x = '0. 1. 3.5'
y = '0. -0.020 -0.020'
[]
[disp_ramp_horz]
type = PiecewiseLinear
x = '0. 1. 3.5'
y = '0. 0.0 0.015'
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
add_variables = true
save_in = 'saved_x saved_y'
extra_vector_tags = 'ref'
block = '1 2 3 4 5 6 7'
generate_output = 'stress_xx stress_yy stress_xy'
[]
[AuxKernels]
[penalty_normal_pressure]
type = MortarUserObjectAux
variable = penalty_normal_pressure
user_object = friction_uo
contact_quantity = normal_pressure
boundary = 3
[]
[penalty_frictional_pressure]
type = MortarUserObjectAux
variable = penalty_frictional_pressure
user_object = friction_uo
contact_quantity = tangential_pressure_one
boundary = 3
[]
[penalty_tangential_vel_one]
type = MortarUserObjectAux
variable = tangential_vel_one
user_object = friction_uo
contact_quantity = tangential_velocity_one
boundary = 3
[]
[penalty_accumulated_slip_one]
type = MortarUserObjectAux
variable = accumulated_slip_one
user_object = friction_uo
contact_quantity = accumulated_slip_one
boundary = 3
[]
[normal_lm]
type = MortarUserObjectAux
variable = normal_lm
user_object = friction_uo
contact_quantity = normal_lm
boundary = 3
[]
[normal_gap]
type = MortarUserObjectAux
variable = normal_gap
user_object = friction_uo
contact_quantity = normal_gap
boundary = 3
[]
[]
[Postprocessors]
[bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[]
[bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[]
[top_react_x]
type = NodalSum
variable = saved_x
boundary = 4
[]
[top_react_y]
type = NodalSum
variable = saved_y
boundary = 4
[]
[_dt]
type = TimestepSize
[]
[num_lin_it]
type = NumLinearIterations
[]
[num_nonlin_it]
type = NumNonlinearIterations
[]
[cumulative]
type = CumulativeValuePostprocessor
postprocessor = num_nonlin_it
[]
[gap]
type = SideExtremeValue
value_type = min
variable = normal_gap
boundary = 3
[]
[num_al]
type = NumAugmentedLagrangeIterations
[]
[active_set_size]
type = NodalSum
variable = active
[]
[]
[BCs]
[side_x]
type = DirichletBC
variable = disp_y
boundary = '1 2'
value = 0.0
[]
[bot_y]
type = DirichletBC
variable = disp_x
boundary = '1 2'
value = 0.0
[]
[top_y_disp]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = disp_ramp_vert
[]
[top_x_disp]
type = FunctionDirichletBC
variable = disp_x
boundary = 4
function = disp_ramp_horz
[]
[]
[Materials]
[stuff1_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e10
poissons_ratio = 0.0
[]
[stuff1_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[]
[stuff2_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2 3 4 5 6 7'
youngs_modulus = 1e6
poissons_ratio = 0.3
[]
[stuff2_stress]
type = ComputeFiniteStrainElasticStress
block = '2 3 4 5 6 7'
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = -pc_type
petsc_options_value = lu
line_search = 'basic'
nl_abs_tol = 1e-13
nl_rel_tol = 1e-11
nl_max_its = 75
l_tol = 1e-05
l_abs_tol = 1e-13
start_time = 0.0
end_time = 0.1 # 3.5
dt = 0.1
dtmin = 0.1
[Predictor]
type = SimplePredictor
scale = 1.0
[]
automatic_scaling = true
compute_scaling_once = false
off_diagonals_in_auto_scaling = true
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[VectorPostprocessors]
[surface]
type = NodalValueSampler
use_displaced_mesh = false
variable = 'disp_x disp_y normal_gap'
boundary = '3'
sort_by = id
[]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
exodus = true
csv = false
[vectorpp_output]
type = CSV
create_final_symlink = true
execute_on = 'INITIAL TIMESTEP_END FINAL'
[]
[]
[UserObjects]
[friction_uo]
type = PenaltyFrictionUserObject
primary_boundary = '2'
secondary_boundary = '3'
primary_subdomain = '10000'
secondary_subdomain = '10001'
disp_x = disp_x
disp_y = disp_y
penalty = 1e5
secondary_variable = disp_x
friction_coefficient = 0.4
penetration_tolerance = 1e-7
slip_tolerance = 1e-8
penalty_friction = 1e6
penalty_multiplier = 10
use_physical_gap = true
aux_lm = dual_var
[]
[]
[Constraints]
[x]
type = NormalMortarMechanicalContact
primary_boundary = '2'
secondary_boundary = '3'
primary_subdomain = '10000'
secondary_subdomain = '10001'
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[y]
type = NormalMortarMechanicalContact
primary_boundary = '2'
secondary_boundary = '3'
primary_subdomain = '10000'
secondary_subdomain = '10001'
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[tangential_x]
type = TangentialMortarMechanicalContact
primary_boundary = 2
secondary_boundary = 3
primary_subdomain = 10000
secondary_subdomain = 10001
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[tangential_y]
type = TangentialMortarMechanicalContact
primary_boundary = 2
secondary_boundary = 3
primary_subdomain = 10000
secondary_subdomain = 10001
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[]
(modules/contact/test/tests/pdass_problems/cylinder_friction_penalty_adaptivity.i)
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Mesh]
[input_file]
type = FileMeshGenerator
file = hertz_cyl_coarser.e
[]
[secondary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 10001
new_block_name = 'secondary_lower'
sidesets = '3'
input = input_file
[]
[primary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 10000
sidesets = '2'
new_block_name = 'primary_lower'
input = secondary
[]
allow_renumbering = false
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[disp_x]
order = FIRST
family = LAGRANGE
[]
[disp_y]
order = FIRST
family = LAGRANGE
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
extra_vector_tags = 'ref'
block = '1 2 3 4 5 6 7'
generate_output = 'stress_xx stress_yy stress_xy'
[]
[AuxVariables]
[penalty_normal_pressure]
[]
[penalty_frictional_pressure]
[]
[accumulated_slip_one]
[]
[tangential_vel_one]
[]
[normal_gap]
[]
[react_x]
[]
[react_y]
[]
[]
[Functions]
[disp_ramp_vert]
type = PiecewiseLinear
x = '0. 1. 3.5'
y = '0. -0.020 -0.020'
[]
[disp_ramp_horz]
type = PiecewiseLinear
x = '0. 1. 3.5'
y = '0. 0.0 0.015'
[]
[]
[AuxKernels]
[penalty_normal_pressure]
type = MortarUserObjectAux
variable = penalty_normal_pressure
user_object = friction_uo
contact_quantity = normal_pressure
[]
[penalty_frictional_pressure]
type = MortarUserObjectAux
variable = penalty_frictional_pressure
user_object = friction_uo
contact_quantity = tangential_pressure_one
[]
[penalty_accumulated_slip]
type = MortarUserObjectAux
variable = accumulated_slip_one
user_object = friction_uo
contact_quantity = accumulated_slip_one
[]
[penalty_tangential_vel]
type = MortarUserObjectAux
variable = tangential_vel_one
user_object = friction_uo
contact_quantity = tangential_velocity_one
[]
[penalty_gap]
type = MortarUserObjectAux
variable = normal_gap
user_object = friction_uo
contact_quantity = normal_gap
[]
[react_x]
type = ReactionForceAux
vector_tag = 'ref'
v = 'disp_x'
variable = 'react_x'
[]
[react_y]
type = ReactionForceAux
vector_tag = 'ref'
v = 'disp_y'
variable = 'react_y'
[]
[]
[Postprocessors]
[bot_react_x]
type = NodalSum
variable = react_x
boundary = 1
[]
[bot_react_y]
type = NodalSum
variable = react_y
boundary = 1
[]
[top_react_x]
type = NodalSum
variable = react_x
boundary = 4
[]
[top_react_y]
type = NodalSum
variable = react_y
boundary = 4
[]
[_dt]
type = TimestepSize
[]
[num_lin_it]
type = NumLinearIterations
[]
[num_nonlin_it]
type = NumNonlinearIterations
[]
[cumulative]
type = CumulativeValuePostprocessor
postprocessor = num_nonlin_it
[]
[gap]
type = SideExtremeValue
value_type = min
variable = normal_gap
boundary = 3
[]
[num_al]
type = NumAugmentedLagrangeIterations
[]
[]
[BCs]
[side_x]
type = DirichletBC
variable = disp_y
boundary = '1 2'
value = 0.0
[]
[bot_y]
type = DirichletBC
variable = disp_x
boundary = '1 2'
value = 0.0
[]
[top_y_disp]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = disp_ramp_vert
[]
[top_x_disp]
type = FunctionDirichletBC
variable = disp_x
boundary = 4
function = disp_ramp_horz
[]
[]
[Materials]
[stuff1_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e10
poissons_ratio = 0.0
[]
[stuff1_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[]
[stuff2_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2 3 4 5 6 7'
youngs_modulus = 1e6
poissons_ratio = 0.3
[]
[stuff2_stress]
type = ComputeFiniteStrainElasticStress
block = '2 3 4 5 6 7'
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_type -pc_factor_shift_type -pc_factor_shift_amount -mat_mffd_err'
petsc_options_value = 'lu superlu_dist NONZERO 1e-15 1e-5'
line_search = 'none'
nl_abs_tol = 1e-10
start_time = 0.0
end_time = 0.3 # 3.5
l_tol = 1e-4
dt = 0.1
dtmin = 0.001
[Predictor]
type = SimplePredictor
scale = 1.0
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[VectorPostprocessors]
[surface]
type = NodalValueSampler
use_displaced_mesh = false
variable = 'disp_x disp_y penalty_normal_pressure penalty_frictional_pressure normal_gap'
boundary = '3'
sort_by = id
[]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
exodus = true
csv = false
[console]
type = Console
max_rows = 5
[]
[vectorpp_output]
type = CSV
create_final_symlink = true
file_base = cylinder_friction_penalty_adaptivity
execute_on = 'INITIAL TIMESTEP_END FINAL'
[]
[]
[UserObjects]
[friction_uo]
type = PenaltyFrictionUserObject
primary_boundary = '2'
secondary_boundary = '3'
primary_subdomain = '10000'
secondary_subdomain = '10001'
disp_x = disp_x
disp_y = disp_y
friction_coefficient = 0.4
secondary_variable = disp_x
penalty = 5e7
penalty_friction = 5e8
[]
[geo]
type = GeometrySphere
boundary = 3
center = '0 4 0'
radius = 3
[]
[]
[Adaptivity]
[Markers]
[contact]
type = BoundaryMarker
mark = REFINE
next_to = 3
[]
[]
initial_marker = contact
initial_steps = 2
[]
[Constraints]
[x]
type = NormalMortarMechanicalContact
primary_boundary = '2'
secondary_boundary = '3'
primary_subdomain = '10000'
secondary_subdomain = '10001'
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[y]
type = NormalMortarMechanicalContact
primary_boundary = '2'
secondary_boundary = '3'
primary_subdomain = '10000'
secondary_subdomain = '10001'
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[tangential_x]
type = TangentialMortarMechanicalContact
primary_boundary = 2
secondary_boundary = 3
primary_subdomain = 10000
secondary_subdomain = 10001
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[tangential_y]
type = TangentialMortarMechanicalContact
primary_boundary = 2
secondary_boundary = 3
primary_subdomain = 10000
secondary_subdomain = 10001
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[]
(modules/contact/test/tests/pdass_problems/cylinder_friction_penalty_normal_al.i)
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Mesh]
[input_file]
type = FileMeshGenerator
file = hertz_cyl_finer.e
[]
[secondary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 10001
new_block_name = 'secondary_lower'
sidesets = '3'
input = input_file
[]
[primary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 10000
sidesets = '2'
new_block_name = 'primary_lower'
input = secondary
[]
allow_renumbering = false
[]
[Problem]
type = AugmentedLagrangianContactFEProblem
extra_tag_vectors = 'ref'
[]
[AuxVariables]
[penalty_normal_pressure]
[]
[accumulated_slip_one]
[]
[tangential_vel_one]
[]
[normal_gap]
[]
[normal_lm]
[]
[saved_x]
[]
[saved_y]
[]
[active]
[]
[]
[Functions]
[disp_ramp_vert]
type = PiecewiseLinear
x = '0. 1. 3.5'
y = '0. -0.020 -0.020'
[]
[disp_ramp_horz]
type = PiecewiseLinear
x = '0. 1. 3.5'
y = '0. 0.0 0.015'
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
add_variables = true
save_in = 'saved_x saved_y'
extra_vector_tags = 'ref'
block = '1 2 3 4 5 6 7'
generate_output = 'stress_xx stress_yy stress_xy'
[]
[AuxKernels]
[penalty_normal_pressure]
type = MortarUserObjectAux
variable = penalty_normal_pressure
user_object = friction_uo
contact_quantity = normal_pressure
boundary = 3
[]
[normal_lm]
type = MortarUserObjectAux
variable = normal_lm
user_object = friction_uo
contact_quantity = normal_lm
boundary = 3
[]
[normal_gap]
type = MortarUserObjectAux
variable = normal_gap
user_object = friction_uo
contact_quantity = normal_gap
boundary = 3
[]
[]
[Postprocessors]
[bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[]
[bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[]
[top_react_x]
type = NodalSum
variable = saved_x
boundary = 4
[]
[top_react_y]
type = NodalSum
variable = saved_y
boundary = 4
[]
[_dt]
type = TimestepSize
[]
[num_lin_it]
type = NumLinearIterations
[]
[num_nonlin_it]
type = NumNonlinearIterations
[]
[cumulative]
type = CumulativeValuePostprocessor
postprocessor = num_nonlin_it
[]
[gap]
type = SideExtremeValue
value_type = min
variable = normal_gap
boundary = 3
[]
[num_al]
type = NumAugmentedLagrangeIterations
[]
[active_set_size]
type = NodalSum
variable = active
[]
[]
[BCs]
[side_x]
type = DirichletBC
variable = disp_y
boundary = '1 2'
value = 0.0
[]
[bot_y]
type = DirichletBC
variable = disp_x
boundary = '1 2'
value = 0.0
[]
[top_y_disp]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = disp_ramp_vert
[]
[top_x_disp]
type = FunctionDirichletBC
variable = disp_x
boundary = 4
function = disp_ramp_horz
[]
[]
[Materials]
[stuff1_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e8
poissons_ratio = 0.0
[]
[stuff1_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[]
[stuff2_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2 3 4 5 6 7'
youngs_modulus = 1e6
poissons_ratio = 0.3
[]
[stuff2_stress]
type = ComputeFiniteStrainElasticStress
block = '2 3 4 5 6 7'
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = -pc_type
petsc_options_value = lu
line_search = 'none'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-8
nl_max_its = 1300
l_tol = 1e-05
l_abs_tol = 1e-13
start_time = 0.0
end_time = 0.2 # 3.5
dt = 0.1
dtmin = 0.001
[Predictor]
type = SimplePredictor
scale = 1.0
[]
automatic_scaling = true
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[VectorPostprocessors]
[surface]
type = NodalValueSampler
use_displaced_mesh = false
variable = 'disp_x disp_y penalty_normal_pressure normal_gap'
boundary = '3'
sort_by = id
[]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
exodus = true
csv = false
[vectorpp_output]
type = CSV
create_final_symlink = true
execute_on = 'INITIAL TIMESTEP_END FINAL'
[]
[]
[UserObjects]
[friction_uo]
type = PenaltyWeightedGapUserObject
primary_boundary = '2'
secondary_boundary = '3'
primary_subdomain = '10000'
secondary_subdomain = '10001'
disp_x = disp_x
disp_y = disp_y
penalty = 1e7
penetration_tolerance = 1e-12
use_physical_gap = true
[]
[]
[Constraints]
[x]
type = NormalMortarMechanicalContact
primary_boundary = '2'
secondary_boundary = '3'
primary_subdomain = '10000'
secondary_subdomain = '10001'
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[y]
type = NormalMortarMechanicalContact
primary_boundary = '2'
secondary_boundary = '3'
primary_subdomain = '10000'
secondary_subdomain = '10001'
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[]
(modules/contact/test/tests/pdass_problems/ironing_penalty_action.i)
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Mesh]
[input_file]
type = FileMeshGenerator
file = iron.e
[]
patch_update_strategy = auto
patch_size = 20
allow_renumbering = false
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[]
[AuxVariables]
[penalty_normal_pressure]
order = FIRST
family = LAGRANGE
[]
[penalty_frictional_pressure]
order = FIRST
family = LAGRANGE
[]
[accumulated_slip_one]
order = FIRST
family = LAGRANGE
[]
[tangential_vel_one]
order = FIRST
family = LAGRANGE
[]
[real_weighted_gap]
order = FIRST
family = LAGRANGE
[]
[stress_xx]
order = CONSTANT
family = MONOMIAL
[]
[stress_yy]
order = CONSTANT
family = MONOMIAL
[]
[stress_xy]
order = CONSTANT
family = MONOMIAL
[]
[saved_x]
[]
[saved_y]
[]
[diag_saved_x]
[]
[diag_saved_y]
[]
[von_mises]
order = CONSTANT
family = MONOMIAL
[]
[]
[Functions]
[disp_ramp_vert]
type = PiecewiseLinear
x = '0. 2. 8.'
y = '0. -1.0 -1.0'
[]
[disp_ramp_horz]
type = PiecewiseLinear
x = '0. 8.'
y = '0. 8.'
[]
[]
[Kernels]
[TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
block = '1 2'
strain = FINITE
[]
[]
[AuxKernels]
[penalty_normal_pressure_auxk]
type = MortarUserObjectAux
variable = penalty_normal_pressure
user_object = penalty_friction_object_contact_block
contact_quantity = normal_pressure
[]
[penalty_frictional_pressure_auxk]
type = MortarUserObjectAux
variable = penalty_frictional_pressure
user_object = penalty_friction_object_contact_block
contact_quantity = tangential_pressure_one
[]
[penalty_accumulated_slip_auxk]
type = MortarUserObjectAux
variable = accumulated_slip_one
user_object = penalty_friction_object_contact_block
contact_quantity = accumulated_slip_one
[]
[penalty_tangential_vel_auxk]
type = MortarUserObjectAux
variable = tangential_vel_one
user_object = penalty_friction_object_contact_block
contact_quantity = tangential_velocity_one
[]
[real_weighted_gap_auxk]
type = MortarUserObjectAux
variable = real_weighted_gap
user_object = penalty_friction_object_contact_block
contact_quantity = normal_gap
[]
[stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
block = '1 2'
[]
[stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
block = '1 2'
[]
[stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
block = '1 2'
[]
[von_mises_kernel]
#Calculates the von mises stress and assigns it to von_mises
type = RankTwoScalarAux
variable = von_mises
rank_two_tensor = stress
execute_on = timestep_end
scalar_type = VonMisesStress
block = '1 2'
[]
[]
[Contact]
[contact_block]
primary = 20
secondary = 10
friction_coefficient = 0.1
model = coulomb
formulation = mortar_penalty
penalty = 1e5
penalty_friction = 1e4
use_dual = false
[]
[]
[VectorPostprocessors]
[penalty_normal_pressure]
type = NodalValueSampler
variable = penalty_normal_pressure
boundary = 10
sort_by = id
[]
[]
[Postprocessors]
[top_react_x]
type = NodalSum
variable = saved_x
boundary = 30
[]
[top_react_y]
type = NodalSum
variable = saved_y
boundary = 30
[]
[]
[BCs]
[bot_x_disp]
type = DirichletBC
variable = disp_x
boundary = '40'
value = 0.0
preset = false
[]
[bot_y_disp]
type = DirichletBC
variable = disp_y
boundary = '40'
value = 0.0
preset = false
[]
[top_y_disp]
type = FunctionDirichletBC
variable = disp_y
boundary = '30'
function = disp_ramp_vert
preset = false
[]
[top_x_disp]
type = FunctionDirichletBC
variable = disp_x
boundary = '30'
function = disp_ramp_horz
preset = false
[]
[]
[Materials]
[stuff1_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 6896
poissons_ratio = 0.32
[]
[stuff1_strain]
type = ComputeFiniteStrain
block = '2'
[]
[stuff1_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[]
[stuff2_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 689.6
poissons_ratio = 0.32
[]
[stuff2_strain]
type = ComputeFiniteStrain
block = '1'
[]
[stuff2_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_type'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
nl_rel_tol = 1e-7
l_tol = 1e-6
l_max_its = 50
nl_max_its = 30
start_time = 0.0
end_time = 6.5 # 6.5
dt = 0.0125
dtmin = 1e-5
[Predictor]
type = SimplePredictor
scale = 1.0
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
exodus = true
csv = true
[chkfile]
type = CSV
start_time = 0.0
execute_vector_postprocessors_on = FINAL
[]
[console]
type = Console
max_rows = 5
[]
[]
[Debug]
show_var_residual_norms = true
[]
(modules/contact/test/tests/pdass_problems/cylinder_friction_penalty_frictional_al_action_amg_tight.i)
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Mesh]
[input_file]
type = FileMeshGenerator
file = cond_number.e
[]
allow_renumbering = false
[]
[Problem]
type = AugmentedLagrangianContactFEProblem
extra_tag_vectors = 'ref'
maximum_lagrangian_update_iterations = 1000
[]
[AuxVariables]
[penalty_normal_pressure]
[]
[penalty_frictional_pressure]
[]
[accumulated_slip_one]
[]
[tangential_vel_one]
[]
[normal_gap]
[]
[normal_lm]
[]
[saved_x]
[]
[saved_y]
[]
[active]
[]
[pid]
[]
[]
[Functions]
[disp_ramp_vert]
type = PiecewiseLinear
x = '0. 1. 3.5'
y = '0. -0.020 -0.020'
[]
[disp_ramp_horz]
type = PiecewiseLinear
x = '0. 1. 3.5'
y = '0. 0.0 0.015'
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
add_variables = true
save_in = 'saved_x saved_y'
extra_vector_tags = 'ref'
block = '1 2 3 4 5 6 7'
generate_output = 'stress_xx stress_yy stress_xy'
[]
[AuxKernels]
[pid]
type = ProcessorIDAux
variable = pid
[]
[penalty_normal_pressure]
type = MortarUserObjectAux
variable = penalty_normal_pressure
user_object = penalty_friction_object_al_friction
contact_quantity = normal_pressure
boundary = 3
[]
[penalty_frictional_pressure]
type = MortarUserObjectAux
variable = penalty_frictional_pressure
user_object = penalty_friction_object_al_friction
contact_quantity = tangential_pressure_one
boundary = 3
[]
[penalty_tangential_vel_one]
type = MortarUserObjectAux
variable = tangential_vel_one
user_object = penalty_friction_object_al_friction
contact_quantity = tangential_velocity_one
boundary = 3
[]
[penalty_accumulated_slip_one]
type = MortarUserObjectAux
variable = accumulated_slip_one
user_object = penalty_friction_object_al_friction
contact_quantity = accumulated_slip_one
boundary = 3
[]
[normal_lm]
type = MortarUserObjectAux
variable = normal_lm
user_object = penalty_friction_object_al_friction
contact_quantity = normal_lm
boundary = 3
[]
[normal_gap]
type = MortarUserObjectAux
variable = normal_gap
user_object = penalty_friction_object_al_friction
contact_quantity = normal_gap
boundary = 3
[]
[]
[Postprocessors]
[bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[]
[bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[]
[top_react_x]
type = NodalSum
variable = saved_x
boundary = 4
[]
[top_react_y]
type = NodalSum
variable = saved_y
boundary = 4
[]
[_dt]
type = TimestepSize
[]
[num_lin_it]
type = NumLinearIterations
[]
[num_nonlin_it]
type = NumNonlinearIterations
[]
[cumulative]
type = CumulativeValuePostprocessor
postprocessor = num_nonlin_it
[]
[gap]
type = SideExtremeValue
value_type = min
variable = normal_gap
boundary = 3
[]
[num_al]
type = NumAugmentedLagrangeIterations
[]
[active_set_size]
type = NodalSum
variable = active
[]
[]
[BCs]
[side_x]
type = DirichletBC
variable = disp_y
boundary = '1 2'
value = 0.0
[]
[bot_y]
type = DirichletBC
variable = disp_x
boundary = '1 2'
value = 0.0
[]
[top_y_disp]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = disp_ramp_vert
[]
[top_x_disp]
type = FunctionDirichletBC
variable = disp_x
boundary = 4
function = disp_ramp_horz
[]
[]
[Materials]
[stuff1_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e8
poissons_ratio = 0.0
[]
[stuff1_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[]
[stuff2_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2 3 4 5 6 7'
youngs_modulus = 1e6
poissons_ratio = 0.3
[]
[stuff2_stress]
type = ComputeFiniteStrainElasticStress
block = '2 3 4 5 6 7'
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options = '-ksp_snes_ew'
petsc_options_iname = '-ksp_gmres_restart -pc_type -pc_hypre_type -pc_hypre_boomeramg_max_iter'
petsc_options_value = ' 201 hypre boomeramg 8'
line_search = 'none'
nl_abs_tol = 1e-12
nl_rel_tol = 1e-10
nl_max_its = 150
l_tol = 1e-05
l_abs_tol = 1e-13
start_time = 0.0
end_time = 0.1 # 1.0
dt = 0.1
dtmin = 0.1
[Predictor]
type = SimplePredictor
scale = 1.0
[]
automatic_scaling = true
compute_scaling_once = false
off_diagonals_in_auto_scaling = true
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[VectorPostprocessors]
[surface]
type = NodalValueSampler
use_displaced_mesh = false
variable = 'disp_x disp_y penalty_normal_pressure penalty_frictional_pressure normal_gap'
boundary = '3'
sort_by = id
[]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
exodus = true
csv = false
[vectorpp_output]
type = CSV
create_final_symlink = true
execute_on = 'INITIAL TIMESTEP_END FINAL'
[]
[]
[Contact]
[al_friction]
formulation = mortar_penalty
model = coulomb
primary = '2'
secondary = '3'
penalty = 1e7
penalty_friction = 1e+7
friction_coefficient = 0.4
al_penetration_tolerance = 1e-7
al_incremental_slip_tolerance = 1e-7
adaptivity_penalty_normal = BUSSETTA
adaptivity_penalty_friction = FRICTION_LIMIT
penalty_multiplier = 5
penalty_multiplier_friction = 5
[]
[]
(modules/contact/test/tests/mortar_augmented_lagrange/aux_errors.i)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 1
[]
[]
[Problem]
solve = false
[]
[UserObjects]
[dummy]
type = TimestepSize
[]
[]
[Executioner]
type = Steady
[]
[AuxVariables]
[v]
[]
[]
[AuxKernels]
[gap]
type = MortarUserObjectAux
variable = v
user_object = dummy
# contact_quantity =
[]
[]
(modules/contact/test/tests/3d-mortar-contact/frictionless-mortar-3d-penalty.i)
starting_point = 0.25
offset = 0.00
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
volumetric_locking_correction = true
[]
[AuxVariables]
[penalty_normal_pressure]
order = FIRST
family = LAGRANGE
[]
[]
[AuxKernels]
[penalty_normal_pressure_auxk]
type = MortarUserObjectAux
variable = penalty_normal_pressure
user_object = normal_uo
contact_quantity = normal_pressure
[]
[]
[Mesh]
[top_block]
type = GeneratedMeshGenerator
dim = 3
nx = 3
ny = 3
nz = 3
xmin = -0.25
xmax = 0.25
ymin = -0.25
ymax = 0.25
zmin = -0.25
zmax = 0.25
elem_type = HEX8
[]
[rotate_top_block]
type = TransformGenerator
input = top_block
transform = ROTATE
vector_value = '0 0 0'
[]
[top_block_sidesets]
type = RenameBoundaryGenerator
input = rotate_top_block
old_boundary = '0 1 2 3 4 5'
new_boundary = 'top_bottom top_back top_right top_front top_left top_top'
[]
[top_block_id]
type = SubdomainIDGenerator
input = top_block_sidesets
subdomain_id = 1
[]
[bottom_block]
type = GeneratedMeshGenerator
dim = 3
nx = 10
ny = 10
nz = 2
xmin = -.5
xmax = .5
ymin = -.5
ymax = .5
zmin = -.3
zmax = -.25
elem_type = HEX8
[]
[bottom_block_id]
type = SubdomainIDGenerator
input = bottom_block
subdomain_id = 2
[]
[bottom_block_change_boundary_id]
type = RenameBoundaryGenerator
input = bottom_block_id
old_boundary = '0 1 2 3 4 5'
new_boundary = '100 101 102 103 104 105'
[]
[combined]
type = MeshCollectionGenerator
inputs = 'top_block_id bottom_block_change_boundary_id'
[]
[block_rename]
type = RenameBlockGenerator
input = combined
old_block = '1 2'
new_block = 'top_block bottom_block'
[]
[bottom_right_sideset]
type = SideSetsAroundSubdomainGenerator
input = block_rename
new_boundary = bottom_right
block = bottom_block
normal = '1 0 0'
[]
[bottom_left_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_right_sideset
new_boundary = bottom_left
block = bottom_block
normal = '-1 0 0'
[]
[bottom_top_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_left_sideset
new_boundary = bottom_top
block = bottom_block
normal = '0 0 1'
[]
[bottom_bottom_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_top_sideset
new_boundary = bottom_bottom
block = bottom_block
normal = '0 0 -1'
[]
[bottom_front_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_bottom_sideset
new_boundary = bottom_front
block = bottom_block
normal = '0 1 0'
[]
[bottom_back_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_front_sideset
new_boundary = bottom_back
block = bottom_block
normal = '0 -1 0'
[]
[secondary]
input = bottom_back_sideset
type = LowerDBlockFromSidesetGenerator
sidesets = 'top_bottom' # top_back top_left'
new_block_id = '10001'
new_block_name = 'secondary_lower'
[]
[primary]
input = secondary
type = LowerDBlockFromSidesetGenerator
sidesets = 'bottom_top'
new_block_id = '10000'
new_block_name = 'primary_lower'
[]
uniform_refine = 0
allow_renumbering = false
[]
[Variables]
[]
[Physics/SolidMechanics/QuasiStatic]
[all]
add_variables = true
strain = FINITE
block = '1 2'
use_automatic_differentiation = false
generate_output = 'stress_xx stress_xy stress_xz stress_yy stress_zz'
[]
[]
[Materials]
[tensor]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1.0e4
poissons_ratio = 0.0
[]
[stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[]
[tensor_1000]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e5
poissons_ratio = 0.0
[]
[stress_1000]
type = ComputeFiniteStrainElasticStress
block = '2'
[]
[]
# Other object should mix formulations
[UserObjects]
[normal_uo]
type = PenaltyWeightedGapUserObject
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
penalty = 1e8
[]
[]
[Constraints]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = normal_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = normal_uo
[]
[normal_z]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
secondary_variable = disp_z
component = z
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = normal_uo
[]
[]
[BCs]
[botx]
type = DirichletBC
variable = disp_x
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[boty]
type = DirichletBC
variable = disp_y
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[botz]
type = DirichletBC
variable = disp_z
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[topx]
type = DirichletBC
variable = disp_x
boundary = 'top_top'
value = 0.0
[]
[topy]
type = DirichletBC
variable = disp_y
boundary = 'top_top'
value = 0.0
[]
[topz]
type = FunctionDirichletBC
variable = disp_z
boundary = 'top_top'
function = '-${starting_point} * sin(2 * pi / 40 * t) + ${offset}'
[]
[]
[Executioner]
type = Transient
end_time = .025
dt = .025
dtmin = .001
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason -snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_type'
petsc_options_value = 'lu superlu_dist'
l_max_its = 15
nl_max_its = 30
nl_rel_tol = 1e-11
nl_abs_tol = 1e-12
line_search = 'basic'
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
exodus = true
csv = true
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
[]
[VectorPostprocessors]
[]
(modules/contact/test/tests/3d-mortar-contact/frictional-mortar-3d-penalty.i)
starting_point = 0.25
offset = 0.00
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
volumetric_locking_correction = true
[]
[AuxVariables]
[penalty_normal_pressure]
order = FIRST
family = LAGRANGE
[]
[penalty_frictional_pressure_one]
order = FIRST
family = LAGRANGE
[]
[accumulated_slip_one]
order = FIRST
family = LAGRANGE
[]
[penalty_frictional_pressure_two]
order = FIRST
family = LAGRANGE
[]
[accumulated_slip_two]
order = FIRST
family = LAGRANGE
[]
[]
[AuxKernels]
[penalty_normal_pressure_auxk]
type = MortarUserObjectAux
variable = penalty_normal_pressure
user_object = friction_uo
contact_quantity = normal_pressure
[]
[penalty_frictional_pressure_one_auxk]
type = MortarUserObjectAux
variable = penalty_frictional_pressure_one
user_object = friction_uo
contact_quantity = tangential_pressure_one
[]
[penalty_accumulated_slip_auxk]
type = MortarUserObjectAux
variable = accumulated_slip_one
user_object = friction_uo
contact_quantity = accumulated_slip_one
[]
[penalty_frictional_pressure_two_auxk]
type = MortarUserObjectAux
variable = penalty_frictional_pressure_two
user_object = friction_uo
contact_quantity = tangential_pressure_two
[]
[penalty_accumulated_slip_two_auxk]
type = MortarUserObjectAux
variable = accumulated_slip_two
user_object = friction_uo
contact_quantity = accumulated_slip_two
[]
[]
[Mesh]
[top_block]
type = GeneratedMeshGenerator
dim = 3
nx = 3
ny = 3
nz = 3
xmin = -0.25
xmax = 0.25
ymin = -0.25
ymax = 0.25
zmin = -0.25
zmax = 0.25
elem_type = HEX8
[]
[rotate_top_block]
type = TransformGenerator
input = top_block
transform = ROTATE
vector_value = '0 0 0'
[]
[top_block_sidesets]
type = RenameBoundaryGenerator
input = rotate_top_block
old_boundary = '0 1 2 3 4 5'
new_boundary = 'top_bottom top_back top_right top_front top_left top_top'
[]
[top_block_id]
type = SubdomainIDGenerator
input = top_block_sidesets
subdomain_id = 1
[]
[bottom_block]
type = GeneratedMeshGenerator
dim = 3
nx = 10
ny = 10
nz = 2
xmin = -.5
xmax = .5
ymin = -.5
ymax = .5
zmin = -.3
zmax = -.25
elem_type = HEX8
[]
[bottom_block_id]
type = SubdomainIDGenerator
input = bottom_block
subdomain_id = 2
[]
[bottom_block_change_boundary_id]
type = RenameBoundaryGenerator
input = bottom_block_id
old_boundary = '0 1 2 3 4 5'
new_boundary = '100 101 102 103 104 105'
[]
[combined]
type = MeshCollectionGenerator
inputs = 'top_block_id bottom_block_change_boundary_id'
[]
[block_rename]
type = RenameBlockGenerator
input = combined
old_block = '1 2'
new_block = 'top_block bottom_block'
[]
[bottom_right_sideset]
type = SideSetsAroundSubdomainGenerator
input = block_rename
new_boundary = bottom_right
block = bottom_block
normal = '1 0 0'
[]
[bottom_left_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_right_sideset
new_boundary = bottom_left
block = bottom_block
normal = '-1 0 0'
[]
[bottom_top_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_left_sideset
new_boundary = bottom_top
block = bottom_block
normal = '0 0 1'
[]
[bottom_bottom_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_top_sideset
new_boundary = bottom_bottom
block = bottom_block
normal = '0 0 -1'
[]
[bottom_front_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_bottom_sideset
new_boundary = bottom_front
block = bottom_block
normal = '0 1 0'
[]
[bottom_back_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_front_sideset
new_boundary = bottom_back
block = bottom_block
normal = '0 -1 0'
[]
[secondary]
input = bottom_back_sideset
type = LowerDBlockFromSidesetGenerator
sidesets = 'top_bottom' # top_back top_left'
new_block_id = '10001'
new_block_name = 'secondary_lower'
[]
[primary]
input = secondary
type = LowerDBlockFromSidesetGenerator
sidesets = 'bottom_top'
new_block_id = '10000'
new_block_name = 'primary_lower'
[]
allow_renumbering = false
[]
[Variables]
[]
[Physics/SolidMechanics/QuasiStatic]
[all]
add_variables = true
strain = FINITE
block = '1 2'
use_automatic_differentiation = false
generate_output = 'stress_xx stress_xy stress_xz stress_yy stress_zz'
[]
[]
[Materials]
[tensor]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1.0e5
poissons_ratio = 0.0
[]
[stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[]
[tensor_1000]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e5
poissons_ratio = 0.0
[]
[stress_1000]
type = ComputeFiniteStrainElasticStress
block = '2'
[]
[]
# Other object should mix formulations
[UserObjects]
[friction_uo]
type = PenaltyFrictionUserObject
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
friction_coefficient = 0.4
secondary_variable = disp_x
penalty = 1e8
penalty_friction = 5e6
[]
[]
[Constraints]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[normal_z]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
secondary_variable = disp_z
component = z
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[tangential_x]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[tangential_y]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[tangential_z]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
secondary_variable = disp_z
component = z
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[tangential_dir_x]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
secondary_variable = disp_x
component = x
direction = direction_2
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[tangential_dir_y]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
secondary_variable = disp_y
component = y
direction = direction_2
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[tangential_dir_z]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
secondary_variable = disp_z
component = z
direction = direction_2
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[]
[BCs]
[botx]
type = DirichletBC
variable = disp_x
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[boty]
type = DirichletBC
variable = disp_y
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[botz]
type = DirichletBC
variable = disp_z
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[topx]
type = DirichletBC
variable = disp_x
boundary = 'top_top'
value = 0.0
[]
[topy]
type = DirichletBC
variable = disp_y
boundary = 'top_top'
value = 0.0
[]
[topz]
type = FunctionDirichletBC
variable = disp_z
boundary = 'top_top'
function = '-${starting_point} * sin(2 * pi / 40 * t) + ${offset}'
[]
[]
[Executioner]
type = Transient
end_time = .025
dt = .025
dtmin = .001
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason -snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_type'
petsc_options_value = 'lu superlu_dist'
l_max_its = 15
nl_max_its = 30
nl_rel_tol = 1e-12
nl_abs_tol = 1e-13
line_search = 'basic'
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
exodus = true
csv = true
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
[]
[VectorPostprocessors]
[]
(modules/contact/test/tests/pdass_problems/cylinder_friction_penalty_frictional_al_action_amg.i)
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Mesh]
[input_file]
type = FileMeshGenerator
file = cond_number.e
[]
allow_renumbering = false
[]
[Problem]
type = AugmentedLagrangianContactFEProblem
extra_tag_vectors = 'ref'
maximum_lagrangian_update_iterations = 1000
[]
[AuxVariables]
[penalty_normal_pressure]
[]
[penalty_frictional_pressure]
[]
[accumulated_slip_one]
[]
[tangential_vel_one]
[]
[normal_gap]
[]
[normal_lm]
[]
[saved_x]
[]
[saved_y]
[]
[active]
[]
[]
[Functions]
[disp_ramp_vert]
type = PiecewiseLinear
x = '0. 1. 3.5'
y = '0. -0.020 -0.020'
[]
[disp_ramp_horz]
type = PiecewiseLinear
x = '0. 1. 3.5'
y = '0. 0.0 0.015'
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
add_variables = true
save_in = 'saved_x saved_y'
extra_vector_tags = 'ref'
block = '1 2 3 4 5 6 7'
generate_output = 'stress_xx stress_yy stress_xy'
[]
[AuxKernels]
[penalty_normal_pressure]
type = MortarUserObjectAux
variable = penalty_normal_pressure
user_object = penalty_friction_object_al_friction
contact_quantity = normal_pressure
boundary = 3
[]
[penalty_frictional_pressure]
type = MortarUserObjectAux
variable = penalty_frictional_pressure
user_object = penalty_friction_object_al_friction
contact_quantity = tangential_pressure_one
boundary = 3
[]
[penalty_tangential_vel_one]
type = MortarUserObjectAux
variable = tangential_vel_one
user_object = penalty_friction_object_al_friction
contact_quantity = tangential_velocity_one
boundary = 3
[]
[penalty_accumulated_slip_one]
type = MortarUserObjectAux
variable = accumulated_slip_one
user_object = penalty_friction_object_al_friction
contact_quantity = accumulated_slip_one
boundary = 3
[]
[normal_lm]
type = MortarUserObjectAux
variable = normal_lm
user_object = penalty_friction_object_al_friction
contact_quantity = normal_lm
boundary = 3
[]
[normal_gap]
type = MortarUserObjectAux
variable = normal_gap
user_object = penalty_friction_object_al_friction
contact_quantity = normal_gap
boundary = 3
[]
[]
[Postprocessors]
[bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[]
[bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[]
[top_react_x]
type = NodalSum
variable = saved_x
boundary = 4
[]
[top_react_y]
type = NodalSum
variable = saved_y
boundary = 4
[]
[_dt]
type = TimestepSize
[]
[num_lin_it]
type = NumLinearIterations
[]
[num_nonlin_it]
type = NumNonlinearIterations
[]
[cumulative]
type = CumulativeValuePostprocessor
postprocessor = num_nonlin_it
[]
[gap]
type = SideExtremeValue
value_type = min
variable = normal_gap
boundary = 3
[]
[num_al]
type = NumAugmentedLagrangeIterations
[]
[active_set_size]
type = NodalSum
variable = active
[]
[]
[BCs]
[side_x]
type = DirichletBC
variable = disp_y
boundary = '1 2'
value = 0.0
[]
[bot_y]
type = DirichletBC
variable = disp_x
boundary = '1 2'
value = 0.0
[]
[top_y_disp]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = disp_ramp_vert
[]
[top_x_disp]
type = FunctionDirichletBC
variable = disp_x
boundary = 4
function = disp_ramp_horz
[]
[]
[Materials]
[stuff1_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e8
poissons_ratio = 0.0
[]
[stuff1_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[]
[stuff2_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2 3 4 5 6 7'
youngs_modulus = 1e6
poissons_ratio = 0.3
[]
[stuff2_stress]
type = ComputeFiniteStrainElasticStress
block = '2 3 4 5 6 7'
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options = '-ksp_snes_ew'
petsc_options_iname = '-ksp_gmres_restart -pc_type -pc_hypre_type -pc_hypre_boomeramg_max_iter'
petsc_options_value = ' 201 hypre boomeramg 8'
line_search = 'none'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-8
nl_max_its = 50
l_tol = 1e-05
l_abs_tol = 1e-13
start_time = 0.0
end_time = 0.2 # 1.0
dt = 0.1
dtmin = 0.1
[Predictor]
type = SimplePredictor
scale = 1.0
[]
automatic_scaling = true
compute_scaling_once = false
off_diagonals_in_auto_scaling = true
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[VectorPostprocessors]
[surface]
type = NodalValueSampler
use_displaced_mesh = false
variable = 'disp_x disp_y penalty_normal_pressure penalty_frictional_pressure normal_gap'
boundary = '3'
sort_by = id
[]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
exodus = true
csv = false
[vectorpp_output]
type = CSV
create_final_symlink = true
execute_on = 'INITIAL TIMESTEP_END FINAL'
[]
[]
[Contact]
[al_friction]
formulation = mortar_penalty
model = coulomb
primary = '2'
secondary = '3'
penalty = 1e7
penalty_friction = 1e+7
friction_coefficient = 0.4
al_penetration_tolerance = 1e-7
al_incremental_slip_tolerance = 1.0 # Not active
penalty_multiplier = 100
[]
[]
(modules/contact/test/tests/pdass_problems/cylinder_friction_penalty_normal_al_test_nochange.i)
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Mesh]
[input_file]
type = FileMeshGenerator
file = hertz_cyl_finer.e
[]
[secondary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 10001
new_block_name = 'secondary_lower'
sidesets = '3'
input = input_file
[]
[primary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 10000
sidesets = '2'
new_block_name = 'primary_lower'
input = secondary
[]
allow_renumbering = false
[]
[Problem]
type = AugmentedLagrangianContactFEProblem
extra_tag_vectors = 'ref'
maximum_lagrangian_update_iterations = 1000
[]
[AuxVariables]
[penalty_normal_pressure]
[]
[penalty_frictional_pressure]
[]
[accumulated_slip_one]
[]
[tangential_vel_one]
[]
[normal_gap]
[]
[normal_lm]
[]
[saved_x]
[]
[saved_y]
[]
[active]
[]
[dual_var]
use_dual = true
block = '10001'
[]
[]
[Functions]
[disp_ramp_vert]
type = PiecewiseLinear
x = '0. 1. 3.5'
y = '0. -0.020 -0.020'
[]
[disp_ramp_horz]
type = PiecewiseLinear
x = '0. 1. 3.5'
y = '0. 0.0 0.015'
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
add_variables = true
save_in = 'saved_x saved_y'
extra_vector_tags = 'ref'
block = '1 2 3 4 5 6 7'
generate_output = 'stress_xx stress_yy stress_xy'
[]
[AuxKernels]
[penalty_normal_pressure]
type = MortarUserObjectAux
variable = penalty_normal_pressure
user_object = friction_uo
contact_quantity = normal_pressure
boundary = 3
[]
[normal_lm]
type = MortarUserObjectAux
variable = normal_lm
user_object = friction_uo
contact_quantity = normal_lm
boundary = 3
[]
[normal_gap]
type = MortarUserObjectAux
variable = normal_gap
user_object = friction_uo
contact_quantity = normal_gap
boundary = 3
[]
[]
[Postprocessors]
[bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[]
[bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[]
[top_react_x]
type = NodalSum
variable = saved_x
boundary = 4
[]
[top_react_y]
type = NodalSum
variable = saved_y
boundary = 4
[]
[_dt]
type = TimestepSize
[]
[num_lin_it]
type = NumLinearIterations
[]
[num_nonlin_it]
type = NumNonlinearIterations
[]
[cumulative]
type = CumulativeValuePostprocessor
postprocessor = num_nonlin_it
[]
[gap]
type = SideExtremeValue
value_type = min
variable = normal_gap
boundary = 3
[]
[num_al]
type = NumAugmentedLagrangeIterations
[]
[active_set_size]
type = NodalSum
variable = active
[]
[]
[BCs]
[side_x]
type = DirichletBC
variable = disp_y
boundary = '1 2'
value = 0.0
[]
[bot_y]
type = DirichletBC
variable = disp_x
boundary = '1 2'
value = 0.0
[]
[top_y_disp]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = disp_ramp_vert
[]
[top_x_disp]
type = FunctionDirichletBC
variable = disp_x
boundary = 4
function = disp_ramp_horz
[]
[]
[Materials]
[stuff1_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e8
poissons_ratio = 0.0
[]
[stuff1_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[]
[stuff2_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2 3 4 5 6 7'
youngs_modulus = 1e6
poissons_ratio = 0.3
[]
[stuff2_stress]
type = ComputeFiniteStrainElasticStress
block = '2 3 4 5 6 7'
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = -pc_type
petsc_options_value = lu
line_search = 'none'
nl_abs_tol = 1e-12
nl_rel_tol = 1e-8
nl_max_its = 1300
l_tol = 1e-05
l_abs_tol = 1e-13
start_time = 0.0
end_time = 1.0 # 3.5
dt = 0.1
dtmin = 0.001
[Predictor]
type = SimplePredictor
scale = 1.0
[]
automatic_scaling = true
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[VectorPostprocessors]
[surface]
type = NodalValueSampler
use_displaced_mesh = false
variable = 'disp_x disp_y penalty_normal_pressure normal_gap'
boundary = '3'
sort_by = id
[]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
exodus = true
csv = false
[vectorpp_output]
type = CSV
create_final_symlink = true
execute_on = 'INITIAL TIMESTEP_END FINAL'
[]
[]
[UserObjects]
[friction_uo]
type = PenaltyWeightedGapUserObject
primary_boundary = '2'
secondary_boundary = '3'
primary_subdomain = '10000'
secondary_subdomain = '10001'
disp_x = disp_x
disp_y = disp_y
penalty = 1e7
penetration_tolerance = 1e-8
use_mortar_scaled_gap = true
aux_lm = dual_var
[]
[]
[Constraints]
[x]
type = NormalMortarMechanicalContact
primary_boundary = '2'
secondary_boundary = '3'
primary_subdomain = '10000'
secondary_subdomain = '10001'
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[y]
type = NormalMortarMechanicalContact
primary_boundary = '2'
secondary_boundary = '3'
primary_subdomain = '10000'
secondary_subdomain = '10001'
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[]
(modules/contact/test/tests/pdass_problems/cylinder_friction_penalty.i)
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Mesh]
[input_file]
type = FileMeshGenerator
file = hertz_cyl_coarser.e
[]
[secondary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 10001
new_block_name = 'secondary_lower'
sidesets = '3'
input = input_file
[]
[primary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 10000
sidesets = '2'
new_block_name = 'primary_lower'
input = secondary
[]
allow_renumbering = false
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[]
[AuxVariables]
[penalty_normal_pressure]
order = FIRST
family = LAGRANGE
[]
[penalty_frictional_pressure]
order = FIRST
family = LAGRANGE
[]
[accumulated_slip_one]
order = FIRST
family = LAGRANGE
[]
[tangential_vel_one]
order = FIRST
family = LAGRANGE
[]
[weighted_gap]
order = FIRST
family = LAGRANGE
[]
[stress_xx]
order = CONSTANT
family = MONOMIAL
[]
[stress_yy]
order = CONSTANT
family = MONOMIAL
[]
[stress_xy]
order = CONSTANT
family = MONOMIAL
[]
[react_x]
[]
[react_y]
[]
[]
[Functions]
[disp_ramp_vert]
type = PiecewiseLinear
x = '0. 1. 3.5'
y = '0. -0.020 -0.020'
[]
[disp_ramp_horz]
type = PiecewiseLinear
x = '0. 1. 3.5'
y = '0. 0.0 0.015'
[]
[]
[Kernels]
[TensorMechanics]
use_displaced_mesh = true
extra_vector_tags = 'ref'
block = '1 2 3 4 5 6 7'
[]
[]
[AuxKernels]
[penalty_normal_pressure_auxk]
type = MortarUserObjectAux
variable = penalty_normal_pressure
user_object = friction_uo
contact_quantity = normal_pressure
[]
[penalty_frictional_pressure_auxk]
type = MortarUserObjectAux
variable = penalty_frictional_pressure
user_object = friction_uo
contact_quantity = tangential_pressure_one
[]
[penalty_accumulated_slip_auxk]
type = MortarUserObjectAux
variable = accumulated_slip_one
user_object = friction_uo
contact_quantity = accumulated_slip_one
[]
[penalty_tangential_vel_auxk]
type = MortarUserObjectAux
variable = tangential_vel_one
user_object = friction_uo
contact_quantity = tangential_velocity_one
[]
[penalty_weighted_gap_auxk]
type = MortarUserObjectAux
variable = weighted_gap
user_object = friction_uo
contact_quantity = normal_gap
[]
[stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
block = '1 2 3 4 5 6 7'
[]
[stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
block = '1 2 3 4 5 6 7'
[]
[stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
block = '1 2 3 4 5 6 7'
[]
[react_x]
type = ReactionForceAux
vector_tag = 'ref'
v = 'disp_x'
variable = 'react_x'
[]
[react_y]
type = ReactionForceAux
vector_tag = 'ref'
v = 'disp_y'
variable = 'react_y'
[]
[]
[Postprocessors]
[bot_react_x]
type = NodalSum
variable = react_x
boundary = 1
[]
[bot_react_y]
type = NodalSum
variable = react_y
boundary = 1
[]
[top_react_x]
type = NodalSum
variable = react_x
boundary = 4
[]
[top_react_y]
type = NodalSum
variable = react_y
boundary = 4
[]
[]
[BCs]
[side_x]
type = DirichletBC
variable = disp_y
boundary = '1 2'
value = 0.0
[]
[bot_y]
type = DirichletBC
variable = disp_x
boundary = '1 2'
value = 0.0
[]
[top_y_disp]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = disp_ramp_vert
[]
[top_x_disp]
type = FunctionDirichletBC
variable = disp_x
boundary = 4
function = disp_ramp_horz
[]
[]
[Materials]
[stuff1_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e10
poissons_ratio = 0.0
[]
[stuff1_strain]
type = ComputeFiniteStrain
block = '1'
[]
[stuff1_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[]
[stuff2_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2 3 4 5 6 7'
youngs_modulus = 1e6
poissons_ratio = 0.3
[]
[stuff2_strain]
type = ComputeFiniteStrain
block = '2 3 4 5 6 7'
[]
[stuff2_stress]
type = ComputeFiniteStrainElasticStress
block = '2 3 4 5 6 7'
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_type -pc_factor_shift_type -pc_factor_shift_amount -mat_mffd_err'
petsc_options_value = 'lu superlu_dist NONZERO 1e-15 1e-5'
line_search = 'none'
nl_abs_tol = 1e-14
nl_rel_tol = 1e-10
start_time = 0.0
end_time = 0.3 # 3.5
l_tol = 1e-4
dt = 0.1
dtmin = 0.001
[Predictor]
type = SimplePredictor
scale = 1.0
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[VectorPostprocessors]
[x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '3'
sort_by = id
[]
[y_disp]
type = NodalValueSampler
variable = disp_y
boundary = '3'
sort_by = id
[]
[cont_press]
type = NodalValueSampler
variable = penalty_normal_pressure
boundary = '3'
sort_by = id
[]
[friction]
type = NodalValueSampler
variable = penalty_frictional_pressure
boundary = '3'
sort_by = id
[]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
exodus = true
csv = false
[console]
type = Console
max_rows = 5
[]
[chkfile]
type = CSV
show = 'x_disp y_disp cont_press friction'
file_base = cylinder_friction_penalty_check
create_final_symlink = true
execute_on = 'FINAL'
[]
[]
[UserObjects]
[friction_uo]
type = PenaltyFrictionUserObject
primary_boundary = '2'
secondary_boundary = '3'
primary_subdomain = '10000'
secondary_subdomain = '10001'
disp_x = disp_x
disp_y = disp_y
friction_coefficient = 0.4 # with 2.0 works
secondary_variable = disp_x
penalty = 5e9
penalty_friction = 1e7
[]
[]
[Constraints]
[x]
type = NormalMortarMechanicalContact
primary_boundary = '2'
secondary_boundary = '3'
primary_subdomain = '10000'
secondary_subdomain = '10001'
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[y]
type = NormalMortarMechanicalContact
primary_boundary = '2'
secondary_boundary = '3'
primary_subdomain = '10000'
secondary_subdomain = '10001'
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[tangential_x]
type = TangentialMortarMechanicalContact
primary_boundary = 2
secondary_boundary = 3
primary_subdomain = 10000
secondary_subdomain = 10001
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[tangential_y]
type = TangentialMortarMechanicalContact
primary_boundary = 2
secondary_boundary = 3
primary_subdomain = 10000
secondary_subdomain = 10001
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[]