- PorousFlowDictatorThe UserObject that holds the list of PorousFlow variable names
C++ Type:UserObjectName
Controllable:No
Description:The UserObject that holds the list of PorousFlow variable names
- permeabilityThe permeability tensor (usually in m^2), which is assumed constant for this material
C++ Type:libMesh::TensorValue<double>
Unit:(no unit assumed)
Controllable:No
Description:The permeability tensor (usually in m^2), which is assumed constant for this material
PorousFlowPermeabilityConst
This Material calculates the permeability tensor assuming it is constant
Input Parameters
- at_nodesFalseEvaluate Material properties at nodes instead of quadpoints
Default:False
C++ Type:bool
Controllable:No
Description:Evaluate Material properties at nodes instead of quadpoints
- blockThe list of blocks (ids or names) that this object will be applied
C++ Type:std::vector<SubdomainName>
Controllable:No
Description:The list of blocks (ids or names) that this object will be applied
- boundaryThe list of boundaries (ids or names) from the mesh where this object applies
C++ Type:std::vector<BoundaryName>
Controllable:No
Description:The list of boundaries (ids or names) from the mesh where this object applies
- computeTrueWhen false, MOOSE will not call compute methods on this material. The user must call computeProperties() after retrieving the MaterialBase via MaterialBasePropertyInterface::getMaterialBase(). Non-computed MaterialBases are not sorted for dependencies.
Default:True
C++ Type:bool
Controllable:No
Description:When false, MOOSE will not call compute methods on this material. The user must call computeProperties() after retrieving the MaterialBase via MaterialBasePropertyInterface::getMaterialBase(). Non-computed MaterialBases are not sorted for dependencies.
- constant_onNONEWhen ELEMENT, MOOSE will only call computeQpProperties() for the 0th quadrature point, and then copy that value to the other qps.When SUBDOMAIN, MOOSE will only call computeQpProperties() for the 0th quadrature point, and then copy that value to the other qps. Evaluations on element qps will be skipped
Default:NONE
C++ Type:MooseEnum
Options:NONE, ELEMENT, SUBDOMAIN
Controllable:No
Description:When ELEMENT, MOOSE will only call computeQpProperties() for the 0th quadrature point, and then copy that value to the other qps.When SUBDOMAIN, MOOSE will only call computeQpProperties() for the 0th quadrature point, and then copy that value to the other qps. Evaluations on element qps will be skipped
- declare_suffixAn optional suffix parameter that can be appended to any declared properties. The suffix will be prepended with a '_' character.
C++ Type:MaterialPropertyName
Unit:(no unit assumed)
Controllable:No
Description:An optional suffix parameter that can be appended to any declared properties. The suffix will be prepended with a '_' character.
Optional Parameters
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Controllable:Yes
Description:Set the enabled status of the MooseObject.
- implicitTrueDetermines whether this object is calculated using an implicit or explicit form
Default:True
C++ Type:bool
Controllable:No
Description:Determines whether this object is calculated using an implicit or explicit form
- search_methodnearest_node_connected_sidesChoice of search algorithm. All options begin by finding the nearest node in the primary boundary to a query point in the secondary boundary. In the default nearest_node_connected_sides algorithm, primary boundary elements are searched iff that nearest node is one of their nodes. This is fast to determine via a pregenerated node-to-elem map and is robust on conforming meshes. In the optional all_proximate_sides algorithm, primary boundary elements are searched iff they touch that nearest node, even if they are not topologically connected to it. This is more CPU-intensive but is necessary for robustness on any boundary surfaces which has disconnections (such as Flex IGA meshes) or non-conformity (such as hanging nodes in adaptively h-refined meshes).
Default:nearest_node_connected_sides
C++ Type:MooseEnum
Options:nearest_node_connected_sides, all_proximate_sides
Controllable:No
Description:Choice of search algorithm. All options begin by finding the nearest node in the primary boundary to a query point in the secondary boundary. In the default nearest_node_connected_sides algorithm, primary boundary elements are searched iff that nearest node is one of their nodes. This is fast to determine via a pregenerated node-to-elem map and is robust on conforming meshes. In the optional all_proximate_sides algorithm, primary boundary elements are searched iff they touch that nearest node, even if they are not topologically connected to it. This is more CPU-intensive but is necessary for robustness on any boundary surfaces which has disconnections (such as Flex IGA meshes) or non-conformity (such as hanging nodes in adaptively h-refined meshes).
- seed0The seed for the master random number generator
Default:0
C++ Type:unsigned int
Controllable:No
Description:The seed for the master random number generator
- use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Default:False
C++ Type:bool
Controllable:No
Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Advanced Parameters
- output_propertiesList of material properties, from this material, to output (outputs must also be defined to an output type)
C++ Type:std::vector<std::string>
Controllable:No
Description:List of material properties, from this material, to output (outputs must also be defined to an output type)
- outputsnone Vector of output names where you would like to restrict the output of variables(s) associated with this object
Default:none
C++ Type:std::vector<OutputName>
Controllable:No
Description:Vector of output names where you would like to restrict the output of variables(s) associated with this object
Outputs Parameters
- prop_getter_suffixAn optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
C++ Type:MaterialPropertyName
Unit:(no unit assumed)
Controllable:No
Description:An optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
- use_interpolated_stateFalseFor the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.
Default:False
C++ Type:bool
Controllable:No
Description:For the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.
Material Property Retrieval Parameters
Input Files
- (modules/porous_flow/test/tests/jacobian/brineco2_liquid.i)
- (modules/porous_flow/test/tests/hysteresis/except04.i)
- (modules/porous_flow/test/tests/gravity/fully_saturated_grav01c.i)
- (modules/porous_flow/examples/thm_example/2D_c.i)
- (modules/porous_flow/test/tests/actions/unsat_except2.i)
- (modules/porous_flow/test/tests/sinks/s02.i)
- (modules/porous_flow/test/tests/adaptivity/hex_adaptivity.i)
- (modules/porous_flow/test/tests/hysteresis/hys_order_07.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_steady_action.i)
- (modules/porous_flow/examples/tutorial/03.i)
- (modules/porous_flow/test/tests/flux_limited_TVD_pflow/jacobian_03.i)
- (modules/porous_flow/test/tests/recover/theis.i)
- (modules/porous_flow/test/tests/actions/block_restricted_and_not.i)
- (modules/porous_flow/test/tests/actions/basicthm_th.i)
- (modules/porous_flow/test/tests/dirackernels/pls03_action.i)
- (modules/porous_flow/examples/tidal/earth_tide_fullsat.i)
- (modules/porous_flow/test/tests/sinks/s06.i)
- (modules/porous_flow/test/tests/mass_conservation/mass11.i)
- (modules/porous_flow/test/tests/dirackernels/bh_except06.i)
- (modules/porous_flow/test/tests/energy_conservation/heat04_rz.i)
- (modules/porous_flow/test/tests/dirackernels/hfrompps.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_fv.i)
- (modules/porous_flow/test/tests/jacobian/heat_advection02.i)
- (modules/porous_flow/test/tests/dirackernels/bh_except05.i)
- (modules/porous_flow/test/tests/jacobian/basic_advection3.i)
- (modules/porous_flow/test/tests/hysteresis/2phasePP_jac.i)
- (modules/porous_flow/test/tests/jacobian/hgs01.i)
- (modules/porous_flow/examples/tutorial/08_KT.i)
- (modules/porous_flow/test/tests/gravity/fully_saturated_grav01a.i)
- (modules/porous_flow/test/tests/flux_limited_TVD_pflow/except05.i)
- (modules/porous_flow/test/tests/poro_elasticity/terzaghi_fully_saturated_volume.i)
- (modules/porous_flow/test/tests/thm_rehbinder/fixed_outer.i)
- (modules/porous_flow/test/tests/hysteresis/except05.i)
- (modules/porous_flow/test/tests/jacobian/disp01.i)
- (modules/combined/examples/geochem-porous_flow/forge/porous_flow.i)
- (modules/porous_flow/test/tests/heat_advection/except1.i)
- (modules/porous_flow/test/tests/gravity/fully_saturated_upwinded_grav01c.i)
- (modules/porous_flow/test/tests/jacobian/heat_advection01.i)
- (modules/porous_flow/test/tests/dirackernels/theis2.i)
- (modules/porous_flow/test/tests/aux_kernels/darcy_velocity_lower_except.i)
- (modules/porous_flow/test/tests/fluidstate/brineco2_hightemp.i)
- (modules/porous_flow/test/tests/actions/block_restricted_materials.i)
- (modules/porous_flow/test/tests/jacobian/fflux15.i)
- (modules/porous_flow/examples/coal_mining/coarse_with_fluid.i)
- (modules/porous_flow/test/tests/dirackernels/injection_with_plasticity.i)
- (modules/porous_flow/test/tests/jacobian/brineco2_twophase.i)
- (modules/porous_flow/test/tests/jacobian/fflux02.i)
- (modules/porous_flow/test/tests/jacobian/disp03.i)
- (modules/porous_flow/test/tests/dispersion/disp01.i)
- (modules/porous_flow/test/tests/jacobian/fflux05.i)
- (modules/porous_flow/test/tests/fluidstate/coldwater_injection.i)
- (modules/porous_flow/examples/solute_tracer_transport/solute_tracer_transport_2D.i)
- (modules/porous_flow/test/tests/hysteresis/hys_order_03.i)
- (modules/porous_flow/test/tests/gravity/grav01c_action.i)
- (modules/porous_flow/test/tests/fluidstate/theis.i)
- (modules/porous_flow/examples/lava_lamp/1phase_convection.i)
- (modules/porous_flow/test/tests/jacobian/line_sink03.i)
- (modules/porous_flow/test/tests/sinks/s01.i)
- (modules/porous_flow/examples/thm_example/2D.i)
- (modules/porous_flow/examples/tutorial/01.i)
- (modules/porous_flow/test/tests/jacobian/basic_advection2.i)
- (modules/porous_flow/test/tests/jacobian/outflowbc01.i)
- (modules/porous_flow/test/tests/flux_limited_TVD_pflow/pffltvd_3D.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phasePS_fv.i)
- (modules/porous_flow/examples/natural_convection/natural_convection.i)
- (modules/porous_flow/test/tests/dirackernels/theis1.i)
- (modules/porous_flow/test/tests/newton_cooling/nc06.i)
- (modules/porous_flow/examples/multiapp_fracture_flow/single_fracture_heat_transfer/fracture_app.i)
- (modules/porous_flow/test/tests/flux_limited_TVD_pflow/jacobian_02.i)
- (modules/porous_flow/test/tests/jacobian/hcs01.i)
- (modules/porous_flow/test/tests/hysteresis/hys_order_05.i)
- (modules/porous_flow/test/tests/hysteresis/hys_order_02.i)
- (modules/porous_flow/test/tests/numerical_diffusion/fully_saturated_action.i)
- (modules/porous_flow/test/tests/poro_elasticity/pp_generation_unconfined_constM.i)
- (modules/porous_flow/test/tests/newton_cooling/nc01.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phasePSVG.i)
- (modules/porous_flow/test/tests/hysteresis/except03.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phase_fv.i)
- (modules/porous_flow/test/tests/fluidstate/brineco2_nonisothermal.i)
- (modules/porous_flow/test/tests/infiltration_and_drainage/rsc02.i)
- (modules/porous_flow/test/tests/jacobian/pls03.i)
- (modules/porous_flow/test/tests/sinks/outflow_except1.i)
- (modules/porous_flow/test/tests/dispersion/disp01_fv.i)
- (modules/porous_flow/examples/tutorial/13.i)
- (modules/porous_flow/test/tests/fluidstate/waterncg.i)
- (modules/porous_flow/test/tests/adaptivity/quad_adaptivity.i)
- (modules/porous_flow/test/tests/heat_advection/heat_advection_1d.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_fully_saturated_fv.i)
- (modules/porous_flow/test/tests/dirackernels/bh07.i)
- (modules/porous_flow/test/tests/gravity/fully_saturated_grav01b.i)
- (modules/porous_flow/test/tests/buckley_leverett/bl01.i)
- (modules/porous_flow/test/tests/flux_limited_TVD_pflow/jacobian_04.i)
- (modules/porous_flow/test/tests/hysteresis/hys_order_04.i)
- (modules/porous_flow/test/tests/actions/fullsat_brine_except5.i)
- (modules/porous_flow/test/tests/jacobian/fflux11.i)
- (modules/porous_flow/test/tests/dirackernels/pls02reporter.i)
- (modules/porous_flow/examples/multiapp_fracture_flow/3dFracture/matrix_app.i)
- (modules/porous_flow/test/tests/actions/basicthm_borehole.i)
- (modules/porous_flow/test/tests/actions/fullsat_borehole.i)
- (modules/porous_flow/test/tests/gravity/grav02f.i)
- (modules/porous_flow/test/tests/flux_limited_TVD_pflow/jacobian_05.i)
- (modules/porous_flow/test/tests/sinks/s04.i)
- (modules/porous_flow/test/tests/hysteresis/except07.i)
- (modules/porous_flow/test/tests/hysteresis/except09.i)
- (modules/porous_flow/test/tests/newton_cooling/nc02.i)
- (modules/porous_flow/test/tests/numerical_diffusion/no_action.i)
- (modules/porous_flow/test/tests/jacobian/fflux06.i)
- (modules/porous_flow/test/tests/sinks/s07.i)
- (modules/porous_flow/test/tests/jacobian/fflux03.i)
- (modules/porous_flow/test/tests/dirackernels/bh_except02.i)
- (modules/porous_flow/test/tests/hysteresis/relperm_jac_1.i)
- (modules/porous_flow/test/tests/numerical_diffusion/pffltvd.i)
- (modules/porous_flow/test/tests/gravity/grav02a.i)
- (modules/porous_flow/test/tests/sinks/s15.i)
- (modules/porous_flow/test/tests/sinks/injection_production_eg_outflowBC.i)
- (modules/porous_flow/test/tests/basic_advection/except2.i)
- (modules/porous_flow/test/tests/jacobian/diff02.i)
- (modules/porous_flow/test/tests/mass_conservation/mass04.i)
- (modules/porous_flow/test/tests/adaptivity/tri3_adaptivity.i)
- (modules/porous_flow/test/tests/gravity/grav01a_fv.i)
- (modules/porous_flow/test/tests/actions/fullsat_brine_except3.i)
- (modules/porous_flow/test/tests/chemistry/2species_equilibrium.i)
- (modules/porous_flow/test/tests/jacobian/heat_advection01_fullsat_upwind.i)
- (modules/porous_flow/test/tests/gravity/grav01d.i)
- (modules/porous_flow/test/tests/jacobian/fflux13.i)
- (modules/porous_flow/test/tests/sinks/injection_production_eg.i)
- (modules/porous_flow/test/tests/gravity/fully_saturated_upwinded_grav01c_action.i)
- (modules/porous_flow/test/tests/gravity/grav01a.i)
- (modules/porous_flow/test/tests/gravity/grav02b.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2comp_nodens.i)
- (modules/porous_flow/test/tests/actions/basicthm_h.i)
- (modules/porous_flow/test/tests/dirackernels/injection_production.i)
- (modules/porous_flow/test/tests/jacobian/waterncg_twophase.i)
- (modules/porous_flow/examples/flow_through_fractured_media/coarse_3D.i)
- (modules/porous_flow/test/tests/jacobian/waterncg_twophase_nonisothermal.i)
- (modules/porous_flow/test/tests/fluidstate/theis_nonisothermal.i)
- (modules/porous_flow/test/tests/poro_elasticity/mandel_fully_saturated.i)
- (modules/porous_flow/test/tests/actions/basicthm_hm.i)
- (modules/porous_flow/test/tests/poro_elasticity/mandel_basicthm.i)
- (modules/porous_flow/examples/tidal/barometric_fully_confined.i)
- (modules/porous_flow/test/tests/heat_advection/heat_advection_1d_fully_saturated_action.i)
- (modules/porous_flow/test/tests/dirackernels/theis_rz.i)
- (modules/porous_flow/examples/co2_intercomparison/1Dradial/1Dradial.i)
- (modules/porous_flow/examples/groundwater/ex02_steady_state.i)
- (modules/porous_flow/test/tests/gravity/grav01c.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phase_monomial.i)
- (modules/porous_flow/test/tests/jacobian/brineco2_twophase_nonisothermal.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_steady.i)
- (modules/porous_flow/test/tests/actions/unsat_except1.i)
- (modules/porous_flow/examples/flow_through_fractured_media/fine_thick_fracture_steady.i)
- (modules/porous_flow/test/tests/sinks/s13.i)
- (modules/porous_flow/test/tests/dirackernels/theis3.i)
- (modules/porous_flow/test/tests/gravity/fully_saturated_upwinded_nodens_grav01c_action.i)
- (modules/porous_flow/test/tests/dispersion/diff01_action.i)
- (modules/porous_flow/test/tests/poro_elasticity/mandel_constM.i)
- (modules/porous_flow/test/tests/jacobian/fflux10.i)
- (modules/porous_flow/test/tests/multi_system/flow_and_mecha.i)
- (modules/porous_flow/test/tests/chemistry/2species_equilibrium_2phase.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_adaptivity.i)
- (modules/porous_flow/test/tests/gravity/grav02g.i)
- (modules/porous_flow/test/tests/jacobian/outflowbc03.i)
- (modules/porous_flow/test/tests/dirackernels/bh_except01.i)
- (modules/porous_flow/test/tests/jacobian/basic_advection1.i)
- (modules/porous_flow/test/tests/fluidstate/water_vapor_phasechange.i)
- (modules/porous_flow/test/tests/energy_conservation/heat04_action_KT.i)
- (modules/porous_flow/test/tests/aux_kernels/darcy_velocity_lower_2D.i)
- (modules/porous_flow/test/tests/basic_advection/except1.i)
- (modules/porous_flow/examples/tutorial/06.i)
- (modules/porous_flow/test/tests/adaptivity/tet4_adaptivity.i)
- (modules/porous_flow/test/tests/jacobian/pls01.i)
- (modules/porous_flow/test/tests/hysteresis/hys_order_06.i)
- (modules/porous_flow/test/tests/actions/fullsat_brine.i)
- (modules/porous_flow/test/tests/hysteresis/2phasePS_jac.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_3comp.i)
- (modules/porous_flow/test/tests/infiltration_and_drainage/wli02.i)
- (modules/porous_flow/examples/tidal/atm_tides_open_hole.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phasePS_KT.i)
- (modules/porous_flow/test/tests/dirackernels/bh03.i)
- (modules/porous_flow/test/tests/chemistry/2species_predis.i)
- (modules/porous_flow/test/tests/jacobian/fflux02_fully_saturated.i)
- (modules/porous_flow/test/tests/gravity/grav02e.i)
- (modules/porous_flow/test/tests/jacobian/fflux07.i)
- (modules/porous_flow/test/tests/dirackernels/bh04.i)
- (modules/porous_flow/test/tests/actions/fullsat_brine_except2.i)
- (modules/porous_flow/test/tests/energy_conservation/heat04_fullysat_action.i)
- (modules/porous_flow/test/tests/dirackernels/bh_except04.i)
- (modules/porous_flow/test/tests/sinks/s09.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_MD.i)
- (modules/porous_flow/test/tests/flux_limited_TVD_pflow/pffltvd_2D.i)
- (modules/porous_flow/test/tests/dirackernels/bh_except12.i)
- (modules/porous_flow/test/tests/dirackernels/bh02.i)
- (modules/porous_flow/test/tests/dirackernels/bh_except03.i)
- (modules/porous_flow/test/tests/jacobian/basic_advection4.i)
- (modules/porous_flow/test/tests/flux_limited_TVD_pflow/except03.i)
- (modules/porous_flow/test/tests/jacobian/fv_mass_flux.i)
- (modules/porous_flow/test/tests/hysteresis/relperm_jac.i)
- (modules/porous_flow/examples/coal_mining/fine_with_fluid.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d.i)
- (modules/porous_flow/test/tests/infiltration_and_drainage/bw02.i)
- (modules/porous_flow/test/tests/jacobian/fflux01.i)
- (modules/porous_flow/test/tests/heat_advection/heat_advection_1d_fv.i)
- (modules/porous_flow/test/tests/heat_advection/heat_advection_1d_fullsat.i)
- (modules/porous_flow/test/tests/dirackernels/bh05.i)
- (modules/porous_flow/test/tests/thm_rehbinder/free_outer.i)
- (modules/porous_flow/test/tests/dirackernels/pls02.i)
- (modules/porous_flow/test/tests/energy_conservation/heat03_rz.i)
- (modules/porous_flow/test/tests/hysteresis/hys_order_01.i)
- (modules/porous_flow/test/tests/gravity/grav02b_fv.i)
- (modules/combined/examples/geochem-porous_flow/geotes_2D/porous_flow.i)
- (modules/porous_flow/test/tests/dirackernels/bh_except16.i)
- (modules/porous_flow/examples/ates/ates.i)
- (modules/porous_flow/test/tests/aux_kernels/darcy_velocity_fv.i)
- (modules/porous_flow/examples/tutorial/08.i)
- (modules/porous_flow/test/tests/hysteresis/except08.i)
- (modules/porous_flow/test/tests/basic_advection/2phase.i)
- (modules/porous_flow/test/tests/sinks/s08.i)
- (modules/porous_flow/test/tests/actions/multiblock.i)
- (modules/porous_flow/test/tests/dirackernels/bh_except14.i)
- (modules/porous_flow/examples/groundwater/ex02_abstraction.i)
- (modules/porous_flow/test/tests/fluids/simple_fluid_yr_MPa_C_action.i)
- (modules/porous_flow/test/tests/sinks/s05.i)
- (modules/porous_flow/test/tests/infiltration_and_drainage/rd02.i)
- (modules/porous_flow/examples/restart/gas_injection.i)
- (modules/porous_flow/test/tests/jacobian/linear_por.i)
- (modules/porous_flow/test/tests/sinks/outflow_except2.i)
- (modules/porous_flow/test/tests/jacobian/fflux04.i)
- (modules/porous_flow/test/tests/poro_elasticity/mandel_fully_saturated_volume.i)
- (modules/porous_flow/test/tests/poro_elasticity/pp_generation_action.i)
- (modules/porous_flow/examples/tutorial/05_tabulated.i)
- (modules/porous_flow/test/tests/hysteresis/hys_order_08.i)
- (modules/porous_flow/test/tests/energy_conservation/heat04_action.i)
- (modules/porous_flow/test/tests/jacobian/diff01.i)
- (modules/porous_flow/test/tests/dirackernels/bh_except07.i)
- (modules/porous_flow/examples/tidal/atm_tides.i)
- (modules/porous_flow/test/tests/jacobian/pls02.i)
- (modules/porous_flow/test/tests/gravity/grav01b.i)
- (modules/porous_flow/test/tests/fluidstate/theis_tabulated.i)
- (modules/porous_flow/test/tests/poro_elasticity/terzaghi_constM.i)
- (modules/porous_flow/test/tests/aux_kernels/darcy_velocity.i)
- (modules/porous_flow/test/tests/jacobian/pls04.i)
- (modules/porous_flow/test/tests/jacobian/fflux14.i)
- (modules/porous_flow/test/tests/dispersion/disp01_heavy.i)
- (modules/porous_flow/test/tests/jacobian/outflowbc04.i)
- (modules/porous_flow/test/tests/jacobian/line_sink04.i)
- (modules/porous_flow/test/tests/jacobian/disp04.i)
- (modules/porous_flow/test/tests/aux_kernels/darcy_velocity_lower.i)
- (modules/porous_flow/test/tests/gravity/grav02e_fv.i)
- (modules/porous_flow/test/tests/fluidstate/waterncg_nonisothermal.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_3comp_action.i)
- (modules/porous_flow/test/tests/dirackernels/bh_except08.i)
- (modules/porous_flow/test/tests/actions/block_restricted.i)
- (modules/porous_flow/examples/restart/gas_injection_new_mesh.i)
- (modules/porous_flow/test/tests/sinks/s03.i)
- (modules/porous_flow/test/tests/recover/pffltvd.i)
- (modules/porous_flow/test/tests/infiltration_and_drainage/wli01.i)
- (modules/porous_flow/examples/restart/gravityeq.i)
- (modules/porous_flow/test/tests/jacobian/brineco2_liquid_2.i)
- (modules/porous_flow/examples/lava_lamp/2phase_convection.i)
- (modules/porous_flow/test/tests/jacobian/outflowbc02.i)
- (modules/porous_flow/test/tests/flux_limited_TVD_pflow/except01.i)
- (modules/porous_flow/test/tests/gravity/grav02c.i)
- (modules/porous_flow/test/tests/jacobian/line_sink01.i)
- (modules/porous_flow/test/tests/jacobian/diff03.i)
- (modules/porous_flow/test/tests/actions/basicthm_thm.i)
- (modules/porous_flow/test/tests/flux_limited_TVD_pflow/pffltvd_1D.i)
- (modules/porous_flow/test/tests/poro_elasticity/terzaghi.i)
- (modules/porous_flow/test/tests/aux_kernels/properties.i)
- (modules/porous_flow/test/tests/infiltration_and_drainage/rsc01.i)
- (modules/porous_flow/test/tests/fluidstate/waterncg_ic.i)
- (modules/porous_flow/test/tests/mass_conservation/mass13.i)
- (modules/porous_flow/examples/tutorial/06_KT.i)
- (modules/porous_flow/test/tests/basic_advection/1phase.i)
- (modules/porous_flow/test/tests/flux_limited_TVD_pflow/jacobian_01.i)
- (modules/porous_flow/examples/tutorial/05.i)
- (modules/porous_flow/test/tests/hysteresis/except01.i)
- (modules/porous_flow/test/tests/gravity/grav02d.i)
- (modules/porous_flow/test/tests/hysteresis/except06.i)
- (modules/porous_flow/test/tests/dispersion/diff01.i)
- (modules/porous_flow/test/tests/fluidstate/brineco2_fv.i)
- (modules/porous_flow/examples/tutorial/10.i)
- (modules/porous_flow/test/tests/mass_conservation/mass12.i)
- (modules/porous_flow/test/tests/jacobian/waterncg_liquid.i)
- (modules/porous_flow/test/tests/heat_advection/heat_advection_1d_KT.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_3comp_fully_saturated.i)
- (modules/porous_flow/examples/groundwater/ex01.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_fully_saturated.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phase.i)
- (modules/porous_flow/examples/tutorial/04.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phasePS.i)
- (modules/porous_flow/test/tests/flux_limited_TVD_pflow/except02.i)
- (modules/porous_flow/test/tests/poro_elasticity/pp_generation_unconfined_constM_action.i)
- (modules/porous_flow/test/tests/jacobian/heat_advection01_fully_saturated.i)
- (modules/porous_flow/examples/flow_through_fractured_media/fine_thick_fracture_transient.i)
- (modules/porous_flow/test/tests/jacobian/line_sink02.i)
- (modules/porous_flow/examples/flow_through_fractured_media/fine_transient.i)
- (modules/porous_flow/test/tests/fluidstate/brineco2_ic.i)
- (modules/porous_flow/test/tests/newton_cooling/nc08.i)
- (modules/porous_flow/test/tests/poro_elasticity/pp_generation_unconfined_basicthm.i)
- (modules/porous_flow/test/tests/thm_rehbinder/fixed_outer_rz.i)
- (modules/porous_flow/test/tests/hysteresis/except02.i)
- (modules/porous_flow/test/tests/desorption/desorption02.i)
- (modules/porous_flow/test/tests/poro_elasticity/pp_generation_unconfined.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phasePSVG2.i)
- (modules/porous_flow/test/tests/jacobian/brineco2_gas.i)
- (modules/porous_flow/test/tests/jacobian/fflux12.i)
- (modules/porous_flow/test/tests/poro_elasticity/terzaghi_basicthm.i)
- (modules/porous_flow/examples/flow_through_fractured_media/coarse.i)
- (modules/porous_flow/test/tests/jacobian/disp02.i)
- (modules/porous_flow/test/tests/heat_advection/heat_advection_1d_fully_saturated.i)
- (modules/combined/examples/geochem-porous_flow/geotes_weber_tensleep/porous_flow.i)
- (modules/porous_flow/test/tests/hysteresis/hys_order_09.i)
- (modules/porous_flow/test/tests/poro_elasticity/mandel.i)
- (modules/porous_flow/test/tests/actions/fullsat_brine_except1.i)
- (modules/porous_flow/test/tests/fluidstate/coldwater_injection_radial.i)
- (modules/porous_flow/examples/solute_tracer_transport/solute_tracer_transport.i)
- (modules/porous_flow/test/tests/dirackernels/bh_except13.i)
- (modules/porous_flow/test/tests/fluidstate/theis_brineco2_nonisothermal.i)
- (modules/porous_flow/examples/flow_through_fractured_media/fine_steady.i)
- (modules/porous_flow/test/tests/flux_limited_TVD_pflow/pffltvd_2D_angle.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_fully_saturated_2.i)
- (modules/porous_flow/test/tests/actions/fullsat_brine_except4.i)
- (modules/porous_flow/test/tests/jacobian/fflux01_fully_saturated.i)
- (modules/porous_flow/test/tests/sinks/s14.i)
- (modules/porous_flow/test/tests/jacobian/waterncg_gas.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2comp.i)
- (modules/porous_flow/test/tests/flux_limited_TVD_pflow/pffltvd_2D_trimesh.i)
- (modules/porous_flow/test/tests/infiltration_and_drainage/bw01.i)
- (modules/porous_flow/test/tests/fluidstate/water_vapor.i)
- (modules/porous_flow/test/tests/actions/addmaterials.i)
- (modules/porous_flow/test/tests/actions/addmaterials2.i)
- (modules/porous_flow/test/tests/infiltration_and_drainage/rd03.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_action.i)
- (modules/porous_flow/test/tests/dispersion/diff01_fv.i)
- (modules/porous_flow/test/tests/fluidstate/theis_brineco2.i)
- (modules/porous_flow/test/tests/poro_elasticity/pp_generation_fullysat_action.i)
- (modules/porous_flow/test/tests/poro_elasticity/pp_generation.i)
- (modules/porous_flow/test/tests/fluidstate/water_vapor_tab.i)
- (modules/porous_flow/test/tests/dirackernels/bh02reporter.i)
- (modules/porous_flow/test/tests/jacobian/fflux09.i)
- (modules/porous_flow/test/tests/infiltration_and_drainage/rd01.i)
- (modules/porous_flow/test/tests/actions/fullsat_brine_except6.i)
- (modules/porous_flow/test/tests/flux_limited_TVD_pflow/pffltvd_1D_adaptivity.i)
- (modules/porous_flow/test/tests/sinks/s09_fully_saturated.i)
- (modules/porous_flow/test/tests/sinks/PorousFlowPiecewiseLinearSink_BC_eg1.i)
- (modules/porous_flow/test/tests/fluidstate/brineco2_2.i)
- (modules/porous_flow/test/tests/energy_conservation/heat03.i)
- (modules/porous_flow/test/tests/numerical_diffusion/pffltvd_action.i)
- (modules/porous_flow/test/tests/flux_limited_TVD_pflow/except04.i)
(modules/porous_flow/test/tests/jacobian/brineco2_liquid.i)
# Tests correct calculation of properties derivatives in PorousFlowFluidState
# for conditions that give a single liquid phase
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[AuxVariables]
[xnacl]
initial_condition = 0.05
[]
[]
[Variables]
[pgas]
[]
[zi]
[]
[]
[ICs]
[pgas]
type = RandomIC
min = 5e6
max = 8e6
variable = pgas
[]
[z_liquid]
type = RandomIC
min = 0.01
max = 0.03
variable = zi
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pgas
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = zi
fluid_component = 1
[]
[adv0]
type = PorousFlowAdvectiveFlux
variable = pgas
fluid_component = 0
[]
[adv1]
type = PorousFlowAdvectiveFlux
variable = zi
fluid_component = 1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas zi'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
pc_max = 1e4
[]
[fs]
type = PorousFlowBrineCO2
brine_fp = brine
co2_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[brine]
type = BrineFluidProperties
[]
[water]
type = Water97FluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 50
[]
[brineco2]
type = PorousFlowFluidState
gas_porepressure = pgas
z = zi
temperature_unit = Celsius
xnacl = xnacl
capillary_pressure = pc
fluid_state = fs
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[AuxVariables]
[sgas]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[sgas]
type = PorousFlowPropertyAux
property = saturation
phase = 1
variable = sgas
[]
[]
[Postprocessors]
[sgas_min]
type = ElementExtremeValue
variable = sgas
value_type = min
[]
[sgas_max]
type = ElementExtremeValue
variable = sgas
value_type = max
[]
[]
(modules/porous_flow/test/tests/hysteresis/except04.i)
# Exception testing of PorousFlowHysteresisOrder
# Incorrect: previous_turning_points not in the range [0, 1]
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[]
[PorousFlowBasicTHM]
porepressure = pp
fp = simple_fluid
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[biot_modulus]
type = PorousFlowConstantBiotModulus
biot_coefficient = 0.8
solid_bulk_compliance = 2e-7
fluid_bulk_modulus = 1e7
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-13 0 0 0 1e-13 0 0 0 1e-13'
[]
[hys_order]
type = PorousFlowHysteresisOrder
initial_order = 1
previous_turning_points = -0.1
[]
[]
[Preconditioning]
[basic]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
(modules/porous_flow/test/tests/gravity/fully_saturated_grav01c.i)
# Checking that gravity head is established
# 1phase, 2-component, constant fluid-bulk, constant viscosity, constant permeability
# fully saturated with fully-saturated Kernel
# For better agreement with the analytical solution (ana_pp), just increase nx
# NOTE: the numerics described by this input file is quite delicate. Firstly, the steady-state solution does not depend on the mass-fraction distribution, so the mass-fraction variable can assume any values (with the constraint that its integral is the same as the initial condition). Secondly, because the PorousFlowFullySaturatedDarcyFlow does no upwinding, the steady-state porepressure distribution can contain non-physical oscillations. The solver choice and mesh choice used below mean the result is as expected, but changing these can produce different results.
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
xmin = -1
xmax = 0
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[InitialCondition]
type = RandomIC
min = 0
max = 1
[]
[]
[frac]
[InitialCondition]
type = RandomIC
min = 0
max = 1
[]
[]
[]
[Kernels]
[flux1]
type = PorousFlowFullySaturatedDarcyFlow
variable = pp
fluid_component = 0
gravity = '-1 0 0'
[]
[flux0]
type = PorousFlowFullySaturatedDarcyFlow
variable = frac
fluid_component = 1
gravity = '-1 0 0'
[]
[]
[Functions]
[ana_pp]
type = ParsedFunction
symbol_names = 'g B p0 rho0'
symbol_values = '1 1.2 0 1'
expression = '-B*log(exp(-p0/B)+g*rho0*x/B)' # expected pp at base
[]
[]
[BCs]
[z]
type = DirichletBC
variable = pp
boundary = right
value = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp frac'
number_fluid_phases = 1
number_fluid_components = 2
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.2
density0 = 1
viscosity = 1
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseFullySaturated
porepressure = pp
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = frac
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[]
[Postprocessors]
[pp_base]
type = PointValue
variable = pp
point = '-1 0 0'
[]
[pp_analytical]
type = FunctionValuePostprocessor
function = ana_pp
point = '-1 0 0'
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Steady
solve_type = Newton
nl_rel_tol = 1E-12
petsc_options_iname = '-pc_factor_shift_type -snes_linesearch_type'
petsc_options_value = 'NONZERO basic'
[]
[Outputs]
execute_on = 'timestep_end'
file_base = fully_saturated_grav01c
[csv]
type = CSV
[]
[]
(modules/porous_flow/examples/thm_example/2D_c.i)
# Two phase, temperature-dependent, with mechanics and chemistry, radial with fine mesh, constant injection of cold co2 into a overburden-reservoir-underburden containing mostly water
# species=0 is water
# species=1 is co2
# phase=0 is liquid, and since massfrac_ph0_sp0 = 1, this is all water
# phase=1 is gas, and since massfrac_ph1_sp0 = 0, this is all co2
#
# The mesh used below has very high resolution, so the simulation takes a long time to complete.
# Some suggested meshes of different resolution:
# nx=50, bias_x=1.2
# nx=100, bias_x=1.1
# nx=200, bias_x=1.05
# nx=400, bias_x=1.02
# nx=1000, bias_x=1.01
# nx=2000, bias_x=1.003
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2000
bias_x = 1.003
xmin = 0.1
xmax = 5000
ny = 1
ymin = 0
ymax = 11
coord_type = RZ
[]
[GlobalParams]
displacements = 'disp_r disp_z'
PorousFlowDictator = dictator
gravity = '0 0 0'
biot_coefficient = 1.0
[]
[Variables]
[pwater]
initial_condition = 18.3e6
[]
[sgas]
initial_condition = 0.0
[]
[temp]
initial_condition = 358
[]
[disp_r]
[]
[]
[AuxVariables]
[rate]
[]
[disp_z]
[]
[massfrac_ph0_sp0]
initial_condition = 1 # all H20 in phase=0
[]
[massfrac_ph1_sp0]
initial_condition = 0 # no H2O in phase=1
[]
[pgas]
family = MONOMIAL
order = FIRST
[]
[swater]
family = MONOMIAL
order = FIRST
[]
[stress_rr]
order = CONSTANT
family = MONOMIAL
[]
[stress_tt]
order = CONSTANT
family = MONOMIAL
[]
[stress_zz]
order = CONSTANT
family = MONOMIAL
[]
[mineral_conc_m3_per_m3]
family = MONOMIAL
order = CONSTANT
initial_condition = 0.1
[]
[eqm_const]
initial_condition = 0.0
[]
[porosity]
family = MONOMIAL
order = CONSTANT
[]
[]
[Kernels]
[mass_water_dot]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pwater
[]
[flux_water]
type = PorousFlowAdvectiveFlux
fluid_component = 0
use_displaced_mesh = false
variable = pwater
[]
[mass_co2_dot]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[flux_co2]
type = PorousFlowAdvectiveFlux
fluid_component = 1
use_displaced_mesh = false
variable = sgas
[]
[energy_dot]
type = PorousFlowEnergyTimeDerivative
variable = temp
[]
[advection]
type = PorousFlowHeatAdvection
use_displaced_mesh = false
variable = temp
[]
[conduction]
type = PorousFlowExponentialDecay
use_displaced_mesh = false
variable = temp
reference = 358
rate = rate
[]
[grad_stress_r]
type = StressDivergenceRZTensors
temperature = temp
eigenstrain_names = thermal_contribution
variable = disp_r
use_displaced_mesh = false
component = 0
[]
[poro_r]
type = PorousFlowEffectiveStressCoupling
variable = disp_r
use_displaced_mesh = false
component = 0
[]
[]
[AuxKernels]
[rate]
type = FunctionAux
variable = rate
execute_on = timestep_begin
function = decay_rate
[]
[pgas]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = pgas
[]
[swater]
type = PorousFlowPropertyAux
property = saturation
phase = 0
variable = swater
[]
[stress_rr]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_rr
index_i = 0
index_j = 0
[]
[stress_tt]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_tt
index_i = 2
index_j = 2
[]
[stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 1
index_j = 1
[]
[mineral]
type = PorousFlowPropertyAux
property = mineral_concentration
mineral_species = 0
variable = mineral_conc_m3_per_m3
[]
[eqm_const_auxk]
type = ParsedAux
variable = eqm_const
coupled_variables = temp
expression = '(358 - temp) / (358 - 294)'
[]
[porosity_auxk]
type = PorousFlowPropertyAux
property = porosity
variable = porosity
[]
[]
[Functions]
[decay_rate]
# Eqn(26) of the first paper of LaForce et al.
# Ka * (rho C)_a = 10056886.914
# h = 11
type = ParsedFunction
expression = 'sqrt(10056886.914/t)/11.0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp pwater sgas disp_r'
number_fluid_phases = 2
number_fluid_components = 2
number_aqueous_kinetic = 1
aqueous_phase_number = 1
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[]
[FluidProperties]
[water]
type = SimpleFluidProperties
bulk_modulus = 2.27e14
density0 = 970.0
viscosity = 0.3394e-3
cv = 4149.0
cp = 4149.0
porepressure_coefficient = 0.0
thermal_expansion = 0
[]
[co2]
type = SimpleFluidProperties
bulk_modulus = 2.27e14
density0 = 516.48
viscosity = 0.0393e-3
cv = 2920.5
cp = 2920.5
porepressure_coefficient = 0.0
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = pwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[water]
type = PorousFlowSingleComponentFluid
fp = water
phase = 0
[]
[gas]
type = PorousFlowSingleComponentFluid
fp = co2
phase = 1
[]
[porosity_reservoir]
type = PorousFlowPorosity
porosity_zero = 0.2
chemical = true
reference_chemistry = 0.1
initial_mineral_concentrations = 0.1
[]
[permeability_reservoir]
type = PorousFlowPermeabilityConst
permeability = '2e-12 0 0 0 0 0 0 0 0'
[]
[relperm_liquid]
type = PorousFlowRelativePermeabilityCorey
n = 4
phase = 0
s_res = 0.200
sum_s_res = 0.405
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityBC
phase = 1
s_res = 0.205
sum_s_res = 0.405
nw_phase = true
lambda = 2
[]
[thermal_conductivity_reservoir]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '0 0 0 0 1.320 0 0 0 0'
wet_thermal_conductivity = '0 0 0 0 3.083 0 0 0 0'
[]
[internal_energy_reservoir]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1100
density = 2350.0
[]
[elasticity_tensor]
type = ComputeIsotropicElasticityTensor
shear_modulus = 6.0E9
poissons_ratio = 0.2
[]
[strain]
type = ComputeAxisymmetricRZSmallStrain
eigenstrain_names = 'thermal_contribution ini_stress'
[]
[ini_strain]
type = ComputeEigenstrainFromInitialStress
initial_stress = '-12.8E6 0 0 0 -51.3E6 0 0 0 -12.8E6'
eigenstrain_name = ini_stress
[]
[thermal_contribution]
type = ComputeThermalExpansionEigenstrain
temperature = temp
stress_free_temperature = 358
thermal_expansion_coeff = 5E-6
eigenstrain_name = thermal_contribution
[]
[stress]
type = ComputeLinearElasticStress
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[predis]
type = PorousFlowAqueousPreDisChemistry
num_reactions = 1
primary_concentrations = 1.0 # fixed activity
equilibrium_constants_as_log10 = true
equilibrium_constants = eqm_const
primary_activity_coefficients = 1.0 # fixed activity
reactions = 1
kinetic_rate_constant = 1E-6
molar_volume = 1.0
specific_reactive_surface_area = 1.0
activation_energy = 0.0 # no Arrhenius
[]
[mineral_conc]
type = PorousFlowAqueousPreDisMineral
initial_concentrations = 0.1
[]
[predis_nodes]
type = PorousFlowAqueousPreDisChemistry
at_nodes = true
num_reactions = 1
primary_concentrations = 1.0 # fixed activity
equilibrium_constants_as_log10 = true
equilibrium_constants = eqm_const
primary_activity_coefficients = 1.0 # fixed activity
reactions = 1
kinetic_rate_constant = 1E-6
molar_volume = 1.0
specific_reactive_surface_area = 1.0
activation_energy = 0.0 # no Arrhenius
[]
[mineral_conc_nodes]
type = PorousFlowAqueousPreDisMineral
at_nodes = true
initial_concentrations = 0.1
[]
[]
[BCs]
[outer_pressure_fixed]
type = DirichletBC
boundary = right
value = 18.3e6
variable = pwater
[]
[outer_saturation_fixed]
type = DirichletBC
boundary = right
value = 0.0
variable = sgas
[]
[outer_temp_fixed]
type = DirichletBC
boundary = right
value = 358
variable = temp
[]
[fixed_outer_r]
type = DirichletBC
variable = disp_r
value = 0
boundary = right
[]
[co2_injection]
type = PorousFlowSink
boundary = left
variable = sgas
use_mobility = false
use_relperm = false
fluid_phase = 1
flux_function = 'min(t/100.0,1)*(-2.294001475)' # 5.0E5 T/year = 15.855 kg/s, over area of 2Pi*0.1*11
[]
[cold_co2]
type = DirichletBC
boundary = left
variable = temp
value = 294
[]
[cavity_pressure_x]
type = Pressure
boundary = left
variable = disp_r
component = 0
postprocessor = p_bh # note, this lags
use_displaced_mesh = false
[]
[]
[Postprocessors]
[p_bh]
type = PointValue
variable = pwater
point = '0.1 0 0'
execute_on = timestep_begin
use_displaced_mesh = false
[]
[mineral_bh] # mineral concentration (m^3(mineral)/m^3(rock)) at the borehole
type = PointValue
variable = mineral_conc_m3_per_m3
point = '0.1 0 0'
use_displaced_mesh = false
[]
[]
[VectorPostprocessors]
[ptsuss]
type = LineValueSampler
use_displaced_mesh = false
start_point = '0.1 0 0'
end_point = '5000 0 0'
sort_by = x
num_points = 50000
outputs = csv
variable = 'pwater temp sgas disp_r stress_rr stress_tt mineral_conc_m3_per_m3 porosity'
[]
[]
[Preconditioning]
active = 'smp'
[smp]
type = SMP
full = true
#petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu NONZERO 2 1E2 1E-5 50'
[]
[mumps]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -pc_factor_mat_solver_package -pc_factor_shift_type -snes_rtol -snes_atol -snes_max_it'
petsc_options_value = 'gmres lu mumps NONZERO 1E-5 1E2 50'
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
end_time = 1.5768e8
#dtmax = 1e6
[TimeStepper]
type = IterationAdaptiveDT
dt = 1
growth_factor = 1.1
[]
[]
[Outputs]
print_linear_residuals = false
sync_times = '3600 86400 2.592E6 1.5768E8'
perf_graph = true
exodus = true
[csv]
type = CSV
sync_only = true
[]
[]
(modules/porous_flow/test/tests/actions/unsat_except2.i)
# Check PorousFlowUnsaturated throws an error when the number of save_component_rate_in is incorrectly sized
[Mesh]
type = GeneratedMesh
dim = 1
nx = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[PorousFlowUnsaturated]
porepressure = pp
dictator_name = dictator
fp = simple_fluid
save_component_rate_in = 'comp0_rate comp1_rate'
[]
[Variables]
[pp]
[]
[]
[AuxVariables]
[comp0_rate]
[]
[comp1_rate]
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
[]
[]
[Materials]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-13 0 0 0 1E-13 0 0 0 1E-13'
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.3
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
(modules/porous_flow/test/tests/sinks/s02.i)
# apply a sink flux with use_mobility=true and observe the correct behavior
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = 0
xmax = 1
ymin = 0
ymax = 1
zmin = 0
zmax = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Variables]
[pp]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = y+1
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.3
density0 = 1.1
thermal_expansion = 0
viscosity = 1.1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0.2 0 0 0 0.1 0 0 0 0.1'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[AuxVariables]
[flux_out]
[]
[xval]
[]
[yval]
[]
[]
[ICs]
[xval]
type = FunctionIC
variable = xval
function = x
[]
[yval]
type = FunctionIC
variable = yval
function = y
[]
[]
[Postprocessors]
[p00]
type = PointValue
point = '0 0 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[m00]
type = ParsedPostprocessor
expression = 'vol*por*dens0*exp(p00/bulk)'
constant_names = 'vol por dens0 bulk'
constant_expressions = '0.25 0.1 1.1 1.3'
pp_names = 'p00'
execute_on = 'initial timestep_end'
[]
[dm00]
type = ChangeOverTimePostprocessor
postprocessor = m00
outputs = none
[]
[m00_prev]
type = ParsedPostprocessor
expression = 'm00 - dm00'
pp_names = 'm00 dm00'
outputs = 'console'
[]
[del_m00]
type = ParsedPostprocessor
expression = 'fcn*perm*dens0*exp(p00/bulk)/visc*area*dt'
constant_names = 'fcn perm dens0 bulk visc area dt'
constant_expressions = '6 0.2 1.1 1.3 1.1 0.5 1E-3'
pp_names = 'p00'
outputs = 'console'
[]
[m00_expect]
type = ParsedPostprocessor
expression = 'm00_prev - del_m00'
pp_names = 'm00_prev del_m00'
[]
[p10]
type = PointValue
point = '1 0 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[p01]
type = PointValue
point = '0 1 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[m01]
type = ParsedPostprocessor
expression = 'vol*por*dens0*exp(p01/bulk)'
constant_names = 'vol por dens0 bulk'
constant_expressions = '0.25 0.1 1.1 1.3'
pp_names = 'p01'
execute_on = 'initial timestep_end'
[]
[dm01]
type = ChangeOverTimePostprocessor
postprocessor = m01
outputs = none
[]
[m01_prev]
type = ParsedPostprocessor
expression = 'm01 - dm01'
pp_names = 'm01 dm01'
outputs = 'console'
[]
[del_m01]
type = ParsedPostprocessor
expression = 'fcn*perm*dens0*exp(p01/bulk)/visc*area*dt'
constant_names = 'fcn perm dens0 bulk visc area dt'
constant_expressions = '6 0.2 1.1 1.3 1.1 0.5 1E-3'
pp_names = 'p01'
outputs = 'console'
[]
[m01_expect]
type = ParsedPostprocessor
expression = 'm01_prev - del_m01'
pp_names = 'm01_prev del_m01'
[]
[p11]
type = PointValue
point = '1 1 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[]
[BCs]
[flux]
type = PorousFlowSink
boundary = 'left'
variable = pp
use_mobility = true
use_relperm = true
fluid_phase = 0
flux_function = 6
save_in = flux_out
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_max_it -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu 10000 NONZERO 2'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E-3
end_time = 0.03
nl_rel_tol = 1E-12
nl_abs_tol = 1E-12
[]
[Outputs]
file_base = s02
[console]
type = Console
execute_on = 'nonlinear linear'
time_step_interval = 30
[]
[csv]
type = CSV
execute_on = 'timestep_end'
time_step_interval = 3
[]
[]
(modules/porous_flow/test/tests/adaptivity/hex_adaptivity.i)
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 3
nx = 2
ny = 2
[]
[]
[Adaptivity]
marker = marker
max_h_level = 1
[Markers]
[marker]
type = UniformMarker
mark = REFINE
[]
[]
[]
[GlobalParams]
PorousFlowDictator = 'dictator'
[]
[Variables]
[pp]
initial_condition = '0'
[]
[]
[Kernels]
[mass]
type = PorousFlowMassTimeDerivative
variable = pp
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = pp
gravity = '0 0 0'
[]
[]
[BCs]
[left]
type = DirichletBC
variable = pp
boundary = 'left'
value = 1
[]
[right]
type = DirichletBC
variable = pp
boundary = 'right'
value = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.2
density0 = 1
viscosity = 1
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = 'pp'
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = '0.1'
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-3 0 0 0 1e-3 0 0 0 1e-3'
[]
[relperm]
type = PorousFlowRelativePermeabilityConst
phase = 0
[]
[]
[Postprocessors]
[numdofs]
type = NumDOFs
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
end_time = 4
dt = 1
solve_type = Newton
nl_abs_tol = 1e-12
[]
[Outputs]
exodus = true
perf_graph = true
show = pp
[]
(modules/porous_flow/test/tests/hysteresis/hys_order_07.i)
# Test that PorousFlowHysteresisOrder correctly calculates hysteresis order
# Hysteresis order is initialised = 3, with turning points = (0.5, 0.8, 0.66)
# Initial saturation is 0.71
# Water is removed from the system (so order = 3) until saturation = 0.66
# Then, water is removed from the system (so order = 2) until saturation = 0.65
# Then, water is added to the system (so order = 3 with turning point = 0.65) until saturation = 0.8
# Then, water is added to the system (so order = 1) until saturation = 1
# Then, water is added to the system (so order = 0)
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = -9E5
[]
[]
[PorousFlowUnsaturated]
porepressure = pp
fp = simple_fluid
[]
[DiracKernels]
[source_sink_0]
type = PorousFlowPointSourceFromPostprocessor
point = '0 0 0'
mass_flux = sink_strength
variable = pp
[]
[source_sink_1]
type = PorousFlowPointSourceFromPostprocessor
point = '1 0 0'
mass_flux = sink_strength
variable = pp
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosityConst
porosity = 1.0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0 0 0 0 0 0 0 0 0'
[]
[hys_order]
type = PorousFlowHysteresisOrder
initial_order = 3
previous_turning_points = '0.6 0.8 0.66'
[]
[]
[AuxVariables]
[hys_order]
family = MONOMIAL
order = CONSTANT
[]
[tp0]
family = MONOMIAL
order = CONSTANT
[]
[tp1]
family = MONOMIAL
order = CONSTANT
[]
[tp2]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[hys_order]
type = PorousFlowPropertyAux
variable = hys_order
property = hysteresis_order
[]
[tp0]
type = PorousFlowPropertyAux
variable = tp0
property = hysteresis_saturation_turning_point
hysteresis_turning_point = 0
[]
[tp1]
type = PorousFlowPropertyAux
variable = tp1
property = hysteresis_saturation_turning_point
hysteresis_turning_point = 1
[]
[tp2]
type = PorousFlowPropertyAux
variable = tp2
property = hysteresis_saturation_turning_point
hysteresis_turning_point = 2
[]
[]
[Functions]
[sink_strength_fcn]
type = ParsedFunction
expression = '30 * if(t <= 1, -1, 1)'
[]
[]
[Postprocessors]
[sink_strength]
type = FunctionValuePostprocessor
function = sink_strength_fcn
outputs = 'none'
[]
[saturation]
type = PointValue
point = '0 0 0'
variable = saturation0
[]
[hys_order]
type = PointValue
point = '0 0 0'
variable = hys_order
[]
[tp0]
type = PointValue
point = '0 0 0'
variable = tp0
[]
[tp1]
type = PointValue
point = '0 0 0'
variable = tp1
[]
[tp2]
type = PointValue
point = '0 0 0'
variable = tp2
[]
[]
[Preconditioning]
[basic]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 9
nl_abs_tol = 1E-7
[]
[Outputs]
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_steady_action.i)
# Pressure pulse in 1D with 1 phase - steady
# This file employs the PorousFlowFullySaturated Action. For the non-Action version see pressure_pulse_1d.i
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 2E6
[]
[]
[PorousFlowFullySaturated]
porepressure = pp
gravity = '0 0 0'
fp = simple_fluid
stabilization = Full
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[]
[Materials]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-15'
[]
[]
[BCs]
[left]
type = DirichletBC
boundary = left
value = 3E6
variable = pp
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Steady
solve_type = Newton
[]
[Postprocessors]
[p000]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = 'initial timestep_end'
[]
[p010]
type = PointValue
variable = pp
point = '10 0 0'
execute_on = 'initial timestep_end'
[]
[p020]
type = PointValue
variable = pp
point = '20 0 0'
execute_on = 'initial timestep_end'
[]
[p030]
type = PointValue
variable = pp
point = '30 0 0'
execute_on = 'initial timestep_end'
[]
[p040]
type = PointValue
variable = pp
point = '40 0 0'
execute_on = 'initial timestep_end'
[]
[p050]
type = PointValue
variable = pp
point = '50 0 0'
execute_on = 'initial timestep_end'
[]
[p060]
type = PointValue
variable = pp
point = '60 0 0'
execute_on = 'initial timestep_end'
[]
[p070]
type = PointValue
variable = pp
point = '70 0 0'
execute_on = 'initial timestep_end'
[]
[p080]
type = PointValue
variable = pp
point = '80 0 0'
execute_on = 'initial timestep_end'
[]
[p090]
type = PointValue
variable = pp
point = '90 0 0'
execute_on = 'initial timestep_end'
[]
[p100]
type = PointValue
variable = pp
point = '100 0 0'
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
file_base = pressure_pulse_1d_steady
print_linear_residuals = false
csv = true
[]
(modules/porous_flow/examples/tutorial/03.i)
# Darcy flow with heat advection and conduction
[Mesh]
[annular]
type = AnnularMeshGenerator
nr = 10
rmin = 1.0
rmax = 10
growth_r = 1.4
nt = 4
dmin = 0
dmax = 90
[]
[make3D]
type = MeshExtruderGenerator
extrusion_vector = '0 0 12'
num_layers = 3
bottom_sideset = 'bottom'
top_sideset = 'top'
input = annular
[]
[shift_down]
type = TransformGenerator
transform = TRANSLATE
vector_value = '0 0 -6'
input = make3D
[]
[aquifer]
type = SubdomainBoundingBoxGenerator
block_id = 1
bottom_left = '0 0 -2'
top_right = '10 10 2'
input = shift_down
[]
[injection_area]
type = ParsedGenerateSideset
combinatorial_geometry = 'x*x+y*y<1.01'
included_subdomains = 1
new_sideset_name = 'injection_area'
input = 'aquifer'
[]
[rename]
type = RenameBlockGenerator
old_block = '0 1'
new_block = 'caps aquifer'
input = 'injection_area'
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[porepressure]
[]
[temperature]
initial_condition = 293
scaling = 1E-8
[]
[]
[PorousFlowBasicTHM]
porepressure = porepressure
temperature = temperature
coupling_type = ThermoHydro
gravity = '0 0 0'
fp = the_simple_fluid
[]
[BCs]
[constant_injection_porepressure]
type = DirichletBC
variable = porepressure
value = 1E6
boundary = injection_area
[]
[constant_injection_temperature]
type = DirichletBC
variable = temperature
value = 313
boundary = injection_area
[]
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2E9
viscosity = 1.0E-3
density0 = 1000.0
thermal_expansion = 0.0002
cp = 4194
cv = 4186
porepressure_coefficient = 0
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[biot_modulus]
type = PorousFlowConstantBiotModulus
biot_coefficient = 0.8
solid_bulk_compliance = 2E-7
fluid_bulk_modulus = 1E7
[]
[permeability_aquifer]
type = PorousFlowPermeabilityConst
block = aquifer
permeability = '1E-14 0 0 0 1E-14 0 0 0 1E-14'
[]
[permeability_caps]
type = PorousFlowPermeabilityConst
block = caps
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-16'
[]
[thermal_expansion]
type = PorousFlowConstantThermalExpansionCoefficient
biot_coefficient = 0.8
drained_coefficient = 0.003
fluid_coefficient = 0.0002
[]
[rock_internal_energy]
type = PorousFlowMatrixInternalEnergy
density = 2500.0
specific_heat_capacity = 1200.0
[]
[thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '10 0 0 0 10 0 0 0 10'
block = 'caps aquifer'
[]
[]
[Preconditioning]
active = basic
[basic]
type = SMP
full = true
petsc_options = '-ksp_diagonal_scale -ksp_diagonal_scale_fix'
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = ' asm lu NONZERO 2'
[]
[preferred_but_might_not_be_installed]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu mumps'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1E6
dt = 1E5
nl_abs_tol = 1E-10
[]
[Outputs]
exodus = true
[]
(modules/porous_flow/test/tests/flux_limited_TVD_pflow/jacobian_03.i)
# Checking the Jacobian of Flux-Limited TVD Advection, 2 phases, 2 components, using flux_limiter_type = None
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
xmin = 0
xmax = 1
ny = 2
ymin = -1
ymax = 2
bias_y = 1.5
[]
[GlobalParams]
gravity = '1 2 -0.5'
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[massfrac_ph0_sp0]
[]
[massfrac_ph1_sp0]
[]
[]
[ICs]
[ppwater]
type = RandomIC
variable = ppwater
min = -1
max = 0
[]
[ppgas]
type = RandomIC
variable = ppgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 1
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 1
[]
[]
[Kernels]
[flux_ph0_sp0]
type = PorousFlowFluxLimitedTVDAdvection
variable = ppwater
advective_flux_calculator = advective_flux_calculator_ph0_sp0
[]
[flux_ph0_sp1]
type = PorousFlowFluxLimitedTVDAdvection
variable = ppgas
advective_flux_calculator = advective_flux_calculator_ph0_sp1
[]
[flux_ph1_sp0]
type = PorousFlowFluxLimitedTVDAdvection
variable = massfrac_ph0_sp0
advective_flux_calculator = advective_flux_calculator_ph1_sp0
[]
[flux_ph1_sp1]
type = PorousFlowFluxLimitedTVDAdvection
variable = massfrac_ph1_sp0
advective_flux_calculator = advective_flux_calculator_ph1_sp1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1.4
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas massfrac_ph0_sp0 massfrac_ph1_sp0'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1
m = 0.5
[]
[advective_flux_calculator_ph0_sp0]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
flux_limiter_type = None
phase = 0
fluid_component = 0
[]
[advective_flux_calculator_ph0_sp1]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
flux_limiter_type = None
phase = 0
fluid_component = 1
[]
[advective_flux_calculator_ph1_sp0]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
flux_limiter_type = None
phase = 1
fluid_component = 0
[]
[advective_flux_calculator_ph1_sp1]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
flux_limiter_type = None
phase = 1
fluid_component = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.21 0 0 0 1.5 0 0 0 0.8'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-snes_type'
petsc_options_value = 'test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1
num_steps = 1
dt = 1
[]
(modules/porous_flow/test/tests/recover/theis.i)
# Tests that PorousFlow can successfully recover using a checkpoint file.
# This test contains stateful material properties, adaptivity and integrated
# boundary conditions with nodal-sized materials.
#
# This test file is run three times:
# 1) The full input file is run to completion
# 2) The input file is run for half the time and checkpointing is included
# 3) The input file is run in recovery using the checkpoint data
#
# The final output of test 3 is compared to the final output of test 1 to verify
# that recovery was successful.
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
nx = 20
xmax = 100
bias_x = 1.05
[]
coord_type = RZ
rz_coord_axis = Y
# To get consistent ordering of results with distributed meshes
allow_renumbering = false
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Adaptivity]
marker = marker
max_h_level = 4
[Indicators]
[front]
type = GradientJumpIndicator
variable = zi
[]
[]
[Markers]
[marker]
type = ErrorFractionMarker
indicator = front
refine = 0.8
coarsen = 0.2
[]
[]
[]
[AuxVariables]
[saturation_gas]
order = CONSTANT
family = MONOMIAL
[]
[x1]
order = CONSTANT
family = MONOMIAL
[]
[y0]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[saturation_gas]
type = PorousFlowPropertyAux
variable = saturation_gas
property = saturation
phase = 1
execute_on = timestep_end
[]
[x1]
type = PorousFlowPropertyAux
variable = x1
property = mass_fraction
phase = 0
fluid_component = 1
execute_on = timestep_end
[]
[y0]
type = PorousFlowPropertyAux
variable = y0
property = mass_fraction
phase = 1
fluid_component = 0
execute_on = timestep_end
[]
[]
[Variables]
[pgas]
initial_condition = 20e6
[]
[zi]
initial_condition = 0
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pgas
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pgas
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = zi
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = zi
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas zi'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[fs]
type = PorousFlowWaterNCG
water_fp = water
gas_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[water]
type = Water97FluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 20
[]
[waterncg]
type = PorousFlowFluidState
gas_porepressure = pgas
z = zi
temperature_unit = Celsius
capillary_pressure = pc
fluid_state = fs
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.1
sum_s_res = 0.1
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
[]
[]
[BCs]
[aquifer]
type = PorousFlowPiecewiseLinearSink
variable = pgas
boundary = right
pt_vals = '0 1e8'
multipliers = '0 1e8'
flux_function = 1e-6
PT_shift = 20e6
[]
[]
[DiracKernels]
[source]
type = PorousFlowSquarePulsePointSource
point = '0 0 0'
mass_flux = 2
variable = zi
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
end_time = 2e2
dt = 50
[]
[VectorPostprocessors]
[line]
type = NodalValueSampler
sort_by = x
variable = 'pgas zi'
[]
[]
[Outputs]
print_linear_residuals = false
perf_graph = true
csv = true
[]
(modules/porous_flow/test/tests/actions/block_restricted_and_not.i)
# This input file illustrates that the PorousFlow Joiners can correctly join block-restricted Materials, even when one PorousFlow material type (relative permeability and fluid properties in this case) is block-restricted for one phase and not block-restricted for another
[Mesh]
[gmg]
type = GeneratedMeshGenerator
dim = 1
nx = 10
xmin = 0
xmax = 10
[]
[block1]
type = SubdomainBoundingBoxGenerator
input = gmg
block_id = 1
bottom_left = '3 -1 -1'
top_right = '6 1 1'
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'p0 p1'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
[]
[]
[Variables]
[p0]
[]
[p1]
[]
[]
[Kernels]
[dot0]
type = PorousFlowMassTimeDerivative
variable = p0
fluid_component = 0
[]
[dot1]
type = PorousFlowAdvectiveFlux
variable = p1
gravity = '0 0 0'
fluid_component = 1
[]
[]
[AuxVariables]
[m0]
[]
[m1]
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
capillary_pressure = pc
phase0_porepressure = p0
phase1_porepressure = p1
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'm0 m1'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[simple_fluid10]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 1
block = 0
[]
[simple_fluid11]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 1
block = 1
[]
[porosity0]
type = PorousFlowPorosityConst
porosity = 0.1
block = 0
[]
[porosity1]
type = PorousFlowPorosityConst
porosity = 0.1
block = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0 0 0 0 0 0 0 0 0'
[]
[relperm00]
type = PorousFlowRelativePermeabilityConst
phase = 0
block = 0
[]
[relperm01]
type = PorousFlowRelativePermeabilityConst
phase = 0
block = 1
[]
[relperm1_nonblockrestricted]
type = PorousFlowRelativePermeabilityConst
phase = 1
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
(modules/porous_flow/test/tests/actions/basicthm_th.i)
# PorousFlowBasicTHM action with coupling_type = ThermoHydroGenerator
# (no mechanical effects)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
nx = 10
ny = 3
xmax = 10
ymax = 3
[]
[aquifer]
input = gen
type = SubdomainBoundingBoxGenerator
block_id = 1
bottom_left = '0 1 0'
top_right = '10 2 0'
[]
[injection_area]
type = SideSetsAroundSubdomainGenerator
block = 1
new_boundary = 'injection_area'
normal = '-1 0 0'
input = 'aquifer'
[]
[outflow_area]
type = SideSetsAroundSubdomainGenerator
block = 1
new_boundary = 'outflow_area'
normal = '1 0 0'
input = 'injection_area'
[]
[rename]
type = RenameBlockGenerator
old_block = '0 1'
new_block = 'caprock aquifer'
input = 'outflow_area'
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[porepressure]
initial_condition = 1e6
[]
[temperature]
initial_condition = 293
scaling = 1e-6
[]
[]
[PorousFlowBasicTHM]
porepressure = porepressure
temperature = temperature
coupling_type = ThermoHydro
gravity = '0 0 0'
fp = simple_fluid
[]
[BCs]
[constant_injection_porepressure]
type = DirichletBC
variable = porepressure
value = 1.5e6
boundary = injection_area
[]
[constant_injection_temperature]
type = DirichletBC
variable = temperature
value = 313
boundary = injection_area
[]
[constant_outflow_porepressure]
type = PorousFlowPiecewiseLinearSink
variable = porepressure
boundary = outflow_area
pt_vals = '0 1e9'
multipliers = '0 1e9'
flux_function = 1e-6
PT_shift = 1e6
[]
[constant_outflow_temperature]
type = DirichletBC
variable = temperature
value = 293
boundary = outflow_area
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[biot_modulus]
type = PorousFlowConstantBiotModulus
biot_coefficient = 0.8
solid_bulk_compliance = 2e-7
fluid_bulk_modulus = 1e7
[]
[permeability_aquifer]
type = PorousFlowPermeabilityConst
block = aquifer
permeability = '1e-13 0 0 0 1e-13 0 0 0 1e-13'
[]
[permeability_caprock]
type = PorousFlowPermeabilityConst
block = caprock
permeability = '1e-15 0 0 0 1e-15 0 0 0 1e-15'
[]
[thermal_expansion]
type = PorousFlowConstantThermalExpansionCoefficient
biot_coefficient = 0.8
drained_coefficient = 0.003
fluid_coefficient = 0.0002
[]
[rock_internal_energy]
type = PorousFlowMatrixInternalEnergy
density = 2500.0
specific_heat_capacity = 1200.0
[]
[thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '10 0 0 0 10 0 0 0 10'
block = 'caprock aquifer'
[]
[]
[Preconditioning]
[basic]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1e4
dt = 1e3
nl_abs_tol = 1e-15
nl_rel_tol = 1e-14
[]
[Outputs]
exodus = true
[]
(modules/porous_flow/test/tests/dirackernels/pls03_action.i)
# Test that the upwinding works correctly.
#
# A poly-line sink sits at the centre of the element.
# It has length=4 and weight=0.5, and extracts fluid
# at a constant rate of
# (1 * relative_permeability) kg.m^-1.s^-1
# Since it sits at the centre of the element, it extracts
# equally from each node, so the rate of extraction from
# each node is
# (0.5 * relative_permeability) kg.s^-1
# including the length and weight effects.
#
# There is no fluid flow.
#
# The initial conditions are such that all nodes have
# relative_permeability=0, except for one which has
# relative_permeaility = 1. Therefore, all nodes should
# remain at their initial porepressure, except the one.
#
# The porosity is 0.1, and the elemental volume is 2,
# so the fluid mass at the node in question = 0.2 * density / 4,
# where the 4 is the number of nodes in the element.
# In this simulation density = dens0 * exp(P / bulk), with
# dens0 = 100, and bulk = 20 MPa.
# The initial porepressure P0 = 10 MPa, so the final (after
# 1 second of simulation) is
# P(t=1) = 8.748592 MPa
[Mesh]
type = GeneratedMesh
dim = 2
nx = 1
ny = 1
xmin = 0
xmax = 2
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
thermal_expansion = 0.0
bulk_modulus = 2.0E7
viscosity = 1.0
density0 = 100.0
[]
[]
[PorousFlowUnsaturated]
porepressure = pp
gravity = '0 0 0'
fp = the_simple_fluid
van_genuchten_alpha = 1.0E-7
van_genuchten_m = 0.5
relative_permeability_exponent = 2
residual_saturation = 0.99
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
#function = if((x<1)&(y<0.5),1E7,-1E7)
function = if((x<1)&(y>0.5),1E7,-1E7)
#function = if((x>1)&(y<0.5),1E7,-1E7)
#function = if((x>1)&(y>0.5),1E7,-1E7)
[]
[]
[UserObjects]
[pls_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[]
[Materials]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0 0 0 0 0 0 0 0 0'
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[DiracKernels]
[pls]
type = PorousFlowPolyLineSink
fluid_phase = 0
point_file = pls03.bh
use_relative_permeability = true
line_length = 4
SumQuantityUO = pls_total_outflow_mass
variable = pp
p_or_t_vals = '0 1E7'
fluxes = '1 1'
[]
[]
[Postprocessors]
[pls_report]
type = PorousFlowPlotQuantity
uo = pls_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
indirect_dependencies = 'fluid_mass1 fluid_mass0 pls_report'
[]
[p00]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[p01]
type = PointValue
variable = pp
point = '0 1 0'
execute_on = timestep_end
[]
[p20]
type = PointValue
variable = pp
point = '2 0 0'
execute_on = timestep_end
[]
[p21]
type = PointValue
variable = pp
point = '2 1 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
expression = abs((a-c+d)/2/(a+c))
symbol_names = 'a c d'
symbol_values = 'fluid_mass1 fluid_mass0 pls_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 1
dt = 1
solve_type = NEWTON
[]
[Outputs]
file_base = pls03_action
exodus = false
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/examples/tidal/earth_tide_fullsat.i)
# A confined aquifer is fully saturated with water
# Earth tides apply strain to the aquifer and the resulting porepressure changes are recorded
#
# To replicate standard poroelasticity exactly:
# (1) the PorousFlowBasicTHM Action is used;
# (2) multiply_by_density = false;
# (3) PorousFlowConstantBiotModulus is used
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = 0
xmax = 1
ymin = 0
ymax = 1
zmin = 0
zmax = 1
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
PorousFlowDictator = dictator
block = 0
biot_coefficient = 0.6
multiply_by_density = false
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[porepressure]
[]
[]
[BCs]
[strain_x]
type = FunctionDirichletBC
variable = disp_x
function = earth_tide_x
boundary = 'left right'
[]
[strain_y]
type = FunctionDirichletBC
variable = disp_y
function = earth_tide_y
boundary = 'bottom top'
[]
[strain_z]
type = FunctionDirichletBC
variable = disp_z
function = earth_tide_z
boundary = 'back front'
[]
[]
[Functions]
[earth_tide_x]
type = ParsedFunction
expression = 'x*1E-8*(5*cos(t*2*pi) + 2*cos((t-0.5)*2*pi) + 1*cos((t+0.3)*0.5*pi))'
[]
[earth_tide_y]
type = ParsedFunction
expression = 'y*1E-8*(7*cos(t*2*pi) + 4*cos((t-0.3)*2*pi) + 7*cos((t+0.6)*0.5*pi))'
[]
[earth_tide_z]
type = ParsedFunction
expression = 'z*1E-8*(7*cos((t-0.5)*2*pi) + 4*cos((t-0.8)*2*pi) + 7*cos((t+0.1)*4*pi))'
[]
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2E9
[]
[]
[PorousFlowBasicTHM]
coupling_type = HydroMechanical
displacements = 'disp_x disp_y disp_z'
porepressure = porepressure
gravity = '0 0 0'
fp = the_simple_fluid
[]
[Materials]
[elasticity_tensor]
type = ComputeIsotropicElasticityTensor
bulk_modulus = 10.0E9 # drained bulk modulus
poissons_ratio = 0.25
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[porosity]
type = PorousFlowPorosityConst # only the initial value of this is ever used
porosity = 0.1
[]
[biot_modulus]
type = PorousFlowConstantBiotModulus
solid_bulk_compliance = 1E-10
fluid_bulk_modulus = 2E9
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[]
[Postprocessors]
[pp]
type = PointValue
point = '0.5 0.5 0.5'
variable = porepressure
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 0.01
end_time = 2
[]
[Outputs]
console = true
csv = true
[]
(modules/porous_flow/test/tests/sinks/s06.i)
# apply a half-cubic sink flux and observe the correct behavior
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = 0
xmax = 1
ymin = 0
ymax = 1
zmin = 0
zmax = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1.1
[]
[]
[Variables]
[pp]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = x*(y+1)
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.3
density0 = 1.1
thermal_expansion = 0
viscosity = 1.1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-5 0 0 0 1E-5 0 0 0 1E-5'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[AuxVariables]
[flux_out]
[]
[]
[Postprocessors]
[flux00]
type = PointValue
variable = flux_out
point = '0 0 0'
[]
[flux01]
type = PointValue
variable = flux_out
point = '0 1 0'
[]
[flux10]
type = PointValue
variable = flux_out
point = '1 0 0'
[]
[flux11]
type = PointValue
variable = flux_out
point = '1 1 0'
[]
[p00]
type = PointValue
point = '0 0 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[p10]
type = PointValue
point = '1 0 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[m10]
type = ParsedPostprocessor
expression = 'vol*por*dens0*exp(p10/bulk)*if(p10>=0,1,pow(1+pow(-al*p10,1.0/(1-m)),-m))'
constant_names = 'vol por dens0 bulk al m'
constant_expressions = '0.25 0.1 1.1 1.3 1.1 0.5'
pp_names = 'p10'
execute_on = 'initial timestep_end'
[]
[dm10]
type = ChangeOverTimePostprocessor
postprocessor = m10
outputs = none
[]
[m10_prev]
type = ParsedPostprocessor
expression = 'm10 - dm10'
pp_names = 'm10 dm10'
outputs = 'console'
[]
[m10_rate]
type = ParsedPostprocessor
expression = 'fcn*if(p10>center,m,if(p10<themin,0,m/c/c/c*(2*(p10-center)+c)*((p10-center)-c)*((p10-center)-c)))'
constant_names = 'm fcn center sd themin c'
constant_expressions = '2 3 0.9 0.5 0.1 -0.8'
pp_names = 'p10'
[]
[m10_expect]
type = ParsedPostprocessor
expression = 'm10_prev-m10_rate*area*dt'
constant_names = 'area dt'
constant_expressions = '0.5 2E-3'
pp_names = 'm10_prev m10_rate'
[]
[p01]
type = PointValue
point = '0 1 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[p11]
type = PointValue
point = '1 1 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[m11]
type = ParsedPostprocessor
expression = 'vol*por*dens0*exp(p11/bulk)*if(p11>=0,1,pow(1+pow(-al*p11,1.0/(1-m)),-m))'
constant_names = 'vol por dens0 bulk al m'
constant_expressions = '0.25 0.1 1.1 1.3 1.1 0.5'
pp_names = 'p11'
execute_on = 'initial timestep_end'
[]
[dm11]
type = ChangeOverTimePostprocessor
postprocessor = m11
outputs = none
[]
[m11_prev]
type = ParsedPostprocessor
expression = 'm11 - dm11'
pp_names = 'm11 dm11'
outputs = 'console'
[]
[m11_rate]
type = ParsedPostprocessor
expression = 'fcn*if(p11>center,m,if(p11<themin,0,m/c/c/c*(2*(p11-center)+c)*((p11-center)-c)*((p11-center)-c)))'
constant_names = 'm fcn center sd themin c'
constant_expressions = '2 3 0.9 0.5 0.1 -0.8'
pp_names = 'p11'
[]
[m11_expect]
type = ParsedPostprocessor
expression = 'm11_prev-m11_rate*area*dt'
constant_names = 'area dt'
constant_expressions = '0.5 2E-3'
pp_names = 'm11_prev m11_rate'
[]
[]
[BCs]
[flux]
type = PorousFlowHalfCubicSink
boundary = 'left right'
max = 2
cutoff = -0.8
center = 0.9
variable = pp
use_mobility = false
use_relperm = false
fluid_phase = 0
flux_function = 3
save_in = flux_out
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_max_it -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu 10000 NONZERO 2'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 2E-3
end_time = 6E-2
nl_rel_tol = 1E-12
nl_abs_tol = 1E-12
[]
[Outputs]
file_base = s06
[console]
type = Console
execute_on = 'nonlinear linear'
time_step_interval = 5
[]
[csv]
type = CSV
execute_on = 'timestep_end'
time_step_interval = 3
[]
[]
(modules/porous_flow/test/tests/mass_conservation/mass11.i)
# The sample is a single unit element, with roller BCs on the sides and bottom.
# The top is free to move and fluid is injected at a constant rate of 1kg/s
# There is no fluid flow.
# Fluid mass conservation is checked.
# Under these conditions the fluid mass should increase at 1kg/s
# The porepressure should increase: rho0 * exp(P/bulk) = rho * exp(P0/bulk) + 1*t
# The stress_zz should be exactly biot * P since total stress is zero
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -0.5
xmax = 0.5
ymin = -0.5
ymax = 0.5
zmin = -0.5
zmax = 0.5
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
PorousFlowDictator = dictator
block = 0
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[porepressure]
initial_condition = 0.1
[]
[]
[BCs]
[confinex]
type = DirichletBC
variable = disp_x
value = 0
boundary = 'left right'
[]
[confiney]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'bottom top'
[]
[basefixed]
type = DirichletBC
variable = disp_z
value = 0
boundary = back
[]
[]
[Kernels]
[grad_stress_x]
type = StressDivergenceTensors
variable = disp_x
component = 0
[]
[grad_stress_y]
type = StressDivergenceTensors
variable = disp_y
component = 1
[]
[grad_stress_z]
type = StressDivergenceTensors
variable = disp_z
component = 2
[]
[poro_x]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
variable = disp_x
component = 0
[]
[poro_y]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
variable = disp_y
component = 1
[]
[poro_z]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
component = 2
variable = disp_z
[]
[poro_vol_exp]
type = PorousFlowMassVolumetricExpansion
variable = porepressure
fluid_component = 0
[]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = porepressure
[]
[]
[DiracKernels]
[inject]
type = PorousFlowPointSourceFromPostprocessor
point = '0 0 0'
mass_flux = 1.0
variable = porepressure
[]
[]
[AuxVariables]
[stress_xx]
order = CONSTANT
family = MONOMIAL
[]
[stress_xy]
order = CONSTANT
family = MONOMIAL
[]
[stress_xz]
order = CONSTANT
family = MONOMIAL
[]
[stress_yy]
order = CONSTANT
family = MONOMIAL
[]
[stress_yz]
order = CONSTANT
family = MONOMIAL
[]
[stress_zz]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
[]
[stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
[]
[stress_xz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xz
index_i = 0
index_j = 2
[]
[stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
[]
[stress_yz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yz
index_i = 1
index_j = 2
[]
[stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '1 1.5'
# bulk modulus is lambda + 2*mu/3 = 1 + 2*1.5/3 = 2
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = porepressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0.5 0 0 0 0.5 0 0 0 0.5'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure disp_x disp_y disp_z'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Postprocessors]
[p0]
type = PointValue
outputs = 'console csv'
execute_on = 'initial timestep_end'
point = '0 0 0'
variable = porepressure
[]
[zdisp]
type = PointValue
outputs = csv
point = '0 0 0.5'
use_displaced_mesh = false
variable = disp_z
[]
[stress_xx]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_xx
[]
[stress_yy]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_yy
[]
[stress_zz]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_zz
[]
[fluid_mass]
type = PorousFlowFluidMass
fluid_component = 0
execute_on = 'initial timestep_end'
outputs = 'console csv'
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-14 1E-8 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
start_time = 0
end_time = 10
dt = 2
[]
[Outputs]
execute_on = 'initial timestep_end'
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/dirackernels/bh_except06.i)
# PorousFlowPeacemanBorehole exception test
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = TimeDerivative
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
bottom_p_or_t = 0
fluid_phase = 0
point_file = bh02.bh
use_mobility = true
SumQuantityUO = borehole_total_outflow_mass
variable = pp
unit_weight = '0 0 0'
character = 1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
expression = abs((a-c+d)/2/(a+c))
symbol_names = 'a c d'
symbol_values = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
(modules/porous_flow/test/tests/energy_conservation/heat04_rz.i)
# The sample is a single unit element in RZ coordinates
# A constant velocity is applied to the outer boundary is free to move as a source injects heat and fluid into the system
# There is no fluid flow or heat flow.
# Heat energy conservation is checked.
# Mass conservation is checked
[Mesh]
type = GeneratedMesh
dim = 2
nx = 1
ny = 1
xmin = 1
xmax = 2
ymin = -0.5
ymax = 0.5
coord_type = RZ
[]
[GlobalParams]
displacements = 'disp_r disp_z'
PorousFlowDictator = dictator
block = 0
biot_coefficient = 0.3
[]
[Variables]
[disp_r]
[]
[disp_z]
[]
[pp]
initial_condition = 0.1
[]
[temp]
initial_condition = 10
[]
[]
[BCs]
[plane_strain]
type = DirichletBC
variable = disp_z
value = 0
boundary = 'bottom top'
[]
[rmin_fixed]
type = DirichletBC
variable = disp_r
value = 0
boundary = left
[]
[contract]
type = FunctionDirichletBC
variable = disp_r
function = -0.01*t
boundary = right
[]
[]
[PorousFlowFullySaturated]
coupling_type = ThermoHydroMechanical
porepressure = pp
temperature = temp
fp = simple_fluid
[]
[DiracKernels]
[heat_source]
type = PorousFlowPointSourceFromPostprocessor
point = '1.5 0 0'
variable = temp
mass_flux = 10
[]
[fluid_source]
type = PorousFlowPointSourceFromPostprocessor
point = '1.5 0 0'
variable = pp
mass_flux = 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 1
viscosity = 1
thermal_expansion = 0
cv = 1.3
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '1 1.5'
# bulk modulus is lambda + 2*mu/3 = 1 + 2*1.5/3 = 2
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeAxisymmetricRZSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 2.2
density = 0.5
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0.5 0 0 0 0.5 0 0 0 0.5'
[]
[thermal_cond]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '1 0 0 0 1 0 0 0 1'
[]
[]
[Postprocessors]
[p0]
type = PointValue
outputs = 'console csv'
execute_on = 'initial timestep_end'
point = '1 0 0'
variable = pp
[]
[t0]
type = PointValue
outputs = 'console csv'
execute_on = 'initial timestep_end'
point = '1 0 0'
variable = temp
[]
[rdisp]
type = PointValue
outputs = 'csv console'
point = '2 0 0'
use_displaced_mesh = false
variable = disp_r
[]
[fluid_mass]
type = PorousFlowFluidMass
fluid_component = 0
execute_on = 'initial timestep_end'
outputs = 'console csv'
[]
[total_heat]
type = PorousFlowHeatEnergy
phase = 0
execute_on = 'initial timestep_end'
outputs = 'console csv'
[]
[rock_heat]
type = PorousFlowHeatEnergy
execute_on = 'initial timestep_end'
outputs = 'console csv'
[]
[fluid_heat]
type = PorousFlowHeatEnergy
include_porous_skeleton = false
phase = 0
execute_on = 'initial timestep_end'
outputs = 'console csv'
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 2
end_time = 10
[]
[Outputs]
execute_on = 'initial timestep_end'
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/dirackernels/hfrompps.i)
[Mesh]
type = GeneratedMesh
dim = 2
nx = 3
ny = 3
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pressure]
[]
[temperature]
scaling = 1E-6
[]
[]
[ICs]
[pressure_ic]
type = ConstantIC
variable = pressure
value = 1e6
[]
[temperature_ic]
type = ConstantIC
variable = temperature
value = 400
[]
[]
[Kernels]
[P_time_deriv]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pressure
[]
[P_flux]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pressure
gravity = '0 -9.8 0'
[]
[energy_dot]
type = PorousFlowEnergyTimeDerivative
variable = temperature
[]
[heat_conduction]
type = PorousFlowHeatConduction
variable = temperature
[]
[heat_advection]
type = PorousFlowHeatAdvection
variable = temperature
gravity = '0 -9.8 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pressure temperature'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureConst
[]
[]
[Functions]
[mass_flux_in_fn]
type = PiecewiseConstant
direction = left
xy_data = '
0 0
100 0.1
300 0
600 0.1
1400 0
1500 0.2'
[]
[T_in_fn]
type = PiecewiseLinear
xy_data = '
0 400
600 450'
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
at_nodes = true
[]
[fluid_props]
type = PorousFlowSingleComponentFluid
phase = 0
fp = simple_fluid
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[fp_mat]
type = FluidPropertiesMaterialPT
pressure = pressure
temperature = temperature
fp = simple_fluid
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 830.0
density = 2750
[]
[thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '2.5 0 0 0 2.5 0 0 0 2.5'
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.0E-15 0 0 0 1.0E-15 0 0 0 1.0E-14'
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[DiracKernels]
[source]
type = PorousFlowPointSourceFromPostprocessor
variable = pressure
mass_flux = mass_flux_in
point = '0.5 0.5 0'
[]
[source_h]
type = PorousFlowPointEnthalpySourceFromPostprocessor
variable = temperature
mass_flux = mass_flux_in
point = '0.5 0.5 0'
T_in = T_in
pressure = pressure
fp = simple_fluid
[]
[]
[Preconditioning]
[preferred]
type = SMP
full = true
petsc_options_iname = '-pc_type'
petsc_options_value = ' lu '
[]
[]
[Postprocessors]
[total_mass]
type = PorousFlowFluidMass
execute_on = 'initial timestep_end'
[]
[total_heat]
type = PorousFlowHeatEnergy
[]
[mass_flux_in]
type = FunctionValuePostprocessor
function = mass_flux_in_fn
execute_on = 'initial timestep_end'
[]
[avg_temp]
type = ElementAverageValue
variable = temperature
execute_on = 'initial timestep_end'
[]
[T_in]
type = FunctionValuePostprocessor
function = T_in_fn
execute_on = 'initial timestep_end'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
nl_abs_tol = 1e-14
dt = 100
end_time = 2000
[]
[Outputs]
csv = true
execute_on = 'initial timestep_end'
file_base = hfrompps
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_fv.i)
# Pressure pulse in 1D with 1 phase - transient FV model
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
family = MONOMIAL
order = CONSTANT
fv = true
initial_condition = 2E6
[]
[]
[FVKernels]
[mass0]
type = FVPorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[flux]
type = FVPorousFlowAdvectiveFlux
variable = pp
gravity = '0 0 0'
fluid_component = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[]
[Materials]
[temperature]
type = ADPorousFlowTemperature
temperature = 293
[]
[ppss]
type = ADPorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = ADPorousFlowMassFraction
[]
[simple_fluid]
type = ADPorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = ADPorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = ADPorousFlowPermeabilityConst
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-15'
[]
[relperm]
type = ADPorousFlowRelativePermeabilityConst
kr = 1
phase = 0
[]
[]
[FVBCs]
[left]
type = FVPorousFlowAdvectiveFluxBC
boundary = left
porepressure_value = 3E6
variable = pp
gravity = '0 0 0'
fluid_component = 0
phase = 0
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E3
end_time = 1E4
[]
[Postprocessors]
[p005]
type = PointValue
variable = pp
point = '5 0 0'
execute_on = 'initial timestep_end'
[]
[p015]
type = PointValue
variable = pp
point = '15 0 0'
execute_on = 'initial timestep_end'
[]
[p025]
type = PointValue
variable = pp
point = '25 0 0'
execute_on = 'initial timestep_end'
[]
[p035]
type = PointValue
variable = pp
point = '35 0 0'
execute_on = 'initial timestep_end'
[]
[p045]
type = PointValue
variable = pp
point = '45 0 0'
execute_on = 'initial timestep_end'
[]
[p055]
type = PointValue
variable = pp
point = '55 0 0'
execute_on = 'initial timestep_end'
[]
[p065]
type = PointValue
variable = pp
point = '65 0 0'
execute_on = 'initial timestep_end'
[]
[p075]
type = PointValue
variable = pp
point = '75 0 0'
execute_on = 'initial timestep_end'
[]
[p085]
type = PointValue
variable = pp
point = '85 0 0'
execute_on = 'initial timestep_end'
[]
[p095]
type = PointValue
variable = pp
point = '95 0 0'
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
file_base = pressure_pulse_1d_fv
print_linear_residuals = false
csv = true
[]
(modules/porous_flow/test/tests/jacobian/heat_advection02.i)
# 2phase, unsaturated, heat advection
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[temp]
[]
[pgas]
[]
[pwater]
[]
[]
[ICs]
[pgas]
type = RandomIC
variable = pgas
max = 1.0
min = 0.0
[]
[pwater]
type = RandomIC
variable = pwater
max = 0.0
min = -1.0
[]
[temp]
type = RandomIC
variable = temp
max = 1.0
min = 0.0
[]
[]
[Kernels]
[dummy_pgas]
type = Diffusion
variable = pgas
[]
[dummy_pwater]
type = Diffusion
variable = pwater
[]
[heat_advection]
type = PorousFlowHeatAdvection
variable = temp
gravity = '1 2 3'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp pgas pwater'
number_fluid_phases = 2
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 1
thermal_expansion = 0
viscosity = 1
cv = 1.1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.8
density0 = 0.7
thermal_expansion = 0
viscosity = 1.3
cv = 1.6
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = pwater
phase1_porepressure = pgas
capillary_pressure = pc
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/dirackernels/bh_except05.i)
# PorousFlowPeacemanBorehole exception test
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = TimeDerivative
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
bottom_p_or_t = 0
fluid_phase = 0
mass_fraction_component = 0
point_file = bh02.bh
SumQuantityUO = borehole_total_outflow_mass
variable = pp
unit_weight = '0 0 0'
character = 1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
expression = abs((a-c+d)/2/(a+c))
symbol_names = 'a c d'
symbol_values = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
(modules/porous_flow/test/tests/jacobian/basic_advection3.i)
# Basic advection with 1 porepressure as a PorousFlow variable
# Constant permeability
# Constant viscosity
[Mesh]
type = GeneratedMesh
dim = 1
nx = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[u]
[]
[P]
[]
[]
[ICs]
[P]
type = RandomIC
variable = P
min = -1
max = 0
[]
[u]
type = RandomIC
variable = u
[]
[]
[Kernels]
[dummy_P]
type = NullKernel
variable = P
[]
[u_advection]
type = PorousFlowBasicAdvection
variable = u
phase = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = P
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1
m = 0.6
sat_lr = 0.1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 3
density0 = 4
thermal_expansion = 0
viscosity = 150.0
[]
[]
[Materials]
[temperature_qp]
type = PorousFlowTemperature
[]
[ppss_qp]
type = PorousFlow1PhaseP
porepressure = P
capillary_pressure = pc
[]
[simple_fluid_qp]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '5 0 0 0 5 0 0 0 5'
[]
[relperm_qp]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.1
sum_s_res = 0.1
[]
[darcy_velocity_qp]
type = PorousFlowDarcyVelocityMaterial
gravity = '0.25 0 0'
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
#petsc_options = '-snes_test_display'
petsc_options_iname = '-snes_type'
petsc_options_value = ' test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1
[]
(modules/porous_flow/test/tests/hysteresis/2phasePP_jac.i)
# Test of derivatives computed in PorousFlow2PhaseHysPP
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '-1 0 0'
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
number_fluid_phases = 2
number_fluid_components = 2
porous_flow_vars = 'pp0 pp1'
[]
[]
[Variables]
[pp0]
initial_condition = 0
[]
[pp1]
initial_condition = 1
[]
[]
[Kernels]
[mass_conservation0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp0
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp0
[]
[mass_conservation1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = pp1
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = pp1
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[]
[FluidProperties]
[simple_fluid_0]
type = SimpleFluidProperties
bulk_modulus = 10
viscosity = 1
[]
[simple_fluid_1]
type = SimpleFluidProperties
bulk_modulus = 1
viscosity = 3
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[temperature]
type = PorousFlowTemperature
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid_0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid_1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 1 0 0 0 1'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
[]
[hys_order_material]
type = PorousFlowHysteresisOrder
[]
[pc_calculator]
type = PorousFlow2PhaseHysPP
alpha_d = 10.0
alpha_w = 7.0
n_d = 1.5
n_w = 1.9
S_l_min = 0.1
S_lr = 0.2
S_gr_max = 0.3
Pc_max = 12.0
high_ratio = 0.9
low_extension_type = quadratic
high_extension_type = power
phase0_porepressure = pp0
phase1_porepressure = pp1
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options = '-snes_check_jacobian'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
(modules/porous_flow/test/tests/jacobian/hgs01.i)
# apply a half-gaussian sink flux and observe the correct behavior
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 2
xmin = -1
xmax = 1
ymin = -1
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[massfrac_ph0_sp0]
[]
[massfrac_ph1_sp0]
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas massfrac_ph0_sp0 massfrac_ph1_sp0'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[ICs]
[ppwater]
type = RandomIC
variable = ppwater
min = -1
max = 0
[]
[ppgas]
type = RandomIC
variable = ppgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 1
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 1
[]
[]
[Kernels]
[dummy_ppwater]
type = TimeDerivative
variable = ppwater
[]
[dummy_ppgas]
type = TimeDerivative
variable = ppgas
[]
[dummy_m00]
type = TimeDerivative
variable = massfrac_ph0_sp0
[]
[dummy_m10]
type = TimeDerivative
variable = massfrac_ph1_sp0
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1.4
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[]
[BCs]
[flux_w]
type = PorousFlowHalfGaussianSink
boundary = 'left'
center = 0.1
sd = 1.1
max = 2.2
variable = ppwater
mass_fraction_component = 0
fluid_phase = 0
use_relperm = true
use_mobility = true
flux_function = 'x*y'
[]
[flux_g]
type = PorousFlowHalfGaussianSink
boundary = 'top left front'
center = 0.5
sd = 1.1
max = -2.2
mass_fraction_component = 0
variable = ppgas
fluid_phase = 1
use_relperm = true
use_mobility = true
flux_function = '-x*y'
[]
[flux_1]
type = PorousFlowHalfGaussianSink
boundary = 'right'
center = -0.1
sd = 1.1
max = 1.2
mass_fraction_component = 1
variable = massfrac_ph0_sp0
fluid_phase = 1
use_relperm = true
use_mobility = true
flux_function = '-1.1*x*y'
[]
[flux_2]
type = PorousFlowHalfGaussianSink
boundary = 'bottom'
center = 3.2
sd = 1.1
max = 1.2
mass_fraction_component = 1
variable = massfrac_ph1_sp0
fluid_phase = 1
use_relperm = true
use_mobility = true
flux_function = '0.5*x*y'
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 2
[]
[Outputs]
file_base = pls03
[]
(modules/porous_flow/examples/tutorial/08_KT.i)
# Unsaturated Darcy-Richards flow
[Mesh]
[annular]
type = AnnularMeshGenerator
nr = 10
rmin = 1.0
rmax = 10
growth_r = 1.4
nt = 4
dmin = 0
dmax = 90
[]
[make3D]
input = annular
type = MeshExtruderGenerator
extrusion_vector = '0 0 12'
num_layers = 3
bottom_sideset = 'bottom'
top_sideset = 'top'
[]
[shift_down]
type = TransformGenerator
transform = TRANSLATE
vector_value = '0 0 -6'
input = make3D
[]
[aquifer]
type = SubdomainBoundingBoxGenerator
block_id = 1
bottom_left = '0 0 -2'
top_right = '10 10 2'
input = shift_down
[]
[injection_area]
type = ParsedGenerateSideset
combinatorial_geometry = 'x*x+y*y<1.01'
included_subdomains = 1
new_sideset_name = 'injection_area'
input = 'aquifer'
[]
[rename]
type = RenameBlockGenerator
old_block = '0 1'
new_block = 'caps aquifer'
input = 'injection_area'
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[porepressure]
[]
[]
[PorousFlowUnsaturated]
porepressure = porepressure
coupling_type = Hydro
gravity = '0 0 0'
fp = the_simple_fluid
relative_permeability_exponent = 3
relative_permeability_type = Corey
residual_saturation = 0.1
van_genuchten_alpha = 1E-6
van_genuchten_m = 0.6
stabilization = KT
flux_limiter_type = None
[]
[BCs]
[production]
type = PorousFlowSink
variable = porepressure
fluid_phase = 0
flux_function = 1E-2
use_relperm = true
boundary = injection_area
[]
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2E9
viscosity = 1.0E-3
density0 = 1000.0
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[permeability_aquifer]
type = PorousFlowPermeabilityConst
block = aquifer
permeability = '1E-14 0 0 0 1E-14 0 0 0 1E-14'
[]
[permeability_caps]
type = PorousFlowPermeabilityConst
block = caps
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-16'
[]
[]
[Preconditioning]
active = basic
[basic]
type = SMP
full = true
petsc_options = '-ksp_diagonal_scale -ksp_diagonal_scale_fix'
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = ' asm lu NONZERO 2'
[]
[preferred_but_might_not_be_installed]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu mumps'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1E5
dt = 1E5
nl_rel_tol = 1E-14
[]
[Outputs]
exodus = true
[]
(modules/porous_flow/test/tests/gravity/fully_saturated_grav01a.i)
# Checking that gravity head is established
# 1phase, constant fluid-bulk, constant viscosity, constant permeability
# fully saturated
# For better agreement with the analytical solution (ana_pp), just increase nx
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
xmin = -1
xmax = 0
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[InitialCondition]
type = RandomIC
min = 0
max = 1
[]
[]
[]
[Kernels]
[flux0]
type = PorousFlowFullySaturatedDarcyBase
variable = pp
gravity = '-1 0 0'
[]
[]
[Functions]
[ana_pp]
type = ParsedFunction
symbol_names = 'g B p0 rho0'
symbol_values = '1 1.2 0 1'
expression = '-B*log(exp(-p0/B)+g*rho0*x/B)' # expected pp at base
[]
[]
[BCs]
[z]
type = DirichletBC
variable = pp
boundary = right
value = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.2
density0 = 1
viscosity = 1
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseFullySaturated
porepressure = pp
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[]
[Postprocessors]
[pp_base]
type = PointValue
variable = pp
point = '-1 0 0'
[]
[pp_analytical]
type = FunctionValuePostprocessor
function = ana_pp
point = '-1 0 0'
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Steady
solve_type = Newton
[]
[Outputs]
execute_on = 'timestep_end'
file_base = fully_saturated_grav01a
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/flux_limited_TVD_pflow/except05.i)
# Exception test: Dictator cannot determine the FEType and it is not properly specified in the AdvectiveFluxCalculator
[Mesh]
type = GeneratedMesh
dim = 1
[]
[GlobalParams]
gravity = '1 2 3'
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[tracer]
[]
[cm]
family = Monomial
order = constant
[]
[]
[Kernels]
[cm]
type = Diffusion
variable = cm
[]
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
[]
[]
[PorousFlowUnsaturated]
porepressure = pp
mass_fraction_vars = tracer
fp = the_simple_fluid
[]
[UserObjects]
[dummy_dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp cm'
number_fluid_phases = 1
number_fluid_components = 2
[]
[advective_flux_calculator]
type = PorousFlowAdvectiveFluxCalculatorSaturated
PorousFlowDictator = dummy_dictator
[]
[]
[Materials]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[]
[Executioner]
type = Steady
solve_type = Newton
[]
(modules/porous_flow/test/tests/poro_elasticity/terzaghi_fully_saturated_volume.i)
# Terzaghi's problem of consolodation of a drained medium
# The FullySaturated Kernels are used, with multiply_by_density = false
# so that this becomes a linear problem with constant Biot Modulus
#
# A saturated soil sample sits in a bath of water.
# It is constrained on its sides, and bottom.
# Its sides and bottom are also impermeable.
# Initially it is unstressed.
# A normal stress, q, is applied to the soil's top.
# The soil then slowly compresses as water is squeezed
# out from the sample from its top (the top BC for
# the porepressure is porepressure = 0).
#
# See, for example. Section 2.2 of the online manuscript
# Arnold Verruijt "Theory and Problems of Poroelasticity" Delft University of Technology 2013
# but note that the "sigma" in that paper is the negative
# of the stress in TensorMechanics
#
# Here are the problem's parameters, and their values:
# Soil height. h = 10
# Soil's Lame lambda. la = 2
# Soil's Lame mu, which is also the Soil's shear modulus. mu = 3
# Soil bulk modulus. K = la + 2*mu/3 = 4
# Soil confined compressibility. m = 1/(K + 4mu/3) = 0.125
# Soil bulk compliance. 1/K = 0.25
# Fluid bulk modulus. Kf = 8
# Fluid bulk compliance. 1/Kf = 0.125
# Fluid mobility (soil permeability/fluid viscosity). k = 1.5
# Soil initial porosity. phi0 = 0.1
# Biot coefficient. alpha = 0.6
# Soil initial storativity, which is the reciprocal of the initial Biot modulus. S = phi0/Kf + (alpha - phi0)(1 - alpha)/K = 0.0625
# Consolidation coefficient. c = k/(S + alpha^2 m) = 13.95348837
# Normal stress on top. q = 1
# Initial porepressure, resulting from instantaneous application of q, assuming corresponding instantaneous increase of porepressure (Note that this is calculated by MOOSE: we only need it for the analytical solution). p0 = alpha*m*q/(S + alpha^2 m) = 0.69767442
# Initial vertical displacement (down is positive), resulting from instantaneous application of q (Note this is calculated by MOOSE: we only need it for the analytical solution). uz0 = q*m*h*S/(S + alpha^2 m)
# Final vertical displacement (down in positive) (Note this is calculated by MOOSE: we only need it for the analytical solution). uzinf = q*m*h
#
# The solution for porepressure is
# P = 4*p0/\pi \sum_{k=1}^{\infty} \frac{(-1)^{k-1}}{2k-1} \cos ((2k-1)\pi z/(2h)) \exp(-(2k-1)^2 \pi^2 ct/(4 h^2))
# This series converges very slowly for ct/h^2 small, so in that domain
# P = p0 erf( (1-(z/h))/(2 \sqrt(ct/h^2)) )
#
# The degree of consolidation is defined as
# U = (uz - uz0)/(uzinf - uz0)
# where uz0 and uzinf are defined above, and
# uz = the vertical displacement of the top (down is positive)
# U = 1 - (8/\pi^2)\sum_{k=1}^{\infty} \frac{1}{(2k-1)^2} \exp(-(2k-1)^2 \pi^2 ct/(4 h^2))
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 10
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = 0
zmax = 10
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
PorousFlowDictator = dictator
block = 0
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure disp_x disp_y disp_z'
number_fluid_phases = 1
number_fluid_components = 1
[]
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[porepressure]
[]
[]
[BCs]
[confinex]
type = DirichletBC
variable = disp_x
value = 0
boundary = 'left right'
[]
[confiney]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'bottom top'
[]
[basefixed]
type = DirichletBC
variable = disp_z
value = 0
boundary = back
[]
[topdrained]
type = DirichletBC
variable = porepressure
value = 0
boundary = front
[]
[topload]
type = NeumannBC
variable = disp_z
value = -1
boundary = front
[]
[]
[Kernels]
[grad_stress_x]
type = StressDivergenceTensors
variable = disp_x
component = 0
[]
[grad_stress_y]
type = StressDivergenceTensors
variable = disp_y
component = 1
[]
[grad_stress_z]
type = StressDivergenceTensors
variable = disp_z
component = 2
[]
[poro_x]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.6
variable = disp_x
component = 0
[]
[poro_y]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.6
variable = disp_y
component = 1
[]
[poro_z]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.6
component = 2
variable = disp_z
[]
[mass0]
type = PorousFlowFullySaturatedMassTimeDerivative
coupling_type = HydroMechanical
biot_coefficient = 0.6
multiply_by_density = false
variable = porepressure
[]
[flux]
type = PorousFlowFullySaturatedDarcyBase
multiply_by_density = false
variable = porepressure
gravity = '0 0 0'
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 8
density0 = 1
thermal_expansion = 0
viscosity = 0.96
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '2 3'
# bulk modulus is lambda + 2*mu/3 = 2 + 2*3/3 = 4
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[eff_fluid_pressure_qp]
type = PorousFlowEffectiveFluidPressure
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[ppss]
type = PorousFlow1PhaseFullySaturated
porepressure = porepressure
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid_qp]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst # only the initial value of this is used
porosity = 0.1
[]
[biot_modulus]
type = PorousFlowConstantBiotModulus
biot_coefficient = 0.6
fluid_bulk_modulus = 8
solid_bulk_compliance = 0.25
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.5 0 0 0 1.5 0 0 0 1.5'
[]
[]
[Postprocessors]
[p0]
type = PointValue
outputs = csv
point = '0 0 0'
variable = porepressure
use_displaced_mesh = false
[]
[p1]
type = PointValue
outputs = csv
point = '0 0 1'
variable = porepressure
use_displaced_mesh = false
[]
[p2]
type = PointValue
outputs = csv
point = '0 0 2'
variable = porepressure
use_displaced_mesh = false
[]
[p3]
type = PointValue
outputs = csv
point = '0 0 3'
variable = porepressure
use_displaced_mesh = false
[]
[p4]
type = PointValue
outputs = csv
point = '0 0 4'
variable = porepressure
use_displaced_mesh = false
[]
[p5]
type = PointValue
outputs = csv
point = '0 0 5'
variable = porepressure
use_displaced_mesh = false
[]
[p6]
type = PointValue
outputs = csv
point = '0 0 6'
variable = porepressure
use_displaced_mesh = false
[]
[p7]
type = PointValue
outputs = csv
point = '0 0 7'
variable = porepressure
use_displaced_mesh = false
[]
[p8]
type = PointValue
outputs = csv
point = '0 0 8'
variable = porepressure
use_displaced_mesh = false
[]
[p9]
type = PointValue
outputs = csv
point = '0 0 9'
variable = porepressure
use_displaced_mesh = false
[]
[p99]
type = PointValue
outputs = csv
point = '0 0 10'
variable = porepressure
use_displaced_mesh = false
[]
[zdisp]
type = PointValue
outputs = csv
point = '0 0 10'
variable = disp_z
use_displaced_mesh = false
[]
[dt]
type = FunctionValuePostprocessor
outputs = console
function = if(0.5*t<0.1,0.5*t,0.1)
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
start_time = 0
end_time = 10
[TimeStepper]
type = PostprocessorDT
postprocessor = dt
dt = 0.0001
[]
[]
[Outputs]
execute_on = 'timestep_end'
file_base = terzaghi_fully_saturated_volume
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/thm_rehbinder/fixed_outer.i)
[Mesh]
[annular]
type = AnnularMeshGenerator
nr = 40
nt = 16
rmin = 0.1
rmax = 1
dmin = 0.0
dmax = 90
growth_r = 1.1
[]
[make3D]
input = annular
type = MeshExtruderGenerator
bottom_sideset = bottom
top_sideset = top
extrusion_vector = '0 0 1'
num_layers = 1
[]
# To get consistent ordering of results with distributed meshes
allow_renumbering = false
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
PorousFlowDictator = dictator
biot_coefficient = 1.0
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[porepressure]
[]
[temperature]
[]
[]
[BCs]
[plane_strain]
type = DirichletBC
variable = disp_z
value = 0
boundary = 'top bottom'
[]
[ymin]
type = DirichletBC
variable = disp_y
value = 0
boundary = dmin
[]
[xmin]
type = DirichletBC
variable = disp_x
value = 0
boundary = dmax
[]
[cavity_temperature]
type = DirichletBC
variable = temperature
value = 1000
boundary = rmin
[]
[cavity_porepressure]
type = DirichletBC
variable = porepressure
value = 1E6
boundary = rmin
[]
[cavity_zero_effective_stress_x]
type = Pressure
variable = disp_x
function = 1E6
boundary = rmin
use_displaced_mesh = false
[]
[cavity_zero_effective_stress_y]
type = Pressure
variable = disp_y
function = 1E6
boundary = rmin
use_displaced_mesh = false
[]
[outer_temperature]
type = DirichletBC
variable = temperature
value = 0
boundary = rmax
[]
[outer_pressure]
type = DirichletBC
variable = porepressure
value = 0
boundary = rmax
[]
[fixed_outer_x]
type = DirichletBC
variable = disp_x
value = 0
boundary = rmax
[]
[fixed_outer_y]
type = DirichletBC
variable = disp_y
value = 0
boundary = rmax
[]
[]
[AuxVariables]
[stress_rr]
family = MONOMIAL
order = CONSTANT
[]
[stress_pp]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[stress_rr]
type = RankTwoScalarAux
rank_two_tensor = stress
variable = stress_rr
scalar_type = RadialStress
point1 = '0 0 0'
point2 = '0 0 1'
[]
[stress_pp]
type = RankTwoScalarAux
rank_two_tensor = stress
variable = stress_pp
scalar_type = HoopStress
point1 = '0 0 0'
point2 = '0 0 1'
[]
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
thermal_expansion = 0.0
bulk_modulus = 1E12
viscosity = 1.0E-3
density0 = 1000.0
cv = 1000.0
cp = 1000.0
porepressure_coefficient = 0.0
[]
[]
[PorousFlowBasicTHM]
coupling_type = ThermoHydroMechanical
multiply_by_density = false
add_stress_aux = true
porepressure = porepressure
temperature = temperature
eigenstrain_names = thermal_contribution
gravity = '0 0 0'
fp = the_simple_fluid
[]
[Materials]
[elasticity_tensor]
type = ComputeIsotropicElasticityTensor
youngs_modulus = 1E10
poissons_ratio = 0.2
[]
[strain]
type = ComputeSmallStrain
eigenstrain_names = thermal_contribution
[]
[thermal_contribution]
type = ComputeThermalExpansionEigenstrain
temperature = temperature
thermal_expansion_coeff = 1E-6
eigenstrain_name = thermal_contribution
stress_free_temperature = 0.0
[]
[stress]
type = ComputeLinearElasticStress
[]
[porosity]
type = PorousFlowPorosityConst # only the initial value of this is ever used
porosity = 0.1
[]
[biot_modulus]
type = PorousFlowConstantBiotModulus
solid_bulk_compliance = 1E-10
fluid_bulk_modulus = 1E12
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[thermal_expansion]
type = PorousFlowConstantThermalExpansionCoefficient
fluid_coefficient = 1E-6
drained_coefficient = 1E-6
[]
[thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '1E6 0 0 0 1E6 0 0 0 1E6'
[]
[]
[VectorPostprocessors]
[P]
type = LineValueSampler
start_point = '0.1 0 0'
end_point = '1.0 0 0'
num_points = 10
sort_by = x
variable = porepressure
[]
[T]
type = LineValueSampler
start_point = '0.1 0 0'
end_point = '1.0 0 0'
num_points = 10
sort_by = x
variable = temperature
[]
[U]
type = LineValueSampler
start_point = '0.1 0 0'
end_point = '1.0 0 0'
num_points = 10
sort_by = x
variable = disp_x
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_rtol'
petsc_options_value = 'gmres asm lu 1E-10'
[]
[]
[Executioner]
type = Steady
solve_type = Newton
[]
[Outputs]
file_base = fixed_outer
execute_on = timestep_end
csv = true
[]
(modules/porous_flow/test/tests/hysteresis/except05.i)
# Exception testing of PorousFlowHysteresisOrder
# Incorrect: previous_turning_points not in the range [0, 1]
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[]
[PorousFlowBasicTHM]
porepressure = pp
fp = simple_fluid
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[biot_modulus]
type = PorousFlowConstantBiotModulus
biot_coefficient = 0.8
solid_bulk_compliance = 2e-7
fluid_bulk_modulus = 1e7
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-13 0 0 0 1e-13 0 0 0 1e-13'
[]
[hys_order]
type = PorousFlowHysteresisOrder
initial_order = 1
previous_turning_points = 1.1
[]
[]
[Preconditioning]
[basic]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
(modules/porous_flow/test/tests/jacobian/disp01.i)
# Test the Jacobian of the dispersive contribution to the diffusive component of
# the PorousFlowDisperiveFlux kernel. By setting disp_long and disp_trans to the same
# non-zero value, and diffusion to zero (by setting tortuosity to zero), the purely
# dispersive component of the flux is zero, and the only flux is due to the contribution
# from disp_trans on the diffusive flux.
[Mesh]
type = GeneratedMesh
dim = 2
nx = 3
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[massfrac0]
[]
[]
[ICs]
[pp]
type = RandomIC
variable = pp
max = 2e1
min = 1e1
[]
[massfrac0]
type = RandomIC
variable = massfrac0
min = 0
max = 1
[]
[]
[Kernels]
[diff0]
type = PorousFlowDispersiveFlux
fluid_component = 0
variable = pp
gravity = '1 0 0'
disp_long = 0.1
disp_trans = 0.1
[]
[diff1]
type = PorousFlowDispersiveFlux
fluid_component = 1
variable = massfrac0
gravity = '1 0 0'
disp_long = 0.1
disp_trans = 0.1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp massfrac0'
number_fluid_phases = 1
number_fluid_components = 2
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1e7
density0 = 10
thermal_expansion = 0
viscosity = 1
[]
[]
[Materials]
[temp]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseFullySaturated
porepressure = pp
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac0'
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[poro]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[diff]
type = PorousFlowDiffusivityConst
diffusion_coeff = '1e-2 1e-1'
tortuosity = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = PorousFlowRelativePermeabilityConst
phase = 0
[]
[]
[Preconditioning]
active = smp
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/combined/examples/geochem-porous_flow/forge/porous_flow.i)
# Input file modified from RobPodgorney version
# - 2D instead of 3D with different resolution. Effectively this means a 1m height of RobPodgorney aquifer is simulated. RobPodgorney total mass flux is 2.5kg/s meaning 0.25kg/s is appropriate here
# - Celsius instead of Kelvin
# - no use of PorousFlowPointEnthalpySourceFromPostprocessor since that is not yet merged into MOOSE: a DirichletBC is used instead
# - Use of PorousFlowFullySaturated instead of PorousFlowUnsaturated, and the save_component_rate_in feature to record the change in kg of each species at each node for passing to the Geochem simulation
# - MultiApps and Transfers to transfer information between this simulation and the aquifer_geochemistry.i simulation
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
nx = 225
ny = 200
xmin = -400
xmax = 500
ymin = -400
ymax = 400
[]
[injection_node]
input = gen
type = ExtraNodesetGenerator
new_boundary = injection_node
coord = '0 0 0'
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[f_H]
initial_condition = 8.201229858451E-07
[]
[f_Na]
initial_condition = 2.281094143525E-03
[]
[f_K]
initial_condition = 2.305489507836E-04
[]
[f_Ca]
initial_condition = 5.818776782059E-04
[]
[f_Mg]
initial_condition = 1.539513498238E-07
[]
[f_SiO2]
initial_condition = 2.691822196469E-04
[]
[f_Al]
initial_condition = 4.457519474122E-08
[]
[f_Cl]
initial_condition = 4.744309776594E-03
[]
[f_SO4]
initial_condition = 9.516650880811E-06
[]
[f_HCO3]
initial_condition = 5.906126982324E-05
[]
[porepressure]
initial_condition = 20E6
[]
[temperature]
initial_condition = 220 # degC
scaling = 1E-6 # fluid enthalpy is roughly 1E6
[]
[]
[BCs]
[source_temperature]
type = DirichletBC
boundary = injection_node
variable = temperature
value = 70 # degC
[]
[]
[DiracKernels]
[inject_H]
type = PorousFlowPointSourceFromPostprocessor
point = ' 0 0 0'
mass_flux = 4.790385871045E-08
variable = f_H
[]
[inject_Na]
type = PorousFlowPointSourceFromPostprocessor
point = ' 0 0 0'
mass_flux = 7.586252963780E-07
variable = f_Na
[]
[inject_K]
type = PorousFlowPointSourceFromPostprocessor
point = ' 0 0 0'
mass_flux = 2.746517625125E-07
variable = f_K
[]
[inject_Ca]
type = PorousFlowPointSourceFromPostprocessor
point = ' 0 0 0'
mass_flux = 7.775129478597E-07
variable = f_Ca
[]
[inject_Mg]
type = PorousFlowPointSourceFromPostprocessor
point = ' 0 0 0'
mass_flux = 1.749872109005E-07
variable = f_Mg
[]
[inject_SiO2]
type = PorousFlowPointSourceFromPostprocessor
point = ' 0 0 0'
mass_flux = 4.100547515915E-06
variable = f_SiO2
[]
[inject_Al]
type = PorousFlowPointSourceFromPostprocessor
point = ' 0 0 0'
mass_flux = 2.502408592080E-08
variable = f_Al
[]
[inject_Cl]
type = PorousFlowPointSourceFromPostprocessor
point = ' 0 0 0'
mass_flux = 1.997260386272E-06
variable = f_Cl
[]
[inject_SO4]
type = PorousFlowPointSourceFromPostprocessor
point = ' 0 0 0'
mass_flux = 2.497372164191E-07
variable = f_SO4
[]
[inject_HCO3]
type = PorousFlowPointSourceFromPostprocessor
point = ' 0 0 0'
mass_flux = 5.003150992902E-06
variable = f_HCO3
[]
[inject_H2O]
type = PorousFlowPointSourceFromPostprocessor
point = ' 0 0 0'
mass_flux = 2.499865905987E-01
variable = porepressure
[]
[produce_H]
type = PorousFlowPeacemanBorehole
variable = f_H
SumQuantityUO = produced_mass_H
mass_fraction_component = 0
point_file = production.bh
line_length = 1
bottom_p_or_t = 20E6
unit_weight = '0 0 0'
use_mobility = true
character = 1
[]
[produce_Na]
type = PorousFlowPeacemanBorehole
variable = f_Na
SumQuantityUO = produced_mass_Na
mass_fraction_component = 1
point_file = production.bh
line_length = 1
bottom_p_or_t = 20E6
unit_weight = '0 0 0'
use_mobility = true
character = 1
[]
[produce_K]
type = PorousFlowPeacemanBorehole
variable = f_K
SumQuantityUO = produced_mass_K
mass_fraction_component = 2
point_file = production.bh
line_length = 1
bottom_p_or_t = 20E6
unit_weight = '0 0 0'
use_mobility = true
character = 1
[]
[produce_Ca]
type = PorousFlowPeacemanBorehole
variable = f_Ca
SumQuantityUO = produced_mass_Ca
mass_fraction_component = 3
point_file = production.bh
line_length = 1
bottom_p_or_t = 20E6
unit_weight = '0 0 0'
use_mobility = true
character = 1
[]
[produce_Mg]
type = PorousFlowPeacemanBorehole
variable = f_Mg
SumQuantityUO = produced_mass_Mg
mass_fraction_component = 4
point_file = production.bh
line_length = 1
bottom_p_or_t = 20E6
unit_weight = '0 0 0'
use_mobility = true
character = 1
[]
[produce_SiO2]
type = PorousFlowPeacemanBorehole
variable = f_SiO2
SumQuantityUO = produced_mass_SiO2
mass_fraction_component = 5
point_file = production.bh
line_length = 1
bottom_p_or_t = 20E6
unit_weight = '0 0 0'
use_mobility = true
character = 1
[]
[produce_Al]
type = PorousFlowPeacemanBorehole
variable = f_Al
SumQuantityUO = produced_mass_Al
mass_fraction_component = 6
point_file = production.bh
line_length = 1
bottom_p_or_t = 20E6
unit_weight = '0 0 0'
use_mobility = true
character = 1
[]
[produce_Cl]
type = PorousFlowPeacemanBorehole
variable = f_Cl
SumQuantityUO = produced_mass_Cl
mass_fraction_component = 7
point_file = production.bh
line_length = 1
bottom_p_or_t = 20E6
unit_weight = '0 0 0'
use_mobility = true
character = 1
[]
[produce_SO4]
type = PorousFlowPeacemanBorehole
variable = f_SO4
SumQuantityUO = produced_mass_SO4
mass_fraction_component = 8
point_file = production.bh
line_length = 1
bottom_p_or_t = 20E6
unit_weight = '0 0 0'
use_mobility = true
character = 1
[]
[produce_HCO3]
type = PorousFlowPeacemanBorehole
variable = f_HCO3
SumQuantityUO = produced_mass_HCO3
mass_fraction_component = 9
point_file = production.bh
line_length = 1
bottom_p_or_t = 20E6
unit_weight = '0 0 0'
use_mobility = true
character = 1
[]
[produce_H2O]
type = PorousFlowPeacemanBorehole
variable = porepressure
SumQuantityUO = produced_mass_H2O
mass_fraction_component = 10
point_file = production.bh
line_length = 1
bottom_p_or_t = 20E6
unit_weight = '0 0 0'
use_mobility = true
character = 1
[]
[remove_heat_at_production_well]
type = PorousFlowPeacemanBorehole
variable = temperature
SumQuantityUO = produced_heat
point_file = production.bh
line_length = 1
bottom_p_or_t = 20E6
unit_weight = '0 0 0'
use_mobility = true
use_enthalpy = true
character = 1
[]
[]
[UserObjects]
[produced_mass_H]
type = PorousFlowSumQuantity
[]
[produced_mass_Na]
type = PorousFlowSumQuantity
[]
[produced_mass_K]
type = PorousFlowSumQuantity
[]
[produced_mass_Ca]
type = PorousFlowSumQuantity
[]
[produced_mass_Mg]
type = PorousFlowSumQuantity
[]
[produced_mass_SiO2]
type = PorousFlowSumQuantity
[]
[produced_mass_Al]
type = PorousFlowSumQuantity
[]
[produced_mass_Cl]
type = PorousFlowSumQuantity
[]
[produced_mass_SO4]
type = PorousFlowSumQuantity
[]
[produced_mass_HCO3]
type = PorousFlowSumQuantity
[]
[produced_mass_H2O]
type = PorousFlowSumQuantity
[]
[produced_heat]
type = PorousFlowSumQuantity
[]
[]
[Postprocessors]
[heat_extracted]
type = PorousFlowPlotQuantity
uo = produced_heat
[]
[approx_production_temperature]
type = PointValue
point = '100 0 0'
variable = temperature
[]
[mass_extracted_H]
type = PorousFlowPlotQuantity
uo = produced_mass_H
execute_on = 'initial timestep_end'
[]
[mass_extracted_Na]
type = PorousFlowPlotQuantity
uo = produced_mass_Na
execute_on = 'initial timestep_end'
[]
[mass_extracted_K]
type = PorousFlowPlotQuantity
uo = produced_mass_K
execute_on = 'initial timestep_end'
[]
[mass_extracted_Ca]
type = PorousFlowPlotQuantity
uo = produced_mass_Ca
execute_on = 'initial timestep_end'
[]
[mass_extracted_Mg]
type = PorousFlowPlotQuantity
uo = produced_mass_Mg
execute_on = 'initial timestep_end'
[]
[mass_extracted_SiO2]
type = PorousFlowPlotQuantity
uo = produced_mass_SiO2
execute_on = 'initial timestep_end'
[]
[mass_extracted_Al]
type = PorousFlowPlotQuantity
uo = produced_mass_Al
execute_on = 'initial timestep_end'
[]
[mass_extracted_Cl]
type = PorousFlowPlotQuantity
uo = produced_mass_Cl
execute_on = 'initial timestep_end'
[]
[mass_extracted_SO4]
type = PorousFlowPlotQuantity
uo = produced_mass_SO4
execute_on = 'initial timestep_end'
[]
[mass_extracted_HCO3]
type = PorousFlowPlotQuantity
uo = produced_mass_HCO3
execute_on = 'initial timestep_end'
[]
[mass_extracted_H2O]
type = PorousFlowPlotQuantity
uo = produced_mass_H2O
execute_on = 'initial timestep_end'
[]
[mass_extracted]
type = LinearCombinationPostprocessor
pp_names = 'mass_extracted_H mass_extracted_Na mass_extracted_K mass_extracted_Ca mass_extracted_Mg mass_extracted_SiO2 mass_extracted_Al mass_extracted_Cl mass_extracted_SO4 mass_extracted_HCO3 mass_extracted_H2O'
pp_coefs = '1 1 1 1 1 1 1 1 1 1 1'
execute_on = 'initial timestep_end'
[]
[dt]
type = TimestepSize
execute_on = 'timestep_begin'
[]
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
thermal_expansion = 2E-4
bulk_modulus = 2E9
viscosity = 1E-3
density0 = 980
cv = 4000.0
cp = 4000.0
porepressure_coefficient = 0
[]
[]
[PorousFlowFullySaturated]
coupling_type = ThermoHydro
porepressure = porepressure
temperature = temperature
mass_fraction_vars = 'f_H f_Na f_K f_Ca f_Mg f_SiO2 f_Al f_Cl f_SO4 f_HCO3'
save_component_rate_in = 'rate_H rate_Na rate_K rate_Ca rate_Mg rate_SiO2 rate_Al rate_Cl rate_SO4 rate_HCO3 rate_H2O' # change in kg at every node / dt
fp = the_simple_fluid
temperature_unit = Celsius
[]
[AuxVariables]
[rate_H]
[]
[rate_Na]
[]
[rate_K]
[]
[rate_Ca]
[]
[rate_Mg]
[]
[rate_SiO2]
[]
[rate_Al]
[]
[rate_Cl]
[]
[rate_SO4]
[]
[rate_HCO3]
[]
[rate_H2O]
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.01
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-14 0 0 0 1E-14 0 0 0 1E-14'
[]
[thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '2.5 0 0 0 2.5 0 0 0 2.5'
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
density = 2750.0
specific_heat_capacity = 900.0
[]
[]
[Preconditioning]
active = typically_efficient
[typically_efficient]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = ' hypre boomeramg'
[]
[strong]
type = SMP
full = true
petsc_options = '-ksp_diagonal_scale -ksp_diagonal_scale_fix'
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = ' asm ilu NONZERO 2'
[]
[probably_too_strong]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu mumps'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 31536000 #1 year
[TimeStepper]
type = SolutionTimeAdaptiveDT
dt = 500
[]
[]
[Outputs]
exodus = true
csv = true
[]
[MultiApps]
[react]
type = TransientMultiApp
input_files = aquifer_geochemistry.i
clone_master_mesh = true
execute_on = 'timestep_end'
[]
[]
[Transfers]
[changes_due_to_flow]
type = MultiAppCopyTransfer
source_variable = 'rate_H rate_Na rate_K rate_Ca rate_Mg rate_SiO2 rate_Al rate_Cl rate_SO4 rate_HCO3 rate_H2O temperature'
variable = 'pf_rate_H pf_rate_Na pf_rate_K pf_rate_Ca pf_rate_Mg pf_rate_SiO2 pf_rate_Al pf_rate_Cl pf_rate_SO4 pf_rate_HCO3 pf_rate_H2O temperature'
to_multi_app = react
[]
[massfrac_from_geochem]
type = MultiAppCopyTransfer
source_variable = 'massfrac_H massfrac_Na massfrac_K massfrac_Ca massfrac_Mg massfrac_SiO2 massfrac_Al massfrac_Cl massfrac_SO4 massfrac_HCO3'
variable = 'f_H f_Na f_K f_Ca f_Mg f_SiO2 f_Al f_Cl f_SO4 f_HCO3'
from_multi_app = react
[]
[]
(modules/porous_flow/test/tests/heat_advection/except1.i)
# Exception testing: cannot use PorousFlowFullySaturatedUpwindHeatAdvection with != 1 phase
[Mesh]
type = GeneratedMesh
dim = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[temp]
[]
[]
[Kernels]
[dummy1]
type = Diffusion
variable = ppwater
[]
[dummy2]
type = Diffusion
variable = ppgas
[]
[advection]
type = PorousFlowFullySaturatedUpwindHeatAdvection
variable = temp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas temp'
number_fluid_phases = 2
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureConst
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.1 0 0 0 2 0 0 0 3'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
num_steps = 1
[]
(modules/porous_flow/test/tests/gravity/fully_saturated_upwinded_grav01c.i)
# Checking that gravity head is established
# 1phase, 2-component, constant fluid-bulk, constant viscosity, constant permeability
# fully saturated with fully-saturated Kernel with upwinding
# For better agreement with the analytical solution (ana_pp), just increase nx
# NOTE: this test is numerically delicate because the steady-state configuration is independent of the mass fraction, so the frac variable can assume any value as long as mass-fraction is conserved
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
xmin = -1
xmax = 0
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[InitialCondition]
type = RandomIC
min = 0
max = 1
[]
[]
[frac]
[InitialCondition]
type = RandomIC
min = 0
max = 1
[]
[]
[]
[Kernels]
[flux1]
type = PorousFlowFullySaturatedAdvectiveFlux
variable = pp
fluid_component = 1
gravity = '-1 0 0'
[]
[flux0]
type = PorousFlowFullySaturatedAdvectiveFlux
variable = frac
fluid_component = 0
gravity = '-1 0 0'
[]
[]
[Functions]
[ana_pp]
type = ParsedFunction
symbol_names = 'g B p0 rho0'
symbol_values = '1 1.2 0 1'
expression = '-B*log(exp(-p0/B)+g*rho0*x/B)' # expected pp at base
[]
[]
[BCs]
[z]
type = DirichletBC
variable = pp
boundary = right
value = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp frac'
number_fluid_phases = 1
number_fluid_components = 2
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.2
density0 = 1
viscosity = 1
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseFullySaturated
porepressure = pp
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = frac
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[]
[Postprocessors]
[pp_base]
type = PointValue
variable = pp
point = '-1 0 0'
[]
[pp_analytical]
type = FunctionValuePostprocessor
function = ana_pp
point = '-1 0 0'
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Steady
solve_type = Newton
nl_rel_tol = 1E-12
petsc_options_iname = '-pc_factor_shift_type'
petsc_options_value = 'NONZERO'
nl_max_its = 100
[]
[Outputs]
csv = true
[]
(modules/porous_flow/test/tests/jacobian/heat_advection01.i)
# 1phase, unsaturated, heat advection
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[temp]
[]
[pp]
[]
[]
[ICs]
[temp]
type = RandomIC
variable = temp
max = 1.0
min = 0.0
[]
[pp]
type = RandomIC
variable = pp
max = 0.0
min = -1.0
[]
[]
[Kernels]
[pp]
type = TimeDerivative
variable = pp
[]
[heat_advection]
type = PorousFlowHeatAdvection
variable = temp
gravity = '1 2 3'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.6
alpha = 1.3
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 1.1
thermal_expansion = 0
viscosity = 1
cv = 1.1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[PS]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/dirackernels/theis2.i)
# Theis problem: Flow to single sink
# Constant rate injection between 200 and 1000 s.
# Cartesian mesh with logarithmic distribution in x and y.
[Mesh]
type = GeneratedMesh
dim = 2
nx = 20
ny = 20
bias_x = 1.1
bias_y = 1.1
ymax = 100
xmax = 100
# To get consistent ordering of results with distributed meshes
allow_renumbering = false
[]
[GlobalParams]
PorousFlowDictator = dictator
compute_enthalpy = false
compute_internal_energy = false
[]
[Variables]
[pp]
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = pp
gravity = '0 0 0'
fluid_component = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
viscosity = 0.001
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-14 0 0 0 1E-14 0 0 0 1E-14'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0
phase = 0
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 200
end_time = 1000
nl_abs_tol = 1e-10
[]
[Outputs]
perf_graph = true
file_base = theis2
[csv]
type = CSV
execute_on = final
[]
[]
[ICs]
[PressureIC]
variable = pp
type = ConstantIC
value = 20e6
[]
[]
[DiracKernels]
[sink]
type = PorousFlowSquarePulsePointSource
start_time = 200
end_time = 1000
point = '0 0 0'
mass_flux = -0.04
variable = pp
[]
[]
[BCs]
[right]
type = DirichletBC
variable = pp
value = 20e6
boundary = right
[]
[top]
type = DirichletBC
variable = pp
value = 20e6
boundary = top
[]
[]
[VectorPostprocessors]
[pressure]
type = SideValueSampler
variable = pp
sort_by = x
execute_on = timestep_end
boundary = bottom
[]
[]
(modules/porous_flow/test/tests/aux_kernels/darcy_velocity_lower_except.i)
# Exception testing for PorousFlowDarcyVelocityComponentLowerDimensional
# Checking that an error is produced if the AuxVariable is not defined only on
# lower-dimensional elements
[Mesh]
type = FileMesh
file = fractured_block.e
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '1 0.5 0.2'
[]
[Variables]
[pp]
[]
[]
[Kernels]
[dummy]
type = TimeDerivative
variable = pp
[]
[]
[AuxVariables]
[fracture_vel_x]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[fracture_vel_x]
type = PorousFlowDarcyVelocityComponentLowerDimensional
variable = fracture_vel_x
component = x
fluid_phase = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1E16
viscosity = 10
density0 = 2
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '5 0 0 0 5 0 0 0 5'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[Executioner]
type = Transient
dt = 1
end_time = 1
[]
(modules/porous_flow/test/tests/fluidstate/brineco2_hightemp.i)
# Tests correct calculation of properties in PorousFlowBrineCO2 in the elevated
# temperature regime (T > 110C)
[Mesh]
type = GeneratedMesh
dim = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
temperature = 250
[]
[Variables]
[pgas]
initial_condition = 20e6
[]
[z]
initial_condition = 0.2
[]
[]
[AuxVariables]
[xnacl]
initial_condition = 0.1
[]
[pressure_gas]
order = CONSTANT
family = MONOMIAL
[]
[pressure_water]
order = CONSTANT
family = MONOMIAL
[]
[saturation_gas]
order = CONSTANT
family = MONOMIAL
[]
[saturation_water]
order = CONSTANT
family = MONOMIAL
[]
[density_water]
order = CONSTANT
family = MONOMIAL
[]
[density_gas]
order = CONSTANT
family = MONOMIAL
[]
[viscosity_water]
order = CONSTANT
family = MONOMIAL
[]
[viscosity_gas]
order = CONSTANT
family = MONOMIAL
[]
[x0_water]
order = CONSTANT
family = MONOMIAL
[]
[x0_gas]
order = CONSTANT
family = MONOMIAL
[]
[x1_water]
order = CONSTANT
family = MONOMIAL
[]
[x1_gas]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[pressure_water]
type = PorousFlowPropertyAux
variable = pressure_water
property = pressure
phase = 0
execute_on = timestep_end
[]
[pressure_gas]
type = PorousFlowPropertyAux
variable = pressure_gas
property = pressure
phase = 1
execute_on = timestep_end
[]
[saturation_water]
type = PorousFlowPropertyAux
variable = saturation_water
property = saturation
phase = 0
execute_on = timestep_end
[]
[saturation_gas]
type = PorousFlowPropertyAux
variable = saturation_gas
property = saturation
phase = 1
execute_on = timestep_end
[]
[density_water]
type = PorousFlowPropertyAux
variable = density_water
property = density
phase = 0
execute_on = timestep_end
[]
[density_gas]
type = PorousFlowPropertyAux
variable = density_gas
property = density
phase = 1
execute_on = timestep_end
[]
[viscosity_water]
type = PorousFlowPropertyAux
variable = viscosity_water
property = viscosity
phase = 0
execute_on = timestep_end
[]
[viscosity_gas]
type = PorousFlowPropertyAux
variable = viscosity_gas
property = viscosity
phase = 1
execute_on = timestep_end
[]
[x1_water]
type = PorousFlowPropertyAux
variable = x1_water
property = mass_fraction
phase = 0
fluid_component = 1
execute_on = timestep_end
[]
[x1_gas]
type = PorousFlowPropertyAux
variable = x1_gas
property = mass_fraction
phase = 1
fluid_component = 1
execute_on = timestep_end
[]
[x0_water]
type = PorousFlowPropertyAux
variable = x0_water
property = mass_fraction
phase = 0
fluid_component = 0
execute_on = timestep_end
[]
[x0_gas]
type = PorousFlowPropertyAux
variable = x0_gas
property = mass_fraction
phase = 1
fluid_component = 0
execute_on = timestep_end
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pgas
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = z
fluid_component = 1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas z'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[fs]
type = PorousFlowBrineCO2
brine_fp = brine
co2_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[brine]
type = BrineFluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[brineco2]
type = PorousFlowFluidState
gas_porepressure = pgas
z = z
temperature_unit = Celsius
xnacl = xnacl
capillary_pressure = pc
fluid_state = fs
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
[density_water]
type = ElementIntegralVariablePostprocessor
variable = density_water
[]
[density_gas]
type = ElementIntegralVariablePostprocessor
variable = density_gas
[]
[viscosity_water]
type = ElementIntegralVariablePostprocessor
variable = viscosity_water
[]
[viscosity_gas]
type = ElementIntegralVariablePostprocessor
variable = viscosity_gas
[]
[x1_water]
type = ElementIntegralVariablePostprocessor
variable = x1_water
[]
[x0_water]
type = ElementIntegralVariablePostprocessor
variable = x0_water
[]
[x1_gas]
type = ElementIntegralVariablePostprocessor
variable = x1_gas
[]
[x0_gas]
type = ElementIntegralVariablePostprocessor
variable = x0_gas
[]
[sg]
type = ElementIntegralVariablePostprocessor
variable = saturation_gas
[]
[sw]
type = ElementIntegralVariablePostprocessor
variable = saturation_water
[]
[pwater]
type = ElementIntegralVariablePostprocessor
variable = pressure_water
[]
[pgas]
type = ElementIntegralVariablePostprocessor
variable = pressure_gas
[]
[x0mass]
type = PorousFlowFluidMass
fluid_component = 0
phase = '0 1'
[]
[x1mass]
type = PorousFlowFluidMass
fluid_component = 1
phase = '0 1'
[]
[]
[Outputs]
csv = true
execute_on = 'TIMESTEP_END'
perf_graph = false
[]
(modules/porous_flow/test/tests/actions/block_restricted_materials.i)
# Tests that the actions to automatically add PorousFlowJoiner's and the correct
# qp or nodal version of each material work as expected when a material is block
# restricted. Tests both phase dependent properties (like relative permeability)
# as well as phase-independent materials (like porosity)
[GlobalParams]
PorousFlowDictator = dictator
[]
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
ny = 2
[]
[subdomain0]
input = gen
type = SubdomainBoundingBoxGenerator
bottom_left = '0 0 0'
top_right = '1 0.5 0'
block_id = 0
[]
[subdomain1]
input = subdomain0
type = SubdomainBoundingBoxGenerator
bottom_left = '0 0.5 0'
top_right = '1 1 0'
block_id = 1
[]
[]
[Variables]
[p0]
initial_condition = 1
[]
[p1]
initial_condition = 1.1
[]
[]
[AuxVariables]
[porosity]
family = MONOMIAL
order = CONSTANT
[]
[kl]
family = MONOMIAL
order = CONSTANT
[]
[kg]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[porosity]
type = PorousFlowPropertyAux
property = porosity
variable = porosity
[]
[kl]
type = PorousFlowPropertyAux
property = relperm
variable = kl
phase = 0
[]
[kg]
type = PorousFlowPropertyAux
property = relperm
variable = kg
phase = 1
[]
[]
[Kernels]
[p0]
type = PorousFlowMassTimeDerivative
variable = p0
[]
[p1]
type = PorousFlowAdvectiveFlux
gravity = '0 0 0'
variable = p1
[]
[]
[FluidProperties]
[fluid0]
type = SimpleFluidProperties
[]
[fluid1]
type = SimpleFluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = p0
phase1_porepressure = p1
capillary_pressure = pc
[]
[krl0]
type = PorousFlowRelativePermeabilityConst
kr = 0.7
phase = 0
block = 0
[]
[krg0]
type = PorousFlowRelativePermeabilityConst
kr = 0.8
phase = 1
block = 0
[]
[krl1]
type = PorousFlowRelativePermeabilityConst
kr = 0.5
phase = 0
block = 1
[]
[krg1]
type = PorousFlowRelativePermeabilityConst
kr = 0.4
phase = 1
block = 1
[]
[perm]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 1 0 0 0 1'
[]
[fluid0]
type = PorousFlowSingleComponentFluid
fp = fluid0
phase = 0
[]
[fluid1]
type = PorousFlowSingleComponentFluid
fp = fluid1
phase = 1
[]
[massfrac]
type = PorousFlowMassFraction
[]
[porosity0]
type = PorousFlowPorosityConst
porosity = 0.1
block = 0
[]
[porosity1]
type = PorousFlowPorosityConst
porosity = 0.2
block = 1
[]
[]
[Executioner]
type = Transient
end_time = 1
nl_abs_tol = 1e-10
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'p0 p1'
number_fluid_phases = 2
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[]
[Outputs]
exodus = true
[]
(modules/porous_flow/test/tests/jacobian/fflux15.i)
# 1phase, 2components (water and tracer using BrineFluidProperties with constant salinity),
# constant insitu permeability and relative perm, nonzero gravity
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 2
nx = 1
xmin = 0
xmax = 10
ny = 1
ymin = 0
ymax = 10
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 -10 0'
[]
[Variables]
[pp]
[]
[tracer]
[]
[]
[ICs]
[pp]
type = RandomIC
variable = pp
min = 1e6
max = 2e6
[]
[tracer]
type = RandomIC
variable = tracer
min = 0.1
max = 0.2
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pp
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = tracer
fluid_component = 1
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = tracer
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp tracer'
number_fluid_phases = 1
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[]
[FluidProperties]
[brine]
type = BrineFluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'tracer'
[]
[brine]
type = PorousFlowBrine
phase = 0
xnacl = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-14 0 0 0 2e-14 0 0 0 3e-14'
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[relperm]
type = PorousFlowRelativePermeabilityConst
kr = 1
phase = 0
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/examples/coal_mining/coarse_with_fluid.i)
# Strata deformation and fluid flow aaround a coal mine - 3D model
#
# A "half model" is used. The mine is 400m deep and
# just the roof is studied (-400<=z<=0). The mining panel
# sits between 0<=x<=150, and 0<=y<=1000, so this simulates
# a coal panel that is 300m wide and 1000m long. The outer boundaries
# are 1km from the excavation boundaries.
#
# The excavation takes 0.5 years.
#
# The boundary conditions for this simulation are:
# - disp_x = 0 at x=0 and x=1150
# - disp_y = 0 at y=-1000 and y=1000
# - disp_z = 0 at z=-400, but there is a time-dependent
# Young modulus that simulates excavation
# - wc_x = 0 at y=-1000 and y=1000
# - wc_y = 0 at x=0 and x=1150
# - no flow at x=0, z=-400 and z=0
# - fixed porepressure at y=-1000, y=1000 and x=1150
# That is, rollers on the sides, free at top,
# and prescribed at bottom in the unexcavated portion.
#
# A single-phase unsaturated fluid is used.
#
# The small strain formulation is used.
#
# All stresses are measured in MPa, and time units are measured in years.
#
# The initial porepressure is hydrostatic with P=0 at z=0, so
# Porepressure ~ - 0.01*z MPa, where the fluid has density 1E3 kg/m^3 and
# gravity = = 10 m.s^-2 = 1E-5 MPa m^2/kg.
# To be more accurate, i use
# Porepressure = -bulk * log(1 + g*rho0*z/bulk)
# where bulk=2E3 MPa and rho0=1Ee kg/m^3.
# The initial stress is consistent with the weight force from undrained
# density 2500 kg/m^3, and fluid porepressure, and a Biot coefficient of 0.7, ie,
# stress_zz^effective = 0.025*z + 0.7 * initial_porepressure
# The maximum and minimum principal horizontal effective stresses are
# assumed to be equal to 0.8*stress_zz.
#
# Material properties:
# Young's modulus = 8 GPa
# Poisson's ratio = 0.25
# Cosserat layer thickness = 1 m
# Cosserat-joint normal stiffness = large
# Cosserat-joint shear stiffness = 1 GPa
# MC cohesion = 2 MPa
# MC friction angle = 35 deg
# MC dilation angle = 8 deg
# MC tensile strength = 1 MPa
# MC compressive strength = 100 MPa
# WeakPlane cohesion = 0.1 MPa
# WeakPlane friction angle = 30 deg
# WeakPlane dilation angle = 10 deg
# WeakPlane tensile strength = 0.1 MPa
# WeakPlane compressive strength = 100 MPa softening to 1 MPa at strain = 1
# Fluid density at zero porepressure = 1E3 kg/m^3
# Fluid bulk modulus = 2E3 MPa
# Fluid viscosity = 1.1E-3 Pa.s = 1.1E-9 MPa.s = 3.5E-17 MPa.year
#
[GlobalParams]
perform_finite_strain_rotations = false
displacements = 'disp_x disp_y disp_z'
Cosserat_rotations = 'wc_x wc_y wc_z'
PorousFlowDictator = dictator
biot_coefficient = 0.7
[]
[Mesh]
[file]
type = FileMeshGenerator
file = mesh/coarse.e
[]
[xmin]
type = SideSetsAroundSubdomainGenerator
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16'
new_boundary = xmin
normal = '-1 0 0'
input = file
[]
[xmax]
type = SideSetsAroundSubdomainGenerator
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16'
new_boundary = xmax
normal = '1 0 0'
input = xmin
[]
[ymin]
type = SideSetsAroundSubdomainGenerator
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16'
new_boundary = ymin
normal = '0 -1 0'
input = xmax
[]
[ymax]
type = SideSetsAroundSubdomainGenerator
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16'
new_boundary = ymax
normal = '0 1 0'
input = ymin
[]
[zmax]
type = SideSetsAroundSubdomainGenerator
block = 16
new_boundary = zmax
normal = '0 0 1'
input = ymax
[]
[zmin]
type = SideSetsAroundSubdomainGenerator
block = 2
new_boundary = zmin
normal = '0 0 -1'
input = zmax
[]
[excav]
type = SubdomainBoundingBoxGenerator
input = zmin
block_id = 1
bottom_left = '0 0 -400'
top_right = '150 1000 -397'
[]
[roof]
type = SideSetsBetweenSubdomainsGenerator
primary_block = 3
paired_block = 1
input = excav
new_boundary = roof
[]
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[wc_x]
[]
[wc_y]
[]
[porepressure]
scaling = 1E-5
[]
[]
[ICs]
[porepressure]
type = FunctionIC
variable = porepressure
function = ini_pp
[]
[]
[Kernels]
[cx_elastic]
type = CosseratStressDivergenceTensors
use_displaced_mesh = false
variable = disp_x
component = 0
[]
[cy_elastic]
type = CosseratStressDivergenceTensors
use_displaced_mesh = false
variable = disp_y
component = 1
[]
[cz_elastic]
type = CosseratStressDivergenceTensors
use_displaced_mesh = false
variable = disp_z
component = 2
[]
[x_couple]
type = StressDivergenceTensors
use_displaced_mesh = false
variable = wc_x
displacements = 'wc_x wc_y wc_z'
component = 0
base_name = couple
[]
[y_couple]
type = StressDivergenceTensors
use_displaced_mesh = false
variable = wc_y
displacements = 'wc_x wc_y wc_z'
component = 1
base_name = couple
[]
[x_moment]
type = MomentBalancing
use_displaced_mesh = false
variable = wc_x
component = 0
[]
[y_moment]
type = MomentBalancing
use_displaced_mesh = false
variable = wc_y
component = 1
[]
[gravity]
type = Gravity
use_displaced_mesh = false
variable = disp_z
value = -10E-6 # remember this is in MPa
[]
[poro_x]
type = PorousFlowEffectiveStressCoupling
use_displaced_mesh = false
variable = disp_x
component = 0
[]
[poro_y]
type = PorousFlowEffectiveStressCoupling
use_displaced_mesh = false
variable = disp_y
component = 1
[]
[poro_z]
type = PorousFlowEffectiveStressCoupling
use_displaced_mesh = false
component = 2
variable = disp_z
[]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = porepressure
[]
[flux]
type = PorousFlowAdvectiveFlux
use_displaced_mesh = false
variable = porepressure
gravity = '0 0 -10E-6'
fluid_component = 0
[]
[poro_vol_exp]
type = PorousFlowMassVolumetricExpansion
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16'
variable = porepressure
fluid_component = 0
[]
[]
[AuxVariables]
[saturation]
order = CONSTANT
family = MONOMIAL
[]
[darcy_x]
order = CONSTANT
family = MONOMIAL
[]
[darcy_y]
order = CONSTANT
family = MONOMIAL
[]
[darcy_z]
order = CONSTANT
family = MONOMIAL
[]
[porosity]
order = CONSTANT
family = MONOMIAL
[]
[wc_z]
[]
[stress_xx]
order = CONSTANT
family = MONOMIAL
[]
[stress_xy]
order = CONSTANT
family = MONOMIAL
[]
[stress_xz]
order = CONSTANT
family = MONOMIAL
[]
[stress_yx]
order = CONSTANT
family = MONOMIAL
[]
[stress_yy]
order = CONSTANT
family = MONOMIAL
[]
[stress_yz]
order = CONSTANT
family = MONOMIAL
[]
[stress_zx]
order = CONSTANT
family = MONOMIAL
[]
[stress_zy]
order = CONSTANT
family = MONOMIAL
[]
[stress_zz]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_xx]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_xy]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_xz]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_yx]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_yy]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_yz]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_zx]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_zy]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_zz]
order = CONSTANT
family = MONOMIAL
[]
[perm_xx]
order = CONSTANT
family = MONOMIAL
[]
[perm_yy]
order = CONSTANT
family = MONOMIAL
[]
[perm_zz]
order = CONSTANT
family = MONOMIAL
[]
[mc_shear]
order = CONSTANT
family = MONOMIAL
[]
[mc_tensile]
order = CONSTANT
family = MONOMIAL
[]
[wp_shear]
order = CONSTANT
family = MONOMIAL
[]
[wp_tensile]
order = CONSTANT
family = MONOMIAL
[]
[wp_shear_f]
order = CONSTANT
family = MONOMIAL
[]
[wp_tensile_f]
order = CONSTANT
family = MONOMIAL
[]
[mc_shear_f]
order = CONSTANT
family = MONOMIAL
[]
[mc_tensile_f]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[saturation_water]
type = PorousFlowPropertyAux
variable = saturation
property = saturation
phase = 0
execute_on = timestep_end
[]
[darcy_x]
type = PorousFlowDarcyVelocityComponent
variable = darcy_x
gravity = '0 0 -10E-6'
component = x
[]
[darcy_y]
type = PorousFlowDarcyVelocityComponent
variable = darcy_y
gravity = '0 0 -10E-6'
component = y
[]
[darcy_z]
type = PorousFlowDarcyVelocityComponent
variable = darcy_z
gravity = '0 0 -10E-6'
component = z
[]
[porosity]
type = PorousFlowPropertyAux
property = porosity
variable = porosity
execute_on = timestep_end
[]
[stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[]
[stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[]
[stress_xz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xz
index_i = 0
index_j = 2
execute_on = timestep_end
[]
[stress_yx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yx
index_i = 1
index_j = 0
execute_on = timestep_end
[]
[stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[]
[stress_yz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yz
index_i = 1
index_j = 2
execute_on = timestep_end
[]
[stress_zx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zx
index_i = 2
index_j = 0
execute_on = timestep_end
[]
[stress_zy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zy
index_i = 2
index_j = 1
execute_on = timestep_end
[]
[stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[]
[total_strain_xx]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[]
[total_strain_xy]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[]
[total_strain_xz]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_xz
index_i = 0
index_j = 2
execute_on = timestep_end
[]
[total_strain_yx]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_yx
index_i = 1
index_j = 0
execute_on = timestep_end
[]
[total_strain_yy]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[]
[total_strain_yz]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_yz
index_i = 1
index_j = 2
execute_on = timestep_end
[]
[total_strain_zx]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_zx
index_i = 2
index_j = 0
execute_on = timestep_end
[]
[total_strain_zy]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_zy
index_i = 2
index_j = 1
execute_on = timestep_end
[]
[total_strain_zz]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[]
[perm_xx]
type = PorousFlowPropertyAux
property = permeability
variable = perm_xx
row = 0
column = 0
execute_on = timestep_end
[]
[perm_yy]
type = PorousFlowPropertyAux
property = permeability
variable = perm_yy
row = 1
column = 1
execute_on = timestep_end
[]
[perm_zz]
type = PorousFlowPropertyAux
property = permeability
variable = perm_zz
row = 2
column = 2
execute_on = timestep_end
[]
[mc_shear]
type = MaterialStdVectorAux
index = 0
property = mc_plastic_internal_parameter
variable = mc_shear
execute_on = timestep_end
[]
[mc_tensile]
type = MaterialStdVectorAux
index = 1
property = mc_plastic_internal_parameter
variable = mc_tensile
execute_on = timestep_end
[]
[wp_shear]
type = MaterialStdVectorAux
index = 0
property = wp_plastic_internal_parameter
variable = wp_shear
execute_on = timestep_end
[]
[wp_tensile]
type = MaterialStdVectorAux
index = 1
property = wp_plastic_internal_parameter
variable = wp_tensile
execute_on = timestep_end
[]
[mc_shear_f]
type = MaterialStdVectorAux
index = 6
property = mc_plastic_yield_function
variable = mc_shear_f
execute_on = timestep_end
[]
[mc_tensile_f]
type = MaterialStdVectorAux
index = 0
property = mc_plastic_yield_function
variable = mc_tensile_f
execute_on = timestep_end
[]
[wp_shear_f]
type = MaterialStdVectorAux
index = 0
property = wp_plastic_yield_function
variable = wp_shear_f
execute_on = timestep_end
[]
[wp_tensile_f]
type = MaterialStdVectorAux
index = 1
property = wp_plastic_yield_function
variable = wp_tensile_f
execute_on = timestep_end
[]
[]
[BCs]
[no_x]
type = DirichletBC
variable = disp_x
boundary = 'xmin xmax'
value = 0.0
[]
[no_y]
type = DirichletBC
variable = disp_y
boundary = 'ymin ymax'
value = 0.0
[]
[no_z]
type = DirichletBC
variable = disp_z
boundary = zmin
value = 0.0
[]
[no_wc_x]
type = DirichletBC
variable = wc_x
boundary = 'ymin ymax'
value = 0.0
[]
[no_wc_y]
type = DirichletBC
variable = wc_y
boundary = 'xmin xmax'
value = 0.0
[]
[fix_porepressure]
type = FunctionDirichletBC
variable = porepressure
boundary = 'ymin ymax xmax'
function = ini_pp
[]
[roof_porepressure]
type = PorousFlowPiecewiseLinearSink
variable = porepressure
pt_vals = '-1E3 1E3'
multipliers = '-1 1'
fluid_phase = 0
flux_function = roof_conductance
boundary = roof
[]
[roof_bcs]
type = StickyBC
variable = disp_z
min_value = -3.0
boundary = roof
[]
[]
[Functions]
[ini_pp]
type = ParsedFunction
symbol_names = 'bulk p0 g rho0'
symbol_values = '2E3 0.0 1E-5 1E3'
expression = '-bulk*log(exp(-p0/bulk)+g*rho0*z/bulk)'
[]
[ini_xx]
type = ParsedFunction
symbol_names = 'bulk p0 g rho0 biot'
symbol_values = '2E3 0.0 1E-5 1E3 0.7'
expression = '0.8*(2500*10E-6*z+biot*(-bulk*log(exp(-p0/bulk)+g*rho0*z/bulk)))'
[]
[ini_zz]
type = ParsedFunction
symbol_names = 'bulk p0 g rho0 biot'
symbol_values = '2E3 0.0 1E-5 1E3 0.7'
expression = '2500*10E-6*z+biot*(-bulk*log(exp(-p0/bulk)+g*rho0*z/bulk))'
[]
[excav_sideways]
type = ParsedFunction
symbol_names = 'end_t ymin ymax minval maxval slope'
symbol_values = '0.5 0 1000.0 1E-9 1 60'
# excavation face at ymin+(ymax-ymin)*min(t/end_t,1)
# slope is the distance over which the modulus reduces from maxval to minval
expression = 'if(y<ymin+(ymax-ymin)*min(t/end_t,1),minval,if(y<ymin+(ymax-ymin)*min(t/end_t,1)+slope,minval+(maxval-minval)*(y-(ymin+(ymax-ymin)*min(t/end_t,1)))/slope,maxval))'
[]
[density_sideways]
type = ParsedFunction
symbol_names = 'end_t ymin ymax minval maxval'
symbol_values = '0.5 0 1000.0 0 2500'
expression = 'if(y<ymin+(ymax-ymin)*min(t/end_t,1),minval,maxval)'
[]
[roof_conductance]
type = ParsedFunction
symbol_names = 'end_t ymin ymax maxval minval'
symbol_values = '0.5 0 1000.0 1E7 0'
expression = 'if(y<ymin+(ymax-ymin)*min(t/end_t,1),maxval,minval)'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure disp_x disp_y disp_z'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1 # MPa^-1
[]
[mc_coh_strong_harden]
type = TensorMechanicsHardeningExponential
value_0 = 1.99 # MPa
value_residual = 2.01 # MPa
rate = 1.0
[]
[mc_fric]
type = TensorMechanicsHardeningConstant
value = 0.61 # 35deg
[]
[mc_dil]
type = TensorMechanicsHardeningConstant
value = 0.15 # 8deg
[]
[mc_tensile_str_strong_harden]
type = TensorMechanicsHardeningExponential
value_0 = 1.0 # MPa
value_residual = 1.0 # MPa
rate = 1.0
[]
[mc_compressive_str]
type = TensorMechanicsHardeningCubic
value_0 = 100 # Large!
value_residual = 100
internal_limit = 0.1
[]
[wp_coh_harden]
type = TensorMechanicsHardeningCubic
value_0 = 0.05
value_residual = 0.05
internal_limit = 10
[]
[wp_tan_fric]
type = TensorMechanicsHardeningConstant
value = 0.26 # 15deg
[]
[wp_tan_dil]
type = TensorMechanicsHardeningConstant
value = 0.18 # 10deg
[]
[wp_tensile_str_harden]
type = TensorMechanicsHardeningCubic
value_0 = 0.05
value_residual = 0.05
internal_limit = 10
[]
[wp_compressive_str_soften]
type = TensorMechanicsHardeningCubic
value_0 = 100
value_residual = 1
internal_limit = 1.0
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2E3
density0 = 1000
thermal_expansion = 0
viscosity = 3.5E-17
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = porepressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity_bulk]
type = PorousFlowPorosity
fluid = true
mechanical = true
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16'
ensure_positive = true
porosity_zero = 0.02
solid_bulk = 5.3333E3
[]
[porosity_excav]
type = PorousFlowPorosityConst
block = 1
porosity = 1.0
[]
[permeability_bulk]
type = PorousFlowPermeabilityKozenyCarman
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16'
poroperm_function = kozeny_carman_phi0
k0 = 1E-15
phi0 = 0.02
n = 2
m = 2
[]
[permeability_excav]
type = PorousFlowPermeabilityConst
block = 1
permeability = '0 0 0 0 0 0 0 0 0'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 4
s_res = 0.4
sum_s_res = 0.4
phase = 0
[]
[elasticity_tensor_0]
type = ComputeLayeredCosseratElasticityTensor
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16'
young = 8E3 # MPa
poisson = 0.25
layer_thickness = 1.0
joint_normal_stiffness = 1E9 # huge
joint_shear_stiffness = 1E3 # MPa
[]
[elasticity_tensor_1]
type = ComputeLayeredCosseratElasticityTensor
block = 1
young = 8E3 # MPa
poisson = 0.25
layer_thickness = 1.0
joint_normal_stiffness = 1E9 # huge
joint_shear_stiffness = 1E3 # MPa
elasticity_tensor_prefactor = excav_sideways
[]
[strain]
type = ComputeCosseratIncrementalSmallStrain
eigenstrain_names = ini_stress
[]
[ini_stress]
type = ComputeEigenstrainFromInitialStress
eigenstrain_name = ini_stress
initial_stress = 'ini_xx 0 0 0 ini_xx 0 0 0 ini_zz'
[]
[stress_0]
type = ComputeMultipleInelasticCosseratStress
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16'
inelastic_models = 'mc wp'
cycle_models = true
relative_tolerance = 2.0
absolute_tolerance = 1E6
max_iterations = 1
tangent_operator = nonlinear
perform_finite_strain_rotations = false
[]
[stress_1]
type = ComputeMultipleInelasticCosseratStress
block = 1
inelastic_models = ''
relative_tolerance = 2.0
absolute_tolerance = 1E6
max_iterations = 1
tangent_operator = nonlinear
perform_finite_strain_rotations = false
[]
[mc]
type = CappedMohrCoulombCosseratStressUpdate
warn_about_precision_loss = false
host_youngs_modulus = 8E3
host_poissons_ratio = 0.25
base_name = mc
tensile_strength = mc_tensile_str_strong_harden
compressive_strength = mc_compressive_str
cohesion = mc_coh_strong_harden
friction_angle = mc_fric
dilation_angle = mc_dil
max_NR_iterations = 100000
smoothing_tol = 0.1 # MPa # Must be linked to cohesion
yield_function_tol = 1E-9 # MPa. this is essentially the lowest possible without lots of precision loss
perfect_guess = true
min_step_size = 1.0
[]
[wp]
type = CappedWeakPlaneCosseratStressUpdate
warn_about_precision_loss = false
base_name = wp
cohesion = wp_coh_harden
tan_friction_angle = wp_tan_fric
tan_dilation_angle = wp_tan_dil
tensile_strength = wp_tensile_str_harden
compressive_strength = wp_compressive_str_soften
max_NR_iterations = 10000
tip_smoother = 0.05
smoothing_tol = 0.05 # MPa # Note, this must be tied to cohesion, otherwise get no possible return at cone apex
yield_function_tol = 1E-11 # MPa. this is essentially the lowest possible without lots of precision loss
perfect_guess = true
min_step_size = 1.0E-3
[]
[undrained_density_0]
type = GenericConstantMaterial
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16'
prop_names = density
prop_values = 2500
[]
[undrained_density_1]
type = GenericFunctionMaterial
block = 1
prop_names = density
prop_values = density_sideways
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Postprocessors]
[min_roof_disp]
type = NodalExtremeValue
boundary = roof
value_type = min
variable = disp_z
[]
[min_roof_pp]
type = NodalExtremeValue
boundary = roof
value_type = min
variable = porepressure
[]
[min_surface_disp]
type = NodalExtremeValue
boundary = zmax
value_type = min
variable = disp_z
[]
[min_surface_pp]
type = NodalExtremeValue
boundary = zmax
value_type = min
variable = porepressure
[]
[max_perm_zz]
type = ElementExtremeValue
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16'
variable = perm_zz
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options = '-snes_converged_reason'
# best overall
# petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
# petsc_options_value = ' lu mumps'
# best if you do not have mumps:
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu superlu_dist'
# best if you do not have mumps or superlu_dist:
#petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
#petsc_options_value = ' asm 2 lu gmres 200'
# very basic:
#petsc_options_iname = '-pc_type -ksp_type -ksp_gmres_restart'
#petsc_options_value = ' bjacobi gmres 200'
line_search = bt
nl_abs_tol = 1e-3
nl_rel_tol = 1e-5
l_max_its = 200
nl_max_its = 30
start_time = 0.0
dt = 0.014706
end_time = 0.014706 #0.5
[]
[Outputs]
time_step_interval = 1
print_linear_residuals = true
exodus = true
csv = true
console = true
[]
(modules/porous_flow/test/tests/dirackernels/injection_with_plasticity.i)
# Example: Injection into a uniform aquifer 10 x 10 x 5 km
# Drucker-Prager deformation
# Darcy flow
gravity = -9.81
solid_density = 2350
fluid_density = 1000
porosity0 = 0.1
[Mesh]
type = GeneratedMesh
dim = 3
xmin = 0
xmax = 1e4
ymin = 0
ymax = 1e4
zmax = 0
zmin = -5e3
nx = 2
ny = 2
nz = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 ${gravity}'
displacements = 'disp_x disp_y disp_z'
strain_at_nearest_qp = true
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
thermal_expansion = 0 # Not doing a thermal simulation
bulk_modulus = 2E9
density0 = ${fluid_density}
viscosity = 5E-4
[]
[]
[PorousFlowFullySaturated]
coupling_type = HydroMechanical
porepressure = pp
dictator_name = dictator
fp = simple_fluid
add_darcy_aux = false
add_stress_aux = false
stabilization = none
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[pp]
scaling = 1E6
[InitialCondition]
type = FunctionIC
function = ini_pp
[]
[]
[]
[Functions]
[ini_stress]
type = ParsedFunction
expression = '-${gravity} * z * (${solid_density} - ${fluid_density}) * (1.0 - ${porosity0})' # initial effective stress that should result from weight force
[]
[ini_pp]
type = ParsedFunction
expression = '${gravity} * z * ${fluid_density} + 1E5'
[]
[]
[BCs]
[p_top]
type = FunctionDirichletBC
variable = pp
boundary = front
function = ini_pp
[]
[x_roller]
type = DirichletBC
variable = disp_x
boundary = 'left right'
value = 0
[]
[y_roller]
type = DirichletBC
variable = disp_y
boundary = 'top bottom'
value = 0
[]
[z_confined]
type = DirichletBC
variable = disp_z
boundary = 'back front'
value = 0
[]
[]
[UserObjects]
[pls_total_outflow_mass]
type = PorousFlowSumQuantity
[]
# Cohesion
[mc_coh]
type = TensorMechanicsHardeningConstant
value = 6.0E6
[]
# Friction angle
[mc_phi]
type = TensorMechanicsHardeningConstant
value = 35.0
convert_to_radians = true
[]
# Dilation angle
[mc_psi]
type = TensorMechanicsHardeningConstant
value = 2
convert_to_radians = true
[]
# Drucker-Prager objects
[dp]
type = TensorMechanicsPlasticDruckerPragerHyperbolic
mc_cohesion = mc_coh
mc_friction_angle = mc_phi
mc_dilation_angle = mc_psi
yield_function_tolerance = 1E-3
internal_constraint_tolerance = 1E-6
[]
# Tensile strength
[tens]
type = TensorMechanicsHardeningConstant
value = 3.0E6
[]
# Compressive strength (cap on yield envelope)
[compr_all]
type = TensorMechanicsHardeningConstant
value = 1E10
[]
[]
[Materials]
[strain]
type = ComputeIncrementalStrain
eigenstrain_names = eigenstrain_all
[]
[eigenstrain_all]
type = ComputeEigenstrainFromInitialStress
initial_stress = 'ini_stress 0 0 0 ini_stress 0 0 0 ini_stress'
eigenstrain_name = eigenstrain_all
[]
[elasticity_tensor]
type = ComputeIsotropicElasticityTensor
bulk_modulus = 3.3333E9
shear_modulus = 2.5E9
[]
[dp_mat]
type = CappedDruckerPragerStressUpdate
DP_model = dp
tensile_strength = tens
compressive_strength = compr_all
smoothing_tol = 1E5
yield_function_tol = 1E-3
tip_smoother = 0
[]
[stress]
type = ComputeMultipleInelasticStress
inelastic_models = dp_mat
[]
# Permeability
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-13 0 0 0 1E-13 0 0 0 1E-13'
[]
# Porosity
[porosity]
type = PorousFlowPorosity
porosity_zero = ${porosity0}
biot_coefficient = 1.0
solid_bulk = 1.0 # Required but irrelevant when biot_coefficient is unity
mechanical = true
fluid = true
[]
# Density of saturated rock
[density]
type = PorousFlowTotalGravitationalDensityFullySaturatedFromPorosity
rho_s = ${solid_density}
[]
[]
[DiracKernels]
[pls]
type = PorousFlowPolyLineSink
variable = pp
SumQuantityUO = pls_total_outflow_mass
point_file = two_nodes.bh
function_of = pressure
fluid_phase = 0
p_or_t_vals = '0 1E7'
fluxes = '-1.59 -1.59'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
[]
[]
[Executioner]
solve_type = Newton
type = Transient
dt = 1E6
end_time = 1E6
nl_rel_tol = 1E-7
[]
[Outputs]
exodus = true
[]
(modules/porous_flow/test/tests/jacobian/brineco2_twophase.i)
# Tests correct calculation of properties derivatives in PorousFlowFluidState
# for conditions that are appropriate for two phases
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[AuxVariables]
[xnacl]
initial_condition = 0.05
[]
[]
[Variables]
[pgas]
[]
[zi]
[]
[]
[ICs]
[pgas]
type = RandomIC
min = 1e6
max = 4e6
variable = pgas
seed = 1
[]
[z]
type = RandomIC
min = 0.2
max = 0.8
variable = zi
seed = 2
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pgas
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = zi
fluid_component = 1
[]
[adv0]
type = PorousFlowAdvectiveFlux
variable = pgas
fluid_component = 0
[]
[adv1]
type = PorousFlowAdvectiveFlux
variable = zi
fluid_component = 1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas zi'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e1
pc_max = 1e4
[]
[fs]
type = PorousFlowBrineCO2
brine_fp = brine
co2_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[brine]
type = BrineFluidProperties
[]
[water]
type = Water97FluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 50
[]
[brineco2]
type = PorousFlowFluidState
gas_porepressure = pgas
z = zi
temperature_unit = Celsius
xnacl = xnacl
capillary_pressure = pc
fluid_state = fs
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[AuxVariables]
[sgas]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[sgas]
type = PorousFlowPropertyAux
property = saturation
phase = 1
variable = sgas
[]
[]
[Postprocessors]
[sgas_min]
type = ElementExtremeValue
variable = sgas
value_type = min
[]
[sgas_max]
type = ElementExtremeValue
variable = sgas
value_type = max
[]
[]
(modules/porous_flow/test/tests/jacobian/fflux02.i)
# 1phase, 3components, constant viscosity, constant insitu permeability
# density with constant bulk, Corey relative perm, nonzero gravity, unsaturated with vanGenuchten
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[massfrac0]
[]
[massfrac1]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = -0.7+x+y
[]
[massfrac0]
type = RandomIC
variable = massfrac0
min = 0
max = 0.3
[]
[massfrac1]
type = RandomIC
variable = massfrac1
min = 0
max = 0.4
[]
[]
[Kernels]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
gravity = '-1 -0.1 0'
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = massfrac0
gravity = '-1 -0.1 0'
[]
[flux2]
type = PorousFlowAdvectiveFlux
fluid_component = 2
variable = massfrac1
gravity = '-1 -0.1 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp massfrac0 massfrac1'
number_fluid_phases = 1
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac0 massfrac1'
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/jacobian/disp03.i)
# Test the Jacobian of the dispersive contribution to the PorousFlowDisperiveFlux
# kernel by setting the diffusive component to zero (tortuosity = 0).
[Mesh]
type = GeneratedMesh
dim = 2
nx = 3
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[massfrac0]
[]
[]
[ICs]
[pp]
type = RandomIC
variable = pp
max = 2e1
min = 1e1
[]
[massfrac0]
type = RandomIC
variable = massfrac0
min = 0
max = 1
[]
[]
[Kernels]
[diff0]
type = PorousFlowDispersiveFlux
fluid_component = 0
variable = pp
gravity = '1 0 0'
disp_long = 0.2
disp_trans = 0.1
[]
[diff1]
type = PorousFlowDispersiveFlux
fluid_component = 1
variable = massfrac0
gravity = '1 0 0'
disp_long = 0.2
disp_trans = 0.1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp massfrac0'
number_fluid_phases = 1
number_fluid_components = 2
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1e7
density0 = 10
thermal_expansion = 0
viscosity = 1
[]
[]
[Materials]
[temp]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseFullySaturated
porepressure = pp
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac0'
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[poro]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[diff]
type = PorousFlowDiffusivityConst
diffusion_coeff = '1e-2 1e-1'
tortuosity = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = PorousFlowRelativePermeabilityConst
phase = 0
[]
[]
[Preconditioning]
active = smp
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/dispersion/disp01.i)
# Test dispersive part of PorousFlowDispersiveFlux kernel by setting diffusion
# coefficients to zero. A pressure gradient is applied over the mesh to give a
# uniform velocity. Gravity is set to zero.
# Mass fraction is set to 1 on the left hand side and 0 on the right hand side.
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
xmax = 10
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[pp]
[]
[massfrac0]
[]
[]
[AuxVariables]
[velocity]
family = MONOMIAL
order = FIRST
[]
[]
[AuxKernels]
[velocity]
type = PorousFlowDarcyVelocityComponent
variable = velocity
component = x
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = pic
[]
[massfrac0]
type = ConstantIC
variable = massfrac0
value = 0
[]
[]
[Functions]
[pic]
type = ParsedFunction
expression = 1.1e5-x*1e3
[]
[]
[BCs]
[xleft]
type = DirichletBC
value = 1
variable = massfrac0
boundary = left
[]
[xright]
type = DirichletBC
value = 0
variable = massfrac0
boundary = right
[]
[pright]
type = DirichletBC
variable = pp
boundary = right
value = 1e5
[]
[pleft]
type = DirichletBC
variable = pp
boundary = left
value = 1.1e5
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[adv0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
[]
[diff0]
type = PorousFlowDispersiveFlux
variable = pp
disp_trans = 0
disp_long = 0.2
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = massfrac0
[]
[adv1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = massfrac0
[]
[diff1]
type = PorousFlowDispersiveFlux
fluid_component = 1
variable = massfrac0
disp_trans = 0
disp_long = 0.2
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp massfrac0'
number_fluid_phases = 1
number_fluid_components = 2
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1e9
density0 = 1000
viscosity = 0.001
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseFullySaturated
porepressure = pp
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = massfrac0
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[poro]
type = PorousFlowPorosityConst
porosity = 0.3
[]
[diff]
type = PorousFlowDiffusivityConst
diffusion_coeff = '0 0'
tortuosity = 0.1
[]
[relp]
type = PorousFlowRelativePermeabilityConst
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-9 0 0 0 1e-9 0 0 0 1e-9'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu NONZERO 2 '
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
end_time = 1e3
dtmax = 50
[TimeStepper]
type = IterationAdaptiveDT
growth_factor = 1.5
cutback_factor = 0.5
dt = 1
[]
[]
[VectorPostprocessors]
[xmass]
type = NodalValueSampler
sort_by = id
variable = massfrac0
[]
[]
[Outputs]
[out]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/test/tests/jacobian/fflux05.i)
# 1phase with MD_Gaussian (var = log(mass-density) with Gaussian capillary) formulation
# constant viscosity, constant insitu permeability
# density with constant bulk, Corey relative perm, nonzero gravity
# fully saturated
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[md]
[]
[]
[ICs]
[md]
type = RandomIC
min = 0
max = 1 # unsaturated for md<log(density_P0=0.8)=-0.223
variable = md
[]
[]
[Kernels]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = md
gravity = '-1 -0.1 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'md'
number_fluid_phases = 1
number_fluid_components = 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseMD_Gaussian
mass_density = md
al = 1.1
density_P0 = 0.8
bulk_modulus = 1.5
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/fluidstate/coldwater_injection.i)
# Cold water injection into 1D hot reservoir (Avdonin, 1964)
#
# To generate results presented in documentation for this problem,
# set xmax = 50 and nx = 250 in the Mesh block, and dtmax = 100 and
# end_time = 1.3e5 in the Executioner block.
[Mesh]
type = GeneratedMesh
dim = 1
nx = 25
xmax = 20
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[AuxVariables]
[temperature]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[temperature]
type = PorousFlowPropertyAux
variable = temperature
property = temperature
execute_on = 'initial timestep_end'
[]
[]
[Variables]
[pliquid]
initial_condition = 5e6
[]
[h]
scaling = 1e-6
[]
[]
[ICs]
[hic]
type = PorousFlowFluidPropertyIC
variable = h
porepressure = pliquid
property = enthalpy
temperature = 170
temperature_unit = Celsius
fp = water
[]
[]
[BCs]
[pleft]
type = DirichletBC
variable = pliquid
value = 5.05e6
boundary = left
[]
[pright]
type = DirichletBC
variable = pliquid
value = 5e6
boundary = right
[]
[hleft]
type = DirichletBC
variable = h
value = 678.52e3
boundary = left
[]
[hright]
type = DirichletBC
variable = h
value = 721.4e3
boundary = right
[]
[]
[Kernels]
[mass]
type = PorousFlowMassTimeDerivative
variable = pliquid
[]
[massflux]
type = PorousFlowAdvectiveFlux
variable = pliquid
[]
[heat]
type = PorousFlowEnergyTimeDerivative
variable = h
[]
[heatflux]
type = PorousFlowHeatAdvection
variable = h
[]
[heatcond]
type = PorousFlowHeatConduction
variable = h
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pliquid h'
number_fluid_phases = 2
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
pc_max = 1e6
sat_lr = 0.1
m = 0.5
alpha = 1e-5
[]
[fs]
type = PorousFlowWaterVapor
water_fp = water
capillary_pressure = pc
[]
[]
[FluidProperties]
[water]
type = Water97FluidProperties
[]
[]
[Materials]
[watervapor]
type = PorousFlowFluidStateSingleComponent
porepressure = pliquid
enthalpy = h
temperature_unit = Celsius
capillary_pressure = pc
fluid_state = fs
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.8e-11 0 0 0 1.8e-11 0 0 0 1.8e-11'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.1
sum_s_res = 0.1
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
sum_s_res = 0.1
[]
[internal_energy]
type = PorousFlowMatrixInternalEnergy
density = 2900
specific_heat_capacity = 740
[]
[rock_thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '20 0 0 0 20 0 0 0 20'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
end_time = 5e3
nl_abs_tol = 1e-10
[TimeStepper]
type = IterationAdaptiveDT
dt = 100
[]
[]
[VectorPostprocessors]
[line]
type = ElementValueSampler
sort_by = x
variable = temperature
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
perf_graph = true
[csv]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/examples/solute_tracer_transport/solute_tracer_transport_2D.i)
# Longitudinal dispersivity
disp = 5
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
nx = 100
xmin = -50
xmax = 50
ny = 60
ymin = 0
ymax = 50
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[porepressure]
initial_condition = 1e5
[]
[C]
initial_condition = 0
[]
[]
[AuxVariables]
[Darcy_vel_x]
order = CONSTANT
family = MONOMIAL
[]
[Darcy_vel_y]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[Darcy_vel_x]
type = PorousFlowDarcyVelocityComponent
variable = Darcy_vel_x
component = x
fluid_phase = 0
[]
[Darcy_vel_y]
type = PorousFlowDarcyVelocityComponent
variable = Darcy_vel_y
component = y
fluid_phase = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure C'
number_fluid_phases = 1
number_fluid_components = 2
[]
[]
[Kernels]
[mass_der_water]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = porepressure
[]
[adv_pp]
type = PorousFlowFullySaturatedDarcyFlow
variable = porepressure
fluid_component = 1
[]
[diff_pp]
type = PorousFlowDispersiveFlux
fluid_component = 1
variable = porepressure
disp_trans = 0
disp_long = ${disp}
[]
[mass_der_C]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = C
[]
[adv_C]
type = PorousFlowFullySaturatedDarcyFlow
fluid_component = 0
variable = C
[]
[diff_C]
type = PorousFlowDispersiveFlux
fluid_component = 0
variable = C
disp_trans = 0
disp_long = ${disp}
[]
[]
[FluidProperties]
[water]
type = Water97FluidProperties
[]
[]
[Materials]
[ps]
type = PorousFlow1PhaseFullySaturated
porepressure = porepressure
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.25
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-11 0 0 0 1E-11 0 0 0 1E-11'
[]
[water]
type = PorousFlowSingleComponentFluid
fp = water
phase = 0
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = C
[]
[temperature]
type = PorousFlowTemperature
temperature = 293
[]
[diff]
type = PorousFlowDiffusivityConst
diffusion_coeff = '0 0'
tortuosity = 0.1
[]
[relperm]
type = PorousFlowRelativePermeabilityConst
kr = 1
phase = 0
[]
[]
[DiracKernels]
[source_P]
type = PorousFlowSquarePulsePointSource
point = '0 0 0'
mass_flux = 1e-1
variable = porepressure
[]
[source_C]
type = PorousFlowSquarePulsePointSource
point = '0 0 0'
mass_flux = 1e-7
variable = C
[]
[]
[BCs]
[constant_outlet_porepressure_]
type = DirichletBC
variable = porepressure
value = 1e5
boundary = 'top left right'
[]
[outlet_tracer_top]
type = PorousFlowOutflowBC
variable = C
boundary = top
mass_fraction_component = 0
[]
[outlet_tracer_right]
type = PorousFlowOutflowBC
variable = C
boundary = right
mass_fraction_component = 0
[]
[outlet_tracer_left]
type = PorousFlowOutflowBC
variable = C
boundary = left
mass_fraction_component = 0
[]
[]
[Preconditioning]
[basic]
type = SMP
full = true
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = ' asm lu NONZERO 2'
[]
[]
[Executioner]
type = Transient
end_time = 17280000
dtmax = 100000
nl_rel_tol = 1e-6
nl_abs_tol = 1e-12
[TimeStepper]
type = IterationAdaptiveDT
dt = 1000
[]
[]
[Postprocessors]
[C]
type = PointValue
variable = C
point = '0 25 0'
[]
[Darcy_x]
type = PointValue
variable = Darcy_vel_x
point = '0 25 0'
[]
[Darcy_y]
type = PointValue
variable = Darcy_vel_y
point = '0 25 0'
[]
[]
[Outputs]
file_base = solute_tracer_transport_2D_${disp}
csv = true
exodus = true
[]
(modules/porous_flow/test/tests/hysteresis/hys_order_03.i)
# Test that PorousFlowHysteresisOrder correctly calculates hysteresis order
# Water is removed from the system (so order = 0) until saturation = 0.49
# Then, water is added to the system (so order = 1) until saturation = 0.94
# Then, water is removed from the system (so order = 2) until saturation = 0.62
# Then, water is added to the system (so order = 3) until saturation = 0.87
# Then, water is removed from the system (so order = 3, because max_order = 3) until saturation = 0.68
# Then, water is added to the system (so order = 3, because max_order = 3) until saturation = 0.87
# Then, water is removed from the system (so order = 3, because max_order = 3) until saturation = 0.62
# Then, water is removed from the system (so order = 2) until saturation = 0.49
# Then, water is removed from the system (so order = 0)
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 0.0
[]
[]
[PorousFlowUnsaturated]
porepressure = pp
fp = simple_fluid
[]
[DiracKernels]
[source_sink_0]
type = PorousFlowPointSourceFromPostprocessor
point = '0 0 0'
mass_flux = sink_strength
variable = pp
[]
[source_sink_1]
type = PorousFlowPointSourceFromPostprocessor
point = '1 0 0'
mass_flux = sink_strength
variable = pp
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosityConst
porosity = 1.0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0 0 0 0 0 0 0 0 0'
[]
[hys_order]
type = PorousFlowHysteresisOrder
[]
[]
[AuxVariables]
[hys_order]
family = MONOMIAL
order = CONSTANT
[]
[tp0]
family = MONOMIAL
order = CONSTANT
[]
[tp1]
family = MONOMIAL
order = CONSTANT
[]
[tp2]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[hys_order]
type = PorousFlowPropertyAux
variable = hys_order
property = hysteresis_order
[]
[tp0]
type = PorousFlowPropertyAux
variable = tp0
property = hysteresis_saturation_turning_point
hysteresis_turning_point = 0
[]
[tp1]
type = PorousFlowPropertyAux
variable = tp1
property = hysteresis_saturation_turning_point
hysteresis_turning_point = 1
[]
[tp2]
type = PorousFlowPropertyAux
variable = tp2
property = hysteresis_saturation_turning_point
hysteresis_turning_point = 2
[]
[]
[Functions]
[sink_strength_fcn]
type = ParsedFunction
expression = '30 * if(t <= 8, -1, if(t <= 15, 1, if(t <= 20, -1, if(t <= 24, 1, if(t <= 27, -1, if(t <= 30, 1, -1))))))'
[]
[]
[Postprocessors]
[sink_strength]
type = FunctionValuePostprocessor
function = sink_strength_fcn
outputs = 'none'
[]
[saturation]
type = PointValue
point = '0 0 0'
variable = saturation0
[]
[hys_order]
type = PointValue
point = '0 0 0'
variable = hys_order
[]
[tp0]
type = PointValue
point = '0 0 0'
variable = tp0
[]
[tp1]
type = PointValue
point = '0 0 0'
variable = tp1
[]
[tp2]
type = PointValue
point = '0 0 0'
variable = tp2
[]
[]
[Preconditioning]
[basic]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 40
nl_abs_tol = 1E-7
[]
[Outputs]
[csv]
type = CSV
sync_times = '0 1 2 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 37 40' # cut out the times around which order reductions occur becuase numerical roundoff might mean order is not reduced exactly at these times
sync_only = true
[]
[]
(modules/porous_flow/test/tests/gravity/grav01c_action.i)
# Checking that gravity head is established
# using the Unsaturated Action
# For better agreement with the analytical solution (ana_pp), just increase nx
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
xmin = -1
xmax = 0
[]
[GlobalParams]
PorousFlowDictator = dictator
block = 0
[]
[Variables]
[pp]
[InitialCondition]
type = RandomIC
min = -1
max = 1
[]
[]
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
thermal_expansion = 0.0
bulk_modulus = 2.0
viscosity = 1.0
density0 = 1.0
[]
[]
[PorousFlowUnsaturated]
add_saturation_aux = false
add_darcy_aux = false
porepressure = pp
gravity = '-1 0 0'
fp = the_simple_fluid
van_genuchten_alpha = 1.0
van_genuchten_m = 0.5
relative_permeability_type = Corey
relative_permeability_exponent = 1.0
[]
[Functions]
[ana_pp]
type = ParsedFunction
symbol_names = 'g B p0 rho0'
symbol_values = '1 2 -1 1'
expression = '-B*log(exp(-p0/B)+g*rho0*x/B)' # expected pp at base
[]
[]
[BCs]
[z]
type = DirichletBC
variable = pp
boundary = right
value = -1
[]
[]
[Materials]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[]
[Postprocessors]
[pp_base]
type = PointValue
variable = pp
point = '-1 0 0'
[]
[pp_analytical]
type = FunctionValuePostprocessor
function = ana_pp
point = '-1 0 0'
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Steady
solve_type = Newton
[]
[Outputs]
execute_on = 'timestep_end'
file_base = grav01c_action
exodus = true
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/fluidstate/theis.i)
# Two phase Theis problem: Flow from single source using WaterNCG fluidstate.
# Constant rate injection 2 kg/s
# 1D cylindrical mesh
# Initially, system has only a liquid phase, until enough gas is injected
# to form a gas phase, in which case the system becomes two phase.
[Mesh]
type = GeneratedMesh
dim = 1
nx = 40
xmax = 200
bias_x = 1.05
coord_type = RZ
rz_coord_axis = Y
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[AuxVariables]
[saturation_gas]
order = CONSTANT
family = MONOMIAL
[]
[x1]
order = CONSTANT
family = MONOMIAL
[]
[y0]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[saturation_gas]
type = PorousFlowPropertyAux
variable = saturation_gas
property = saturation
phase = 1
execute_on = timestep_end
[]
[x1]
type = PorousFlowPropertyAux
variable = x1
property = mass_fraction
phase = 0
fluid_component = 1
execute_on = timestep_end
[]
[y0]
type = PorousFlowPropertyAux
variable = y0
property = mass_fraction
phase = 1
fluid_component = 0
execute_on = timestep_end
[]
[]
[Variables]
[pgas]
initial_condition = 20e6
[]
[zi]
initial_condition = 0
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pgas
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pgas
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = zi
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = zi
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas zi'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[fs]
type = PorousFlowWaterNCG
water_fp = water
gas_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[water]
type = Water97FluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 20
[]
[waterncg]
type = PorousFlowFluidState
gas_porepressure = pgas
z = zi
temperature_unit = Celsius
capillary_pressure = pc
fluid_state = fs
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.1
sum_s_res = 0.1
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
[]
[]
[BCs]
[rightwater]
type = DirichletBC
boundary = right
value = 20e6
variable = pgas
[]
[]
[DiracKernels]
[source]
type = PorousFlowSquarePulsePointSource
point = '0 0 0'
mass_flux = 2
variable = zi
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu NONZERO 2 1E-8 1E-10 20'
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
end_time = 2e2
[TimeStepper]
type = IterationAdaptiveDT
dt = 10
growth_factor = 2
[]
[]
[VectorPostprocessors]
[line]
type = NodalValueSampler
sort_by = x
variable = 'pgas zi'
execute_on = 'timestep_end'
[]
[]
[Postprocessors]
[pgas]
type = PointValue
point = '1 0 0'
variable = pgas
[]
[sgas]
type = PointValue
point = '1 0 0'
variable = saturation_gas
[]
[zi]
type = PointValue
point = '1 0 0'
variable = zi
[]
[massgas]
type = PorousFlowFluidMass
fluid_component = 1
[]
[x1]
type = PointValue
point = '1 0 0'
variable = x1
[]
[y0]
type = PointValue
point = '1 0 0'
variable = y0
[]
[]
[Outputs]
print_linear_residuals = false
perf_graph = true
[csvout]
type = CSV
execute_on = timestep_end
execute_vector_postprocessors_on = final
[]
[]
(modules/porous_flow/examples/lava_lamp/1phase_convection.i)
# Two phase density-driven convection of dissolved CO2 in brine
#
# The model starts with CO2 in the liquid phase only. The CO2 diffuses into the brine.
# As the density of the CO2-saturated brine is greater
# than the unsaturated brine, a gravitational instability arises and density-driven
# convection of CO2-rich fingers descend into the unsaturated brine.
#
# The instability is seeded by a random perturbation to the porosity field.
# Mesh adaptivity is used to refine the mesh as the fingers form.
#
# Note: this model is computationally expensive, so should be run with multiple cores.
[GlobalParams]
PorousFlowDictator = 'dictator'
gravity = '0 -9.81 0'
[]
[Adaptivity]
max_h_level = 2
marker = marker
initial_marker = initial
initial_steps = 2
[Indicators]
[indicator]
type = GradientJumpIndicator
variable = zi
[]
[]
[Markers]
[marker]
type = ErrorFractionMarker
indicator = indicator
refine = 0.8
[]
[initial]
type = BoxMarker
bottom_left = '0 1.95 0'
top_right = '2 2 0'
inside = REFINE
outside = DO_NOTHING
[]
[]
[]
[Mesh]
type = GeneratedMesh
dim = 2
ymin = 1.5
ymax = 2
xmax = 2
ny = 20
nx = 40
bias_y = 0.95
[]
[AuxVariables]
[xnacl]
initial_condition = 0.01
[]
[saturation_gas]
order = FIRST
family = MONOMIAL
[]
[xco2l]
order = FIRST
family = MONOMIAL
[]
[density_liquid]
order = FIRST
family = MONOMIAL
[]
[porosity]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[saturation_gas]
type = PorousFlowPropertyAux
variable = saturation_gas
property = saturation
phase = 1
execute_on = 'timestep_end'
[]
[xco2l]
type = PorousFlowPropertyAux
variable = xco2l
property = mass_fraction
phase = 0
fluid_component = 1
execute_on = 'timestep_end'
[]
[density_liquid]
type = PorousFlowPropertyAux
variable = density_liquid
property = density
phase = 0
execute_on = 'timestep_end'
[]
[]
[Variables]
[pgas]
[]
[zi]
scaling = 1e4
[]
[]
[ICs]
[pressure]
type = FunctionIC
function = 10e6-9.81*1000*y
variable = pgas
[]
[zi]
type = ConstantIC
value = 0
variable = zi
[]
[porosity]
type = RandomIC
variable = porosity
min = 0.25
max = 0.275
seed = 0
[]
[]
[BCs]
[top]
type = DirichletBC
value = 0.04
variable = zi
boundary = top
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pgas
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pgas
[]
[diff0]
type = PorousFlowDispersiveFlux
fluid_component = 0
variable = pgas
disp_long = '0 0'
disp_trans = '0 0'
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = zi
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = zi
[]
[diff1]
type = PorousFlowDispersiveFlux
fluid_component = 1
variable = zi
disp_long = '0 0'
disp_trans = '0 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas zi'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[fs]
type = PorousFlowBrineCO2
brine_fp = brine
co2_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2sw]
type = CO2FluidProperties
[]
[co2]
type = TabulatedBicubicFluidProperties
fp = co2sw
[]
[brine]
type = BrineFluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = '45'
[]
[brineco2]
type = PorousFlowFluidState
gas_porepressure = 'pgas'
z = 'zi'
temperature_unit = Celsius
xnacl = 'xnacl'
capillary_pressure = pc
fluid_state = fs
[]
[porosity]
type = PorousFlowPorosityConst
porosity = porosity
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-11 0 0 0 1e-11 0 0 0 1e-11'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
phase = 0
n = 2
s_res = 0.1
sum_s_res = 0.2
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
phase = 1
n = 2
s_res = 0.1
sum_s_res = 0.2
[]
[diffusivity]
type = PorousFlowDiffusivityConst
diffusion_coeff = '2e-9 2e-9 2e-9 2e-9'
tortuosity = '1 1'
[]
[]
[Preconditioning]
active = basic
[mumps_is_best_for_parallel_jobs]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu mumps'
[]
[basic]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu NONZERO 2 '
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
end_time = 1e6
nl_max_its = 25
l_max_its = 100
dtmax = 1e4
nl_abs_tol = 1e-6
[TimeStepper]
type = IterationAdaptiveDT
dt = 100
growth_factor = 2
cutback_factor = 0.5
[]
[]
[Functions]
[flux]
type = ParsedFunction
symbol_values = 'delta_xco2 dt'
symbol_names = 'dx dt'
expression = 'dx/dt'
[]
[]
[Postprocessors]
[total_co2_in_gas]
type = PorousFlowFluidMass
phase = 1
fluid_component = 1
[]
[total_co2_in_liquid]
type = PorousFlowFluidMass
phase = 0
fluid_component = 1
[]
[numdofs]
type = NumDOFs
[]
[delta_xco2]
type = ChangeOverTimePostprocessor
postprocessor = total_co2_in_liquid
[]
[dt]
type = TimestepSize
[]
[flux]
type = FunctionValuePostprocessor
function = flux
[]
[]
[Outputs]
print_linear_residuals = false
perf_graph = true
exodus = true
csv = true
[]
(modules/porous_flow/test/tests/jacobian/line_sink03.i)
# PorousFlowPeacemanBorehole with 2-phase, 3-components, with enthalpy, internal_energy, and thermal_conductivity
# NOTE: this test has suffered from repeated failures since its inception. The problem always appears to be caused by having too many Dirac points in an element: see #10471. As of Nov2020, the dirac7 DiracKernel uses only one Dirac point, not ten_points.bh. One day it would be good to be able to use point_file = ten_points.bh
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[massfrac_ph0_sp0]
[]
[massfrac_ph0_sp1]
[]
[massfrac_ph1_sp0]
[]
[massfrac_ph1_sp1]
[]
[temp]
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp ppwater ppgas massfrac_ph0_sp0 massfrac_ph0_sp1 massfrac_ph1_sp0 massfrac_ph1_sp1'
number_fluid_phases = 2
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[dummy_outflow0]
type = PorousFlowSumQuantity
[]
[dummy_outflow1]
type = PorousFlowSumQuantity
[]
[dummy_outflow2]
type = PorousFlowSumQuantity
[]
[dummy_outflow3]
type = PorousFlowSumQuantity
[]
[dummy_outflow4]
type = PorousFlowSumQuantity
[]
[dummy_outflow5]
type = PorousFlowSumQuantity
[]
[dummy_outflow6]
type = PorousFlowSumQuantity
[]
[dummy_outflow7]
type = PorousFlowSumQuantity
[]
[]
[ICs]
[temp]
type = RandomIC
variable = temp
min = 1
max = 2
[]
[ppwater]
type = RandomIC
variable = ppwater
min = -1
max = 0
[]
[ppgas]
type = RandomIC
variable = ppgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 1
[]
[massfrac_ph0_sp1]
type = RandomIC
variable = massfrac_ph0_sp1
min = 0
max = 1
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 1
[]
[massfrac_ph1_sp1]
type = RandomIC
variable = massfrac_ph1_sp1
min = 0
max = 1
[]
[]
[Kernels]
[dummy_temp]
type = TimeDerivative
variable = temp
[]
[dummy_ppwater]
type = TimeDerivative
variable = ppwater
[]
[dummy_ppgas]
type = TimeDerivative
variable = ppgas
[]
[dummy_m00]
type = TimeDerivative
variable = massfrac_ph0_sp0
[]
[dummy_m01]
type = TimeDerivative
variable = massfrac_ph0_sp1
[]
[dummy_m10]
type = TimeDerivative
variable = massfrac_ph1_sp0
[]
[dummy_m11]
type = TimeDerivative
variable = massfrac_ph1_sp1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
cv = 1.1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1.4
cv = 1.8
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph0_sp1 massfrac_ph1_sp0 massfrac_ph1_sp1'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '0.1 0.02 0.03 0.02 0.0 0.01 0.03 0.01 0.3'
[]
[]
[DiracKernels]
#active = 'dirac6 dirac2' # incorrect jacobian for ny=2
#active = 'dirac0 dirac1 dirac2 dirac3 dirac4 dirac5' # correct jacobian for ny=2
#active = 'dirac0 dirac1 dirac2 dirac3 dirac4 dirac5 dirac6' # incorrect jacobian for ny=2
#active = 'dirac0 dirac1 dirac2 dirac3 dirac4 dirac5 dirac7' # correct jacobian in dbg, but not in opt, for ny=2
#active = 'dirac0 dirac1 dirac2 dirac3 dirac4 dirac5 dirac6' # incorrect jacobian in dbg, but correct for opt, for ny=1
#active = 'dirac0 dirac1 dirac2 dirac3 dirac4 dirac5' # correct jacobian, for ny=1
#active = 'dirac0 dirac1 dirac2 dirac3 dirac4 dirac5 dirac6' # incorrect jacobian in dbg, but correct for opt, for ny=1. row24, col 21 and 22 are wrong. row24=node3, 21=ppwater, 22=ppgas, 24=massfrac_ph0_sp1 (all at node3)
[dirac0]
type = PorousFlowPeacemanBorehole
fluid_phase = 0
variable = ppwater
point_file = one_point.bh
line_length = 1
SumQuantityUO = dummy_outflow0
character = 1
bottom_p_or_t = -10
unit_weight = '1 2 3'
re_constant = 0.123
[]
[dirac1]
type = PorousFlowPeacemanBorehole
fluid_phase = 1
variable = ppgas
line_length = 1
line_direction = '-1 -1 -1'
use_relative_permeability = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow1
character = -0.5
bottom_p_or_t = 10
unit_weight = '1 2 -3'
re_constant = 0.3
[]
[dirac2]
type = PorousFlowPeacemanBorehole
fluid_phase = 0
variable = massfrac_ph0_sp0
line_length = 1.3
line_direction = '1 0 1'
use_mobility = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow2
character = 0.6
bottom_p_or_t = -4
unit_weight = '-1 -2 -3'
re_constant = 0.4
[]
[dirac3]
type = PorousFlowPeacemanBorehole
fluid_phase = 0
variable = massfrac_ph0_sp1
line_length = 1.3
line_direction = '1 1 1'
use_enthalpy = true
mass_fraction_component = 0
point_file = one_point.bh
SumQuantityUO = dummy_outflow3
character = -1
bottom_p_or_t = 3
unit_weight = '0.1 0.2 0.3'
re_constant = 0.5
[]
[dirac4]
type = PorousFlowPeacemanBorehole
fluid_phase = 1
variable = massfrac_ph1_sp0
function_of = temperature
line_length = 0.9
line_direction = '1 1 1'
mass_fraction_component = 1
use_internal_energy = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow4
character = 1.1
bottom_p_or_t = -7
unit_weight = '-1 2 3'
re_constant = 0.6
[]
[dirac5]
type = PorousFlowPeacemanBorehole
fluid_phase = 1
variable = temp
line_length = 0.9
function_of = temperature
line_direction = '1 2 3'
mass_fraction_component = 2
use_internal_energy = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow5
character = 0.9
bottom_p_or_t = -8
unit_weight = '1 2 1'
re_constant = 0.7
[]
[dirac6]
type = PorousFlowPeacemanBorehole
fluid_phase = 0
variable = ppwater
point_file = nine_points.bh
SumQuantityUO = dummy_outflow6
character = 0
bottom_p_or_t = 10
unit_weight = '0.0 0.0 0.0'
[]
[dirac7]
type = PorousFlowPeacemanBorehole
fluid_phase = 1
variable = massfrac_ph0_sp0
use_mobility = true
mass_fraction_component = 1
use_relative_permeability = true
use_internal_energy = true
point_file = one_point.bh
#NOTE this commented-out line: point_file = ten_points.bh
SumQuantityUO = dummy_outflow7
character = -1
bottom_p_or_t = 10
unit_weight = '0.1 0.2 0.3'
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
#petsc_options = '-snes_test_display'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
file_base = line_sink03
[]
(modules/porous_flow/test/tests/sinks/s01.i)
# apply a sink flux and observe the correct behavior
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = 0
xmax = 1
ymin = 0
ymax = 1
zmin = 0
zmax = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Variables]
[pp]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = y+1
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.3
density0 = 1.1
thermal_expansion = 0
viscosity = 1.1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-5 0 0 0 1E-5 0 0 0 1E-5'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[AuxVariables]
[flux_out]
[]
[xval]
[]
[yval]
[]
[]
[ICs]
[xval]
type = FunctionIC
variable = xval
function = x
[]
[yval]
type = FunctionIC
variable = yval
function = y
[]
[]
[Functions]
[mass00]
type = ParsedFunction
expression = 'vol*por*dens0*exp(pp/bulk)'
symbol_names = 'vol por dens0 pp bulk'
symbol_values = '0.25 0.1 1.1 p00 1.3'
[]
[mass01]
type = ParsedFunction
expression = 'vol*por*dens0*exp(pp/bulk)'
symbol_names = 'vol por dens0 pp bulk'
symbol_values = '0.25 0.1 1.1 p01 1.3'
[]
[expected_mass_change00]
type = ParsedFunction
expression = 'fcn*perm*dens0*exp(pp/bulk)/visc*area*dt'
symbol_names = 'fcn perm dens0 pp bulk visc area dt'
symbol_values = '6 1 1 0 1.3 1 0.5 1E-3'
[]
[]
[Postprocessors]
[p00]
type = PointValue
point = '0 0 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[m00]
type = FunctionValuePostprocessor
function = mass00
execute_on = 'initial timestep_end'
[]
[del_m00]
type = FunctionValuePostprocessor
function = expected_mass_change00
execute_on = 'timestep_end'
[]
[p10]
type = PointValue
point = '1 0 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[p01]
type = PointValue
point = '0 1 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[m01]
type = FunctionValuePostprocessor
function = mass01
execute_on = 'initial timestep_end'
[]
[p11]
type = PointValue
point = '1 1 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[]
[BCs]
[flux]
type = PorousFlowSink
boundary = 'left'
variable = pp
use_mobility = false
use_relperm = true
fluid_phase = 0
flux_function = 6
save_in = flux_out
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_max_it -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu 10000 NONZERO 2'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E-3
end_time = 1E-2
nl_rel_tol = 1E-12
nl_abs_tol = 1E-12
[]
[Outputs]
file_base = s01
[console]
type = Console
execute_on = 'nonlinear linear'
[]
[csv]
type = CSV
execute_on = 'initial timestep_end'
[]
[]
(modules/porous_flow/examples/thm_example/2D.i)
# Two phase, temperature-dependent, with mechanics, radial with fine mesh, constant injection of cold co2 into a overburden-reservoir-underburden containing mostly water
# species=0 is water
# species=1 is co2
# phase=0 is liquid, and since massfrac_ph0_sp0 = 1, this is all water
# phase=1 is gas, and since massfrac_ph1_sp0 = 0, this is all co2
#
# The mesh used below has very high resolution, so the simulation takes a long time to complete.
# Some suggested meshes of different resolution:
# nx=50, bias_x=1.2
# nx=100, bias_x=1.1
# nx=200, bias_x=1.05
# nx=400, bias_x=1.02
# nx=1000, bias_x=1.01
# nx=2000, bias_x=1.003
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2000
bias_x = 1.003
xmin = 0.1
xmax = 5000
ny = 1
ymin = 0
ymax = 11
coord_type = RZ
[]
[GlobalParams]
displacements = 'disp_r disp_z'
PorousFlowDictator = dictator
gravity = '0 0 0'
biot_coefficient = 1.0
[]
[Variables]
[pwater]
initial_condition = 18.3e6
[]
[sgas]
initial_condition = 0.0
[]
[temp]
initial_condition = 358
[]
[disp_r]
[]
[]
[AuxVariables]
[rate]
[]
[disp_z]
[]
[massfrac_ph0_sp0]
initial_condition = 1 # all H20 in phase=0
[]
[massfrac_ph1_sp0]
initial_condition = 0 # no H2O in phase=1
[]
[pgas]
family = MONOMIAL
order = FIRST
[]
[swater]
family = MONOMIAL
order = FIRST
[]
[stress_rr]
order = CONSTANT
family = MONOMIAL
[]
[stress_tt]
order = CONSTANT
family = MONOMIAL
[]
[stress_zz]
order = CONSTANT
family = MONOMIAL
[]
[]
[Kernels]
[mass_water_dot]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pwater
[]
[flux_water]
type = PorousFlowAdvectiveFlux
fluid_component = 0
use_displaced_mesh = false
variable = pwater
[]
[mass_co2_dot]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[flux_co2]
type = PorousFlowAdvectiveFlux
fluid_component = 1
use_displaced_mesh = false
variable = sgas
[]
[energy_dot]
type = PorousFlowEnergyTimeDerivative
variable = temp
[]
[advection]
type = PorousFlowHeatAdvection
use_displaced_mesh = false
variable = temp
[]
[conduction]
type = PorousFlowExponentialDecay
use_displaced_mesh = false
variable = temp
reference = 358
rate = rate
[]
[grad_stress_r]
type = StressDivergenceRZTensors
temperature = temp
eigenstrain_names = thermal_contribution
variable = disp_r
use_displaced_mesh = false
component = 0
[]
[poro_r]
type = PorousFlowEffectiveStressCoupling
variable = disp_r
use_displaced_mesh = false
component = 0
[]
[]
[AuxKernels]
[rate]
type = FunctionAux
variable = rate
execute_on = timestep_begin
function = decay_rate
[]
[pgas]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = pgas
[]
[swater]
type = PorousFlowPropertyAux
property = saturation
phase = 0
variable = swater
[]
[stress_rr]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_rr
index_i = 0
index_j = 0
[]
[stress_tt]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_tt
index_i = 2
index_j = 2
[]
[stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 1
index_j = 1
[]
[]
[Functions]
[decay_rate]
# Eqn(26) of the first paper of LaForce et al.
# Ka * (rho C)_a = 10056886.914
# h = 11
type = ParsedFunction
expression = 'sqrt(10056886.914/t)/11.0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp pwater sgas disp_r'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[]
[FluidProperties]
[water]
type = SimpleFluidProperties
bulk_modulus = 2.27e14
density0 = 970.0
viscosity = 0.3394e-3
cv = 4149.0
cp = 4149.0
porepressure_coefficient = 0.0
thermal_expansion = 0
[]
[co2]
type = SimpleFluidProperties
bulk_modulus = 2.27e14
density0 = 516.48
viscosity = 0.0393e-3
cv = 2920.5
cp = 2920.5
porepressure_coefficient = 0.0
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = pwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[water]
type = PorousFlowSingleComponentFluid
fp = water
phase = 0
[]
[gas]
type = PorousFlowSingleComponentFluid
fp = co2
phase = 1
[]
[porosity_reservoir]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[permeability_reservoir]
type = PorousFlowPermeabilityConst
permeability = '2e-12 0 0 0 0 0 0 0 0'
[]
[relperm_liquid]
type = PorousFlowRelativePermeabilityCorey
n = 4
phase = 0
s_res = 0.200
sum_s_res = 0.405
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityBC
phase = 1
s_res = 0.205
sum_s_res = 0.405
nw_phase = true
lambda = 2
[]
[thermal_conductivity_reservoir]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '0 0 0 0 1.320 0 0 0 0'
wet_thermal_conductivity = '0 0 0 0 3.083 0 0 0 0'
[]
[internal_energy_reservoir]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1100
density = 2350.0
[]
[elasticity_tensor]
type = ComputeIsotropicElasticityTensor
shear_modulus = 6.0E9
poissons_ratio = 0.2
[]
[strain]
type = ComputeAxisymmetricRZSmallStrain
eigenstrain_names = 'thermal_contribution ini_stress'
[]
[ini_strain]
type = ComputeEigenstrainFromInitialStress
initial_stress = '-12.8E6 0 0 0 -51.3E6 0 0 0 -12.8E6'
eigenstrain_name = ini_stress
[]
[thermal_contribution]
type = ComputeThermalExpansionEigenstrain
temperature = temp
stress_free_temperature = 358
thermal_expansion_coeff = 5E-6
eigenstrain_name = thermal_contribution
[]
[stress]
type = ComputeLinearElasticStress
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[]
[BCs]
[outer_pressure_fixed]
type = DirichletBC
boundary = right
value = 18.3e6
variable = pwater
[]
[outer_saturation_fixed]
type = DirichletBC
boundary = right
value = 0.0
variable = sgas
[]
[outer_temp_fixed]
type = DirichletBC
boundary = right
value = 358
variable = temp
[]
[fixed_outer_r]
type = DirichletBC
variable = disp_r
value = 0
boundary = right
[]
[co2_injection]
type = PorousFlowSink
boundary = left
variable = sgas
use_mobility = false
use_relperm = false
fluid_phase = 1
flux_function = 'min(t/100.0,1)*(-2.294001475)' # 5.0E5 T/year = 15.855 kg/s, over area of 2Pi*0.1*11
[]
[cold_co2]
type = DirichletBC
boundary = left
variable = temp
value = 294
[]
[cavity_pressure_x]
type = Pressure
boundary = left
variable = disp_r
component = 0
postprocessor = p_bh # note, this lags
use_displaced_mesh = false
[]
[]
[Postprocessors]
[p_bh]
type = PointValue
variable = pwater
point = '0.1 0 0'
execute_on = timestep_begin
use_displaced_mesh = false
[]
[]
[VectorPostprocessors]
[ptsuss]
type = LineValueSampler
use_displaced_mesh = false
start_point = '0.1 0 0'
end_point = '5000 0 0'
sort_by = x
num_points = 50000
outputs = csv
variable = 'pwater temp sgas disp_r stress_rr stress_tt'
[]
[]
[Preconditioning]
active = 'smp'
[smp]
type = SMP
full = true
#petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu NONZERO 2 1E2 1E-5 500'
[]
[mumps]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -pc_factor_mat_solver_package -pc_factor_shift_type -snes_rtol -snes_atol -snes_max_it'
petsc_options_value = 'gmres lu mumps NONZERO 1E-5 1E2 50'
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
end_time = 1.5768e8
#dtmax = 1e6
[TimeStepper]
type = IterationAdaptiveDT
dt = 1
growth_factor = 1.1
[]
[]
[Outputs]
print_linear_residuals = false
sync_times = '3600 86400 2.592E6 1.5768E8'
perf_graph = true
exodus = true
[csv]
type = CSV
sync_only = true
[]
[]
(modules/porous_flow/examples/tutorial/01.i)
# Darcy flow
[Mesh]
[annular]
type = AnnularMeshGenerator
nr = 10
rmin = 1.0
rmax = 10
growth_r = 1.4
nt = 4
dmin = 0
dmax = 90
[]
[make3D]
type = MeshExtruderGenerator
extrusion_vector = '0 0 12'
num_layers = 3
bottom_sideset = 'bottom'
top_sideset = 'top'
input = annular
[]
[shift_down]
type = TransformGenerator
transform = TRANSLATE
vector_value = '0 0 -6'
input = make3D
[]
[aquifer]
type = SubdomainBoundingBoxGenerator
block_id = 1
bottom_left = '0 0 -2'
top_right = '10 10 2'
input = shift_down
[]
[injection_area]
type = ParsedGenerateSideset
combinatorial_geometry = 'x*x+y*y<1.01'
included_subdomains = 1
new_sideset_name = 'injection_area'
input = 'aquifer'
[]
[rename]
type = RenameBlockGenerator
old_block = '0 1'
new_block = 'caps aquifer'
input = 'injection_area'
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[porepressure]
[]
[]
[PorousFlowBasicTHM]
porepressure = porepressure
coupling_type = Hydro
gravity = '0 0 0'
fp = the_simple_fluid
[]
[BCs]
[constant_injection_porepressure]
type = DirichletBC
variable = porepressure
value = 1E6
boundary = injection_area
[]
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2E9
viscosity = 1.0E-3
density0 = 1000.0
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[biot_modulus]
type = PorousFlowConstantBiotModulus
biot_coefficient = 0.8
solid_bulk_compliance = 2E-7
fluid_bulk_modulus = 1E7
[]
[permeability_aquifer]
type = PorousFlowPermeabilityConst
block = aquifer
permeability = '1E-14 0 0 0 1E-14 0 0 0 1E-14'
[]
[permeability_caps]
type = PorousFlowPermeabilityConst
block = caps
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-16'
[]
[]
[Preconditioning]
active = basic
[basic]
type = SMP
full = true
[]
[preferred_but_might_not_be_installed]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu mumps'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1E6
dt = 1E5
nl_abs_tol = 1E-13
[]
[Outputs]
exodus = true
[]
(modules/porous_flow/test/tests/jacobian/basic_advection2.i)
# Basic advection with 1 porepressure as a PorousFlow variable
# Fully saturated
# Constant permeability
# Constant viscosity
[Mesh]
type = GeneratedMesh
dim = 1
nx = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[u]
[]
[P]
[]
[]
[ICs]
[P]
type = RandomIC
variable = P
[]
[u]
type = RandomIC
variable = u
[]
[]
[Kernels]
[dummy_P]
type = NullKernel
variable = P
[]
[u_advection]
type = PorousFlowBasicAdvection
variable = u
phase = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = P
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1
m = 0.6
sat_lr = 0.1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 3
density0 = 4
thermal_expansion = 0
viscosity = 150.0
[]
[]
[Materials]
[temperature_qp]
type = PorousFlowTemperature
[]
[ppss_qp]
type = PorousFlow1PhaseP
porepressure = P
capillary_pressure = pc
[]
[simple_fluid_qp]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '5 0 0 0 5 0 0 0 5'
[]
[relperm_qp]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.1
sum_s_res = 0.1
[]
[darcy_velocity_qp]
type = PorousFlowDarcyVelocityMaterial
gravity = '0.25 0 0'
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
#petsc_options = '-snes_test_display'
petsc_options_iname = '-snes_type'
petsc_options_value = ' test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1
[]
(modules/porous_flow/test/tests/jacobian/outflowbc01.i)
# PorousFlowOutflowBC: testing Jacobian for single-phase, single-component, no heat
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 3
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '1 2 3'
[]
[Variables]
[pp]
[]
[]
[PorousFlowFullySaturated]
add_darcy_aux = false
fp = simple_fluid
porepressure = pp
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1.2
viscosity = 0.4
[]
[]
[BCs]
[outflow0]
type = PorousFlowOutflowBC
boundary = 'front back top bottom front back'
variable = pp
multiplier = 1E8 # so this BC gets weighted much more heavily than Kernels
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.4
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0.1 0.2 0.3 1.8 0.9 1.7 0.4 0.3 1.1'
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1E-7
num_steps = 1
# petsc_options = '-snes_test_jacobian -snes_force_iteration'
# petsc_options_iname = '-snes_type --ksp_type -pc_type -snes_convergence_test'
# petsc_options_value = ' ksponly preonly none skip'
[]
(modules/porous_flow/test/tests/flux_limited_TVD_pflow/pffltvd_3D.i)
# Using flux-limited TVD advection ala Kuzmin and Turek, employing PorousFlow Kernels and UserObjects, with superbee flux-limiter
# 3D version
[Mesh]
type = GeneratedMesh
dim = 3
nx = 10
xmin = 0
xmax = 1
ny = 4
ymin = 0
ymax = 0.5
nz = 3
zmin = 0
zmax = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[porepressure]
[]
[tracer]
[]
[]
[ICs]
[porepressure]
type = FunctionIC
variable = porepressure
function = '1 - x'
[]
[tracer]
type = FunctionIC
variable = tracer
function = 'if(x<0.1,0,if(x>0.3,0,1))'
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = tracer
[]
[flux0]
type = PorousFlowFluxLimitedTVDAdvection
variable = tracer
advective_flux_calculator = advective_flux_calculator_0
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = porepressure
[]
[flux1]
type = PorousFlowFluxLimitedTVDAdvection
variable = porepressure
advective_flux_calculator = advective_flux_calculator_1
[]
[]
[BCs]
[constant_injection_porepressure]
type = DirichletBC
variable = porepressure
value = 1
boundary = left
[]
[no_tracer_on_left]
type = DirichletBC
variable = tracer
value = 0
boundary = left
[]
[remove_component_1]
type = PorousFlowPiecewiseLinearSink
variable = porepressure
boundary = right
fluid_phase = 0
pt_vals = '0 1E3'
multipliers = '0 1E3'
mass_fraction_component = 1
use_mobility = true
flux_function = 1E3
[]
[remove_component_0]
type = PorousFlowPiecewiseLinearSink
variable = tracer
boundary = right
fluid_phase = 0
pt_vals = '0 1E3'
multipliers = '0 1E3'
mass_fraction_component = 0
use_mobility = true
flux_function = 1E3
[]
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2E9
thermal_expansion = 0
viscosity = 1.0
density0 = 1000.0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure tracer'
number_fluid_phases = 1
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
[]
[advective_flux_calculator_0]
type = PorousFlowAdvectiveFluxCalculatorSaturatedMultiComponent
flux_limiter_type = superbee
fluid_component = 0
[]
[advective_flux_calculator_1]
type = PorousFlowAdvectiveFluxCalculatorSaturatedMultiComponent
flux_limiter_type = superbee
fluid_component = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = porepressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = tracer
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = the_simple_fluid
phase = 0
[]
[relperm]
type = PorousFlowRelativePermeabilityConst
phase = 0
[]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-2 0 0 0 1E-2 0 0 0 1E-2'
[]
[]
[Preconditioning]
active = basic
[basic]
type = SMP
full = true
petsc_options = '-ksp_diagonal_scale -ksp_diagonal_scale_fix'
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = ' asm lu NONZERO 2'
[]
[preferred_but_might_not_be_installed]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu mumps'
[]
[]
[VectorPostprocessors]
[tracer]
type = LineValueSampler
start_point = '0 0 0'
end_point = '1 0.5 2'
num_points = 11
sort_by = x
variable = tracer
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 0.3
dt = 6E-2
nl_abs_tol = 1E-8
timestep_tolerance = 1E-3
[]
[Outputs]
print_linear_residuals = false
[out]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phasePS_fv.i)
# Pressure pulse in 1D with 2 phases, 2components - transient using FV
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
nx = 10
xmin = 0
xmax = 100
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[ppwater]
type = MooseVariableFVReal
initial_condition = 2e6
[]
[sgas]
type = MooseVariableFVReal
initial_condition = 0.3
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
type = MooseVariableFVReal
initial_condition = 1
[]
[massfrac_ph1_sp0]
type = MooseVariableFVReal
initial_condition = 0
[]
[ppgas]
type = MooseVariableFVReal
[]
[]
[FVKernels]
[mass0]
type = FVPorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[flux0]
type = FVPorousFlowAdvectiveFlux
variable = ppwater
fluid_component = 0
[]
[mass1]
type = FVPorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[flux1]
type = FVPorousFlowAdvectiveFlux
variable = sgas
fluid_component = 1
[]
[]
[AuxKernels]
[ppgas]
type = ADPorousFlowPropertyAux
property = pressure
phase = 1
variable = ppgas
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater sgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 1e5
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 2e7
density0 = 1
thermal_expansion = 0
viscosity = 1e-5
[]
[]
[Materials]
[temperature]
type = ADPorousFlowTemperature
[]
[ppss]
type = ADPorousFlow2PhasePS
phase0_porepressure = ppwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = ADPorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = ADPorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = ADPorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = ADPorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = ADPorousFlowPermeabilityConst
permeability = '1e-15 0 0 0 1e-15 0 0 0 1e-15'
[]
[relperm_water]
type = ADPorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm_gas]
type = ADPorousFlowRelativePermeabilityCorey
n = 1
phase = 1
[]
[]
[FVBCs]
[leftwater]
type = FVDirichletBC
boundary = left
value = 3e6
variable = ppwater
[]
[rightwater]
type = FVDirichletBC
boundary = right
value = 2e6
variable = ppwater
[]
[sgas]
type = FVDirichletBC
boundary = 'left right'
value = 0.3
variable = sgas
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1e3
end_time = 1e4
[]
[VectorPostprocessors]
[pp]
type = ElementValueSampler
sort_by = x
variable = 'ppwater ppgas'
[]
[]
[Outputs]
file_base = pressure_pulse_1d_2phasePS_fv
print_linear_residuals = false
[csv]
type = CSV
execute_on = final
[]
exodus = true
[]
(modules/porous_flow/examples/natural_convection/natural_convection.i)
# Example problem: Elder, Transient convection in a porous mediu, 1967
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
nx = 64
ny = 32
xmin = 0
xmax = 300
ymax = 0
ymin = -150
[]
[heater]
type = ParsedGenerateSideset
input = gen
combinatorial_geometry = 'x <= 150 & y = -150'
new_sideset_name = heater
[]
uniform_refine = 1
[]
[Variables]
[porepressure]
[]
[T]
initial_condition = 285
[]
[]
[AuxVariables]
[density]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[density]
type = PorousFlowPropertyAux
variable = density
property = density
execute_on = TIMESTEP_END
[]
[]
[ICs]
[hydrostatic]
type = FunctionIC
variable = porepressure
function = '1e5 - 9.81 * 1000 * y'
[]
[]
[GlobalParams]
PorousFlowDictator = 'dictator'
gravity = '0 -9.81 0'
[]
[FluidProperties]
[water]
type = Water97FluidProperties
[]
[]
[PorousFlowFullySaturated]
coupling_type = ThermoHydro
porepressure = porepressure
temperature = T
fp = water
[]
[Materials]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.21E-10 0 0 0 1.21E-10 0 0 0 1.21E-10'
[]
[Matrix_internal_energy]
type = PorousFlowMatrixInternalEnergy
density = 2500
specific_heat_capacity = 0
[]
[thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '1.5 0 0 0 1.5 0 0 0 0'
[]
[]
[BCs]
[t_bot]
type = DirichletBC
variable = T
value = 293
boundary = 'heater'
[]
[t_top]
type = DirichletBC
variable = T
value = 285
boundary = 'top'
[]
[p_top]
type = DirichletBC
variable = porepressure
value = 1e5
boundary = top
[]
[]
[Preconditioning]
[basic]
type = SMP
full = true
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = ' asm lu NONZERO 2'
[]
[]
[Executioner]
type = Transient
end_time = 63072000
dtmax = 1e6
nl_rel_tol = 1e-6
[TimeStepper]
type = IterationAdaptiveDT
dt = 1000
[]
[Adaptivity]
interval = 1
refine_fraction = 0.2
coarsen_fraction = 0.3
max_h_level = 4
[]
[]
[Outputs]
exodus = true
[]
# If you uncomment this it will print out all the kernels and materials that the PorousFlowFullySaturated action generates
#[Problem]
# type = DumpObjectsProblem
# dump_path = PorousFlowFullySaturated
#[]
(modules/porous_flow/test/tests/dirackernels/theis1.i)
# Theis problem: Flow to single sink
# SinglePhase
# Cartesian mesh with logarithmic distribution in x and y.
[Mesh]
type = GeneratedMesh
dim = 2
nx = 20
ny = 20
bias_x = 1.1
bias_y = 1.1
ymax = 100
xmax = 100
# To get consistent ordering of results with distributed meshes
allow_renumbering = false
[]
[GlobalParams]
PorousFlowDictator = dictator
compute_enthalpy = false
compute_internal_energy = false
[]
[Variables]
[pp]
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = pp
gravity = '0 0 0'
fluid_component = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
viscosity = 0.001
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-14 0 0 0 1E-14 0 0 0 1E-14'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0
phase = 0
[]
[]
[Postprocessors]
[porepressure]
type = PointValue
point = '0 0 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[total_mass]
type = PorousFlowFluidMass
execute_on = 'initial timestep_end'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 200
end_time = 1E3
nl_abs_tol = 1e-10
[]
[Outputs]
perf_graph = true
file_base = theis1
[csv]
type = CSV
execute_on = final
[]
[]
[ICs]
[PressureIC]
variable = pp
type = ConstantIC
value = 20e6
[]
[]
[DiracKernels]
[sink]
type = PorousFlowSquarePulsePointSource
end_time = 1000
point = '0 0 0'
mass_flux = -0.04
variable = pp
[]
[]
[BCs]
[right]
type = DirichletBC
variable = pp
value = 20e6
boundary = right
[]
[top]
type = DirichletBC
variable = pp
value = 20e6
boundary = top
[]
[]
[VectorPostprocessors]
[pressure]
type = SideValueSampler
variable = pp
sort_by = x
execute_on = timestep_end
boundary = bottom
[]
[]
(modules/porous_flow/test/tests/newton_cooling/nc06.i)
# Newton cooling from a bar. 1-phase and heat, steady
[Mesh]
type = GeneratedMesh
dim = 2
nx = 100
ny = 1
xmin = 0
xmax = 100
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pressure temp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.8
alpha = 1e-5
[]
[]
[Variables]
[pressure]
[]
[temp]
[]
[]
[ICs]
# have to start these reasonably close to their steady-state values
[pressure]
type = FunctionIC
variable = pressure
function = '(2-x/100)*1E6'
[]
[temperature]
type = FunctionIC
variable = temp
function = 100+0.1*x
[]
[]
[Kernels]
[flux]
type = PorousFlowAdvectiveFlux
fluid_component = 0
gravity = '0 0 0'
variable = pressure
[]
[heat_advection]
type = PorousFlowHeatAdvection
gravity = '0 0 0'
variable = temp
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1e6
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
cv = 1e6
porepressure_coefficient = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-15'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey # irrelevant in this fully-saturated situation
n = 2
phase = 0
[]
[]
[BCs]
[leftp]
type = DirichletBC
variable = pressure
boundary = left
value = 2E6
[]
[leftt]
type = DirichletBC
variable = temp
boundary = left
value = 100
[]
[newtonp]
type = PorousFlowPiecewiseLinearSink
variable = pressure
boundary = right
pt_vals = '0 100000 200000 300000 400000 500000 600000 700000 800000 900000 1000000 1100000 1200000 1300000 1400000 1500000 1600000 1700000 1800000 1900000 2000000'
multipliers = '0. 5.6677197748570516e-6 0.000011931518841831313 0.00001885408740732065 0.000026504708864284114 0.000034959953203725676 0.000044304443352900224 0.00005463170211001232 0.00006604508815181467 0.00007865883048198513 0.00009259917167338928 0.00010800563134618119 0.00012503240252705603 0.00014384989486488752 0.00016464644014777016 0.00018763017719085535 0.0002130311349595711 0.00024110353477682344 0.00027212833465544285 0.00030641604122040985 0.00034430981736352295'
use_mobility = false
use_relperm = false
fluid_phase = 0
flux_function = 1
[]
[newton]
type = PorousFlowPiecewiseLinearSink
variable = temp
boundary = right
pt_vals = '0 100000 200000 300000 400000 500000 600000 700000 800000 900000 1000000 1100000 1200000 1300000 1400000 1500000 1600000 1700000 1800000 1900000 2000000'
multipliers = '0. 5.6677197748570516e-6 0.000011931518841831313 0.00001885408740732065 0.000026504708864284114 0.000034959953203725676 0.000044304443352900224 0.00005463170211001232 0.00006604508815181467 0.00007865883048198513 0.00009259917167338928 0.00010800563134618119 0.00012503240252705603 0.00014384989486488752 0.00016464644014777016 0.00018763017719085535 0.0002130311349595711 0.00024110353477682344 0.00027212833465544285 0.00030641604122040985 0.00034430981736352295'
use_mobility = false
use_relperm = false
use_internal_energy = true
fluid_phase = 0
flux_function = 1
[]
[]
[VectorPostprocessors]
[porepressure]
type = LineValueSampler
variable = pressure
start_point = '0 0.5 0'
end_point = '100 0.5 0'
sort_by = x
num_points = 11
execute_on = timestep_end
[]
[temperature]
type = LineValueSampler
variable = temp
start_point = '0 0.5 0'
end_point = '100 0.5 0'
sort_by = x
num_points = 11
execute_on = timestep_end
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_max_it -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol '
petsc_options_value = 'gmres asm lu 100 NONZERO 2 1E-8 1E-15'
[]
[]
[Executioner]
type = Steady
solve_type = Newton
[]
[Outputs]
file_base = nc06
execute_on = timestep_end
[along_line]
type = CSV
execute_vector_postprocessors_on = timestep_end
[]
[]
(modules/porous_flow/examples/multiapp_fracture_flow/single_fracture_heat_transfer/fracture_app.i)
# Fracture physics. Heat is injected at the left end. Heat advects along the fracture and conducts to the matrix App
[Mesh]
[generate]
type = GeneratedMeshGenerator
dim = 1
nx = 100
xmin = 0
xmax = 100.0
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[frac_P]
initial_condition = 2 # MPa
[]
[frac_T]
initial_condition = 40 # degC
[]
[]
[PorousFlowFullySaturated]
coupling_type = ThermoHydro
porepressure = frac_P
temperature = frac_T
fp = simple_fluid
stabilization = KT
flux_limiter_type = minmod
gravity = '0 0 0'
pressure_unit = MPa
temperature_unit = Celsius
time_unit = seconds
[]
[Kernels]
[toMatrix]
type = PorousFlowHeatMassTransfer
variable = frac_T
v = transferred_matrix_T
transfer_coefficient = 1E2
save_in = joules_per_s
[]
[]
[Modules]
[PorousFlow]
[BCs]
[left_injection]
type = PorousFlowSinkBC
boundary = left
fluid_phase = 0
T_in = 373 # Kelvin!
fp = simple_fluid
flux_function = -10 # 10 kg/s
[]
[]
[]
[]
[BCs]
[mass_production]
type = PorousFlowSink
boundary = right
variable = frac_P
flux_function = 10
[]
[heat_production]
type = PorousFlowSink
boundary = right
variable = frac_T
flux_function = 10
fluid_phase = 0
use_enthalpy = true
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1E9 # in Pa
density0 = 1000
thermal_expansion = 0 # for simplicity
viscosity = 1E-3 # in Pa.s
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosityConst
porosity = 1E-2 # includes fracture aperture of 1E-2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-8 0 0 0 1E-8 0 0 0 1E-8' # roughness times a^3/12
[]
[internal_energy]
type = PorousFlowMatrixInternalEnergy
density = 1
specific_heat_capacity = 0 # basically no rock inside the fracture
[]
[aq_thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '0.6E-2 0 0 0 0.6E-2 0 0 0 0.6E-2' # thermal conductivity of water times fracture aperture
[]
[]
[AuxVariables]
[transferred_matrix_T]
[]
[joules_per_s]
[]
[]
[VectorPostprocessors]
[heat_transfer_rate]
type = NodalValueSampler
outputs = none
sort_by = id
variable = joules_per_s
[]
[frac]
type = NodalValueSampler
outputs = frac
sort_by = x
variable = 'frac_T frac_P'
[]
[]
[Preconditioning]
[entire_jacobian]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 100
end_time = 100
[]
[Outputs]
print_linear_residuals = false
exodus = true
[frac]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/test/tests/flux_limited_TVD_pflow/jacobian_02.i)
# Checking the Jacobian of Flux-Limited TVD Advection, 1 phase, 3 components, unsaturated, using flux_limiter_type = none
[Mesh]
type = GeneratedMesh
dim = 3
nx = 3
xmin = 0
xmax = 1
ny = 1
ymin = -1
ymax = 2
[]
[GlobalParams]
gravity = '1 2 -0.5'
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[tracer0]
[]
[tracer1]
[]
[]
[ICs]
[pp]
variable = pp
type = RandomIC
min = -1
max = 0
[]
[tracer0]
variable = tracer0
type = RandomIC
min = 0
max = 1
[]
[tracer1]
variable = tracer1
type = RandomIC
min = 0
max = 1
[]
[]
[Kernels]
[fluxpp]
type = PorousFlowFluxLimitedTVDAdvection
variable = pp
advective_flux_calculator = advective_flux_calculator_0
[]
[flux0]
type = PorousFlowFluxLimitedTVDAdvection
variable = tracer0
advective_flux_calculator = advective_flux_calculator_1
[]
[flux1]
type = PorousFlowFluxLimitedTVDAdvection
variable = tracer1
advective_flux_calculator = advective_flux_calculator_2
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 0.4
viscosity = 1.1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp tracer0 tracer1'
number_fluid_phases = 1
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1
m = 0.5
[]
[advective_flux_calculator_0]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
flux_limiter_type = None
fluid_component = 0
[]
[advective_flux_calculator_1]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
flux_limiter_type = None
fluid_component = 1
[]
[advective_flux_calculator_2]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
flux_limiter_type = None
fluid_component = 2
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'tracer0 tracer1'
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
phase = 0
n = 2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.21 0 0 0 1.5 0 0 0 0.8'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-snes_type'
petsc_options_value = 'test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1
num_steps = 1
dt = 1
[]
(modules/porous_flow/test/tests/jacobian/hcs01.i)
# apply a half-cubic sink flux and observe the correct behavior
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 2
xmin = -1
xmax = 1
ymin = -1
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[massfrac_ph0_sp0]
[]
[massfrac_ph1_sp0]
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas massfrac_ph0_sp0 massfrac_ph1_sp0'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[ICs]
[ppwater]
type = RandomIC
variable = ppwater
min = -1
max = 0
[]
[ppgas]
type = RandomIC
variable = ppgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 1
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 1
[]
[]
[Kernels]
[dummy_ppwater]
type = TimeDerivative
variable = ppwater
[]
[dummy_ppgas]
type = TimeDerivative
variable = ppgas
[]
[dummy_m00]
type = TimeDerivative
variable = massfrac_ph0_sp0
[]
[dummy_m10]
type = TimeDerivative
variable = massfrac_ph1_sp0
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1.4
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[]
[BCs]
[flux_w]
type = PorousFlowHalfCubicSink
boundary = 'left'
center = 0.1
cutoff = -1.1
max = 2.2
variable = ppwater
mass_fraction_component = 0
fluid_phase = 0
use_relperm = true
use_mobility = true
flux_function = 'x*y'
[]
[flux_g]
type = PorousFlowHalfCubicSink
boundary = 'top left front'
center = 0.5
cutoff = -1.1
max = -2.2
mass_fraction_component = 0
variable = ppgas
fluid_phase = 1
use_relperm = true
use_mobility = true
flux_function = '-x*y'
[]
[flux_1]
type = PorousFlowHalfCubicSink
boundary = 'right'
center = -0.1
cutoff = -1.1
max = 1.2
mass_fraction_component = 1
variable = massfrac_ph0_sp0
fluid_phase = 1
use_relperm = true
use_mobility = true
flux_function = '-1.1*x*y'
[]
[flux_2]
type = PorousFlowHalfCubicSink
boundary = 'bottom'
center = 3.2
cutoff = -1.1
max = 1.2
mass_fraction_component = 1
variable = massfrac_ph1_sp0
fluid_phase = 1
use_relperm = true
use_mobility = true
flux_function = '0.5*x*y'
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 2
[]
[Outputs]
file_base = hcs01
[]
(modules/porous_flow/test/tests/hysteresis/hys_order_05.i)
# Test that PorousFlowHysteresisOrder correctly calculates hysteresis order
# Hysteresis order is initialised = 2, with turning points = (0.6, 0.8)
# Initial saturation is 0.71
# Water is removed from the system (so order = 2) until saturation = 0.6
# Then, water is removed from the system (so order = 0) until saturation = 0.58
# Then, water is added to the system (so order = 1 and turning point = 0.58) until saturation = 0.9
# Then, water is removed from the system (so order = 2 and turning point = 0.9)
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = -9E5
[]
[]
[PorousFlowUnsaturated]
porepressure = pp
fp = simple_fluid
[]
[DiracKernels]
[source_sink_0]
type = PorousFlowPointSourceFromPostprocessor
point = '0 0 0'
mass_flux = sink_strength
variable = pp
[]
[source_sink_1]
type = PorousFlowPointSourceFromPostprocessor
point = '1 0 0'
mass_flux = sink_strength
variable = pp
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosityConst
porosity = 1.0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0 0 0 0 0 0 0 0 0'
[]
[hys_order]
type = PorousFlowHysteresisOrder
initial_order = 2
previous_turning_points = '0.6 0.8'
[]
[]
[AuxVariables]
[hys_order]
family = MONOMIAL
order = CONSTANT
[]
[tp0]
family = MONOMIAL
order = CONSTANT
[]
[tp1]
family = MONOMIAL
order = CONSTANT
[]
[tp2]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[hys_order]
type = PorousFlowPropertyAux
variable = hys_order
property = hysteresis_order
[]
[tp0]
type = PorousFlowPropertyAux
variable = tp0
property = hysteresis_saturation_turning_point
hysteresis_turning_point = 0
[]
[tp1]
type = PorousFlowPropertyAux
variable = tp1
property = hysteresis_saturation_turning_point
hysteresis_turning_point = 1
[]
[tp2]
type = PorousFlowPropertyAux
variable = tp2
property = hysteresis_saturation_turning_point
hysteresis_turning_point = 2
[]
[]
[Functions]
[sink_strength_fcn]
type = ParsedFunction
expression = '30 * if(t <= 2, -1, if(t <= 7, 1, -1))'
[]
[]
[Postprocessors]
[sink_strength]
type = FunctionValuePostprocessor
function = sink_strength_fcn
outputs = 'none'
[]
[saturation]
type = PointValue
point = '0 0 0'
variable = saturation0
[]
[hys_order]
type = PointValue
point = '0 0 0'
variable = hys_order
[]
[tp0]
type = PointValue
point = '0 0 0'
variable = tp0
[]
[tp1]
type = PointValue
point = '0 0 0'
variable = tp1
[]
[tp2]
type = PointValue
point = '0 0 0'
variable = tp2
[]
[]
[Preconditioning]
[basic]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 10
nl_abs_tol = 1E-7
[]
[Outputs]
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/hysteresis/hys_order_02.i)
# Test that PorousFlowHysteresisOrder correctly calculates hysteresis order
# Water is removed from the system (so order = 0) until saturation = 0.55
# Then, water is added to the system (so order = 1) until saturation = 0.74
# Then, water is removed from the system (so order = 2) until saturation = 0.62
# Then, water is added to the system (so order = 3)
# Then, water is added to the system so that saturation exceeds 0.74, so order = 1
# Then, water is added to the system to saturation becomes 1, so order = 0
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 0.0
[]
[]
[PorousFlowUnsaturated]
porepressure = pp
fp = simple_fluid
[]
[DiracKernels]
[source_sink_0]
type = PorousFlowPointSourceFromPostprocessor
point = '0 0 0'
mass_flux = sink_strength
variable = pp
[]
[source_sink_1]
type = PorousFlowPointSourceFromPostprocessor
point = '1 0 0'
mass_flux = sink_strength
variable = pp
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosityConst
porosity = 1.0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0 0 0 0 0 0 0 0 0'
[]
[hys_order]
type = PorousFlowHysteresisOrder
[]
[]
[AuxVariables]
[hys_order]
family = MONOMIAL
order = CONSTANT
[]
[tp0]
family = MONOMIAL
order = CONSTANT
[]
[tp1]
family = MONOMIAL
order = CONSTANT
[]
[tp2]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[hys_order]
type = PorousFlowPropertyAux
variable = hys_order
property = hysteresis_order
[]
[tp0]
type = PorousFlowPropertyAux
variable = tp0
property = hysteresis_saturation_turning_point
hysteresis_turning_point = 0
[]
[tp1]
type = PorousFlowPropertyAux
variable = tp1
property = hysteresis_saturation_turning_point
hysteresis_turning_point = 1
[]
[tp2]
type = PorousFlowPropertyAux
variable = tp2
property = hysteresis_saturation_turning_point
hysteresis_turning_point = 2
[]
[]
[Functions]
[sink_strength_fcn]
type = ParsedFunction
expression = '30 * if(t <= 7, -1, if(t <= 10, 1, if(t <= 12, -1, 1)))'
[]
[]
[Postprocessors]
[sink_strength]
type = FunctionValuePostprocessor
function = sink_strength_fcn
outputs = 'none'
[]
[saturation]
type = PointValue
point = '0 0 0'
variable = saturation0
[]
[hys_order]
type = PointValue
point = '0 0 0'
variable = hys_order
[]
[tp0]
type = PointValue
point = '0 0 0'
variable = tp0
[]
[tp1]
type = PointValue
point = '0 0 0'
variable = tp1
[]
[tp2]
type = PointValue
point = '0 0 0'
variable = tp2
[]
[]
[Preconditioning]
[basic]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 21
nl_abs_tol = 1E-7
[]
[Outputs]
[csv]
type = CSV
sync_times = '0 1 2 9 10 11 12 13 14 15 17 18 19 21' # cut out t=16 and t=20 because numerical roundoff might mean order is not reduced exactly at these times
sync_only = true
[]
[]
(modules/porous_flow/test/tests/numerical_diffusion/fully_saturated_action.i)
# Using the fully-saturated action, which does mass lumping but no upwinding
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
xmin = 0
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[porepressure]
[]
[tracer]
[]
[]
[ICs]
[porepressure]
type = FunctionIC
variable = porepressure
function = '1 - x'
[]
[tracer]
type = FunctionIC
variable = tracer
function = 'if(x<0.1,0,if(x>0.3,0,1))'
[]
[]
[PorousFlowFullySaturated]
porepressure = porepressure
coupling_type = Hydro
gravity = '0 0 0'
fp = the_simple_fluid
mass_fraction_vars = tracer
stabilization = none
[]
[BCs]
[constant_injection_porepressure]
type = DirichletBC
variable = porepressure
value = 1
boundary = left
[]
[no_tracer_on_left]
type = DirichletBC
variable = tracer
value = 0
boundary = left
[]
[remove_component_1]
type = PorousFlowPiecewiseLinearSink
variable = porepressure
boundary = right
fluid_phase = 0
pt_vals = '0 1E3'
multipliers = '0 1E3'
mass_fraction_component = 1
use_mobility = true
flux_function = 1E3
[]
[remove_component_0]
type = PorousFlowPiecewiseLinearSink
variable = tracer
boundary = right
fluid_phase = 0
pt_vals = '0 1E3'
multipliers = '0 1E3'
mass_fraction_component = 0
use_mobility = true
flux_function = 1E3
[]
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2E9
thermal_expansion = 0
viscosity = 1.0
density0 = 1000.0
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-2 0 0 0 1E-2 0 0 0 1E-2'
[]
[]
[Preconditioning]
active = basic
[basic]
type = SMP
full = true
petsc_options = '-ksp_diagonal_scale -ksp_diagonal_scale_fix'
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = ' asm lu NONZERO 2'
[]
[preferred_but_might_not_be_installed]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu mumps'
[]
[]
[VectorPostprocessors]
[tracer]
type = LineValueSampler
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 101
sort_by = x
variable = tracer
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 6
dt = 6E-1
nl_abs_tol = 1E-8
timestep_tolerance = 1E-3
[]
[Outputs]
[out]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/test/tests/poro_elasticity/pp_generation_unconfined_constM.i)
# A sample is constrained on all sides, except its top
# and its boundaries are
# also impermeable. Fluid is pumped into the sample via a
# volumetric source (ie kg/second per cubic meter), and the
# rise in the top surface, porepressure, and stress are observed.
#
# In the standard poromechanics scenario, the Biot Modulus is held
# fixed and the source, s, has units m^3/second/m^3. Then the expected result
# is
# strain_zz = disp_z = BiotCoefficient*BiotModulus*s*t/((bulk + 4*shear/3) + BiotCoefficient^2*BiotModulus)
# porepressure = BiotModulus*(s*t - BiotCoefficient*strain_zz)
# stress_xx = (bulk - 2*shear/3)*strain_zz (remember this is effective stress)
# stress_zz = (bulk + 4*shear/3)*strain_zz (remember this is effective stress)
#
# In porous_flow, however, the source has units kg/second/m^3. The ratios remain
# fixed:
# stress_xx/strain_zz = (bulk - 2*shear/3) = 1 (for the parameters used here)
# stress_zz/strain_zz = (bulk + 4*shear/3) = 4 (for the parameters used here)
# porepressure/strain_zz = 13.3333333 (for the parameters used here)
#
# Expect
# disp_z = 0.3*10*s*t/((2 + 4*1.5/3) + 0.3^2*10) = 0.612245*s*t
# porepressure = 10*(s*t - 0.3*0.612245*s*t) = 8.163265*s*t
# stress_xx = (2 - 2*1.5/3)*0.612245*s*t = 0.612245*s*t
# stress_zz = (2 + 4*shear/3)*0.612245*s*t = 2.44898*s*t
# The relationship between the constant poroelastic source
# s (m^3/second/m^3) and the PorousFlow source, S (kg/second/m^3) is
# S = fluid_density * s = s * exp(porepressure/fluid_bulk)
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -0.5
xmax = 0.5
ymin = -0.5
ymax = 0.5
zmin = -0.5
zmax = 0.5
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
PorousFlowDictator = dictator
block = 0
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure disp_x disp_y disp_z'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.8
alpha = 1e-5
[]
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[porepressure]
[]
[]
[BCs]
[confinex]
type = DirichletBC
variable = disp_x
value = 0
boundary = 'left right'
[]
[confiney]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'bottom top'
[]
[confinez]
type = DirichletBC
variable = disp_z
value = 0
boundary = 'back'
[]
[]
[Kernels]
[grad_stress_x]
type = StressDivergenceTensors
variable = disp_x
component = 0
[]
[grad_stress_y]
type = StressDivergenceTensors
variable = disp_y
component = 1
[]
[grad_stress_z]
type = StressDivergenceTensors
variable = disp_z
component = 2
[]
[poro_x]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
variable = disp_x
component = 0
[]
[poro_y]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
variable = disp_y
component = 1
[]
[poro_z]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
component = 2
variable = disp_z
[]
[poro_vol_exp]
type = PorousFlowMassVolumetricExpansion
variable = porepressure
fluid_component = 0
[]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = porepressure
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = porepressure
gravity = '0 0 0'
fluid_component = 0
[]
[source]
type = BodyForce
function = '0.1*exp(8.163265306*0.1*t/3.3333333333)'
variable = porepressure
[]
[]
[AuxVariables]
[stress_xx]
order = CONSTANT
family = MONOMIAL
[]
[stress_xy]
order = CONSTANT
family = MONOMIAL
[]
[stress_xz]
order = CONSTANT
family = MONOMIAL
[]
[stress_yy]
order = CONSTANT
family = MONOMIAL
[]
[stress_yz]
order = CONSTANT
family = MONOMIAL
[]
[stress_zz]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
[]
[stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
[]
[stress_xz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xz
index_i = 0
index_j = 2
[]
[stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
[]
[stress_yz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yz
index_i = 1
index_j = 2
[]
[stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 3.3333333333
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '1 1.5'
# bulk modulus is lambda + 2*mu/3 = 1 + 2*1.5/3 = 2
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
displacements = 'disp_x disp_y disp_z'
[]
[stress]
type = ComputeLinearElasticStress
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = porepressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityHMBiotModulus
porosity_zero = 0.1
biot_coefficient = 0.3
solid_bulk = 2
constant_fluid_bulk_modulus = 3.3333333333
constant_biot_modulus = 10.0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 1 0 0 0 1' # unimportant
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0 # unimportant in this fully-saturated situation
phase = 0
[]
[]
[Postprocessors]
[p0]
type = PointValue
outputs = csv
point = '0 0 0'
variable = porepressure
[]
[zdisp]
type = PointValue
outputs = csv
point = '0 0 0.5'
variable = disp_z
[]
[stress_xx]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_xx
[]
[stress_yy]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_yy
[]
[stress_zz]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_zz
[]
[]
[Functions]
[stress_xx_over_strain_fcn]
type = ParsedFunction
expression = a/b
symbol_names = 'a b'
symbol_values = 'stress_xx zdisp'
[]
[stress_zz_over_strain_fcn]
type = ParsedFunction
expression = a/b
symbol_names = 'a b'
symbol_values = 'stress_zz zdisp'
[]
[p_over_strain_fcn]
type = ParsedFunction
expression = a/b
symbol_names = 'a b'
symbol_values = 'p0 zdisp'
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-14 1E-10 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
start_time = 0
end_time = 10
dt = 1
[]
[Outputs]
execute_on = 'timestep_end'
file_base = pp_generation_unconfined_constM
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/newton_cooling/nc01.i)
# Newton cooling from a bar. 1-phase transient
[Mesh]
type = GeneratedMesh
dim = 2
nx = 1000
ny = 1
xmin = 0
xmax = 100
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pressure'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.8
alpha = 1e-5
[]
[]
[Variables]
[pressure]
initial_condition = 2E6
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pressure
[]
[flux]
type = PorousFlowAdvectiveFlux
fluid_component = 0
gravity = '0 0 0'
variable = pressure
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1e6
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-15'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey # irrelevant in this fully-saturated situation
n = 2
phase = 0
[]
[]
[BCs]
[left]
type = DirichletBC
variable = pressure
boundary = left
value = 2E6
[]
[newton]
type = PorousFlowPiecewiseLinearSink
variable = pressure
boundary = right
pt_vals = '0 100000 200000 300000 400000 500000 600000 700000 800000 900000 1000000 1100000 1200000 1300000 1400000 1500000 1600000 1700000 1800000 1900000 2000000'
multipliers = '0. 5.6677197748570516e-6 0.000011931518841831313 0.00001885408740732065 0.000026504708864284114 0.000034959953203725676 0.000044304443352900224 0.00005463170211001232 0.00006604508815181467 0.00007865883048198513 0.00009259917167338928 0.00010800563134618119 0.00012503240252705603 0.00014384989486488752 0.00016464644014777016 0.00018763017719085535 0.0002130311349595711 0.00024110353477682344 0.00027212833465544285 0.00030641604122040985 0.00034430981736352295'
use_mobility = false
use_relperm = false
fluid_phase = 0
flux_function = 1
[]
[]
[VectorPostprocessors]
[porepressure]
type = LineValueSampler
variable = pressure
start_point = '0 0.5 0'
end_point = '100 0.5 0'
sort_by = x
num_points = 20
execute_on = timestep_end
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-12 1E-15 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1E8
dt = 1E6
[]
[Outputs]
file_base = nc01
[along_line]
type = CSV
execute_vector_postprocessors_on = final
[]
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phasePSVG.i)
# Pressure pulse in 1D with 2 phases, 2components - transient
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[ppwater]
initial_condition = 2e6
[]
[sgas]
initial_condition = 0.3
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[ppgas]
family = MONOMIAL
order = FIRST
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
variable = ppwater
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
variable = sgas
fluid_component = 1
[]
[]
[AuxKernels]
[ppgas]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = ppgas
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater sgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-4
sat_lr = 0.3
pc_max = 1e6
log_extension = false
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 2e7
density0 = 1
thermal_expansion = 0
viscosity = 1e-5
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = ppwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-15 0 0 0 1e-15 0 0 0 1e-15'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 1
[]
[]
[BCs]
[leftwater]
type = DirichletBC
boundary = left
value = 3e6
variable = ppwater
[]
[rightwater]
type = DirichletBC
boundary = right
value = 2e6
variable = ppwater
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-20 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1e3
end_time = 1e4
[]
[VectorPostprocessors]
[pp]
type = LineValueSampler
warn_discontinuous_face_values = false
sort_by = x
variable = 'ppwater ppgas'
start_point = '0 0 0'
end_point = '100 0 0'
num_points = 11
[]
[]
[Outputs]
file_base = pressure_pulse_1d_2phasePSVG
print_linear_residuals = false
[csv]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/test/tests/hysteresis/except03.i)
# Exception testing of PorousFlowHysteresisOrder
# Incorrect: initial_order incommensurate with previous_turning_points
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[]
[PorousFlowBasicTHM]
porepressure = pp
fp = simple_fluid
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[biot_modulus]
type = PorousFlowConstantBiotModulus
biot_coefficient = 0.8
solid_bulk_compliance = 2e-7
fluid_bulk_modulus = 1e7
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-13 0 0 0 1e-13 0 0 0 1e-13'
[]
[hys_order]
type = PorousFlowHysteresisOrder
initial_order = 1
[]
[]
[Preconditioning]
[basic]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phase_fv.i)
# Pressure pulse in 1D with 2 phases (with one having zero saturation), 2components - transient using FV
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
nx = 10
xmin = 0
xmax = 100
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
type = MooseVariableFVReal
initial_condition = 2E6
[]
[ppgas]
type = MooseVariableFVReal
initial_condition = 2E6
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
type = MooseVariableFVReal
initial_condition = 1
[]
[massfrac_ph1_sp0]
type = MooseVariableFVReal
initial_condition = 0
[]
[]
[FVKernels]
[mass0]
type = FVPorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[flux0]
type = FVPorousFlowAdvectiveFlux
variable = ppwater
gravity = '0 0 0'
fluid_component = 0
[]
[mass1]
type = FVPorousFlowMassTimeDerivative
fluid_component = 1
variable = ppgas
[]
[flux1]
type = FVPorousFlowAdvectiveFlux
variable = ppgas
gravity = '0 0 0'
fluid_component = 1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 2e6
density0 = 1
thermal_expansion = 0
viscosity = 1e-5
[]
[]
[Materials]
[temperature]
type = ADPorousFlowTemperature
[]
[ppss]
type = ADPorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = ADPorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = ADPorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = ADPorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = ADPorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = ADPorousFlowPermeabilityConst
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-15'
[]
[relperm_water]
type = ADPorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm_gas]
type = ADPorousFlowRelativePermeabilityCorey
n = 1
phase = 1
[]
[]
[FVBCs]
[leftwater]
type = FVDirichletBC
boundary = left
value = 3E6
variable = ppwater
[]
[leftgas]
type = FVDirichletBC
boundary = left
value = 3E6
variable = ppgas
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol'
petsc_options_value = 'gmres asm lu NONZERO 2 1E-12'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E3
end_time = 1E4
[]
[Postprocessors]
[p005]
type = PointValue
variable = ppwater
point = '5 0 0'
execute_on = 'initial timestep_end'
[]
[p015]
type = PointValue
variable = ppwater
point = '15 0 0'
execute_on = 'initial timestep_end'
[]
[p025]
type = PointValue
variable = ppwater
point = '25 0 0'
execute_on = 'initial timestep_end'
[]
[p035]
type = PointValue
variable = ppwater
point = '35 0 0'
execute_on = 'initial timestep_end'
[]
[p045]
type = PointValue
variable = ppwater
point = '45 0 0'
execute_on = 'initial timestep_end'
[]
[p055]
type = PointValue
variable = ppwater
point = '55 0 0'
execute_on = 'initial timestep_end'
[]
[p065]
type = PointValue
variable = ppwater
point = '65 0 0'
execute_on = 'initial timestep_end'
[]
[p075]
type = PointValue
variable = ppwater
point = '75 0 0'
execute_on = 'initial timestep_end'
[]
[p085]
type = PointValue
variable = ppwater
point = '85 0 0'
execute_on = 'initial timestep_end'
[]
[p095]
type = PointValue
variable = ppwater
point = '95 0 0'
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
file_base = pressure_pulse_1d_2phase_fv
print_linear_residuals = false
csv = true
[]
(modules/porous_flow/test/tests/fluidstate/brineco2_nonisothermal.i)
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 2
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pgas]
initial_condition = 20e6
[]
[z]
initial_condition = 0.2
[]
[temperature]
initial_condition = 70
[]
[]
[AuxVariables]
[xnacl]
initial_condition = 0.1
[]
[pressure_gas]
order = CONSTANT
family = MONOMIAL
[]
[pressure_water]
order = CONSTANT
family = MONOMIAL
[]
[saturation_gas]
order = CONSTANT
family = MONOMIAL
[]
[saturation_water]
order = CONSTANT
family = MONOMIAL
[]
[density_water]
order = CONSTANT
family = MONOMIAL
[]
[density_gas]
order = CONSTANT
family = MONOMIAL
[]
[viscosity_water]
order = CONSTANT
family = MONOMIAL
[]
[viscosity_gas]
order = CONSTANT
family = MONOMIAL
[]
[enthalpy_water]
order = CONSTANT
family = MONOMIAL
[]
[enthalpy_gas]
order = CONSTANT
family = MONOMIAL
[]
[internal_energy_water]
order = CONSTANT
family = MONOMIAL
[]
[internal_energy_gas]
order = CONSTANT
family = MONOMIAL
[]
[x0_water]
order = CONSTANT
family = MONOMIAL
[]
[x0_gas]
order = CONSTANT
family = MONOMIAL
[]
[x1_water]
order = CONSTANT
family = MONOMIAL
[]
[x1_gas]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[pressure_water]
type = PorousFlowPropertyAux
variable = pressure_water
property = pressure
phase = 0
execute_on = timestep_end
[]
[pressure_gas]
type = PorousFlowPropertyAux
variable = pressure_gas
property = pressure
phase = 1
execute_on = timestep_end
[]
[saturation_water]
type = PorousFlowPropertyAux
variable = saturation_water
property = saturation
phase = 0
execute_on = timestep_end
[]
[saturation_gas]
type = PorousFlowPropertyAux
variable = saturation_gas
property = saturation
phase = 1
execute_on = timestep_end
[]
[density_water]
type = PorousFlowPropertyAux
variable = density_water
property = density
phase = 0
execute_on = timestep_end
[]
[density_gas]
type = PorousFlowPropertyAux
variable = density_gas
property = density
phase = 1
execute_on = timestep_end
[]
[viscosity_water]
type = PorousFlowPropertyAux
variable = viscosity_water
property = viscosity
phase = 0
execute_on = timestep_end
[]
[viscosity_gas]
type = PorousFlowPropertyAux
variable = viscosity_gas
property = viscosity
phase = 1
execute_on = timestep_end
[]
[enthalpy_water]
type = PorousFlowPropertyAux
variable = enthalpy_water
property = enthalpy
phase = 0
execute_on = timestep_end
[]
[enthalpy_gas]
type = PorousFlowPropertyAux
variable = enthalpy_gas
property = enthalpy
phase = 1
execute_on = timestep_end
[]
[internal_energy_water]
type = PorousFlowPropertyAux
variable = internal_energy_water
property = internal_energy
phase = 0
execute_on = timestep_end
[]
[internal_energy_gas]
type = PorousFlowPropertyAux
variable = internal_energy_gas
property = internal_energy
phase = 1
execute_on = timestep_end
[]
[x1_water]
type = PorousFlowPropertyAux
variable = x1_water
property = mass_fraction
phase = 0
fluid_component = 1
execute_on = timestep_end
[]
[x1_gas]
type = PorousFlowPropertyAux
variable = x1_gas
property = mass_fraction
phase = 1
fluid_component = 1
execute_on = timestep_end
[]
[x0_water]
type = PorousFlowPropertyAux
variable = x0_water
property = mass_fraction
phase = 0
fluid_component = 0
execute_on = timestep_end
[]
[x0_gas]
type = PorousFlowPropertyAux
variable = x0_gas
property = mass_fraction
phase = 1
fluid_component = 0
execute_on = timestep_end
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pgas
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = z
fluid_component = 1
[]
[heat]
type = TimeDerivative
variable = temperature
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas z temperature'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[fs]
type = PorousFlowBrineCO2
brine_fp = brine
co2_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[brine]
type = BrineFluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[brineco2]
type = PorousFlowFluidState
gas_porepressure = pgas
z = z
temperature = temperature
temperature_unit = Celsius
xnacl = xnacl
capillary_pressure = pc
fluid_state = fs
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
[density_water]
type = ElementIntegralVariablePostprocessor
variable = density_water
[]
[density_gas]
type = ElementIntegralVariablePostprocessor
variable = density_gas
[]
[viscosity_water]
type = ElementIntegralVariablePostprocessor
variable = viscosity_water
[]
[viscosity_gas]
type = ElementIntegralVariablePostprocessor
variable = viscosity_gas
[]
[enthalpy_water]
type = ElementIntegralVariablePostprocessor
variable = enthalpy_water
[]
[enthalpy_gas]
type = ElementIntegralVariablePostprocessor
variable = enthalpy_gas
[]
[internal_energy_water]
type = ElementIntegralVariablePostprocessor
variable = internal_energy_water
[]
[internal_energy_gas]
type = ElementIntegralVariablePostprocessor
variable = internal_energy_gas
[]
[x1_water]
type = ElementIntegralVariablePostprocessor
variable = x1_water
[]
[x0_water]
type = ElementIntegralVariablePostprocessor
variable = x0_water
[]
[x1_gas]
type = ElementIntegralVariablePostprocessor
variable = x1_gas
[]
[x0_gas]
type = ElementIntegralVariablePostprocessor
variable = x0_gas
[]
[sg]
type = ElementIntegralVariablePostprocessor
variable = saturation_gas
[]
[sw]
type = ElementIntegralVariablePostprocessor
variable = saturation_water
[]
[pwater]
type = ElementIntegralVariablePostprocessor
variable = pressure_water
[]
[pgas]
type = ElementIntegralVariablePostprocessor
variable = pressure_gas
[]
[x0mass]
type = PorousFlowFluidMass
fluid_component = 0
phase = '0 1'
[]
[x1mass]
type = PorousFlowFluidMass
fluid_component = 1
phase = '0 1'
[]
[]
[Outputs]
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/test/tests/infiltration_and_drainage/rsc02.i)
# RSC test with low-res time and spatial resolution
[Mesh]
type = GeneratedMesh
dim = 2
nx = 200
ny = 1
xmin = 0
xmax = 10 # x is the depth variable, called zeta in RSC
ymin = 0
ymax = 0.05
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Functions]
[dts]
type = PiecewiseLinear
y = '3E-2 5E-1 8E-1'
x = '0 1 5'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pwater poil'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureRSC
oil_viscosity = 2E-3
scale_ratio = 2E3
shift = 10
[]
[]
[FluidProperties]
[water]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 10
thermal_expansion = 0
viscosity = 1e-3
[]
[oil]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 20
thermal_expansion = 0
viscosity = 2e-3
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = pwater
phase1_porepressure = poil
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[water]
type = PorousFlowSingleComponentFluid
fp = water
phase = 0
compute_enthalpy = false
compute_internal_energy = false
[]
[oil]
type = PorousFlowSingleComponentFluid
fp = oil
phase = 1
compute_enthalpy = false
compute_internal_energy = false
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm_oil]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.25
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-5 0 0 0 1E-5 0 0 0 1E-5'
[]
[]
[Variables]
[pwater]
[]
[poil]
[]
[]
[ICs]
[water_init]
type = ConstantIC
variable = pwater
value = 0
[]
[oil_init]
type = ConstantIC
variable = poil
value = 15
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pwater
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = poil
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = poil
[]
[]
[AuxVariables]
[SWater]
family = MONOMIAL
order = CONSTANT
[]
[SOil]
family = MONOMIAL
order = CONSTANT
[]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[]
[AuxKernels]
[SWater]
type = MaterialStdVectorAux
property = PorousFlow_saturation_qp
index = 0
variable = SWater
[]
[SOil]
type = MaterialStdVectorAux
property = PorousFlow_saturation_qp
index = 1
variable = SOil
[]
[]
[BCs]
# we are pumping water into a system that has virtually incompressible fluids, hence the pressures rise enormously. this adversely affects convergence because of almost-overflows and precision-loss problems. The fixed things help keep pressures low and so prevent these awful behaviours. the movement of the saturation front is the same regardless of the fixed things.
active = 'recharge fixedoil fixedwater'
[recharge]
type = PorousFlowSink
variable = pwater
boundary = 'left'
flux_function = -1.0
[]
[fixedwater]
type = DirichletBC
variable = pwater
boundary = 'right'
value = 0
[]
[fixedoil]
type = DirichletBC
variable = poil
boundary = 'right'
value = 15
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu NONZERO 2 1E-10 1E-10 10000'
[]
[]
[VectorPostprocessors]
[swater]
type = LineValueSampler
warn_discontinuous_face_values = false
variable = SWater
start_point = '0 0 0'
end_point = '7 0 0'
sort_by = x
num_points = 21
execute_on = timestep_end
[]
[]
[Executioner]
type = Transient
solve_type = Newton
petsc_options = '-snes_converged_reason'
end_time = 5
[TimeStepper]
type = FunctionDT
function = dts
[]
[]
[Outputs]
file_base = rsc02
[along_line]
type = CSV
execute_vector_postprocessors_on = final
[]
[exodus]
type = Exodus
execute_on = 'initial final'
[]
[]
(modules/porous_flow/test/tests/jacobian/pls03.i)
# PorousFlowPiecewiseLinearSink with 2-phase, 3-components
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 2
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[massfrac_ph0_sp0]
[]
[massfrac_ph0_sp1]
[]
[massfrac_ph1_sp0]
[]
[massfrac_ph1_sp1]
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas massfrac_ph0_sp0 massfrac_ph0_sp1 massfrac_ph1_sp0 massfrac_ph1_sp1'
number_fluid_phases = 2
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[ICs]
[ppwater]
type = RandomIC
variable = ppwater
min = -1
max = 0
[]
[ppgas]
type = RandomIC
variable = ppgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 1
[]
[massfrac_ph0_sp1]
type = RandomIC
variable = massfrac_ph0_sp1
min = 0
max = 1
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 1
[]
[massfrac_ph1_sp1]
type = RandomIC
variable = massfrac_ph1_sp1
min = 0
max = 1
[]
[]
[Kernels]
[dummy_ppwater]
type = TimeDerivative
variable = ppwater
[]
[dummy_ppgas]
type = TimeDerivative
variable = ppgas
[]
[dummy_m00]
type = TimeDerivative
variable = massfrac_ph0_sp0
[]
[dummy_m01]
type = TimeDerivative
variable = massfrac_ph0_sp1
[]
[dummy_m10]
type = TimeDerivative
variable = massfrac_ph1_sp0
[]
[dummy_m11]
type = TimeDerivative
variable = massfrac_ph1_sp1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1.4
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph0_sp1 massfrac_ph1_sp0 massfrac_ph1_sp1'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[]
[BCs]
[flux_w]
type = PorousFlowPiecewiseLinearSink
boundary = 'left'
pt_vals = '-1 -0.5 0'
multipliers = '1 2 4'
variable = ppwater
mass_fraction_component = 0
fluid_phase = 0
use_relperm = true
use_mobility = true
flux_function = 'x*y'
[]
[flux_g]
type = PorousFlowPiecewiseLinearSink
boundary = 'top'
pt_vals = '0 0.5 1'
multipliers = '1 -2 4'
mass_fraction_component = 0
variable = ppgas
fluid_phase = 1
use_relperm = true
use_mobility = true
flux_function = '-x*y'
[]
[flux_1]
type = PorousFlowPiecewiseLinearSink
boundary = 'right'
pt_vals = '0 0.5 1'
multipliers = '1 3 4'
mass_fraction_component = 1
variable = massfrac_ph0_sp0
fluid_phase = 0
use_relperm = true
use_mobility = true
[]
[flux_2]
type = PorousFlowPiecewiseLinearSink
boundary = 'back top'
pt_vals = '0 0.5 1'
multipliers = '0 1 -3'
mass_fraction_component = 1
variable = massfrac_ph1_sp0
fluid_phase = 1
use_relperm = true
use_mobility = true
flux_function = '0.5*x*y'
[]
[flux_3]
type = PorousFlowPiecewiseLinearSink
boundary = 'right'
pt_vals = '0 0.5 1'
multipliers = '1 3 4'
mass_fraction_component = 2
variable = ppwater
fluid_phase = 0
use_relperm = true
use_mobility = true
[]
[flux_4]
type = PorousFlowPiecewiseLinearSink
boundary = 'back top'
pt_vals = '0 0.5 1'
multipliers = '0 1 -3'
mass_fraction_component = 2
variable = massfrac_ph1_sp0
fluid_phase = 1
use_relperm = true
use_mobility = true
flux_function = '-0.5*x*y'
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 2
[]
[Outputs]
file_base = pls03
[]
(modules/porous_flow/test/tests/sinks/outflow_except1.i)
# Exception testing of PorousFlowOutflowBC. Note that this input file will produce an error message
[Mesh]
type = GeneratedMesh
dim = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
number_fluid_components = 1
number_fluid_phases = 1
porous_flow_vars = pp
[]
[]
[Variables]
[pp]
[]
[]
[Kernels]
[dummy]
type = Diffusion
variable = pp
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
[]
[]
[Materials]
[ppss]
type = PorousFlow1PhaseFullySaturated
porepressure = pp
[]
[fluid_props]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[relperm]
type = PorousFlowRelativePermeabilityConst
phase = 0
[]
[massfrac]
type = PorousFlowMassFraction
[]
[temperature]
type = PorousFlowTemperature
temperature = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0.4 0 0 0 0.4 0 0 0 0.4'
[]
[]
[BCs]
[outflow]
type = PorousFlowOutflowBC
boundary = left
variable = pp
mass_fraction_component = 1
[]
[]
[Executioner]
type = Transient
dt = 1
num_steps = 1
[]
(modules/porous_flow/test/tests/dispersion/disp01_fv.i)
# Test dispersive part of FVPorousFlowDispersiveFlux kernel by setting diffusion
# coefficients to zero. A pressure gradient is applied over the mesh to give a
# uniform velocity. Gravity is set to zero.
# Mass fraction is set to 1 on the left hand side and 0 on the right hand side.
[Mesh]
type = GeneratedMesh
dim = 2
nx = 20
xmax = 10
bias_x = 1.1
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[pp]
type = MooseVariableFVReal
[]
[massfrac0]
type = MooseVariableFVReal
[]
[]
[AuxVariables]
[velocity]
family = MONOMIAL
order = FIRST
[]
[]
[AuxKernels]
[velocity]
type = ADPorousFlowDarcyVelocityComponent
variable = velocity
component = x
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = pic
[]
[massfrac0]
type = ConstantIC
variable = massfrac0
value = 0
[]
[]
[Functions]
[pic]
type = ParsedFunction
expression = '1.1e5-x*1e3'
[]
[]
[FVBCs]
[xleft]
type = FVDirichletBC
value = 1
variable = massfrac0
boundary = left
[]
[xright]
type = FVDirichletBC
value = 0
variable = massfrac0
boundary = right
[]
[pright]
type = FVDirichletBC
variable = pp
boundary = right
value = 1e5
[]
[pleft]
type = FVDirichletBC
variable = pp
boundary = left
value = 1.1e5
[]
[]
[FVKernels]
[mass0]
type = FVPorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[adv0]
type = FVPorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
[]
[diff0]
type = FVPorousFlowDispersiveFlux
variable = pp
disp_trans = 0
disp_long = 0.2
[]
[mass1]
type = FVPorousFlowMassTimeDerivative
fluid_component = 1
variable = massfrac0
[]
[adv1]
type = FVPorousFlowAdvectiveFlux
fluid_component = 1
variable = massfrac0
[]
[diff1]
type = FVPorousFlowDispersiveFlux
fluid_component = 1
variable = massfrac0
disp_trans = 0
disp_long = 0.2
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp massfrac0'
number_fluid_phases = 1
number_fluid_components = 2
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1e9
density0 = 1000
viscosity = 0.001
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = ADPorousFlowTemperature
[]
[ppss]
type = ADPorousFlow1PhaseFullySaturated
porepressure = pp
[]
[massfrac]
type = ADPorousFlowMassFraction
mass_fraction_vars = massfrac0
[]
[simple_fluid]
type = ADPorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[poro]
type = ADPorousFlowPorosityConst
porosity = 0.3
[]
[diff]
type = ADPorousFlowDiffusivityConst
diffusion_coeff = '0 0'
tortuosity = 0.1
[]
[relp]
type = ADPorousFlowRelativePermeabilityConst
phase = 0
[]
[permeability]
type = ADPorousFlowPermeabilityConst
permeability = '1e-9 0 0 0 1e-9 0 0 0 1e-9'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'gmres asm lu NONZERO'
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
end_time = 3e2
dtmax = 100
nl_abs_tol = 1e-12
[TimeStepper]
type = IterationAdaptiveDT
growth_factor = 2
cutback_factor = 0.5
dt = 10
[]
[]
[VectorPostprocessors]
[xmass]
type = ElementValueSampler
sort_by = id
variable = 'massfrac0 velocity'
[]
[]
[Outputs]
[out]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/examples/tutorial/13.i)
# Example of reactive transport model with dissolution of dolomite
#
# The equilibrium system has 5 primary species (Variables) and
# 5 secondary species (PorousFlowMassFractionAqueousEquilibrium).
# Some of the equilibrium constants have been chosen rather arbitrarily.
#
# Equilibrium reactions
# H+ + HCO3- = CO2(aq)
# -H+ + HCO3- = CO32-
# HCO3- + Ca2+ = CaHCO3+
# HCO3- + Mg2+ = MgHCO3+
# HCO3- + Fe2+ = FeHCO3+
#
# The kinetic reaction that dissolves dolomite involves all 5 primary species.
#
# -2H+ + 2HCO3- + Ca2+ + 0.8Mg2+ + 0.2Fe2+ = CaMg0.8Fe0.2(CO3)2
#
# The initial concentration of precipitated dolomite is high, so it starts
# to dissolve immediately, increasing the concentrations of the primary species.
#
# Only single-phase, fully saturated physics is used.
# The pressure gradient is fixed, so that the Darcy velocity is 0.1m/s.
#
# Primary species are injected from the left side, and they flow to the right.
# Less dolomite dissolution therefore occurs on the left side (where
# the primary species have higher concentration).
#
# This test is more fully documented in tutorial_13
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
xmax = 1
[]
[Variables]
[h+]
[]
[hco3-]
[]
[ca2+]
[]
[mg2+]
[]
[fe2+]
[]
[]
[AuxVariables]
[eqm_k0]
initial_condition = 2.19E6
[]
[eqm_k1]
initial_condition = 4.73E-11
[]
[eqm_k2]
initial_condition = 0.222
[]
[eqm_k3]
initial_condition = 1E-2
[]
[eqm_k4]
initial_condition = 1E-3
[]
[kinetic_k]
initial_condition = 326.2
[]
[pressure]
[]
[dolomite]
family = MONOMIAL
order = CONSTANT
[]
[dolomite_initial]
initial_condition = 1E-7
[]
[]
[AuxKernels]
[dolomite]
type = PorousFlowPropertyAux
property = mineral_concentration
mineral_species = 0
variable = dolomite
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[ICs]
[pressure_ic]
type = FunctionIC
variable = pressure
function = '(1 - x) * 1E6'
[]
[h+_ic]
type = BoundingBoxIC
variable = h+
x1 = 0.0
y1 = 0.0
x2 = 1.0e-10
y2 = 0.25
inside = 5.0e-2
outside = 1.0e-6
[]
[hco3_ic]
type = BoundingBoxIC
variable = hco3-
x1 = 0.0
y1 = 0.0
x2 = 1.0e-10
y2 = 0.25
inside = 5.0e-2
outside = 1.0e-6
[]
[ca2_ic]
type = BoundingBoxIC
variable = ca2+
x1 = 0.0
y1 = 0.0
x2 = 1.0e-10
y2 = 0.25
inside = 5.0e-2
outside = 1.0e-6
[]
[mg2_ic]
type = BoundingBoxIC
variable = mg2+
x1 = 0.0
y1 = 0.0
x2 = 1.0e-10
y2 = 0.25
inside = 5.0e-2
outside = 1.0e-6
[]
[fe2_ic]
type = BoundingBoxIC
variable = fe2+
x1 = 0.0
y1 = 0.0
x2 = 1.0e-10
y2 = 0.25
inside = 5.0e-2
outside = 1.0e-6
[]
[]
[Kernels]
[h+_ie]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = h+
[]
[h+_conv]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = h+
[]
[predis_h+]
type = PorousFlowPreDis
variable = h+
mineral_density = 2875.0
stoichiometry = -2
[]
[hco3-_ie]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = hco3-
[]
[hco3-_conv]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = hco3-
[]
[predis_hco3-]
type = PorousFlowPreDis
variable = hco3-
mineral_density = 2875.0
stoichiometry = 2
[]
[ca2+_ie]
type = PorousFlowMassTimeDerivative
fluid_component = 2
variable = ca2+
[]
[ca2+_conv]
type = PorousFlowAdvectiveFlux
fluid_component = 2
variable = ca2+
[]
[predis_ca2+]
type = PorousFlowPreDis
variable = ca2+
mineral_density = 2875.0
stoichiometry = 1
[]
[mg2+_ie]
type = PorousFlowMassTimeDerivative
fluid_component = 3
variable = mg2+
[]
[mg2+_conv]
type = PorousFlowAdvectiveFlux
fluid_component = 3
variable = mg2+
[]
[predis_mg2+]
type = PorousFlowPreDis
variable = mg2+
mineral_density = 2875.0
stoichiometry = 0.8
[]
[fe2+_ie]
type = PorousFlowMassTimeDerivative
fluid_component = 4
variable = fe2+
[]
[fe2+_conv]
type = PorousFlowAdvectiveFlux
fluid_component = 4
variable = fe2+
[]
[predis_fe2+]
type = PorousFlowPreDis
variable = fe2+
mineral_density = 2875.0
stoichiometry = 0.2
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'h+ hco3- ca2+ mg2+ fe2+'
number_fluid_phases = 1
number_fluid_components = 6
number_aqueous_equilibrium = 5
number_aqueous_kinetic = 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
viscosity = 1E-3
[]
[]
[BCs]
[hco3-_left]
type = DirichletBC
variable = hco3-
boundary = left
value = 5E-2
[]
[h+_left]
type = DirichletBC
variable = h+
boundary = left
value = 5E-2
[]
[ca2+_left]
type = DirichletBC
variable = ca2+
boundary = left
value = 5E-2
[]
[mg2+_left]
type = DirichletBC
variable = mg2+
boundary = left
value = 5E-2
[]
[fe2+_left]
type = DirichletBC
variable = fe2+
boundary = left
value = 5E-2
[]
[hco3-_right]
type = DirichletBC
variable = hco3-
boundary = right
value = 1E-6
[]
[h+_right]
type = DirichletBC
variable = h+
boundary = right
value = 1e-6
[]
[ca2+_right]
type = DirichletBC
variable = ca2+
boundary = right
value = 1E-6
[]
[mg2+_right]
type = DirichletBC
variable = mg2+
boundary = right
value = 1E-6
[]
[fe2+_right]
type = DirichletBC
variable = fe2+
boundary = right
value = 1E-6
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 298.15
[]
[ppss]
type = PorousFlow1PhaseFullySaturated
porepressure = pressure
[]
[equilibrium_massfrac]
type = PorousFlowMassFractionAqueousEquilibriumChemistry
mass_fraction_vars = 'h+ hco3- ca2+ mg2+ fe2+'
num_reactions = 5
equilibrium_constants = 'eqm_k0 eqm_k1 eqm_k2 eqm_k3 eqm_k4'
primary_activity_coefficients = '1 1 1 1 1'
secondary_activity_coefficients = '1 1 1 1 1'
reactions = '1 1 0 0 0
-1 1 0 0 0
0 1 1 0 0
0 1 0 1 0
0 1 0 0 1'
[]
[kinetic]
type = PorousFlowAqueousPreDisChemistry
primary_concentrations = 'h+ hco3- ca2+ mg2+ fe2+'
num_reactions = 1
equilibrium_constants = kinetic_k
primary_activity_coefficients = '1 1 1 1 1'
reactions = '-2 2 1 0.8 0.2'
specific_reactive_surface_area = '1.2E-8'
kinetic_rate_constant = '3E-4'
activation_energy = '1.5e4'
molar_volume = 64365.0
gas_constant = 8.314
reference_temperature = 298.15
[]
[dolomite_conc]
type = PorousFlowAqueousPreDisMineral
initial_concentrations = dolomite_initial
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-10 0 0 0 1E-10 0 0 0 1E-10'
[]
[relp]
type = PorousFlowRelativePermeabilityConst
phase = 0
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1
[TimeStepper]
type = IterationAdaptiveDT
dt = 0.1
[]
[]
[Preconditioning]
active = basic
[basic]
type = SMP
full = true
petsc_options = '-ksp_diagonal_scale -ksp_diagonal_scale_fix'
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = ' asm lu NONZERO 2'
[]
[preferred_but_might_not_be_installed]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu mumps'
[]
[]
[Outputs]
print_linear_residuals = false
perf_graph = true
exodus = true
[]
(modules/porous_flow/test/tests/fluidstate/waterncg.i)
# Tests correct calculation of properties in PorousFlowWaterNCG.
# This test is run three times, with the initial condition of z (the total mass
# fraction of NCG in all phases) varied to give either a single phase liquid, a
# single phase gas, or two phases.
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 2
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pgas]
initial_condition = 1e6
[]
[z]
initial_condition = 0.005
[]
[]
[AuxVariables]
[pressure_gas]
order = CONSTANT
family = MONOMIAL
[]
[pressure_water]
order = CONSTANT
family = MONOMIAL
[]
[saturation_gas]
order = CONSTANT
family = MONOMIAL
[]
[saturation_water]
order = CONSTANT
family = MONOMIAL
[]
[density_water]
order = CONSTANT
family = MONOMIAL
[]
[density_gas]
order = CONSTANT
family = MONOMIAL
[]
[viscosity_water]
order = CONSTANT
family = MONOMIAL
[]
[viscosity_gas]
order = CONSTANT
family = MONOMIAL
[]
[enthalpy_water]
order = CONSTANT
family = MONOMIAL
[]
[enthalpy_gas]
order = CONSTANT
family = MONOMIAL
[]
[internal_energy_water]
order = CONSTANT
family = MONOMIAL
[]
[internal_energy_gas]
order = CONSTANT
family = MONOMIAL
[]
[x0_water]
order = CONSTANT
family = MONOMIAL
[]
[x0_gas]
order = CONSTANT
family = MONOMIAL
[]
[x1_water]
order = CONSTANT
family = MONOMIAL
[]
[x1_gas]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[pressure_water]
type = PorousFlowPropertyAux
variable = pressure_water
property = pressure
phase = 0
execute_on = timestep_end
[]
[pressure_gas]
type = PorousFlowPropertyAux
variable = pressure_gas
property = pressure
phase = 1
execute_on = timestep_end
[]
[saturation_water]
type = PorousFlowPropertyAux
variable = saturation_water
property = saturation
phase = 0
execute_on = timestep_end
[]
[saturation_gas]
type = PorousFlowPropertyAux
variable = saturation_gas
property = saturation
phase = 1
execute_on = timestep_end
[]
[density_water]
type = PorousFlowPropertyAux
variable = density_water
property = density
phase = 0
execute_on = timestep_end
[]
[density_gas]
type = PorousFlowPropertyAux
variable = density_gas
property = density
phase = 1
execute_on = timestep_end
[]
[viscosity_water]
type = PorousFlowPropertyAux
variable = viscosity_water
property = viscosity
phase = 0
execute_on = timestep_end
[]
[viscosity_gas]
type = PorousFlowPropertyAux
variable = viscosity_gas
property = viscosity
phase = 1
execute_on = timestep_end
[]
[enthalpy_water]
type = PorousFlowPropertyAux
variable = enthalpy_water
property = enthalpy
phase = 0
execute_on = timestep_end
[]
[enthalpy_gas]
type = PorousFlowPropertyAux
variable = enthalpy_gas
property = enthalpy
phase = 1
execute_on = timestep_end
[]
[internal_energy_water]
type = PorousFlowPropertyAux
variable = internal_energy_water
property = internal_energy
phase = 0
execute_on = timestep_end
[]
[internal_energy_gas]
type = PorousFlowPropertyAux
variable = internal_energy_gas
property = internal_energy
phase = 1
execute_on = timestep_end
[]
[x1_water]
type = PorousFlowPropertyAux
variable = x1_water
property = mass_fraction
phase = 0
fluid_component = 1
execute_on = timestep_end
[]
[x1_gas]
type = PorousFlowPropertyAux
variable = x1_gas
property = mass_fraction
phase = 1
fluid_component = 1
execute_on = timestep_end
[]
[x0_water]
type = PorousFlowPropertyAux
variable = x0_water
property = mass_fraction
phase = 0
fluid_component = 0
execute_on = timestep_end
[]
[x0_gas]
type = PorousFlowPropertyAux
variable = x0_gas
property = mass_fraction
phase = 1
fluid_component = 0
execute_on = timestep_end
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pgas
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = z
fluid_component = 1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas z'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[fs]
type = PorousFlowWaterNCG
water_fp = water
gas_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[water]
type = Water97FluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 50
[]
[waterncg]
type = PorousFlowFluidState
gas_porepressure = pgas
z = z
temperature_unit = Celsius
capillary_pressure = pc
fluid_state = fs
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
[density_water]
type = ElementIntegralVariablePostprocessor
variable = density_water
[]
[density_gas]
type = ElementIntegralVariablePostprocessor
variable = density_gas
[]
[viscosity_water]
type = ElementIntegralVariablePostprocessor
variable = viscosity_water
[]
[viscosity_gas]
type = ElementIntegralVariablePostprocessor
variable = viscosity_gas
[]
[enthalpy_water]
type = ElementIntegralVariablePostprocessor
variable = enthalpy_water
[]
[enthalpy_gas]
type = ElementIntegralVariablePostprocessor
variable = enthalpy_gas
[]
[internal_energy_water]
type = ElementIntegralVariablePostprocessor
variable = internal_energy_water
[]
[internal_energy_gas]
type = ElementIntegralVariablePostprocessor
variable = internal_energy_gas
[]
[x1_water]
type = ElementIntegralVariablePostprocessor
variable = x1_water
[]
[x0_water]
type = ElementIntegralVariablePostprocessor
variable = x0_water
[]
[x1_gas]
type = ElementIntegralVariablePostprocessor
variable = x1_gas
[]
[x0_gas]
type = ElementIntegralVariablePostprocessor
variable = x0_gas
[]
[sg]
type = ElementIntegralVariablePostprocessor
variable = saturation_gas
[]
[sw]
type = ElementIntegralVariablePostprocessor
variable = saturation_water
[]
[pwater]
type = ElementIntegralVariablePostprocessor
variable = pressure_water
[]
[pgas]
type = ElementIntegralVariablePostprocessor
variable = pressure_gas
[]
[x0mass]
type = PorousFlowFluidMass
fluid_component = 0
phase = '0 1'
[]
[x1mass]
type = PorousFlowFluidMass
fluid_component = 1
phase = '0 1'
[]
[]
[Outputs]
exodus = true
file_base = waterncg_liquid
[]
(modules/porous_flow/test/tests/adaptivity/quad_adaptivity.i)
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 2
nx = 2
ny = 2
[]
[]
[Adaptivity]
marker = marker
max_h_level = 1
[Markers]
[marker]
type = UniformMarker
mark = REFINE
[]
[]
[]
[GlobalParams]
PorousFlowDictator = 'dictator'
[]
[Variables]
[pp]
initial_condition = '0'
[]
[]
[Kernels]
[mass]
type = PorousFlowMassTimeDerivative
variable = pp
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = pp
gravity = '0 0 0'
[]
[]
[BCs]
[left]
type = DirichletBC
variable = pp
boundary = 'left'
value = 1
[]
[right]
type = DirichletBC
variable = pp
boundary = 'right'
value = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.2
density0 = 1
viscosity = 1
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = 'pp'
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = '0.1'
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-3 0 0 0 1e-3 0 0 0 1e-3'
[]
[relperm]
type = PorousFlowRelativePermeabilityConst
phase = 0
[]
[]
[Postprocessors]
[numdofs]
type = NumDOFs
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
end_time = 4
dt = 1
solve_type = Newton
nl_abs_tol = 1e-12
[]
[Outputs]
exodus = true
perf_graph = true
show = pp
[]
(modules/porous_flow/test/tests/heat_advection/heat_advection_1d.i)
# 1phase, heat advecting with a moving fluid
# Full upwinding is used
[Mesh]
type = GeneratedMesh
dim = 1
nx = 50
xmin = 0
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[temp]
initial_condition = 200
[]
[pp]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = '1-x'
[]
[]
[BCs]
[pp0]
type = DirichletBC
variable = pp
boundary = left
value = 1
[]
[pp1]
type = DirichletBC
variable = pp
boundary = right
value = 0
[]
[spit_heat]
type = DirichletBC
variable = temp
boundary = left
value = 300
[]
[suck_heat]
type = DirichletBC
variable = temp
boundary = right
value = 200
[]
[]
[Kernels]
[mass_dot]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[advection]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
[]
[energy_dot]
type = PorousFlowEnergyTimeDerivative
variable = temp
[]
[heat_advection]
type = PorousFlowHeatAdvection
variable = temp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.6
alpha = 1.3
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 100
density0 = 1000
viscosity = 4.4
thermal_expansion = 0
cv = 2
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1.0
density = 125
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[massfrac]
type = PorousFlowMassFraction
[]
[PS]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres bjacobi 1E-15 1E-10 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 0.01
end_time = 0.6
[]
[VectorPostprocessors]
[T]
type = LineValueSampler
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 51
sort_by = x
variable = temp
[]
[]
[Outputs]
[csv]
type = CSV
sync_times = '0.1 0.6'
sync_only = true
[]
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_fully_saturated_fv.i)
# Pressure pulse in 1D with 1 phase fully saturated - transient FV model
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
type = MooseVariableFVReal
initial_condition = 2E6
[]
[]
[FVKernels]
[mass0]
type = FVPorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[flux]
type = FVPorousFlowAdvectiveFlux
variable = pp
gravity = '0 0 0'
fluid_component = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[]
[Materials]
[temperature]
type = ADPorousFlowTemperature
temperature = 293
[]
[ppss]
type = ADPorousFlow1PhaseFullySaturated
porepressure = pp
[]
[massfrac]
type = ADPorousFlowMassFraction
[]
[simple_fluid]
type = ADPorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = ADPorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = ADPorousFlowPermeabilityConst
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-15'
[]
[relperm]
type = ADPorousFlowRelativePermeabilityConst
kr = 1
phase = 0
[]
[]
[FVBCs]
[left]
type = FVPorousFlowAdvectiveFluxBC
boundary = left
porepressure_value = 3E6
variable = pp
gravity = '0 0 0'
fluid_component = 0
phase = 0
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E3
end_time = 1E4
[]
[Postprocessors]
[p005]
type = PointValue
variable = pp
point = '5 0 0'
execute_on = 'initial timestep_end'
[]
[p015]
type = PointValue
variable = pp
point = '15 0 0'
execute_on = 'initial timestep_end'
[]
[p025]
type = PointValue
variable = pp
point = '25 0 0'
execute_on = 'initial timestep_end'
[]
[p035]
type = PointValue
variable = pp
point = '35 0 0'
execute_on = 'initial timestep_end'
[]
[p045]
type = PointValue
variable = pp
point = '45 0 0'
execute_on = 'initial timestep_end'
[]
[p055]
type = PointValue
variable = pp
point = '55 0 0'
execute_on = 'initial timestep_end'
[]
[p065]
type = PointValue
variable = pp
point = '65 0 0'
execute_on = 'initial timestep_end'
[]
[p075]
type = PointValue
variable = pp
point = '75 0 0'
execute_on = 'initial timestep_end'
[]
[p085]
type = PointValue
variable = pp
point = '85 0 0'
execute_on = 'initial timestep_end'
[]
[p095]
type = PointValue
variable = pp
point = '95 0 0'
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
file_base = pressure_pulse_1d_fv
print_linear_residuals = false
csv = true
[]
(modules/porous_flow/test/tests/dirackernels/bh07.i)
# Comparison with analytical solution for cylindrically-symmetric situation
[Mesh]
type = FileMesh
file = bh07_input.e
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Functions]
[dts]
type = PiecewiseLinear
y = '1000 10000'
x = '100 1000'
[]
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[fflux]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
gravity = '0 0 0'
[]
[]
[BCs]
[fix_outer]
type = DirichletBC
boundary = perimeter
variable = pp
value = 1E7
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.8
alpha = 1e-5
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-11 0 0 0 1E-11 0 0 0 1E-11'
[]
[relperm]
type = PorousFlowRelativePermeabilityFLAC
m = 2
phase = 0
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
variable = pp
SumQuantityUO = borehole_total_outflow_mass
point_file = bh07.bh
fluid_phase = 0
bottom_p_or_t = 0
unit_weight = '0 0 0'
use_mobility = true
re_constant = 0.1594 # use Chen and Zhang version
character = 2 # double the strength because bh07.bh only fills half the mesh
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
execute_on = 'initial timestep_end'
[]
[fluid_mass]
type = PorousFlowFluidMass
execute_on = 'initial timestep_end'
[]
[]
[VectorPostprocessors]
[pp]
type = LineValueSampler
variable = pp
start_point = '0 0 0'
end_point = '300 0 0'
sort_by = x
num_points = 300
execute_on = timestep_end
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 1E3
solve_type = NEWTON
[TimeStepper]
# get only marginally better results for smaller time steps
type = FunctionDT
function = dts
[]
[]
[Outputs]
file_base = bh07
[along_line]
type = CSV
execute_on = final
[]
[exodus]
type = Exodus
execute_on = 'initial final'
[]
[]
(modules/porous_flow/test/tests/gravity/fully_saturated_grav01b.i)
# Checking that gravity head is established
# 1phase, constant and large fluid-bulk, constant viscosity, constant permeability
# fully saturated with fully-saturated Kernel
# For better agreement with the analytical solution (ana_pp), just increase nx
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
xmin = -1
xmax = 0
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[InitialCondition]
type = RandomIC
min = 0
max = 1
[]
[]
[]
[Kernels]
[flux0]
type = PorousFlowFullySaturatedDarcyBase
variable = pp
gravity = '-1 0 0'
[]
[]
[Functions]
[ana_pp]
type = ParsedFunction
symbol_names = 'g B p0 rho0'
symbol_values = '1 1E3 0 1'
expression = '-B*log(exp(-p0/B)+g*rho0*x/B)' # expected pp at base
[]
[]
[BCs]
[z]
type = DirichletBC
variable = pp
boundary = right
value = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1e3
density0 = 1
viscosity = 1
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseFullySaturated
porepressure = pp
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[]
[Postprocessors]
[pp_base]
type = PointValue
variable = pp
point = '-1 0 0'
[]
[pp_analytical]
type = FunctionValuePostprocessor
function = ana_pp
point = '-1 0 0'
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Steady
solve_type = Newton
[]
[Outputs]
execute_on = 'timestep_end'
file_base = fully_saturated_grav01b
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/buckley_leverett/bl01.i)
# Buckley-Leverett 1-phase.
# The front starts at (around) x=5, and at t=50 it should
# have moved to x=9.6. The version below has a nonzero
# suction function, and at t=50, the front sits between
# (about) x=9.6 and x=9.9. Changing the van-Genuchten
# al parameter to 1E-4 softens the front so it sits between
# (about) x=9.7 and x=10.4, and the simulation runs much faster.
# With al=1E-2 and nx=600, the front sits between x=9.6 and x=9.8,
# but takes about 100 times longer to run.
[Mesh]
type = GeneratedMesh
dim = 1
nx = 150
xmin = 0
xmax = 15
[]
[GlobalParams]
PorousFlowDictator = dictator
compute_enthalpy = false
compute_internal_energy = false
[]
[Variables]
[pp]
[InitialCondition]
type = FunctionIC
function = 'max((1000000-x/5*1000000)-20000,-20000)'
[]
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
gravity = '0 0 0'
[]
[]
[BCs]
[left]
type = DirichletBC
variable = pp
boundary = left
value = 980000
[]
[]
[AuxVariables]
[sat]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[sat]
type = MaterialStdVectorAux
variable = sat
execute_on = timestep_end
index = 0
property = PorousFlow_saturation_qp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.8
alpha = 1e-3
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e6
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-10 0 0 0 1E-10 0 0 0 1E-10'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.15
[]
[]
[Preconditioning]
active = andy
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres bjacobi 1E-10 1E-10 20'
[]
[]
[Functions]
[timestepper]
type = PiecewiseLinear
x = '0 0.01 0.1 1 1.5 2 20 30 40 50'
y = '0.01 0.1 0.2 0.3 0.1 0.3 0.3 0.4 0.4 0.5'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 50
[TimeStepper]
type = FunctionDT
function = timestepper
[]
[]
[VectorPostprocessors]
[pp]
type = LineValueSampler
start_point = '0 0 0'
end_point = '15 0 0'
num_points = 150
sort_by = x
variable = pp
[]
[sat]
type = LineValueSampler
warn_discontinuous_face_values = false
start_point = '0 0 0'
end_point = '15 0 0'
num_points = 150
sort_by = x
variable = sat
[]
[]
[Outputs]
file_base = bl01
[csv]
type = CSV
sync_only = true
sync_times = '0.01 50'
[]
[exodus]
type = Exodus
execute_on = 'initial final'
[]
[]
(modules/porous_flow/test/tests/flux_limited_TVD_pflow/jacobian_04.i)
# Checking the Jacobian of Flux-Limited TVD Advection, 1 phase, 1 component, unsaturated, using flux_limiter_type != none
# This is quite a heavy test, but we need a fairly big mesh to check the flux-limiting+TVD is happening correctly
#
# Here we use snes_check_jacobian instead of snes_type=test. The former just checks the Jacobian for the
# random initial conditions, while the latter checks for u=1 and u=-1
#
# The Jacobian is correct for u=1 and u=-1, but the finite-difference scheme used by snes_type=test gives the
# wrong answer.
# For u=constant, the Kuzmin-Turek scheme adds as much antidiffusion as possible, resulting in a central-difference
# version of advection (flux_limiter = 1). This is correct, and the Jacobian is calculated correctly.
# However, when computing the Jacobian using finite differences, u is increased or decreased at a node.
# This results in that node being at a maximum or minimum, which means no antidiffusion should be added
# (flux_limiter = 0). This corresponds to a full-upwind scheme. So the finite-difference computes the
# Jacobian in the full-upwind scenario, which is incorrect (the original residual = 0, after finite-differencing
# the residual comes from the full-upwind scenario).
[Mesh]
type = GeneratedMesh
dim = 3
nx = 3
xmin = 0
xmax = 1
ny = 4
ymin = -1
ymax = 2
bias_y = 1.5
nz = 4
zmin = 1
zmax = 2
bias_z = 0.8
[]
[GlobalParams]
gravity = '1 2 -0.5'
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[]
[ICs]
[pp]
variable = pp
type = RandomIC
min = -1
max = 0
[]
[]
[Kernels]
[flux0]
type = PorousFlowFluxLimitedTVDAdvection
variable = pp
advective_flux_calculator = advective_flux_calculator
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 0.4
viscosity = 1.1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1
m = 0.5
[]
[advective_flux_calculator]
type = PorousFlowAdvectiveFluxCalculatorUnsaturated
flux_limiter_type = minmod
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
phase = 0
n = 2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.21 0 0 0 1.5 0 0 0 0.8'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options = '-snes_check_jacobian'
[]
[]
[Executioner]
type = Transient
solve_type = Linear # this is to force convergence even though the nonlinear residual is high: we just care about the Jacobian in this test
end_time = 1
num_steps = 1
dt = 1
[]
(modules/porous_flow/test/tests/hysteresis/hys_order_04.i)
# Test that PorousFlowHysteresisOrder correctly calculates hysteresis order
# Hysteresis order is initialised = 3, with turning points = (0.5, 0.9, 0.6)
# Initial saturation is 0.71
# Water is removed from the system (so order = 3) until saturation = 0.6
# Water is removed from the system (so order = 2) until saturation = 0.5
# Water is removed from the system (so order = 0)
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = -9E5
[]
[]
[PorousFlowUnsaturated]
porepressure = pp
fp = simple_fluid
[]
[DiracKernels]
[source_sink_0]
type = PorousFlowPointSourceFromPostprocessor
point = '0 0 0'
mass_flux = sink_strength
variable = pp
[]
[source_sink_1]
type = PorousFlowPointSourceFromPostprocessor
point = '1 0 0'
mass_flux = sink_strength
variable = pp
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosityConst
porosity = 1.0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0 0 0 0 0 0 0 0 0'
[]
[hys_order]
type = PorousFlowHysteresisOrder
initial_order = 3
previous_turning_points = '0.5 0.9 0.6'
[]
[]
[AuxVariables]
[hys_order]
family = MONOMIAL
order = CONSTANT
[]
[tp0]
family = MONOMIAL
order = CONSTANT
[]
[tp1]
family = MONOMIAL
order = CONSTANT
[]
[tp2]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[hys_order]
type = PorousFlowPropertyAux
variable = hys_order
property = hysteresis_order
[]
[tp0]
type = PorousFlowPropertyAux
variable = tp0
property = hysteresis_saturation_turning_point
hysteresis_turning_point = 0
[]
[tp1]
type = PorousFlowPropertyAux
variable = tp1
property = hysteresis_saturation_turning_point
hysteresis_turning_point = 1
[]
[tp2]
type = PorousFlowPropertyAux
variable = tp2
property = hysteresis_saturation_turning_point
hysteresis_turning_point = 2
[]
[]
[Functions]
[sink_strength_fcn]
type = ParsedFunction
expression = '-30'
[]
[]
[Postprocessors]
[sink_strength]
type = FunctionValuePostprocessor
function = sink_strength_fcn
outputs = 'none'
[]
[saturation]
type = PointValue
point = '0 0 0'
variable = saturation0
[]
[hys_order]
type = PointValue
point = '0 0 0'
variable = hys_order
[]
[tp0]
type = PointValue
point = '0 0 0'
variable = tp0
[]
[tp1]
type = PointValue
point = '0 0 0'
variable = tp1
[]
[tp2]
type = PointValue
point = '0 0 0'
variable = tp2
[]
[]
[Preconditioning]
[basic]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 6
nl_abs_tol = 1E-7
[]
[Outputs]
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/actions/fullsat_brine_except5.i)
# Error checking: attempt to use non-standard pressure_unit with PorousFlowBrine
[Mesh]
type = GeneratedMesh
dim = 1
nx = 1
[]
[GlobalParams]
block = '0'
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[PorousFlowFullySaturated]
porepressure = pp
temperature = 273.15
mass_fraction_vars = nacl
fluid_properties_type = PorousFlowBrine
nacl_name = nacl
pressure_unit = MPa
dictator_name = dictator
stabilization = none
[]
[Variables]
[pp]
initial_condition = 20E6
[]
[nacl]
initial_condition = 0.1047
[]
[]
[Materials]
# Specific heat capacity
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 850
density = 2700
[]
# Permeability
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-13 0 0 0 1E-13 0 0 0 1E-13'
[]
# Porosity
[porosity]
type = PorousFlowPorosityConst
porosity = 0.3
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
(modules/porous_flow/test/tests/jacobian/fflux11.i)
# 1phase, 3components, constant viscosity, constant insitu permeability
# density with constant bulk, VG relative perm with a cubic, nonzero gravity, unsaturated with VG
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[massfrac0]
[]
[massfrac1]
[]
[]
[ICs]
[pp]
type = RandomIC
variable = pp
min = -1.0
max = 0.0
[]
[massfrac0]
type = RandomIC
variable = massfrac0
min = 0
max = 0.3
[]
[massfrac1]
type = RandomIC
variable = massfrac1
min = 0
max = 0.4
[]
[]
[Kernels]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
gravity = '-1 -0.1 0'
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = massfrac0
gravity = '-1 -0.1 0'
[]
[flux2]
type = PorousFlowAdvectiveFlux
fluid_component = 2
variable = massfrac1
gravity = '-1 -0.1 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp massfrac0 massfrac1'
number_fluid_phases = 1
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.6
alpha = 1 # small so that most effective saturations are close to 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac0 massfrac1'
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = PorousFlowRelativePermeabilityVG
m = 0.6
seff_turnover = 0.8
phase = 0
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/dirackernels/pls02reporter.i)
# fully-saturated situation with a poly-line sink with use_mobility=true
# The poly-line consists of 2 points, and has a length
# of 0.5. Each point is weighted with a weight of 0.1
# The PorousFlowPolyLineSink has
# p_or_t_vals = 0 1E7
# fluxes = 0 1
# so that for 0<=porepressure<=1E7
# base flux = porepressure * 1E-6 * mobility (measured in kg.m^-1.s^-1),
# and when multiplied by the poly-line length, and
# the weighting of each point, the mass flux is
# flux = porepressure * 0.5*E-8 * mobility (kg.s^-1).
#
# The fluid and matrix properties are:
# porosity = 0.1
# element volume = 8 m^3
# density = dens0 * exp(P / bulk), with bulk = 2E7
# initial porepressure P0 = 1E7
# viscosity = 0.2
# So, fluid mass = 0.8 * density (kg)
#
# The equation to solve is
# d(Mass)/dt = - porepressure * 0.5*E-8 * density / viscosity
#
# PorousFlow discretises time to conserve mass, so to march
# forward in time, we must solve
# Mass(dt) = Mass(0) - P * 0.5E-8 * density / viscosity * dt
# or
# 0.8 * dens0 * exp(P/bulk) = 0.8 * dens0 * exp(P0/bulk) - P * 0.5E-8 * density / viscosity * dt
# For the numbers written above this gives
# P(t=1) = 6.36947 MPa
# which is given precisely by MOOSE
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[UserObjects]
[pls_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e7
viscosity = 0.2
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[DiracKernels]
[pls]
# This defines a sink that has strength
# f = L(P) * relperm * L_seg
# where
# L(P) is a piecewise-linear function of porepressure
# that is zero at pp=0 and 1 at pp=1E7
# relperm is the relative permeability of the fluid
# L_seg is the line-segment length associated with
# the Dirac points defined in the file pls02.bh
type = PorousFlowPolyLineSink
# Because the Variable for this Sink is pp, and pp is associated
# with the fluid-mass conservation equation, this sink is extracting
# fluid mass (and not heat energy or something else)
variable = pp
# The following specfies that the total fluid mass coming out of
# the porespace via this sink in this timestep should be recorded
# in the pls_total_outflow_mass UserObject
SumQuantityUO = pls_total_outflow_mass
# The following file defines the polyline geometry
# which is just two points in this particular example
weight_reporter='pls02file/w'
x_coord_reporter='pls02file/x'
y_coord_reporter='pls02file/y'
z_coord_reporter='pls02file/z'
# Now define the piecewise-linear function, L
# First, we want L to be a function of porepressure (and not
# temperature or something else). The following means that
# p_or_t_vals should be intepreted by MOOSE as the zeroth-phase
# porepressure
function_of = pressure
fluid_phase = 0
# Second, define the piecewise-linear function, L
# The following means
# flux=0 when pp=0 (and also pp<0)
# flux=1 when pp=1E7 (and also pp>1E7)
# flux=linearly intepolated between pp=0 and pp=1E7
# When flux>0 this means a sink, while flux<0 means a source
p_or_t_vals = '0 1E7'
fluxes = '0 1'
# Finally, in this case we want to always multiply
# L by the fluid mobility (of the zeroth phase) and
# use that in the sink strength instead of the bare L
# computed above
use_mobility = true
[]
[]
[Reporters]
[pls02file]
# contains contents from pls02.bh
type=ConstantReporter
real_vector_names = 'w x y z'
real_vector_values = '0.10 0.10;
0.00 0.00;
0.00 0.00;
-0.25 0.25'
[]
[]
[Postprocessors]
[pls_report]
type = PorousFlowPlotQuantity
uo = pls_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
indirect_dependencies = 'fluid_mass1 fluid_mass0 pls_report'
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
expression = abs((a-c+d)/2/(a+c))
symbol_names = 'a c d'
symbol_values = 'fluid_mass1 fluid_mass0 pls_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 1
dt = 1
solve_type = NEWTON
[]
[Outputs]
exodus = false
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/examples/multiapp_fracture_flow/3dFracture/matrix_app.i)
# 3D matrix app doing thermo-hydro PorousFlow and receiving heat energy via a VectorPostprocessor from the 2D fracture App
[Mesh]
uniform_refine = 0
[generate]
type = GeneratedMeshGenerator
dim = 3
nx = 11
xmin = -10
xmax = 210
ny = 9
ymin = -10
ymax = 160
nz = 11
zmin = -10
zmax = 210
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[matrix_P]
scaling = 1E6
[]
[matrix_T]
initial_condition = 473
[]
[]
[ICs]
[frac_P]
type = FunctionIC
variable = matrix_P
function = insitu_pp
[]
[]
[Functions]
[insitu_pp]
type = ParsedFunction
expression = '10 - 0.847E-2 * z' # Approximate hydrostatic in MPa
[]
[]
[PorousFlowFullySaturated]
coupling_type = ThermoHydro
porepressure = matrix_P
temperature = matrix_T
fp = water
gravity = '0 0 -9.81E-6' # Note the value, because of pressure_unit
pressure_unit = MPa
[]
[DiracKernels]
[heat_from_fracture]
type = ReporterPointSource
variable = matrix_T
value_name = heat_transfer_rate/transferred_joules_per_s
x_coord_name = heat_transfer_rate/x
y_coord_name = heat_transfer_rate/y
z_coord_name = heat_transfer_rate/z
[]
[]
[FluidProperties]
[water]
type = SimpleFluidProperties # this is largely irrelevant here since we care about heat conduction only
thermal_expansion = 0 # to prevent depressurization as the reservoir is cooled
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosityConst
porosity = 1E-3 # small porosity of rock
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-18 0 0 0 1E-18 0 0 0 1E-18'
[]
[internal_energy]
type = PorousFlowMatrixInternalEnergy
density = 2700 # kg/m^3
specific_heat_capacity = 800 # rough guess at specific heat capacity
[]
[aq_thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '5 0 0 0 5 0 0 0 5'
[]
[]
[VectorPostprocessors]
[heat_transfer_rate]
type = ConstantVectorPostprocessor
vector_names = 'transferred_joules_per_s x y z'
value = '0; 0; 0; 0'
outputs = none
[]
[]
[AuxVariables]
[normal_thermal_conductivity]
family = MONOMIAL
order = CONSTANT
[]
[fracture_normal_x]
family = MONOMIAL
order = CONSTANT
initial_condition = 0
[]
[fracture_normal_y]
family = MONOMIAL
order = CONSTANT
initial_condition = 1
[]
[fracture_normal_z]
family = MONOMIAL
order = CONSTANT
initial_condition = 0
[]
[element_normal_length]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[normal_thermal_conductivity_auxk]
type = ConstantAux
variable = normal_thermal_conductivity
value = 5 # very simple in this case
[]
[element_normal_length_auxk]
type = PorousFlowElementLength
variable = element_normal_length
direction = 'fracture_normal_x fracture_normal_y fracture_normal_z'
[]
[]
[Preconditioning]
[entire_jacobian]
type = SMP
full = true
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
[TimeStepper]
type = IterationAdaptiveDT
dt = 1
growth_factor = 1.1
optimal_iterations = 4
[]
dtmax = 1E8
end_time = 1E8
nl_abs_tol = 1E-2
[]
[Outputs]
print_linear_residuals = false
exodus = false
[]
[MultiApps]
[fracture_app]
type = TransientMultiApp
input_files = fracture_only_aperture_changing.i
cli_args = 'Outputs/ex/sync_only=false'
execute_on = TIMESTEP_BEGIN
sub_cycling = true
### catch_up = true
### max_catch_up_steps = 100
[]
[]
[Transfers]
[element_normal_length_to_fracture]
type = MultiAppNearestNodeTransfer
to_multi_app = fracture_app
source_variable = element_normal_length
variable = enclosing_element_normal_length
[]
[element_normal_thermal_cond_to_fracture]
type = MultiAppNearestNodeTransfer
to_multi_app = fracture_app
source_variable = normal_thermal_conductivity
variable = enclosing_element_normal_thermal_cond
[]
[T_to_fracture]
type = MultiAppGeometricInterpolationTransfer
to_multi_app = fracture_app
source_variable = matrix_T
variable = transferred_matrix_T
[]
[normal_x_from_fracture]
type = MultiAppNearestNodeTransfer
from_multi_app = fracture_app
source_variable = normal_dirn_x
variable = fracture_normal_x
[]
[normal_y_from_fracture]
type = MultiAppNearestNodeTransfer
from_multi_app = fracture_app
source_variable = normal_dirn_y
variable = fracture_normal_y
[]
[normal_z_from_fracture]
type = MultiAppNearestNodeTransfer
from_multi_app = fracture_app
source_variable = normal_dirn_z
variable = fracture_normal_z
[]
[heat_from_fracture]
type = MultiAppReporterTransfer
from_multi_app = fracture_app
from_reporters = 'heat_transfer_rate/joules_per_s heat_transfer_rate/x heat_transfer_rate/y heat_transfer_rate/z'
to_reporters = 'heat_transfer_rate/transferred_joules_per_s heat_transfer_rate/x heat_transfer_rate/y heat_transfer_rate/z'
[]
[]
(modules/porous_flow/test/tests/actions/basicthm_borehole.i)
# PorousFlowBasicTHM action with coupling_type = Hydro (no thermal or
# mechanical effects), plus a Peaceman borehole with use_mobility = true
# to test that nodal relative permeability is added by this action.
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[porepressure]
initial_condition = 1e7
[]
[]
[AuxVariables]
[temperature]
initial_condition = 293
[]
[]
[PorousFlowBasicTHM]
porepressure = porepressure
temperature = temperature
coupling_type = Hydro
gravity = '0 0 0'
fp = simple_fluid
multiply_by_density = true
[]
[UserObjects]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[biot_modulus]
type = PorousFlowConstantBiotModulus
biot_coefficient = 1
fluid_bulk_modulus = 2e9
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-13 0 0 0 1e-13 0 0 0 1e-13'
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
variable = porepressure
SumQuantityUO = borehole_total_outflow_mass
point_file = borehole.bh
function_of = pressure
fluid_phase = 0
bottom_p_or_t = 0
unit_weight = '0 0 0'
use_mobility = true
character = 1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1e-10 1e-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 0.1
solve_type = NEWTON
[]
[Outputs]
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/test/tests/actions/fullsat_borehole.i)
# PorousFlowFullySaturated action with coupling_type = ThermoHydro (no
# mechanical effects), plus a Peaceman borehole with use_mobility = true
# to test that nodal relative permeability is added by this action.
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[porepressure]
initial_condition = 1E7
[]
[temperature]
initial_condition = 323.15
[]
[]
[PorousFlowFullySaturated]
coupling_type = ThermoHydro
porepressure = porepressure
temperature = temperature
dictator_name = dictator
stabilization = none
fp = simple_fluid
gravity = '0 0 0'
[]
[BCs]
[temperature]
type = DirichletBC
variable = temperature
boundary = 'left right'
value = 323.15
[]
[]
[UserObjects]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.25
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-13 0 0 0 1e-13 0 0 0 1e-13'
[]
[thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '3 0 0 0 3 0 0 0 3'
wet_thermal_conductivity = '3 0 0 0 3 0 0 0 3'
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 850
density = 2700
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
variable = porepressure
SumQuantityUO = borehole_total_outflow_mass
point_file = borehole.bh
function_of = pressure
fluid_phase = 0
bottom_p_or_t = 0
unit_weight = '0 0 0'
use_mobility = true
character = 1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 0.1
solve_type = NEWTON
[]
[Outputs]
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/test/tests/gravity/grav02f.i)
# Checking that gravity head is established in the transient situation when 0<=saturation<=1 (note the less-than-or-equal-to).
# 2phase (PS), 2components, van Genuchten capillary pressure, constant fluid bulk-moduli for each phase, constant viscosity,
# constant permeability, Corey relative permeabilities with residual saturation
[Mesh]
type = GeneratedMesh
dim = 2
ny = 10
ymax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 -10 0'
[]
[Variables]
[ppwater]
initial_condition = 1.5e6
[]
[sgas]
initial_condition = 0.3
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[ppgas]
family = MONOMIAL
order = CONSTANT
[]
[swater]
family = MONOMIAL
order = CONSTANT
[]
[relpermwater]
family = MONOMIAL
order = CONSTANT
[]
[relpermgas]
family = MONOMIAL
order = CONSTANT
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = ppwater
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = sgas
[]
[]
[AuxKernels]
[ppgas]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = ppgas
[]
[swater]
type = PorousFlowPropertyAux
property = saturation
phase = 0
variable = swater
[]
[relpermwater]
type = MaterialStdVectorAux
property = PorousFlow_relative_permeability_qp
index = 0
variable = relpermwater
[]
[relpermgas]
type = PorousFlowPropertyAux
property = relperm
phase = 1
variable = relpermgas
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater sgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-4
pc_max = 2e5
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
viscosity = 1e-3
thermal_expansion = 0
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 10
viscosity = 1e-5
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = ppwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-11 0 0 0 1e-11 0 0 0 1e-11'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.25
sum_s_res = 0.35
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
s_res = 0.1
sum_s_res = 0.35
[]
[]
[Postprocessors]
[mass_ph0]
type = PorousFlowFluidMass
fluid_component = 0
execute_on = 'initial timestep_end'
[]
[mass_ph1]
type = PorousFlowFluidMass
fluid_component = 1
execute_on = 'initial timestep_end'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_stol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-13 15'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1e5
[TimeStepper]
type = IterationAdaptiveDT
dt = 1e4
[]
[]
[Outputs]
execute_on = 'initial timestep_end'
file_base = grav02f
exodus = true
perf_graph = true
csv = false
[]
(modules/porous_flow/test/tests/flux_limited_TVD_pflow/jacobian_05.i)
# Checking the Jacobian of Flux-Limited TVD Advection, 2 phases, 2 components, using flux_limiter_type != None
#
# Here we use snes_check_jacobian instead of snes_type=test. The former just checks the Jacobian for the
# random initial conditions, while the latter checks for u=1 and u=-1
#
# The Jacobian is correct for u=1 and u=-1, but the finite-difference scheme used by snes_type=test gives the
# wrong answer.
# For u=constant, the Kuzmin-Turek scheme adds as much antidiffusion as possible, resulting in a central-difference
# version of advection (flux_limiter = 1). This is correct, and the Jacobian is calculated correctly.
# However, when computing the Jacobian using finite differences, u is increased or decreased at a node.
# This results in that node being at a maximum or minimum, which means no antidiffusion should be added
# (flux_limiter = 0). This corresponds to a full-upwind scheme. So the finite-difference computes the
# Jacobian in the full-upwind scenario, which is incorrect (the original residual = 0, after finite-differencing
# the residual comes from the full-upwind scenario).
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 5
[]
[GlobalParams]
gravity = '1.1 2 -0.5'
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[massfrac_ph0_sp0]
[]
[massfrac_ph1_sp0]
[]
[]
[ICs]
[ppwater]
type = FunctionIC
variable = ppwater
function = 'if(x<1,0,if(x<4,sin(x-1),1))'
[]
[ppgas]
type = FunctionIC
variable = ppgas
function = 'x*(6-x)/6'
[]
[massfrac_ph0_sp0]
type = FunctionIC
variable = massfrac_ph0_sp0
function = 'x/6'
[]
[massfrac_ph1_sp0]
type = FunctionIC
variable = massfrac_ph1_sp0
function = '1-x/7'
[]
[]
[Kernels]
[flux_ph0_sp0]
type = PorousFlowFluxLimitedTVDAdvection
variable = ppwater
advective_flux_calculator = advective_flux_calculator_ph0_sp0
[]
[flux_ph0_sp1]
type = PorousFlowFluxLimitedTVDAdvection
variable = ppgas
advective_flux_calculator = advective_flux_calculator_ph0_sp1
[]
[flux_ph1_sp0]
type = PorousFlowFluxLimitedTVDAdvection
variable = massfrac_ph0_sp0
advective_flux_calculator = advective_flux_calculator_ph1_sp0
[]
[flux_ph1_sp1]
type = PorousFlowFluxLimitedTVDAdvection
variable = massfrac_ph1_sp0
advective_flux_calculator = advective_flux_calculator_ph1_sp1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1.4
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas massfrac_ph0_sp0 massfrac_ph1_sp0'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1
m = 0.5
[]
[advective_flux_calculator_ph0_sp0]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
flux_limiter_type = minmod
phase = 0
fluid_component = 0
[]
[advective_flux_calculator_ph0_sp1]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
flux_limiter_type = vanleer
phase = 0
fluid_component = 1
[]
[advective_flux_calculator_ph1_sp0]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
flux_limiter_type = mc
phase = 1
fluid_component = 0
[]
[advective_flux_calculator_ph1_sp1]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
flux_limiter_type = superbee
phase = 1
fluid_component = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.21 0 0 0 1.5 0 0 0 0.8'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options = '-snes_check_jacobian'
[]
[]
[Executioner]
type = Transient
solve_type = Linear # this is to force convergence even though the nonlinear residual is high: we just care about the Jacobian in this test
end_time = 1
num_steps = 1
dt = 1
[]
(modules/porous_flow/test/tests/sinks/s04.i)
# apply a piecewise-linear sink flux and observe the correct behavior
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = 0
xmax = 1
ymin = 0
ymax = 1
zmin = 0
zmax = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Variables]
[pp]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = y+1
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.3
density0 = 1.1
thermal_expansion = 0
viscosity = 1.1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-5 0 0 0 1E-5 0 0 0 1E-5'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[AuxVariables]
[flux_out]
[]
[xval]
[]
[yval]
[]
[pt_shift]
initial_condition = 0.3
[]
[]
[ICs]
[xval]
type = FunctionIC
variable = xval
function = x
[]
[yval]
type = FunctionIC
variable = yval
function = y
[]
[]
[Postprocessors]
[p00]
type = PointValue
point = '0 0 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[p10]
type = PointValue
point = '1 0 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[m10]
type = ParsedPostprocessor
expression = 'vol*por*dens0*exp(p10/bulk)'
constant_names = 'vol por dens0 bulk'
constant_expressions = '0.25 0.1 1.1 1.3'
pp_names = p10
execute_on = 'initial timestep_end'
[]
[dm10]
type = ChangeOverTimePostprocessor
postprocessor = m10
outputs = none
[]
[m10_prev]
type = ParsedPostprocessor
expression = 'm10 - dm10'
pp_names = 'm10 dm10'
outputs = 'console'
[]
[m10_rate]
type = ParsedPostprocessor
expression = 'fcn*if(p10>0.8,1,if(p10<0.3,0.5,0.2+p10))'
constant_names = 'fcn'
constant_expressions = '8'
pp_names = 'p10'
[]
[m10_expect]
type = ParsedPostprocessor
expression = 'm10_prev-m10_rate*area*dt'
constant_names = 'area dt'
constant_expressions = '0.5 1E-3'
pp_names = 'm10_prev m10_rate'
[]
[p01]
type = PointValue
point = '0 1 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[p11]
type = PointValue
point = '1 1 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[m11]
type = ParsedPostprocessor
expression = 'vol*por*dens0*exp(p11/bulk)'
constant_names = 'vol por dens0 bulk'
constant_expressions = '0.25 0.1 1.1 1.3'
pp_names = 'p11'
execute_on = 'initial timestep_end'
[]
[dm11]
type = ChangeOverTimePostprocessor
postprocessor = m11
outputs = none
[]
[m11_prev]
type = ParsedPostprocessor
expression = 'm11 - dm11'
pp_names = 'm11 dm11'
outputs = 'console'
[]
[m11_rate]
type = ParsedPostprocessor
expression = 'fcn*if(p11>0.8,1,if(p11<0.3,0.5,0.2+p11))'
constant_names = 'fcn'
constant_expressions = '8'
pp_names = 'p11'
[]
[m11_expect]
type = ParsedPostprocessor
expression = 'm11_prev-m11_rate*area*dt'
constant_names = 'area dt'
constant_expressions = '0.5 1E-3'
pp_names = 'm11_prev m11_rate'
[]
[]
[BCs]
[flux]
type = PorousFlowPiecewiseLinearSink
boundary = 'right'
PT_shift = pt_shift
pt_vals = '0.0 0.5'
multipliers = '0.5 1'
variable = pp
use_mobility = false
use_relperm = false
fluid_phase = 0
flux_function = 8
save_in = flux_out
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_max_it -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu 10000 NONZERO 2'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E-3
end_time = 1E-2
nl_rel_tol = 1E-12
nl_abs_tol = 1E-12
[]
[Outputs]
file_base = s04
[console]
type = Console
execute_on = 'nonlinear linear'
[]
[csv]
type = CSV
execute_on = 'timestep_end'
[]
[]
(modules/porous_flow/test/tests/hysteresis/except07.i)
# Exception testing of PorousFlowHysteresisOrder
# Incorrectly ordered previous_turning_points
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[]
[PorousFlowBasicTHM]
porepressure = pp
fp = simple_fluid
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[biot_modulus]
type = PorousFlowConstantBiotModulus
biot_coefficient = 0.8
solid_bulk_compliance = 2e-7
fluid_bulk_modulus = 1e7
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-13 0 0 0 1e-13 0 0 0 1e-13'
[]
[hys_order]
type = PorousFlowHysteresisOrder
initial_order = 3
previous_turning_points = '0.6 0.8 0.9'
[]
[]
[Preconditioning]
[basic]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
(modules/porous_flow/test/tests/hysteresis/except09.i)
# Exception testing of PorousFlowPropertyAux
# hystresis_turning_point too large
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[]
[PorousFlowBasicTHM]
porepressure = pp
fp = simple_fluid
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[biot_modulus]
type = PorousFlowConstantBiotModulus
biot_coefficient = 0.8
solid_bulk_compliance = 2e-7
fluid_bulk_modulus = 1e7
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-13 0 0 0 1e-13 0 0 0 1e-13'
[]
[hys_order]
type = PorousFlowHysteresisOrder
[]
[]
[AuxVariables]
[tp]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[tp]
type = PorousFlowPropertyAux
variable = tp
property = hysteresis_saturation_turning_point
hysteresis_turning_point = 3
[]
[]
[Preconditioning]
[basic]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
(modules/porous_flow/test/tests/newton_cooling/nc02.i)
# Newton cooling from a bar. 1-phase steady
[Mesh]
type = GeneratedMesh
dim = 2
nx = 1000
ny = 1
xmin = 0
xmax = 100
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pressure'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.8
alpha = 1e-5
[]
[]
[Variables]
[pressure]
[]
[]
[ICs]
[pressure]
type = FunctionIC
variable = pressure
function = '(2-x/100)*1E6'
[]
[]
[Kernels]
[flux]
type = PorousFlowAdvectiveFlux
fluid_component = 0
gravity = '0 0 0'
variable = pressure
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1e6
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-15'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey # irrelevant in this fully-saturated situation
n = 2
phase = 0
[]
[]
[BCs]
[left]
type = DirichletBC
variable = pressure
boundary = left
value = 2E6
[]
[newton]
type = PorousFlowPiecewiseLinearSink
variable = pressure
boundary = right
pt_vals = '0 100000 200000 300000 400000 500000 600000 700000 800000 900000 1000000 1100000 1200000 1300000 1400000 1500000 1600000 1700000 1800000 1900000 2000000'
multipliers = '0. 5.6677197748570516e-6 0.000011931518841831313 0.00001885408740732065 0.000026504708864284114 0.000034959953203725676 0.000044304443352900224 0.00005463170211001232 0.00006604508815181467 0.00007865883048198513 0.00009259917167338928 0.00010800563134618119 0.00012503240252705603 0.00014384989486488752 0.00016464644014777016 0.00018763017719085535 0.0002130311349595711 0.00024110353477682344 0.00027212833465544285 0.00030641604122040985 0.00034430981736352295'
use_mobility = false
use_relperm = false
fluid_phase = 0
flux_function = 1
[]
[]
[VectorPostprocessors]
[porepressure]
type = LineValueSampler
variable = pressure
start_point = '0 0.5 0'
end_point = '100 0.5 0'
sort_by = x
num_points = 20
execute_on = timestep_end
[]
[]
[Preconditioning]
active = 'andy'
[andy]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_max_it -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol '
petsc_options_value = 'gmres asm lu 100 NONZERO 2 1E-12 1E-15'
[]
[]
[Executioner]
type = Steady
[]
[Outputs]
file_base = nc02
execute_on = timestep_end
exodus = false
[along_line]
type = CSV
execute_vector_postprocessors_on = timestep_end
[]
[]
(modules/porous_flow/test/tests/numerical_diffusion/no_action.i)
# Using upwinded and mass-lumped PorousFlow Kernels: this is equivalent of fully_saturated_action.i with stabilization = Full
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
xmin = 0
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[porepressure]
[]
[tracer]
[]
[]
[ICs]
[porepressure]
type = FunctionIC
variable = porepressure
function = '1 - x'
[]
[tracer]
type = FunctionIC
variable = tracer
function = 'if(x<0.1,0,if(x>0.3,0,1))'
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = tracer
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = tracer
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = porepressure
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = porepressure
[]
[]
[BCs]
[constant_injection_porepressure]
type = DirichletBC
variable = porepressure
value = 1
boundary = left
[]
[no_tracer_on_left]
type = DirichletBC
variable = tracer
value = 0
boundary = left
[]
[remove_component_1]
type = PorousFlowPiecewiseLinearSink
variable = porepressure
boundary = right
fluid_phase = 0
pt_vals = '0 1E3'
multipliers = '0 1E3'
mass_fraction_component = 1
use_mobility = true
flux_function = 1E3
[]
[remove_component_0]
type = PorousFlowPiecewiseLinearSink
variable = tracer
boundary = right
fluid_phase = 0
pt_vals = '0 1E3'
multipliers = '0 1E3'
mass_fraction_component = 0
use_mobility = true
flux_function = 1E3
[]
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2E9
thermal_expansion = 0
viscosity = 1.0
density0 = 1000.0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure tracer'
number_fluid_phases = 1
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = porepressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = tracer
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = the_simple_fluid
phase = 0
[]
[relperm]
type = PorousFlowRelativePermeabilityConst
phase = 0
[]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-2 0 0 0 1E-2 0 0 0 1E-2'
[]
[]
[Preconditioning]
active = basic
[basic]
type = SMP
full = true
petsc_options = '-ksp_diagonal_scale -ksp_diagonal_scale_fix'
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = ' asm lu NONZERO 2'
[]
[preferred_but_might_not_be_installed]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu mumps'
[]
[]
[VectorPostprocessors]
[tracer]
type = LineValueSampler
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 101
sort_by = x
variable = tracer
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 6
dt = 6E-1
nl_abs_tol = 1E-8
timestep_tolerance = 1E-3
[]
[Outputs]
[out]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/test/tests/jacobian/fflux06.i)
# 1phase with MD_Gaussian (var = log(mass-density) with Gaussian capillary) formulation
# constant viscosity, constant insitu permeability
# density with constant bulk, Corey relative perm, nonzero gravity
# unsaturated
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[md]
[]
[]
[ICs]
[md]
type = RandomIC
min = -1
max = -0.224 # unsaturated for md<log(density_P0=0.8)=-0.223
variable = md
[]
[]
[Kernels]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = md
gravity = '-1 -0.1 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'md'
number_fluid_phases = 1
number_fluid_components = 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseMD_Gaussian
mass_density = md
al = 1.1
density_P0 = 0.8
bulk_modulus = 1.5
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/sinks/s07.i)
# apply a sink flux on just one component of a 3-component system and observe the correct behavior
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = 0
xmax = 1
ymin = 0
ymax = 1
zmin = 0
zmax = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp frac0 frac1'
number_fluid_phases = 1
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1.1
[]
[]
[Variables]
[pp]
[]
[frac0]
initial_condition = 0.1
[]
[frac1]
initial_condition = 0.6
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = y
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = frac0
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = frac1
[]
[mass2]
type = PorousFlowMassTimeDerivative
fluid_component = 2
variable = pp
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.3
density0 = 1.1
thermal_expansion = 0
viscosity = 1.1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'frac0 frac1'
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0.2 0 0 0 0.1 0 0 0 0.1'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[AuxVariables]
[flux_out]
[]
[]
[Postprocessors]
[f1_00]
type = PointValue
point = '0 0 0'
variable = frac1
execute_on = 'initial timestep_end'
[]
[flux_00]
type = PointValue
point = '0 0 0'
variable = flux_out
execute_on = 'initial timestep_end'
[]
[p00]
type = PointValue
point = '0 0 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[m1_00]
type = ParsedPostprocessor
expression = 'f1_00*vol*por*dens0*exp(p00/bulk)*pow(1+pow(-al*p00,1.0/(1-m)),-m)'
constant_names = 'vol por dens0 bulk al m'
constant_expressions = '0.25 0.1 1.1 1.3 1.1 0.5'
pp_names = 'f1_00 p00'
execute_on = 'initial timestep_end'
[]
[dm1_00]
type = ChangeOverTimePostprocessor
postprocessor = m1_00
outputs = none
[]
[m1_00_prev]
type = ParsedPostprocessor
expression = 'm1_00 - dm1_00'
pp_names = 'm1_00 dm1_00'
outputs = 'console'
[]
[del_m1_00]
type = ParsedPostprocessor
expression = 'f1_00*fcn*area*dt'
constant_names = 'fcn area dt'
constant_expressions = '6 0.5 1E-3'
pp_names = 'f1_00'
outputs = 'console'
[]
[m1_00_expect]
type = ParsedPostprocessor
expression = 'm1_00_prev-del_m1_00'
pp_names = 'm1_00_prev del_m1_00'
[]
[f1_01]
type = PointValue
point = '0 1 0'
variable = frac1
execute_on = 'initial timestep_end'
[]
[flux_01]
type = PointValue
point = '0 1 0'
variable = flux_out
execute_on = 'initial timestep_end'
[]
[p01]
type = PointValue
point = '0 1 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[m1_01]
type = ParsedPostprocessor
expression = 'f1_01*vol*por*dens0*exp(p01/bulk)*pow(1+pow(-al*p01,1.0/(1-m)),-m)'
constant_names = 'vol por dens0 bulk al m'
constant_expressions = '0.25 0.1 1.1 1.3 1.1 0.5'
pp_names = 'f1_01 p01'
execute_on = 'initial timestep_end'
[]
[dm1_01]
type = ChangeOverTimePostprocessor
postprocessor = m1_01
outputs = none
[]
[m1_01_prev]
type = ParsedPostprocessor
expression = 'm1_01 - dm1_01'
pp_names = 'm1_01 dm1_01'
outputs = 'console'
[]
[del_m1_01]
type = ParsedPostprocessor
expression = 'f1_01*fcn*area*dt'
constant_names = 'fcn area dt'
constant_expressions = '6 0.5 1E-3'
pp_names = 'f1_01'
outputs = 'console'
[]
[m1_01_expect]
type = ParsedPostprocessor
expression = 'm1_01_prev-del_m1_01'
pp_names = 'm1_01_prev del_m1_01'
[]
[f1_11]
type = PointValue
point = '1 1 0'
variable = frac1
execute_on = 'initial timestep_end'
[]
[flux_11]
type = PointValue
point = '1 1 0'
variable = flux_out
execute_on = 'initial timestep_end'
[]
[p11]
type = PointValue
point = '1 1 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[]
[BCs]
[flux]
type = PorousFlowSink
boundary = 'left'
variable = frac1
use_mobility = false
use_relperm = false
mass_fraction_component = 1
fluid_phase = 0
flux_function = 6
save_in = flux_out
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_max_it -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu 10 NONZERO 2'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E-3
end_time = 0.01
nl_rel_tol = 1E-12
nl_abs_tol = 1E-12
[]
[Outputs]
file_base = s07
[console]
type = Console
execute_on = 'nonlinear linear'
[]
[csv]
type = CSV
execute_on = 'timestep_end'
[]
[]
(modules/porous_flow/test/tests/jacobian/fflux03.i)
# 2phase (PP), 2components (that exist in both phases), constant viscosity, constant insitu permeability
# density with constant bulk, Corey relative perm, nonzero gravity, unsaturated with vanGenuchten
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
[]
[massfrac_ph1_sp0]
[]
[]
[ICs]
[ppwater]
type = RandomIC
variable = ppwater
min = -1
max = 0
[]
[ppgas]
type = RandomIC
variable = ppgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 1
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 1
[]
[]
[Kernels]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = ppwater
gravity = '-1 -0.1 0'
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = ppgas
gravity = '-1 -0.1 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/dirackernels/bh_except02.i)
# PorousFlowPeacemanBorehole exception test
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = TimeDerivative
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
bottom_p_or_t = 0
fluid_phase = 0
mass_fraction_component = 1
point_file = bh02.bh
SumQuantityUO = borehole_total_outflow_mass
variable = pp
unit_weight = '0 0 0'
character = 1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
expression = abs((a-c+d)/2/(a+c))
symbol_names = 'a c d'
symbol_values = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
(modules/porous_flow/test/tests/hysteresis/relperm_jac_1.i)
# Test of derivatives computed in PorousFlowHystereticRelativePermeability classes along first-order curve
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '-1 0 0'
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
number_fluid_phases = 2
number_fluid_components = 2
porous_flow_vars = 'pp0 sat1'
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 10.0
m = 0.33
[]
[]
[Variables]
[pp0]
[]
[sat1]
initial_condition = 0.5
[]
[]
[Kernels]
[mass_conservation0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp0
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp0
[]
[mass_conservation1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sat1
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = sat1
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[]
[FluidProperties]
[simple_fluid_0]
type = SimpleFluidProperties
bulk_modulus = 10
viscosity = 1
[]
[simple_fluid_1]
type = SimpleFluidProperties
bulk_modulus = 1
viscosity = 3
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[temperature]
type = PorousFlowTemperature
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid_0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid_1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 1 0 0 0 1'
[]
[pc_calculator]
type = PorousFlow2PhasePS
capillary_pressure = pc
phase0_porepressure = pp0
phase1_saturation = sat1
[]
[hys_order_material]
type = PorousFlowHysteresisOrder
initial_order = 1
previous_turning_points = 0.3
[]
[relperm_liquid]
type = PorousFlowHystereticRelativePermeabilityLiquid
phase = 0
S_lr = 0.1
S_gr_max = 0.2
m = 0.9
liquid_modification_range = 0.9
[]
[relperm_gas]
type = PorousFlowHystereticRelativePermeabilityGas
phase = 1
S_lr = 0.1
S_gr_max = 0.2
m = 0.9
gamma = 0.33
k_rg_max = 0.8
gas_low_extension_type = linear_like
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options = '-snes_check_jacobian'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
(modules/porous_flow/test/tests/numerical_diffusion/pffltvd.i)
# Using flux-limited TVD advection ala Kuzmin and Turek, employing PorousFlow Kernels and UserObjects, with superbee flux-limiter
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
xmin = 0
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[porepressure]
[]
[tracer]
[]
[]
[ICs]
[porepressure]
type = FunctionIC
variable = porepressure
function = '1 - x'
[]
[tracer]
type = FunctionIC
variable = tracer
function = 'if(x<0.1,0,if(x>0.3,0,1))'
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = tracer
[]
[flux0]
type = PorousFlowFluxLimitedTVDAdvection
variable = tracer
advective_flux_calculator = advective_flux_calculator_0
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = porepressure
[]
[flux1]
type = PorousFlowFluxLimitedTVDAdvection
variable = porepressure
advective_flux_calculator = advective_flux_calculator_1
[]
[]
[BCs]
[constant_injection_porepressure]
type = DirichletBC
variable = porepressure
value = 1
boundary = left
[]
[no_tracer_on_left]
type = DirichletBC
variable = tracer
value = 0
boundary = left
[]
[remove_component_1]
type = PorousFlowPiecewiseLinearSink
variable = porepressure
boundary = right
fluid_phase = 0
pt_vals = '0 1E3'
multipliers = '0 1E3'
mass_fraction_component = 1
use_mobility = true
flux_function = 1E3
[]
[remove_component_0]
type = PorousFlowPiecewiseLinearSink
variable = tracer
boundary = right
fluid_phase = 0
pt_vals = '0 1E3'
multipliers = '0 1E3'
mass_fraction_component = 0
use_mobility = true
flux_function = 1E3
[]
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2E9
thermal_expansion = 0
viscosity = 1.0
density0 = 1000.0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure tracer'
number_fluid_phases = 1
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
[]
[advective_flux_calculator_0]
type = PorousFlowAdvectiveFluxCalculatorSaturatedMultiComponent
flux_limiter_type = superbee
fluid_component = 0
[]
[advective_flux_calculator_1]
type = PorousFlowAdvectiveFluxCalculatorSaturatedMultiComponent
flux_limiter_type = superbee
fluid_component = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = porepressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = tracer
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = the_simple_fluid
phase = 0
[]
[relperm]
type = PorousFlowRelativePermeabilityConst
phase = 0
[]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-2 0 0 0 1E-2 0 0 0 1E-2'
[]
[]
[Preconditioning]
active = basic
[basic]
type = SMP
full = true
petsc_options = '-ksp_diagonal_scale -ksp_diagonal_scale_fix'
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = ' asm lu NONZERO 2'
[]
[preferred_but_might_not_be_installed]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu mumps'
[]
[]
[VectorPostprocessors]
[tracer]
type = LineValueSampler
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 101
sort_by = x
variable = tracer
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 6
dt = 6E-2
nl_abs_tol = 1E-8
timestep_tolerance = 1E-3
[]
[Outputs]
[out]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/test/tests/gravity/grav02a.i)
# Checking that gravity head is established in the transient situation when 0<saturation<1 (note the strictly less-than).
# 2phase (PP), 2components, vanGenuchten, constant fluid bulk-moduli for each phase, constant viscosity, constant permeability, Corey relative perm
# For better agreement with the analytical solution (ana_pp), just increase nx
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = -1
xmax = 0
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
initial_condition = -1.0
[]
[ppgas]
initial_condition = 0
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = ppwater
gravity = '-1 0 0'
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = ppgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = ppgas
gravity = '-1 0 0'
[]
[]
[Functions]
[ana_ppwater]
type = ParsedFunction
symbol_names = 'g B p0 rho0'
symbol_values = '1 2 pp_water_top 1'
expression = '-B*log(exp(-p0/B)+g*rho0*x/B)' # expected pp at base
[]
[ana_ppgas]
type = ParsedFunction
symbol_names = 'g B p0 rho0'
symbol_values = '1 1 pp_gas_top 0.1'
expression = '-B*log(exp(-p0/B)+g*rho0*x/B)' # expected pp at base
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2
density0 = 1
viscosity = 1
thermal_expansion = 0
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 0.1
viscosity = 0.5
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 1
[]
[]
[Postprocessors]
[pp_water_top]
type = PointValue
variable = ppwater
point = '0 0 0'
[]
[pp_water_base]
type = PointValue
variable = ppwater
point = '-1 0 0'
[]
[pp_water_analytical]
type = FunctionValuePostprocessor
function = ana_ppwater
point = '-1 0 0'
[]
[pp_gas_top]
type = PointValue
variable = ppgas
point = '0 0 0'
[]
[pp_gas_base]
type = PointValue
variable = ppgas
point = '-1 0 0'
[]
[pp_gas_analytical]
type = FunctionValuePostprocessor
function = ana_ppgas
point = '-1 0 0'
[]
[mass_ph0]
type = PorousFlowFluidMass
fluid_component = 0
execute_on = 'initial timestep_end'
[]
[mass_ph1]
type = PorousFlowFluidMass
fluid_component = 1
execute_on = 'initial timestep_end'
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 0.1
end_time = 1.0
nl_rel_tol = 1E-10
nl_abs_tol = 1E-12
[]
[Outputs]
[csv]
type = CSV
file_base = grav02a
execute_on = 'initial final'
[]
[]
(modules/porous_flow/test/tests/sinks/s15.i)
# Apply a PorousFlowPointSourceFromPostprocessor that injects 1J/s into a 2D model, and PorousFlowOutflowBCs to the outer boundaries to show that the PorousFlowOutflowBCs allow heat-energy to exit freely at the appropriate rate
[Mesh]
type = GeneratedMesh
dim = 2
nx = 3
xmin = -1
xmax = 1
ny = 2
ymin = -2
ymax = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[pp]
[]
[T]
scaling = 1E-7
[]
[]
[PorousFlowFullySaturated]
fp = simple_fluid
coupling_type = thermohydro
porepressure = pp
temperature = T
[]
[DiracKernels]
[injection]
type = PorousFlowPointSourceFromPostprocessor
mass_flux = 1
point = '0 0 0'
variable = T
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.12
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0.4 0 0 0 0.4 0 0 0 0.4'
[]
[matrix]
type = PorousFlowMatrixInternalEnergy
density = 0.15
specific_heat_capacity = 1.5
[]
[thermal_cond]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '0.3 0 0 0 0.3 0 0 0 0.3'
[]
[]
[BCs]
[outflow]
type = PorousFlowOutflowBC
boundary = 'left right top bottom'
flux_type = heat
variable = T
save_in = nodal_outflow
[]
[]
[AuxVariables]
[nodal_outflow]
[]
[]
[Postprocessors]
[outflow_J_per_s]
type = NodalSum
boundary = 'left right top bottom'
variable = nodal_outflow
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 2E6
end_time = 2E7
nl_abs_tol = 1E-14
# nl_rel_tol = 1E-12
[]
[Outputs]
csv = true
[]
(modules/porous_flow/test/tests/sinks/injection_production_eg_outflowBC.i)
# phase = 0 is liquid phase
# phase = 1 is gas phase
# fluid_component = 0 is water
# fluid_component = 1 is CO2
# Constant rates of water and CO2 injection into the left boundary
# 1D mesh
# The PorousFlowOutflowBCs remove the correct water and CO2 from the right boundary
[Mesh]
type = GeneratedMesh
dim = 1
nx = 20
xmax = 20
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[AuxVariables]
[saturation_gas]
order = CONSTANT
family = MONOMIAL
[]
[frac_water_in_liquid]
initial_condition = 1.0
[]
[frac_water_in_gas]
initial_condition = 0.0
[]
[water_kg_per_s]
[]
[co2_kg_per_s]
[]
[]
[AuxKernels]
[saturation_gas]
type = PorousFlowPropertyAux
variable = saturation_gas
property = saturation
phase = 1
execute_on = timestep_end
[]
[]
[Variables]
[pwater]
initial_condition = 20E6
[]
[pgas]
initial_condition = 21E6
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pwater
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = pgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = pgas
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas pwater'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1E-6
m = 0.6
[]
[]
[FluidProperties]
[true_water]
type = Water97FluidProperties
[]
[tabulated_water]
type = TabulatedBicubicFluidProperties
fp = true_water
temperature_min = 275
pressure_max = 1E8
interpolated_properties = 'density viscosity enthalpy internal_energy'
fluid_property_output_file = water97_tabulated_11.csv
# Comment out the fp parameter and uncomment below to use the newly generated tabulation
# fluid_property_file = water97_tabulated_11.csv
[]
[true_co2]
type = CO2FluidProperties
[]
[tabulated_co2]
type = TabulatedBicubicFluidProperties
fp = true_co2
temperature_min = 275
pressure_max = 1E8
interpolated_properties = 'density viscosity enthalpy internal_energy'
fluid_property_output_file = co2_tabulated_11.csv
# Comment out the fp parameter and uncomment below to use the newly generated tabulation
# fluid_property_file = co2_tabulated_11.csv
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 293.15
[]
[saturation_calculator]
type = PorousFlow2PhasePP
phase0_porepressure = pwater
phase1_porepressure = pgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'frac_water_in_liquid frac_water_in_gas'
[]
[water]
type = PorousFlowSingleComponentFluid
fp = tabulated_water
phase = 0
[]
[co2]
type = PorousFlowSingleComponentFluid
fp = tabulated_co2
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.1
sum_s_res = 0.2
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityBC
nw_phase = true
lambda = 2
s_res = 0.1
sum_s_res = 0.2
phase = 1
[]
[]
[BCs]
[water_injection]
type = PorousFlowSink
boundary = left
variable = pwater # pwater is associated with the water mass balance (fluid_component = 0 in its Kernels)
flux_function = -1E-5 # negative means a source, rather than a sink
[]
[co2_injection]
type = PorousFlowSink
boundary = left
variable = pgas # pgas is associated with the CO2 mass balance (fluid_component = 1 in its Kernels)
flux_function = -2E-5 # negative means a source, rather than a sink
[]
[right_water_component0]
type = PorousFlowOutflowBC
boundary = right
variable = pwater
mass_fraction_component = 0
save_in = water_kg_per_s
[]
[right_co2_component1]
type = PorousFlowOutflowBC
boundary = right
variable = pgas
mass_fraction_component = 1
save_in = co2_kg_per_s
[]
[]
[Preconditioning]
active = 'basic'
[basic]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu NONZERO 2'
[]
[preferred]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu mumps'
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
nl_abs_tol = 1E-10
nl_rel_tol = 1E-10
end_time = 1E5
[TimeStepper]
type = IterationAdaptiveDT
dt = 1E5
growth_factor = 1.1
[]
[]
[Postprocessors]
[water_kg_per_s]
type = NodalSum
boundary = right
variable = water_kg_per_s
[]
[co2_kg_per_s]
type = NodalSum
boundary = right
variable = co2_kg_per_s
[]
[]
[VectorPostprocessors]
[pps]
type = LineValueSampler
start_point = '0 0 0'
end_point = '20 0 0'
num_points = 20
sort_by = x
variable = 'pgas pwater saturation_gas'
[]
[]
[Outputs]
[out]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/test/tests/basic_advection/except2.i)
# PorousFlowDarcyVelocityMaterial attempts to have at_nodes = true
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
xmin = 0
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[u]
[]
[]
[AuxVariables]
[P]
[]
[]
[ICs]
[P]
type = FunctionIC
variable = P
function = '2*(1-x)'
[]
[u]
type = FunctionIC
variable = u
function = 'if(x<0.1,1,0)'
[]
[]
[Kernels]
[u_dot]
type = TimeDerivative
variable = u
[]
[u_advection]
type = PorousFlowBasicAdvection
variable = u
phase = 1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = ''
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureConst
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 4
thermal_expansion = 0
viscosity = 150.0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = P
capillary_pressure = pc
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '5 0 0 0 5 0 0 0 5'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0
phase = 0
[]
[darcy_velocity]
type = PorousFlowDarcyVelocityMaterial
gravity = '0.25 0 0'
at_nodes = true
[]
[]
[BCs]
[left]
type = DirichletBC
boundary = left
value = 1
variable = u
[]
[right]
type = DirichletBC
boundary = right
value = 0
variable = u
[]
[]
[Preconditioning]
[basic]
type = SMP
full = true
petsc_options_iname = '-pc_type -snes_rtol'
petsc_options_value = ' lu 1E-10'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 5
[]
[Outputs]
exodus = true
print_linear_residuals = false
[]
(modules/porous_flow/test/tests/jacobian/diff02.i)
# Test the Jacobian of the diffusive component of the PorousFlowDisperiveFlux kernel for two phases.
# By setting disp_long and disp_trans to zero, the purely diffusive component of the flux
# can be isolated. Uses constant tortuosity and diffusion coefficients
[Mesh]
type = GeneratedMesh
dim = 2
nx = 3
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[sgas]
[]
[massfrac0]
[]
[]
[AuxVariables]
[massfrac1]
[]
[]
[ICs]
[sgas]
type = RandomIC
variable = sgas
max = 1
min = 0
[]
[massfrac0]
type = RandomIC
variable = massfrac0
min = 0
max = 1
[]
[massfrac1]
type = RandomIC
variable = massfrac1
min = 0
max = 1
[]
[]
[Kernels]
[diff0]
type = PorousFlowDispersiveFlux
fluid_component = 0
variable = sgas
gravity = '1 0 0'
disp_long = '0 0'
disp_trans = '0 0'
[]
[diff1]
type = PorousFlowDispersiveFlux
fluid_component = 1
variable = massfrac0
gravity = '1 0 0'
disp_long = '0 0'
disp_trans = '0 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'sgas massfrac0'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1e7
density0 = 10
thermal_expansion = 0
viscosity = 1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 1e7
density0 = 1
thermal_expansion = 0
viscosity = 0.1
[]
[]
[Materials]
[temp]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = 1
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac0 massfrac1'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[poro]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[diff]
type = PorousFlowDiffusivityConst
diffusion_coeff = '1e-2 1e-1 1e-2 1e-1'
tortuosity = '0.1 0.2'
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityConst
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityConst
phase = 1
[]
[]
[Preconditioning]
active = smp
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/mass_conservation/mass04.i)
# The sample is a single unit element, with roller BCs on the sides
# and bottom. A constant displacement is applied to the top: disp_z = -0.01*t.
# There is no fluid flow.
# Fluid mass conservation is checked.
#
# Under these conditions
# porepressure = porepressure(t=0) - (Fluid bulk modulus)*log(1 - 0.01*t)
# stress_xx = (bulk - 2*shear/3)*disp_z/L (remember this is effective stress)
# stress_zz = (bulk + 4*shear/3)*disp_z/L (remember this is effective stress)
# where L is the height of the sample (L=1 in this test)
#
# Parameters:
# Bulk modulus = 2
# Shear modulus = 1.5
# fluid bulk modulus = 0.5
# initial porepressure = 0.1
#
# Desired output:
# zdisp = -0.01*t
# p0 = 0.1 - 0.5*log(1-0.01*t)
# stress_xx = stress_yy = -0.01*t
# stress_zz = -0.04*t
#
# Regarding the "log" - it comes from preserving fluid mass
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -0.5
xmax = 0.5
ymin = -0.5
ymax = 0.5
zmin = -0.5
zmax = 0.5
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
PorousFlowDictator = dictator
block = 0
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[porepressure]
initial_condition = 0.1
[]
[]
[BCs]
[confinex]
type = DirichletBC
variable = disp_x
value = 0
boundary = 'left right'
[]
[confiney]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'bottom top'
[]
[basefixed]
type = DirichletBC
variable = disp_z
value = 0
boundary = back
[]
[top_velocity]
type = FunctionDirichletBC
variable = disp_z
function = -0.01*t
boundary = front
[]
[]
[Kernels]
[grad_stress_x]
type = StressDivergenceTensors
variable = disp_x
component = 0
[]
[grad_stress_y]
type = StressDivergenceTensors
variable = disp_y
component = 1
[]
[grad_stress_z]
type = StressDivergenceTensors
variable = disp_z
component = 2
[]
[poro_x]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
variable = disp_x
component = 0
[]
[poro_y]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
variable = disp_y
component = 1
[]
[poro_z]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
component = 2
variable = disp_z
[]
[poro_vol_exp]
type = PorousFlowMassVolumetricExpansion
variable = porepressure
fluid_component = 0
[]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = porepressure
[]
[]
[AuxVariables]
[stress_xx]
order = CONSTANT
family = MONOMIAL
[]
[stress_xy]
order = CONSTANT
family = MONOMIAL
[]
[stress_xz]
order = CONSTANT
family = MONOMIAL
[]
[stress_yy]
order = CONSTANT
family = MONOMIAL
[]
[stress_yz]
order = CONSTANT
family = MONOMIAL
[]
[stress_zz]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
[]
[stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
[]
[stress_xz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xz
index_i = 0
index_j = 2
[]
[stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
[]
[stress_yz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yz
index_i = 1
index_j = 2
[]
[stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '1 1.5'
# bulk modulus is lambda + 2*mu/3 = 1 + 2*1.5/3 = 2
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = porepressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0.5 0 0 0 0.5 0 0 0 0.5'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure disp_x disp_y disp_z'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Postprocessors]
[p0]
type = PointValue
outputs = 'console csv'
execute_on = 'initial timestep_end'
point = '0 0 0'
variable = porepressure
[]
[zdisp]
type = PointValue
outputs = csv
point = '0 0 0.5'
use_displaced_mesh = false
variable = disp_z
[]
[stress_xx]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_xx
[]
[stress_yy]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_yy
[]
[stress_zz]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_zz
[]
[fluid_mass]
type = PorousFlowFluidMass
fluid_component = 0
execute_on = 'initial timestep_end'
outputs = 'console csv'
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-14 1E-8 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
start_time = 0
end_time = 10
dt = 2
[]
[Outputs]
execute_on = 'initial timestep_end'
file_base = mass04
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/adaptivity/tri3_adaptivity.i)
[Mesh]
[mesh]
type = GeneratedMeshGenerator
elem_type = TRI3
dim = 2
nx = 2
ny = 2
[]
[]
[Adaptivity]
marker = marker
max_h_level = 1
[Markers]
[marker]
type = UniformMarker
mark = REFINE
[]
[]
[]
[GlobalParams]
PorousFlowDictator = 'dictator'
[]
[Variables]
[pp]
initial_condition = '0'
[]
[]
[Kernels]
[mass]
type = PorousFlowMassTimeDerivative
variable = pp
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = pp
gravity = '0 0 0'
[]
[]
[BCs]
[left]
type = DirichletBC
variable = pp
boundary = 'left'
value = 1
[]
[right]
type = DirichletBC
variable = pp
boundary = 'right'
value = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.2
density0 = 1
viscosity = 1
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = 'pp'
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = '0.1'
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-3 0 0 0 1e-3 0 0 0 1e-3'
[]
[relperm]
type = PorousFlowRelativePermeabilityConst
phase = 0
[]
[]
[Postprocessors]
[numdofs]
type = NumDOFs
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
end_time = 4
dt = 1
solve_type = Newton
nl_abs_tol = 1e-12
[]
[Outputs]
exodus = true
perf_graph = true
show = pp
[]
(modules/porous_flow/test/tests/gravity/grav01a_fv.i)
# Checking that gravity head is established using FV
# 1phase, vanGenuchten, constant fluid-bulk, constant viscosity, constant permeability, Corey relative perm
# fully saturated
# For better agreement with the analytical solution (ana_pp), just increase nx
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
xmin = -1
xmax = 0
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
type = MooseVariableFVReal
[]
[]
[ICs]
[p]
type = RandomIC
variable = pp
min = 0
max = 1
[]
[]
[FVKernels]
[flux0]
type = FVPorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
gravity = '-1 0 0'
[]
[]
[Functions]
[ana_pp]
type = ParsedFunction
symbol_names = 'g B p0 rho0'
symbol_values = '1 1.2 0 1'
expression = '-B*log(exp(-p0/B)+g*rho0*x/B)' # expected pp at base
[]
[]
[FVBCs]
[z]
type = FVDirichletBC
variable = pp
boundary = right
value = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.2
density0 = 1
viscosity = 1
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = ADPorousFlowTemperature
[]
[ppss]
type = ADPorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = ADPorousFlowMassFraction
[]
[simple_fluid]
type = ADPorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = ADPorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = ADPorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[]
[Postprocessors]
[pp_base]
type = PointValue
variable = pp
point = '-1 0 0'
[]
[pp_analytical]
type = FunctionValuePostprocessor
function = ana_pp
point = '-1 0 0'
[]
[pp_00]
type = PointValue
variable = pp
point = '0 0 0'
[]
[pp_01]
type = PointValue
variable = pp
point = '-0.1 0 0'
[]
[pp_02]
type = PointValue
variable = pp
point = '-0.2 0 0'
[]
[pp_03]
type = PointValue
variable = pp
point = '-0.3 0 0'
[]
[pp_04]
type = PointValue
variable = pp
point = '-0.4 0 0'
[]
[pp_05]
type = PointValue
variable = pp
point = '-0.5 0 0'
[]
[pp_06]
type = PointValue
variable = pp
point = '-0.6 0 0'
[]
[pp_07]
type = PointValue
variable = pp
point = '-0.7 0 0'
[]
[pp_08]
type = PointValue
variable = pp
point = '-0.8 0 0'
[]
[pp_09]
type = PointValue
variable = pp
point = '-0.9 0 0'
[]
[pp_10]
type = PointValue
variable = pp
point = '-1 0 0'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Steady
solve_type = Newton
[]
[Outputs]
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/actions/fullsat_brine_except3.i)
# Check error when using PorousFlowFullySaturated action,
# attempting to use both brine and single-component fluids
[Mesh]
type = GeneratedMesh
dim = 1
nx = 1
[]
[GlobalParams]
block = '0'
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[PorousFlowFullySaturated]
coupling_type = ThermoHydro
porepressure = pp
temperature = temp
mass_fraction_vars = "nacl"
fluid_properties_type = PorousFlowSingleComponentFluid
nacl_name = nacl
fp = simple_fluid
dictator_name = dictator
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
[]
[]
[Variables]
[pp]
initial_condition = 20E6
[]
[temp]
initial_condition = 323.15
[]
[nacl]
initial_condition = 0.1047
[]
[]
[Kernels]
# All provided by PorousFlowFullySaturated action
[]
[BCs]
[t_bdy]
type = DirichletBC
variable = temp
boundary = 'left right'
value = 323.15
[]
[p_bdy]
type = DirichletBC
variable = pp
boundary = 'left right'
value = 20E6
[]
[nacl_bdy]
type = DirichletBC
variable = nacl
boundary = 'left right'
value = 0.1047
[]
[]
[Materials]
# Thermal conductivity
[thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '3 0 0 0 3 0 0 0 3'
wet_thermal_conductivity = '3 0 0 0 3 0 0 0 3'
[]
# Specific heat capacity
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 850
density = 2700
[]
# Permeability
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-13 0 0 0 1E-13 0 0 0 1E-13'
[]
# Porosity
[porosity]
type = PorousFlowPorosityConst
porosity = 0.3
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
file_base = fullsat_brine_except2
[]
(modules/porous_flow/test/tests/chemistry/2species_equilibrium.i)
# PorousFlow analogy of chemical_reactions/test/tests/aqueous_equilibrium/2species.i
#
# Simple equilibrium reaction example to illustrate the use of PorousFlowMassFractionAqueousEquilibriumChemistry
#
# In this example, two primary species a and b are transported by diffusion and convection
# from the left of the porous medium, reacting to form two equilibrium species pa2 and pab
# according to the equilibrium reaction:
#
# reactions = '2a = pa2 rate = 10^2
# a + b = pab rate = 10^-2'
#
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
[]
[Variables]
[a]
order = FIRST
family = LAGRANGE
[InitialCondition]
type = BoundingBoxIC
x1 = 0.0
y1 = 0.0
x2 = 1.0e-10
y2 = 1
inside = 1.0e-2
outside = 1.0e-10
[]
[]
[b]
order = FIRST
family = LAGRANGE
[InitialCondition]
type = BoundingBoxIC
x1 = 0.0
y1 = 0.0
x2 = 1.0e-10
y2 = 1
inside = 1.0e-2
outside = 1.0e-10
[]
[]
[]
[AuxVariables]
[eqm_k0]
initial_condition = 1E2
[]
[eqm_k1]
initial_condition = 1E-2
[]
[pressure]
[]
[pa2]
family = MONOMIAL
order = CONSTANT
[]
[pab]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[pa2]
type = PorousFlowPropertyAux
property = secondary_concentration
secondary_species = 0
variable = pa2
[]
[pab]
type = PorousFlowPropertyAux
property = secondary_concentration
secondary_species = 1
variable = pab
[]
[]
[ICs]
[pressure]
type = FunctionIC
variable = pressure
function = 2-x
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Kernels]
[mass_a]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = a
[]
[flux_a]
type = PorousFlowFullySaturatedDarcyFlow
variable = a
fluid_component = 0
[]
[diff_a]
type = PorousFlowDispersiveFlux
variable = a
fluid_component = 0
disp_trans = 0
disp_long = 0
[]
[mass_b]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = b
[]
[flux_b]
type = PorousFlowFullySaturatedDarcyFlow
variable = b
fluid_component = 1
[]
[diff_b]
type = PorousFlowDispersiveFlux
variable = b
fluid_component = 1
disp_trans = 0
disp_long = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'a b'
number_fluid_phases = 1
number_fluid_components = 3
number_aqueous_equilibrium = 2
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9 # huge, so mimic chemical_reactions
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseFullySaturated
porepressure = pressure
[]
[massfrac]
type = PorousFlowMassFractionAqueousEquilibriumChemistry
mass_fraction_vars = 'a b'
num_reactions = 2
equilibrium_constants = 'eqm_k0 eqm_k1'
primary_activity_coefficients = '1 1'
secondary_activity_coefficients = '1 1'
reactions = '2 0
1 1'
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[permeability]
type = PorousFlowPermeabilityConst
# porous_flow permeability / porous_flow viscosity = chemical_reactions conductivity = 1E-4
permeability = '1E-7 0 0 0 1E-7 0 0 0 1E-7'
[]
[relp]
type = PorousFlowRelativePermeabilityConst
phase = 0
[]
[diff]
type = PorousFlowDiffusivityConst
# porous_flow diffusion_coeff * tortuousity * porosity = chemical_reactions diffusivity = 1E-4
diffusion_coeff = '5E-4 5E-4 5E-4'
tortuosity = 1.0
[]
[]
[BCs]
[a_left]
type = DirichletBC
variable = a
boundary = left
value = 1.0e-2
[]
[b_left]
type = DirichletBC
variable = b
boundary = left
value = 1.0e-2
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 10
end_time = 100
[]
[Outputs]
print_linear_residuals = true
exodus = true
perf_graph = true
hide = eqm_k0
[]
(modules/porous_flow/test/tests/jacobian/heat_advection01_fullsat_upwind.i)
# 1phase, using fully-saturated, fully-upwinded version, heat advection
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[temp]
[]
[pp]
[]
[]
[ICs]
[temp]
type = RandomIC
variable = temp
max = 1.0
min = 0.0
[]
[pp]
type = RandomIC
variable = pp
max = 0.0
min = -1.0
[]
[]
[Kernels]
[pp]
type = TimeDerivative
variable = pp
[]
[heat_advection]
type = PorousFlowFullySaturatedUpwindHeatAdvection
variable = temp
gravity = '1 2 3'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 1.1
thermal_expansion = 1
viscosity = 1
cv = 1.1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[PS]
type = PorousFlow1PhaseFullySaturated
porepressure = pp
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[]
[Preconditioning]
active = check
[check]
type = SMP
full = true
petsc_options_iname = '-snes_type'
petsc_options_value = 'test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/gravity/grav01d.i)
# Test illustrating that PorousFlow allows block-restricted relative permeabilities and capillarities
# and automatically adds appropriate Joiners.
# Physically, this test is checking that gravity head is established
# for 1phase, vanGenuchten, constant fluid-bulk, constant viscosity, constant permeability, Corey relative perm
# For better agreement with the analytical solution (ana_pp), just increase nx
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 1
nx = 100
xmin = -1
xmax = 0
[]
[define_block1]
input = gen
type = SubdomainBoundingBoxGenerator
block_id = 1
bottom_left = '-1 -1 -1'
top_right = '-0.5 1 1'
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[InitialCondition]
type = RandomIC
min = -1
max = 1
[]
[]
[]
[Kernels]
[dot]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
gravity = '-1 0 0'
[]
[]
[Functions]
[ana_pp]
type = ParsedFunction
symbol_names = 'g B p0 rho0'
symbol_values = '1 2 -1 1'
expression = '-B*log(exp(-p0/B)+g*rho0*x/B)' # expected pp at base
[]
[]
[BCs]
[z]
type = DirichletBC
variable = pp
boundary = right
value = -1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc_0]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[pc_1]
type = PorousFlowCapillaryPressureVG
m = 0.6
alpha = 2
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2
density0 = 1
viscosity = 1
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss_0]
type = PorousFlow1PhaseP
block = 0
porepressure = pp
capillary_pressure = pc_0
[]
[ppss_1]
type = PorousFlow1PhaseP
block = 1
porepressure = pp
capillary_pressure = pc_1
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm_0]
type = PorousFlowRelativePermeabilityCorey
block = 0
n = 1
phase = 0
[]
[relperm_1]
type = PorousFlowRelativePermeabilityCorey
block = 1
n = 2
phase = 0
[]
[]
[Postprocessors]
[pp_base]
type = PointValue
variable = pp
point = '-1 0 0'
[]
[pp_analytical]
type = FunctionValuePostprocessor
function = ana_pp
point = '-1 0 0'
[]
[]
[Preconditioning]
active = andy
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E6
end_time = 1E6
[]
[Outputs]
execute_on = 'timestep_end'
file_base = grav01d
csv = true
[]
(modules/porous_flow/test/tests/jacobian/fflux13.i)
# 2phase (PP), 3components (that exist in both phases), constant viscosity, constant insitu permeability
# density with constant bulk, Corey relative perm, nonzero gravity, unsaturated with vanGenuchten
# using harmonic-mean mobility
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[massfrac_ph0_sp0]
[]
[]
[AuxVariables]
[massfrac_ph0_sp1]
[]
[massfrac_ph1_sp0]
[]
[massfrac_ph1_sp1]
[]
[]
[ICs]
[ppwater]
type = RandomIC
variable = ppwater
min = -1
max = 0
[]
[ppgas]
type = RandomIC
variable = ppgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 0.4
[]
[massfrac_ph0_sp1]
type = RandomIC
variable = massfrac_ph0_sp1
min = 0
max = 0.4
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 0.4
[]
[massfrac_ph1_sp1]
type = RandomIC
variable = massfrac_ph1_sp1
min = 0
max = 0.4
[]
[]
[Kernels]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = ppwater
gravity = '-1 -0.1 0'
full_upwind_threshold = 0
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = ppgas
gravity = '-1 -0.1 0'
full_upwind_threshold = 0
fallback_scheme = harmonic
[]
[flux2]
type = PorousFlowAdvectiveFlux
fluid_component = 2
variable = massfrac_ph0_sp0
gravity = '-1 -0.1 0'
full_upwind_threshold = 0
fallback_scheme = harmonic
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas massfrac_ph0_sp0'
number_fluid_phases = 2
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph0_sp1 massfrac_ph1_sp0 massfrac_ph1_sp1'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/sinks/injection_production_eg.i)
# phase = 0 is liquid phase
# phase = 1 is gas phase
# fluid_component = 0 is water
# fluid_component = 1 is CO2
# Constant rate of CO2 injection into the left boundary
# 1D mesh
# The PorousFlowPiecewiseLinearSinks remove the correct water and CO2 from the right boundary
# Note i take pretty big timesteps here so the system is quite nonlinear
[Mesh]
type = GeneratedMesh
dim = 1
nx = 20
xmax = 20
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[AuxVariables]
[saturation_gas]
order = CONSTANT
family = MONOMIAL
[]
[frac_water_in_liquid]
initial_condition = 1.0
[]
[frac_water_in_gas]
initial_condition = 0.0
[]
[]
[AuxKernels]
[saturation_gas]
type = PorousFlowPropertyAux
variable = saturation_gas
property = saturation
phase = 1
execute_on = timestep_end
[]
[]
[Variables]
[pwater]
initial_condition = 20E6
[]
[pgas]
initial_condition = 20.1E6
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pwater
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = pgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = pgas
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas pwater'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1E-6
m = 0.6
[]
[]
[FluidProperties]
[true_water]
type = Water97FluidProperties
[]
[tabulated_water]
type = TabulatedBicubicFluidProperties
fp = true_water
temperature_min = 275
pressure_max = 1E8
interpolated_properties = 'density viscosity enthalpy internal_energy'
fluid_property_output_file = water97_tabulated_11.csv
# Comment out the fp parameter and uncomment below to use the newly generated tabulation
# fluid_property_file = water97_tabulated_11.csv
[]
[true_co2]
type = CO2FluidProperties
[]
[tabulated_co2]
type = TabulatedBicubicFluidProperties
fp = true_co2
temperature_min = 275
pressure_max = 1E8
interpolated_properties = 'density viscosity enthalpy internal_energy'
fluid_property_output_file = co2_tabulated_11.csv
# Comment out the fp parameter and uncomment below to use the newly generated tabulation
# fluid_property_file = co2_tabulated_11.csv
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 293.15
[]
[saturation_calculator]
type = PorousFlow2PhasePP
phase0_porepressure = pwater
phase1_porepressure = pgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'frac_water_in_liquid frac_water_in_gas'
[]
[water]
type = PorousFlowSingleComponentFluid
fp = tabulated_water
phase = 0
[]
[co2]
type = PorousFlowSingleComponentFluid
fp = tabulated_co2
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.1
sum_s_res = 0.2
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityBC
nw_phase = true
lambda = 2
s_res = 0.1
sum_s_res = 0.2
phase = 1
[]
[]
[BCs]
[co2_injection]
type = PorousFlowSink
boundary = left
variable = pgas # pgas is associated with the CO2 mass balance (fluid_component = 1 in its Kernels)
flux_function = -1E-2 # negative means a source, rather than a sink
[]
[right_water]
type = PorousFlowPiecewiseLinearSink
boundary = right
# a sink of water, since the Kernels given to pwater are for fluid_component = 0 (the water)
variable = pwater
# this Sink is a function of liquid porepressure
# Also, all the mass_fraction, mobility and relperm are referenced to the liquid phase now
fluid_phase = 0
# Sink strength = (Pwater - 20E6)
pt_vals = '0 1E9'
multipliers = '0 1E9'
PT_shift = 20E6
# multiply Sink strength computed above by mass fraction of water at the boundary
mass_fraction_component = 0
# also multiply Sink strength by mobility of the liquid
use_mobility = true
# also multiply Sink strength by the relperm of the liquid
use_relperm = true
# also multiplly Sink strength by 1/L, where L is the distance to the fixed-porepressure external environment
flux_function = 10 # 1/L
[]
[right_co2]
type = PorousFlowPiecewiseLinearSink
boundary = right
variable = pgas
fluid_phase = 1
pt_vals = '0 1E9'
multipliers = '0 1E9'
PT_shift = 20.1E6
mass_fraction_component = 1
use_mobility = true
use_relperm = true
flux_function = 10 # 1/L
[]
[]
[Preconditioning]
active = 'basic'
[basic]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu NONZERO 2'
[]
[preferred]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu mumps'
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
nl_abs_tol = 1E-13
nl_rel_tol = 1E-10
end_time = 1e4
[TimeStepper]
type = IterationAdaptiveDT
dt = 1E4
growth_factor = 1.1
[]
[]
[VectorPostprocessors]
[pps]
type = LineValueSampler
warn_discontinuous_face_values = false
start_point = '0 0 0'
end_point = '20 0 0'
num_points = 20
sort_by = x
variable = 'pgas pwater saturation_gas'
[]
[]
[Outputs]
print_linear_residuals = false
perf_graph = true
[out]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/test/tests/gravity/fully_saturated_upwinded_grav01c_action.i)
# Checking that gravity head is established
# 1phase, 2-component, constant fluid-bulk, constant viscosity, constant permeability
# fully saturated with fully-saturated Kernel with upwinding
# For better agreement with the analytical solution (ana_pp), just increase nx
# This is the Action version of fully_saturated_upwinded_grav01c.i
# NOTE: this test is numerically delicate because the steady-state configuration is independent of the mass fraction, so the frac variable can assume any value as long as mass-fraction is conserved
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
xmin = -1
xmax = 0
[]
[Variables]
[pp]
[InitialCondition]
type = RandomIC
min = 0
max = 1
[]
[]
[frac]
[InitialCondition]
type = RandomIC
min = 0
max = 1
[]
[]
[]
[PorousFlowFullySaturated]
porepressure = pp
mass_fraction_vars = frac
fp = simple_fluid
gravity = '-1 0 0'
multiply_by_density = true
[]
[Functions]
[ana_pp]
type = ParsedFunction
symbol_names = 'g B p0 rho0'
symbol_values = '1 1.2 0 1'
expression = '-B*log(exp(-p0/B)+g*rho0*x/B)' # expected pp at base
[]
[]
[BCs]
[z]
type = DirichletBC
variable = pp
boundary = right
value = 0
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.2
density0 = 1
viscosity = 1
thermal_expansion = 0
[]
[]
[Materials]
[permeability]
type = PorousFlowPermeabilityConst
PorousFlowDictator = dictator
permeability = '1 0 0 0 2 0 0 0 3'
[]
[]
[Postprocessors]
[pp_base]
type = PointValue
variable = pp
point = '-1 0 0'
[]
[pp_analytical]
type = FunctionValuePostprocessor
function = ana_pp
point = '-1 0 0'
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Steady
solve_type = Newton
nl_rel_tol = 1E-12
petsc_options_iname = '-pc_factor_shift_type'
petsc_options_value = 'NONZERO'
nl_max_its = 100
[]
[Outputs]
csv = true
[]
(modules/porous_flow/test/tests/gravity/grav01a.i)
# Checking that gravity head is established
# 1phase, vanGenuchten, constant fluid-bulk, constant viscosity, constant permeability, Corey relative perm
# fully saturated
# For better agreement with the analytical solution (ana_pp), just increase nx
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
xmin = -1
xmax = 0
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[InitialCondition]
type = RandomIC
min = 0
max = 1
[]
[]
[]
[Kernels]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
gravity = '-1 0 0'
[]
[]
[Functions]
[ana_pp]
type = ParsedFunction
symbol_names = 'g B p0 rho0'
symbol_values = '1 1.2 0 1'
expression = '-B*log(exp(-p0/B)+g*rho0*x/B)' # expected pp at base
[]
[]
[BCs]
[z]
type = DirichletBC
variable = pp
boundary = right
value = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.2
density0 = 1
viscosity = 1
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[]
[Postprocessors]
[pp_base]
type = PointValue
variable = pp
point = '-1 0 0'
[]
[pp_analytical]
type = FunctionValuePostprocessor
function = ana_pp
point = '-1 0 0'
[]
[pp_00]
type = PointValue
variable = pp
point = '0 0 0'
[]
[pp_01]
type = PointValue
variable = pp
point = '-0.1 0 0'
[]
[pp_02]
type = PointValue
variable = pp
point = '-0.2 0 0'
[]
[pp_03]
type = PointValue
variable = pp
point = '-0.3 0 0'
[]
[pp_04]
type = PointValue
variable = pp
point = '-0.4 0 0'
[]
[pp_05]
type = PointValue
variable = pp
point = '-0.5 0 0'
[]
[pp_06]
type = PointValue
variable = pp
point = '-0.6 0 0'
[]
[pp_07]
type = PointValue
variable = pp
point = '-0.7 0 0'
[]
[pp_08]
type = PointValue
variable = pp
point = '-0.8 0 0'
[]
[pp_09]
type = PointValue
variable = pp
point = '-0.9 0 0'
[]
[pp_10]
type = PointValue
variable = pp
point = '-1 0 0'
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Steady
solve_type = Newton
[]
[Outputs]
execute_on = 'timestep_end'
file_base = grav01a
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/gravity/grav02b.i)
# Checking that gravity head is established in the steady-state situation when 0<saturation<1 (note the strictly less-than).
# 2phase (PP), 2components, vanGenuchten, constant fluid bulk-moduli for each phase, constant viscosity, constant permeability, Corey relative perm
# For better agreement with the analytical solution (ana_pp), just increase nx
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = -1
xmax = 0
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
initial_condition = -1.0
[]
[ppgas]
initial_condition = 0
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[]
[Kernels]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = ppwater
gravity = '-1 0 0'
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = ppgas
gravity = '-1 0 0'
[]
[]
[BCs]
[ppwater]
type = DirichletBC
boundary = right
variable = ppwater
value = -1
[]
[ppgas]
type = DirichletBC
boundary = right
variable = ppgas
value = 0
[]
[]
[Functions]
[ana_ppwater]
type = ParsedFunction
symbol_names = 'g B p0 rho0'
symbol_values = '1 2 pp_water_top 1'
expression = '-B*log(exp(-p0/B)+g*rho0*x/B)' # expected pp at base
[]
[ana_ppgas]
type = ParsedFunction
symbol_names = 'g B p0 rho0'
symbol_values = '1 1 pp_gas_top 0.1'
expression = '-B*log(exp(-p0/B)+g*rho0*x/B)' # expected pp at base
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2
density0 = 1
viscosity = 1
thermal_expansion = 0
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 0.1
viscosity = 0.5
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 1
[]
[]
[Postprocessors]
[pp_water_top]
type = PointValue
variable = ppwater
point = '0 0 0'
[]
[pp_water_base]
type = PointValue
variable = ppwater
point = '-1 0 0'
[]
[pp_water_analytical]
type = FunctionValuePostprocessor
function = ana_ppwater
point = '-1 0 0'
[]
[pp_gas_top]
type = PointValue
variable = ppgas
point = '0 0 0'
[]
[pp_gas_base]
type = PointValue
variable = ppgas
point = '-1 0 0'
[]
[pp_gas_analytical]
type = FunctionValuePostprocessor
function = ana_ppgas
point = '-1 0 0'
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Steady
solve_type = Newton
[]
[Outputs]
file_base = grav02b
[csv]
type = CSV
[]
exodus = false
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2comp_nodens.i)
# No-density version of pressure pulse in 1D with 1 phase but 2 components (viscosity, relperm, etc are independent of mass-fractions)
# This input file uses the PorousFlowFullySaturated Action but with multiply_by_density = false
# This implies the porepressure will immediately go to steady state
# The massfrac variables will then advect with the Darcy velocity
# The Darcy velocity = (k / mu) * grad(P) = (1E-7 / 1E-3) * (1E6 / 1E2) = 1 m/s
# The advection speed = Darcy velocity / porosity = 10 m/s
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 0
[]
[tracer]
initial_condition = 0.1
[]
[]
[PorousFlowFullySaturated]
porepressure = pp
mass_fraction_vars = 'tracer'
gravity = '0 0 0'
fp = simple_fluid
stabilization = Full
multiply_by_density = false
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-7 0 0 0 1E-7 0 0 0 1E-7'
[]
[]
[BCs]
[left_p]
type = DirichletBC
boundary = left
value = 1E6
variable = pp
[]
[right_p]
type = DirichletBC
boundary = right
value = 0
variable = pp
[]
[left_tracer]
type = DirichletBC
boundary = left
value = 0.9
variable = tracer
[]
[right_tracer]
type = DirichletBC
boundary = right
value = 0.1
variable = tracer
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 5
[]
[Postprocessors]
[p000]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = 'initial timestep_end'
[]
[p050]
type = PointValue
variable = pp
point = '50 0 0'
execute_on = 'initial timestep_end'
[]
[p100]
type = PointValue
variable = pp
point = '100 0 0'
execute_on = 'initial timestep_end'
[]
[tracer_000]
type = PointValue
variable = tracer
point = '0 0 0'
execute_on = 'initial timestep_end'
[]
[tracer_010]
type = PointValue
variable = tracer
point = '10 0 0'
execute_on = 'initial timestep_end'
[]
[tracer_020]
type = PointValue
variable = tracer
point = '20 0 0'
execute_on = 'initial timestep_end'
[]
[tracer_030]
type = PointValue
variable = tracer
point = '30 0 0'
execute_on = 'initial timestep_end'
[]
[tracer_040]
type = PointValue
variable = tracer
point = '40 0 0'
execute_on = 'initial timestep_end'
[]
[tracer_050]
type = PointValue
variable = tracer
point = '50 0 0'
execute_on = 'initial timestep_end'
[]
[tracer_060]
type = PointValue
variable = tracer
point = '60 0 0'
execute_on = 'initial timestep_end'
[]
[tracer_070]
type = PointValue
variable = tracer
point = '70 0 0'
execute_on = 'initial timestep_end'
[]
[tracer_080]
type = PointValue
variable = tracer
point = '80 0 0'
execute_on = 'initial timestep_end'
[]
[tracer_090]
type = PointValue
variable = tracer
point = '90 0 0'
execute_on = 'initial timestep_end'
[]
[tracer_100]
type = PointValue
variable = tracer
point = '100 0 0'
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
csv = true
[]
(modules/porous_flow/test/tests/actions/basicthm_h.i)
# PorousFlowBasicTHM action with coupling_type = HydroGenerator
# (no thermal or mechanical effects)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
nx = 10
ny = 3
xmax = 10
ymax = 3
[]
[aquifer]
input = gen
type = SubdomainBoundingBoxGenerator
block_id = 1
bottom_left = '0 1 0'
top_right = '10 2 0'
[]
[injection_area]
type = SideSetsAroundSubdomainGenerator
block = 1
new_boundary = 'injection_area'
normal = '-1 0 0'
input = 'aquifer'
[]
[outflow_area]
type = SideSetsAroundSubdomainGenerator
block = 1
new_boundary = 'outflow_area'
normal = '1 0 0'
input = 'injection_area'
[]
[rename]
type = RenameBlockGenerator
old_block = '0 1'
new_block = 'caprock aquifer'
input = 'outflow_area'
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[porepressure]
initial_condition = 1e6
[]
[]
[AuxVariables]
[temperature]
initial_condition = 293
[]
[]
[PorousFlowBasicTHM]
porepressure = porepressure
temperature = temperature
coupling_type = Hydro
gravity = '0 0 0'
fp = simple_fluid
[]
[BCs]
[constant_injection_porepressure]
type = DirichletBC
variable = porepressure
value = 1.5e6
boundary = injection_area
[]
[constant_outflow_porepressure]
type = PorousFlowPiecewiseLinearSink
variable = porepressure
boundary = outflow_area
pt_vals = '0 1e9'
multipliers = '0 1e9'
flux_function = 1e-6
PT_shift = 1e6
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[biot_modulus]
type = PorousFlowConstantBiotModulus
biot_coefficient = 0.8
solid_bulk_compliance = 2e-7
fluid_bulk_modulus = 1e7
[]
[permeability_aquifer]
type = PorousFlowPermeabilityConst
block = aquifer
permeability = '1e-13 0 0 0 1e-13 0 0 0 1e-13'
[]
[permeability_caprock]
type = PorousFlowPermeabilityConst
block = caprock
permeability = '1e-15 0 0 0 1e-15 0 0 0 1e-15'
[]
[]
[Preconditioning]
[basic]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1e4
dt = 1e3
nl_abs_tol = 1e-15
nl_rel_tol = 1E-14
[]
[Outputs]
exodus = true
[]
(modules/porous_flow/test/tests/dirackernels/injection_production.i)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 3
nx = 10
ny = 10
nz = 1
xmin = -50
xmax = 50
ymin = -50
ymax = 50
zmin = 0
zmax = 10
[]
[central_nodes]
input = gen
type = ExtraNodesetGenerator
new_boundary = central_nodes
coord = '0 0 0; 0 0 10'
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[porepressure]
initial_condition = 20E6
[]
[temperature]
initial_condition = 400
scaling = 1E-6 # fluid enthalpy is roughly 1E6
[]
[]
[BCs]
[injection_temperature]
type = DirichletBC
variable = temperature
value = 300
boundary = central_nodes
[]
[]
[DiracKernels]
[fluid_injection]
type = PorousFlowPeacemanBorehole
variable = porepressure
SumQuantityUO = injected_mass
point_file = injection.bh
function_of = pressure
fluid_phase = 0
bottom_p_or_t = 21E6
unit_weight = '0 0 0'
use_mobility = true
character = -1
[]
[fluid_production]
type = PorousFlowPeacemanBorehole
variable = porepressure
SumQuantityUO = produced_mass
point_file = production.bh
function_of = pressure
fluid_phase = 0
bottom_p_or_t = 20E6
unit_weight = '0 0 0'
use_mobility = true
character = 1
[]
[remove_heat_at_production_well]
type = PorousFlowPeacemanBorehole
variable = temperature
SumQuantityUO = produced_heat
point_file = production.bh
function_of = pressure
fluid_phase = 0
bottom_p_or_t = 20E6
unit_weight = '0 0 0'
use_mobility = true
use_enthalpy = true
character = 1
[]
[]
[UserObjects]
[injected_mass]
type = PorousFlowSumQuantity
[]
[produced_mass]
type = PorousFlowSumQuantity
[]
[produced_heat]
type = PorousFlowSumQuantity
[]
[]
[Postprocessors]
[heat_joules_extracted_this_timestep]
type = PorousFlowPlotQuantity
uo = produced_heat
[]
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
thermal_expansion = 2E-4
bulk_modulus = 2E9
viscosity = 1E-3
density0 = 1000
cv = 4000.0
cp = 4000.0
[]
[]
[PorousFlowUnsaturated]
porepressure = porepressure
temperature = temperature
coupling_type = ThermoHydro
gravity = '0 0 0'
fp = the_simple_fluid
[]
[Materials]
[porosity]
type = PorousFlowPorosityConst # only the initial value of this is ever used
porosity = 0.1
[]
[biot_modulus]
type = PorousFlowConstantBiotModulus
solid_bulk_compliance = 1E-10
fluid_bulk_modulus = 2E9
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[thermal_expansion]
type = PorousFlowConstantThermalExpansionCoefficient
fluid_coefficient = 5E-6
drained_coefficient = 2E-4
[]
[thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '1 0 0 0 1 0 0 0 1'
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
density = 2500.0
specific_heat_capacity = 1200.0
[]
[]
[Preconditioning]
active = basic
[basic]
type = SMP
full = true
petsc_options = '-ksp_diagonal_scale -ksp_diagonal_scale_fix'
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = ' asm lu NONZERO 2'
[]
[preferred_but_might_not_be_installed]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu mumps'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 2E6
dt = 2E5
[]
[Outputs]
exodus = true
[]
(modules/porous_flow/test/tests/jacobian/waterncg_twophase.i)
# Tests correct calculation of properties derivatives in PorousFlowWaterNCG
# for conditions for two phases
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[pgas]
[]
[z]
[]
[]
[ICs]
[pgas]
type = RandomIC
min = 1e5
max = 5e5
variable = pgas
[]
[z]
type = RandomIC
min = 0.01
max = 0.06
variable = z
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pgas
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = z
fluid_component = 1
[]
[adv0]
type = PorousFlowAdvectiveFlux
variable = pgas
fluid_component = 0
[]
[adv1]
type = PorousFlowAdvectiveFlux
variable = z
fluid_component = 1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas z'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e1
pc_max = 1e4
[]
[fs]
type = PorousFlowWaterNCG
water_fp = water
gas_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[water]
type = Water97FluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 50
[]
[waterncg]
type = PorousFlowFluidState
gas_porepressure = pgas
z = z
temperature_unit = Celsius
capillary_pressure = pc
fluid_state = fs
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[AuxVariables]
[sgas]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[sgas]
type = PorousFlowPropertyAux
property = saturation
phase = 1
variable = sgas
[]
[]
[Postprocessors]
[sgas_min]
type = ElementExtremeValue
variable = sgas
value_type = min
[]
[sgas_max]
type = ElementExtremeValue
variable = sgas
value_type = max
[]
[]
(modules/porous_flow/examples/flow_through_fractured_media/coarse_3D.i)
# Flow and solute transport along 2 2D eliptical fractures embedded in a 3D porous matrix
# the model domain has dimensions 1 x 1 x 0.3m and the two fracture have r1 = 0.45 and r2 = 0.2
# The fractures intersect each other and the domain boundaries on two opposite sides
# fracture aperture = 6e-4m
# fracture porosity = 6e-4m
# fracture permeability = 1.8e-11 which is based in k=3e-8 from a**2/12, and k*a = 3e-8*6e-4;
# matrix porosity = 0.1;
# matrix permeanility = 1e-20;
[Mesh]
type = FileMesh
file = coarse_3D.e
block_id = '1 2 3'
block_name = 'matrix f1 f2'
boundary_id = '1 2 3 4'
boundary_name = 'rf2 lf1 right_matrix left_matrix'
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[pp]
[]
[tracer]
[]
[]
[AuxVariables]
[velocity_x]
family = MONOMIAL
order = CONSTANT
block = 'f1 f2'
[]
[velocity_y]
family = MONOMIAL
order = CONSTANT
block = 'f1 f2'
[]
[velocity_z]
family = MONOMIAL
order = CONSTANT
block = 'f1 f2'
[]
[]
[AuxKernels]
[velocity_x]
type = PorousFlowDarcyVelocityComponentLowerDimensional
variable = velocity_x
component = x
aperture = 6E-4
[]
[velocity_y]
type = PorousFlowDarcyVelocityComponentLowerDimensional
variable = velocity_y
component = y
aperture = 6E-4
[]
[velocity_z]
type = PorousFlowDarcyVelocityComponentLowerDimensional
variable = velocity_z
component = z
aperture = 6E-4
[]
[]
[ICs]
[pp]
type = ConstantIC
variable = pp
value = 1e6
[]
[tracer]
type = ConstantIC
variable = tracer
value = 0
[]
[]
[BCs]
[top]
type = DirichletBC
value = 0
variable = tracer
boundary = rf2
[]
[bottom]
type = DirichletBC
value = 1
variable = tracer
boundary = lf1
[]
[ptop]
type = DirichletBC
variable = pp
boundary = rf2
value = 1e6
[]
[pbottom]
type = DirichletBC
variable = pp
boundary = lf1
value = 1.02e6
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[adv0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
[]
[diff0]
type = PorousFlowDispersiveFlux
fluid_component = 0
variable = pp
disp_trans = 0
disp_long = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = tracer
[]
[adv1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = tracer
[]
[diff1]
type = PorousFlowDispersiveFlux
fluid_component = 1
variable = tracer
disp_trans = 0
disp_long = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp tracer'
number_fluid_phases = 1
number_fluid_components = 2
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseFullySaturated
porepressure = pp
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'tracer'
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[poro1]
type = PorousFlowPorosityConst
porosity = 6e-4 # = a * phif
block = 'f1 f2'
[]
[diff1]
type = PorousFlowDiffusivityConst
diffusion_coeff = '1.e-9 1.e-9'
tortuosity = 1.0
block = 'f1 f2'
[]
[poro2]
type = PorousFlowPorosityConst
porosity = 0.1
block = 'matrix'
[]
[diff2]
type = PorousFlowDiffusivityConst
diffusion_coeff = '1.e-9 1.e-9'
tortuosity = 0.1
block = 'matrix'
[]
[relp]
type = PorousFlowRelativePermeabilityConst
phase = 0
[]
[permeability1]
type = PorousFlowPermeabilityConst
permeability = '1.8e-11 0 0 0 1.8e-11 0 0 0 1.8e-11' # 1.8e-11 = a * kf
block = 'f1 f2'
[]
[permeability2]
type = PorousFlowPermeabilityConst
permeability = '1e-20 0 0 0 1e-20 0 0 0 1e-20'
block = 'matrix'
[]
[]
[Preconditioning]
active = basic
[mumps_is_best_for_parallel_jobs]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu mumps'
[]
[basic]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu NONZERO 2 '
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
end_time = 20
dt = 1
[]
[VectorPostprocessors]
[xmass]
type = LineValueSampler
start_point = '-0.5 0 0'
end_point = '0.5 0 0'
sort_by = x
num_points = 41
variable = tracer
outputs = csv
[]
[]
[Outputs]
[csv]
type = CSV
execute_on = 'final'
[]
[]
(modules/porous_flow/test/tests/jacobian/waterncg_twophase_nonisothermal.i)
# Tests correct calculation of properties derivatives in PorousFlowWaterNCG
# for nonisothermal two phase conditions
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 2
nx = 2
ny = 2
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[pgas]
[]
[z]
[]
[temperature]
[]
[]
[ICs]
[pgas]
type = RandomIC
min = 1e5
max = 5e5
variable = pgas
[]
[z]
type = RandomIC
min = 0.01
max = 0.06
variable = z
[]
[temperature]
type = RandomIC
min = 20
max = 80
variable = temperature
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pgas
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = z
fluid_component = 1
[]
[adv0]
type = PorousFlowAdvectiveFlux
variable = pgas
fluid_component = 0
[]
[adv1]
type = PorousFlowAdvectiveFlux
variable = z
fluid_component = 1
[]
[energy]
type = PorousFlowEnergyTimeDerivative
variable = temperature
[]
[heat]
type = PorousFlowHeatAdvection
variable = temperature
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas z temperature'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e1
pc_max = 1e4
[]
[fs]
type = PorousFlowWaterNCG
water_fp = water
gas_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[water]
type = Water97FluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temperature
[]
[waterncg]
type = PorousFlowFluidState
gas_porepressure = pgas
z = z
temperature = temperature
temperature_unit = Celsius
capillary_pressure = pc
fluid_state = fs
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1000
density = 2500
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[AuxVariables]
[sgas]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[sgas]
type = PorousFlowPropertyAux
property = saturation
phase = 1
variable = sgas
[]
[]
[Postprocessors]
[sgas_min]
type = ElementExtremeValue
variable = sgas
value_type = min
[]
[sgas_max]
type = ElementExtremeValue
variable = sgas
value_type = max
[]
[]
(modules/porous_flow/test/tests/fluidstate/theis_nonisothermal.i)
# Two-phase nonisothermal Theis problem: Flow from single source using WaterNCG fluidstate.
# Constant rate injection 2 kg/s of cold gas into warm reservoir
# 1D cylindrical mesh
# Initially, system has only a liquid phase, until enough gas is injected
# to form a gas phase, in which case the system becomes two phase.
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
nx = 40
xmin = 0.1
xmax = 200
bias_x = 1.05
[]
coord_type = RZ
rz_coord_axis = Y
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[AuxVariables]
[saturation_gas]
order = CONSTANT
family = MONOMIAL
[]
[x1]
order = CONSTANT
family = MONOMIAL
[]
[y0]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[saturation_gas]
type = PorousFlowPropertyAux
variable = saturation_gas
property = saturation
phase = 1
execute_on = timestep_end
[]
[x1]
type = PorousFlowPropertyAux
variable = x1
property = mass_fraction
phase = 0
fluid_component = 1
execute_on = timestep_end
[]
[y0]
type = PorousFlowPropertyAux
variable = y0
property = mass_fraction
phase = 1
fluid_component = 0
execute_on = timestep_end
[]
[]
[Variables]
[pgas]
initial_condition = 20e6
[]
[zi]
initial_condition = 0
[]
[temperature]
initial_condition = 70
scaling = 1e-4
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pgas
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pgas
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = zi
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = zi
[]
[energy]
type = PorousFlowEnergyTimeDerivative
variable = temperature
[]
[heatadv]
type = PorousFlowHeatAdvection
variable = temperature
[]
[conduction]
type = PorousFlowHeatConduction
variable = temperature
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas zi temperature'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[fs]
type = PorousFlowWaterNCG
water_fp = water
gas_fp = methane
capillary_pressure = pc
[]
[]
[FluidProperties]
[methane]
type = MethaneFluidProperties
[]
[water]
type = Water97FluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temperature
[]
[waterncg]
type = PorousFlowFluidState
gas_porepressure = pgas
z = zi
temperature = temperature
temperature_unit = Celsius
capillary_pressure = pc
fluid_state = fs
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.1
sum_s_res = 0.1
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
[]
[rockheat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1000
density = 2500
[]
[rock_thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '50 0 0 0 50 0 0 0 50'
[]
[]
[BCs]
[cold_gas]
type = DirichletBC
boundary = left
variable = temperature
value = 20
[]
[gas_injecton]
type = PorousFlowSink
boundary = left
variable = zi
flux_function = -0.159155
[]
[rightwater]
type = DirichletBC
boundary = right
value = 20e6
variable = pgas
[]
[righttemp]
type = DirichletBC
boundary = right
value = 70
variable = temperature
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu NONZERO 2'
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
end_time = 1e4
nl_abs_tol = 1e-7
nl_rel_tol = 1e-5
# Avoids failing first time step in parallel
line_search = 'none'
[TimeStepper]
type = IterationAdaptiveDT
dt = 1
growth_factor = 1.5
[]
[]
[Postprocessors]
[pgas]
type = PointValue
point = '2 0 0'
variable = pgas
[]
[sgas]
type = PointValue
point = '2 0 0'
variable = saturation_gas
[]
[zi]
type = PointValue
point = '2 0 0'
variable = zi
[]
[temperature]
type = PointValue
point = '2 0 0'
variable = temperature
[]
[massgas]
type = PorousFlowFluidMass
fluid_component = 1
[]
[x1]
type = PointValue
point = '2 0 0'
variable = x1
[]
[y0]
type = PointValue
point = '2 0 0'
variable = y0
[]
[]
[Outputs]
print_linear_residuals = false
perf_graph = true
csv = true
[]
(modules/porous_flow/test/tests/poro_elasticity/mandel_fully_saturated.i)
# Mandel's problem of consolodation of a drained medium
# Using the FullySaturatedDarcyBase and FullySaturatedMassTimeDerivative kernels
#
# A sample is in plane strain.
# -a <= x <= a
# -b <= y <= b
# It is squashed with constant force by impermeable, frictionless plattens on its top and bottom surfaces (at y=+/-b)
# Fluid is allowed to leak out from its sides (at x=+/-a)
# The porepressure within the sample is monitored.
#
# As is common in the literature, this is simulated by
# considering the quarter-sample, 0<=x<=a and 0<=y<=b, with
# impermeable, roller BCs at x=0 and y=0 and y=b.
# Porepressure is fixed at zero on x=a.
# Porepressure and displacement are initialised to zero.
# Then the top (y=b) is moved downwards with prescribed velocity,
# so that the total force that is inducing this downwards velocity
# is fixed. The velocity is worked out by solving Mandel's problem
# analytically, and the total force is monitored in the simulation
# to check that it indeed remains constant.
#
# Here are the problem's parameters, and their values:
# Soil width. a = 1
# Soil height. b = 0.1
# Soil's Lame lambda. la = 0.5
# Soil's Lame mu, which is also the Soil's shear modulus. mu = G = 0.75
# Soil bulk modulus. K = la + 2*mu/3 = 1
# Drained Poisson ratio. nu = (3K - 2G)/(6K + 2G) = 0.2
# Soil bulk compliance. 1/K = 1
# Fluid bulk modulus. Kf = 8
# Fluid bulk compliance. 1/Kf = 0.125
# Soil initial porosity. phi0 = 0.1
# Biot coefficient. alpha = 0.6
# Biot modulus. M = 1/(phi0/Kf + (alpha - phi0)(1 - alpha)/K) = 4.705882
# Undrained bulk modulus. Ku = K + alpha^2*M = 2.694118
# Undrained Poisson ratio. nuu = (3Ku - 2G)/(6Ku + 2G) = 0.372627
# Skempton coefficient. B = alpha*M/Ku = 1.048035
# Fluid mobility (soil permeability/fluid viscosity). k = 1.5
# Consolidation coefficient. c = 2*k*B^2*G*(1-nu)*(1+nuu)^2/9/(1-nuu)/(nuu-nu) = 3.821656
# Normal stress on top. F = 1
#
# The solution for porepressure and displacements is given in
# AHD Cheng and E Detournay "A direct boundary element method for plane strain poroelasticity" International Journal of Numerical and Analytical Methods in Geomechanics 12 (1988) 551-572.
# The solution involves complicated infinite series, so I shall not write it here
[Mesh]
type = GeneratedMesh
dim = 3
nx = 10
ny = 1
nz = 1
xmin = 0
xmax = 1
ymin = 0
ymax = 0.1
zmin = 0
zmax = 1
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
PorousFlowDictator = dictator
block = 0
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure disp_x disp_y disp_z'
number_fluid_phases = 1
number_fluid_components = 1
[]
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[porepressure]
[]
[]
[BCs]
[roller_xmin]
type = DirichletBC
variable = disp_x
value = 0
boundary = 'left'
[]
[roller_ymin]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'bottom'
[]
[plane_strain]
type = DirichletBC
variable = disp_z
value = 0
boundary = 'back front'
[]
[xmax_drained]
type = DirichletBC
variable = porepressure
value = 0
boundary = right
[]
[top_velocity]
type = FunctionDirichletBC
variable = disp_y
function = top_velocity
boundary = top
[]
[]
[Functions]
[top_velocity]
type = PiecewiseLinear
x = '0 0.002 0.006 0.014 0.03 0.046 0.062 0.078 0.094 0.11 0.126 0.142 0.158 0.174 0.19 0.206 0.222 0.238 0.254 0.27 0.286 0.302 0.318 0.334 0.35 0.366 0.382 0.398 0.414 0.43 0.446 0.462 0.478 0.494 0.51 0.526 0.542 0.558 0.574 0.59 0.606 0.622 0.638 0.654 0.67 0.686 0.702'
y = '-0.041824842 -0.042730269 -0.043412712 -0.04428867 -0.045509181 -0.04645965 -0.047268246 -0.047974749 -0.048597109 -0.0491467 -0.049632388 -0.050061697 -0.050441198 -0.050776675 -0.051073238 -0.0513354 -0.051567152 -0.051772022 -0.051953128 -0.052113227 -0.052254754 -0.052379865 -0.052490464 -0.052588233 -0.052674662 -0.052751065 -0.052818606 -0.052878312 -0.052931093 -0.052977751 -0.053018997 -0.053055459 -0.053087691 -0.053116185 -0.053141373 -0.05316364 -0.053183324 -0.053200724 -0.053216106 -0.053229704 -0.053241725 -0.053252351 -0.053261745 -0.053270049 -0.053277389 -0.053283879 -0.053289615'
[]
[]
[AuxVariables]
[stress_yy]
order = CONSTANT
family = MONOMIAL
[]
[tot_force]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
[]
[tot_force]
type = ParsedAux
coupled_variables = 'stress_yy porepressure'
execute_on = timestep_end
variable = tot_force
expression = '-stress_yy+0.6*porepressure'
[]
[]
[Kernels]
[grad_stress_x]
type = StressDivergenceTensors
variable = disp_x
component = 0
[]
[grad_stress_y]
type = StressDivergenceTensors
variable = disp_y
component = 1
[]
[grad_stress_z]
type = StressDivergenceTensors
variable = disp_z
component = 2
[]
[poro_x]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.6
variable = disp_x
component = 0
[]
[poro_y]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.6
variable = disp_y
component = 1
[]
[poro_z]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.6
component = 2
variable = disp_z
[]
[mass0]
type = PorousFlowFullySaturatedMassTimeDerivative
biot_coefficient = 0.6
coupling_type = HydroMechanical
variable = porepressure
[]
[flux]
type = PorousFlowFullySaturatedDarcyBase
variable = porepressure
gravity = '0 0 0'
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 8
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '0.5 0.75'
# bulk modulus is lambda + 2*mu/3 = 0.5 + 2*0.75/3 = 1
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[eff_fluid_pressure_qp]
type = PorousFlowEffectiveFluidPressure
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[ppss]
type = PorousFlow1PhaseFullySaturated
porepressure = porepressure
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid_qp]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst # only the initial value of this is ever used
porosity = 0.1
[]
[biot_modulus]
type = PorousFlowConstantBiotModulus
biot_coefficient = 0.6
solid_bulk_compliance = 1
fluid_bulk_modulus = 8
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.5 0 0 0 1.5 0 0 0 1.5'
[]
[]
[Postprocessors]
[p0]
type = PointValue
outputs = csv
point = '0.0 0 0'
variable = porepressure
[]
[p1]
type = PointValue
outputs = csv
point = '0.1 0 0'
variable = porepressure
[]
[p2]
type = PointValue
outputs = csv
point = '0.2 0 0'
variable = porepressure
[]
[p3]
type = PointValue
outputs = csv
point = '0.3 0 0'
variable = porepressure
[]
[p4]
type = PointValue
outputs = csv
point = '0.4 0 0'
variable = porepressure
[]
[p5]
type = PointValue
outputs = csv
point = '0.5 0 0'
variable = porepressure
[]
[p6]
type = PointValue
outputs = csv
point = '0.6 0 0'
variable = porepressure
[]
[p7]
type = PointValue
outputs = csv
point = '0.7 0 0'
variable = porepressure
[]
[p8]
type = PointValue
outputs = csv
point = '0.8 0 0'
variable = porepressure
[]
[p9]
type = PointValue
outputs = csv
point = '0.9 0 0'
variable = porepressure
[]
[p99]
type = PointValue
outputs = csv
point = '1 0 0'
variable = porepressure
[]
[xdisp]
type = PointValue
outputs = csv
point = '1 0.1 0'
variable = disp_x
[]
[ydisp]
type = PointValue
outputs = csv
point = '1 0.1 0'
variable = disp_y
[]
[total_downwards_force]
type = ElementAverageValue
outputs = csv
variable = tot_force
[]
[dt]
type = FunctionValuePostprocessor
outputs = console
function = if(0.15*t<0.01,0.15*t,0.01)
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu 1E-14 1E-10 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
start_time = 0
end_time = 0.7
[TimeStepper]
type = PostprocessorDT
postprocessor = dt
dt = 0.001
[]
[]
[Outputs]
execute_on = 'timestep_end'
file_base = mandel_fully_saturated
[csv]
time_step_interval = 3
type = CSV
[]
[]
(modules/porous_flow/test/tests/actions/basicthm_hm.i)
# PorousFlowBasicTHM action with coupling_type = HydroMechanical
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
nx = 10
ny = 3
xmax = 10
ymax = 3
[]
[aquifer]
input = gen
type = SubdomainBoundingBoxGenerator
block_id = 1
bottom_left = '0 1 0'
top_right = '10 2 0'
[]
[injection_area]
type = SideSetsAroundSubdomainGenerator
block = 1
new_boundary = 'injection_area'
normal = '-1 0 0'
input = 'aquifer'
[]
[outflow_area]
type = SideSetsAroundSubdomainGenerator
block = 1
new_boundary = 'outflow_area'
normal = '1 0 0'
input = 'injection_area'
[]
[rename]
type = RenameBlockGenerator
old_block = '0 1'
new_block = 'caprock aquifer'
input = 'outflow_area'
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
displacements = 'disp_x disp_y'
biot_coefficient = 1.0
[]
[Variables]
[porepressure]
initial_condition = 1e6
[]
[disp_x]
scaling = 1e-10
[]
[disp_y]
scaling = 1e-10
[]
[]
[AuxVariables]
[temperature]
initial_condition = 293
[]
[]
[PorousFlowBasicTHM]
porepressure = porepressure
temperature = temperature
coupling_type = HydroMechanical
gravity = '0 0 0'
fp = simple_fluid
use_displaced_mesh = false
add_stress_aux = false
[]
[BCs]
[constant_injection_porepressure]
type = DirichletBC
variable = porepressure
value = 1.5e6
boundary = injection_area
[]
[constant_outflow_porepressure]
type = PorousFlowPiecewiseLinearSink
variable = porepressure
boundary = outflow_area
pt_vals = '0 1e9'
multipliers = '0 1e9'
flux_function = 1e-6
PT_shift = 1e6
[]
[top_bottom]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'top bottom'
[]
[right]
type = DirichletBC
variable = disp_x
value = 0
boundary = right
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[biot_modulus]
type = PorousFlowConstantBiotModulus
solid_bulk_compliance = 2e-7
fluid_bulk_modulus = 1e7
[]
[permeability_aquifer]
type = PorousFlowPermeabilityConst
block = aquifer
permeability = '1e-13 0 0 0 1e-13 0 0 0 1e-13'
[]
[permeability_caprock]
type = PorousFlowPermeabilityConst
block = caprock
permeability = '1e-15 0 0 0 1e-15 0 0 0 1e-15'
[]
[elasticity_tensor]
type = ComputeIsotropicElasticityTensor
youngs_modulus = 5e9
poissons_ratio = 0.0
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[]
[Preconditioning]
[basic]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1e4
dt = 1e3
nl_abs_tol = 1e-14
nl_rel_tol = 1e-14
[]
[Outputs]
exodus = true
[]
(modules/porous_flow/test/tests/poro_elasticity/mandel_basicthm.i)
# using a BasicTHM Action
#
# Mandel's problem of consolodation of a drained medium
# Using the FullySaturatedDarcyBase and FullySaturatedFullySaturatedMassTimeDerivative kernels
# with multiply_by_density = false, so that this problem becomes linear
#
# A sample is in plane strain.
# -a <= x <= a
# -b <= y <= b
# It is squashed with constant force by impermeable, frictionless plattens on its top and bottom surfaces (at y=+/-b)
# Fluid is allowed to leak out from its sides (at x=+/-a)
# The porepressure within the sample is monitored.
#
# As is common in the literature, this is simulated by
# considering the quarter-sample, 0<=x<=a and 0<=y<=b, with
# impermeable, roller BCs at x=0 and y=0 and y=b.
# Porepressure is fixed at zero on x=a.
# Porepressure and displacement are initialised to zero.
# Then the top (y=b) is moved downwards with prescribed velocity,
# so that the total force that is inducing this downwards velocity
# is fixed. The velocity is worked out by solving Mandel's problem
# analytically, and the total force is monitored in the simulation
# to check that it indeed remains constant.
#
# Here are the problem's parameters, and their values:
# Soil width. a = 1
# Soil height. b = 0.1
# Soil's Lame lambda. la = 0.5
# Soil's Lame mu, which is also the Soil's shear modulus. mu = G = 0.75
# Soil bulk modulus. K = la + 2*mu/3 = 1
# Drained Poisson ratio. nu = (3K - 2G)/(6K + 2G) = 0.2
# Soil bulk compliance. 1/K = 1
# Fluid bulk modulus. Kf = 8
# Fluid bulk compliance. 1/Kf = 0.125
# Soil initial porosity. phi0 = 0.1
# Biot coefficient. alpha = 0.6
# Biot modulus. M = 1/(phi0/Kf + (alpha - phi0)(1 - alpha)/K) = 4.705882
# Undrained bulk modulus. Ku = K + alpha^2*M = 2.694118
# Undrained Poisson ratio. nuu = (3Ku - 2G)/(6Ku + 2G) = 0.372627
# Skempton coefficient. B = alpha*M/Ku = 1.048035
# Fluid mobility (soil permeability/fluid viscosity). k = 1.5
# Consolidation coefficient. c = 2*k*B^2*G*(1-nu)*(1+nuu)^2/9/(1-nuu)/(nuu-nu) = 3.821656
# Normal stress on top. F = 1
#
# The solution for porepressure and displacements is given in
# AHD Cheng and E Detournay "A direct boundary element method for plane strain poroelasticity" International Journal of Numerical and Analytical Methods in Geomechanics 12 (1988) 551-572.
# The solution involves complicated infinite series, so I shall not write it here
[Mesh]
type = GeneratedMesh
dim = 3
nx = 10
ny = 1
nz = 1
xmin = 0
xmax = 1
ymin = 0
ymax = 0.1
zmin = 0
zmax = 1
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
PorousFlowDictator = dictator
block = 0
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[porepressure]
[]
[]
[BCs]
[roller_xmin]
type = DirichletBC
variable = disp_x
value = 0
boundary = 'left'
[]
[roller_ymin]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'bottom'
[]
[plane_strain]
type = DirichletBC
variable = disp_z
value = 0
boundary = 'back front'
[]
[xmax_drained]
type = DirichletBC
variable = porepressure
value = 0
boundary = right
[]
[top_velocity]
type = FunctionDirichletBC
variable = disp_y
function = top_velocity
boundary = top
[]
[]
[Functions]
[top_velocity]
type = PiecewiseLinear
x = '0 0.002 0.006 0.014 0.03 0.046 0.062 0.078 0.094 0.11 0.126 0.142 0.158 0.174 0.19 0.206 0.222 0.238 0.254 0.27 0.286 0.302 0.318 0.334 0.35 0.366 0.382 0.398 0.414 0.43 0.446 0.462 0.478 0.494 0.51 0.526 0.542 0.558 0.574 0.59 0.606 0.622 0.638 0.654 0.67 0.686 0.702'
y = '-0.041824842 -0.042730269 -0.043412712 -0.04428867 -0.045509181 -0.04645965 -0.047268246 -0.047974749 -0.048597109 -0.0491467 -0.049632388 -0.050061697 -0.050441198 -0.050776675 -0.051073238 -0.0513354 -0.051567152 -0.051772022 -0.051953128 -0.052113227 -0.052254754 -0.052379865 -0.052490464 -0.052588233 -0.052674662 -0.052751065 -0.052818606 -0.052878312 -0.052931093 -0.052977751 -0.053018997 -0.053055459 -0.053087691 -0.053116185 -0.053141373 -0.05316364 -0.053183324 -0.053200724 -0.053216106 -0.053229704 -0.053241725 -0.053252351 -0.053261745 -0.053270049 -0.053277389 -0.053283879 -0.053289615'
[]
[]
[AuxVariables]
[tot_force]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[tot_force]
type = ParsedAux
coupled_variables = 'stress_yy porepressure'
execute_on = timestep_end
variable = tot_force
expression = '-stress_yy+0.6*porepressure'
[]
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
thermal_expansion = 0.0
bulk_modulus = 8.0
viscosity = 1.0
density0 = 1.0
[]
[]
[PorousFlowBasicTHM]
coupling_type = HydroMechanical
displacements = 'disp_x disp_y disp_z'
multiply_by_density = false
porepressure = porepressure
biot_coefficient = 0.6
gravity = '0 0 0'
fp = the_simple_fluid
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '0.5 0.75'
# bulk modulus is lambda + 2*mu/3 = 0.5 + 2*0.75/3 = 1
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[porosity]
type = PorousFlowPorosityConst # only the initial value of this is ever used
porosity = 0.1
[]
[biot_modulus]
type = PorousFlowConstantBiotModulus
biot_coefficient = 0.6
solid_bulk_compliance = 1
fluid_bulk_modulus = 8
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.5 0 0 0 1.5 0 0 0 1.5'
[]
[]
[Postprocessors]
[p0]
type = PointValue
outputs = csv
point = '0.0 0 0'
variable = porepressure
[]
[p1]
type = PointValue
outputs = csv
point = '0.1 0 0'
variable = porepressure
[]
[p2]
type = PointValue
outputs = csv
point = '0.2 0 0'
variable = porepressure
[]
[p3]
type = PointValue
outputs = csv
point = '0.3 0 0'
variable = porepressure
[]
[p4]
type = PointValue
outputs = csv
point = '0.4 0 0'
variable = porepressure
[]
[p5]
type = PointValue
outputs = csv
point = '0.5 0 0'
variable = porepressure
[]
[p6]
type = PointValue
outputs = csv
point = '0.6 0 0'
variable = porepressure
[]
[p7]
type = PointValue
outputs = csv
point = '0.7 0 0'
variable = porepressure
[]
[p8]
type = PointValue
outputs = csv
point = '0.8 0 0'
variable = porepressure
[]
[p9]
type = PointValue
outputs = csv
point = '0.9 0 0'
variable = porepressure
[]
[p99]
type = PointValue
outputs = csv
point = '1 0 0'
variable = porepressure
[]
[xdisp]
type = PointValue
outputs = csv
point = '1 0.1 0'
variable = disp_x
[]
[ydisp]
type = PointValue
outputs = csv
point = '1 0.1 0'
variable = disp_y
[]
[total_downwards_force]
type = ElementAverageValue
outputs = csv
variable = tot_force
[]
[dt]
type = FunctionValuePostprocessor
outputs = console
function = if(0.15*t<0.01,0.15*t,0.01)
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu 1E-14 1E-10 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
start_time = 0
end_time = 0.7
[TimeStepper]
type = PostprocessorDT
postprocessor = dt
dt = 0.001
[]
[]
[Outputs]
execute_on = 'timestep_end'
file_base = mandel_basicthm
[csv]
time_step_interval = 3
type = CSV
[]
[]
(modules/porous_flow/examples/tidal/barometric_fully_confined.i)
# A fully-confined aquifer is fully saturated with water
# Barometric loading is applied to the aquifer.
# Because the aquifer is assumed to be sandwiched between
# impermeable aquitards, the barometric pressure is not felt
# directly by the porepressure. Instead, the porepressure changes
# only because the barometric loading applies a total stress to
# the top surface of the aquifer.
#
# To replicate standard poroelasticity exactly:
# (1) the PorousFlowBasicTHM Action is used;
# (2) multiply_by_density = false;
# (3) PorousFlowConstantBiotModulus is used
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = 0
xmax = 1
ymin = 0
ymax = 1
zmin = 0
zmax = 1
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
PorousFlowDictator = dictator
block = 0
biot_coefficient = 0.6
multiply_by_density = false
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[porepressure]
[]
[]
[BCs]
[fix_x]
type = DirichletBC
variable = disp_x
value = 0.0
boundary = 'left right'
[]
[fix_y]
type = DirichletBC
variable = disp_y
value = 0.0
boundary = 'bottom top'
[]
[fix_z_bottom]
type = DirichletBC
variable = disp_z
value = 0.0
boundary = back
[]
[barometric_loading]
type = FunctionNeumannBC
variable = disp_z
function = -1000.0 # atmospheric pressure increase of 1kPa
boundary = front
[]
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2E9
[]
[]
[PorousFlowBasicTHM]
coupling_type = HydroMechanical
displacements = 'disp_x disp_y disp_z'
porepressure = porepressure
gravity = '0 0 0'
fp = the_simple_fluid
[]
[Materials]
[elasticity_tensor]
type = ComputeIsotropicElasticityTensor
bulk_modulus = 10.0E9 # drained bulk modulus
poissons_ratio = 0.25
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[porosity]
type = PorousFlowPorosityConst # only the initial value of this is ever used
porosity = 0.1
[]
[biot_modulus]
type = PorousFlowConstantBiotModulus
solid_bulk_compliance = 1E-10
fluid_bulk_modulus = 2E9
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[]
[Postprocessors]
[pp]
type = PointValue
point = '0.5 0.5 0.5'
variable = porepressure
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
console = true
csv = true
[]
(modules/porous_flow/test/tests/heat_advection/heat_advection_1d_fully_saturated_action.i)
# 1phase, heat advecting with a moving fluid
# Using the PorousFlowFullySaturated Action with various stabilization options
# With stabilization=none, this should produce an identical result to heat_advection_1d_fully_saturated.i
# With stabilization=Full, this should produce an identical result to heat_advection_1d.i and heat_advection_1d_fullsat.i
# With stabilization=KT, this should produce an identical result to heat_advection_1D_KT.i
[Mesh]
type = GeneratedMesh
dim = 1
nx = 50
xmin = 0
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[temp]
initial_condition = 200
[]
[pp]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = '1-x'
[]
[]
[BCs]
[pp0]
type = DirichletBC
variable = pp
boundary = left
value = 1
[]
[pp1]
type = DirichletBC
variable = pp
boundary = right
value = 0
[]
[spit_heat]
type = DirichletBC
variable = temp
boundary = left
value = 300
[]
[suck_heat]
type = DirichletBC
variable = temp
boundary = right
value = 200
[]
[]
[PorousFlowFullySaturated]
porepressure = pp
temperature = temp
coupling_type = ThermoHydro
fp = simple_fluid
add_darcy_aux = false
stabilization = none
flux_limiter_type = superbee
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 100
density0 = 1000
viscosity = 4.4
thermal_expansion = 0
cv = 2
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[zero_thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '0 0 0 0 0 0 0 0 0'
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1.0
density = 125
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.1 0 0 0 2 0 0 0 3'
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 0.01
end_time = 0.6
[]
[VectorPostprocessors]
[T]
type = LineValueSampler
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 51
sort_by = x
variable = temp
[]
[]
[Outputs]
file_base = heat_advection_1d_fully_saturation_action
[csv]
type = CSV
sync_times = '0.1 0.6'
sync_only = true
[]
[]
(modules/porous_flow/test/tests/dirackernels/theis_rz.i)
# Theis problem: Flow to single sink using BasicTHM
# SinglePhase
# RZ mesh
[Mesh]
type = GeneratedMesh
dim = 1
nx = 20
xmax = 100
bias_x = 1.05
coord_type = RZ
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 20E6
[]
[]
[PorousFlowBasicTHM]
dictator_name = dictator
add_darcy_aux = false
fp = simple_fluid
gravity = '0 0 0'
multiply_by_density = false
porepressure = pp
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
viscosity = 0.001
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.05
[]
[biot_mod]
type = PorousFlowConstantBiotModulus
fluid_bulk_modulus = 2E9
biot_coefficient = 1.0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-14 0 0 0 1E-14 0 0 0 1E-14'
[]
[]
[DiracKernels]
[sink]
type = PorousFlowSquarePulsePointSource
point = '0 0 0'
mass_flux = -0.16E-3 # recall this is a volumetric flux because multiply_by_density = false in the Action, so this corresponds to a mass_flux of 0.16 kg/s/m because density=1000
variable = pp
[]
[]
[VectorPostprocessors]
[pp]
type = LineValueSampler
num_points = 25
start_point = '0 0 0'
end_point = '100 0 0'
sort_by = x
variable = pp
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 200
end_time = 1E3
nl_abs_tol = 1e-10
[]
[Outputs]
perf_graph = true
[csv]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/examples/co2_intercomparison/1Dradial/1Dradial.i)
# Intercomparison problem 3: Radial flow from an injection well
#
# From Pruess et al, Code intercomparison builds confidence in
# numerical simulation models for geologic disposal of CO2, Energy 29 (2004)
#
# A variation with zero salinity can be run by changing the initial condition
# of the AuxVariable xnacl
[Mesh]
type = GeneratedMesh
dim = 1
nx = 500
xmax = 10000
bias_x = 1.01
coord_type = 'RZ'
rz_coord_axis = Y
[]
[GlobalParams]
PorousFlowDictator = 'dictator'
gravity = '0 0 0'
[]
[AuxVariables]
[pressure_liquid]
order = CONSTANT
family = MONOMIAL
[]
[saturation_gas]
order = CONSTANT
family = MONOMIAL
[]
[x1]
order = CONSTANT
family = MONOMIAL
[]
[y0]
order = CONSTANT
family = MONOMIAL
[]
[xnacl]
initial_condition = 0.15
[]
[]
[AuxKernels]
[pressure_liquid]
type = PorousFlowPropertyAux
variable = pressure_liquid
property = pressure
phase = 0
execute_on = 'timestep_end'
[]
[saturation_gas]
type = PorousFlowPropertyAux
variable = saturation_gas
property = saturation
phase = 1
execute_on = 'timestep_end'
[]
[x1]
type = PorousFlowPropertyAux
variable = x1
property = mass_fraction
phase = 0
fluid_component = 1
execute_on = 'timestep_end'
[]
[y0]
type = PorousFlowPropertyAux
variable = y0
property = mass_fraction
phase = 1
fluid_component = 0
execute_on = 'timestep_end'
[]
[]
[Variables]
[pgas]
initial_condition = 12e6
[]
[zi]
initial_condition = 0
scaling = 1e4
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pgas
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pgas
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = zi
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = zi
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas zi'
number_fluid_phases = 2
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 5.099e-5
m = 0.457
sat_lr = 0.0
pc_max = 1e7
[]
[fs]
type = PorousFlowBrineCO2
brine_fp = brine
co2_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2sw]
type = CO2FluidProperties
[]
[co2]
type = TabulatedBicubicFluidProperties
fp = co2sw
[]
[water]
type = Water97FluidProperties
[]
[watertab]
type = TabulatedBicubicFluidProperties
fp = water
temperature_min = 273.15
temperature_max = 573.15
fluid_property_output_file = water_fluid_properties.csv
# Comment out the fp parameter and uncomment below to use the newly generated tabulation
# fluid_property_file = water_fluid_properties.csv
[]
[brine]
type = BrineFluidProperties
water_fp = watertab
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = '45'
[]
[brineco2]
type = PorousFlowFluidState
gas_porepressure = 'pgas'
z = 'zi'
temperature_unit = Celsius
xnacl = 'xnacl'
capillary_pressure = pc
fluid_state = fs
[]
[porosity]
type = PorousFlowPorosityConst
porosity = '0.12'
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-13 0 0 0 1e-13 0 0 0 1e-13'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityVG
m = 0.457
phase = 0
s_res = 0.3
sum_s_res = 0.35
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
s_res = 0.05
sum_s_res = 0.35
[]
[]
[BCs]
[rightwater]
type = PorousFlowPiecewiseLinearSink
boundary = 'right'
variable = pgas
use_mobility = true
PorousFlowDictator = dictator
fluid_phase = 0
multipliers = '0 1e9'
PT_shift = '12e6'
pt_vals = '0 1e9'
mass_fraction_component = 0
use_relperm = true
[]
[rightco2]
type = PorousFlowPiecewiseLinearSink
variable = zi
boundary = 'right'
use_mobility = true
PorousFlowDictator = dictator
fluid_phase = 1
multipliers = '0 1e9'
PT_shift = '12e6'
pt_vals = '0 1e9'
mass_fraction_component = 1
use_relperm = true
[]
[]
[DiracKernels]
[source]
type = PorousFlowSquarePulsePointSource
point = '0 0 0'
mass_flux = 1
variable = zi
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'gmres bjacobi lu NONZERO'
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
end_time = 8.64e8
nl_max_its = 25
l_max_its = 100
dtmax = 5e6
[TimeStepper]
type = IterationAdaptiveDT
dt = 100
[]
[]
[VectorPostprocessors]
[vars]
type = NodalValueSampler
sort_by = x
variable = 'pgas zi xnacl'
execute_on = 'timestep_end'
outputs = spatial
[]
[auxvars]
type = ElementValueSampler
sort_by = x
variable = 'saturation_gas x1 y0'
execute_on = 'timestep_end'
outputs = spatial
[]
[]
[Postprocessors]
[pgas]
type = PointValue
point = '25.25 0 0'
variable = pgas
outputs = time
[]
[sgas]
type = PointValue
point = '25.25 0 0'
variable = saturation_gas
outputs = time
[]
[zi]
type = PointValue
point = '25.25 0 0'
variable = zi
outputs = time
[]
[massgas]
type = PorousFlowFluidMass
fluid_component = 1
outputs = time
[]
[x1]
type = PointValue
point = '25.25 0 0'
variable = x1
outputs = time
[]
[y0]
type = PointValue
point = '25.25 0 0'
variable = y0
outputs = time
[]
[xnacl]
type = PointValue
point = '25.25 0 0'
variable = xnacl
outputs = time
[]
[]
[Outputs]
print_linear_residuals = false
perf_graph = true
sync_times = '2.592e6 8.64e6 8.64e7 8.64e8'
[time]
type = CSV
[]
[spatial]
type = CSV
sync_only = true
[]
[]
(modules/porous_flow/examples/groundwater/ex02_steady_state.i)
# Steady-state groundwater model. See groundwater_models.md for a detailed description
[Mesh]
[basic_mesh]
# mesh create by external program: lies within -500<=x<=500 and -200<=y<=200, with varying z
type = FileMeshGenerator
file = ex02_mesh.e
[]
[name_blocks]
type = RenameBlockGenerator
input = basic_mesh
old_block = '2 3 4'
new_block = 'bot_aquifer aquitard top_aquifer'
[]
[zmax]
type = SideSetsFromNormalsGenerator
input = name_blocks
normal_tol = 0.1
new_boundary = zmax
normals = '0 0 1'
[]
[xmin_bot_aquifer]
type = ParsedGenerateSideset
input = zmax
included_subdomains = 2
normal = '-1 0 0'
combinatorial_geometry = 'x <= -500.0'
new_sideset_name = xmin_bot_aquifer
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = initial_pp
[]
[]
[BCs]
[rainfall_recharge]
type = PorousFlowSink
boundary = zmax
variable = pp
flux_function = -1E-6 # recharge of 0.1mm/day = 1E-4m3/m2/day = 0.1kg/m2/day ~ 1E-6kg/m2/s
[]
[evapotranspiration]
type = PorousFlowHalfCubicSink
boundary = zmax
variable = pp
center = 0.0
cutoff = -5E4 # roots of depth 5m. 5m of water = 5E4 Pa
use_mobility = true
fluid_phase = 0
# Assume pan evaporation of 4mm/day = 4E-3m3/m2/day = 4kg/m2/day ~ 4E-5kg/m2/s
# Assume that if permeability was 1E-10m^2 and water table at topography then ET acts as pan strength
# Because use_mobility = true, then 4E-5 = maximum_flux = max * perm * density / visc = max * 1E-4, so max = 40
max = 40
[]
[]
[DiracKernels]
[river]
type = PorousFlowPolyLineSink
SumQuantityUO = baseflow
point_file = ex02_river.bh
# Assume a perennial river.
# Assume the river has an incision depth of 1m and a stage height of 1.5m, and these are constant in time and uniform over the whole model. Hence, if groundwater head is 0.5m (5000Pa) there will be no baseflow and leakage.
p_or_t_vals = '-999995000 5000 1000005000'
# Assume the riverbed conductance, k_zz*density*river_segment_length*river_width/riverbed_thickness/viscosity = 1E-6*river_segment_length kg/Pa/s
fluxes = '-1E3 0 1E3'
variable = pp
[]
[]
[Functions]
[initial_pp]
type = SolutionFunction
scale_factor = 1E4
from_variable = cosflow_depth
solution = initial_mesh
[]
[baseflow_rate]
type = ParsedFunction
symbol_names = 'baseflow_kg dt'
symbol_values = 'baseflow_kg dt'
expression = 'baseflow_kg / dt * 24.0 * 3600.0 / 400.0'
[]
[]
[PorousFlowUnsaturated]
fp = simple_fluid
porepressure = pp
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
[]
[]
[Materials]
[porosity_everywhere]
type = PorousFlowPorosityConst
porosity = 0.05
[]
[permeability_aquifers]
type = PorousFlowPermeabilityConst
block = 'top_aquifer bot_aquifer'
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-13'
[]
[permeability_aquitard]
type = PorousFlowPermeabilityConst
block = aquitard
permeability = '1E-16 0 0 0 1E-16 0 0 0 1E-17'
[]
[]
[UserObjects]
[initial_mesh]
type = SolutionUserObject
execute_on = INITIAL
mesh = ex02_mesh.e
timestep = LATEST
system_variables = cosflow_depth
[]
[baseflow]
type = PorousFlowSumQuantity
[]
[]
[Postprocessors]
[baseflow_kg]
type = PorousFlowPlotQuantity
uo = baseflow
outputs = 'none'
[]
[dt]
type = TimestepSize
outputs = 'none'
[]
[baseflow_l_per_m_per_day]
type = FunctionValuePostprocessor
function = baseflow_rate
indirect_dependencies = 'baseflow_kg dt'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
# following 2 lines are not mandatory, but illustrate a popular preconditioner choice in groundwater models
petsc_options_iname = '-pc_type -sub_pc_type -pc_asm_overlap'
petsc_options_value = ' asm ilu 2 '
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E6
[TimeStepper]
type = FunctionDT
function = 'max(1E6, t)'
[]
end_time = 1E12
nl_abs_tol = 1E-13
[]
[Outputs]
print_linear_residuals = false
[ex]
type = Exodus
execute_on = final
[]
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/gravity/grav01c.i)
# Checking that gravity head is established
# 1phase, vanGenuchten, constant fluid-bulk, constant viscosity, constant permeability, Corey relative perm
# unsaturated
# For better agreement with the analytical solution (ana_pp), just increase nx
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
xmin = -1
xmax = 0
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[InitialCondition]
type = RandomIC
min = -1
max = 1
[]
[]
[]
[Kernels]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
gravity = '-1 0 0'
[]
[]
[Functions]
[ana_pp]
type = ParsedFunction
symbol_names = 'g B p0 rho0'
symbol_values = '1 2 -1 1'
expression = '-B*log(exp(-p0/B)+g*rho0*x/B)' # expected pp at base
[]
[]
[BCs]
[z]
type = DirichletBC
variable = pp
boundary = right
value = -1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2
density0 = 1
viscosity = 1
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[]
[Postprocessors]
[pp_base]
type = PointValue
variable = pp
point = '-1 0 0'
[]
[pp_analytical]
type = FunctionValuePostprocessor
function = ana_pp
point = '-1 0 0'
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Steady
solve_type = Newton
[]
[Outputs]
execute_on = 'timestep_end'
file_base = grav01c
exodus = true
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phase_monomial.i)
# Pressure pulse in 1D with 2 phases (with one having zero saturation), 2components - transient
#
# Note: this is identical to pressure_pules_1d_2phase.i, except that the mass fraction AuxVariables are
# constant monomials. The result should be identical though.
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
initial_condition = 2E6
[]
[ppgas]
initial_condition = 2E6
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
order = CONSTANT
family = MONOMIAL
initial_condition = 1
[]
[massfrac_ph1_sp0]
order = CONSTANT
family = MONOMIAL
initial_condition = 0
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
variable = ppwater
gravity = '0 0 0'
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = ppgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
variable = ppgas
gravity = '0 0 0'
fluid_component = 1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 2e6
density0 = 1
thermal_expansion = 0
viscosity = 1e-5
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-15'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 1
[]
[]
[BCs]
[leftwater]
type = DirichletBC
boundary = left
value = 3E6
variable = ppwater
[]
[leftgas]
type = DirichletBC
boundary = left
value = 3E6
variable = ppgas
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu NONZERO 2 1E-15 1E-20 20'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E3
end_time = 1E4
[]
[Postprocessors]
[p000]
type = PointValue
variable = ppwater
point = '0 0 0'
execute_on = 'initial timestep_end'
[]
[p010]
type = PointValue
variable = ppwater
point = '10 0 0'
execute_on = 'initial timestep_end'
[]
[p020]
type = PointValue
variable = ppwater
point = '20 0 0'
execute_on = 'initial timestep_end'
[]
[p030]
type = PointValue
variable = ppwater
point = '30 0 0'
execute_on = 'initial timestep_end'
[]
[p040]
type = PointValue
variable = ppwater
point = '40 0 0'
execute_on = 'initial timestep_end'
[]
[p050]
type = PointValue
variable = ppwater
point = '50 0 0'
execute_on = 'initial timestep_end'
[]
[p060]
type = PointValue
variable = ppwater
point = '60 0 0'
execute_on = 'initial timestep_end'
[]
[p070]
type = PointValue
variable = ppwater
point = '70 0 0'
execute_on = 'initial timestep_end'
[]
[p080]
type = PointValue
variable = ppwater
point = '80 0 0'
execute_on = 'initial timestep_end'
[]
[p090]
type = PointValue
variable = ppwater
point = '90 0 0'
execute_on = 'initial timestep_end'
[]
[p100]
type = PointValue
variable = ppwater
point = '100 0 0'
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
file_base = pressure_pulse_1d_2phase
print_linear_residuals = false
csv = true
[]
(modules/porous_flow/test/tests/jacobian/brineco2_twophase_nonisothermal.i)
# Tests correct calculation of properties derivatives in PorousFlowFluidState
# for nonisothermal two phase conditions, including salt as a nonlinear variable
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 2
nx = 2
ny = 2
xmax = 10
ymax = 10
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[pgas]
[]
[zi]
scaling = 1e-4
[]
[xnacl]
[]
[temperature]
scaling = 1e-7
[]
[]
[ICs]
[pgas]
type = RandomIC
min = 1e6
max = 4e6
variable = pgas
seed = 1
[]
[z]
type = RandomIC
min = 0.2
max = 0.8
variable = zi
seed = 1
[]
[xnacl]
type = RandomIC
min = 0.01
max = 0.15
variable = xnacl
seed = 1
[]
[temperature]
type = RandomIC
min = 20
max = 80
variable = temperature
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pgas
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = zi
fluid_component = 1
[]
[mass2]
type = PorousFlowMassTimeDerivative
variable = xnacl
fluid_component = 2
[]
[adv0]
type = PorousFlowAdvectiveFlux
variable = pgas
fluid_component = 0
[]
[adv1]
type = PorousFlowAdvectiveFlux
variable = zi
fluid_component = 1
[]
[adv2]
type = PorousFlowAdvectiveFlux
variable = xnacl
fluid_component = 2
[]
[energy]
type = PorousFlowEnergyTimeDerivative
variable = temperature
[]
[heat]
type = PorousFlowHeatAdvection
variable = temperature
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas zi xnacl temperature'
number_fluid_phases = 2
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
pc_max = 1e3
[]
[fs]
type = PorousFlowBrineCO2
brine_fp = brine
co2_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[brine]
type = BrineFluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temperature
[]
[brineco2]
type = PorousFlowFluidState
gas_porepressure = pgas
z = zi
temperature = temperature
temperature_unit = Celsius
xnacl = xnacl
capillary_pressure = pc
fluid_state = fs
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1000
density = 2500
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_steady.i)
# Pressure pulse in 1D with 1 phase - steady
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 2E6
[]
[]
[Kernels]
active = flux
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = pp
gravity = '0 0 0'
fluid_component = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-15'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0
phase = 0
[]
[]
[BCs]
[left]
type = DirichletBC
boundary = left
value = 3E6
variable = pp
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-20 10000'
[]
[]
[Executioner]
type = Steady
solve_type = Newton
[]
[Postprocessors]
[p000]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = 'initial timestep_end'
[]
[p010]
type = PointValue
variable = pp
point = '10 0 0'
execute_on = 'initial timestep_end'
[]
[p020]
type = PointValue
variable = pp
point = '20 0 0'
execute_on = 'initial timestep_end'
[]
[p030]
type = PointValue
variable = pp
point = '30 0 0'
execute_on = 'initial timestep_end'
[]
[p040]
type = PointValue
variable = pp
point = '40 0 0'
execute_on = 'initial timestep_end'
[]
[p050]
type = PointValue
variable = pp
point = '50 0 0'
execute_on = 'initial timestep_end'
[]
[p060]
type = PointValue
variable = pp
point = '60 0 0'
execute_on = 'initial timestep_end'
[]
[p070]
type = PointValue
variable = pp
point = '70 0 0'
execute_on = 'initial timestep_end'
[]
[p080]
type = PointValue
variable = pp
point = '80 0 0'
execute_on = 'initial timestep_end'
[]
[p090]
type = PointValue
variable = pp
point = '90 0 0'
execute_on = 'initial timestep_end'
[]
[p100]
type = PointValue
variable = pp
point = '100 0 0'
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
file_base = pressure_pulse_1d_steady
print_linear_residuals = false
csv = true
[]
(modules/porous_flow/test/tests/actions/unsat_except1.i)
# Check PorousFlowUnsaturated throws an error when stabilization = none
[Mesh]
type = GeneratedMesh
dim = 1
nx = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[PorousFlowUnsaturated]
porepressure = pp
dictator_name = dictator
fp = simple_fluid
stabilization = none
[]
[Variables]
[pp]
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
[]
[]
[Materials]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-13 0 0 0 1E-13 0 0 0 1E-13'
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.3
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
(modules/porous_flow/examples/flow_through_fractured_media/fine_thick_fracture_steady.i)
# Using a single-dimensional mesh
# Steady-state porepressure distribution along a fracture in a porous matrix
# This is used to initialise the transient solute-transport simulation
[Mesh]
type = FileMesh
# The gold mesh is used to reduce the number of large files in the MOOSE repository.
# The porepressure is not read from the gold mesh
file = 'gold/fine_thick_fracture_steady_out.e'
block_id = '1 2 3'
block_name = 'fracture matrix1 matrix2'
boundary_id = '1 2'
boundary_name = 'bottom top'
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[pp]
[]
[]
[ICs]
[pp]
type = ConstantIC
variable = pp
value = 1e6
[]
[]
[BCs]
[ptop]
type = DirichletBC
variable = pp
boundary = top
value = 1e6
[]
[pbottom]
type = DirichletBC
variable = pp
boundary = bottom
value = 1.002e6
[]
[]
[Kernels]
[adv0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseFullySaturated
porepressure = pp
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[relp]
type = PorousFlowRelativePermeabilityConst
phase = 0
[]
[permeability1]
type = PorousFlowPermeabilityConst
permeability = '3e-8 0 0 0 3e-8 0 0 0 3e-8' # the true permeability is used without scaling by aperture
block = 'fracture'
[]
[permeability2]
type = PorousFlowPermeabilityConst
permeability = '1e-20 0 0 0 1e-20 0 0 0 1e-20'
block = 'matrix1 matrix2'
[]
[]
[Preconditioning]
active = basic
[mumps_is_best_for_parallel_jobs]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu mumps'
[]
[basic]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu NONZERO 2 '
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
# controls for nonlinear iterations
nl_abs_tol = 1e-9
nl_rel_tol = 1e-10
[]
[Outputs]
exodus = true
execute_on = 'timestep_end'
[]
(modules/porous_flow/test/tests/sinks/s13.i)
# Apply a PorousFlowOutflowBC to the right-hand side and watch fluid flow to it
#
# This test has a single phase with two components. The test initialises with
# the porous material fully filled with component=1. The left-hand side is fixed
# at porepressure=1 and mass-fraction of the zeroth component being unity.
# The right-hand side has
# - porepressure fixed at zero via a DirichletBC: physically this removes component=1
# to ensure that porepressure remains fixed
# - a PorousFlowOutflowBC for the component=0 to allow that component to exit the boundary freely
#
# Therefore, the zeroth fluid component will flow from left to right (down the
# pressure gradient).
#
# The important DE is
# porosity * dc/dt = (perm / visc) * grad(P) * grad(c)
# which is true for c = mass-fraction, and very large bulk modulus of the fluid.
# For grad(P) constant in time and space (as in this example) this is just the
# advection equation for c, with velocity = perm / visc / porosity. The parameters
# are chosen to velocity = 1 m/s.
# In the numerical world, and especially with full upwinding, the advection equation
# suffers from diffusion. In this example, the diffusion is obvious when plotting
# the mass-fraction along the line, but the average velocity of the front is still
# correct at 1 m/s.
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
xmin = 0
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[pp]
[]
[frac]
[]
[]
[PorousFlowFullySaturated]
fp = simple_fluid
porepressure = pp
mass_fraction_vars = frac
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = 1-x
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1e10 # need large in order for constant-velocity advection
density0 = 1 # irrelevant
thermal_expansion = 0
viscosity = 11
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.1 0 0 0 1.1 0 0 0 1.1'
[]
[]
[BCs]
[lhs_fixed_b]
type = DirichletBC
boundary = left
variable = pp
value = 1
[]
[rhs_fixed_b]
type = DirichletBC
boundary = right
variable = pp
value = 0
[]
[lhs_fixed_a]
type = DirichletBC
boundary = left
variable = frac
value = 1
[]
[outflow_a]
type = PorousFlowOutflowBC
boundary = right
include_relperm = false # no need for relperm in this fully-saturated simulation
mass_fraction_component = 0
variable = frac
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'asm lu NONZERO 2'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E-2
end_time = 1
nl_rel_tol = 1E-12
nl_abs_tol = 1E-12
[]
[VectorPostprocessors]
[mf]
type = LineValueSampler
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 100
sort_by = x
variable = frac
[]
[]
[Outputs]
[console]
type = Console
execute_on = 'nonlinear linear'
[]
[csv]
type = CSV
sync_times = '0.1 0.5 1'
sync_only = true
[]
time_step_interval = 10
[]
(modules/porous_flow/test/tests/dirackernels/theis3.i)
# Two phase Theis problem: Flow from single source
# Constant rate injection 0.5 kg/s
# 1D cylindrical mesh
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
xmax = 2000
bias_x = 1.05
coord_type = RZ
rz_coord_axis = Y
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[ppwater]
initial_condition = 20e6
[]
[sgas]
initial_condition = 0
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = ppwater
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = sgas
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater sgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 1e5
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
viscosity = 1e-3
thermal_expansion = 0
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 10
viscosity = 1e-4
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = ppwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
compute_enthalpy = false
compute_internal_energy = false
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
compute_enthalpy = false
compute_internal_energy = false
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 1
[]
[]
[BCs]
[rightwater]
type = DirichletBC
boundary = right
value = 20e6
variable = ppwater
[]
[]
[DiracKernels]
[source]
type = PorousFlowSquarePulsePointSource
point = '0 0 0'
mass_flux = 0.5
variable = sgas
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu NONZERO 2 1E-8 1E-10 20'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1e4
[TimeStepper]
type = IterationAdaptiveDT
dt = 10
growth_factor = 2
[]
[]
[VectorPostprocessors]
[line]
type = NodalValueSampler
sort_by = x
variable = 'ppwater sgas'
execute_on = 'timestep_end'
[]
[]
[Postprocessors]
[ppwater]
type = PointValue
point = '4 0 0'
variable = ppwater
[]
[sgas]
type = PointValue
point = '4 0 0'
variable = sgas
[]
[massgas]
type = PorousFlowFluidMass
fluid_component = 1
[]
[]
[Outputs]
file_base = theis3
print_linear_residuals = false
perf_graph = true
[csv]
type = CSV
execute_on = timestep_end
execute_vector_postprocessors_on = final
[]
[]
(modules/porous_flow/test/tests/gravity/fully_saturated_upwinded_nodens_grav01c_action.i)
# Checking that gravity head is established
# 1phase, 2-component, constant fluid-bulk, constant viscosity, constant permeability
# fully saturated with fully-saturated Kernel with upwinding
# For better agreement with the analytical solution (ana_pp), just increase nx
# This is the Action version of fully_saturated_upwinded_grav01c.i but with multiply_by_density=false
# NOTE: this test is numerically delicate because the steady-state configuration is independent of the mass fraction, so the frac variable can assume any value as long as mass-fraction is conserved
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
xmin = -1
xmax = 0
[]
[Variables]
[pp]
[InitialCondition]
type = RandomIC
min = 0
max = 1
[]
[]
[frac]
[InitialCondition]
type = RandomIC
min = 0
max = 1
[]
[]
[]
[PorousFlowFullySaturated]
porepressure = pp
mass_fraction_vars = frac
fp = simple_fluid
gravity = '-1 0 0'
multiply_by_density = false
[]
[Functions]
[ana_pp]
type = ParsedFunction
symbol_names = 'g B p0 rho0'
symbol_values = '1 1.2 0 1'
expression = '-B*log(exp(-p0/B)+g*rho0*x/B)' # expected pp at base
[]
[]
[BCs]
[z]
type = DirichletBC
variable = pp
boundary = right
value = 0
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.2
density0 = 1
viscosity = 1
thermal_expansion = 0
[]
[]
[Materials]
[permeability]
type = PorousFlowPermeabilityConst
PorousFlowDictator = dictator
permeability = '1 0 0 0 2 0 0 0 3'
[]
[]
[Postprocessors]
[pp_base]
type = PointValue
variable = pp
point = '-1 0 0'
[]
[pp_analytical]
type = FunctionValuePostprocessor
function = ana_pp
point = '-1 0 0'
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Steady
solve_type = Newton
nl_rel_tol = 1E-12
petsc_options_iname = '-pc_factor_shift_type'
petsc_options_value = 'NONZERO'
nl_max_its = 100
[]
[Outputs]
csv = true
[]
(modules/porous_flow/test/tests/dispersion/diff01_action.i)
# Test diffusive part of PorousFlowDispersiveFlux kernel by setting dispersion
# coefficients to zero. Pressure is held constant over the mesh, and gravity is
# set to zero so that no advective transport of mass takes place.
# Mass fraction is set to 1 on the left hand side and 0 on the right hand side.
[Mesh]
type = GeneratedMesh
dim = 1
nx = 20
xmax = 10
bias_x = 1.1
[]
[GlobalParams]
PorousFlowDictator = andy_heheheh
[]
[Variables]
[pp]
[]
[massfrac0]
[]
[]
[ICs]
[pp]
type = ConstantIC
variable = pp
value = 1e5
[]
[massfrac0]
type = ConstantIC
variable = massfrac0
value = 0
[]
[]
[BCs]
[left]
type = DirichletBC
value = 1
variable = massfrac0
boundary = left
[]
[right]
type = DirichletBC
value = 0
variable = massfrac0
boundary = right
[]
[pright]
type = DirichletBC
variable = pp
boundary = right
value = 1e5
[]
[pleft]
type = DirichletBC
variable = pp
boundary = left
value = 1e5
[]
[]
[Kernels]
[diff0]
type = PorousFlowDispersiveFlux
fluid_component = 0
variable = massfrac0
disp_trans = 0
disp_long = 0
gravity = '0 0 0'
[]
[diff1]
type = PorousFlowDispersiveFlux
fluid_component = 1
variable = pp
disp_trans = 0
disp_long = 0
gravity = '0 0 0'
[]
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
thermal_expansion = 0.0
bulk_modulus = 1E7
viscosity = 0.001
density0 = 1000.0
[]
[]
[PorousFlowUnsaturated]
porepressure = pp
gravity = '0 0 0'
fp = the_simple_fluid
dictator_name = andy_heheheh
relative_permeability_type = Corey
relative_permeability_exponent = 0.0
mass_fraction_vars = massfrac0
[]
[Materials]
[poro]
type = PorousFlowPorosityConst
porosity = 0.3
[]
[diff]
type = PorousFlowDiffusivityConst
diffusion_coeff = '1 1'
tortuosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-9 0 0 0 1e-9 0 0 0 1e-9'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu NONZERO 2 '
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1
end_time = 20
[]
[VectorPostprocessors]
[xmass]
type = NodalValueSampler
sort_by = id
variable = massfrac0
[]
[]
[Outputs]
[out]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/test/tests/poro_elasticity/mandel_constM.i)
# Mandel's problem of consolodation of a drained medium
#
# A sample is in plane strain.
# -a <= x <= a
# -b <= y <= b
# It is squashed with constant force by impermeable, frictionless plattens on its top and bottom surfaces (at y=+/-b)
# Fluid is allowed to leak out from its sides (at x=+/-a)
# The porepressure within the sample is monitored.
#
# As is common in the literature, this is simulated by
# considering the quarter-sample, 0<=x<=a and 0<=y<=b, with
# impermeable, roller BCs at x=0 and y=0 and y=b.
# Porepressure is fixed at zero on x=a.
# Porepressure and displacement are initialised to zero.
# Then the top (y=b) is moved downwards with prescribed velocity,
# so that the total force that is inducing this downwards velocity
# is fixed. The velocity is worked out by solving Mandel's problem
# analytically, and the total force is monitored in the simulation
# to check that it indeed remains constant.
#
# Here are the problem's parameters, and their values:
# Soil width. a = 1
# Soil height. b = 0.1
# Soil's Lame lambda. la = 0.5
# Soil's Lame mu, which is also the Soil's shear modulus. mu = G = 0.75
# Soil bulk modulus. K = la + 2*mu/3 = 1
# Drained Poisson ratio. nu = (3K - 2G)/(6K + 2G) = 0.2
# Soil bulk compliance. 1/K = 1
# Fluid bulk modulus. Kf = 8
# Fluid bulk compliance. 1/Kf = 0.125
# Soil initial porosity. phi0 = 0.1
# Biot coefficient. alpha = 0.6
# Biot modulus. M = 1/(phi0/Kf + (alpha - phi0)(1 - alpha)/K) = 4.705882
# Undrained bulk modulus. Ku = K + alpha^2*M = 2.694118
# Undrained Poisson ratio. nuu = (3Ku - 2G)/(6Ku + 2G) = 0.372627
# Skempton coefficient. B = alpha*M/Ku = 1.048035
# Fluid mobility (soil permeability/fluid viscosity). k = 1.5
# Consolidation coefficient. c = 2*k*B^2*G*(1-nu)*(1+nuu)^2/9/(1-nuu)/(nuu-nu) = 3.821656
# Normal stress on top. F = 1
#
# The solution for porepressure and displacements is given in
# AHD Cheng and E Detournay "A direct boundary element method for plane strain poroelasticity" International Journal of Numerical and Analytical Methods in Geomechanics 12 (1988) 551-572.
# The solution involves complicated infinite series, so I shall not write it here
[Mesh]
type = GeneratedMesh
dim = 3
nx = 10
ny = 1
nz = 1
xmin = 0
xmax = 1
ymin = 0
ymax = 0.1
zmin = 0
zmax = 1
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
PorousFlowDictator = dictator
block = 0
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure disp_x disp_y disp_z'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.8
alpha = 1e-5
[]
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[porepressure]
[]
[]
[BCs]
[roller_xmin]
type = DirichletBC
variable = disp_x
value = 0
boundary = 'left'
[]
[roller_ymin]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'bottom'
[]
[plane_strain]
type = DirichletBC
variable = disp_z
value = 0
boundary = 'back front'
[]
[xmax_drained]
type = DirichletBC
variable = porepressure
value = 0
boundary = right
[]
[top_velocity]
type = FunctionDirichletBC
variable = disp_y
function = top_velocity
boundary = top
[]
[]
[Functions]
[top_velocity]
type = PiecewiseLinear
x = '0 0.002 0.006 0.014 0.03 0.046 0.062 0.078 0.094 0.11 0.126 0.142 0.158 0.174 0.19 0.206 0.222 0.238 0.254 0.27 0.286 0.302 0.318 0.334 0.35 0.366 0.382 0.398 0.414 0.43 0.446 0.462 0.478 0.494 0.51 0.526 0.542 0.558 0.574 0.59 0.606 0.622 0.638 0.654 0.67 0.686 0.702'
y = '-0.041824842 -0.042730269 -0.043412712 -0.04428867 -0.045509181 -0.04645965 -0.047268246 -0.047974749 -0.048597109 -0.0491467 -0.049632388 -0.050061697 -0.050441198 -0.050776675 -0.051073238 -0.0513354 -0.051567152 -0.051772022 -0.051953128 -0.052113227 -0.052254754 -0.052379865 -0.052490464 -0.052588233 -0.052674662 -0.052751065 -0.052818606 -0.052878312 -0.052931093 -0.052977751 -0.053018997 -0.053055459 -0.053087691 -0.053116185 -0.053141373 -0.05316364 -0.053183324 -0.053200724 -0.053216106 -0.053229704 -0.053241725 -0.053252351 -0.053261745 -0.053270049 -0.053277389 -0.053283879 -0.053289615'
[]
[]
[AuxVariables]
[stress_yy]
order = CONSTANT
family = MONOMIAL
[]
[tot_force]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
[]
[tot_force]
type = ParsedAux
coupled_variables = 'stress_yy porepressure'
execute_on = timestep_end
variable = tot_force
expression = '-stress_yy+0.6*porepressure'
[]
[]
[Kernels]
[grad_stress_x]
type = StressDivergenceTensors
variable = disp_x
component = 0
[]
[grad_stress_y]
type = StressDivergenceTensors
variable = disp_y
component = 1
[]
[grad_stress_z]
type = StressDivergenceTensors
variable = disp_z
component = 2
[]
[poro_x]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.6
variable = disp_x
component = 0
[]
[poro_y]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.6
variable = disp_y
component = 1
[]
[poro_z]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.6
component = 2
variable = disp_z
[]
[poro_vol_exp]
type = PorousFlowMassVolumetricExpansion
variable = porepressure
fluid_component = 0
[]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = porepressure
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = porepressure
gravity = '0 0 0'
fluid_component = 0
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 8
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '0.5 0.75'
# bulk modulus is lambda + 2*mu/3 = 0.5 + 2*0.75/3 = 1
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = porepressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityHMBiotModulus
porosity_zero = 0.1
biot_coefficient = 0.6
solid_bulk = 1
constant_fluid_bulk_modulus = 8
constant_biot_modulus = 4.7058823529
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.5 0 0 0 1.5 0 0 0 1.5'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0 # unimportant in this fully-saturated situation
phase = 0
[]
[]
[Postprocessors]
[p0]
type = PointValue
outputs = csv
point = '0.0 0 0'
variable = porepressure
[]
[p1]
type = PointValue
outputs = csv
point = '0.1 0 0'
variable = porepressure
[]
[p2]
type = PointValue
outputs = csv
point = '0.2 0 0'
variable = porepressure
[]
[p3]
type = PointValue
outputs = csv
point = '0.3 0 0'
variable = porepressure
[]
[p4]
type = PointValue
outputs = csv
point = '0.4 0 0'
variable = porepressure
[]
[p5]
type = PointValue
outputs = csv
point = '0.5 0 0'
variable = porepressure
[]
[p6]
type = PointValue
outputs = csv
point = '0.6 0 0'
variable = porepressure
[]
[p7]
type = PointValue
outputs = csv
point = '0.7 0 0'
variable = porepressure
[]
[p8]
type = PointValue
outputs = csv
point = '0.8 0 0'
variable = porepressure
[]
[p9]
type = PointValue
outputs = csv
point = '0.9 0 0'
variable = porepressure
[]
[p99]
type = PointValue
outputs = csv
point = '1 0 0'
variable = porepressure
[]
[xdisp]
type = PointValue
outputs = csv
point = '1 0.1 0'
variable = disp_x
[]
[ydisp]
type = PointValue
outputs = csv
point = '1 0.1 0'
variable = disp_y
[]
[total_downwards_force]
type = ElementAverageValue
outputs = csv
variable = tot_force
[]
[dt]
type = FunctionValuePostprocessor
outputs = console
function = if(0.15*t<0.01,0.15*t,0.01)
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu 1E-14 1E-10 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
start_time = 0
end_time = 0.7
[TimeStepper]
type = PostprocessorDT
postprocessor = dt
dt = 0.001
[]
[]
[Outputs]
execute_on = 'timestep_end'
file_base = mandel_constM
[csv]
time_step_interval = 3
type = CSV
[]
[]
(modules/porous_flow/test/tests/jacobian/fflux10.i)
# 1phase, 3components, constant viscosity, constant insitu permeability
# density with constant bulk, BW relative perm, nonzero gravity, unsaturated with BW
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[massfrac0]
[]
[massfrac1]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = -0.7+x+y
[]
[massfrac0]
type = RandomIC
variable = massfrac0
min = 0
max = 0.3
[]
[massfrac1]
type = RandomIC
variable = massfrac1
min = 0
max = 0.4
[]
[]
[Kernels]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
gravity = '-1 -0.1 0'
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = massfrac0
gravity = '-1 -0.1 0'
[]
[flux2]
type = PorousFlowAdvectiveFlux
fluid_component = 2
variable = massfrac1
gravity = '-1 -0.1 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp massfrac0 massfrac1'
number_fluid_phases = 1
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureBW
Sn = 0.05
Ss = 0.9
las = 2.2
C = 1.5
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac0 massfrac1'
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = PorousFlowRelativePermeabilityBW
Sn = 0.05
Ss = 0.9
Kn = 0.02
Ks = 0.95
C = 1.5
phase = 0
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/multi_system/flow_and_mecha.i)
PorousFlowDictatorName = 'dictator'
[GlobalParams]
time_unit = days
displacements = 'disp_x disp_y disp_z'
use_displaced_mesh = false
[]
[Problem]
kernel_coverage_check = false
material_coverage_check = false
nl_sys_names = 'porous_flow solid_mech'
[]
[Mesh]
[BaseMesh]
type = GeneratedMeshGenerator
subdomain_name = 'BaseMesh'
elem_type = "TET10"
dim = 3
nx = 6
ny = 6
nz = 2
xmin = -10
xmax = +10
ymin = -10
ymax = +10
zmin = -2
zmax = +2
[]
[]
[Physics]
[SolidMechanics]
[QuasiStatic]
[all]
strain = SMALL
incremental = true
[]
[]
[]
[]
[PorousFlowFullySaturated]
coupling_type = HydroMechanical
porepressure = porepressure
biot_coefficient = 1
fp = simple_fluid
stabilization = FULL
gravity = '0 0 0'
add_darcy_aux = false
dictator_name = ${PorousFlowDictatorName}
[]
[Variables]
[disp_x]
solver_sys = 'solid_mech'
[]
[disp_y]
solver_sys = 'solid_mech'
[]
[disp_z]
solver_sys = 'solid_mech'
[]
[porepressure]
family = LAGRANGE
order = SECOND
solver_sys = 'porous_flow'
[]
[]
[BCs]
[fix_x]
type = DirichletBC
variable = disp_x
boundary = 'left right front'
value = 0.0
[]
[fix_y]
type = DirichletBC
variable = disp_y
boundary = 'bottom top'
value = 0.0
[]
[fix_z]
type = DirichletBC
variable = disp_z
boundary = 'back'
value = 0.0
[]
[porepressure_fix_left]
type = DirichletBC
variable = porepressure
boundary = 'left top bottom'
value = 2
[]
[porepressure_fix_right]
type = DirichletBC
variable = porepressure
boundary = 'right'
value = 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2E5
density0 = 1000
thermal_expansion = 1e-4
viscosity = 9.0E-4
[]
[]
[Materials]
[porosity_bulk]
type = PorousFlowPorosityConst
porosity = 0.3
PorousFlowDictator = ${PorousFlowDictatorName}
[]
[undrained_density_0]
type = GenericConstantMaterial
prop_names = density
prop_values = 2500
[]
[permeability_bulk]
type = PorousFlowPermeabilityConst
permeability = '1e-5 0 0 0 1e-5 0 0 0 1e-5'
PorousFlowDictator = ${PorousFlowDictatorName}
[]
[elasticity_tensor]
type = ComputeIsotropicElasticityTensor
youngs_modulus = 2e5
poissons_ratio = 0.15
[]
[finite_strain_stress]
type = ComputeFiniteStrainElasticStress
[]
[]
[Preconditioning]
[SMP_porous]
type = SMP
full = true
nl_sys = 'porous_flow'
[]
[SMP_mecha]
type = SMP
full = true
nl_sys = 'solid_mech'
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
# best overall
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu mumps'
line_search = none
nl_abs_tol = 5e-8
nl_rel_tol = 1e-8
l_max_its = 20
nl_max_its = 12
start_time = 0.0
end_time = 1
[TimeSteppers]
[ConstantDT1]
type = ConstantDT
dt = 0.25
[]
[]
[]
[Postprocessors]
[p000]
type = PointValue
variable = porepressure
point = '0 0 0'
execute_on = 'initial timestep_end'
[]
[p550]
type = PointValue
variable = porepressure
point = '5 5 0'
execute_on = 'initial timestep_end'
[]
[p-551]
type = PointValue
variable = porepressure
point = '-5 -5 -1'
execute_on = 'initial timestep_end'
[]
[x000]
type = PointValue
variable = disp_x
point = '0 0 0'
execute_on = 'initial timestep_end'
[]
[x550]
type = PointValue
variable = disp_x
point = '5 5 0'
execute_on = 'initial timestep_end'
[]
[x-551]
type = PointValue
variable = disp_x
point = '-5 -5 -1'
execute_on = 'initial timestep_end'
[]
[z000]
type = PointValue
variable = disp_z
point = '0 0 0'
execute_on = 'initial timestep_end'
[]
[z550]
type = PointValue
variable = disp_z
point = '5 5 0'
execute_on = 'initial timestep_end'
[]
[z-551]
type = PointValue
variable = disp_z
point = '-5 -5 -1'
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
csv = true
[]
(modules/porous_flow/test/tests/chemistry/2species_equilibrium_2phase.i)
# Using a two-phase system (see 2species_equilibrium for the single-phase)
# The saturations, porosity, mass fractions, tortuosity and diffusion coefficients are chosen so that the results are identical to 2species_equilibrium
#
# PorousFlow analogy of chemical_reactions/test/tests/aqueous_equilibrium/2species.i
#
# Simple equilibrium reaction example to illustrate the use of PorousFlowMassFractionAqueousEquilibriumChemistry
#
# In this example, two primary species a and b are transported by diffusion and convection
# from the left of the porous medium, reacting to form two equilibrium species pa2 and pab
# according to the equilibrium reaction:
#
# reactions = '2a = pa2 rate = 10^2
# a + b = pab rate = 10^-2'
#
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
[]
[Variables]
[a]
order = FIRST
family = LAGRANGE
[InitialCondition]
type = BoundingBoxIC
x1 = 0.0
y1 = 0.0
x2 = 1.0e-10
y2 = 1
inside = 1.0e-2
outside = 1.0e-10
[]
[]
[b]
order = FIRST
family = LAGRANGE
[InitialCondition]
type = BoundingBoxIC
x1 = 0.0
y1 = 0.0
x2 = 1.0e-10
y2 = 1
inside = 1.0e-2
outside = 1.0e-10
[]
[]
[]
[AuxVariables]
[eqm_k0]
initial_condition = 1E2
[]
[eqm_k1]
initial_condition = 1E-2
[]
[pressure0]
[]
[saturation1]
initial_condition = 0.25
[]
[a_in_phase0]
initial_condition = 0.0
[]
[b_in_phase0]
initial_condition = 0.0
[]
[pa2]
family = MONOMIAL
order = CONSTANT
[]
[pab]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[pa2]
type = PorousFlowPropertyAux
property = secondary_concentration
secondary_species = 0
variable = pa2
[]
[pab]
type = PorousFlowPropertyAux
property = secondary_concentration
secondary_species = 1
variable = pab
[]
[]
[ICs]
[pressure0]
type = FunctionIC
variable = pressure0
function = 2-x
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Kernels]
[mass_a]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = a
[]
[flux_a]
type = PorousFlowAdvectiveFlux
variable = a
fluid_component = 0
[]
[diff_a]
type = PorousFlowDispersiveFlux
variable = a
fluid_component = 0
disp_trans = '0 0'
disp_long = '0 0'
[]
[mass_b]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = b
[]
[flux_b]
type = PorousFlowAdvectiveFlux
variable = b
fluid_component = 1
[]
[diff_b]
type = PorousFlowDispersiveFlux
variable = b
fluid_component = 1
disp_trans = '0 0'
disp_long = '0 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'a b'
number_fluid_phases = 2
number_fluid_components = 3
number_aqueous_equilibrium = 2
aqueous_phase_number = 1
[]
[pc]
type = PorousFlowCapillaryPressureConst
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9 # huge, so mimic chemical_reactions
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
capillary_pressure = pc
phase0_porepressure = pressure0
phase1_saturation = saturation1
[]
[massfrac]
type = PorousFlowMassFractionAqueousEquilibriumChemistry
mass_fraction_vars = 'a_in_phase0 b_in_phase0 a b'
num_reactions = 2
equilibrium_constants = 'eqm_k0 eqm_k1'
primary_activity_coefficients = '1 1'
secondary_activity_coefficients = '1 1'
reactions = '2 0
1 1'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.8
[]
[permeability]
type = PorousFlowPermeabilityConst
# porous_flow permeability / porous_flow viscosity = chemical_reactions conductivity = 1E-4
permeability = '1E-7 0 0 0 1E-7 0 0 0 1E-7'
[]
[relp0]
type = PorousFlowRelativePermeabilityConst
phase = 0
[]
[relp1]
type = PorousFlowRelativePermeabilityConst
phase = 1
[]
[diff]
type = PorousFlowDiffusivityConst
# porous_flow diffusion_coeff * tortuousity * porosity = chemical_reactions diffusivity = 1E-4
diffusion_coeff = '5E-4 5E-4 5E-4
5E-4 5E-4 5E-4'
tortuosity = '0.25 0.25'
[]
[]
[BCs]
[a_left]
type = DirichletBC
variable = a
boundary = left
value = 1.0e-2
[]
[b_left]
type = DirichletBC
variable = b
boundary = left
value = 1.0e-2
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 10
end_time = 100
[]
[Outputs]
print_linear_residuals = true
exodus = true
perf_graph = true
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_adaptivity.i)
# Pressure pulse in 1D with 1 phase - transient simulation with a constant
# PorousFlowPorosity and mesh adaptivity with an indicator
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 100
[]
[Adaptivity]
marker = marker
[Markers]
[marker]
type = ErrorFractionMarker
indicator = front
refine = 0.5
coarsen = 0.2
[]
[]
[Indicators]
[front]
type = GradientJumpIndicator
variable = pp
[]
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 2E6
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = pp
gravity = '0 0 0'
fluid_component = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-15'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0
phase = 0
[]
[]
[BCs]
[left]
type = DirichletBC
boundary = left
preset = false
value = 3E6
variable = pp
[]
[right]
type = PorousFlowPiecewiseLinearSink
variable = pp
boundary = right
fluid_phase = 0
pt_vals = '0 1E9'
multipliers = '0 1E9'
mass_fraction_component = 0
use_mobility = true
flux_function = 1E-6
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1e3
end_time = 5e3
[]
[Postprocessors]
[p000]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = 'initial timestep_end'
[]
[p010]
type = PointValue
variable = pp
point = '10 0 0'
execute_on = 'initial timestep_end'
[]
[p020]
type = PointValue
variable = pp
point = '20 0 0'
execute_on = 'initial timestep_end'
[]
[p030]
type = PointValue
variable = pp
point = '30 0 0'
execute_on = 'initial timestep_end'
[]
[p040]
type = PointValue
variable = pp
point = '40 0 0'
execute_on = 'initial timestep_end'
[]
[p050]
type = PointValue
variable = pp
point = '50 0 0'
execute_on = 'initial timestep_end'
[]
[p060]
type = PointValue
variable = pp
point = '60 0 0'
execute_on = 'initial timestep_end'
[]
[p070]
type = PointValue
variable = pp
point = '70 0 0'
execute_on = 'initial timestep_end'
[]
[p080]
type = PointValue
variable = pp
point = '80 0 0'
execute_on = 'initial timestep_end'
[]
[p090]
type = PointValue
variable = pp
point = '90 0 0'
execute_on = 'initial timestep_end'
[]
[p100]
type = PointValue
variable = pp
point = '100 0 0'
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
print_linear_residuals = false
csv = true
[]
(modules/porous_flow/test/tests/gravity/grav02g.i)
# Checking that gravity head is established in the transient situation when 0<=saturation<=1 (note the less-than-or-equal-to).
# 2phase (PS), 2components, Brooks-Corey capillary pressure, constant fluid bulk-moduli for each phase, constant viscosity,
# constant permeability, Brooks-Corey relative permeabilities with residual saturation
[Mesh]
type = GeneratedMesh
dim = 2
ny = 10
ymax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 -10 0'
[]
[Variables]
[ppwater]
initial_condition = 1.5e6
[]
[sgas]
initial_condition = 0.3
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[ppgas]
family = MONOMIAL
order = CONSTANT
[]
[swater]
family = MONOMIAL
order = CONSTANT
[]
[relpermwater]
family = MONOMIAL
order = CONSTANT
[]
[relpermgas]
family = MONOMIAL
order = CONSTANT
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = ppwater
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = sgas
[]
[]
[AuxKernels]
[ppgas]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = ppgas
[]
[swater]
type = PorousFlowPropertyAux
property = saturation
phase = 0
variable = swater
[]
[relpermwater]
type = MaterialStdVectorAux
property = PorousFlow_relative_permeability_qp
index = 0
variable = relpermwater
[]
[relpermgas]
type = PorousFlowPropertyAux
property = relperm
phase = 1
variable = relpermgas
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater sgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureBC
lambda = 2
pe = 1e4
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
viscosity = 1e-3
thermal_expansion = 0
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 10
viscosity = 1e-5
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = ppwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-11 0 0 0 1e-11 0 0 0 1e-11'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityBC
lambda = 2
phase = 0
s_res = 0.25
sum_s_res = 0.35
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityBC
lambda = 2
phase = 1
s_res = 0.1
sum_s_res = 0.35
nw_phase = true
[]
[]
[Postprocessors]
[mass_ph0]
type = PorousFlowFluidMass
fluid_component = 0
execute_on = 'initial timestep_end'
[]
[mass_ph1]
type = PorousFlowFluidMass
fluid_component = 1
execute_on = 'initial timestep_end'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_stol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-13 15'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1e5
[TimeStepper]
type = IterationAdaptiveDT
dt = 5e3
[]
[]
[Outputs]
execute_on = 'initial timestep_end'
file_base = grav02g
exodus = true
perf_graph = true
csv = false
[]
(modules/porous_flow/test/tests/jacobian/outflowbc03.i)
# PorousFlowOutflowBC: testing Jacobian for single-phase, multi-component, with heat
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 3
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '1 2 3'
[]
[Variables]
[pp]
initial_condition = -1
[]
[frac]
initial_condition = 0.4
[]
[T]
[]
[]
[PorousFlowUnsaturated]
coupling_type = ThermoHydro
add_darcy_aux = false
fp = simple_fluid
mass_fraction_vars = frac
porepressure = pp
temperature = T
van_genuchten_alpha = 1
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1.2
cp = 0.9
cv = 1.1
viscosity = 0.4
thermal_expansion = 0.7
[]
[]
[BCs]
[outflow0]
type = PorousFlowOutflowBC
boundary = 'front back top bottom'
variable = frac
mass_fraction_component = 0
multiplier = 1E8 # so this BC gets weighted much more heavily than Kernels
[]
[outflow1]
type = PorousFlowOutflowBC
boundary = 'left right top bottom'
variable = pp
mass_fraction_component = 1
multiplier = 1E8 # so this BC gets weighted much more heavily than Kernels
[]
[outflowT]
type = PorousFlowOutflowBC
boundary = 'left right top bottom'
flux_type = heat
variable = T
multiplier = 1E8 # so this BC gets weighted much more heavily than Kernels
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.4
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0.1 0.2 0.3 1.8 0.9 1.7 0.4 0.3 1.1'
[]
[matrix_energy]
type = PorousFlowMatrixInternalEnergy
density = 0.5
specific_heat_capacity = 2.2E-3
[]
[thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '1.1 1.2 1.3 0.8 0.9 0.7 0.4 0.3 0.1'
wet_thermal_conductivity = '0.1 0.2 0.3 1.8 1.9 1.7 1.4 1.3 1.1'
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1E-7
num_steps = 1
# petsc_options = '-snes_test_jacobian -snes_force_iteration'
# petsc_options_iname = '-snes_type --ksp_type -pc_type -snes_convergence_test'
# petsc_options_value = ' ksponly preonly none skip'
[]
(modules/porous_flow/test/tests/dirackernels/bh_except01.i)
# PorousFlowPeacemanBorehole exception test
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = TimeDerivative
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
bottom_p_or_t = 0
fluid_phase = 1
point_file = bh02.bh
SumQuantityUO = borehole_total_outflow_mass
variable = pp
unit_weight = '0 0 0'
character = 1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
expression = abs((a-c+d)/2/(a+c))
symbol_names = 'a c d'
symbol_values = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
(modules/porous_flow/test/tests/jacobian/basic_advection1.i)
# Basic advection with no PorousFlow variables
[Mesh]
type = GeneratedMesh
dim = 1
nx = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[u]
[]
[]
[AuxVariables]
[P]
[]
[]
[ICs]
[P]
type = FunctionIC
variable = P
function = '2*(1-x)'
[]
[u]
type = RandomIC
variable = u
[]
[]
[Kernels]
[u_advection]
type = PorousFlowBasicAdvection
variable = u
phase = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = ''
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureConst
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 4
thermal_expansion = 0
viscosity = 150.0
[]
[]
[Materials]
[temperature_qp]
type = PorousFlowTemperature
[]
[ppss_qp]
type = PorousFlow1PhaseP
porepressure = P
capillary_pressure = pc
[]
[simple_fluid_qp]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '5 0 0 0 5 0 0 0 5'
[]
[relperm_qp]
type = PorousFlowRelativePermeabilityCorey
n = 0
phase = 0
[]
[darcy_velocity_qp]
type = PorousFlowDarcyVelocityMaterial
gravity = '0.25 0 0'
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
#petsc_options = '-snes_test_display'
petsc_options_iname = '-snes_type'
petsc_options_value = ' test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1
[]
(modules/porous_flow/test/tests/fluidstate/water_vapor_phasechange.i)
# Tests correct calculation of properties in PorousFlowWaterVapor as a phase change
# from liquid to a two-phase model occurs due to a pressure drop.
# A single 10 m^3 element is used, with constant mass and heat production using
# a Dirac kernel. Initial conditions correspond to just outside the two-phase region in
# the liquid state.
#
# An identical problem can be run using TOUGH2, with the following outputs after 1,000s
# Pressure: 8.58 Mpa
# Temperature: 299.92 K
# Vapor saturation: 0.00637
[Mesh]
type = GeneratedMesh
dim = 3
xmax = 10
ymax = 10
zmax = 10
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pliq]
initial_condition = 9e6
[]
[h]
scaling = 1e-3
[]
[]
[ICs]
[hic]
type = PorousFlowFluidPropertyIC
variable = h
porepressure = pliq
property = enthalpy
temperature = 300
temperature_unit = Celsius
fp = water
[]
[]
[DiracKernels]
[mass]
type = ConstantPointSource
point = '5 5 5'
variable = pliq
value = -1
[]
[heat]
type = ConstantPointSource
point = '5 5 5'
variable = h
value = -1.344269e6
[]
[]
[AuxVariables]
[pressure_gas]
order = CONSTANT
family = MONOMIAL
[]
[pressure_water]
order = CONSTANT
family = MONOMIAL
[]
[enthalpy_gas]
order = CONSTANT
family = MONOMIAL
[]
[enthalpy_water]
order = CONSTANT
family = MONOMIAL
[]
[saturation_gas]
order = CONSTANT
family = MONOMIAL
[]
[saturation_water]
order = CONSTANT
family = MONOMIAL
[]
[density_water]
order = CONSTANT
family = MONOMIAL
[]
[density_gas]
order = CONSTANT
family = MONOMIAL
[]
[viscosity_water]
order = CONSTANT
family = MONOMIAL
[]
[viscosity_gas]
order = CONSTANT
family = MONOMIAL
[]
[temperature]
order = CONSTANT
family = MONOMIAL
[]
[e_gas]
order = CONSTANT
family = MONOMIAL
[]
[e_water]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[enthalpy_water]
type = PorousFlowPropertyAux
variable = enthalpy_water
property = enthalpy
phase = 0
execute_on = 'initial timestep_end'
[]
[enthalpy_gas]
type = PorousFlowPropertyAux
variable = enthalpy_gas
property = enthalpy
phase = 1
execute_on = 'initial timestep_end'
[]
[pressure_water]
type = PorousFlowPropertyAux
variable = pressure_water
property = pressure
phase = 0
execute_on = 'initial timestep_end'
[]
[pressure_gas]
type = PorousFlowPropertyAux
variable = pressure_gas
property = pressure
phase = 1
execute_on = 'initial timestep_end'
[]
[saturation_water]
type = PorousFlowPropertyAux
variable = saturation_water
property = saturation
phase = 0
execute_on = 'initial timestep_end'
[]
[saturation_gas]
type = PorousFlowPropertyAux
variable = saturation_gas
property = saturation
phase = 1
execute_on = 'initial timestep_end'
[]
[density_water]
type = PorousFlowPropertyAux
variable = density_water
property = density
phase = 0
execute_on = 'initial timestep_end'
[]
[density_gas]
type = PorousFlowPropertyAux
variable = density_gas
property = density
phase = 1
execute_on = 'initial timestep_end'
[]
[viscosity_water]
type = PorousFlowPropertyAux
variable = viscosity_water
property = viscosity
phase = 0
execute_on = 'initial timestep_end'
[]
[viscosity_gas]
type = PorousFlowPropertyAux
variable = viscosity_gas
property = viscosity
phase = 1
execute_on = 'initial timestep_end'
[]
[temperature]
type = PorousFlowPropertyAux
variable = temperature
property = temperature
execute_on = 'initial timestep_end'
[]
[e_water]
type = PorousFlowPropertyAux
variable = e_water
property = internal_energy
phase = 0
execute_on = 'initial timestep_end'
[]
[egas]
type = PorousFlowPropertyAux
variable = e_gas
property = internal_energy
phase = 1
execute_on = 'initial timestep_end'
[]
[]
[Kernels]
[mass]
type = PorousFlowMassTimeDerivative
variable = pliq
[]
[heat]
type = PorousFlowEnergyTimeDerivative
variable = h
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pliq h'
number_fluid_phases = 2
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureBC
pe = 1e5
lambda = 2
pc_max = 1e6
[]
[fs]
type = PorousFlowWaterVapor
water_fp = water
capillary_pressure = pc
[]
[]
[FluidProperties]
[water]
type = Water97FluidProperties
[]
[]
[Materials]
[watervapor]
type = PorousFlowFluidStateSingleComponent
porepressure = pliq
enthalpy = h
temperature_unit = Celsius
capillary_pressure = pc
fluid_state = fs
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-14 0 0 0 1e-14 0 0 0 1e-14'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[internal_energy]
type = PorousFlowMatrixInternalEnergy
density = 2650
specific_heat_capacity = 1000
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
end_time = 1e3
nl_abs_tol = 1e-12
[TimeStepper]
type = IterationAdaptiveDT
dt = 10
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
[density_water]
type = ElementAverageValue
variable = density_water
execute_on = 'initial timestep_end'
[]
[density_gas]
type = ElementAverageValue
variable = density_gas
execute_on = 'initial timestep_end'
[]
[viscosity_water]
type = ElementAverageValue
variable = viscosity_water
execute_on = 'initial timestep_end'
[]
[viscosity_gas]
type = ElementAverageValue
variable = viscosity_gas
execute_on = 'initial timestep_end'
[]
[enthalpy_water]
type = ElementAverageValue
variable = enthalpy_water
execute_on = 'initial timestep_end'
[]
[enthalpy_gas]
type = ElementAverageValue
variable = enthalpy_gas
execute_on = 'initial timestep_end'
[]
[sg]
type = ElementAverageValue
variable = saturation_gas
execute_on = 'initial timestep_end'
[]
[sw]
type = ElementAverageValue
variable = saturation_water
execute_on = 'initial timestep_end'
[]
[pwater]
type = ElementAverageValue
variable = pressure_water
execute_on = 'initial timestep_end'
[]
[pgas]
type = ElementAverageValue
variable = pressure_gas
execute_on = 'initial timestep_end'
[]
[temperature]
type = ElementAverageValue
variable = temperature
execute_on = 'initial timestep_end'
[]
[enthalpy]
type = ElementAverageValue
variable = h
execute_on = 'initial timestep_end'
[]
[pliq]
type = ElementAverageValue
variable = pliq
execute_on = 'initial timestep_end'
[]
[liquid_mass]
type = PorousFlowFluidMass
phase = 0
execute_on = 'initial timestep_end'
[]
[vapor_mass]
type = PorousFlowFluidMass
phase = 1
execute_on = 'initial timestep_end'
[]
[liquid_heat]
type = PorousFlowHeatEnergy
phase = 0
execute_on = 'initial timestep_end'
[]
[vapor_heat]
type = PorousFlowHeatEnergy
phase = 1
execute_on = 'initial timestep_end'
[]
[e_water]
type = ElementAverageValue
variable = e_water
execute_on = 'initial timestep_end'
[]
[e_gas]
type = ElementAverageValue
variable = e_gas
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
csv = true
perf_graph = false
[]
(modules/porous_flow/test/tests/energy_conservation/heat04_action_KT.i)
# heat04, but using an action with KT stabilization.
# See heat04.i for a full discussion of the results.
# The KT stabilization should have no impact as there is no flow, but this input file checks that MOOSE runs.
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -0.5
xmax = 0.5
ymin = -0.5
ymax = 0.5
zmin = -0.5
zmax = 0.5
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
thermal_expansion = 0.5
cv = 2
cp = 2
bulk_modulus = 2.0
density0 = 3.0
[]
[]
[PorousFlowUnsaturated]
coupling_type = ThermoHydroMechanical
displacements = 'disp_x disp_y disp_z'
porepressure = pp
temperature = temp
dictator_name = Sir
biot_coefficient = 1.0
gravity = '0 0 0'
fp = the_simple_fluid
van_genuchten_alpha = 1.0E-12
van_genuchten_m = 0.5
relative_permeability_type = Corey
relative_permeability_exponent = 0.0
stabilization = KT
flux_limiter_type = superbee
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
PorousFlowDictator = Sir
block = 0
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[pp]
[]
[temp]
[]
[]
[BCs]
[confinex]
type = DirichletBC
variable = disp_x
value = 0
boundary = 'left right'
[]
[confiney]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'bottom top'
[]
[confinez]
type = DirichletBC
variable = disp_z
value = 0
boundary = 'back front'
[]
[]
[Kernels]
[heat_source]
type = BodyForce
function = 1
variable = temp
[]
[]
[Functions]
[err_T_fcn]
type = ParsedFunction
symbol_names = 'por0 rte temp rd rhc m0 fhc source'
symbol_values = '0.5 0.25 t0 5 0.2 1.5 2 1'
expression = '((1-por0)*exp(rte*temp)*rd*rhc*temp+m0*fhc*temp-source*t)/(source*t)'
[]
[err_pp_fcn]
type = ParsedFunction
symbol_names = 'por0 rte temp rd rhc m0 fhc source bulk pp fte'
symbol_values = '0.5 0.25 t0 5 0.2 1.5 2 1 2 p0 0.5'
expression = '(bulk*(fte*temp-log(1+(por0-1)*exp(rte*temp))+log(por0))-pp)/pp'
[]
[]
[AuxVariables]
[porosity]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[porosity]
type = PorousFlowPropertyAux
property = porosity
variable = porosity
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '1 1.5'
# bulk modulus is lambda + 2*mu/3 = 1 + 2*1.5/3 = 2
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[porosity]
type = PorousFlowPorosity
thermal = true
fluid = true
mechanical = true
ensure_positive = false
biot_coefficient = 1.0
porosity_zero = 0.5
thermal_expansion_coeff = 0.25
solid_bulk = 2
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 0.2
density = 5.0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0 0 0 0 0 0 0 0 0'
[]
[thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '0 0 0 0 0 0 0 0 0'
[]
[]
[Postprocessors]
[p0]
type = PointValue
outputs = 'console csv'
execute_on = 'timestep_end'
point = '0 0 0'
variable = pp
[]
[t0]
type = PointValue
outputs = 'console csv'
execute_on = 'timestep_end'
point = '0 0 0'
variable = temp
[]
[porosity]
type = PointValue
outputs = 'console csv'
execute_on = 'timestep_end'
point = '0 0 0'
variable = porosity
[]
[stress_xx]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_xx
[]
[stress_yy]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_yy
[]
[stress_zz]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_zz
[]
[fluid_mass]
type = PorousFlowFluidMass
fluid_component = 0
execute_on = 'timestep_end'
outputs = 'console csv'
[]
[total_heat]
type = PorousFlowHeatEnergy
phase = 0
execute_on = 'timestep_end'
outputs = 'console csv'
[]
[err_T]
type = FunctionValuePostprocessor
function = err_T_fcn
[]
[err_P]
type = FunctionValuePostprocessor
function = err_pp_fcn
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-12 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 5
[]
[Outputs]
execute_on = 'initial timestep_end'
file_base = heat04_action
csv = true
[]
(modules/porous_flow/test/tests/aux_kernels/darcy_velocity_lower_2D.i)
# checking that the PorousFlowDarcyVelocityComponentLowerDimensional AuxKernel works as expected in 1D+2D situation
# for the fully-saturated case (relative-permeability = 1)
# The 1_frac_in_2D_example.e has size 0.3x0.2x0, and a fracture running through its
# centre, with normal = (0, 1, 0)
# Porepressure is initialised to grad(P) = (1, 2, 0)
# Fluid_density = 2
# viscosity = 10
# relative_permeability = 1
# permeability = (5, 5, 5) (in the bulk, measured in m^2)
# permeability = (10, 10, 10) (in the fracture, measured in m^3)
# aperture = 0.01
# gravity = (1, 0.5, 0)
# So Darcy velocity in the bulk = (0.5, -0.5, 0)
# in the fracture grad(P) = (1, 0, 0)
# In the fracture the projected gravity vector is
# tangential_gravity = (1, 0, 0)
# So the Darcy velocity in the fracture = (100, 0, 0)
[Mesh]
type = FileMesh
file = 1_frac_in_2D_example.e
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '1 0.5 0'
[]
[Variables]
[pp]
[]
[]
[ICs]
[pinit]
type = FunctionIC
function = 'x+2*y'
variable = pp
[]
[]
[Kernels]
[dummy]
type = TimeDerivative
variable = pp
[]
[]
[AuxVariables]
[bulk_vel_x]
order = CONSTANT
family = MONOMIAL
block = '2 3'
[]
[bulk_vel_y]
order = CONSTANT
family = MONOMIAL
block = '2 3'
[]
[bulk_vel_z]
order = CONSTANT
family = MONOMIAL
block = '2 3'
[]
[fracture_vel_x]
order = CONSTANT
family = MONOMIAL
block = 1
[]
[fracture_vel_y]
order = CONSTANT
family = MONOMIAL
block = 1
[]
[fracture_vel_z]
order = CONSTANT
family = MONOMIAL
block = 1
[]
[]
[AuxKernels]
[bulk_vel_x]
type = PorousFlowDarcyVelocityComponent
variable = bulk_vel_x
component = x
fluid_phase = 0
[]
[bulk_vel_y]
type = PorousFlowDarcyVelocityComponent
variable = bulk_vel_y
component = y
fluid_phase = 0
[]
[bulk_vel_z]
type = PorousFlowDarcyVelocityComponent
variable = bulk_vel_z
component = z
fluid_phase = 0
[]
[fracture_vel_x]
type = PorousFlowDarcyVelocityComponentLowerDimensional
variable = fracture_vel_x
component = x
fluid_phase = 0
aperture = 0.01
[]
[fracture_vel_y]
type = PorousFlowDarcyVelocityComponentLowerDimensional
variable = fracture_vel_y
component = y
fluid_phase = 0
aperture = 0.01
[]
[fracture_vel_z]
type = PorousFlowDarcyVelocityComponentLowerDimensional
variable = fracture_vel_z
component = z
fluid_phase = 0
aperture = 0.01
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1E16
viscosity = 10
density0 = 2
thermal_expansion = 0
[]
[]
[Postprocessors]
[bulk_vel_x]
type = PointValue
variable = bulk_vel_x
point = '0 -0.05 0'
[]
[bulk_vel_y]
type = PointValue
variable = bulk_vel_y
point = '0 -0.05 0'
[]
[bulk_vel_z]
type = PointValue
variable = bulk_vel_z
point = '0 -0.05 0'
[]
[fracture_vel_x]
type = PointValue
point = '0 0 0'
variable = fracture_vel_x
[]
[fracture_vel_y]
type = PointValue
point = '0 0 0'
variable = fracture_vel_y
[]
[fracture_vel_z]
type = PointValue
point = '0 0 0'
variable = fracture_vel_z
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '5 0 0 0 5 0 0 0 5'
block = '2 3'
[]
[permeability_fracture]
type = PorousFlowPermeabilityConst
permeability = '10 0 0 0 10 0 0 0 10'
block = 1
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[Executioner]
type = Transient
dt = 1
end_time = 1
[]
[Outputs]
csv = true
[]
(modules/porous_flow/test/tests/basic_advection/except1.i)
# phase number is too high in PorousFlowBasicAdvection
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
xmin = 0
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[u]
[]
[]
[AuxVariables]
[P]
[]
[]
[ICs]
[P]
type = FunctionIC
variable = P
function = '2*(1-x)'
[]
[u]
type = FunctionIC
variable = u
function = 'if(x<0.1,1,0)'
[]
[]
[Kernels]
[u_dot]
type = TimeDerivative
variable = u
[]
[u_advection]
type = PorousFlowBasicAdvection
variable = u
phase = 1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = ''
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureConst
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 4
thermal_expansion = 0
viscosity = 150.0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = P
capillary_pressure = pc
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '5 0 0 0 5 0 0 0 5'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0
phase = 0
[]
[darcy_velocity]
type = PorousFlowDarcyVelocityMaterial
gravity = '0.25 0 0'
[]
[]
[BCs]
[left]
type = DirichletBC
boundary = left
value = 1
variable = u
[]
[right]
type = DirichletBC
boundary = right
value = 0
variable = u
[]
[]
[Preconditioning]
[basic]
type = SMP
full = true
petsc_options_iname = '-pc_type -snes_rtol'
petsc_options_value = ' lu 1E-10'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 5
[]
[Outputs]
exodus = true
print_linear_residuals = false
[]
(modules/porous_flow/examples/tutorial/06.i)
# Darcy flow with a tracer
[Mesh]
[annular]
type = AnnularMeshGenerator
nr = 10
rmin = 1.0
rmax = 10
growth_r = 1.4
nt = 4
dmin = 0
dmax = 90
[]
[make3D]
type = MeshExtruderGenerator
extrusion_vector = '0 0 12'
num_layers = 3
bottom_sideset = 'bottom'
top_sideset = 'top'
input = annular
[]
[shift_down]
type = TransformGenerator
transform = TRANSLATE
vector_value = '0 0 -6'
input = make3D
[]
[aquifer]
type = SubdomainBoundingBoxGenerator
block_id = 1
bottom_left = '0 0 -2'
top_right = '10 10 2'
input = shift_down
[]
[injection_area]
type = ParsedGenerateSideset
combinatorial_geometry = 'x*x+y*y<1.01'
included_subdomains = 1
new_sideset_name = 'injection_area'
input = 'aquifer'
[]
[rename]
type = RenameBlockGenerator
old_block = '0 1'
new_block = 'caps aquifer'
input = 'injection_area'
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[porepressure]
[]
[tracer_concentration]
[]
[]
[ICs]
[tracer_concentration]
type = FunctionIC
function = '0.5*if(x*x+y*y<1.01,1,0)'
variable = tracer_concentration
[]
[]
[PorousFlowFullySaturated]
porepressure = porepressure
coupling_type = Hydro
gravity = '0 0 0'
fp = the_simple_fluid
mass_fraction_vars = tracer_concentration
stabilization = none # Note to reader: 06_KT.i uses KT stabilization - compare the results
[]
[BCs]
[constant_injection_porepressure]
type = DirichletBC
variable = porepressure
value = 1E6
boundary = injection_area
[]
[constant_outer_porepressure]
type = DirichletBC
variable = porepressure
value = 0
boundary = rmax
[]
[injected_tracer]
type = DirichletBC
variable = tracer_concentration
value = 0.5
boundary = injection_area
[]
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2E9
viscosity = 1.0E-3
density0 = 1000.0
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[permeability_aquifer]
type = PorousFlowPermeabilityConst
block = aquifer
permeability = '1E-14 0 0 0 1E-14 0 0 0 1E-14'
[]
[permeability_caps]
type = PorousFlowPermeabilityConst
block = caps
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-16'
[]
[]
[Preconditioning]
active = basic
[basic]
type = SMP
full = true
petsc_options = '-ksp_diagonal_scale -ksp_diagonal_scale_fix'
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = ' asm lu NONZERO 2'
[]
[preferred_but_might_not_be_installed]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu mumps'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1E6
dt = 1E5
nl_rel_tol = 1E-14
[]
[Outputs]
exodus = true
[]
(modules/porous_flow/test/tests/adaptivity/tet4_adaptivity.i)
[Mesh]
[mesh]
type = GeneratedMeshGenerator
elem_type = TET4
dim = 3
nx = 2
ny = 2
[]
[]
[Adaptivity]
marker = marker
max_h_level = 1
[Markers]
[marker]
type = UniformMarker
mark = REFINE
[]
[]
[]
[GlobalParams]
PorousFlowDictator = 'dictator'
[]
[Variables]
[pp]
initial_condition = '0'
[]
[]
[Kernels]
[mass]
type = PorousFlowMassTimeDerivative
variable = pp
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = pp
gravity = '0 0 0'
[]
[]
[BCs]
[left]
type = DirichletBC
variable = pp
boundary = 'left'
value = 1
[]
[right]
type = DirichletBC
variable = pp
boundary = 'right'
value = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.2
density0 = 1
viscosity = 1
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = 'pp'
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = '0.1'
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-3 0 0 0 1e-3 0 0 0 1e-3'
[]
[relperm]
type = PorousFlowRelativePermeabilityConst
phase = 0
[]
[]
[Postprocessors]
[numdofs]
type = NumDOFs
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
end_time = 4
dt = 1
solve_type = Newton
nl_abs_tol = 1e-12
[]
[Outputs]
exodus = true
perf_graph = true
show = pp
[]
(modules/porous_flow/test/tests/jacobian/pls01.i)
# PorousFlowPiecewiseLinearSink with 1-phase, 1-component
[Mesh]
type = GeneratedMesh
dim = 2
nx = 1
ny = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Variables]
[pp]
[]
[]
[ICs]
[pp]
type = RandomIC
variable = pp
max = 0
min = -1
[]
[]
[Kernels]
[dummy]
type = TimeDerivative
variable = pp
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 1
thermal_expansion = 0
viscosity = 1.1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.1 0 0 0 2.2 0 0 0 3.3'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[BCs]
[flux]
type = PorousFlowPiecewiseLinearSink
boundary = 'left'
pt_vals = '-1 -0.5 0'
multipliers = '1 2 4'
variable = pp
fluid_phase = 0
use_relperm = true
use_mobility = true
flux_function = 'x*y'
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 2
[]
[Outputs]
file_base = pls01
[]
(modules/porous_flow/test/tests/hysteresis/hys_order_06.i)
# Test that PorousFlowHysteresisOrder correctly calculates hysteresis order
# Hysteresis order is initialised = 2, with turning points = (0.6, 0.8)
# Initial saturation is 0.71
# Water is added to the system, so order = 3 with turning point = 0.71
# Then water is added to the system until saturation = 0.8, when order = 1
# Then water is added to the system until saturation = 1.0, when order becomes zero
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = -9E5
[]
[]
[PorousFlowUnsaturated]
porepressure = pp
fp = simple_fluid
[]
[DiracKernels]
[source_sink_0]
type = PorousFlowPointSourceFromPostprocessor
point = '0 0 0'
mass_flux = sink_strength
variable = pp
[]
[source_sink_1]
type = PorousFlowPointSourceFromPostprocessor
point = '1 0 0'
mass_flux = sink_strength
variable = pp
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosityConst
porosity = 1.0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0 0 0 0 0 0 0 0 0'
[]
[hys_order]
type = PorousFlowHysteresisOrder
initial_order = 2
previous_turning_points = '0.6 0.8'
[]
[]
[AuxVariables]
[hys_order]
family = MONOMIAL
order = CONSTANT
[]
[tp0]
family = MONOMIAL
order = CONSTANT
[]
[tp1]
family = MONOMIAL
order = CONSTANT
[]
[tp2]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[hys_order]
type = PorousFlowPropertyAux
variable = hys_order
property = hysteresis_order
[]
[tp0]
type = PorousFlowPropertyAux
variable = tp0
property = hysteresis_saturation_turning_point
hysteresis_turning_point = 0
[]
[tp1]
type = PorousFlowPropertyAux
variable = tp1
property = hysteresis_saturation_turning_point
hysteresis_turning_point = 1
[]
[tp2]
type = PorousFlowPropertyAux
variable = tp2
property = hysteresis_saturation_turning_point
hysteresis_turning_point = 2
[]
[]
[Functions]
[sink_strength_fcn]
type = ParsedFunction
expression = '30'
[]
[]
[Postprocessors]
[sink_strength]
type = FunctionValuePostprocessor
function = sink_strength_fcn
outputs = 'none'
[]
[saturation]
type = PointValue
point = '0 0 0'
variable = saturation0
[]
[hys_order]
type = PointValue
point = '0 0 0'
variable = hys_order
[]
[tp0]
type = PointValue
point = '0 0 0'
variable = tp0
[]
[tp1]
type = PointValue
point = '0 0 0'
variable = tp1
[]
[tp2]
type = PointValue
point = '0 0 0'
variable = tp2
[]
[]
[Preconditioning]
[basic]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 7
nl_abs_tol = 1E-7
[]
[Outputs]
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/actions/fullsat_brine.i)
# Test the density, viscosity, enthalpy and internal energy
# calculated by the PorousFlowBrine material when using
# PorousFlowFullySaturated action.
# Density (rho) and enthalpy (h) From Driesner (2007), Geochimica et
# Cosmochimica Acta 71, 4902-4919 (2007).
# Viscosity from Phillips et al, A technical databook for
# geothermal energy utilization, LbL-12810 (1981).
# Internal energy = h - p / rho.
# Pressure 20 MPa
# Temperature 50C
# xnacl = 0.1047 (equivalent to 2.0 molality)
[Mesh]
type = GeneratedMesh
dim = 1
nx = 1
[]
[GlobalParams]
block = '0'
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[PorousFlowFullySaturated]
coupling_type = ThermoHydro
porepressure = pp
temperature = temp
mass_fraction_vars = "nacl"
fluid_properties_type = PorousFlowBrine
nacl_name = nacl
dictator_name = dictator
stabilization = none
[]
[Variables]
[pp]
initial_condition = 20E6
[]
[temp]
initial_condition = 323.15
[]
[nacl]
initial_condition = 0.1047
[]
[]
[Kernels]
# All provided by PorousFlowFullySaturated action
[]
[BCs]
[t_bdy]
type = DirichletBC
variable = temp
boundary = 'left right'
value = 323.15
[]
[p_bdy]
type = DirichletBC
variable = pp
boundary = 'left right'
value = 20E6
[]
[nacl_bdy]
type = DirichletBC
variable = nacl
boundary = 'left right'
value = 0.1047
[]
[]
[Postprocessors]
[pressure]
type = ElementIntegralVariablePostprocessor
variable = pp
[]
[temperature]
type = ElementIntegralVariablePostprocessor
variable = temp
[]
[xnacl]
type = ElementIntegralVariablePostprocessor
variable = nacl
[]
[density]
type = ElementIntegralMaterialProperty
mat_prop = 'PorousFlow_fluid_phase_density_qp0'
[]
[viscosity]
type = ElementIntegralMaterialProperty
mat_prop = 'PorousFlow_viscosity_qp0'
[]
[enthalpy]
type = ElementIntegralMaterialProperty
mat_prop = 'PorousFlow_fluid_phase_enthalpy_qp0'
[]
[energy]
type = ElementIntegralMaterialProperty
mat_prop = 'PorousFlow_fluid_phase_internal_energy_nodal0'
[]
[]
[Materials]
# Thermal conductivity
[thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '3 0 0 0 3 0 0 0 3'
wet_thermal_conductivity = '3 0 0 0 3 0 0 0 3'
[]
# Specific heat capacity
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 850
density = 2700
[]
# Permeability
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-13 0 0 0 1E-13 0 0 0 1E-13'
[]
# Porosity
[porosity]
type = PorousFlowPorosityConst
porosity = 0.3
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
file_base = fullsat_brine
csv = true
execute_on = 'timestep_end'
[]
(modules/porous_flow/test/tests/hysteresis/2phasePS_jac.i)
# Test of derivatives computed in PorousFlow2PhaseHysPS
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '-1 0 0'
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
number_fluid_phases = 2
number_fluid_components = 2
porous_flow_vars = 'pp0 sat1'
[]
[]
[Variables]
[pp0]
[]
[sat1]
initial_condition = 0.2
[]
[]
[Kernels]
[mass_conservation0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp0
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp0
[]
[mass_conservation1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sat1
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = sat1
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[]
[FluidProperties]
[simple_fluid_0]
type = SimpleFluidProperties
bulk_modulus = 10
viscosity = 1
[]
[simple_fluid_1]
type = SimpleFluidProperties
bulk_modulus = 1
viscosity = 3
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[temperature]
type = PorousFlowTemperature
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid_0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid_1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 1 0 0 0 1'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
[]
[hys_order_material]
type = PorousFlowHysteresisOrder
[]
[pc_calculator]
type = PorousFlow2PhaseHysPS
alpha_d = 10.0
alpha_w = 7.0
n_d = 1.5
n_w = 1.9
S_l_min = 0.1
S_lr = 0.2
S_gr_max = 0.3
Pc_max = 12.0
high_ratio = 0.9
low_extension_type = quadratic
high_extension_type = power
phase0_porepressure = pp0
phase1_saturation = sat1
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options = '-snes_check_jacobian'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_3comp.i)
# Pressure pulse in 1D with 1 phase but 3 components (viscosity, relperm, etc are independent of mass-fractions) - transient
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 2E6
[]
[massfrac0]
initial_condition = 0.1
[]
[massfrac1]
initial_condition = 0.3
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[flux0]
type = PorousFlowAdvectiveFlux
variable = pp
gravity = '0 0 0'
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = massfrac0
[]
[flux1]
type = PorousFlowAdvectiveFlux
variable = massfrac0
gravity = '0 0 0'
fluid_component = 1
[]
[mass2]
type = PorousFlowMassTimeDerivative
fluid_component = 2
variable = massfrac1
[]
[flux2]
type = PorousFlowAdvectiveFlux
variable = massfrac1
gravity = '0 0 0'
fluid_component = 2
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp massfrac0 massfrac1'
number_fluid_phases = 1
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac0 massfrac1'
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-15'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0
phase = 0
[]
[]
[BCs]
[left]
type = DirichletBC
boundary = left
value = 3E6
variable = pp
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol -snes_max_it -ksp_rtol -ksp_atol'
petsc_options_value = 'gmres asm lu NONZERO 2 1E-7 1E-10 20 1E-10 1E-100'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E3
end_time = 1E4
[]
[Postprocessors]
[p000]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = 'initial timestep_end'
[]
[p010]
type = PointValue
variable = pp
point = '10 0 0'
execute_on = 'initial timestep_end'
[]
[p020]
type = PointValue
variable = pp
point = '20 0 0'
execute_on = 'initial timestep_end'
[]
[p030]
type = PointValue
variable = pp
point = '30 0 0'
execute_on = 'initial timestep_end'
[]
[p040]
type = PointValue
variable = pp
point = '40 0 0'
execute_on = 'initial timestep_end'
[]
[p050]
type = PointValue
variable = pp
point = '50 0 0'
execute_on = 'initial timestep_end'
[]
[p060]
type = PointValue
variable = pp
point = '60 0 0'
execute_on = 'initial timestep_end'
[]
[p070]
type = PointValue
variable = pp
point = '70 0 0'
execute_on = 'initial timestep_end'
[]
[p080]
type = PointValue
variable = pp
point = '80 0 0'
execute_on = 'initial timestep_end'
[]
[p090]
type = PointValue
variable = pp
point = '90 0 0'
execute_on = 'initial timestep_end'
[]
[p100]
type = PointValue
variable = pp
point = '100 0 0'
execute_on = 'initial timestep_end'
[]
[mf_0_010]
type = PointValue
variable = massfrac0
point = '10 0 0'
execute_on = 'timestep_end'
[]
[mf_1_010]
type = PointValue
variable = massfrac1
point = '10 0 0'
execute_on = 'timestep_end'
[]
[]
[Outputs]
file_base = pressure_pulse_1d_3comp
print_linear_residuals = true
csv = true
[]
(modules/porous_flow/test/tests/infiltration_and_drainage/wli02.i)
[Mesh]
type = GeneratedMesh
dim = 2
nx = 50
ny = 1
xmin = -1000
xmax = 0
ymin = 0
ymax = 0.05
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = pressure
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureBW
Sn = 0.0
Ss = 1.0
C = 1.5
las = 2
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 4
density0 = 10
thermal_expansion = 0
[]
[]
[Materials]
[massfrac]
type = PorousFlowMassFraction
[]
[temperature]
type = PorousFlowTemperature
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pressure
capillary_pressure = pc
[]
[relperm]
type = PorousFlowRelativePermeabilityBW
Sn = 0.0
Ss = 1.0
Kn = 0
Ks = 1
C = 1.5
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.25
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 1 0 0 0 1'
[]
[]
[Variables]
[pressure]
initial_condition = -1E-4
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pressure
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pressure
gravity = '-0.1 0 0'
[]
[]
[AuxVariables]
[SWater]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[SWater]
type = MaterialStdVectorAux
property = PorousFlow_saturation_qp
index = 0
variable = SWater
[]
[]
[BCs]
[base]
type = DirichletBC
boundary = 'left'
value = -1E-4
variable = pressure
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu NONZERO 2 1E-10 1E-10 10000'
[]
[]
[VectorPostprocessors]
[swater]
type = LineValueSampler
warn_discontinuous_face_values = false
variable = SWater
start_point = '-1000 0 0'
end_point = '0 0 0'
sort_by = x
num_points = 71
execute_on = timestep_end
[]
[]
[Executioner]
type = Transient
solve_type = Newton
petsc_options = '-snes_converged_reason'
end_time = 100
dt = 5
[]
[Outputs]
file_base = wli02
sync_times = '100 500 1000'
[exodus]
type = Exodus
sync_only = true
[]
[along_line]
type = CSV
sync_only = true
[]
[]
(modules/porous_flow/examples/tidal/atm_tides_open_hole.i)
# A 100m x 10m "slab" of height 100m is subjected to cyclic pressure at its top
# Assumptions:
# the boundaries are impermeable, except the top boundary
# only vertical displacement is allowed
# the atmospheric pressure sets the total stress at the top of the model
# at the slab left-hand side there is a borehole that taps into the base of the slab.
[Mesh]
[the_mesh]
type = GeneratedMeshGenerator
dim = 3
nx = 10
ny = 1
nz = 10
xmin = 0
xmax = 100
ymin = -5
ymax = 5
zmin = -100
zmax = 0
[]
[bh_back]
type = ExtraNodesetGenerator
coord = '0 -5 -100'
input = the_mesh
new_boundary = 11
[]
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
PorousFlowDictator = dictator
block = 0
biot_coefficient = 0.6
multiply_by_density = false
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[porepressure]
scaling = 1E11
[]
[]
[ICs]
[porepressure]
type = FunctionIC
variable = porepressure
function = '-10000*z' # this is only approximately correct
[]
[]
[Functions]
[ini_stress_zz]
type = ParsedFunction
expression = '(25000 - 0.6*10000)*z' # remember this is effective stress
[]
[cyclic_porepressure]
type = ParsedFunction
expression = 'if(t>0,5000 * sin(2 * pi * t / 3600.0 / 24.0),0)'
[]
[cyclic_porepressure_at_depth]
type = ParsedFunction
expression = '-10000*z + if(t>0,5000 * sin(2 * pi * t / 3600.0 / 24.0),0)'
[]
[neg_cyclic_porepressure]
type = ParsedFunction
expression = '-if(t>0,5000 * sin(2 * pi * t / 3600.0 / 24.0),0)'
[]
[]
[BCs]
# zmin is called 'back'
# zmax is called 'front'
# ymin is called 'bottom'
# ymax is called 'top'
# xmin is called 'left'
# xmax is called 'right'
[no_x_disp]
type = DirichletBC
variable = disp_x
value = 0
boundary = 'bottom top' # because of 1-element meshing, this fixes u_x=0 everywhere
[]
[no_y_disp]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'bottom top' # because of 1-element meshing, this fixes u_y=0 everywhere
[]
[no_z_disp_at_bottom]
type = DirichletBC
variable = disp_z
value = 0
boundary = back
[]
[pp]
type = FunctionDirichletBC
variable = porepressure
function = cyclic_porepressure
boundary = front
[]
[pp_downhole]
type = FunctionDirichletBC
variable = porepressure
function = cyclic_porepressure_at_depth
boundary = 11
[]
[total_stress_at_top]
type = FunctionNeumannBC
variable = disp_z
function = neg_cyclic_porepressure
boundary = front
[]
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
thermal_expansion = 0.0
bulk_modulus = 2E9
viscosity = 1E-3
density0 = 1000.0
[]
[]
[PorousFlowBasicTHM]
coupling_type = HydroMechanical
displacements = 'disp_x disp_y disp_z'
porepressure = porepressure
gravity = '0 0 -10'
fp = the_simple_fluid
[]
[Materials]
[elasticity_tensor]
type = ComputeIsotropicElasticityTensor
bulk_modulus = 10.0E9 # drained bulk modulus
poissons_ratio = 0.25
[]
[strain]
type = ComputeSmallStrain
eigenstrain_names = ini_stress
[]
[stress]
type = ComputeLinearElasticStress
[]
[ini_stress]
type = ComputeEigenstrainFromInitialStress
initial_stress = '0 0 0 0 0 0 0 0 ini_stress_zz'
eigenstrain_name = ini_stress
[]
[porosity]
type = PorousFlowPorosityConst # only the initial value of this is ever used
porosity = 0.1
[]
[biot_modulus]
type = PorousFlowConstantBiotModulus
solid_bulk_compliance = 1E-10
fluid_bulk_modulus = 2E9
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-14 0 0 0 1E-14 0 0 0 1E-14'
[]
[density]
type = GenericConstantMaterial
prop_names = density
prop_values = 2500.0
[]
[]
[Postprocessors]
[p0_0]
type = PointValue
outputs = csv
point = '0 0 0'
variable = porepressure
[]
[p100_0]
type = PointValue
outputs = csv
point = '100 0 0'
variable = porepressure
[]
[p0_100]
type = PointValue
outputs = csv
point = '0 0 -100'
variable = porepressure
[]
[p100_100]
type = PointValue
outputs = csv
point = '100 0 -100'
variable = porepressure
[]
[uz0]
type = PointValue
outputs = csv
point = '0 0 0'
variable = disp_z
[]
[uz100]
type = PointValue
outputs = csv
point = '100 0 0'
variable = disp_z
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
start_time = -3600
dt = 3600
end_time = 172800
nl_rel_tol = 1E-10
nl_abs_tol = 1E-5
[]
[Outputs]
print_linear_residuals = false
csv = true
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phasePS_KT.i)
# Pressure pulse in 1D with 2 phases, 2components - transient
# Using KT stabilization
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[ppwater]
initial_condition = 2e6
[]
[sgas]
initial_condition = 0.3
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[ppgas]
family = MONOMIAL
order = FIRST
[]
[]
[Kernels]
[mass_component0]
type = PorousFlowMassTimeDerivative
variable = ppwater
fluid_component = 0
[]
[flux_component0_phase0]
type = PorousFlowFluxLimitedTVDAdvection
variable = ppwater
advective_flux_calculator = afc_component0_phase0
[]
[flux_component0_phase1]
type = PorousFlowFluxLimitedTVDAdvection
variable = ppwater
advective_flux_calculator = afc_component0_phase1
[]
[mass_component1]
type = PorousFlowMassTimeDerivative
variable = sgas
fluid_component = 1
[]
[flux_component1_phase0]
type = PorousFlowFluxLimitedTVDAdvection
variable = sgas
advective_flux_calculator = afc_component1_phase0
[]
[flux_component1_phase1]
type = PorousFlowFluxLimitedTVDAdvection
variable = sgas
advective_flux_calculator = afc_component1_phase1
[]
[]
[AuxKernels]
[ppgas]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = ppgas
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater sgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 1e5
[]
[afc_component0_phase0]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
fluid_component = 0
phase = 0
flux_limiter_type = superbee
[]
[afc_component0_phase1]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
fluid_component = 0
phase = 1
flux_limiter_type = superbee
[]
[afc_component1_phase0]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
fluid_component = 1
phase = 0
flux_limiter_type = superbee
[]
[afc_component1_phase1]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
fluid_component = 1
phase = 1
flux_limiter_type = superbee
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 2e7
density0 = 1
thermal_expansion = 0
viscosity = 1e-5
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = ppwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-15 0 0 0 1e-15 0 0 0 1e-15'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 1
[]
[]
[BCs]
[leftwater]
type = DirichletBC
boundary = left
value = 3e6
variable = ppwater
[]
[rightwater]
type = DirichletBC
boundary = right
value = 2e6
variable = ppwater
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-20 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1e3
end_time = 1e4
[]
[VectorPostprocessors]
[pp]
type = LineValueSampler
warn_discontinuous_face_values = false
sort_by = x
variable = 'ppwater ppgas'
start_point = '0 0 0'
end_point = '100 0 0'
num_points = 11
[]
[]
[Outputs]
file_base = pressure_pulse_1d_2phasePS_KT
print_linear_residuals = false
[csv]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/test/tests/dirackernels/bh03.i)
# fully-saturated
# injection
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 0
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
variable = pp
SumQuantityUO = borehole_total_outflow_mass
point_file = bh03.bh
function_of = pressure
fluid_phase = 0
bottom_p_or_t = 'insitu_pp'
unit_weight = '0 0 0'
use_mobility = true
character = -1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
indirect_dependencies = 'fluid_mass1 fluid_mass0 bh_report'
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
expression = abs((a-c+d)/2/(a+c))
symbol_names = 'a c d'
symbol_values = 'fluid_mass1 fluid_mass0 bh_report'
[]
[insitu_pp]
type = ParsedFunction
expression = '-2e7*z' #bh_bottom is located at z=-0.5
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
[Outputs]
file_base = bh03
exodus = false
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/test/tests/chemistry/2species_predis.i)
# PorousFlow analogy of chemical_reactions/test/tests/solid_kinetics/2species_without_action.i
#
# Simple equilibrium reaction example to illustrate the use of PorousFlowAqueousPreDisChemistry
#
# In this example, two primary species a and b diffuse towards each other from
# opposite ends of a porous medium, reacting when they meet to form a mineral
# precipitate. The kinetic reaction is
#
# a + b = mineral
#
# where a and b are the primary species (reactants), and mineral is the precipitate.
# At the time of writing, the results of this test differ from chemical_reactions because
# in PorousFlow the mineral_concentration is measured in m^3 (precipitate) / m^3 (porous_material)
# in chemical_reactions the mineral_concentration is measured in m^3 (precipitate) / m^3 (fluid)
# ie, PorousFlow_mineral_concentration = porosity * chemical_reactions_mineral_concentration
[Mesh]
type = GeneratedMesh
dim = 2
xmax = 1
ymax = 1
nx = 40
[]
[Variables]
[a]
order = FIRST
family = LAGRANGE
initial_condition = 0
[]
[b]
order = FIRST
family = LAGRANGE
initial_condition = 0
[]
[]
[AuxVariables]
[eqm_k]
initial_condition = 1E-6
[]
[pressure]
[]
[mineral]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[mineral]
type = PorousFlowPropertyAux
property = mineral_concentration
mineral_species = 0
variable = mineral
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Kernels]
[mass_a]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = a
[]
[diff_a]
type = PorousFlowDispersiveFlux
variable = a
fluid_component = 0
disp_trans = 0
disp_long = 0
[]
[predis_a]
type = PorousFlowPreDis
variable = a
mineral_density = 1000
stoichiometry = 1
[]
[mass_b]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = b
[]
[diff_b]
type = PorousFlowDispersiveFlux
variable = b
fluid_component = 1
disp_trans = 0
disp_long = 0
[]
[predis_b]
type = PorousFlowPreDis
variable = b
mineral_density = 1000
stoichiometry = 1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'a b'
number_fluid_phases = 1
number_fluid_components = 3
number_aqueous_kinetic = 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9 # huge, so mimic chemical_reactions
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 298.15
[]
[ppss]
type = PorousFlow1PhaseFullySaturated
porepressure = pressure
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'a b'
[]
[chem]
type = PorousFlowAqueousPreDisChemistry
primary_concentrations = 'a b'
num_reactions = 1
equilibrium_constants = eqm_k
primary_activity_coefficients = '1 1'
reactions = '1 1'
specific_reactive_surface_area = '1.0'
kinetic_rate_constant = '1.0e-8'
activation_energy = '1.5e4'
molar_volume = 1
gas_constant = 8.314
reference_temperature = 298.15
[]
[mineral_conc]
type = PorousFlowAqueousPreDisMineral
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.4
[]
[permeability]
type = PorousFlowPermeabilityConst
# porous_flow permeability / porous_flow viscosity = chemical_reactions conductivity = 4E-3
permeability = '4E-6 0 0 0 4E-6 0 0 0 4E-6'
[]
[relp]
type = PorousFlowRelativePermeabilityConst
phase = 0
[]
[diff]
type = PorousFlowDiffusivityConst
# porous_flow diffusion_coeff * tortuousity * porosity = chemical_reactions diffusivity = 5E-4
diffusion_coeff = '12.5E-4 12.5E-4 12.5E-4'
tortuosity = 1.0
[]
[]
[BCs]
[a_left]
type = DirichletBC
variable = a
boundary = left
value = 1.0e-2
[]
[a_right]
type = DirichletBC
variable = a
boundary = right
value = 0
[]
[b_left]
type = DirichletBC
variable = b
boundary = left
value = 0
[]
[b_right]
type = DirichletBC
variable = b
boundary = right
value = 1.0e-2
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 5
end_time = 50
[]
[Outputs]
print_linear_residuals = true
exodus = true
perf_graph = true
hide = eqm_k
[]
(modules/porous_flow/test/tests/jacobian/fflux02_fully_saturated.i)
# Using PorousFlowFullySaturatedAdvectiveFlux
# 1phase, 3components, constant insitu permeability
# density with constant bulk, constant viscosity, nonzero gravity
[Mesh]
type = GeneratedMesh
dim = 1
nx = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[massfrac0]
[]
[massfrac1]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = -0.7+x+y
[]
[massfrac0]
type = RandomIC
variable = massfrac0
min = 0
max = 0.3
[]
[massfrac1]
type = RandomIC
variable = massfrac1
min = 0
max = 0.4
[]
[]
[Kernels]
[flux0]
type = PorousFlowFullySaturatedAdvectiveFlux
fluid_component = 0
variable = pp
gravity = '-1 -0.1 0'
[]
[flux1]
type = PorousFlowFullySaturatedAdvectiveFlux
fluid_component = 1
variable = massfrac0
gravity = '-1 -0.1 0'
[]
[flux2]
type = PorousFlowFullySaturatedAdvectiveFlux
fluid_component = 2
variable = massfrac1
gravity = '-1 -0.1 0'
[]
[flux0_nodensity]
type = PorousFlowFullySaturatedAdvectiveFlux
fluid_component = 0
variable = pp
gravity = '-1 -0.1 0'
multiply_by_density = false
[]
[flux1_nodensity]
type = PorousFlowFullySaturatedAdvectiveFlux
fluid_component = 1
variable = massfrac0
gravity = '-1 -0.1 0'
multiply_by_density = false
[]
[flux2_nodensity]
type = PorousFlowFullySaturatedAdvectiveFlux
fluid_component = 2
variable = massfrac1
gravity = '-1 -0.1 0'
multiply_by_density = false
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp massfrac0 massfrac1'
number_fluid_phases = 1
number_fluid_components = 3
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseFullySaturated
porepressure = pp
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac0 massfrac1'
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '2 0 0 0 2 0 0 0 3'
[]
[]
[Preconditioning]
active = check
[check]
type = SMP
full = true
petsc_options_iname = '-snes_type'
petsc_options_value = 'test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
num_steps = 1
[]
(modules/porous_flow/test/tests/gravity/grav02e.i)
# Checking that gravity head is established in the transient situation when 0<=saturation<=1 (note the less-than-or-equal-to).
# 2phase (PS), 2components, constant capillary pressure, constant fluid bulk-moduli for each phase, constant viscosity,
# constant permeability, Corey relative permeabilities with no residual saturation
[Mesh]
type = GeneratedMesh
dim = 2
ny = 10
ymax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 -10 0'
[]
[Variables]
[ppwater]
initial_condition = 1.5e6
[]
[sgas]
initial_condition = 0.3
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[ppgas]
family = MONOMIAL
order = FIRST
[]
[swater]
family = MONOMIAL
order = FIRST
[]
[relpermwater]
family = MONOMIAL
order = FIRST
[]
[relpermgas]
family = MONOMIAL
order = FIRST
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = ppwater
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = sgas
[]
[]
[AuxKernels]
[ppgas]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = ppgas
[]
[swater]
type = PorousFlowPropertyAux
property = saturation
phase = 0
variable = swater
[]
[relpermwater]
type = PorousFlowPropertyAux
property = relperm
phase = 0
variable = relpermwater
[]
[relpermgas]
type = PorousFlowPropertyAux
property = relperm
phase = 1
variable = relpermgas
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater sgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 1e5
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
viscosity = 1e-3
thermal_expansion = 0
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 10
viscosity = 1e-5
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = ppwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-11 0 0 0 1e-11 0 0 0 1e-11'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
[]
[]
[Postprocessors]
[mass_ph0]
type = PorousFlowFluidMass
fluid_component = 0
execute_on = 'initial timestep_end'
[]
[mass_ph1]
type = PorousFlowFluidMass
fluid_component = 1
execute_on = 'initial timestep_end'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol'
petsc_options_value = 'bcgs bjacobi 1E-12 1E-10'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1e5
[TimeStepper]
type = IterationAdaptiveDT
dt = 1e4
[]
[]
[Outputs]
execute_on = 'initial timestep_end'
file_base = grav02e
exodus = true
perf_graph = true
csv = false
[]
(modules/porous_flow/test/tests/jacobian/fflux07.i)
# 2phase (PS), 2components (that exist in both phases), constant viscosity, constant insitu permeability
# density with constant bulk, Corey relative perm, nonzero gravity, vanGenuchten capillary pressure
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[sgas]
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
[]
[massfrac_ph1_sp0]
[]
[]
[ICs]
[ppwater]
type = RandomIC
variable = ppwater
min = 0
max = 1
[]
[ppgas]
type = RandomIC
variable = sgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 1
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 1
[]
[]
[Kernels]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = ppwater
gravity = '-1 -0.1 0'
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = sgas
gravity = '-1 -0.1 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater sgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
pc_max = 10
sat_lr = 0.1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = ppwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.1
sum_s_res = 0.1
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
s_res = 0.0
sum_s_res = 0.1
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-snes_type'
petsc_options_value = 'test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/dirackernels/bh04.i)
# fully-saturated
# production
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Functions]
[dts]
type = PiecewiseLinear
y = '1E-2 1E-1 1 1E1 1E2 1E3'
x = '0 1E-1 1 1E1 1E2 1E3'
[]
[]
[Variables]
[pp]
initial_condition = 0
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.8
alpha = 1e-5
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[relperm]
type = PorousFlowRelativePermeabilityFLAC
m = 2
phase = 0
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
variable = pp
SumQuantityUO = borehole_total_outflow_mass
point_file = bh02.bh
fluid_phase = 0
bottom_p_or_t = -1E6
unit_weight = '0 0 0'
use_mobility = true
character = 1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
indirect_dependencies = 'fluid_mass1 fluid_mass0 bh_report'
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
expression = abs((a-c+d)/2/(a+c))
symbol_names = 'a c d'
symbol_values = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 1E3
solve_type = NEWTON
[TimeStepper]
type = FunctionDT
function = dts
[]
[]
[Outputs]
file_base = bh04
exodus = false
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/test/tests/actions/fullsat_brine_except2.i)
# Check error when using PorousFlowFullySaturated action,
# attempting to use both brine and single-component fluids
[Mesh]
type = GeneratedMesh
dim = 1
nx = 1
[]
[GlobalParams]
block = '0'
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[PorousFlowFullySaturated]
coupling_type = ThermoHydro
porepressure = pp
temperature = temp
mass_fraction_vars = "nacl"
fluid_properties_type = PorousFlowBrine
nacl_name = nacl
fp = simple_fluid
dictator_name = dictator
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
[]
[]
[Variables]
[pp]
initial_condition = 20E6
[]
[temp]
initial_condition = 323.15
[]
[nacl]
initial_condition = 0.1047
[]
[]
[Kernels]
# All provided by PorousFlowFullySaturated action
[]
[BCs]
[t_bdy]
type = DirichletBC
variable = temp
boundary = 'left right'
value = 323.15
[]
[p_bdy]
type = DirichletBC
variable = pp
boundary = 'left right'
value = 20E6
[]
[nacl_bdy]
type = DirichletBC
variable = nacl
boundary = 'left right'
value = 0.1047
[]
[]
[Materials]
# Thermal conductivity
[thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '3 0 0 0 3 0 0 0 3'
wet_thermal_conductivity = '3 0 0 0 3 0 0 0 3'
[]
# Specific heat capacity
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 850
density = 2700
[]
# Permeability
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-13 0 0 0 1E-13 0 0 0 1E-13'
[]
# Porosity
[porosity]
type = PorousFlowPorosityConst
porosity = 0.3
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
file_base = fullsat_brine_except2
[]
(modules/porous_flow/test/tests/energy_conservation/heat04_fullysat_action.i)
# heat04, but using an action
#
# The sample is a single unit element, with fixed displacements on
# all sides. A heat source of strength S (J/m^3/s) is applied into
# the element. There is no fluid flow or heat flow. The rise
# in temperature, porepressure and stress, and the change in porosity is
# matched with theory.
#
# In this case, fluid mass must be conserved, and there is no
# volumetric strain, so
# porosity * fluid_density = constant
# Also, the energy-density in the rock-fluid system increases with S:
# d/dt [(1 - porosity) * rock_density * rock_heat_cap * T + porosity * fluid_density * fluid_heat_cap * T] = S
# Also, the porosity evolves according to THM as
# porosity = biot + (porosity0 - biot) * exp( (biot - 1) * P / fluid_bulk + rock_thermal_exp * T)
# Finally, the effective stress must be exactly zero (as there is
# no strain).
#
# Let us assume that
# fluid_density = dens0 * exp(P / fluid_bulk - fluid_thermal_exp * T)
# Then the conservation of fluid mass means
# porosity = por0 * exp(- P / fluid_bulk + fluid_thermal_exp * T)
# where dens0 * por0 = the initial fluid mass.
# The last expression for porosity, combined with the THM one,
# and assuming that biot = 1 for simplicity, gives
# porosity = 1 + (porosity0 - 1) * exp(rock_thermal_exp * T) = por0 * exp(- P / fluid_bulk + fluid_thermal_exp * T) .... (A)
#
# This stuff may be substituted into the heat energy-density equation:
# S = d/dt [(1 - porosity0) * exp(rock_thermal_exp * T) * rock_density * rock_heat_cap * T + porosity * fluid_density * fluid_heat_cap * T]
#
# If S is constant then
# S * t = (1 - porosity0) * exp(rock_thermal_exp * T) * rock_density * rock_heat_cap * T + porosity * fluid_density * fluid_heat_cap * T
# with T(t=0) = 0 then Eqn(A) implies that por0 = porosity0 and
# P / fluid_bulk = fluid_thermal_exp * T - log(1 + (por0 - 1) * exp(rock_thermal_exp * T)) + log(por0)
#
# Parameters:
# A = 2
# fluid_bulk = 2.0
# dens0 = 3.0
# fluid_thermal_exp = 0.5
# fluid_heat_cap = 2
# por0 = 0.5
# rock_thermal_exp = 0.25
# rock_density = 5
# rock_heat_capacity = 0.2
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -0.5
xmax = 0.5
ymin = -0.5
ymax = 0.5
zmin = -0.5
zmax = 0.5
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
thermal_expansion = 0.5
cv = 2
cp = 2
bulk_modulus = 2.0
density0 = 3.0
[]
[]
[PorousFlowFullySaturated]
coupling_type = ThermoHydroMechanical
displacements = 'disp_x disp_y disp_z'
porepressure = pp
temperature = temp
dictator_name = Sir
biot_coefficient = 1.0
gravity = '0 0 0'
fp = the_simple_fluid
stabilization = none
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
PorousFlowDictator = Sir
block = 0
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[pp]
[]
[temp]
[]
[]
[BCs]
[confinex]
type = DirichletBC
variable = disp_x
value = 0
boundary = 'left right'
[]
[confiney]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'bottom top'
[]
[confinez]
type = DirichletBC
variable = disp_z
value = 0
boundary = 'back front'
[]
[]
[Kernels]
[heat_source]
type = BodyForce
function = 1
variable = temp
[]
[]
[Functions]
[err_T_fcn]
type = ParsedFunction
symbol_names = 'por0 rte temp rd rhc m0 fhc source'
symbol_values = '0.5 0.25 t0 5 0.2 1.5 2 1'
expression = '((1-por0)*exp(rte*temp)*rd*rhc*temp+m0*fhc*temp-source*t)/(source*t)'
[]
[err_pp_fcn]
type = ParsedFunction
symbol_names = 'por0 rte temp rd rhc m0 fhc source bulk pp fte'
symbol_values = '0.5 0.25 t0 5 0.2 1.5 2 1 2 p0 0.5'
expression = '(bulk*(fte*temp-log(1+(por0-1)*exp(rte*temp))+log(por0))-pp)/pp'
[]
[]
[AuxVariables]
[porosity]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[porosity]
type = PorousFlowPropertyAux
property = porosity
variable = porosity
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '1 1.5'
# bulk modulus is lambda + 2*mu/3 = 1 + 2*1.5/3 = 2
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[porosity]
type = PorousFlowPorosity
thermal = true
fluid = true
mechanical = true
ensure_positive = false
biot_coefficient = 1.0
porosity_zero = 0.5
thermal_expansion_coeff = 0.25
solid_bulk = 2
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 0.2
density = 5.0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0 0 0 0 0 0 0 0 0'
[]
[thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '0 0 0 0 0 0 0 0 0'
[]
[]
[Postprocessors]
[p0]
type = PointValue
outputs = 'console csv'
execute_on = 'timestep_end'
point = '0 0 0'
variable = pp
[]
[t0]
type = PointValue
outputs = 'console csv'
execute_on = 'timestep_end'
point = '0 0 0'
variable = temp
[]
[porosity]
type = PointValue
outputs = 'console csv'
execute_on = 'timestep_end'
point = '0 0 0'
variable = porosity
[]
[stress_xx]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_xx
[]
[stress_yy]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_yy
[]
[stress_zz]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_zz
[]
[fluid_mass]
type = PorousFlowFluidMass
fluid_component = 0
execute_on = 'timestep_end'
outputs = 'console csv'
[]
[total_heat]
type = PorousFlowHeatEnergy
phase = 0
execute_on = 'timestep_end'
outputs = 'console csv'
[]
[err_T]
type = FunctionValuePostprocessor
function = err_T_fcn
[]
[err_P]
type = FunctionValuePostprocessor
function = err_pp_fcn
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-12 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 5
[]
[Outputs]
execute_on = 'initial timestep_end'
file_base = heat04_fullysat_action
csv = true
[]
(modules/porous_flow/test/tests/dirackernels/bh_except04.i)
# PorousFlowPeacemanBorehole exception test
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = TimeDerivative
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
at_nodes = true # Needed to force exepected error
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
bottom_p_or_t = 0
fluid_phase = 0
function_of = temperature
point_file = bh02.bh
SumQuantityUO = borehole_total_outflow_mass
variable = pp
unit_weight = '0 0 0'
character = 1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
expression = abs((a-c+d)/2/(a+c))
symbol_names = 'a c d'
symbol_values = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
(modules/porous_flow/test/tests/sinks/s09.i)
# Apply a piecewise-linear sink flux to the right-hand side and watch fluid flow to it
#
# This test has a single phase with two components. The test initialises with
# the porous material fully filled with component=1. The left-hand side is fixed
# at porepressure=1 and mass-fraction of the zeroth component being unity.
# The right-hand side has a very strong piecewise-linear flux that keeps the
# porepressure~0 at that side. Fluid mass is extracted by this flux in proportion
# to the fluid component mass fraction.
#
# Therefore, the zeroth fluid component will flow from left to right (down the
# pressure gradient).
#
# The important DE is
# porosity * dc/dt = (perm / visc) * grad(P) * grad(c)
# which is true for c = mass-fraction, and very large bulk modulus of the fluid.
# For grad(P) constant in time and space (as in this example) this is just the
# advection equation for c, with velocity = perm / visc / porosity. The parameters
# are chosen to velocity = 1 m/s.
# In the numerical world, and especially with full upwinding, the advection equation
# suffers from diffusion. In this example, the diffusion is obvious when plotting
# the mass-fraction along the line, but the average velocity of the front is still
# correct at 1 m/s.
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
xmin = 0
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp frac'
number_fluid_phases = 1
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Variables]
[pp]
[]
[frac]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = 1-x
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = frac
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = pp
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
gravity = '0 0 0'
variable = frac
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
gravity = '0 0 0'
variable = pp
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1e10 # need large in order for constant-velocity advection
density0 = 1 # almost irrelevant, except that the ability of the right BC to keep P fixed at zero is related to density_P0
thermal_expansion = 0
viscosity = 11
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = frac
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.1 0 0 0 1.1 0 0 0 1.1'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2 # irrelevant in this fully-saturated situation
phase = 0
[]
[]
[BCs]
[lhs_fixed_a]
type = DirichletBC
boundary = 'left'
variable = frac
value = 1
[]
[lhs_fixed_b]
type = DirichletBC
boundary = 'left'
variable = pp
value = 1
[]
[flux0]
type = PorousFlowPiecewiseLinearSink
boundary = 'right'
pt_vals = '-100 100'
multipliers = '-1 1'
variable = frac # the zeroth comonent
mass_fraction_component = 0
use_mobility = false
use_relperm = false
fluid_phase = 0
flux_function = 1E4
[]
[flux1]
type = PorousFlowPiecewiseLinearSink
boundary = 'right'
pt_vals = '-100 100'
multipliers = '-1 1'
variable = pp # comonent 1
mass_fraction_component = 1
use_mobility = false
use_relperm = false
fluid_phase = 0
flux_function = 1E4
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_max_it -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu 10000 NONZERO 2'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E-2
end_time = 1
nl_rel_tol = 1E-12
nl_abs_tol = 1E-12
[]
[VectorPostprocessors]
[mf]
type = LineValueSampler
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 100
sort_by = x
variable = frac
[]
[]
[Outputs]
file_base = s09
[console]
type = Console
execute_on = 'nonlinear linear'
[]
[csv]
type = CSV
sync_times = '0.1 0.5 1'
sync_only = true
[]
time_step_interval = 10
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_MD.i)
# Pressure pulse in 1D with 1 phase - transient
# Using the "MD" formulation (where primary variable is log(mass-density
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[md]
# initial porepressure = 2E6
# so initial md = log(density_P0) + porepressure/bulk_modulus =
initial_condition = 6.90875527898214
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = md
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = md
gravity = '0 0 0'
fluid_component = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'md'
number_fluid_phases = 1
number_fluid_components = 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseMD_Gaussian
mass_density = md
al = 1E-6 # this is irrelevant in this example
density_P0 = 1000
bulk_modulus = 2E9
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-15'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0
phase = 0
[]
[]
[BCs]
[left]
type = DirichletBC
boundary = left
# BC porepressure = 3E6
# so boundary md = log(density_P0) + porepressure/bulk_modulus =
value = 6.90925527898214
variable = md
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E3
end_time = 1E4
[]
[AuxVariables]
[pp]
[]
[]
[AuxKernels]
[pp]
type = ParsedAux
expression = '(md-6.9077552789821)*2.0E9'
coupled_variables = 'md'
variable = pp
[]
[]
[Postprocessors]
[p000]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = 'initial timestep_end'
[]
[p010]
type = PointValue
variable = pp
point = '10 0 0'
execute_on = 'initial timestep_end'
[]
[p020]
type = PointValue
variable = pp
point = '20 0 0'
execute_on = 'initial timestep_end'
[]
[p030]
type = PointValue
variable = pp
point = '30 0 0'
execute_on = 'initial timestep_end'
[]
[p040]
type = PointValue
variable = pp
point = '40 0 0'
execute_on = 'initial timestep_end'
[]
[p050]
type = PointValue
variable = pp
point = '50 0 0'
execute_on = 'initial timestep_end'
[]
[p060]
type = PointValue
variable = pp
point = '60 0 0'
execute_on = 'initial timestep_end'
[]
[p070]
type = PointValue
variable = pp
point = '70 0 0'
execute_on = 'initial timestep_end'
[]
[p080]
type = PointValue
variable = pp
point = '80 0 0'
execute_on = 'initial timestep_end'
[]
[p090]
type = PointValue
variable = pp
point = '90 0 0'
execute_on = 'initial timestep_end'
[]
[p100]
type = PointValue
variable = pp
point = '100 0 0'
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
file_base = pressure_pulse_1d_MD
print_linear_residuals = false
csv = true
[]
(modules/porous_flow/test/tests/flux_limited_TVD_pflow/pffltvd_2D.i)
# Using flux-limited TVD advection ala Kuzmin and Turek, employing PorousFlow Kernels and UserObjects, with superbee flux-limiter
# 3D version
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
xmin = 0
xmax = 1
ny = 4
ymin = 0
ymax = 0.5
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[porepressure]
[]
[tracer]
[]
[]
[ICs]
[porepressure]
type = FunctionIC
variable = porepressure
function = '1 - x'
[]
[tracer]
type = FunctionIC
variable = tracer
function = 'if(x<0.1,0,if(x>0.3,0,1))'
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = tracer
[]
[flux0]
type = PorousFlowFluxLimitedTVDAdvection
variable = tracer
advective_flux_calculator = advective_flux_calculator_0
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = porepressure
[]
[flux1]
type = PorousFlowFluxLimitedTVDAdvection
variable = porepressure
advective_flux_calculator = advective_flux_calculator_1
[]
[]
[BCs]
[constant_injection_porepressure]
type = DirichletBC
variable = porepressure
value = 1
boundary = left
[]
[no_tracer_on_left]
type = DirichletBC
variable = tracer
value = 0
boundary = left
[]
[remove_component_1]
type = PorousFlowPiecewiseLinearSink
variable = porepressure
boundary = right
fluid_phase = 0
pt_vals = '0 1E3'
multipliers = '0 1E3'
mass_fraction_component = 1
use_mobility = true
flux_function = 1E3
[]
[remove_component_0]
type = PorousFlowPiecewiseLinearSink
variable = tracer
boundary = right
fluid_phase = 0
pt_vals = '0 1E3'
multipliers = '0 1E3'
mass_fraction_component = 0
use_mobility = true
flux_function = 1E3
[]
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2E9
thermal_expansion = 0
viscosity = 1.0
density0 = 1000.0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure tracer'
number_fluid_phases = 1
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
[]
[advective_flux_calculator_0]
type = PorousFlowAdvectiveFluxCalculatorSaturatedMultiComponent
flux_limiter_type = superbee
fluid_component = 0
[]
[advective_flux_calculator_1]
type = PorousFlowAdvectiveFluxCalculatorSaturatedMultiComponent
flux_limiter_type = superbee
fluid_component = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = porepressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = tracer
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = the_simple_fluid
phase = 0
[]
[relperm]
type = PorousFlowRelativePermeabilityConst
phase = 0
[]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-2 0 0 0 1E-2 0 0 0 1E-2'
[]
[]
[Preconditioning]
active = basic
[basic]
type = SMP
full = true
petsc_options = '-ksp_diagonal_scale -ksp_diagonal_scale_fix'
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = ' asm lu NONZERO 2'
[]
[preferred_but_might_not_be_installed]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu mumps'
[]
[]
[VectorPostprocessors]
[tracer]
type = LineValueSampler
start_point = '0 0 0'
end_point = '1 0.5 0'
num_points = 11
sort_by = x
variable = tracer
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 6
dt = 6E-2
nl_abs_tol = 1E-8
timestep_tolerance = 1E-3
[]
[Outputs]
[out]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/test/tests/dirackernels/bh_except12.i)
# PorousFlowPeacemanBorehole exception test
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = TimeDerivative
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
bottom_p_or_t = 0
fluid_phase = 0
point_file = does_not_exist
SumQuantityUO = borehole_total_outflow_mass
variable = pp
unit_weight = '0 0 0'
character = 1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
expression = abs((a-c+d)/2/(a+c))
symbol_names = 'a c d'
symbol_values = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
(modules/porous_flow/test/tests/dirackernels/bh02.i)
# fully-saturated
# production
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[UserObjects]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
# Because the Variable for this Sink is pp, and pp is associated
# with the fluid-mass conservation equation, this sink is extracting
# fluid mass (and not heat energy or something else)
variable = pp
# The following specfies that the total fluid mass coming out of
# the porespace via this sink in this timestep should be recorded
# in the pls_total_outflow_mass UserObject
SumQuantityUO = borehole_total_outflow_mass
# The following file defines the polyline geometry
# which is just two points in this particular example
point_file = bh02.bh
# First, we want Peacemans f to be a function of porepressure (and not
# temperature or something else). So bottom_p_or_t is actually porepressure
function_of = pressure
fluid_phase = 0
# The bottomhole pressure
bottom_p_or_t = 0
# In this example there is no increase of the wellbore pressure
# due to gravity:
unit_weight = '0 0 0'
# PeacemanBoreholes should almost always have use_mobility = true
use_mobility = true
# This is a production wellbore (a sink of fluid that removes fluid from porespace)
character = 1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
indirect_dependencies = 'fluid_mass1 fluid_mass0 bh_report'
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
expression = abs((a-c+d)/2/(a+c))
symbol_names = 'a c d'
symbol_values = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
[Outputs]
file_base = bh02
exodus = false
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/test/tests/dirackernels/bh_except03.i)
# PorousFlowPeacemanBorehole exception test
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = TimeDerivative
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
at_nodes = true # Needed to force expected error
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
bottom_p_or_t = 0
fluid_phase = 0
point_file = bh02.bh
SumQuantityUO = borehole_total_outflow_mass
variable = pp
unit_weight = '0 0 0'
character = 1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
expression = abs((a-c+d)/2/(a+c))
symbol_names = 'a c d'
symbol_values = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
(modules/porous_flow/test/tests/jacobian/basic_advection4.i)
# Basic advection with 1 porepressure and temperature as PorousFlow variables
# Constant permeability
[Mesh]
type = GeneratedMesh
dim = 1
nx = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[u]
[]
[T]
[]
[P]
[]
[]
[ICs]
[P]
type = RandomIC
variable = P
min = 2E5
max = 4E5
[]
[T]
type = RandomIC
variable = T
min = 300
max = 900
[]
[u]
type = RandomIC
variable = u
[]
[]
[Kernels]
[dummy_T]
type = NullKernel
variable = T
[]
[dummy_P]
type = NullKernel
variable = P
[]
[u_advection]
type = PorousFlowBasicAdvection
variable = u
phase = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'P T'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1E-5
m = 0.6
sat_lr = 0.1
[]
[]
[FluidProperties]
[methane]
type = MethaneFluidProperties
[]
[]
[Materials]
[temperature_qp]
type = PorousFlowTemperature
temperature = T
[]
[ppss_qp]
type = PorousFlow1PhaseP
porepressure = P
capillary_pressure = pc
[]
[fluid_qp]
type = PorousFlowSingleComponentFluid
fp = methane
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '5 0 0 0 5 0 0 0 5'
[]
[relperm_qp]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.1
sum_s_res = 0.1
[]
[darcy_velocity_qp]
type = PorousFlowDarcyVelocityMaterial
gravity = '0.25 0 0'
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
#petsc_options = '-snes_test_display'
petsc_options_iname = '-snes_type'
petsc_options_value = ' test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1
[]
(modules/porous_flow/test/tests/flux_limited_TVD_pflow/except03.i)
# Exception test: fe_family specified but not fe_order
[Mesh]
type = GeneratedMesh
dim = 1
[]
[GlobalParams]
gravity = '1 2 3'
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[tracer]
[]
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
[]
[]
[PorousFlowUnsaturated]
porepressure = pp
mass_fraction_vars = tracer
fp = the_simple_fluid
[]
[UserObjects]
[advective_flux_calculator]
type = PorousFlowAdvectiveFluxCalculatorSaturated
fe_family = Lagrange
[]
[]
[Materials]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[]
[Executioner]
type = Steady
solve_type = Newton
[]
(modules/porous_flow/test/tests/jacobian/fv_mass_flux.i)
# Verify Jacobian of FV advective flux and mass time derivative kernels
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
family = MONOMIAL
order = CONSTANT
fv = true
[]
[]
[FVKernels]
[mass0]
type = FVPorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[flux]
type = FVPorousFlowAdvectiveFlux
variable = pp
gravity = '0 -10 0'
fluid_component = 0
[]
[]
[ICs]
[pp]
type = RandomIC
variable = pp
min = 1e6
max = 2e6
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-5
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[]
[Materials]
[temperature]
type = ADPorousFlowTemperature
temperature = 293
[]
[ppss]
type = ADPorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = ADPorousFlowMassFraction
[]
[simple_fluid]
type = ADPorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = ADPorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = ADPorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[relperm]
type = ADPorousFlowRelativePermeabilityConst
kr = 1
phase = 0
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
(modules/porous_flow/test/tests/hysteresis/relperm_jac.i)
# Test of derivatives computed in PorousFlowHystereticRelativePermeability classes along zeroth-order curve
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '-1 0 0'
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
number_fluid_phases = 2
number_fluid_components = 2
porous_flow_vars = 'pp0 sat1'
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 10.0
m = 0.33
[]
[]
[Variables]
[pp0]
[]
[sat1]
initial_condition = 0.5
[]
[]
[Kernels]
[mass_conservation0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp0
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp0
[]
[mass_conservation1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sat1
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = sat1
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[]
[FluidProperties]
[simple_fluid_0]
type = SimpleFluidProperties
bulk_modulus = 10
viscosity = 1
[]
[simple_fluid_1]
type = SimpleFluidProperties
bulk_modulus = 1
viscosity = 3
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[temperature]
type = PorousFlowTemperature
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid_0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid_1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 1 0 0 0 1'
[]
[pc_calculator]
type = PorousFlow2PhasePS
capillary_pressure = pc
phase0_porepressure = pp0
phase1_saturation = sat1
[]
[hys_order_material]
type = PorousFlowHysteresisOrder
[]
[relperm_liquid]
type = PorousFlowHystereticRelativePermeabilityLiquid
phase = 0
S_lr = 0.1
S_gr_max = 0.2
m = 0.9
liquid_modification_range = 0.9
[]
[relperm_gas]
type = PorousFlowHystereticRelativePermeabilityGas
phase = 1
S_lr = 0.1
S_gr_max = 0.2
m = 0.9
gamma = 0.33
k_rg_max = 0.8
gas_low_extension_type = linear_like
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options = '-snes_check_jacobian'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
(modules/porous_flow/examples/coal_mining/fine_with_fluid.i)
#################################################################
#
# NOTE:
# The mesh for this model is too large for the MOOSE repository
# so is kept in the the large_media submodule
#
#################################################################
#
# Strata deformation and fluid flow aaround a coal mine - 3D model
#
# A "half model" is used. The mine is 400m deep and
# just the roof is studied (-400<=z<=0). The mining panel
# sits between 0<=x<=150, and 0<=y<=1000, so this simulates
# a coal panel that is 300m wide and 1000m long. The outer boundaries
# are 1km from the excavation boundaries.
#
# The excavation takes 0.5 years.
#
# The boundary conditions for this simulation are:
# - disp_x = 0 at x=0 and x=1150
# - disp_y = 0 at y=-1000 and y=1000
# - disp_z = 0 at z=-400, but there is a time-dependent
# Young modulus that simulates excavation
# - wc_x = 0 at y=-1000 and y=1000
# - wc_y = 0 at x=0 and x=1150
# - no flow at x=0, z=-400 and z=0
# - fixed porepressure at y=-1000, y=1000 and x=1150
# That is, rollers on the sides, free at top,
# and prescribed at bottom in the unexcavated portion.
#
# A single-phase unsaturated fluid is used.
#
# The small strain formulation is used.
#
# All stresses are measured in MPa, and time units are measured in years.
#
# The initial porepressure is hydrostatic with P=0 at z=0, so
# Porepressure ~ - 0.01*z MPa, where the fluid has density 1E3 kg/m^3 and
# gravity = = 10 m.s^-2 = 1E-5 MPa m^2/kg.
# To be more accurate, i use
# Porepressure = -bulk * log(1 + g*rho0*z/bulk)
# where bulk=2E3 MPa and rho0=1Ee kg/m^3.
# The initial stress is consistent with the weight force from undrained
# density 2500 kg/m^3, and fluid porepressure, and a Biot coefficient of 0.7, ie,
# stress_zz^effective = 0.025*z + 0.7 * initial_porepressure
# The maximum and minimum principal horizontal effective stresses are
# assumed to be equal to 0.8*stress_zz.
#
# Material properties:
# Young's modulus = 8 GPa
# Poisson's ratio = 0.25
# Cosserat layer thickness = 1 m
# Cosserat-joint normal stiffness = large
# Cosserat-joint shear stiffness = 1 GPa
# MC cohesion = 2 MPa
# MC friction angle = 35 deg
# MC dilation angle = 8 deg
# MC tensile strength = 1 MPa
# MC compressive strength = 100 MPa
# WeakPlane cohesion = 0.1 MPa
# WeakPlane friction angle = 30 deg
# WeakPlane dilation angle = 10 deg
# WeakPlane tensile strength = 0.1 MPa
# WeakPlane compressive strength = 100 MPa softening to 1 MPa at strain = 1
# Fluid density at zero porepressure = 1E3 kg/m^3
# Fluid bulk modulus = 2E3 MPa
# Fluid viscosity = 1.1E-3 Pa.s = 1.1E-9 MPa.s = 3.5E-17 MPa.year
#
[GlobalParams]
perform_finite_strain_rotations = false
displacements = 'disp_x disp_y disp_z'
Cosserat_rotations = 'wc_x wc_y wc_z'
PorousFlowDictator = dictator
biot_coefficient = 0.7
[]
[Mesh]
[file]
type = FileMeshGenerator
file = fine.e
[]
[xmin]
type = SideSetsAroundSubdomainGenerator
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30'
new_boundary = xmin
normal = '-1 0 0'
input = file
[]
[xmax]
type = SideSetsAroundSubdomainGenerator
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30'
new_boundary = xmax
normal = '1 0 0'
input = xmin
[]
[ymin]
type = SideSetsAroundSubdomainGenerator
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30'
new_boundary = ymin
normal = '0 -1 0'
input = xmax
[]
[ymax]
type = SideSetsAroundSubdomainGenerator
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30'
new_boundary = ymax
normal = '0 1 0'
input = ymin
[]
[zmax]
type = SideSetsAroundSubdomainGenerator
block = 30
new_boundary = zmax
normal = '0 0 1'
input = ymax
[]
[zmin]
type = SideSetsAroundSubdomainGenerator
block = 2
new_boundary = zmin
normal = '0 0 -1'
input = zmax
[]
[excav]
type = SubdomainBoundingBoxGenerator
input = zmin
block_id = 1
bottom_left = '0 0 -400'
top_right = '150 1000 -397'
[]
[roof]
type = SideSetsBetweenSubdomainsGenerator
primary_block = 3
paired_block = 1
input = excav
new_boundary = roof
[]
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[wc_x]
[]
[wc_y]
[]
[porepressure]
scaling = 1E-5
[]
[]
[ICs]
[porepressure]
type = FunctionIC
variable = porepressure
function = ini_pp
[]
[]
[Kernels]
[cx_elastic]
type = CosseratStressDivergenceTensors
use_displaced_mesh = false
variable = disp_x
component = 0
[]
[cy_elastic]
type = CosseratStressDivergenceTensors
use_displaced_mesh = false
variable = disp_y
component = 1
[]
[cz_elastic]
type = CosseratStressDivergenceTensors
use_displaced_mesh = false
variable = disp_z
component = 2
[]
[x_couple]
type = StressDivergenceTensors
use_displaced_mesh = false
variable = wc_x
displacements = 'wc_x wc_y wc_z'
component = 0
base_name = couple
[]
[y_couple]
type = StressDivergenceTensors
use_displaced_mesh = false
variable = wc_y
displacements = 'wc_x wc_y wc_z'
component = 1
base_name = couple
[]
[x_moment]
type = MomentBalancing
use_displaced_mesh = false
variable = wc_x
component = 0
[]
[y_moment]
type = MomentBalancing
use_displaced_mesh = false
variable = wc_y
component = 1
[]
[gravity]
type = Gravity
use_displaced_mesh = false
variable = disp_z
value = -10E-6 # remember this is in MPa
[]
[poro_x]
type = PorousFlowEffectiveStressCoupling
use_displaced_mesh = false
variable = disp_x
component = 0
[]
[poro_y]
type = PorousFlowEffectiveStressCoupling
use_displaced_mesh = false
variable = disp_y
component = 1
[]
[poro_z]
type = PorousFlowEffectiveStressCoupling
use_displaced_mesh = false
component = 2
variable = disp_z
[]
[poro_vol_exp]
type = PorousFlowMassVolumetricExpansion
use_displaced_mesh = false
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30'
variable = porepressure
fluid_component = 0
[]
[mass0]
type = PorousFlowMassTimeDerivative
use_displaced_mesh = false
fluid_component = 0
variable = porepressure
[]
[flux]
type = PorousFlowAdvectiveFlux
use_displaced_mesh = false
variable = porepressure
gravity = '0 0 -10E-6'
fluid_component = 0
[]
[]
[AuxVariables]
[saturation]
order = CONSTANT
family = MONOMIAL
[]
[darcy_x]
order = CONSTANT
family = MONOMIAL
[]
[darcy_y]
order = CONSTANT
family = MONOMIAL
[]
[darcy_z]
order = CONSTANT
family = MONOMIAL
[]
[porosity]
order = CONSTANT
family = MONOMIAL
[]
[wc_z]
[]
[stress_xx]
order = CONSTANT
family = MONOMIAL
[]
[stress_xy]
order = CONSTANT
family = MONOMIAL
[]
[stress_xz]
order = CONSTANT
family = MONOMIAL
[]
[stress_yx]
order = CONSTANT
family = MONOMIAL
[]
[stress_yy]
order = CONSTANT
family = MONOMIAL
[]
[stress_yz]
order = CONSTANT
family = MONOMIAL
[]
[stress_zx]
order = CONSTANT
family = MONOMIAL
[]
[stress_zy]
order = CONSTANT
family = MONOMIAL
[]
[stress_zz]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_xx]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_xy]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_xz]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_yx]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_yy]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_yz]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_zx]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_zy]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_zz]
order = CONSTANT
family = MONOMIAL
[]
[perm_xx]
order = CONSTANT
family = MONOMIAL
[]
[perm_yy]
order = CONSTANT
family = MONOMIAL
[]
[perm_zz]
order = CONSTANT
family = MONOMIAL
[]
[mc_shear]
order = CONSTANT
family = MONOMIAL
[]
[mc_tensile]
order = CONSTANT
family = MONOMIAL
[]
[wp_shear]
order = CONSTANT
family = MONOMIAL
[]
[wp_tensile]
order = CONSTANT
family = MONOMIAL
[]
[wp_shear_f]
order = CONSTANT
family = MONOMIAL
[]
[wp_tensile_f]
order = CONSTANT
family = MONOMIAL
[]
[mc_shear_f]
order = CONSTANT
family = MONOMIAL
[]
[mc_tensile_f]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[saturation_water]
type = PorousFlowPropertyAux
variable = saturation
property = saturation
phase = 0
execute_on = timestep_end
[]
[darcy_x]
type = PorousFlowDarcyVelocityComponent
variable = darcy_x
gravity = '0 0 -10E-6'
component = x
[]
[darcy_y]
type = PorousFlowDarcyVelocityComponent
variable = darcy_y
gravity = '0 0 -10E-6'
component = y
[]
[darcy_z]
type = PorousFlowDarcyVelocityComponent
variable = darcy_z
gravity = '0 0 -10E-6'
component = z
[]
[porosity]
type = PorousFlowPropertyAux
property = porosity
variable = porosity
execute_on = timestep_end
[]
[stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[]
[stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[]
[stress_xz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xz
index_i = 0
index_j = 2
execute_on = timestep_end
[]
[stress_yx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yx
index_i = 1
index_j = 0
execute_on = timestep_end
[]
[stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[]
[stress_yz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yz
index_i = 1
index_j = 2
execute_on = timestep_end
[]
[stress_zx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zx
index_i = 2
index_j = 0
execute_on = timestep_end
[]
[stress_zy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zy
index_i = 2
index_j = 1
execute_on = timestep_end
[]
[stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[]
[total_strain_xx]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[]
[total_strain_xy]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[]
[total_strain_xz]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_xz
index_i = 0
index_j = 2
execute_on = timestep_end
[]
[total_strain_yx]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_yx
index_i = 1
index_j = 0
execute_on = timestep_end
[]
[total_strain_yy]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[]
[total_strain_yz]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_yz
index_i = 1
index_j = 2
execute_on = timestep_end
[]
[total_strain_zx]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_zx
index_i = 2
index_j = 0
execute_on = timestep_end
[]
[total_strain_zy]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_zy
index_i = 2
index_j = 1
execute_on = timestep_end
[]
[total_strain_zz]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[]
[perm_xx]
type = PorousFlowPropertyAux
property = permeability
variable = perm_xx
row = 0
column = 0
execute_on = timestep_end
[]
[perm_yy]
type = PorousFlowPropertyAux
property = permeability
variable = perm_yy
row = 1
column = 1
execute_on = timestep_end
[]
[perm_zz]
type = PorousFlowPropertyAux
property = permeability
variable = perm_zz
row = 2
column = 2
execute_on = timestep_end
[]
[mc_shear]
type = MaterialStdVectorAux
index = 0
property = mc_plastic_internal_parameter
variable = mc_shear
execute_on = timestep_end
[]
[mc_tensile]
type = MaterialStdVectorAux
index = 1
property = mc_plastic_internal_parameter
variable = mc_tensile
execute_on = timestep_end
[]
[wp_shear]
type = MaterialStdVectorAux
index = 0
property = wp_plastic_internal_parameter
variable = wp_shear
execute_on = timestep_end
[]
[wp_tensile]
type = MaterialStdVectorAux
index = 1
property = wp_plastic_internal_parameter
variable = wp_tensile
execute_on = timestep_end
[]
[mc_shear_f]
type = MaterialStdVectorAux
index = 6
property = mc_plastic_yield_function
variable = mc_shear_f
execute_on = timestep_end
[]
[mc_tensile_f]
type = MaterialStdVectorAux
index = 0
property = mc_plastic_yield_function
variable = mc_tensile_f
execute_on = timestep_end
[]
[wp_shear_f]
type = MaterialStdVectorAux
index = 0
property = wp_plastic_yield_function
variable = wp_shear_f
execute_on = timestep_end
[]
[wp_tensile_f]
type = MaterialStdVectorAux
index = 1
property = wp_plastic_yield_function
variable = wp_tensile_f
execute_on = timestep_end
[]
[]
[BCs]
[no_x]
type = DirichletBC
variable = disp_x
boundary = 'xmin xmax'
value = 0.0
[]
[no_y]
type = DirichletBC
variable = disp_y
boundary = 'ymin ymax'
value = 0.0
[]
[no_z]
type = DirichletBC
variable = disp_z
boundary = zmin
value = 0.0
[]
[no_wc_x]
type = DirichletBC
variable = wc_x
boundary = 'ymin ymax'
value = 0.0
[]
[no_wc_y]
type = DirichletBC
variable = wc_y
boundary = 'xmin xmax'
value = 0.0
[]
[fix_porepressure]
type = FunctionDirichletBC
variable = porepressure
boundary = 'ymin ymax xmax'
function = ini_pp
[]
[roof_porepressure]
type = PorousFlowPiecewiseLinearSink
variable = porepressure
pt_vals = '-1E3 1E3'
multipliers = '-1 1'
fluid_phase = 0
flux_function = roof_conductance
boundary = roof
[]
[roof]
type = StickyBC
variable = disp_z
min_value = -3.0
boundary = roof
[]
[]
[Functions]
[ini_pp]
type = ParsedFunction
symbol_names = 'bulk p0 g rho0'
symbol_values = '2E3 0.0 1E-5 1E3'
expression = '-bulk*log(exp(-p0/bulk)+g*rho0*z/bulk)'
[]
[ini_xx]
type = ParsedFunction
symbol_names = 'bulk p0 g rho0 biot'
symbol_values = '2E3 0.0 1E-5 1E3 0.7'
expression = '0.8*(2500*10E-6*z+biot*(-bulk*log(exp(-p0/bulk)+g*rho0*z/bulk)))'
[]
[ini_zz]
type = ParsedFunction
symbol_names = 'bulk p0 g rho0 biot'
symbol_values = '2E3 0.0 1E-5 1E3 0.7'
expression = '2500*10E-6*z+biot*(-bulk*log(exp(-p0/bulk)+g*rho0*z/bulk))'
[]
[excav_sideways]
type = ParsedFunction
symbol_names = 'end_t ymin ymax minval maxval slope'
symbol_values = '0.5 0 1000.0 1E-9 1 10'
# excavation face at ymin+(ymax-ymin)*min(t/end_t,1)
# slope is the distance over which the modulus reduces from maxval to minval
expression = 'if(y<ymin+(ymax-ymin)*min(t/end_t,1),minval,if(y<ymin+(ymax-ymin)*min(t/end_t,1)+slope,minval+(maxval-minval)*(y-(ymin+(ymax-ymin)*min(t/end_t,1)))/slope,maxval))'
[]
[density_sideways]
type = ParsedFunction
symbol_names = 'end_t ymin ymax minval maxval'
symbol_values = '0.5 0 1000.0 0 2500'
expression = 'if(y<ymin+(ymax-ymin)*min(t/end_t,1),minval,maxval)'
[]
[roof_conductance]
type = ParsedFunction
symbol_names = 'end_t ymin ymax maxval minval'
symbol_values = '0.5 0 1000.0 1E7 0'
expression = 'if(y<ymin+(ymax-ymin)*min(t/end_t,1),maxval,minval)'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure disp_x disp_y disp_z'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1 # MPa^-1
[]
[mc_coh_strong_harden]
type = TensorMechanicsHardeningExponential
value_0 = 1.99 # MPa
value_residual = 2.01 # MPa
rate = 1.0
[]
[mc_fric]
type = TensorMechanicsHardeningConstant
value = 0.61 # 35deg
[]
[mc_dil]
type = TensorMechanicsHardeningConstant
value = 0.15 # 8deg
[]
[mc_tensile_str_strong_harden]
type = TensorMechanicsHardeningExponential
value_0 = 1.0 # MPa
value_residual = 1.0 # MPa
rate = 1.0
[]
[mc_compressive_str]
type = TensorMechanicsHardeningCubic
value_0 = 100 # Large!
value_residual = 100
internal_limit = 0.1
[]
[wp_coh_harden]
type = TensorMechanicsHardeningCubic
value_0 = 0.05
value_residual = 0.05
internal_limit = 10
[]
[wp_tan_fric]
type = TensorMechanicsHardeningConstant
value = 0.26 # 15deg
[]
[wp_tan_dil]
type = TensorMechanicsHardeningConstant
value = 0.18 # 10deg
[]
[wp_tensile_str_harden]
type = TensorMechanicsHardeningCubic
value_0 = 0.05
value_residual = 0.05
internal_limit = 10
[]
[wp_compressive_str_soften]
type = TensorMechanicsHardeningCubic
value_0 = 100
value_residual = 1
internal_limit = 1.0
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2E3
density0 = 1000
thermal_expansion = 0
viscosity = 3.5E-17
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = porepressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity_for_aux]
type = PorousFlowPorosity
at_nodes = false
fluid = true
mechanical = true
ensure_positive = true
porosity_zero = 0.02
solid_bulk = 5.3333E3
[]
[porosity_bulk]
type = PorousFlowPorosity
fluid = true
mechanical = true
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30'
ensure_positive = true
porosity_zero = 0.02
solid_bulk = 5.3333E3
[]
[porosity_excav]
type = PorousFlowPorosityConst
block = 1
porosity = 1.0
[]
[permeability_bulk]
type = PorousFlowPermeabilityKozenyCarman
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30'
poroperm_function = kozeny_carman_phi0
k0 = 1E-15
phi0 = 0.02
n = 2
m = 2
[]
[permeability_excav]
type = PorousFlowPermeabilityConst
block = 1
permeability = '0 0 0 0 0 0 0 0 0'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 4
s_res = 0.4
sum_s_res = 0.4
phase = 0
[]
[elasticity_tensor_0]
type = ComputeLayeredCosseratElasticityTensor
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30'
young = 8E3 # MPa
poisson = 0.25
layer_thickness = 1.0
joint_normal_stiffness = 1E9 # huge
joint_shear_stiffness = 1E3 # MPa
[]
[elasticity_tensor_1]
type = ComputeLayeredCosseratElasticityTensor
block = 1
young = 8E3 # MPa
poisson = 0.25
layer_thickness = 1.0
joint_normal_stiffness = 1E9 # huge
joint_shear_stiffness = 1E3 # MPa
elasticity_tensor_prefactor = excav_sideways
[]
[strain]
type = ComputeCosseratIncrementalSmallStrain
eigenstrain_names = ini_stress
[]
[ini_stress]
type = ComputeEigenstrainFromInitialStress
eigenstrain_name = ini_stress
initial_stress = 'ini_xx 0 0 0 ini_xx 0 0 0 ini_zz'
[]
[stress_0]
type = ComputeMultipleInelasticCosseratStress
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30'
inelastic_models = 'mc wp'
cycle_models = true
relative_tolerance = 2.0
absolute_tolerance = 1E6
max_iterations = 1
tangent_operator = nonlinear
perform_finite_strain_rotations = false
[]
[stress_1]
type = ComputeMultipleInelasticCosseratStress
block = 1
inelastic_models = ''
relative_tolerance = 2.0
absolute_tolerance = 1E6
max_iterations = 1
tangent_operator = nonlinear
perform_finite_strain_rotations = false
[]
[mc]
type = CappedMohrCoulombCosseratStressUpdate
warn_about_precision_loss = false
host_youngs_modulus = 8E3
host_poissons_ratio = 0.25
base_name = mc
tensile_strength = mc_tensile_str_strong_harden
compressive_strength = mc_compressive_str
cohesion = mc_coh_strong_harden
friction_angle = mc_fric
dilation_angle = mc_dil
max_NR_iterations = 100000
smoothing_tol = 0.1 # MPa # Must be linked to cohesion
yield_function_tol = 1E-9 # MPa. this is essentially the lowest possible without lots of precision loss
perfect_guess = true
min_step_size = 1.0
[]
[wp]
type = CappedWeakPlaneCosseratStressUpdate
warn_about_precision_loss = false
base_name = wp
cohesion = wp_coh_harden
tan_friction_angle = wp_tan_fric
tan_dilation_angle = wp_tan_dil
tensile_strength = wp_tensile_str_harden
compressive_strength = wp_compressive_str_soften
max_NR_iterations = 10000
tip_smoother = 0.05
smoothing_tol = 0.05 # MPa # Note, this must be tied to cohesion, otherwise get no possible return at cone apex
yield_function_tol = 1E-11 # MPa. this is essentially the lowest possible without lots of precision loss
perfect_guess = true
min_step_size = 1.0E-3
[]
[undrained_density_0]
type = GenericConstantMaterial
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30'
prop_names = density
prop_values = 2500
[]
[undrained_density_1]
type = GenericFunctionMaterial
block = 1
prop_names = density
prop_values = density_sideways
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Postprocessors]
[min_roof_disp]
type = NodalExtremeValue
boundary = roof
value_type = min
variable = disp_z
[]
[min_roof_pp]
type = NodalExtremeValue
boundary = roof
value_type = min
variable = porepressure
[]
[min_surface_disp]
type = NodalExtremeValue
boundary = zmax
value_type = min
variable = disp_z
[]
[min_surface_pp]
type = NodalExtremeValue
boundary = zmax
value_type = min
variable = porepressure
[]
[max_perm_zz]
type = ElementExtremeValue
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30'
variable = perm_zz
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options = '-snes_converged_reason'
# best overall
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu mumps'
# best if you don't have mumps:
#petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
#petsc_options_value = ' asm 2 lu gmres 200'
# very basic:
#petsc_options_iname = '-pc_type -ksp_type -ksp_gmres_restart'
#petsc_options_value = ' bjacobi gmres 200'
line_search = bt
nl_abs_tol = 1e-3
nl_rel_tol = 1e-5
l_max_its = 200
nl_max_its = 30
start_time = 0.0
dt = 0.0025
end_time = 0.5
[]
[Outputs]
time_step_interval = 1
print_linear_residuals = true
exodus = true
csv = true
console = true
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d.i)
# Pressure pulse in 1D with 1 phase - transient
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 2E6
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = pp
gravity = '0 0 0'
fluid_component = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-15'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0
phase = 0
[]
[]
[BCs]
[left]
type = DirichletBC
boundary = left
value = 3E6
variable = pp
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-20 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E3
end_time = 1E4
[]
[Postprocessors]
[p000]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = 'initial timestep_end'
[]
[p010]
type = PointValue
variable = pp
point = '10 0 0'
execute_on = 'initial timestep_end'
[]
[p020]
type = PointValue
variable = pp
point = '20 0 0'
execute_on = 'initial timestep_end'
[]
[p030]
type = PointValue
variable = pp
point = '30 0 0'
execute_on = 'initial timestep_end'
[]
[p040]
type = PointValue
variable = pp
point = '40 0 0'
execute_on = 'initial timestep_end'
[]
[p050]
type = PointValue
variable = pp
point = '50 0 0'
execute_on = 'initial timestep_end'
[]
[p060]
type = PointValue
variable = pp
point = '60 0 0'
execute_on = 'initial timestep_end'
[]
[p070]
type = PointValue
variable = pp
point = '70 0 0'
execute_on = 'initial timestep_end'
[]
[p080]
type = PointValue
variable = pp
point = '80 0 0'
execute_on = 'initial timestep_end'
[]
[p090]
type = PointValue
variable = pp
point = '90 0 0'
execute_on = 'initial timestep_end'
[]
[p100]
type = PointValue
variable = pp
point = '100 0 0'
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
file_base = pressure_pulse_1d
print_linear_residuals = false
csv = true
[]
(modules/porous_flow/test/tests/infiltration_and_drainage/bw02.i)
[Mesh]
type = GeneratedMesh
dim = 2
nx = 200
ny = 1
xmin = -10
xmax = 10
ymin = 0
ymax = 0.05
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Functions]
[dts]
type = PiecewiseLinear
y = '1E-1 5E-1 5E-1'
x = '0 1 10'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = pressure
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureBW
Sn = 0.0
Ss = 1.0
C = 1.5
las = 2
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 4
density0 = 10
thermal_expansion = 0
[]
[]
[Materials]
[massfrac]
type = PorousFlowMassFraction
[]
[temperature]
type = PorousFlowTemperature
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pressure
capillary_pressure = pc
[]
[relperm]
type = PorousFlowRelativePermeabilityBW
Sn = 0.0
Ss = 1.0
Kn = 0
Ks = 1
C = 1.5
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.25
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 1 0 0 0 1'
[]
[]
[Variables]
[pressure]
initial_condition = -9E2
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pressure
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pressure
gravity = '-0.1 0 0'
[]
[]
[AuxVariables]
[SWater]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[SWater]
type = MaterialStdVectorAux
property = PorousFlow_saturation_qp
index = 0
variable = SWater
[]
[]
[BCs]
[recharge]
type = PorousFlowSink
variable = pressure
boundary = right
flux_function = -1.25 # corresponds to Rstar being 0.5 because i have to multiply by density*porosity
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu NONZERO 2 1E-10 1E-10 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
petsc_options = '-snes_converged_reason'
end_time = 2
[TimeStepper]
type = FunctionDT
function = dts
[]
[]
[VectorPostprocessors]
[swater]
type = LineValueSampler
variable = SWater
start_point = '-10 0 0'
end_point = '10 0 0'
sort_by = x
num_points = 80
execute_on = timestep_end
[]
[]
[Outputs]
file_base = bw02
sync_times = '0.5 2 8'
[exodus]
type = Exodus
sync_only = true
[]
[along_line]
type = CSV
sync_only = true
[]
[]
(modules/porous_flow/test/tests/jacobian/fflux01.i)
# 1phase, 1component, constant viscosity, constant insitu permeability
# density with constant bulk, Corey relative perm, nonzero gravity, unsaturated with vanGenuchten
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = -0.7+x+y
[]
[]
[Kernels]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
gravity = '-1 -0.1 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/heat_advection/heat_advection_1d_fv.i)
# 1phase, heat advecting with a moving fluid using FV
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
nx = 50
xmin = 0
xmax = 1
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[temp]
type = MooseVariableFVReal
[]
[pp]
type = MooseVariableFVReal
[]
[]
[FVICs]
[pp]
type = FVFunctionIC
variable = pp
function = '1-x'
[]
[temp]
type = FVFunctionIC
variable = temp
function = 'if(x<0.02, 300, 200)'
[]
[]
[FVBCs]
[pp0]
type = FVDirichletBC
variable = pp
boundary = left
value = 1
[]
[pp1]
type = FVDirichletBC
variable = pp
boundary = right
value = 0
[]
[hot]
type = FVDirichletBC
variable = temp
boundary = left
value = 300
[]
[cold]
type = FVDirichletBC
variable = temp
boundary = right
value = 200
[]
[]
[FVKernels]
[mass_dot]
type = FVPorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[advection]
type = FVPorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
[]
[energy_dot]
type = FVPorousFlowEnergyTimeDerivative
variable = temp
[]
[heat_advection]
type = FVPorousFlowHeatAdvection
variable = temp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.6
alpha = 1.3
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 100
density0 = 1000
viscosity = 4.4
thermal_expansion = 0
cv = 2
[]
[]
[Materials]
[temperature]
type = ADPorousFlowTemperature
temperature = temp
[]
[porosity]
type = ADPorousFlowPorosityConst
porosity = 0.2
[]
[rock_heat]
type = ADPorousFlowMatrixInternalEnergy
specific_heat_capacity = 1.0
density = 125
[]
[simple_fluid]
type = ADPorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = ADPorousFlowPermeabilityConst
permeability = '1.1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = ADPorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[massfrac]
type = ADPorousFlowMassFraction
[]
[PS]
type = ADPorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 0.01
end_time = 0.6
[]
[VectorPostprocessors]
[T]
type = ElementValueSampler
sort_by = x
variable = 'temp'
[]
[]
[Outputs]
[csv]
type = CSV
execute_vector_postprocessors_on = final
[]
[]
(modules/porous_flow/test/tests/heat_advection/heat_advection_1d_fullsat.i)
# 1phase, heat advecting with a moving fluid
# Full upwinding is used, as implemented by the PorousFlowFullySaturatedUpwindHeatAdvection added
# In this case, the results should be identical to the case when the PorousFlowHeatAdvection Kernel is used.
[Mesh]
type = GeneratedMesh
dim = 1
nx = 50
xmin = 0
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[temp]
initial_condition = 200
[]
[pp]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = '1-x'
[]
[]
[BCs]
[pp0]
type = DirichletBC
variable = pp
boundary = left
value = 1
[]
[pp1]
type = DirichletBC
variable = pp
boundary = right
value = 0
[]
[spit_heat]
type = DirichletBC
variable = temp
boundary = left
value = 300
[]
[suck_heat]
type = DirichletBC
variable = temp
boundary = right
value = 200
[]
[]
[Kernels]
[mass_dot]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[advection]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
[]
[energy_dot]
type = PorousFlowEnergyTimeDerivative
variable = temp
[]
[heat_advection]
type = PorousFlowFullySaturatedUpwindHeatAdvection
variable = temp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.6
alpha = 1.3
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 100
density0 = 1000
viscosity = 4.4
thermal_expansion = 0
cv = 2
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1.0
density = 125
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[massfrac]
type = PorousFlowMassFraction
[]
[PS]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres bjacobi 1E-15 1E-10 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 0.01
end_time = 0.6
[]
[VectorPostprocessors]
[T]
type = LineValueSampler
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 51
sort_by = x
variable = temp
[]
[]
[Outputs]
[csv]
type = CSV
sync_times = '0.1 0.6'
sync_only = true
[]
[]
(modules/porous_flow/test/tests/dirackernels/bh05.i)
# unsaturated
# injection
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Functions]
[dts]
type = PiecewiseLinear
y = '500 500 1E1'
x = '4000 5000 6500'
[]
[]
[Variables]
[pp]
initial_condition = -2E5
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.8
alpha = 1e-5
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[relperm]
type = PorousFlowRelativePermeabilityFLAC
m = 2
phase = 0
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
variable = pp
SumQuantityUO = borehole_total_outflow_mass
point_file = bh03.bh
fluid_phase = 0
bottom_p_or_t = 0
unit_weight = '0 0 0'
use_mobility = true
character = -1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
indirect_dependencies = 'fluid_mass1 fluid_mass0 bh_report'
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
expression = abs((a-c+d)/2/(a+c))
symbol_names = 'a c d'
symbol_values = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 6500
solve_type = NEWTON
[TimeStepper]
type = FunctionDT
function = dts
[]
[]
[Outputs]
file_base = bh05
exodus = false
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/test/tests/thm_rehbinder/free_outer.i)
[Mesh]
[annular]
type = AnnularMeshGenerator
nr = 40
nt = 16
rmin = 0.1
rmax = 1
dmin = 0.0
dmax = 90
growth_r = 1.1
[]
[make3D]
input = annular
type = MeshExtruderGenerator
bottom_sideset = bottom
top_sideset = top
extrusion_vector = '0 0 1'
num_layers = 1
[]
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
PorousFlowDictator = dictator
biot_coefficient = 1.0
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[porepressure]
[]
[temperature]
[]
[]
[BCs]
# sideset 1 = outer
# sideset 2 = cavity
# sideset 3 = ymin
# sideset 4 = xmin
[plane_strain]
type = DirichletBC
variable = disp_z
value = 0
boundary = 'top bottom'
[]
[ymin]
type = DirichletBC
variable = disp_y
value = 0
boundary = dmin
[]
[xmin]
type = DirichletBC
variable = disp_x
value = 0
boundary = dmax
[]
[cavity_temperature]
type = DirichletBC
variable = temperature
value = 1000
boundary = rmin
[]
[cavity_porepressure]
type = DirichletBC
variable = porepressure
value = 1E6
boundary = rmin
[]
[cavity_zero_effective_stress_x]
type = Pressure
variable = disp_x
function = 1E6
boundary = rmin
use_displaced_mesh = false
[]
[cavity_zero_effective_stress_y]
type = Pressure
variable = disp_y
function = 1E6
boundary = rmin
use_displaced_mesh = false
[]
[outer_temperature]
type = DirichletBC
variable = temperature
value = 0
boundary = rmax
[]
[outer_pressure]
type = DirichletBC
variable = porepressure
value = 0
boundary = rmax
[]
[]
[AuxVariables]
[stress_rr]
family = MONOMIAL
order = CONSTANT
[]
[stress_pp]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[stress_rr]
type = RankTwoScalarAux
rank_two_tensor = stress
variable = stress_rr
scalar_type = RadialStress
point1 = '0 0 0'
point2 = '0 0 1'
[]
[stress_pp]
type = RankTwoScalarAux
rank_two_tensor = stress
variable = stress_pp
scalar_type = HoopStress
point1 = '0 0 0'
point2 = '0 0 1'
[]
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
thermal_expansion = 0.0
bulk_modulus = 1E12
viscosity = 1.0E-3
density0 = 1000.0
cv = 1000.0
cp = 1000.0
porepressure_coefficient = 0.0
[]
[]
[PorousFlowBasicTHM]
coupling_type = ThermoHydroMechanical
multiply_by_density = false
add_stress_aux = true
porepressure = porepressure
temperature = temperature
eigenstrain_names = thermal_contribution
gravity = '0 0 0'
fp = the_simple_fluid
[]
[Materials]
[elasticity_tensor]
type = ComputeIsotropicElasticityTensor
youngs_modulus = 1E10
poissons_ratio = 0.2
[]
[strain]
type = ComputeSmallStrain
eigenstrain_names = thermal_contribution
[]
[thermal_contribution]
type = ComputeThermalExpansionEigenstrain
temperature = temperature
thermal_expansion_coeff = 1E-6
eigenstrain_name = thermal_contribution
stress_free_temperature = 0.0
[]
[stress]
type = ComputeLinearElasticStress
[]
[porosity]
type = PorousFlowPorosityConst # only the initial value of this is ever used
porosity = 0.1
[]
[biot_modulus]
type = PorousFlowConstantBiotModulus
solid_bulk_compliance = 1E-10
fluid_bulk_modulus = 1E12
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[thermal_expansion]
type = PorousFlowConstantThermalExpansionCoefficient
fluid_coefficient = 1E-6
drained_coefficient = 1E-6
[]
[thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '1E6 0 0 0 1E6 0 0 0 1E6'
[]
[]
[VectorPostprocessors]
[P]
type = LineValueSampler
start_point = '0.1 0 0'
end_point = '1.0 0 0'
num_points = 10
sort_by = x
variable = porepressure
[]
[T]
type = LineValueSampler
start_point = '0.1 0 0'
end_point = '1.0 0 0'
num_points = 10
sort_by = x
variable = temperature
[]
[U]
type = LineValueSampler
start_point = '0.1 0 0'
end_point = '1.0 0 0'
num_points = 10
sort_by = x
variable = disp_x
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_rtol'
petsc_options_value = 'gmres asm lu 1E-8'
[]
[]
[Executioner]
type = Steady
solve_type = Newton
[]
[Outputs]
file_base = free_outer
execute_on = timestep_end
csv = true
[]
(modules/porous_flow/test/tests/dirackernels/pls02.i)
# fully-saturated situation with a poly-line sink with use_mobility=true
# The poly-line consists of 2 points, and has a length
# of 0.5. Each point is weighted with a weight of 0.1
# The PorousFlowPolyLineSink has
# p_or_t_vals = 0 1E7
# fluxes = 0 1
# so that for 0<=porepressure<=1E7
# base flux = porepressure * 1E-6 * mobility (measured in kg.m^-1.s^-1),
# and when multiplied by the poly-line length, and
# the weighting of each point, the mass flux is
# flux = porepressure * 0.5*E-8 * mobility (kg.s^-1).
#
# The fluid and matrix properties are:
# porosity = 0.1
# element volume = 8 m^3
# density = dens0 * exp(P / bulk), with bulk = 2E7
# initial porepressure P0 = 1E7
# viscosity = 0.2
# So, fluid mass = 0.8 * density (kg)
#
# The equation to solve is
# d(Mass)/dt = - porepressure * 0.5*E-8 * density / viscosity
#
# PorousFlow discretises time to conserve mass, so to march
# forward in time, we must solve
# Mass(dt) = Mass(0) - P * 0.5E-8 * density / viscosity * dt
# or
# 0.8 * dens0 * exp(P/bulk) = 0.8 * dens0 * exp(P0/bulk) - P * 0.5E-8 * density / viscosity * dt
# For the numbers written above this gives
# P(t=1) = 6.36947 MPa
# which is given precisely by MOOSE
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[UserObjects]
[pls_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e7
viscosity = 0.2
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[DiracKernels]
[pls]
# This defines a sink that has strength
# f = L(P) * relperm * L_seg
# where
# L(P) is a piecewise-linear function of porepressure
# that is zero at pp=0 and 1 at pp=1E7
# relperm is the relative permeability of the fluid
# L_seg is the line-segment length associated with
# the Dirac points defined in the file pls02.bh
type = PorousFlowPolyLineSink
# Because the Variable for this Sink is pp, and pp is associated
# with the fluid-mass conservation equation, this sink is extracting
# fluid mass (and not heat energy or something else)
variable = pp
# The following specfies that the total fluid mass coming out of
# the porespace via this sink in this timestep should be recorded
# in the pls_total_outflow_mass UserObject
SumQuantityUO = pls_total_outflow_mass
# The following file defines the polyline geometry
# which is just two points in this particular example
point_file = pls02.bh
# Now define the piecewise-linear function, L
# First, we want L to be a function of porepressure (and not
# temperature or something else). The following means that
# p_or_t_vals should be intepreted by MOOSE as the zeroth-phase
# porepressure
function_of = pressure
fluid_phase = 0
# Second, define the piecewise-linear function, L
# The following means
# flux=0 when pp=0 (and also pp<0)
# flux=1 when pp=1E7 (and also pp>1E7)
# flux=linearly intepolated between pp=0 and pp=1E7
# When flux>0 this means a sink, while flux<0 means a source
p_or_t_vals = '0 1E7'
fluxes = '0 1'
# Finally, in this case we want to always multiply
# L by the fluid mobility (of the zeroth phase) and
# use that in the sink strength instead of the bare L
# computed above
use_mobility = true
[]
[]
[Postprocessors]
[pls_report]
type = PorousFlowPlotQuantity
uo = pls_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
indirect_dependencies = 'fluid_mass1 fluid_mass0 pls_report'
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
expression = abs((a-c+d)/2/(a+c))
symbol_names = 'a c d'
symbol_values = 'fluid_mass1 fluid_mass0 pls_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 1
dt = 1
solve_type = NEWTON
[]
[Outputs]
file_base = pls02
exodus = false
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/test/tests/energy_conservation/heat03_rz.i)
# The sample is a single unit element in RZ coordinates
# A constant velocity is applied to the outer boundary: disp_r = -0.01*t.
# There is no fluid flow or heat flow.
# Heat energy conservation is checked.
# Mass conservation is checked
[Mesh]
type = GeneratedMesh
dim = 2
nx = 1
ny = 1
xmin = 1
xmax = 2
ymin = -0.5
ymax = 0.5
coord_type = RZ
[]
[GlobalParams]
displacements = 'disp_r disp_z'
PorousFlowDictator = dictator
block = 0
biot_coefficient = 0.3
[]
[Variables]
[disp_r]
[]
[disp_z]
[]
[pp]
initial_condition = 0.1
[]
[temp]
initial_condition = 10
[]
[]
[BCs]
[plane_strain]
type = DirichletBC
variable = disp_z
value = 0
boundary = 'bottom top'
[]
[rmin_fixed]
type = DirichletBC
variable = disp_r
value = 0
boundary = left
[]
[contract]
type = FunctionDirichletBC
variable = disp_r
function = -0.01*t
boundary = right
[]
[]
[PorousFlowFullySaturated]
coupling_type = ThermoHydroMechanical
porepressure = pp
temperature = temp
fp = simple_fluid
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 1
viscosity = 1
thermal_expansion = 0
cv = 1.3
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '1 1.5'
# bulk modulus is lambda + 2*mu/3 = 1 + 2*1.5/3 = 2
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeAxisymmetricRZSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 2.2
density = 0.5
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0.5 0 0 0 0.5 0 0 0 0.5'
[]
[thermal_cond]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '1 0 0 0 1 0 0 0 1'
[]
[]
[Postprocessors]
[p0]
type = PointValue
outputs = 'console csv'
execute_on = 'initial timestep_end'
point = '1 0 0'
variable = pp
[]
[t0]
type = PointValue
outputs = 'console csv'
execute_on = 'initial timestep_end'
point = '1 0 0'
variable = temp
[]
[rdisp]
type = PointValue
outputs = 'csv console'
point = '2 0 0'
use_displaced_mesh = false
variable = disp_r
[]
[fluid_mass]
type = PorousFlowFluidMass
fluid_component = 0
execute_on = 'initial timestep_end'
outputs = 'console csv'
[]
[total_heat]
type = PorousFlowHeatEnergy
phase = 0
execute_on = 'initial timestep_end'
outputs = 'console csv'
[]
[rock_heat]
type = PorousFlowHeatEnergy
execute_on = 'initial timestep_end'
outputs = 'console csv'
[]
[fluid_heat]
type = PorousFlowHeatEnergy
include_porous_skeleton = false
phase = 0
execute_on = 'initial timestep_end'
outputs = 'console csv'
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 2
end_time = 10
[]
[Outputs]
execute_on = 'initial timestep_end'
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/hysteresis/hys_order_01.i)
# Test that PorousFlowHysteresisOrder correctly calculates hysteresis order
# Water is removed from the system (so order = 0) until saturation = S0
# Then, water is added to the system (so order = 1) until saturation = S1
# Then, water is removed from the system (so order = 2)
# More water is removed from the system so that the saturation < S0 (so order = 0)
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 0.0
[]
[]
[PorousFlowUnsaturated]
porepressure = pp
fp = simple_fluid
[]
[DiracKernels]
[source_sink_0]
type = PorousFlowPointSourceFromPostprocessor
point = '0 0 0'
mass_flux = sink_strength
variable = pp
[]
[source_sink_1]
type = PorousFlowPointSourceFromPostprocessor
point = '1 0 0'
mass_flux = sink_strength
variable = pp
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosityConst
porosity = 1.0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0 0 0 0 0 0 0 0 0'
[]
[hys_order]
type = PorousFlowHysteresisOrder
[]
[]
[AuxVariables]
[hys_order]
family = MONOMIAL
order = CONSTANT
[]
[tp0]
family = MONOMIAL
order = CONSTANT
[]
[tp1]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[hys_order]
type = PorousFlowPropertyAux
variable = hys_order
property = hysteresis_order
[]
[tp0]
type = PorousFlowPropertyAux
variable = tp0
property = hysteresis_saturation_turning_point
hysteresis_turning_point = 0
[]
[tp1]
type = PorousFlowPropertyAux
variable = tp1
property = hysteresis_saturation_turning_point
hysteresis_turning_point = 1
[]
[]
[Functions]
[sink_strength_fcn]
type = ParsedFunction
expression = '30 * if(t <= 4, -1, if(t <= 7, 1, -1))'
[]
[]
[Postprocessors]
[sink_strength]
type = FunctionValuePostprocessor
function = sink_strength_fcn
outputs = 'none'
[]
[saturation]
type = PointValue
point = '0 0 0'
variable = saturation0
[]
[hys_order]
type = PointValue
point = '0 0 0'
variable = hys_order
[]
[tp0]
type = PointValue
point = '0 0 0'
variable = tp0
[]
[tp1]
type = PointValue
point = '0 0 0'
variable = tp1
[]
[]
[Preconditioning]
[basic]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 13
nl_abs_tol = 1E-7
[]
[Outputs]
[csv]
type = CSV
sync_times = '0 1 5 6 7 8 9 10 11 13' # cut out t=12 because numerical roundoff might mean order is not reduced exactly at t=12
sync_only = true
[]
[]
(modules/porous_flow/test/tests/gravity/grav02b_fv.i)
# Checking that gravity head is established in the steady-state situation when 0<saturation<1 (note the strictly less-than).
# 2phase (PP), 2components, vanGenuchten, constant fluid bulk-moduli for each phase, constant viscosity, constant permeability, Corey relative perm
# For better agreement with the analytical solution (ana_pp), just increase nx
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = -1
xmax = 0
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
type = MooseVariableFVReal
initial_condition = -1.0
[]
[ppgas]
type = MooseVariableFVReal
initial_condition = 0
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
type = MooseVariableFVReal
initial_condition = 1
[]
[massfrac_ph1_sp0]
type = MooseVariableFVReal
initial_condition = 0
[]
[]
[FVKernels]
[flux0]
type = FVPorousFlowAdvectiveFlux
fluid_component = 0
variable = ppwater
gravity = '-1 0 0'
[]
[flux1]
type = FVPorousFlowAdvectiveFlux
fluid_component = 1
variable = ppgas
gravity = '-1 0 0'
[]
[]
[FVBCs]
[ppwater]
type = FVDirichletBC
boundary = right
variable = ppwater
value = -1
[]
[ppgas]
type = FVDirichletBC
boundary = right
variable = ppgas
value = 0
[]
[]
[Functions]
[ana_ppwater]
type = ParsedFunction
symbol_names = 'g B p0 rho0'
symbol_values = '1 2 pp_water_top 1'
expression = '-B*log(exp(-p0/B)+g*rho0*x/B)' # expected pp at base
[]
[ana_ppgas]
type = ParsedFunction
symbol_names = 'g B p0 rho0'
symbol_values = '1 1 pp_gas_top 0.1'
expression = '-B*log(exp(-p0/B)+g*rho0*x/B)' # expected pp at base
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2
density0 = 1
viscosity = 1
thermal_expansion = 0
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 0.1
viscosity = 0.5
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = ADPorousFlowTemperature
[]
[ppss]
type = ADPorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = ADPorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = ADPorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = ADPorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = ADPorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm_water]
type = ADPorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm_gas]
type = ADPorousFlowRelativePermeabilityCorey
n = 1
phase = 1
[]
[]
[Postprocessors]
[pp_water_top]
type = PointValue
variable = ppwater
point = '0 0 0'
[]
[pp_water_base]
type = PointValue
variable = ppwater
point = '-1 0 0'
[]
[pp_water_analytical]
type = FunctionValuePostprocessor
function = ana_ppwater
point = '-1 0 0'
[]
[pp_gas_top]
type = PointValue
variable = ppgas
point = '0 0 0'
[]
[pp_gas_base]
type = PointValue
variable = ppgas
point = '-1 0 0'
[]
[pp_gas_analytical]
type = FunctionValuePostprocessor
function = ana_ppgas
point = '-1 0 0'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Steady
solve_type = Newton
[]
[Outputs]
[csv]
type = CSV
[]
[]
(modules/combined/examples/geochem-porous_flow/geotes_2D/porous_flow.i)
# PorousFlow simulation of injection and production in a 2D aquifer
# Much of this file is standard porous-flow stuff. The unusual aspects are:
# - transfer of the rates of changes of each species (kg/s) to the aquifer_geochemistry.i simulation. This is achieved by saving these changes from the PorousFlowMassTimeDerivative residuals
# - transfer of the temperature field to the aquifer_geochemistry.i simulation
# Interesting behaviour can be simulated by this file without its "parent" simulation, exchanger.i. exchanger.i provides mass-fractions injected via the injection_rate_massfrac_* variables, but since these are more-or-less constant throughout the duration of the exchanger.i simulation, the initial_conditions specified below may be used. Similar, exchanger.i provides injection_temperature, but that is also constant.
injection_rate = -1.0 # kg/s/m, negative because injection as a source
production_rate = 1.0 # kg/s/m
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
nx = 14 # for better resolution, use 56 or 112
ny = 8 # for better resolution, use 32 or 64
xmin = -70
xmax = 70
ymin = -40
ymax = 40
[]
[injection_node]
input = gen
type = ExtraNodesetGenerator
new_boundary = injection_node
coord = '-30 0 0'
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[f0]
initial_condition = 0.002285946
[]
[f1]
initial_condition = 0.0035252
[]
[f2]
initial_condition = 1.3741E-05
[]
[porepressure]
initial_condition = 2E6
[]
[temperature]
initial_condition = 50
scaling = 1E-6 # fluid enthalpy is roughly 1E6
[]
[]
[BCs]
[injection_temperature]
type = MatchedValueBC
variable = temperature
v = injection_temperature
boundary = injection_node
[]
[]
[DiracKernels]
[inject_Na]
type = PorousFlowPolyLineSink
SumQuantityUO = injected_mass
fluxes = ${injection_rate}
p_or_t_vals = 0.0
line_length = 1.0
multiplying_var = injection_rate_massfrac_Na
point_file = injection.bh
variable = f0
[]
[inject_Cl]
type = PorousFlowPolyLineSink
SumQuantityUO = injected_mass
fluxes = ${injection_rate}
p_or_t_vals = 0.0
line_length = 1.0
multiplying_var = injection_rate_massfrac_Cl
point_file = injection.bh
variable = f1
[]
[inject_SiO2]
type = PorousFlowPolyLineSink
SumQuantityUO = injected_mass
fluxes = ${injection_rate}
p_or_t_vals = 0.0
line_length = 1.0
multiplying_var = injection_rate_massfrac_SiO2
point_file = injection.bh
variable = f2
[]
[inject_H2O]
type = PorousFlowPolyLineSink
SumQuantityUO = injected_mass
fluxes = ${injection_rate}
p_or_t_vals = 0.0
line_length = 1.0
multiplying_var = injection_rate_massfrac_H2O
point_file = injection.bh
variable = porepressure
[]
[produce_Na]
type = PorousFlowPolyLineSink
SumQuantityUO = produced_mass_Na
fluxes = ${production_rate}
p_or_t_vals = 0.0
line_length = 1.0
mass_fraction_component = 0
point_file = production.bh
variable = f0
[]
[produce_Cl]
type = PorousFlowPolyLineSink
SumQuantityUO = produced_mass_Cl
fluxes = ${production_rate}
p_or_t_vals = 0.0
line_length = 1.0
mass_fraction_component = 1
point_file = production.bh
variable = f1
[]
[produce_SiO2]
type = PorousFlowPolyLineSink
SumQuantityUO = produced_mass_SiO2
fluxes = ${production_rate}
p_or_t_vals = 0.0
line_length = 1.0
mass_fraction_component = 2
point_file = production.bh
variable = f2
[]
[produce_H2O]
type = PorousFlowPolyLineSink
SumQuantityUO = produced_mass_H2O
fluxes = ${production_rate}
p_or_t_vals = 0.0
line_length = 1.0
mass_fraction_component = 3
point_file = production.bh
variable = porepressure
[]
[produce_heat]
type = PorousFlowPolyLineSink
SumQuantityUO = produced_heat
fluxes = ${production_rate}
p_or_t_vals = 0.0
line_length = 1.0
use_enthalpy = true
point_file = production.bh
variable = temperature
[]
[]
[UserObjects]
[injected_mass]
type = PorousFlowSumQuantity
[]
[produced_mass_Na]
type = PorousFlowSumQuantity
[]
[produced_mass_Cl]
type = PorousFlowSumQuantity
[]
[produced_mass_SiO2]
type = PorousFlowSumQuantity
[]
[produced_mass_H2O]
type = PorousFlowSumQuantity
[]
[produced_heat]
type = PorousFlowSumQuantity
[]
[]
[Postprocessors]
[dt]
type = TimestepSize
execute_on = TIMESTEP_BEGIN
[]
[tot_kg_injected_this_timestep]
type = PorousFlowPlotQuantity
uo = injected_mass
[]
[kg_Na_produced_this_timestep]
type = PorousFlowPlotQuantity
uo = produced_mass_Na
[]
[kg_Cl_produced_this_timestep]
type = PorousFlowPlotQuantity
uo = produced_mass_Cl
[]
[kg_SiO2_produced_this_timestep]
type = PorousFlowPlotQuantity
uo = produced_mass_SiO2
[]
[kg_H2O_produced_this_timestep]
type = PorousFlowPlotQuantity
uo = produced_mass_H2O
[]
[mole_rate_Na_produced]
type = FunctionValuePostprocessor
function = moles_Na
indirect_dependencies = 'kg_Na_produced_this_timestep dt'
[]
[mole_rate_Cl_produced]
type = FunctionValuePostprocessor
function = moles_Cl
indirect_dependencies = 'kg_Cl_produced_this_timestep dt'
[]
[mole_rate_SiO2_produced]
type = FunctionValuePostprocessor
function = moles_SiO2
indirect_dependencies = 'kg_SiO2_produced_this_timestep dt'
[]
[mole_rate_H2O_produced]
type = FunctionValuePostprocessor
function = moles_H2O
indirect_dependencies = 'kg_H2O_produced_this_timestep dt'
[]
[heat_joules_extracted_this_timestep]
type = PorousFlowPlotQuantity
uo = produced_heat
[]
[production_temperature]
type = PointValue
point = '30 0 0'
variable = temperature
[]
[]
[Functions]
[moles_Na]
type = ParsedFunction
symbol_names = 'kg_Na dt'
symbol_values = 'kg_Na_produced_this_timestep dt'
expression = 'kg_Na * 1000 / 22.9898 / dt'
[]
[moles_Cl]
type = ParsedFunction
symbol_names = 'kg_Cl dt'
symbol_values = 'kg_Cl_produced_this_timestep dt'
expression = 'kg_Cl * 1000 / 35.453 / dt'
[]
[moles_SiO2]
type = ParsedFunction
symbol_names = 'kg_SiO2 dt'
symbol_values = 'kg_SiO2_produced_this_timestep dt'
expression = 'kg_SiO2 * 1000 / 60.0843 / dt'
[]
[moles_H2O]
type = ParsedFunction
symbol_names = 'kg_H2O dt'
symbol_values = 'kg_H2O_produced_this_timestep dt'
expression = 'kg_H2O * 1000 / 18.0152 / dt'
[]
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
thermal_expansion = 0
bulk_modulus = 2E9
viscosity = 1E-3
density0 = 1000
cv = 4000.0
cp = 4000.0
[]
[]
[PorousFlowFullySaturated]
coupling_type = ThermoHydro
porepressure = porepressure
temperature = temperature
mass_fraction_vars = 'f0 f1 f2'
save_component_rate_in = 'rate_Na rate_Cl rate_SiO2 rate_H2O' # change in kg at every node / dt
fp = the_simple_fluid
temperature_unit = Celsius
[]
[AuxVariables]
[injection_temperature]
initial_condition = 200
[]
[injection_rate_massfrac_Na]
initial_condition = 0.002285946
[]
[injection_rate_massfrac_Cl]
initial_condition = 0.0035252
[]
[injection_rate_massfrac_SiO2]
initial_condition = 1.3741E-05
[]
[injection_rate_massfrac_H2O]
initial_condition = 0.994175112
[]
[rate_H2O]
[]
[rate_Na]
[]
[rate_Cl]
[]
[rate_SiO2]
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosityConst # this simulation has no porosity changes from dissolution
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '0 0 0 0 0 0 0 0 0'
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
density = 2500.0
specific_heat_capacity = 1200.0
[]
[]
[Preconditioning]
active = typically_efficient
[typically_efficient]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = ' hypre boomeramg'
[]
[strong]
type = SMP
full = true
petsc_options = '-ksp_diagonal_scale -ksp_diagonal_scale_fix'
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = ' asm ilu NONZERO 2'
[]
[probably_too_strong]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu mumps'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 7.76E6 # 90 days
dt = 1E5
[]
[Outputs]
exodus = true
[]
[MultiApps]
[react]
type = TransientMultiApp
input_files = aquifer_geochemistry.i
clone_master_mesh = true
execute_on = 'timestep_end'
[]
[]
[Transfers]
[changes_due_to_flow]
type = MultiAppCopyTransfer
source_variable = 'rate_H2O rate_Na rate_Cl rate_SiO2 temperature'
variable = 'pf_rate_H2O pf_rate_Na pf_rate_Cl pf_rate_SiO2 temperature'
to_multi_app = react
[]
[massfrac_from_geochem]
type = MultiAppCopyTransfer
source_variable = 'massfrac_Na massfrac_Cl massfrac_SiO2'
variable = 'f0 f1 f2'
from_multi_app = react
[]
[]
(modules/porous_flow/test/tests/dirackernels/bh_except16.i)
# fully-saturated
# production
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
function_of = temperature
bottom_p_or_t = 0
fluid_phase = 0
point_file = bh02.bh
SumQuantityUO = borehole_total_outflow_mass
variable = pp
unit_weight = '0 0 0'
character = 1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
expression = abs((a-c+d)/2/(a+c))
symbol_names = 'a c d'
symbol_values = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
(modules/porous_flow/examples/ates/ates.i)
# Simulation designed to assess the recovery efficiency of a single-well ATES system
# Using KT stabilisation
# Boundary conditions: fixed porepressure and temperature at top, bottom and far end of model.
#####################################
flux_limiter = minmod # minmod, vanleer, mc, superbee, none
# depth of top of aquifer (m)
depth = 400
inject_fluid_mass = 1E8 # kg
produce_fluid_mass = ${inject_fluid_mass} # kg
inject_temp = 90 # degC
inject_time = 91 # days
store_time = 91 # days
produce_time = 91 # days
rest_time = 91 # days
num_cycles = 5 # Currently needs to be <= 10
cycle_length = '${fparse inject_time + store_time + produce_time + rest_time}'
end_simulation = '${fparse cycle_length * num_cycles}'
# Note: I have setup 10 cycles but you can set num_cycles less than 10.
start_injection1 = 0
start_injection2 = ${cycle_length}
start_injection3 = '${fparse cycle_length * 2}'
start_injection4 = '${fparse cycle_length * 3}'
start_injection5 = '${fparse cycle_length * 4}'
start_injection6 = '${fparse cycle_length * 5}'
start_injection7 = '${fparse cycle_length * 6}'
start_injection8 = '${fparse cycle_length * 7}'
start_injection9 = '${fparse cycle_length * 8}'
start_injection10 = '${fparse cycle_length * 9}'
end_injection1 = '${fparse start_injection1 + inject_time}'
end_injection2 = '${fparse start_injection2 + inject_time}'
end_injection3 = '${fparse start_injection3 + inject_time}'
end_injection4 = '${fparse start_injection4 + inject_time}'
end_injection5 = '${fparse start_injection5 + inject_time}'
end_injection6 = '${fparse start_injection6 + inject_time}'
end_injection7 = '${fparse start_injection7 + inject_time}'
end_injection8 = '${fparse start_injection8 + inject_time}'
end_injection9 = '${fparse start_injection9 + inject_time}'
end_injection10 = '${fparse start_injection10 + inject_time}'
start_production1 = '${fparse end_injection1 + store_time}'
start_production2 = '${fparse end_injection2 + store_time}'
start_production3 = '${fparse end_injection3 + store_time}'
start_production4 = '${fparse end_injection4 + store_time}'
start_production5 = '${fparse end_injection5 + store_time}'
start_production6 = '${fparse end_injection6 + store_time}'
start_production7 = '${fparse end_injection7 + store_time}'
start_production8 = '${fparse end_injection8 + store_time}'
start_production9 = '${fparse end_injection9 + store_time}'
start_production10 = '${fparse end_injection10 + store_time}'
end_production1 = '${fparse start_production1 + produce_time}'
end_production2 = '${fparse start_production2 + produce_time}'
end_production3 = '${fparse start_production3 + produce_time}'
end_production4 = '${fparse start_production4 + produce_time}'
end_production5 = '${fparse start_production5 + produce_time}'
end_production6 = '${fparse start_production6 + produce_time}'
end_production7 = '${fparse start_production7 + produce_time}'
end_production8 = '${fparse start_production8 + produce_time}'
end_production9 = '${fparse start_production9 + produce_time}'
end_production10 = '${fparse start_production10 + produce_time}'
synctimes = '${start_injection1} ${end_injection1} ${start_production1} ${end_production1}
${start_injection2} ${end_injection2} ${start_production2} ${end_production2}
${start_injection3} ${end_injection3} ${start_production3} ${end_production3}
${start_injection4} ${end_injection4} ${start_production4} ${end_production4}
${start_injection5} ${end_injection5} ${start_production5} ${end_production5}
${start_injection6} ${end_injection6} ${start_production6} ${end_production6}
${start_injection7} ${end_injection7} ${start_production7} ${end_production7}
${start_injection8} ${end_injection8} ${start_production8} ${end_production8}
${start_injection9} ${end_injection9} ${start_production9} ${end_production9}
${start_injection10} ${end_injection10} ${start_production10} ${end_production10}'
#####################################
# Geometry in RZ coordinates
# borehole radius (m)
bh_r = 0.1
# model radius (m)
max_r = 1000
# aquifer thickness (m)
aq_thickness = 20
# cap thickness (m)
cap_thickness = 40
# injection region top and bottom (m). Note, the mesh is created with the aquifer in y = (-0.5 * aq_thickness, 0.5 * aq_thickness), irrespective of depth (depth only sets the insitu porepressure and temperature)
screen_top = '${fparse 0.5 * aq_thickness}'
screen_bottom = '${fparse -0.5 * aq_thickness}'
# number of elements in radial direction
num_r = 25
# number of elements across half height of aquifer
num_y_aq = 10
# number of elements across height of cap
num_y_cap = 8
# mesh bias in radial direction
bias_r = 1.22
# mesh bias in vertical direction in aquifer top
bias_y_aq_top = 0.9
# mesh bias in vertical direction in cap top
bias_y_cap_top = 1.3
# mesh bias in vertical direction in aquifer bottom
bias_y_aq_bottom = '${fparse 1.0 / bias_y_aq_top}'
# mesh bias in vertical direction in cap bottom
bias_y_cap_bottom = '${fparse 1.0 / bias_y_cap_top}'
depth_centre = '${fparse depth + aq_thickness/2}'
#####################################
# temperature at ground surface (degC)
temp0 = 20
# Vertical geothermal gradient (K/m). A positive number means temperature increases downwards.
geothermal_gradient = 20E-3
#####################################
# Gravity
gravity = -9.81
#####################################
half_aq_thickness = '${fparse aq_thickness * 0.5}'
half_height = '${fparse half_aq_thickness + cap_thickness}'
approx_screen_length = '${fparse screen_top - screen_bottom}'
# Thermal radius (note this is not strictly correct, it should use the bulk specific heat
# capacity as defined below, but it doesn't matter here because this is purely for
# defining the region of refined mesh)
th_r = '${fparse sqrt(inject_fluid_mass / 1000 * 4.12e6 / (approx_screen_length * 3.1416 * aq_specific_heat_cap * aq_density))}'
# radius of fine mesh
fine_r = '${fparse th_r * 2}'
bias_r_fine = 1
num_r_fine = '${fparse int(fine_r/1)}'
######################################
# aquifer properties
aq_porosity = 0.25
aq_hor_perm = 1E-11 # m^2
aq_ver_perm = 2E-12 # m^2
aq_density = 2650 # kg/m^3
aq_specific_heat_cap = 800 # J/Kg/K
aq_hor_thermal_cond = 3 # W/m/K
aq_ver_thermal_cond = 3 # W/m/K
aq_disp_parallel = 0 # m
aq_disp_perp = 0 # m
# Bulk volumetric heat capacity of aquifer:
aq_vol_cp = '${fparse aq_specific_heat_cap * aq_density * (1 - aq_porosity) + 4180 * 1000 * aq_porosity}'
# Thermal radius (correct version using bulk cp):
R_th = '${fparse sqrt(inject_fluid_mass * 4180 / (approx_screen_length * 3.1416 * aq_vol_cp))}'
aq_lambda_eff_hor = '${fparse aq_hor_thermal_cond + 0.3 * aq_disp_parallel * R_th * aq_vol_cp / (inject_time * 60 * 60 * 24)}'
aq_lambda_eff_ver = '${fparse aq_ver_thermal_cond + 0.3 * aq_disp_perp * R_th * aq_vol_cp / (inject_time * 60 * 60 * 24)}'
aq_hor_dry_thermal_cond = '${fparse aq_lambda_eff_hor * 60 * 60 * 24}' # J/day/m/K
aq_ver_dry_thermal_cond = '${fparse aq_lambda_eff_ver * 60 * 60 * 24}' # J/day/m/K
aq_hor_wet_thermal_cond = '${fparse aq_lambda_eff_hor * 60 * 60 * 24}' # J/day/m/K
aq_ver_wet_thermal_cond = '${fparse aq_lambda_eff_ver * 60 * 60 * 24}' # J/day/m/K
# cap-rock properties
cap_porosity = 0.25
cap_hor_perm = 1E-16 # m^2
cap_ver_perm = 1E-17 # m^2
cap_density = 2650 # kg/m^3
cap_specific_heat_cap = 800 # J/kg/K
cap_hor_thermal_cond = 3 # W/m/K
cap_ver_thermal_cond = 3 # W/m/K
cap_hor_dry_thermal_cond = '${fparse cap_hor_thermal_cond * 60 * 60 * 24}' # J/day/m/K
cap_ver_dry_thermal_cond = '${fparse cap_ver_thermal_cond * 60 * 60 * 24}' # J/day/m/K
cap_hor_wet_thermal_cond = '${fparse cap_hor_thermal_cond * 60 * 60 * 24}' # J/day/m/K
cap_ver_wet_thermal_cond = '${fparse cap_ver_thermal_cond * 60 * 60 * 24}' # J/day/m/K
######################################
[Mesh]
coord_type = RZ
[aq_top_fine]
type = GeneratedMeshGenerator
dim = 2
nx = ${num_r_fine}
xmin = ${bh_r}
xmax = ${fine_r}
bias_x = ${bias_r_fine}
bias_y = ${bias_y_aq_top}
ny = ${num_y_aq}
ymin = 0
ymax = ${half_aq_thickness}
[]
[cap_top_fine]
type = GeneratedMeshGenerator
dim = 2
nx = ${num_r_fine}
xmin = ${bh_r}
xmax = ${fine_r}
bias_x = ${bias_r_fine}
bias_y = ${bias_y_cap_top}
ny = ${num_y_cap}
ymax = ${half_height}
ymin = ${half_aq_thickness}
[]
[aq_and_cap_top_fine]
type = StitchedMeshGenerator
inputs = 'aq_top_fine cap_top_fine'
clear_stitched_boundary_ids = true
stitch_boundaries_pairs = 'top bottom'
[]
[aq_bottom_fine]
type = GeneratedMeshGenerator
dim = 2
nx = ${num_r_fine}
xmin = ${bh_r}
xmax = ${fine_r}
bias_x = ${bias_r_fine}
bias_y = ${bias_y_aq_bottom}
ny = ${num_y_aq}
ymax = 0
ymin = -${half_aq_thickness}
[]
[cap_bottom_fine]
type = GeneratedMeshGenerator
dim = 2
nx = ${num_r_fine}
xmin = ${bh_r}
xmax = ${fine_r}
bias_x = ${bias_r_fine}
bias_y = ${bias_y_cap_bottom}
ny = ${num_y_cap}
ymin = -${half_height}
ymax = -${half_aq_thickness}
[]
[aq_and_cap_bottom_fine]
type = StitchedMeshGenerator
inputs = 'aq_bottom_fine cap_bottom_fine'
clear_stitched_boundary_ids = true
stitch_boundaries_pairs = 'bottom top'
merge_boundaries_with_same_name = false
[]
[aq_and_cap_fine]
type = StitchedMeshGenerator
inputs = 'aq_and_cap_bottom_fine aq_and_cap_top_fine'
clear_stitched_boundary_ids = true
stitch_boundaries_pairs = 'top bottom'
[]
[aq_top]
type = GeneratedMeshGenerator
dim = 2
nx = ${num_r}
xmin = ${fine_r}
xmax = ${max_r}
bias_x = ${bias_r}
bias_y = ${bias_y_aq_top}
ny = ${num_y_aq}
ymin = 0
ymax = ${half_aq_thickness}
[]
[cap_top]
type = GeneratedMeshGenerator
dim = 2
nx = ${num_r}
xmin = ${fine_r}
xmax = ${max_r}
bias_x = ${bias_r}
bias_y = ${bias_y_cap_top}
ny = ${num_y_cap}
ymax = ${half_height}
ymin = ${half_aq_thickness}
[]
[aq_and_cap_top]
type = StitchedMeshGenerator
inputs = 'aq_top cap_top'
clear_stitched_boundary_ids = true
stitch_boundaries_pairs = 'top bottom'
[]
[aq_bottom]
type = GeneratedMeshGenerator
dim = 2
nx = ${num_r}
xmin = ${fine_r}
xmax = ${max_r}
bias_x = ${bias_r}
bias_y = ${bias_y_aq_bottom}
ny = ${num_y_aq}
ymax = 0
ymin = -${half_aq_thickness}
[]
[cap_bottom]
type = GeneratedMeshGenerator
dim = 2
nx = ${num_r}
xmin = ${fine_r}
xmax = ${max_r}
bias_x = ${bias_r}
bias_y = ${bias_y_cap_bottom}
ny = ${num_y_cap}
ymin = -${half_height}
ymax = -${half_aq_thickness}
[]
[aq_and_cap_bottom]
type = StitchedMeshGenerator
inputs = 'aq_bottom cap_bottom'
clear_stitched_boundary_ids = true
stitch_boundaries_pairs = 'bottom top'
[]
[aq_and_cap]
type = StitchedMeshGenerator
inputs = 'aq_and_cap_bottom aq_and_cap_top'
clear_stitched_boundary_ids = true
stitch_boundaries_pairs = 'top bottom'
[]
[aq_and_cap_all]
type = StitchedMeshGenerator
inputs = 'aq_and_cap_fine aq_and_cap'
clear_stitched_boundary_ids = true
stitch_boundaries_pairs = 'right left'
[]
[aquifer]
type = ParsedSubdomainMeshGenerator
input = aq_and_cap_all
combinatorial_geometry = 'y >= -${half_aq_thickness} & y <= ${half_aq_thickness}'
block_id = 1
[]
[top_cap]
type = ParsedSubdomainMeshGenerator
input = aquifer
combinatorial_geometry = 'y >= ${half_aq_thickness}'
block_id = 2
[]
[bottom_cap]
type = ParsedSubdomainMeshGenerator
input = top_cap
combinatorial_geometry = 'y <= -${half_aq_thickness}'
block_id = 3
[]
[injection_area]
type = ParsedGenerateSideset
combinatorial_geometry = 'x<=${bh_r}*1.000001 & y >= ${screen_bottom} & y <= ${screen_top}'
included_subdomains = 1
new_sideset_name = 'injection_area'
input = 'bottom_cap'
[]
[rename]
type = RenameBlockGenerator
old_block = '1 2 3'
new_block = 'aquifer caps caps'
input = 'injection_area'
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 ${gravity} 0'
[]
[Variables]
[porepressure]
[]
[temperature]
scaling = 1E-5
[]
[]
[PorousFlowFullySaturated]
coupling_type = ThermoHydro
porepressure = porepressure
temperature = temperature
fp = tabulated_water
stabilization = KT
flux_limiter_type = ${flux_limiter}
use_displaced_mesh = false
temperature_unit = Celsius
pressure_unit = Pa
time_unit = days
[]
[ICs]
[porepressure]
type = FunctionIC
variable = porepressure
function = insitu_pressure
[]
[temperature]
type = FunctionIC
variable = temperature
function = insitu_temperature
[]
[]
[BCs]
[outer_boundary_porepressure]
type = FunctionDirichletBC
preset = true
variable = porepressure
function = insitu_pressure
boundary = 'bottom right top'
[]
[outer_boundary_temperature]
type = FunctionDirichletBC
preset = true
variable = temperature
function = insitu_temperature
boundary = 'bottom right top'
[]
[inject_heat]
type = FunctionDirichletBC
variable = temperature
function = ${inject_temp}
boundary = 'injection_area'
[]
[inject_fluid]
type = PorousFlowSink
variable = porepressure
boundary = injection_area
flux_function = injection_rate_value
[]
[produce_heat]
type = PorousFlowSink
variable = temperature
boundary = injection_area
flux_function = production_rate_value
fluid_phase = 0
use_enthalpy = true
save_in = heat_flux_out
[]
[produce_fluid]
type = PorousFlowSink
variable = porepressure
boundary = injection_area
flux_function = production_rate_value
[]
[]
[Controls]
[inject_on]
type = ConditionalFunctionEnableControl
enable_objects = 'BCs::inject_heat BCs::inject_fluid'
conditional_function = inject
implicit = false
execute_on = 'initial timestep_begin'
[]
[produce_on]
type = ConditionalFunctionEnableControl
enable_objects = 'BCs::produce_heat BCs::produce_fluid'
conditional_function = produce
implicit = false
execute_on = 'initial timestep_begin'
[]
[]
[Functions]
[insitu_pressure]
type = ParsedFunction
expression = '(y - ${depth_centre}) * 1000 * ${gravity} + 1E5' # approx insitu pressure in Pa
[]
[insitu_temperature]
type = ParsedFunction
expression = '${temp0} + (${depth_centre} - y) * ${geothermal_gradient}'
[]
[inject]
type = ParsedFunction
expression = 'if(t >= ${start_injection1} & t < ${end_injection1}, 1,
if(t >= ${start_injection2} & t < ${end_injection2}, 1,
if(t >= ${start_injection3} & t < ${end_injection3}, 1,
if(t >= ${start_injection4} & t < ${end_injection4}, 1,
if(t >= ${start_injection5} & t < ${end_injection5}, 1,
if(t >= ${start_injection6} & t < ${end_injection6}, 1,
if(t >= ${start_injection7} & t < ${end_injection7}, 1,
if(t >= ${start_injection8} & t < ${end_injection8}, 1,
if(t >= ${start_injection9} & t < ${end_injection9}, 1,
if(t >= ${start_injection10} & t < ${end_injection10}, 1, 0))))))))))'
[]
[produce]
type = ParsedFunction
expression = 'if(t >= ${start_production1} & t < ${end_production1}, 1,
if(t >= ${start_production2} & t < ${end_production2}, 1,
if(t >= ${start_production3} & t < ${end_production3}, 1,
if(t >= ${start_production4} & t < ${end_production4}, 1,
if(t >= ${start_production5} & t < ${end_production5}, 1,
if(t >= ${start_production6} & t < ${end_production6}, 1,
if(t >= ${start_production7} & t < ${end_production7}, 1,
if(t >= ${start_production8} & t < ${end_production8}, 1,
if(t >= ${start_production9} & t < ${end_production9}, 1,
if(t >= ${start_production10} & t < ${end_production10}, 1, 0))))))))))'
[]
[injection_rate_value]
type = ParsedFunction
symbol_names = true_screen_area
symbol_values = true_screen_area
expression = '-${inject_fluid_mass}/(true_screen_area * ${inject_time})'
[]
[production_rate_value]
type = ParsedFunction
symbol_names = true_screen_area
symbol_values = true_screen_area
expression = '${produce_fluid_mass}/(true_screen_area * ${produce_time})'
[]
[heat_out_in_timestep]
type = ParsedFunction
symbol_names = 'dt heat_out'
symbol_values = 'dt heat_out_fromBC'
expression = 'dt*heat_out'
[]
[produced_T_time_integrated]
type = ParsedFunction
symbol_names = 'dt produced_T'
symbol_values = 'dt produced_T'
expression = 'dt*produced_T / ${produce_time}'
[]
[]
[AuxVariables]
[density]
family = MONOMIAL
order = CONSTANT
[]
[porosity]
family = MONOMIAL
order = CONSTANT
[]
[heat_flux_out]
outputs = none
[]
[]
[AuxKernels]
[density]
type = PorousFlowPropertyAux
variable = density
property = density
[]
[porosity]
type = PorousFlowPropertyAux
variable = porosity
property = porosity
[]
[]
[FluidProperties]
[true_water]
type = Water97FluidProperties
[]
[tabulated_water]
type = TabulatedFluidProperties
fp = true_water
temperature_min = 275 # K
temperature_max = 600
interpolated_properties = 'density viscosity enthalpy internal_energy'
fluid_property_output_file = water97_tabulated_modified.csv
# Comment out the fp parameter and uncomment below to use the newly generated tabulation
# fluid_property_file = water97_tabulated_modified.csv
[]
[]
[Materials]
[porosity_aq]
type = PorousFlowPorosityConst
porosity = ${aq_porosity}
block = aquifer
[]
[porosity_caps]
type = PorousFlowPorosityConst
porosity = ${cap_porosity}
block = caps
[]
[permeability_aquifer]
type = PorousFlowPermeabilityConst
block = aquifer
permeability = '${aq_hor_perm} 0 0 0 ${aq_ver_perm} 0 0 0 0'
[]
[permeability_caps]
type = PorousFlowPermeabilityConst
block = caps
permeability = '${cap_hor_perm} 0 0 0 ${cap_ver_perm} 0 0 0 0'
[]
[aq_internal_energy]
type = PorousFlowMatrixInternalEnergy
block = aquifer
density = ${aq_density}
specific_heat_capacity = ${aq_specific_heat_cap}
[]
[caps_internal_energy]
type = PorousFlowMatrixInternalEnergy
block = caps
density = ${cap_density}
specific_heat_capacity = ${cap_specific_heat_cap}
[]
[aq_thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
block = aquifer
dry_thermal_conductivity = '${aq_hor_dry_thermal_cond} 0 0 0 ${aq_ver_dry_thermal_cond} 0 0 0 0'
wet_thermal_conductivity = '${aq_hor_wet_thermal_cond} 0 0 0 ${aq_ver_wet_thermal_cond} 0 0 0 0'
[]
[caps_thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
block = caps
dry_thermal_conductivity = '${cap_hor_dry_thermal_cond} 0 0 0 ${cap_ver_dry_thermal_cond} 0 0 0 0'
wet_thermal_conductivity = '${cap_hor_wet_thermal_cond} 0 0 0 ${cap_ver_wet_thermal_cond} 0 0 0 0'
[]
[]
[Postprocessors]
[true_screen_area] # this accounts for meshes that do not match screen_top and screen_bottom exactly
type = AreaPostprocessor
boundary = injection_area
execute_on = 'initial'
outputs = 'none'
[]
[dt]
type = TimestepSize
[]
[heat_out_fromBC]
type = NodalSum
variable = heat_flux_out
boundary = injection_area
execute_on = 'initial timestep_end'
outputs = 'none'
[]
[heat_out_per_timestep]
type = FunctionValuePostprocessor
function = heat_out_in_timestep
execute_on = 'timestep_end'
outputs = 'none'
[]
[heat_out_cumulative]
type = CumulativeValuePostprocessor
postprocessor = heat_out_per_timestep
execute_on = 'timestep_end'
outputs = 'csv console'
[]
[produced_T]
type = SideAverageValue
boundary = injection_area
variable = temperature
execute_on = 'initial timestep_end'
outputs = 'csv console'
[]
[produced_T_time_integrated]
type = FunctionValuePostprocessor
function = produced_T_time_integrated
execute_on = 'timestep_end'
outputs = 'none'
[]
[produced_T_cumulative]
type = CumulativeValuePostprocessor
postprocessor = produced_T_time_integrated
execute_on = 'timestep_end'
outputs = 'csv console'
[]
[]
[Preconditioning]
[basic]
type = SMP
full = true
petsc_options = '-ksp_diagonal_scale -ksp_diagonal_scale_fix'
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = ' asm lu NONZERO 2'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = ${end_simulation}
timestep_tolerance = 1e-5
[TimeStepper]
type = IterationAdaptiveDT
dt = 1e-3
growth_factor = 2
[]
dtmax = 1
dtmin = 1e-5
# rough calc for fluid, |R| ~ V*k*1E6 ~ V*1E-5
# rough calc for heat, |R| ~ V*(lam*1E-3 + h*1E-5) ~ V*(1E3 + 1E-2)
# so scale heat by 1E-7 and go for nl_abs_tol = 1E-4, which should give a max error of
# ~1Pa and ~0.1K in the first metre around the borehole
nl_abs_tol = 1E-4
nl_rel_tol = 1E-5
[]
[Outputs]
sync_times = ${synctimes}
[ex]
type = Exodus
time_step_interval = 20
[]
[csv]
type = CSV
execute_postprocessors_on = 'initial timestep_end'
[]
[]
(modules/porous_flow/test/tests/aux_kernels/darcy_velocity_fv.i)
# checking that the PorousFlowDarcyVelocityComponent AuxKernel works as expected
# for the fully-saturated case (relative-permeability = 1) using finite volumes
[Mesh]
type = GeneratedMesh
dim = 3
xmin = 0
xmax = 1
ymin = 0
ymax = 1
zmin = 0
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '1 -2 3'
[]
[Variables]
[pp]
family = MONOMIAL
order = CONSTANT
fv = true
[]
[]
[ICs]
[pinit]
type = FunctionIC
function = x
variable = pp
[]
[]
[FVKernels]
[mass0]
type = FVPorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[AuxVariables]
[vel_x]
order = CONSTANT
family = MONOMIAL
[]
[vel_y]
order = CONSTANT
family = MONOMIAL
[]
[vel_z]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[vel_x]
type = ADPorousFlowDarcyVelocityComponent
variable = vel_x
component = x
fluid_phase = 0
[]
[vel_y]
type = ADPorousFlowDarcyVelocityComponent
variable = vel_y
component = y
fluid_phase = 0
[]
[vel_z]
type = ADPorousFlowDarcyVelocityComponent
variable = vel_z
component = z
fluid_phase = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1e6
viscosity = 3.2
density0 = 1
thermal_expansion = 0
[]
[]
[Postprocessors]
[vel_x]
type = PointValue
variable = vel_x
point = '0.5 0.5 0.5'
[]
[vel_y]
type = PointValue
variable = vel_y
point = '0.5 0.5 0.5'
[]
[vel_z]
type = PointValue
variable = vel_z
point = '0.5 0.5 0.5'
[]
[]
[Materials]
[temperature]
type = ADPorousFlowTemperature
[]
[ppss]
type = ADPorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = ADPorousFlowMassFraction
[]
[simple_fluid]
type = ADPorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = ADPorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = ADPorousFlowRelativePermeabilityConst
phase = 0
kr = 1
[]
[porosity]
type = ADPorousFlowPorosityConst
porosity = 0.1
[]
[]
[Executioner]
type = Transient
solve_type = Newton
nl_abs_tol = 1e-16
dt = 1
end_time = 1
[]
[Outputs]
execute_on = 'timestep_end'
csv = true
[]
(modules/porous_flow/examples/tutorial/08.i)
# Unsaturated Darcy-Richards flow
[Mesh]
[annular]
type = AnnularMeshGenerator
nr = 10
rmin = 1.0
rmax = 10
growth_r = 1.4
nt = 4
dmin = 0
dmax = 90
[]
[make3D]
input = annular
type = MeshExtruderGenerator
extrusion_vector = '0 0 12'
num_layers = 3
bottom_sideset = 'bottom'
top_sideset = 'top'
[]
[shift_down]
type = TransformGenerator
transform = TRANSLATE
vector_value = '0 0 -6'
input = make3D
[]
[aquifer]
type = SubdomainBoundingBoxGenerator
block_id = 1
bottom_left = '0 0 -2'
top_right = '10 10 2'
input = shift_down
[]
[injection_area]
type = ParsedGenerateSideset
combinatorial_geometry = 'x*x+y*y<1.01'
included_subdomains = 1
new_sideset_name = 'injection_area'
input = 'aquifer'
[]
[rename]
type = RenameBlockGenerator
old_block = '0 1'
new_block = 'caps aquifer'
input = 'injection_area'
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[porepressure]
[]
[]
[PorousFlowUnsaturated]
porepressure = porepressure
coupling_type = Hydro
gravity = '0 0 0'
fp = the_simple_fluid
relative_permeability_exponent = 3
relative_permeability_type = Corey
residual_saturation = 0.1
van_genuchten_alpha = 1E-6
van_genuchten_m = 0.6
[]
[BCs]
[production]
type = PorousFlowSink
variable = porepressure
fluid_phase = 0
flux_function = 1E-2
use_relperm = true
boundary = injection_area
[]
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2E9
viscosity = 1.0E-3
density0 = 1000.0
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[permeability_aquifer]
type = PorousFlowPermeabilityConst
block = aquifer
permeability = '1E-14 0 0 0 1E-14 0 0 0 1E-14'
[]
[permeability_caps]
type = PorousFlowPermeabilityConst
block = caps
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-16'
[]
[]
[Preconditioning]
active = basic
[basic]
type = SMP
full = true
petsc_options = '-ksp_diagonal_scale -ksp_diagonal_scale_fix'
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = ' asm lu NONZERO 2'
[]
[preferred_but_might_not_be_installed]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu mumps'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1E6
dt = 1E5
nl_abs_tol = 1E-12
nl_rel_tol = 1e-12
[]
[Outputs]
exodus = true
[]
(modules/porous_flow/test/tests/hysteresis/except08.i)
# Exception testing of PorousFlowHysteresisOrder
# Incorrectly ordered previous_turning_points
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[]
[PorousFlowBasicTHM]
porepressure = pp
fp = simple_fluid
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[biot_modulus]
type = PorousFlowConstantBiotModulus
biot_coefficient = 0.8
solid_bulk_compliance = 2e-7
fluid_bulk_modulus = 1e7
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-13 0 0 0 1e-13 0 0 0 1e-13'
[]
[hys_order]
type = PorousFlowHysteresisOrder
initial_order = 3
previous_turning_points = '0.6 0.8 0.5'
[]
[]
[Preconditioning]
[basic]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
(modules/porous_flow/test/tests/basic_advection/2phase.i)
# Basic advection of u in a 2-phase situation
#
# grad(P) = -2
# density * gravity = 4 * 0.25
# grad(P) - density * gravity = -3
# permeability = 10
# relative permeability = 0.5
# viscosity = 150
# so Darcy velocity = 0.1
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[u]
[]
[]
[AuxVariables]
[P0]
[]
[P1]
[]
[]
[ICs]
[P0]
type = FunctionIC
variable = P0
function = '0'
[]
[P1]
type = FunctionIC
variable = P1
function = '2*(1-x)'
[]
[u]
type = FunctionIC
variable = u
function = 'if(x<0.1,1,0)'
[]
[]
[Kernels]
[u_dot]
type = TimeDerivative
variable = u
[]
[u_advection]
type = PorousFlowBasicAdvection
variable = u
phase = 1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = ''
number_fluid_phases = 2
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureConst
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
density0 = 32
viscosity = 123
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 4
thermal_expansion = 0
viscosity = 150.0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = P0
phase1_porepressure = P1
capillary_pressure = pc
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '10 0 0 0 10 0 0 0 10'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityConst
kr = 0.5
phase = 1
[]
[darcy_velocity]
type = PorousFlowDarcyVelocityMaterial
gravity = '0.25 0 0'
[]
[]
[BCs]
[left]
type = DirichletBC
boundary = left
value = 1
variable = u
[]
[right]
type = DirichletBC
boundary = right
value = 0
variable = u
[]
[]
[Preconditioning]
[basic]
type = SMP
full = true
petsc_options_iname = '-pc_type -snes_rtol'
petsc_options_value = ' lu 1E-10'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 5
[]
[Outputs]
exodus = true
print_linear_residuals = false
[]
(modules/porous_flow/test/tests/sinks/s08.i)
# apply a sink flux on just one component of a 3-component, 2-phase system and observe the correct behavior
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = 0
xmax = 1
ymin = 0
ymax = 1
zmin = 0
zmax = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pwater frac_ph0_c0 pgas'
number_fluid_phases = 2
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1.1
[]
[]
[Variables]
[pwater]
[]
[frac_ph0_c0]
initial_condition = 0.3
[]
[pgas]
[]
[]
[ICs]
[pwater]
type = FunctionIC
variable = pwater
function = y
[]
[pgas]
type = FunctionIC
variable = pgas
function = y+3
[]
[]
[Kernels]
[mass_c0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = frac_ph0_c0
[]
[mass_c1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = pwater
[]
[mass_c2]
type = PorousFlowMassTimeDerivative
fluid_component = 2
variable = pgas
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2.3
density0 = 1.5
thermal_expansion = 0
viscosity = 2.1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 1.3
density0 = 1.1
thermal_expansion = 0
viscosity = 1.1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = pwater
phase1_porepressure = pgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'frac_ph0_c0 frac_ph0_c1 frac_ph1_c0 frac_ph1_c1'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0.2 0 0 0 0.1 0 0 0 0.1'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
[]
[]
[AuxVariables]
[flux_out]
[]
[frac_ph0_c1]
initial_condition = 0.35
[]
[frac_ph1_c0]
initial_condition = 0.1
[]
[frac_ph1_c1]
initial_condition = 0.8
[]
[]
[Postprocessors]
[total_mass_comp0]
type = PorousFlowFluidMass
fluid_component = 0
[]
[total_mass_comp1]
type = PorousFlowFluidMass
fluid_component = 1
[]
[total_mass_comp2]
type = PorousFlowFluidMass
fluid_component = 2
[]
[frac_ph1_c1_00]
type = PointValue
point = '0 0 0'
variable = frac_ph1_c1
execute_on = 'initial timestep_end'
[]
[frac_ph0_c1_00]
type = PointValue
point = '0 0 0'
variable = frac_ph0_c1
execute_on = 'initial timestep_end'
[]
[flux_00]
type = PointValue
point = '0 0 0'
variable = flux_out
execute_on = 'initial timestep_end'
[]
[pgas_00]
type = PointValue
point = '0 0 0'
variable = pgas
execute_on = 'initial timestep_end'
[]
[pwater_00]
type = PointValue
point = '0 0 0'
variable = pwater
execute_on = 'initial timestep_end'
[]
[m1_00]
type = ParsedPostprocessor
expression = 'frac_ph1_c1_00*vol*por*dens0gas*exp(pgas_00/bulkgas)*(1-pow(1+pow(al*(pgas_00-pwater_00),1.0/(1-m)),-m))+frac_ph0_c1_00*vol*por*dens0water*exp(pwater_00/bulkwater)*(pow(1+pow(al*(pgas_00-pwater_00),1.0/(1-m)),-m))'
constant_names = 'vol por dens0gas bulkgas al m dens0water bulkwater'
constant_expressions = '0.25 0.1 1.1 1.3 1.1 0.5 1.5 2.3'
pp_names = 'pgas_00 pwater_00 frac_ph1_c1_00 frac_ph0_c1_00'
execute_on = 'initial timestep_end'
[]
[dm1_00]
type = ChangeOverTimePostprocessor
postprocessor = m1_00
outputs = none
[]
[m1_00_prev]
type = ParsedPostprocessor
expression = 'm1_00 - dm1_00'
pp_names = 'm1_00 dm1_00'
outputs = 'console'
[]
[del_m1_00]
type = ParsedPostprocessor
expression = 'frac_ph1_c1_00*fcn*area*dt*pow(1-pow(1+pow(al*(pgas_00-pwater_00),1.0/(1-m)),-m), 2)'
constant_names = 'fcn area dt al m'
constant_expressions = '100 0.5 1E-3 1.1 0.5'
pp_names = 'frac_ph1_c1_00 pgas_00 pwater_00'
outputs = 'console'
[]
[m1_00_expect]
type = ParsedPostprocessor
expression = 'm1_00_prev - del_m1_00'
pp_names = 'm1_00_prev del_m1_00'
[]
[]
[BCs]
[flux_ph1_c1]
type = PorousFlowSink
boundary = 'left'
variable = pwater # sink applied to the mass_c1 Kernel
use_mobility = false
use_relperm = true
mass_fraction_component = 1
fluid_phase = 1
flux_function = 100
save_in = flux_out
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_max_it -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu 100 NONZERO 2'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E-3
end_time = 0.01
nl_rel_tol = 1E-12
nl_abs_tol = 1E-12
[]
[Outputs]
file_base = s08
exodus = true
[console]
type = Console
execute_on = 'nonlinear linear'
[]
[csv]
type = CSV
execute_on = 'timestep_end'
[]
[]
(modules/porous_flow/test/tests/actions/multiblock.i)
# This input file illustrates that PorousFlow can be block-restricted. That is, porous-flow physics acts only on some blocks (block = '0, 1', in this case), and different physics, in this case diffusion, acts on other blocks (block = 2, in this case).
# Here:
# - the Variable "pressure" exists everywhere, but is governed by PorousFlow only on block = '0 1', and diffusion on block = 2
# - the Variable "temp" exists only on block = '0 1', and is governed by PorousFlow there
# - the Variable "temp1" exists only on block = 2, and is governed by diffusion there
# Hence, the PorousFlow Materials only need to be defined on block = '0 1'
[Mesh]
[gmg]
type = GeneratedMeshGenerator
dim = 1
nx = 10
xmin = 0
xmax = 10
[]
[block1]
type = SubdomainBoundingBoxGenerator
input = gmg
block_id = 1
bottom_left = '3 -1 -1'
top_right = '6 1 1'
[]
[block2]
type = SubdomainBoundingBoxGenerator
input = block1
block_id = 2
bottom_left = '6 -1 -1'
top_right = '10 1 1'
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pressure temp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[]
[Variables]
[pressure] # exists over the entire mesh: governed by PorousFlow on block=0, 1, and diffusion on block=2
[]
[temp]
block = '0 1' # only governed by PorousFlow
[]
[temp1]
block = 2 # only governed by diffusion
[]
[]
[Kernels]
[porous_flow_time_derivative]
type = PorousFlowMassTimeDerivative
block = '0 1'
variable = pressure
[]
[porous_flow_flux]
type = PorousFlowAdvectiveFlux
fluid_component = 0
gravity = '0 0 0'
variable = pressure
block = '0 1'
[]
[porous_flow_heat_time_derivative]
type = PorousFlowEnergyTimeDerivative
variable = temp
block = '0 1'
[]
[porous_flow_heat_advection]
type = PorousFlowHeatAdvection
gravity = '0 0 0'
variable = temp
block = '0 1'
[]
[diffusion_p]
type = Diffusion
variable = pressure
block = 2
[]
[diffusion_t1]
type = Diffusion
variable = temp1
block = 2
[]
[]
[AuxVariables]
[density]
family = MONOMIAL
order = CONSTANT
block = '0 1'
[]
[relperm]
family = MONOMIAL
order = CONSTANT
block = '0 1'
[]
[]
[AuxKernels]
[density]
type = PorousFlowPropertyAux
variable = density
property = density
[]
[relperm]
type = PorousFlowPropertyAux
variable = relperm
property = relperm
[]
[]
[Postprocessors]
[density1000]
type = PointValue
point = '0 0 0'
variable = density
[]
[density2000]
type = PointValue
point = '5 0 0'
variable = density
[]
[relperm0.25]
type = PointValue
point = '0 0 0'
variable = relperm
[]
[relperm0.5]
type = PointValue
point = '5 0 0'
variable = relperm
[]
[]
[FluidProperties]
[simple_fluid1000]
type = SimpleFluidProperties
[]
[simple_fluid2000]
type = SimpleFluidProperties
density0 = 2000
[]
[]
[Materials] # note these PorousFlow materials are all on block = '0 1'
[temperature]
type = PorousFlowTemperature
temperature = temp
block = '0 1'
[]
[ppss]
type = PorousFlow1PhaseFullySaturated
porepressure = pressure
block = '0 1'
[]
[massfrac]
type = PorousFlowMassFraction
block = '0 1'
[]
[simple_fluid1000]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1000
phase = 0
block = 0
[]
[simple_fluid2000]
type = PorousFlowSingleComponentFluid
fp = simple_fluid2000
phase = 0
block = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
block = '0 1'
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-15'
block = '0 1'
[]
[relperm]
type = PorousFlowRelativePermeabilityConst
phase = 0
block = 0
kr = 0.25
[]
[relperm1]
type = PorousFlowRelativePermeabilityConst
phase = 0
block = 1
kr = 0.5
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1
density = 1
block = '0 1'
[]
[dummy_material]
type = GenericConstantMaterial
block = 2
prop_names = dummy
prop_values = 0
[]
[]
[Preconditioning]
[lu]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_shift_type'
petsc_options_value = 'lu NONZERO'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
nl_abs_tol = 1e-12
line_search = 'none'
[]
[Outputs]
csv = true
[]
(modules/porous_flow/test/tests/dirackernels/bh_except14.i)
# fully-saturated
# production
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
bottom_p_or_t = 0
fluid_phase = 0
point_file = bh02_huge.bh
SumQuantityUO = borehole_total_outflow_mass
variable = pp
unit_weight = '0 0 0'
character = 1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
expression = abs((a-c+d)/2/(a+c))
symbol_names = 'a c d'
symbol_values = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
(modules/porous_flow/examples/groundwater/ex02_abstraction.i)
# Abstraction groundwater model. See groundwater_models.md for a detailed description
[Mesh]
[from_steady_state]
type = FileMeshGenerator
file = gold/ex02_steady_state_ex.e
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = steady_state_pp
[]
[]
[BCs]
[rainfall_recharge]
type = PorousFlowSink
boundary = zmax
variable = pp
flux_function = -1E-6 # recharge of 0.1mm/day = 1E-4m3/m2/day = 0.1kg/m2/day ~ 1E-6kg/m2/s
[]
[evapotranspiration]
type = PorousFlowHalfCubicSink
boundary = zmax
variable = pp
center = 0.0
cutoff = -5E4 # roots of depth 5m. 5m of water = 5E4 Pa
use_mobility = true
fluid_phase = 0
# Assume pan evaporation of 4mm/day = 4E-3m3/m2/day = 4kg/m2/day ~ 4E-5kg/m2/s
# Assume that if permeability was 1E-10m^2 and water table at topography then ET acts as pan strength
# Because use_mobility = true, then 4E-5 = maximum_flux = max * perm * density / visc = max * 1E-4, so max = 40
max = 40
[]
[]
[DiracKernels]
inactive = polyline_sink_borehole
[river]
type = PorousFlowPolyLineSink
SumQuantityUO = baseflow
point_file = ex02_river.bh
# Assume a perennial river.
# Assume the river has an incision depth of 1m and a stage height of 1.5m, and these are constant in time and uniform over the whole model. Hence, if groundwater head is 0.5m (5000Pa) there will be no baseflow and leakage.
p_or_t_vals = '-999995000 5000 1000005000'
# Assume the riverbed conductance, k_zz*density*river_segment_length*river_width/riverbed_thickness/viscosity = 1E-6*river_segment_length kg/Pa/s
fluxes = '-1E3 0 1E3'
variable = pp
[]
[horizontal_borehole]
type = PorousFlowPeacemanBorehole
SumQuantityUO = abstraction
bottom_p_or_t = -1E5
unit_weight = '0 0 -1E4'
character = 1.0
point_file = ex02.bh
variable = pp
[]
[polyline_sink_borehole]
type = PorousFlowPolyLineSink
SumQuantityUO = abstraction
fluxes = '-0.4 0 0.4'
p_or_t_vals = '-1E8 0 1E8'
point_file = ex02.bh
variable = pp
[]
[]
[Functions]
[steady_state_pp]
type = SolutionFunction
from_variable = pp
solution = steady_state_solution
[]
[baseflow_rate]
type = ParsedFunction
symbol_names = 'baseflow_kg dt'
symbol_values = 'baseflow_kg dt'
expression = 'baseflow_kg / dt * 24.0 * 3600.0 / 400.0'
[]
[abstraction_rate]
type = ParsedFunction
symbol_names = 'abstraction_kg dt'
symbol_values = 'abstraction_kg dt'
expression = 'abstraction_kg / dt * 24.0 * 3600.0'
[]
[]
[AuxVariables]
[ini_pp]
[]
[pp_change]
[]
[]
[AuxKernels]
[ini_pp]
type = FunctionAux
variable = ini_pp
function = steady_state_pp
execute_on = INITIAL
[]
[pp_change]
type = ParsedAux
variable = pp_change
coupled_variables = 'pp ini_pp'
expression = 'pp - ini_pp'
[]
[]
[PorousFlowUnsaturated]
fp = simple_fluid
porepressure = pp
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
[]
[]
[Materials]
[porosity_everywhere]
type = PorousFlowPorosityConst
porosity = 0.05
[]
[permeability_aquifers]
type = PorousFlowPermeabilityConst
block = 'top_aquifer bot_aquifer'
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-13'
[]
[permeability_aquitard]
type = PorousFlowPermeabilityConst
block = aquitard
permeability = '1E-16 0 0 0 1E-16 0 0 0 1E-17'
[]
[]
[UserObjects]
[steady_state_solution]
type = SolutionUserObject
execute_on = INITIAL
mesh = gold/ex02_steady_state_ex.e
timestep = LATEST
system_variables = pp
[]
[baseflow]
type = PorousFlowSumQuantity
[]
[abstraction]
type = PorousFlowSumQuantity
[]
[]
[Postprocessors]
[baseflow_kg]
type = PorousFlowPlotQuantity
uo = baseflow
outputs = 'none'
[]
[dt]
type = TimestepSize
outputs = 'none'
[]
[baseflow_l_per_m_per_day]
type = FunctionValuePostprocessor
function = baseflow_rate
indirect_dependencies = 'baseflow_kg dt'
[]
[abstraction_kg]
type = PorousFlowPlotQuantity
uo = abstraction
outputs = 'none'
[]
[abstraction_kg_per_day]
type = FunctionValuePostprocessor
function = abstraction_rate
indirect_dependencies = 'abstraction_kg dt'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
# following 2 lines are not mandatory, but illustrate a popular preconditioner choice in groundwater models
petsc_options_iname = '-pc_type -sub_pc_type -pc_asm_overlap'
petsc_options_value = ' asm ilu 2 '
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 100
[TimeStepper]
type = FunctionDT
function = 'max(100, t)'
[]
end_time = 8.64E5 # 10 days
nl_abs_tol = 1E-11
[]
[Outputs]
print_linear_residuals = false
[ex]
type = Exodus
execute_on = final
[]
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/fluids/simple_fluid_yr_MPa_C_action.i)
# Version of simple_fluid_yr_MPa_C.i but using a PorousFlowFullySaturated Action, to check that the Action passes the unit choices through to the remainder of PorousFlow
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
thermal_expansion = 2.0E-4
cv = 4000.0
cp = 5000.0
bulk_modulus = 1.0E9
thermal_conductivity = 1.0
viscosity = 1.1E-3
density0 = 1500.0
[]
[]
[Mesh]
type = GeneratedMesh
dim = 1
nx = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[pp]
initial_condition = 10
[]
[T]
initial_condition = 26.85
[]
[]
[PorousFlowFullySaturated]
coupling_type = ThermoHydro
porepressure = pp
temperature = T
temperature_unit = Celsius
pressure_unit = MPa
time_unit = years
fp = the_simple_fluid
[]
[Materials]
# these are needed by the Kernels, but are irrelevant to this particular problem
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[zero_thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '0 0 0 0 0 0 0 0 0'
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1.0
density = 1.0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0 0 0 0 0 0 0 0 0'
[]
[]
[Postprocessors]
[pressure]
type = ElementIntegralVariablePostprocessor
variable = pp
[]
[temperature]
type = ElementIntegralVariablePostprocessor
variable = T
[]
[density]
type = ElementIntegralMaterialProperty
mat_prop = 'PorousFlow_fluid_phase_density_qp0'
[]
[viscosity]
type = ElementIntegralMaterialProperty
mat_prop = 'PorousFlow_viscosity_qp0'
[]
[internal_energy]
type = ElementIntegralMaterialProperty
mat_prop = 'PorousFlow_fluid_phase_internal_energy_nodal0'
[]
[enthalpy]
type = ElementIntegralMaterialProperty
mat_prop = 'PorousFlow_fluid_phase_enthalpy_nodal0'
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
dt = 1
num_steps = 1
solve_type = Newton
# Avoids failing first time step in parallel
line_search = 'none'
nl_abs_tol = 1e-12
[]
[Outputs]
file_base = simple_fluid_yr_MPa_C_out
execute_on = 'timestep_end'
csv = true
[]
(modules/porous_flow/test/tests/sinks/s05.i)
# apply a half-gaussian sink flux and observe the correct behavior
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = 0
xmax = 1
ymin = 0
ymax = 1
zmin = 0
zmax = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1.1
[]
[]
[Variables]
[pp]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = y+1.4
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.3
density0 = 1.1
thermal_expansion = 0
viscosity = 1.1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-5 0 0 0 1E-5 0 0 0 1E-5'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[AuxVariables]
[flux_out]
[]
[]
[Postprocessors]
[flux10]
type = PointValue
variable = flux_out
point = '1 0 0'
[]
[p00]
type = PointValue
point = '0 0 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[p10]
type = PointValue
point = '1 0 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[m10]
type = ParsedPostprocessor
expression = 'vol*por*dens0*exp(p10/bulk)*if(p10>=0,1,pow(1+pow(-al*p10,1.0/(1-m)),-m))'
constant_names = 'vol por dens0 bulk al m'
constant_expressions = '0.25 0.1 1.1 1.3 1.1 0.5'
pp_names = 'p10'
execute_on = 'initial timestep_end'
[]
[dm10]
type = ChangeOverTimePostprocessor
postprocessor = m10
outputs = none
[]
[m10_prev]
type = ParsedPostprocessor
expression = 'm10 - dm10'
pp_names = 'm10 dm10'
outputs = 'console'
[]
[m10_rate]
type = ParsedPostprocessor
expression = 'if(p10>center,fcn,fcn*exp(-0.5*(p10-center)*(p10-center)/sd/sd))'
constant_names = 'fcn center sd'
constant_expressions = '6 0.9 0.5'
pp_names = 'p10'
[]
[m10_expect]
type = ParsedPostprocessor
expression = 'm10_prev-m10_rate*area*dt'
constant_names = 'area dt'
constant_expressions = '0.5 2E-3'
pp_names = 'm10_prev m10_rate'
[]
[p01]
type = PointValue
point = '0 1 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[p11]
type = PointValue
point = '1 1 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[m11]
type = ParsedPostprocessor
expression = 'vol*por*dens0*exp(p11/bulk)*if(p11>=0,1,pow(1+pow(-al*p11,1.0/(1-m)),-m))'
constant_names = 'vol por dens0 bulk al m'
constant_expressions = '0.25 0.1 1.1 1.3 1.1 0.5'
pp_names = 'p11'
execute_on = 'initial timestep_end'
[]
[dm11]
type = ChangeOverTimePostprocessor
postprocessor = m11
outputs = none
[]
[m11_prev]
type = ParsedPostprocessor
expression = 'm11 - dm11'
pp_names = 'm11 dm11'
outputs = 'console'
[]
[m11_rate]
type = ParsedPostprocessor
expression = 'if(p11>center,fcn,fcn*exp(-0.5*(p11-center)*(p11-center)/sd/sd))'
constant_names = 'fcn center sd'
constant_expressions = '6 0.9 0.5'
pp_names = 'p11'
[]
[m11_expect]
type = ParsedPostprocessor
expression = 'm11_prev-m11_rate*area*dt'
constant_names = 'area dt'
constant_expressions = '0.5 2E-3'
pp_names = 'm11_prev m11_rate'
[]
[]
[BCs]
[flux]
type = PorousFlowHalfGaussianSink
boundary = 'right'
max = 6
sd = 0.5
center = 0.9
variable = pp
use_mobility = false
use_relperm = false
fluid_phase = 0
flux_function = 1
save_in = flux_out
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_max_it -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu 10000 NONZERO 2'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 2E-3
end_time = 6E-2
nl_rel_tol = 1E-12
nl_abs_tol = 1E-12
[]
[Outputs]
file_base = s05
[console]
type = Console
execute_on = 'nonlinear linear'
time_step_interval = 5
[]
[csv]
type = CSV
execute_on = 'timestep_end'
time_step_interval = 3
[]
[]
(modules/porous_flow/test/tests/infiltration_and_drainage/rd02.i)
[Mesh]
type = GeneratedMesh
dim = 2
nx = 120
ny = 1
xmin = 0
xmax = 6
ymin = 0
ymax = 0.05
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Functions]
[dts]
type = PiecewiseLinear
y = '1E-2 1 10 500 5000 50000'
x = '0 10 100 1000 10000 500000'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = pressure
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.336
alpha = 1.43e-4
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e7
viscosity = 1.01e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[massfrac]
type = PorousFlowMassFraction
[]
[temperature]
type = PorousFlowTemperature
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pressure
capillary_pressure = pc
[]
[relperm]
type = PorousFlowRelativePermeabilityVG
m = 0.336
seff_turnover = 0.99
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.33
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0.295E-12 0 0 0 0.295E-12 0 0 0 0.295E-12'
[]
[]
[Variables]
[pressure]
initial_condition = 0.0
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pressure
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pressure
gravity = '-10 0 0'
[]
[]
[AuxVariables]
[SWater]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[SWater]
type = MaterialStdVectorAux
property = PorousFlow_saturation_qp
index = 0
variable = SWater
[]
[]
[BCs]
[base]
type = DirichletBC
boundary = left
value = 0.0
variable = pressure
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu NONZERO 2 1E-10 1E-10 10'
[]
[]
[VectorPostprocessors]
[swater]
type = LineValueSampler
warn_discontinuous_face_values = false
variable = SWater
start_point = '0 0 0'
end_point = '6 0 0'
sort_by = x
num_points = 121
execute_on = timestep_end
[]
[]
[Executioner]
type = Transient
solve_type = Newton
petsc_options = '-snes_converged_reason'
end_time = 345600
[TimeStepper]
type = FunctionDT
function = dts
[]
[]
[Outputs]
file_base = rd02
[exodus]
type = Exodus
execute_on = 'initial final'
[]
[along_line]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/examples/restart/gas_injection.i)
# Using the results from the equilibrium run to provide the initial condition for
# porepressure, we now inject a gas phase into the brine-saturated reservoir. In this
# example, where the mesh used is identical to the mesh used in gravityeq.i, we can use
# the basic restart capability by simply setting the initial condition for porepressure
# using the results from gravityeq.i.
#
# Even though the gravity equilibrium is established using a 2D mesh, in this example,
# we shift the mesh 0.1 m to the right and rotate it about the Y axis to make a 2D radial
# model.
#
# Methane injection takes place over the surface of the hole created by rotating the mesh,
# and hence the injection area is 2 pi r h. We can calculate this using an AreaPostprocessor,
# and then use this in a ParsedFunction to calculate the injection rate so that 10 kg/s of
# methane is injected.
#
# Results can be improved by uniformly refining the initial mesh.
#
# Note: as this example uses the results from a previous simulation, gravityeq.i MUST be
# run before running this input file.
[Mesh]
uniform_refine = 1
[file]
type = FileMeshGenerator
file = gravityeq_out.e
[]
[translate]
type = TransformGenerator
transform = TRANSLATE
vector_value = '0.1 0 0'
input = file
[]
coord_type = RZ
rz_coord_axis = Y
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 -9.81 0'
temperature_unit = Celsius
[]
[Variables]
[pp_liq]
initial_from_file_var = porepressure
[]
[sat_gas]
initial_condition = 0
[]
[]
[AuxVariables]
[temperature]
initial_condition = 50
[]
[xnacl]
initial_condition = 0.1
[]
[brine_density]
family = MONOMIAL
order = CONSTANT
[]
[methane_density]
family = MONOMIAL
order = CONSTANT
[]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[pp_gas]
family = MONOMIAL
order = CONSTANT
[]
[sat_liq]
family = MONOMIAL
order = CONSTANT
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pp_liq
[]
[flux0]
type = PorousFlowAdvectiveFlux
variable = pp_liq
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = sat_gas
fluid_component = 1
[]
[flux1]
type = PorousFlowAdvectiveFlux
variable = sat_gas
fluid_component = 1
[]
[]
[AuxKernels]
[brine_density]
type = PorousFlowPropertyAux
property = density
variable = brine_density
execute_on = 'initial timestep_end'
[]
[methane_density]
type = PorousFlowPropertyAux
property = density
variable = methane_density
phase = 1
execute_on = 'initial timestep_end'
[]
[pp_gas]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = pp_gas
execute_on = 'initial timestep_end'
[]
[sat_liq]
type = PorousFlowPropertyAux
property = saturation
variable = sat_liq
execute_on = 'initial timestep_end'
[]
[]
[BCs]
[gas_injection]
type = PorousFlowSink
boundary = left
variable = sat_gas
flux_function = injection_rate
fluid_phase = 1
[]
[brine_out]
type = PorousFlowPiecewiseLinearSink
boundary = right
variable = pp_liq
multipliers = '0 1e9'
pt_vals = '0 1e9'
fluid_phase = 0
flux_function = 1e-6
use_mobility = true
[]
[]
[Functions]
[injection_rate]
type = ParsedFunction
symbol_values = injection_area
symbol_names = area
expression = '-10/area'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp_liq sat_gas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1e-5
m = 0.5
sat_lr = 0.2
[]
[]
[FluidProperties]
[brine]
type = BrineFluidProperties
[]
[methane]
type = MethaneFluidProperties
[]
[methane_tab]
type = TabulatedBicubicFluidProperties
fp = methane
save_file = false
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temperature
[]
[ps]
type = PorousFlow2PhasePS
phase0_porepressure = pp_liq
phase1_saturation = sat_gas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[brine]
type = PorousFlowBrine
compute_enthalpy = false
compute_internal_energy = false
xnacl = xnacl
phase = 0
[]
[methane]
type = PorousFlowSingleComponentFluid
compute_enthalpy = false
compute_internal_energy = false
fp = methane_tab
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-13 0 0 0 1e-13 0 0 0 1e-13'
[]
[relperm_liq]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.2
sum_s_res = 0.3
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
s_res = 0.1
sum_s_res = 0.3
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = ' asm lu NONZERO'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1e8
nl_abs_tol = 1e-12
nl_rel_tol = 1e-06
nl_max_its = 20
dtmax = 1e6
[TimeStepper]
type = IterationAdaptiveDT
dt = 1e1
[]
[]
[Postprocessors]
[mass_ph0]
type = PorousFlowFluidMass
fluid_component = 0
execute_on = 'initial timestep_end'
[]
[mass_ph1]
type = PorousFlowFluidMass
fluid_component = 1
execute_on = 'initial timestep_end'
[]
[injection_area]
type = AreaPostprocessor
boundary = left
execute_on = initial
[]
[]
[Outputs]
execute_on = 'initial timestep_end'
exodus = true
perf_graph = true
checkpoint = true
[]
(modules/porous_flow/test/tests/jacobian/linear_por.i)
# Testing Jacobian resulting from PorousFlowPorosityLinear in a THM situation
[GlobalParams]
PorousFlowDictator = dictator
strain_at_nearest_qp = true
[]
[Mesh]
[gmg]
type = GeneratedMeshGenerator
dim = 3
[]
[]
[Variables]
[pp]
initial_condition = 1
[]
[T]
initial_condition = 2
[]
[disp]
[]
[]
[ICs]
[disp]
type = FunctionIC
variable = disp
function = '3 * x'
[]
[]
[BCs]
[disp]
type = FunctionDirichletBC
boundary = 'left right top bottom front back'
variable = disp
function = '3 * x'
[]
[]
[PorousFlowFullySaturated]
coupling_type = ThermoHydroMechanical
fp = simple_fluid
porepressure = pp
temperature = T
displacements = 'disp disp disp'
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosityLinear
porosity_ref = 0.5
P_ref = 0.5
P_coeff = 1.0
T_ref = -3.0
T_coeff = 1.0
epv_ref = 2.5
epv_coeff = 1.0
[]
[perm]
type = PorousFlowPermeabilityConst
permeability = '0 0 0 0 0 0 0 0 0'
[]
[matrix_energy]
type = PorousFlowMatrixInternalEnergy
density = 0.0
specific_heat_capacity = 0.0
[]
[thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '0 0 0 0 0 0 0 0 0'
[]
[density]
type = GenericConstantMaterial
prop_names = density
prop_values = 0.0
[]
[elasticity]
type = ComputeIsotropicElasticityTensor
youngs_modulus = 1E-99
poissons_ratio = 0
[]
[strain]
type = ComputeSmallStrain
displacements = 'disp disp disp'
[]
[stress]
type = ComputeLinearElasticStress
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
num_steps = 1
# petsc_options = '-snes_test_jacobian -snes_force_iteration'
# petsc_options_iname = '-snes_type --ksp_type -pc_type -snes_convergence_test'
# petsc_options_value = ' ksponly preonly none skip'
[]
(modules/porous_flow/test/tests/sinks/outflow_except2.i)
# Exception testing of PorousFlowOutflowBC. Note that this input file will produce an error message
[Mesh]
type = GeneratedMesh
dim = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
number_fluid_components = 1
number_fluid_phases = 1
porous_flow_vars = pp
[]
[]
[Variables]
[pp]
[]
[]
[Kernels]
[dummy]
type = Diffusion
variable = pp
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
[]
[]
[Materials]
[ppss]
type = PorousFlow1PhaseFullySaturated
porepressure = pp
[]
[fluid_props]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[relperm]
type = PorousFlowRelativePermeabilityConst
phase = 0
[]
[massfrac]
type = PorousFlowMassFraction
[]
[temperature]
type = PorousFlowTemperature
temperature = 1
[]
[thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '1 0 0 0 1 0 0 0 1'
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0.4 0 0 0 0.4 0 0 0 0.4'
[]
[]
[BCs]
[outflow]
type = PorousFlowOutflowBC
boundary = left
variable = pp
[]
[]
[Executioner]
type = Transient
dt = 1
num_steps = 1
[]
(modules/porous_flow/test/tests/jacobian/fflux04.i)
# 2phase (PP), 3components (that exist in both phases), constant viscosity, constant insitu permeability
# density with constant bulk, Corey relative perm, nonzero gravity, unsaturated with vanGenuchten
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[massfrac_ph0_sp0]
[]
[]
[AuxVariables]
[massfrac_ph0_sp1]
[]
[massfrac_ph1_sp0]
[]
[massfrac_ph1_sp1]
[]
[]
[ICs]
[ppwater]
type = RandomIC
variable = ppwater
min = -1
max = 0
[]
[ppgas]
type = RandomIC
variable = ppgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 0.4
[]
[massfrac_ph0_sp1]
type = RandomIC
variable = massfrac_ph0_sp1
min = 0
max = 0.4
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 0.4
[]
[massfrac_ph1_sp1]
type = RandomIC
variable = massfrac_ph1_sp1
min = 0
max = 0.4
[]
[]
[Kernels]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = ppwater
gravity = '-1 -0.1 0'
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = ppgas
gravity = '-1 -0.1 0'
[]
[flux2]
type = PorousFlowAdvectiveFlux
fluid_component = 2
variable = massfrac_ph0_sp0
gravity = '-1 -0.1 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas massfrac_ph0_sp0'
number_fluid_phases = 2
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph0_sp1 massfrac_ph1_sp0 massfrac_ph1_sp1'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/poro_elasticity/mandel_fully_saturated_volume.i)
# Mandel's problem of consolodation of a drained medium
# Using the FullySaturatedDarcyBase and FullySaturatedFullySaturatedMassTimeDerivative kernels
# with multiply_by_density = false, so that this problem becomes linear
#
# A sample is in plane strain.
# -a <= x <= a
# -b <= y <= b
# It is squashed with constant force by impermeable, frictionless plattens on its top and bottom surfaces (at y=+/-b)
# Fluid is allowed to leak out from its sides (at x=+/-a)
# The porepressure within the sample is monitored.
#
# As is common in the literature, this is simulated by
# considering the quarter-sample, 0<=x<=a and 0<=y<=b, with
# impermeable, roller BCs at x=0 and y=0 and y=b.
# Porepressure is fixed at zero on x=a.
# Porepressure and displacement are initialised to zero.
# Then the top (y=b) is moved downwards with prescribed velocity,
# so that the total force that is inducing this downwards velocity
# is fixed. The velocity is worked out by solving Mandel's problem
# analytically, and the total force is monitored in the simulation
# to check that it indeed remains constant.
#
# Here are the problem's parameters, and their values:
# Soil width. a = 1
# Soil height. b = 0.1
# Soil's Lame lambda. la = 0.5
# Soil's Lame mu, which is also the Soil's shear modulus. mu = G = 0.75
# Soil bulk modulus. K = la + 2*mu/3 = 1
# Drained Poisson ratio. nu = (3K - 2G)/(6K + 2G) = 0.2
# Soil bulk compliance. 1/K = 1
# Fluid bulk modulus. Kf = 8
# Fluid bulk compliance. 1/Kf = 0.125
# Soil initial porosity. phi0 = 0.1
# Biot coefficient. alpha = 0.6
# Biot modulus. M = 1/(phi0/Kf + (alpha - phi0)(1 - alpha)/K) = 4.705882
# Undrained bulk modulus. Ku = K + alpha^2*M = 2.694118
# Undrained Poisson ratio. nuu = (3Ku - 2G)/(6Ku + 2G) = 0.372627
# Skempton coefficient. B = alpha*M/Ku = 1.048035
# Fluid mobility (soil permeability/fluid viscosity). k = 1.5
# Consolidation coefficient. c = 2*k*B^2*G*(1-nu)*(1+nuu)^2/9/(1-nuu)/(nuu-nu) = 3.821656
# Normal stress on top. F = 1
#
# The solution for porepressure and displacements is given in
# AHD Cheng and E Detournay "A direct boundary element method for plane strain poroelasticity" International Journal of Numerical and Analytical Methods in Geomechanics 12 (1988) 551-572.
# The solution involves complicated infinite series, so I shall not write it here
[Mesh]
type = GeneratedMesh
dim = 3
nx = 10
ny = 1
nz = 1
xmin = 0
xmax = 1
ymin = 0
ymax = 0.1
zmin = 0
zmax = 1
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
PorousFlowDictator = dictator
block = 0
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure disp_x disp_y disp_z'
number_fluid_phases = 1
number_fluid_components = 1
[]
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[porepressure]
[]
[]
[BCs]
[roller_xmin]
type = DirichletBC
variable = disp_x
value = 0
boundary = 'left'
[]
[roller_ymin]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'bottom'
[]
[plane_strain]
type = DirichletBC
variable = disp_z
value = 0
boundary = 'back front'
[]
[xmax_drained]
type = DirichletBC
variable = porepressure
value = 0
boundary = right
[]
[top_velocity]
type = FunctionDirichletBC
variable = disp_y
function = top_velocity
boundary = top
[]
[]
[Functions]
[top_velocity]
type = PiecewiseLinear
x = '0 0.002 0.006 0.014 0.03 0.046 0.062 0.078 0.094 0.11 0.126 0.142 0.158 0.174 0.19 0.206 0.222 0.238 0.254 0.27 0.286 0.302 0.318 0.334 0.35 0.366 0.382 0.398 0.414 0.43 0.446 0.462 0.478 0.494 0.51 0.526 0.542 0.558 0.574 0.59 0.606 0.622 0.638 0.654 0.67 0.686 0.702'
y = '-0.041824842 -0.042730269 -0.043412712 -0.04428867 -0.045509181 -0.04645965 -0.047268246 -0.047974749 -0.048597109 -0.0491467 -0.049632388 -0.050061697 -0.050441198 -0.050776675 -0.051073238 -0.0513354 -0.051567152 -0.051772022 -0.051953128 -0.052113227 -0.052254754 -0.052379865 -0.052490464 -0.052588233 -0.052674662 -0.052751065 -0.052818606 -0.052878312 -0.052931093 -0.052977751 -0.053018997 -0.053055459 -0.053087691 -0.053116185 -0.053141373 -0.05316364 -0.053183324 -0.053200724 -0.053216106 -0.053229704 -0.053241725 -0.053252351 -0.053261745 -0.053270049 -0.053277389 -0.053283879 -0.053289615'
[]
[]
[AuxVariables]
[stress_yy]
order = CONSTANT
family = MONOMIAL
[]
[tot_force]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
[]
[tot_force]
type = ParsedAux
coupled_variables = 'stress_yy porepressure'
execute_on = timestep_end
variable = tot_force
expression = '-stress_yy+0.6*porepressure'
[]
[]
[Kernels]
[grad_stress_x]
type = StressDivergenceTensors
variable = disp_x
component = 0
[]
[grad_stress_y]
type = StressDivergenceTensors
variable = disp_y
component = 1
[]
[grad_stress_z]
type = StressDivergenceTensors
variable = disp_z
component = 2
[]
[poro_x]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.6
variable = disp_x
component = 0
[]
[poro_y]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.6
variable = disp_y
component = 1
[]
[poro_z]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.6
component = 2
variable = disp_z
[]
[mass0]
type = PorousFlowFullySaturatedMassTimeDerivative
biot_coefficient = 0.6
multiply_by_density = false
coupling_type = HydroMechanical
variable = porepressure
[]
[flux]
type = PorousFlowFullySaturatedDarcyBase
multiply_by_density = false
variable = porepressure
gravity = '0 0 0'
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 8
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '0.5 0.75'
# bulk modulus is lambda + 2*mu/3 = 0.5 + 2*0.75/3 = 1
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[eff_fluid_pressure_qp]
type = PorousFlowEffectiveFluidPressure
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[ppss]
type = PorousFlow1PhaseFullySaturated
porepressure = porepressure
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid_qp]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst # only the initial value of this is ever used
porosity = 0.1
[]
[biot_modulus]
type = PorousFlowConstantBiotModulus
biot_coefficient = 0.6
solid_bulk_compliance = 1
fluid_bulk_modulus = 8
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.5 0 0 0 1.5 0 0 0 1.5'
[]
[]
[Postprocessors]
[p0]
type = PointValue
outputs = csv
point = '0.0 0 0'
variable = porepressure
[]
[p1]
type = PointValue
outputs = csv
point = '0.1 0 0'
variable = porepressure
[]
[p2]
type = PointValue
outputs = csv
point = '0.2 0 0'
variable = porepressure
[]
[p3]
type = PointValue
outputs = csv
point = '0.3 0 0'
variable = porepressure
[]
[p4]
type = PointValue
outputs = csv
point = '0.4 0 0'
variable = porepressure
[]
[p5]
type = PointValue
outputs = csv
point = '0.5 0 0'
variable = porepressure
[]
[p6]
type = PointValue
outputs = csv
point = '0.6 0 0'
variable = porepressure
[]
[p7]
type = PointValue
outputs = csv
point = '0.7 0 0'
variable = porepressure
[]
[p8]
type = PointValue
outputs = csv
point = '0.8 0 0'
variable = porepressure
[]
[p9]
type = PointValue
outputs = csv
point = '0.9 0 0'
variable = porepressure
[]
[p99]
type = PointValue
outputs = csv
point = '1 0 0'
variable = porepressure
[]
[xdisp]
type = PointValue
outputs = csv
point = '1 0.1 0'
variable = disp_x
[]
[ydisp]
type = PointValue
outputs = csv
point = '1 0.1 0'
variable = disp_y
[]
[total_downwards_force]
type = ElementAverageValue
outputs = csv
variable = tot_force
[]
[dt]
type = FunctionValuePostprocessor
outputs = console
function = if(0.15*t<0.01,0.15*t,0.01)
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu 1E-14 1E-10 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
start_time = 0
end_time = 0.7
[TimeStepper]
type = PostprocessorDT
postprocessor = dt
dt = 0.001
[]
[]
[Outputs]
execute_on = 'timestep_end'
file_base = mandel_fully_saturated_volume
[csv]
time_step_interval = 3
type = CSV
[]
[]
(modules/porous_flow/test/tests/poro_elasticity/pp_generation_action.i)
# Same as pp_generation.i, but using an Action
#
# A sample is constrained on all sides and its boundaries are
# also impermeable. Fluid is pumped into the sample via a
# volumetric source (ie kg/second per cubic meter), and the
# rise in porepressure is observed.
#
# Source = s (units = kg/m^3/second)
#
# Expect:
# fluid_mass = mass0 + s*t
# stress = 0 (remember this is effective stress)
# Porepressure = fluid_bulk*log(fluid_mass_density/density_P0), where fluid_mass_density = fluid_mass*porosity
# porosity = biot+(phi0-biot)*exp(pp(biot-1)/solid_bulk)
#
# Parameters:
# Biot coefficient = 0.3
# Phi0 = 0.1
# Solid Bulk modulus = 2
# fluid_bulk = 13
# density_P0 = 1
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -0.5
xmax = 0.5
ymin = -0.5
ymax = 0.5
zmin = -0.5
zmax = 0.5
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
PorousFlowDictator = dictator
block = 0
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[porepressure]
[]
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
thermal_expansion = 0.0
bulk_modulus = 13.0
viscosity = 1.0
density0 = 1.0
[]
[]
[PorousFlowUnsaturated]
coupling_type = HydroMechanical
displacements = 'disp_x disp_y disp_z'
porepressure = porepressure
biot_coefficient = 0.3
gravity = '0 0 0'
fp = the_simple_fluid
van_genuchten_alpha = 1.0
van_genuchten_m = 0.8
relative_permeability_type = Corey
relative_permeability_exponent = 0.0
save_component_rate_in = nodal_kg_per_s
[]
[BCs]
[confinex]
type = DirichletBC
variable = disp_x
value = 0
boundary = 'left right'
[]
[confiney]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'bottom top'
[]
[confinez]
type = DirichletBC
variable = disp_z
value = 0
boundary = 'back front'
[]
[]
[Kernels]
[source]
type = BodyForce
function = 0.1
variable = porepressure
[]
[]
[AuxVariables]
[porosity]
order = CONSTANT
family = MONOMIAL
[]
[nodal_kg_per_s]
[]
[]
[AuxKernels]
[porosity]
type = PorousFlowPropertyAux
variable = porosity
property = porosity
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '1 1.5'
# bulk modulus is lambda + 2*mu/3 = 1 + 2*1.5/3 = 2
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[porosity]
type = PorousFlowPorosity
fluid = true
mechanical = true
porosity_zero = 0.1
biot_coefficient = 0.3
solid_bulk = 2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 1 0 0 0 1' # unimportant
[]
[]
[Functions]
[porosity_analytic]
type = ParsedFunction
expression = 'biot+(phi0-biot)*exp(pp*(biot-1)/bulk)'
symbol_names = 'biot phi0 pp bulk'
symbol_values = '0.3 0.1 p0 2'
[]
[]
[Postprocessors]
[nodal_kg_per_s]
type = PointValue
outputs = csv
point = '0 0 0'
variable = nodal_kg_per_s
[]
[fluid_mass]
type = PorousFlowFluidMass
fluid_component = 0
execute_on = 'initial timestep_end'
[]
[porosity]
type = PointValue
outputs = 'console csv'
point = '0 0 0'
variable = porosity
[]
[p0]
type = PointValue
outputs = csv
point = '0 0 0'
variable = porepressure
[]
[porosity_analytic]
type = FunctionValuePostprocessor
function = porosity_analytic
[]
[zdisp]
type = PointValue
outputs = csv
point = '0 0 0.5'
variable = disp_z
[]
[stress_xx]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_xx
[]
[stress_yy]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_yy
[]
[stress_zz]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_zz
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-14 1E-10 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
start_time = 0
end_time = 10
dt = 1
[]
[Outputs]
execute_on = 'timestep_end'
file_base = pp_generation_action
csv = true
[]
(modules/porous_flow/examples/tutorial/05_tabulated.i)
# Darcy flow with heat advection and conduction, using Water97 properties
[Mesh]
[annular]
type = AnnularMeshGenerator
nr = 10
rmin = 1.0
rmax = 10
growth_r = 1.4
nt = 4
dmin = 0
dmax = 90
[]
[make3D]
type = MeshExtruderGenerator
extrusion_vector = '0 0 12'
num_layers = 3
bottom_sideset = 'bottom'
top_sideset = 'top'
input = annular
[]
[shift_down]
type = TransformGenerator
transform = TRANSLATE
vector_value = '0 0 -6'
input = make3D
[]
[aquifer]
type = SubdomainBoundingBoxGenerator
block_id = 1
bottom_left = '0 0 -2'
top_right = '10 10 2'
input = shift_down
[]
[injection_area]
type = ParsedGenerateSideset
combinatorial_geometry = 'x*x+y*y<1.01'
included_subdomains = 1
new_sideset_name = 'injection_area'
input = 'aquifer'
[]
[rename]
type = RenameBlockGenerator
old_block = '0 1'
new_block = 'caps aquifer'
input = 'injection_area'
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[porepressure]
initial_condition = 1E6
[]
[temperature]
initial_condition = 313
scaling = 1E-8
[]
[]
[PorousFlowBasicTHM]
porepressure = porepressure
temperature = temperature
coupling_type = ThermoHydro
gravity = '0 0 0'
fp = tabulated_water
[]
[BCs]
[constant_injection_porepressure]
type = DirichletBC
variable = porepressure
value = 2E6
boundary = injection_area
[]
[constant_injection_temperature]
type = DirichletBC
variable = temperature
value = 333
boundary = injection_area
[]
[]
[FluidProperties]
[true_water]
type = Water97FluidProperties
[]
[tabulated_water]
type = TabulatedFluidProperties
fp = true_water
temperature_min = 275
interpolated_properties = 'density viscosity enthalpy internal_energy'
fluid_property_output_file = water97_tabulated.csv
# Comment out the fp parameter and uncomment below to use the newly generated tabulation
# fluid_property_file = water97_tabulated.csv
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[biot_modulus]
type = PorousFlowConstantBiotModulus
biot_coefficient = 0.8
solid_bulk_compliance = 2E-7
fluid_bulk_modulus = 1E7
[]
[permeability_aquifer]
type = PorousFlowPermeabilityConst
block = aquifer
permeability = '1E-14 0 0 0 1E-14 0 0 0 1E-14'
[]
[permeability_caps]
type = PorousFlowPermeabilityConst
block = caps
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-16'
[]
[thermal_expansion]
type = PorousFlowConstantThermalExpansionCoefficient
biot_coefficient = 0.8
drained_coefficient = 0.003
fluid_coefficient = 0.0002
[]
[rock_internal_energy]
type = PorousFlowMatrixInternalEnergy
density = 2500.0
specific_heat_capacity = 1200.0
[]
[thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '10 0 0 0 10 0 0 0 10'
block = 'caps aquifer'
[]
[]
[Preconditioning]
active = basic
[basic]
type = SMP
full = true
petsc_options = '-ksp_diagonal_scale -ksp_diagonal_scale_fix'
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = ' asm lu NONZERO 2'
[]
[preferred_but_might_not_be_installed]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu mumps'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1E6
dt = 1E5
nl_abs_tol = 1E-10
[]
[Outputs]
exodus = true
[]
(modules/porous_flow/test/tests/hysteresis/hys_order_08.i)
# Test that PorousFlowHysteresisOrder correctly calculates hysteresis order
# Hysteresis order is initialised = 3, with turning points = (0.5, 0.8, 0.66)
# Initial saturation is 0.71
# A large amount of water is removed in one timestep so the saturation becomes 0.58 (and order = 0)
# Then, water is added to the system (order = 1, with turning point = 0.58) until saturation = 0.67
# Then, a large amount of water is removed from the system so order becomes 0
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = -9E5
[]
[]
[PorousFlowUnsaturated]
porepressure = pp
fp = simple_fluid
[]
[DiracKernels]
[source_sink_0]
type = PorousFlowPointSourceFromPostprocessor
point = '0 0 0'
mass_flux = sink_strength
variable = pp
[]
[source_sink_1]
type = PorousFlowPointSourceFromPostprocessor
point = '1 0 0'
mass_flux = sink_strength
variable = pp
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosityConst
porosity = 1.0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0 0 0 0 0 0 0 0 0'
[]
[hys_order]
type = PorousFlowHysteresisOrder
initial_order = 3
previous_turning_points = '0.6 0.8 0.66'
[]
[]
[AuxVariables]
[hys_order]
family = MONOMIAL
order = CONSTANT
[]
[tp0]
family = MONOMIAL
order = CONSTANT
[]
[tp1]
family = MONOMIAL
order = CONSTANT
[]
[tp2]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[hys_order]
type = PorousFlowPropertyAux
variable = hys_order
property = hysteresis_order
[]
[tp0]
type = PorousFlowPropertyAux
variable = tp0
property = hysteresis_saturation_turning_point
hysteresis_turning_point = 0
[]
[tp1]
type = PorousFlowPropertyAux
variable = tp1
property = hysteresis_saturation_turning_point
hysteresis_turning_point = 1
[]
[tp2]
type = PorousFlowPropertyAux
variable = tp2
property = hysteresis_saturation_turning_point
hysteresis_turning_point = 2
[]
[]
[Functions]
[sink_strength_fcn]
type = ParsedFunction
expression = '30 * if(t <= 1, -2, if(t <= 2, 1.5, -2))'
[]
[]
[Postprocessors]
[sink_strength]
type = FunctionValuePostprocessor
function = sink_strength_fcn
outputs = 'none'
[]
[saturation]
type = PointValue
point = '0 0 0'
variable = saturation0
[]
[hys_order]
type = PointValue
point = '0 0 0'
variable = hys_order
[]
[tp0]
type = PointValue
point = '0 0 0'
variable = tp0
[]
[tp1]
type = PointValue
point = '0 0 0'
variable = tp1
[]
[tp2]
type = PointValue
point = '0 0 0'
variable = tp2
[]
[]
[Preconditioning]
[basic]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 5
nl_abs_tol = 1E-7
[]
[Outputs]
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/energy_conservation/heat04_action.i)
# heat04, but using an action
#
# The sample is a single unit element, with fixed displacements on
# all sides. A heat source of strength S (J/m^3/s) is applied into
# the element. There is no fluid flow or heat flow. The rise
# in temperature, porepressure and stress, and the change in porosity is
# matched with theory.
#
# In this case, fluid mass must be conserved, and there is no
# volumetric strain, so
# porosity * fluid_density = constant
# Also, the energy-density in the rock-fluid system increases with S:
# d/dt [(1 - porosity) * rock_density * rock_heat_cap * T + porosity * fluid_density * fluid_heat_cap * T] = S
# Also, the porosity evolves according to THM as
# porosity = biot + (porosity0 - biot) * exp( (biot - 1) * P / fluid_bulk + rock_thermal_exp * T)
# Finally, the effective stress must be exactly zero (as there is
# no strain).
#
# Let us assume that
# fluid_density = dens0 * exp(P / fluid_bulk - fluid_thermal_exp * T)
# Then the conservation of fluid mass means
# porosity = por0 * exp(- P / fluid_bulk + fluid_thermal_exp * T)
# where dens0 * por0 = the initial fluid mass.
# The last expression for porosity, combined with the THM one,
# and assuming that biot = 1 for simplicity, gives
# porosity = 1 + (porosity0 - 1) * exp(rock_thermal_exp * T) = por0 * exp(- P / fluid_bulk + fluid_thermal_exp * T) .... (A)
#
# This stuff may be substituted into the heat energy-density equation:
# S = d/dt [(1 - porosity0) * exp(rock_thermal_exp * T) * rock_density * rock_heat_cap * T + porosity * fluid_density * fluid_heat_cap * T]
#
# If S is constant then
# S * t = (1 - porosity0) * exp(rock_thermal_exp * T) * rock_density * rock_heat_cap * T + porosity * fluid_density * fluid_heat_cap * T
# with T(t=0) = 0 then Eqn(A) implies that por0 = porosity0 and
# P / fluid_bulk = fluid_thermal_exp * T - log(1 + (por0 - 1) * exp(rock_thermal_exp * T)) + log(por0)
#
# Parameters:
# A = 2
# fluid_bulk = 2.0
# dens0 = 3.0
# fluid_thermal_exp = 0.5
# fluid_heat_cap = 2
# por0 = 0.5
# rock_thermal_exp = 0.25
# rock_density = 5
# rock_heat_capacity = 0.2
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -0.5
xmax = 0.5
ymin = -0.5
ymax = 0.5
zmin = -0.5
zmax = 0.5
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
thermal_expansion = 0.5
cv = 2
cp = 2
bulk_modulus = 2.0
density0 = 3.0
[]
[]
[PorousFlowUnsaturated]
coupling_type = ThermoHydroMechanical
displacements = 'disp_x disp_y disp_z'
porepressure = pp
temperature = temp
dictator_name = Sir
biot_coefficient = 1.0
gravity = '0 0 0'
fp = the_simple_fluid
van_genuchten_alpha = 1.0E-12
van_genuchten_m = 0.5
relative_permeability_type = Corey
relative_permeability_exponent = 0.0
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
PorousFlowDictator = Sir
block = 0
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[pp]
[]
[temp]
[]
[]
[BCs]
[confinex]
type = DirichletBC
variable = disp_x
value = 0
boundary = 'left right'
[]
[confiney]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'bottom top'
[]
[confinez]
type = DirichletBC
variable = disp_z
value = 0
boundary = 'back front'
[]
[]
[Kernels]
[heat_source]
type = BodyForce
function = 1
variable = temp
[]
[]
[Functions]
[err_T_fcn]
type = ParsedFunction
symbol_names = 'por0 rte temp rd rhc m0 fhc source'
symbol_values = '0.5 0.25 t0 5 0.2 1.5 2 1'
expression = '((1-por0)*exp(rte*temp)*rd*rhc*temp+m0*fhc*temp-source*t)/(source*t)'
[]
[err_pp_fcn]
type = ParsedFunction
symbol_names = 'por0 rte temp rd rhc m0 fhc source bulk pp fte'
symbol_values = '0.5 0.25 t0 5 0.2 1.5 2 1 2 p0 0.5'
expression = '(bulk*(fte*temp-log(1+(por0-1)*exp(rte*temp))+log(por0))-pp)/pp'
[]
[]
[AuxVariables]
[porosity]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[porosity]
type = PorousFlowPropertyAux
property = porosity
variable = porosity
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '1 1.5'
# bulk modulus is lambda + 2*mu/3 = 1 + 2*1.5/3 = 2
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[porosity]
type = PorousFlowPorosity
thermal = true
fluid = true
mechanical = true
ensure_positive = false
biot_coefficient = 1.0
porosity_zero = 0.5
thermal_expansion_coeff = 0.25
solid_bulk = 2
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 0.2
density = 5.0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0 0 0 0 0 0 0 0 0'
[]
[thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '0 0 0 0 0 0 0 0 0'
[]
[]
[Postprocessors]
[p0]
type = PointValue
outputs = 'console csv'
execute_on = 'timestep_end'
point = '0 0 0'
variable = pp
[]
[t0]
type = PointValue
outputs = 'console csv'
execute_on = 'timestep_end'
point = '0 0 0'
variable = temp
[]
[porosity]
type = PointValue
outputs = 'console csv'
execute_on = 'timestep_end'
point = '0 0 0'
variable = porosity
[]
[stress_xx]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_xx
[]
[stress_yy]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_yy
[]
[stress_zz]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_zz
[]
[fluid_mass]
type = PorousFlowFluidMass
fluid_component = 0
execute_on = 'timestep_end'
outputs = 'console csv'
[]
[total_heat]
type = PorousFlowHeatEnergy
phase = 0
execute_on = 'timestep_end'
outputs = 'console csv'
[]
[err_T]
type = FunctionValuePostprocessor
function = err_T_fcn
[]
[err_P]
type = FunctionValuePostprocessor
function = err_pp_fcn
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-12 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 5
[]
[Outputs]
execute_on = 'initial timestep_end'
file_base = heat04_action
csv = true
[]
(modules/porous_flow/test/tests/jacobian/diff01.i)
# Test the Jacobian of the diffusive component of the PorousFlowDisperiveFlux kernel.
# By setting disp_long and disp_trans to zero, the purely diffusive component of the flux
# can be isolated.
[Mesh]
type = GeneratedMesh
dim = 2
nx = 3
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[massfrac0]
[]
[]
[ICs]
[pp]
type = RandomIC
variable = pp
max = 2e1
min = 1e1
[]
[massfrac0]
type = RandomIC
variable = massfrac0
min = 0
max = 1
[]
[]
[Kernels]
[diff0]
type = PorousFlowDispersiveFlux
fluid_component = 0
variable = pp
gravity = '1 0 0'
disp_long = 0
disp_trans = 0
[]
[diff1]
type = PorousFlowDispersiveFlux
fluid_component = 1
variable = massfrac0
gravity = '1 0 0'
disp_long = 0
disp_trans = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp massfrac0'
number_fluid_phases = 1
number_fluid_components = 2
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1e7
density0 = 10
thermal_expansion = 0
viscosity = 1
[]
[]
[Materials]
[temp]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseFullySaturated
porepressure = pp
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac0'
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[poro]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[diff]
type = PorousFlowDiffusivityConst
diffusion_coeff = '1e-2 1e-1'
tortuosity = '0.1'
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = PorousFlowRelativePermeabilityConst
phase = 0
[]
[]
[Preconditioning]
active = smp
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/dirackernels/bh_except07.i)
# PorousFlowPeacemanBorehole exception test
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = TimeDerivative
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
bottom_p_or_t = 0
fluid_phase = 0
point_file = bh02.bh
use_mobility = true
SumQuantityUO = borehole_total_outflow_mass
variable = pp
unit_weight = '0 0 0'
character = 1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
expression = abs((a-c+d)/2/(a+c))
symbol_names = 'a c d'
symbol_values = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
(modules/porous_flow/examples/tidal/atm_tides.i)
# A 10m x 10m "column" of height 100m is subjected to cyclic pressure at its top
# Assumptions:
# the boundaries are impermeable, except the top boundary
# only vertical displacement is allowed
# the atmospheric pressure sets the total stress at the top of the model
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 10
xmin = 0
xmax = 10
ymin = 0
ymax = 10
zmin = -100
zmax = 0
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
PorousFlowDictator = dictator
block = 0
biot_coefficient = 0.6
multiply_by_density = false
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[porepressure]
scaling = 1E11
[]
[]
[ICs]
[porepressure]
type = FunctionIC
variable = porepressure
function = '-10000*z' # approximately correct
[]
[]
[Functions]
[ini_stress_zz]
type = ParsedFunction
expression = '(25000 - 0.6*10000)*z' # remember this is effective stress
[]
[cyclic_porepressure]
type = ParsedFunction
expression = 'if(t>0,5000 * sin(2 * pi * t / 3600.0 / 24.0),0)'
[]
[neg_cyclic_porepressure]
type = ParsedFunction
expression = '-if(t>0,5000 * sin(2 * pi * t / 3600.0 / 24.0),0)'
[]
[]
[BCs]
# zmin is called 'back'
# zmax is called 'front'
# ymin is called 'bottom'
# ymax is called 'top'
# xmin is called 'left'
# xmax is called 'right'
[no_x_disp]
type = DirichletBC
variable = disp_x
value = 0
boundary = 'bottom top' # because of 1-element meshing, this fixes u_x=0 everywhere
[]
[no_y_disp]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'bottom top' # because of 1-element meshing, this fixes u_y=0 everywhere
[]
[no_z_disp_at_bottom]
type = DirichletBC
variable = disp_z
value = 0
boundary = back
[]
[pp]
type = FunctionDirichletBC
variable = porepressure
function = cyclic_porepressure
boundary = front
[]
[total_stress_at_top]
type = FunctionNeumannBC
variable = disp_z
function = neg_cyclic_porepressure
boundary = front
[]
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
thermal_expansion = 0.0
bulk_modulus = 2E9
viscosity = 1E-3
density0 = 1000.0
[]
[]
[PorousFlowBasicTHM]
coupling_type = HydroMechanical
displacements = 'disp_x disp_y disp_z'
porepressure = porepressure
gravity = '0 0 -10'
fp = the_simple_fluid
[]
[Materials]
[elasticity_tensor]
type = ComputeIsotropicElasticityTensor
bulk_modulus = 10.0E9 # drained bulk modulus
poissons_ratio = 0.25
[]
[strain]
type = ComputeSmallStrain
eigenstrain_names = ini_stress
[]
[stress]
type = ComputeLinearElasticStress
[]
[ini_stress]
type = ComputeEigenstrainFromInitialStress
initial_stress = '0 0 0 0 0 0 0 0 ini_stress_zz'
eigenstrain_name = ini_stress
[]
[porosity]
type = PorousFlowPorosityConst # only the initial value of this is ever used
porosity = 0.1
[]
[biot_modulus]
type = PorousFlowConstantBiotModulus
solid_bulk_compliance = 1E-10
fluid_bulk_modulus = 2E9
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-14'
[]
[density]
type = GenericConstantMaterial
prop_names = density
prop_values = 2500.0
[]
[]
[Postprocessors]
[p0]
type = PointValue
outputs = csv
point = '0 0 0'
variable = porepressure
[]
[uz0]
type = PointValue
outputs = csv
point = '0 0 0'
variable = disp_z
[]
[p100]
type = PointValue
outputs = csv
point = '0 0 -100'
variable = porepressure
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
start_time = -3600 # so postprocessors get recorded correctly at t=0
dt = 3600
end_time = 360000
nl_abs_tol = 5E-7
nl_rel_tol = 1E-10
[]
[Outputs]
csv = true
[]
(modules/porous_flow/test/tests/jacobian/pls02.i)
# PorousFlowPiecewiseLinearSink with 2-phase, 2-components
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 3
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[massfrac_ph0_sp0]
[]
[massfrac_ph1_sp0]
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas massfrac_ph0_sp0 massfrac_ph1_sp0'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[ICs]
[ppwater]
type = RandomIC
variable = ppwater
min = -1
max = 0
[]
[ppgas]
type = RandomIC
variable = ppgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 1
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 1
[]
[]
[Kernels]
[dummy_ppwater]
type = TimeDerivative
variable = ppwater
[]
[dummy_ppgas]
type = TimeDerivative
variable = ppgas
[]
[dummy_m00]
type = TimeDerivative
variable = massfrac_ph0_sp0
[]
[dummy_m10]
type = TimeDerivative
variable = massfrac_ph1_sp0
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1.4
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[]
[BCs]
[flux_w]
type = PorousFlowPiecewiseLinearSink
boundary = 'left'
pt_vals = '-1 -0.5 0'
multipliers = '1 2 4'
variable = ppwater
mass_fraction_component = 0
fluid_phase = 0
use_relperm = true
use_mobility = true
flux_function = 'x*y'
[]
[flux_g]
type = PorousFlowPiecewiseLinearSink
boundary = 'top'
pt_vals = '0 0.5 1'
multipliers = '1 -2 4'
mass_fraction_component = 0
variable = ppgas
fluid_phase = 1
use_relperm = true
use_mobility = true
flux_function = '-x*y'
[]
[flux_1]
type = PorousFlowPiecewiseLinearSink
boundary = 'right'
pt_vals = '0 0.5 1'
multipliers = '1 3 4'
mass_fraction_component = 1
variable = massfrac_ph0_sp0
fluid_phase = 0
use_relperm = true
use_mobility = true
[]
[flux_2]
type = PorousFlowPiecewiseLinearSink
boundary = 'back top'
pt_vals = '0 0.5 1'
multipliers = '0 1 -3'
mass_fraction_component = 1
variable = massfrac_ph1_sp0
fluid_phase = 1
use_relperm = true
use_mobility = true
flux_function = '0.5*x*y'
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 2
[]
[Outputs]
file_base = pls02
[]
(modules/porous_flow/test/tests/gravity/grav01b.i)
# Checking that gravity head is established
# 1phase, vanGenuchten, constant and large fluid-bulk, constant viscosity, constant permeability, Corey relperm
# fully saturated
# For better agreement with the analytical solution (ana_pp), just increase nx
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
xmin = -1
xmax = 0
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[InitialCondition]
type = RandomIC
min = 0
max = 1
[]
[]
[]
[Kernels]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
gravity = '-1 0 0'
[]
[]
[Functions]
[ana_pp]
type = ParsedFunction
symbol_names = 'g B p0 rho0'
symbol_values = '1 1E3 0 1'
expression = '-B*log(exp(-p0/B)+g*rho0*x/B)' # expected pp at base
[]
[]
[BCs]
[z]
type = DirichletBC
variable = pp
boundary = right
value = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1e3
density0 = 1
viscosity = 1
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[]
[Postprocessors]
[pp_base]
type = PointValue
variable = pp
point = '-1 0 0'
[]
[pp_analytical]
type = FunctionValuePostprocessor
function = ana_pp
point = '-1 0 0'
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Steady
solve_type = Newton
[]
[Outputs]
execute_on = 'timestep_end'
file_base = grav01b
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/fluidstate/theis_tabulated.i)
# Two phase Theis problem: Flow from single source using WaterNCG fluidstate.
# Constant rate injection 2 kg/s
# 1D cylindrical mesh
# Initially, system has only a liquid phase, until enough gas is injected
# to form a gas phase, in which case the system becomes two phase.
# Note: this test is the same as theis.i, but uses the tabulated version of the CO2FluidProperties
[Mesh]
type = GeneratedMesh
dim = 1
nx = 80
xmax = 200
bias_x = 1.05
coord_type = RZ
rz_coord_axis = Y
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[AuxVariables]
[saturation_gas]
order = CONSTANT
family = MONOMIAL
[]
[x1]
order = CONSTANT
family = MONOMIAL
[]
[y0]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[saturation_gas]
type = PorousFlowPropertyAux
variable = saturation_gas
property = saturation
phase = 1
execute_on = timestep_end
[]
[x1]
type = PorousFlowPropertyAux
variable = x1
property = mass_fraction
phase = 0
fluid_component = 1
execute_on = timestep_end
[]
[y0]
type = PorousFlowPropertyAux
variable = y0
property = mass_fraction
phase = 1
fluid_component = 0
execute_on = timestep_end
[]
[]
[Variables]
[pgas]
initial_condition = 20e6
[]
[zi]
initial_condition = 0
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pgas
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pgas
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = zi
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = zi
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas zi'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[fs]
type = PorousFlowWaterNCG
water_fp = water
gas_fp = tabulated
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[tabulated]
type = TabulatedBicubicFluidProperties
fp = co2
fluid_property_file = fluid_properties.csv
# We try to avoid using both, but some properties are not implemented in the tabulation
allow_fp_and_tabulation = true
# Test was design prior to bounds check
error_on_out_of_bounds = false
# Comment out the fp parameter and uncomment below to use the newly generated tabulation
# fluid_property_file = fluid_properties.csv
[]
[water]
type = Water97FluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 20
[]
[waterncg]
type = PorousFlowFluidState
gas_porepressure = pgas
z = zi
temperature_unit = Celsius
capillary_pressure = pc
fluid_state = fs
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.1
sum_s_res = 0.1
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
[]
[]
[BCs]
[rightwater]
type = DirichletBC
boundary = right
value = 20e6
variable = pgas
[]
[]
[DiracKernels]
[source]
type = PorousFlowSquarePulsePointSource
point = '0 0 0'
mass_flux = 2
variable = zi
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu NONZERO 2 1E-8 1E-10 20'
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
end_time = 8e2
[TimeStepper]
type = IterationAdaptiveDT
dt = 2
growth_factor = 2
[]
[]
[VectorPostprocessors]
[line]
type = LineValueSampler
warn_discontinuous_face_values = false
sort_by = x
start_point = '0 0 0'
end_point = '200 0 0'
num_points = 1000
variable = 'pgas zi x1 saturation_gas'
execute_on = 'timestep_end'
[]
[]
[Postprocessors]
[pgas]
type = PointValue
point = '1 0 0'
variable = pgas
[]
[sgas]
type = PointValue
point = '1 0 0'
variable = saturation_gas
[]
[zi]
type = PointValue
point = '1 0 0'
variable = zi
[]
[massgas]
type = PorousFlowFluidMass
fluid_component = 1
[]
[x1]
type = PointValue
point = '1 0 0'
variable = x1
[]
[y0]
type = PointValue
point = '1 0 0'
variable = y0
[]
[]
[Outputs]
print_linear_residuals = false
perf_graph = true
[csvout]
type = CSV
file_base = theis_tabulated_csvout
execute_on = timestep_end
execute_vector_postprocessors_on = final
[]
[]
(modules/porous_flow/test/tests/poro_elasticity/terzaghi_constM.i)
# Terzaghi's problem of consolodation of a drained medium
#
# A saturated soil sample sits in a bath of water.
# It is constrained on its sides, and bottom.
# Its sides and bottom are also impermeable.
# Initially it is unstressed.
# A normal stress, q, is applied to the soil's top.
# The soil then slowly compresses as water is squeezed
# out from the sample from its top (the top BC for
# the porepressure is porepressure = 0).
#
# See, for example. Section 2.2 of the online manuscript
# Arnold Verruijt "Theory and Problems of Poroelasticity" Delft University of Technology 2013
# but note that the "sigma" in that paper is the negative
# of the stress in TensorMechanics
#
# Here are the problem's parameters, and their values:
# Soil height. h = 10
# Soil's Lame lambda. la = 2
# Soil's Lame mu, which is also the Soil's shear modulus. mu = 3
# Soil bulk modulus. K = la + 2*mu/3 = 4
# Soil confined compressibility. m = 1/(K + 4mu/3) = 0.125
# Soil bulk compliance. 1/K = 0.25
# Fluid bulk modulus. Kf = 8
# Fluid bulk compliance. 1/Kf = 0.125
# Fluid mobility (soil permeability/fluid viscosity). k = 1.5
# Soil initial porosity. phi0 = 0.1
# Biot coefficient. alpha = 0.6
# Soil initial storativity, which is the reciprocal of the initial Biot modulus. S = phi0/Kf + (alpha - phi0)(1 - alpha)/K = 0.0625
# Consolidation coefficient. c = k/(S + alpha^2 m) = 13.95348837
# Normal stress on top. q = 1
# Initial porepressure, resulting from instantaneous application of q, assuming corresponding instantaneous increase of porepressure (Note that this is calculated by MOOSE: we only need it for the analytical solution). p0 = alpha*m*q/(S + alpha^2 m) = 0.69767442
# Initial vertical displacement (down is positive), resulting from instantaneous application of q (Note this is calculated by MOOSE: we only need it for the analytical solution). uz0 = q*m*h*S/(S + alpha^2 m)
# Final vertical displacement (down in positive) (Note this is calculated by MOOSE: we only need it for the analytical solution). uzinf = q*m*h
#
# The solution for porepressure is
# P = 4*p0/\pi \sum_{k=1}^{\infty} \frac{(-1)^{k-1}}{2k-1} \cos ((2k-1)\pi z/(2h)) \exp(-(2k-1)^2 \pi^2 ct/(4 h^2))
# This series converges very slowly for ct/h^2 small, so in that domain
# P = p0 erf( (1-(z/h))/(2 \sqrt(ct/h^2)) )
#
# The degree of consolidation is defined as
# U = (uz - uz0)/(uzinf - uz0)
# where uz0 and uzinf are defined above, and
# uz = the vertical displacement of the top (down is positive)
# U = 1 - (8/\pi^2)\sum_{k=1}^{\infty} \frac{1}{(2k-1)^2} \exp(-(2k-1)^2 \pi^2 ct/(4 h^2))
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 10
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = 0
zmax = 10
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
PorousFlowDictator = dictator
block = 0
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure disp_x disp_y disp_z'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.8
alpha = 1
[]
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[porepressure]
[]
[]
[BCs]
[confinex]
type = DirichletBC
variable = disp_x
value = 0
boundary = 'left right'
[]
[confiney]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'bottom top'
[]
[basefixed]
type = DirichletBC
variable = disp_z
value = 0
boundary = back
[]
[topdrained]
type = DirichletBC
variable = porepressure
value = 0
boundary = front
[]
[topload]
type = NeumannBC
variable = disp_z
value = -1
boundary = front
[]
[]
[Kernels]
[grad_stress_x]
type = StressDivergenceTensors
variable = disp_x
component = 0
[]
[grad_stress_y]
type = StressDivergenceTensors
variable = disp_y
component = 1
[]
[grad_stress_z]
type = StressDivergenceTensors
variable = disp_z
component = 2
[]
[poro_x]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.6
variable = disp_x
component = 0
[]
[poro_y]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.6
variable = disp_y
component = 1
[]
[poro_z]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.6
component = 2
variable = disp_z
[]
[poro_vol_exp]
type = PorousFlowMassVolumetricExpansion
variable = porepressure
fluid_component = 0
[]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = porepressure
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = porepressure
gravity = '0 0 0'
fluid_component = 0
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 8
density0 = 1
thermal_expansion = 0
viscosity = 0.96
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '2 3'
# bulk modulus is lambda + 2*mu/3 = 2 + 2*3/3 = 4
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = porepressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityHMBiotModulus
porosity_zero = 0.1
biot_coefficient = 0.6
solid_bulk = 4
constant_fluid_bulk_modulus = 8
constant_biot_modulus = 16
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.5 0 0 0 1.5 0 0 0 1.5'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0 # unimportant in this fully-saturated situation
phase = 0
[]
[]
[Postprocessors]
[p0]
type = PointValue
outputs = csv
point = '0 0 0'
variable = porepressure
use_displaced_mesh = false
[]
[p1]
type = PointValue
outputs = csv
point = '0 0 1'
variable = porepressure
use_displaced_mesh = false
[]
[p2]
type = PointValue
outputs = csv
point = '0 0 2'
variable = porepressure
use_displaced_mesh = false
[]
[p3]
type = PointValue
outputs = csv
point = '0 0 3'
variable = porepressure
use_displaced_mesh = false
[]
[p4]
type = PointValue
outputs = csv
point = '0 0 4'
variable = porepressure
use_displaced_mesh = false
[]
[p5]
type = PointValue
outputs = csv
point = '0 0 5'
variable = porepressure
use_displaced_mesh = false
[]
[p6]
type = PointValue
outputs = csv
point = '0 0 6'
variable = porepressure
use_displaced_mesh = false
[]
[p7]
type = PointValue
outputs = csv
point = '0 0 7'
variable = porepressure
use_displaced_mesh = false
[]
[p8]
type = PointValue
outputs = csv
point = '0 0 8'
variable = porepressure
use_displaced_mesh = false
[]
[p9]
type = PointValue
outputs = csv
point = '0 0 9'
variable = porepressure
use_displaced_mesh = false
[]
[p99]
type = PointValue
outputs = csv
point = '0 0 10'
variable = porepressure
use_displaced_mesh = false
[]
[zdisp]
type = PointValue
outputs = csv
point = '0 0 10'
variable = disp_z
use_displaced_mesh = false
[]
[dt]
type = FunctionValuePostprocessor
outputs = console
function = if(0.5*t<0.1,0.5*t,0.1)
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
start_time = 0
end_time = 10
[TimeStepper]
type = PostprocessorDT
postprocessor = dt
dt = 0.0001
[]
[]
[Outputs]
execute_on = 'timestep_end'
file_base = terzaghi_constM
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/aux_kernels/darcy_velocity.i)
# checking that the PorousFlowDarcyVelocityComponent AuxKernel works as expected
# for the fully-saturated case (relative-permeability = 1)
# There is one element, of unit size. The pressures and fluid densities at the qps are:
# (x,y,z)=( 0.211325 , 0.211325 , 0.211325 ). p = 1.479 rho = 3.217
# (x,y,z)=( 0.788675 , 0.211325 , 0.211325 ). p = 2.057 rho = 4.728
# (x,y,z)=( 0.211325 , 0.788675 , 0.211325 ). p = 2.634 rho = 6.947
# (x,y,z)=( 0.788675 , 0.788675 , 0.211325 ). p = 3.211 rho = 10.208
# (x,y,z)=( 0.211325 , 0.211325 , 0.788675 ). p = 3.789 rho = 15.001
# (x,y,z)=( 0.788675 , 0.211325 , 0.788675 ). p = 4.367 rho = 22.043
# (x,y,z)=( 0.211325 , 0.788675 , 0.788675 ). p = 4.943 rho = 32.392
# (x,y,z)=( 0.788675 , 0.788675 , 0.788675 ). p = 5.521 rho = 47.599
# Average density = 17.7668
# grad(P) = (1, 2, 4)
# with permeability = diag(1, 2, 3) and gravity = (1, -2, 3) and viscosity = 3.2
# So Darcy velocity = (5.23963, -23.4585, 46.2192)
[Mesh]
type = GeneratedMesh
dim = 3
xmin = 0
xmax = 1
ymin = 0
ymax = 1
zmin = 0
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '1 -2 3'
[]
[Variables]
[pp]
[]
[]
[ICs]
[pinit]
type = FunctionIC
function = x+2*y+4*z
variable = pp
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[AuxVariables]
[vel_x]
order = CONSTANT
family = MONOMIAL
[]
[vel_y]
order = CONSTANT
family = MONOMIAL
[]
[vel_z]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[vel_x]
type = PorousFlowDarcyVelocityComponent
variable = vel_x
component = x
fluid_phase = 0
[]
[vel_y]
type = PorousFlowDarcyVelocityComponent
variable = vel_y
component = y
fluid_phase = 0
[]
[vel_z]
type = PorousFlowDarcyVelocityComponent
variable = vel_z
component = z
fluid_phase = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.5
viscosity = 3.2
density0 = 1.2
thermal_expansion = 0
[]
[]
[Postprocessors]
[vel_x]
type = PointValue
variable = vel_x
point = '0.5 0.5 0.5'
[]
[vel_y]
type = PointValue
variable = vel_y
point = '0.5 0.5 0.5'
[]
[vel_z]
type = PointValue
variable = vel_z
point = '0.5 0.5 0.5'
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Executioner]
type = Transient
solve_type = Newton
nl_abs_tol = 1e-16
dt = 1
end_time = 1
[]
[Outputs]
execute_on = 'timestep_end'
file_base = darcy_velocity
csv = true
[]
(modules/porous_flow/test/tests/jacobian/pls04.i)
# PorousFlowPiecewiseLinearSink with 2-phase, 3-components, with enthalpy, internal_energy, and thermal_conductivity
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 2
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[massfrac_ph0_sp0]
[]
[massfrac_ph0_sp1]
[]
[massfrac_ph1_sp0]
[]
[massfrac_ph1_sp1]
[]
[temp]
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp ppwater ppgas massfrac_ph0_sp0 massfrac_ph0_sp1 massfrac_ph1_sp0 massfrac_ph1_sp1'
number_fluid_phases = 2
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[ICs]
[temp]
type = RandomIC
variable = temp
min = 1
max = 2
[]
[ppwater]
type = RandomIC
variable = ppwater
min = -1
max = 0
[]
[ppgas]
type = RandomIC
variable = ppgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 1
[]
[massfrac_ph0_sp1]
type = RandomIC
variable = massfrac_ph0_sp1
min = 0
max = 1
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 1
[]
[massfrac_ph1_sp1]
type = RandomIC
variable = massfrac_ph1_sp1
min = 0
max = 1
[]
[]
[Kernels]
[dummy_temp]
type = TimeDerivative
variable = temp
[]
[dummy_ppwater]
type = TimeDerivative
variable = ppwater
[]
[dummy_ppgas]
type = TimeDerivative
variable = ppgas
[]
[dummy_m00]
type = TimeDerivative
variable = massfrac_ph0_sp0
[]
[dummy_m01]
type = TimeDerivative
variable = massfrac_ph0_sp1
[]
[dummy_m10]
type = TimeDerivative
variable = massfrac_ph1_sp0
[]
[dummy_m11]
type = TimeDerivative
variable = massfrac_ph1_sp1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
cv = 1.1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1.4
cv = 1.8
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph0_sp1 massfrac_ph1_sp0 massfrac_ph1_sp1'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '0.1 0.2 0.3 0.2 0 0.1 0.3 0.1 0.1'
wet_thermal_conductivity = '10 2 31 2 40 1 31 1 10'
exponent = 0.5
[]
[]
[BCs]
[flux_w]
type = PorousFlowPiecewiseLinearSink
boundary = 'left'
pt_vals = '-1 -0.5 0'
multipliers = '1 2 4'
variable = ppwater
mass_fraction_component = 0
fluid_phase = 0
use_relperm = true
use_mobility = true
use_enthalpy = true
flux_function = 'x*y'
[]
[flux_g]
type = PorousFlowPiecewiseLinearSink
boundary = 'top'
pt_vals = '0 0.5 1'
multipliers = '1 -2 4'
mass_fraction_component = 0
variable = ppgas
fluid_phase = 1
use_relperm = true
use_mobility = true
use_internal_energy = true
flux_function = '-x*y'
[]
[flux_1]
type = PorousFlowPiecewiseLinearSink
boundary = 'right'
pt_vals = '0 0.5 1'
multipliers = '1 3 4'
mass_fraction_component = 1
variable = massfrac_ph0_sp0
fluid_phase = 0
use_relperm = true
use_mobility = true
use_internal_energy = true
[]
[flux_2]
type = PorousFlowPiecewiseLinearSink
boundary = 'back top'
pt_vals = '0 0.5 1'
multipliers = '0 1 -3'
mass_fraction_component = 1
variable = massfrac_ph1_sp0
fluid_phase = 1
use_relperm = true
use_mobility = true
use_enthalpy = true
flux_function = '0.5*x*y'
[]
[flux_3]
type = PorousFlowPiecewiseLinearSink
boundary = 'right'
pt_vals = '0 0.5 1'
multipliers = '1 3 4'
mass_fraction_component = 2
variable = ppwater
fluid_phase = 0
use_relperm = true
use_enthalpy = true
use_mobility = true
[]
[flux_4]
type = PorousFlowPiecewiseLinearSink
boundary = 'back top'
pt_vals = '0 0.5 1'
multipliers = '0 1 -3'
mass_fraction_component = 2
variable = massfrac_ph1_sp0
fluid_phase = 1
use_relperm = true
use_mobility = true
flux_function = '-0.5*x*y'
use_enthalpy = true
use_thermal_conductivity = true
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
file_base = pls04
[]
(modules/porous_flow/test/tests/jacobian/fflux14.i)
# 1phase, 2components (water and salt using BrineFluidProperties), constant insitu permeability
# Constant relative perm, nonzero gravity
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 2
nx = 1
xmin = 0
xmax = 10
ny = 1
ymin = 0
ymax = 10
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 -10 0'
[]
[Variables]
[pp]
[]
[xnacl]
[]
[]
[ICs]
[pp]
type = RandomIC
variable = pp
min = 1e6
max = 2e6
[]
[massfrac0]
type = RandomIC
variable = xnacl
min = 0.1
max = 0.2
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pp
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = xnacl
fluid_component = 1
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = xnacl
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp xnacl'
number_fluid_phases = 1
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[]
[FluidProperties]
[brine]
type = BrineFluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'xnacl'
[]
[brine]
type = PorousFlowBrine
phase = 0
xnacl = xnacl
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-14 0 0 0 2e-14 0 0 0 3e-14'
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[relperm]
type = PorousFlowRelativePermeabilityConst
kr = 1
phase = 0
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/dispersion/disp01_heavy.i)
# Test dispersive part of PorousFlowDispersiveFlux kernel by setting diffusion
# coefficients to zero. A pressure gradient is applied over the mesh to give a
# uniform velocity. Gravity is set to zero.
# Mass fraction is set to 1 on the left hand side and 0 on the right hand side.
[Mesh]
type = GeneratedMesh
dim = 1
nx = 200
xmax = 10
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
compute_enthalpy = false
compute_internal_energy = false
[]
[Variables]
[pp]
[]
[massfrac0]
[]
[]
[AuxVariables]
[velocity]
family = MONOMIAL
order = FIRST
[]
[]
[AuxKernels]
[velocity]
type = PorousFlowDarcyVelocityComponent
variable = velocity
component = x
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = pic
[]
[massfrac0]
type = ConstantIC
variable = massfrac0
value = 0
[]
[]
[Functions]
[pic]
type = ParsedFunction
expression = 1.1e5-x*1e3
[]
[]
[BCs]
[xleft]
type = DirichletBC
value = 1
variable = massfrac0
boundary = left
[]
[xright]
type = DirichletBC
value = 0
variable = massfrac0
boundary = right
[]
[pright]
type = DirichletBC
variable = pp
boundary = right
value = 1e5
[]
[pleft]
type = DirichletBC
variable = pp
boundary = left
value = 1.1e5
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[adv0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
[]
[diff0]
type = PorousFlowDispersiveFlux
variable = pp
disp_trans = 0
disp_long = 0.2
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = massfrac0
[]
[adv1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = massfrac0
[]
[diff1]
type = PorousFlowDispersiveFlux
fluid_component = 1
variable = massfrac0
disp_trans = 0
disp_long = 0.2
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp massfrac0'
number_fluid_phases = 1
number_fluid_components = 2
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1e9
density0 = 1000
viscosity = 0.001
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseFullySaturated
porepressure = pp
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = massfrac0
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[poro]
type = PorousFlowPorosityConst
porosity = 0.3
[]
[diff]
type = PorousFlowDiffusivityConst
diffusion_coeff = '0 0'
tortuosity = 0.1
[]
[relp]
type = PorousFlowRelativePermeabilityConst
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-9 0 0 0 1e-9 0 0 0 1e-9'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu NONZERO 2 '
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
end_time = 1e3
dtmax = 10
[TimeStepper]
type = IterationAdaptiveDT
growth_factor = 1.5
cutback_factor = 0.5
dt = 1
[]
[]
[VectorPostprocessors]
[xmass]
type = NodalValueSampler
sort_by = id
variable = massfrac0
[]
[]
[Outputs]
[out]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/test/tests/jacobian/outflowbc04.i)
# PorousFlowOutflowBC: testing Jacobian for multi-phase, multi-component
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 3
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '1 2 3'
[]
[Variables]
[pwater]
initial_condition = 1
[]
[pgas]
initial_condition = 2
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pwater
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = pgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = pgas
[]
[]
[AuxVariables]
[frac_water_in_liquid]
initial_condition = 0.6
[]
[frac_water_in_gas]
initial_condition = 0.4
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas pwater'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1
m = 0.6
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1.2
cp = 0.9
cv = 1.1
viscosity = 0.4
thermal_expansion = 0.7
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 2.5
density0 = 0.5
cp = 1.9
cv = 2.1
viscosity = 0.9
thermal_expansion = 0.4
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 0
[]
[saturation_calculator]
type = PorousFlow2PhasePP
phase0_porepressure = pwater
phase1_porepressure = pgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'frac_water_in_liquid frac_water_in_gas'
[]
[water]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[co2]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0.1 0.2 0.3 1.8 0.9 1.7 0.4 0.3 1.1'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.0
sum_s_res = 0.0
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityBC
nw_phase = true
lambda = 2
s_res = 0.0
sum_s_res = 0.0
phase = 1
[]
[]
[BCs]
[outflow0]
type = PorousFlowOutflowBC
boundary = 'front back top bottom'
variable = pwater
mass_fraction_component = 0
multiplier = 1E8 # so this BC gets weighted much more heavily than Kernels
[]
[outflow1]
type = PorousFlowOutflowBC
boundary = 'left right top bottom'
variable = pgas
mass_fraction_component = 1
multiplier = 1E8 # so this BC gets weighted much more heavily than Kernels
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1E-7
num_steps = 1
# petsc_options = '-snes_test_jacobian -snes_force_iteration'
# petsc_options_iname = '-snes_type --ksp_type -pc_type -snes_convergence_test'
# petsc_options_value = ' ksponly preonly none skip'
[]
(modules/porous_flow/test/tests/jacobian/line_sink04.i)
# PorousFlowPolyLineSink with 2-phase, 3-components, with enthalpy, internal_energy, and thermal_conductivity
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 2
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[massfrac_ph0_sp0]
[]
[massfrac_ph0_sp1]
[]
[massfrac_ph1_sp0]
[]
[massfrac_ph1_sp1]
[]
[temp]
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp ppwater ppgas massfrac_ph0_sp0 massfrac_ph0_sp1 massfrac_ph1_sp0 massfrac_ph1_sp1'
number_fluid_phases = 2
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[dummy_outflow]
type = PorousFlowSumQuantity
[]
[]
[ICs]
[temp]
type = RandomIC
variable = temp
min = 1
max = 2
[]
[ppwater]
type = RandomIC
variable = ppwater
min = -1
max = 0
[]
[ppgas]
type = RandomIC
variable = ppgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 1
[]
[massfrac_ph0_sp1]
type = RandomIC
variable = massfrac_ph0_sp1
min = 0
max = 1
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 1
[]
[massfrac_ph1_sp1]
type = RandomIC
variable = massfrac_ph1_sp1
min = 0
max = 1
[]
[]
[Kernels]
[dummy_temp]
type = TimeDerivative
variable = temp
[]
[dummy_ppwater]
type = TimeDerivative
variable = ppwater
[]
[dummy_ppgas]
type = TimeDerivative
variable = ppgas
[]
[dummy_m00]
type = TimeDerivative
variable = massfrac_ph0_sp0
[]
[dummy_m01]
type = TimeDerivative
variable = massfrac_ph0_sp1
[]
[dummy_m10]
type = TimeDerivative
variable = massfrac_ph1_sp0
[]
[dummy_m11]
type = TimeDerivative
variable = massfrac_ph1_sp1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
cv = 1.1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1.4
cv = 1.8
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph0_sp1 massfrac_ph1_sp0 massfrac_ph1_sp1'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '0.1 0.2 0.3 0.2 0 0.1 0.3 0.1 0.1'
[]
[]
[DiracKernels]
[dirac0]
type = PorousFlowPolyLineSink
fluid_phase = 0
variable = ppwater
point_file = one_point.bh
line_length = 1
SumQuantityUO = dummy_outflow
p_or_t_vals = '-0.9 1.5'
fluxes = '-1.1 2.2'
[]
[dirac1]
type = PorousFlowPolyLineSink
fluid_phase = 1
variable = ppgas
line_length = 1
use_relative_permeability = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow
p_or_t_vals = '-1.9 1.5'
fluxes = '1.1 -2.2'
[]
[dirac2]
type = PorousFlowPolyLineSink
fluid_phase = 0
variable = massfrac_ph0_sp0
line_length = 1.3
use_mobility = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow
p_or_t_vals = '-1.9 1.5'
fluxes = '1.1 -0.2'
[]
[dirac3]
type = PorousFlowPolyLineSink
fluid_phase = 0
variable = massfrac_ph0_sp1
line_length = 1.3
use_enthalpy = true
mass_fraction_component = 0
point_file = one_point.bh
SumQuantityUO = dummy_outflow
p_or_t_vals = '-1.9 1.5'
fluxes = '1.1 -0.2'
[]
[dirac4]
type = PorousFlowPolyLineSink
fluid_phase = 1
variable = massfrac_ph1_sp0
function_of = temperature
line_length = 0.9
mass_fraction_component = 1
use_internal_energy = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow
p_or_t_vals = '-1.9 1.5'
fluxes = '1.1 -0.2'
[]
[dirac5]
type = PorousFlowPolyLineSink
fluid_phase = 1
variable = temp
line_length = 0.9
mass_fraction_component = 2
use_internal_energy = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow
p_or_t_vals = '-1.9 1.5'
fluxes = '1.1 -0.2'
[]
[dirac6]
type = PorousFlowPolyLineSink
fluid_phase = 1
variable = massfrac_ph0_sp0
use_mobility = true
function_of = temperature
mass_fraction_component = 1
use_relative_permeability = true
use_internal_energy = true
point_file = ten_points.bh
SumQuantityUO = dummy_outflow
p_or_t_vals = '-1.9 1.5'
fluxes = '0 -0.2'
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
file_base = line_sink04
[]
(modules/porous_flow/test/tests/jacobian/disp04.i)
# Test the Jacobian of the PorousFlowDisperiveFlux kernel
[Mesh]
type = GeneratedMesh
dim = 2
nx = 3
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[massfrac0]
[]
[]
[ICs]
[pp]
type = RandomIC
variable = pp
max = 2e1
min = 1e1
[]
[massfrac0]
type = RandomIC
variable = massfrac0
min = 0
max = 1
[]
[]
[Kernels]
[diff0]
type = PorousFlowDispersiveFlux
fluid_component = 0
variable = pp
gravity = '1 0 0'
disp_long = 0.2
disp_trans = 0.1
[]
[diff1]
type = PorousFlowDispersiveFlux
fluid_component = 1
variable = massfrac0
gravity = '1 0 0'
disp_long = 0.2
disp_trans = 0.1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp massfrac0'
number_fluid_phases = 1
number_fluid_components = 2
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1e7
density0 = 10
thermal_expansion = 0
viscosity = 1
[]
[]
[Materials]
[temp]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseFullySaturated
porepressure = pp
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac0'
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[poro]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[diff]
type = PorousFlowDiffusivityConst
diffusion_coeff = '1e-2 1e-1'
tortuosity = '0.1'
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = PorousFlowRelativePermeabilityConst
phase = 0
[]
[]
[Preconditioning]
active = smp
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/aux_kernels/darcy_velocity_lower.i)
# checking that the PorousFlowDarcyVelocityComponentLowerDimensional AuxKernel works as expected
# for the fully-saturated case (relative-permeability = 1)
# The fractured_block.e has size = 10x10x10, and a fracture running through its
# centre, with normal = (0, -sin(20deg), cos(20deg))
# Porepressure is initialised to grad(P) = (0, 0, 1)
# Fluid_density = 2
# viscosity = 10
# relative_permeability = 1
# permeability = (5, 5, 5) (in the bulk)
# permeability = (10, 10, 10) (in the fracture)
# aperture = 1
# gravity = (1, 0.5, 0.2)
# So Darcy velocity in the bulk = (1, 0.5, -0.3)
# in the fracture grad(P) = (0, 0.3213938, 0.11697778)
# In the fracture the projected gravity vector is
# tangential_gravity = (1, 0.5057899, 0.18409245)
# So the Darcy velocity in the fracture = (2, 0.690186, 0.251207)
[Mesh]
type = FileMesh
file = fractured_block.e
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '1 0.5 0.2'
[]
[Variables]
[pp]
[]
[]
[ICs]
[pinit]
type = FunctionIC
function = z
variable = pp
[]
[]
[Kernels]
[dummy]
type = TimeDerivative
variable = pp
[]
[]
[AuxVariables]
[bulk_vel_x]
order = CONSTANT
family = MONOMIAL
[]
[bulk_vel_y]
order = CONSTANT
family = MONOMIAL
[]
[bulk_vel_z]
order = CONSTANT
family = MONOMIAL
[]
[fracture_vel_x]
order = CONSTANT
family = MONOMIAL
block = 3
[]
[fracture_vel_y]
order = CONSTANT
family = MONOMIAL
block = 3
[]
[fracture_vel_z]
order = CONSTANT
family = MONOMIAL
block = 3
[]
[]
[AuxKernels]
[bulk_vel_x]
type = PorousFlowDarcyVelocityComponent
variable = bulk_vel_x
component = x
fluid_phase = 0
[]
[bulk_vel_y]
type = PorousFlowDarcyVelocityComponent
variable = bulk_vel_y
component = y
fluid_phase = 0
[]
[bulk_vel_z]
type = PorousFlowDarcyVelocityComponent
variable = bulk_vel_z
component = z
fluid_phase = 0
[]
[fracture_vel_x]
type = PorousFlowDarcyVelocityComponentLowerDimensional
variable = fracture_vel_x
component = x
fluid_phase = 0
[]
[fracture_vel_y]
type = PorousFlowDarcyVelocityComponentLowerDimensional
variable = fracture_vel_y
component = y
fluid_phase = 0
[]
[fracture_vel_z]
type = PorousFlowDarcyVelocityComponentLowerDimensional
variable = fracture_vel_z
component = z
fluid_phase = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1E16
viscosity = 10
density0 = 2
thermal_expansion = 0
[]
[]
[Postprocessors]
[bulk_vel_x]
type = ElementAverageValue
block = 1
variable = bulk_vel_x
[]
[bulk_vel_y]
type = ElementAverageValue
block = 1
variable = bulk_vel_y
[]
[bulk_vel_z]
type = ElementAverageValue
block = 1
variable = bulk_vel_z
[]
[fracture_vel_x]
type = ElementAverageValue
block = 3
variable = fracture_vel_x
[]
[fracture_vel_y]
type = ElementAverageValue
block = 3
variable = fracture_vel_y
[]
[fracture_vel_z]
type = ElementAverageValue
block = 3
variable = fracture_vel_z
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '5 0 0 0 5 0 0 0 5'
block = '1 2'
[]
[permeability_fracture]
type = PorousFlowPermeabilityConst
permeability = '10 0 0 0 10 0 0 0 10'
block = 3
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[Executioner]
type = Transient
dt = 1
end_time = 1
[]
[Outputs]
csv = true
[]
(modules/porous_flow/test/tests/gravity/grav02e_fv.i)
# Checking that gravity head is established in the transient situation when 0<=saturation<=1 (note the less-than-or-equal-to).
# 2phase (PS), 2components, constant capillary pressure, constant fluid bulk-moduli for each phase, constant viscosity,
# constant permeability, Corey relative permeabilities with no residual saturation
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '-10 0 0'
[]
[Variables]
[ppwater]
type = MooseVariableFVReal
initial_condition = 1.5e6
[]
[sgas]
type = MooseVariableFVReal
initial_condition = 0.3
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
type = MooseVariableFVReal
initial_condition = 1
[]
[massfrac_ph1_sp0]
type = MooseVariableFVReal
initial_condition = 0
[]
[ppgas]
type = MooseVariableFVReal
[]
[swater]
type = MooseVariableFVReal
[]
[relpermwater]
type = MooseVariableFVReal
[]
[relpermgas]
type = MooseVariableFVReal
[]
[]
[FVKernels]
[mass0]
type = FVPorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[flux0]
type = FVPorousFlowAdvectiveFlux
fluid_component = 0
variable = ppwater
[]
[mass1]
type = FVPorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[flux1]
type = FVPorousFlowAdvectiveFlux
fluid_component = 1
variable = sgas
[]
[]
[AuxKernels]
[ppgas]
type = ADPorousFlowPropertyAux
property = pressure
phase = 1
variable = ppgas
execute_on = 'initial timestep_end'
[]
[swater]
type = ADPorousFlowPropertyAux
property = saturation
phase = 0
variable = swater
execute_on = 'initial timestep_end'
[]
[relpermwater]
type = ADPorousFlowPropertyAux
property = relperm
phase = 0
variable = relpermwater
execute_on = 'initial timestep_end'
[]
[relpermgas]
type = ADPorousFlowPropertyAux
property = relperm
phase = 1
variable = relpermgas
execute_on = 'initial timestep_end'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater sgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 1e5
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
viscosity = 1e-3
thermal_expansion = 0
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 10
viscosity = 1e-5
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = ADPorousFlowTemperature
[]
[ppss]
type = ADPorousFlow2PhasePS
phase0_porepressure = ppwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = ADPorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = ADPorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = ADPorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = ADPorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = ADPorousFlowPermeabilityConst
permeability = '1e-11 0 0 0 1e-11 0 0 0 1e-11'
[]
[relperm_water]
type = ADPorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm_gas]
type = ADPorousFlowRelativePermeabilityCorey
n = 2
phase = 1
[]
[]
[VectorPostprocessors]
[vars]
type = ElementValueSampler
variable = 'ppgas ppwater sgas swater'
sort_by = x
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 5e3
nl_abs_tol = 1e-12
[TimeStepper]
type = IterationAdaptiveDT
dt = 1e3
[]
[]
[Outputs]
execute_on = 'final'
perf_graph = true
csv = true
[]
(modules/porous_flow/test/tests/fluidstate/waterncg_nonisothermal.i)
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 2
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pgas]
initial_condition = 1e6
[]
[z]
initial_condition = 0.25
[]
[temperature]
initial_condition = 70
[]
[]
[AuxVariables]
[pressure_gas]
order = CONSTANT
family = MONOMIAL
[]
[pressure_water]
order = CONSTANT
family = MONOMIAL
[]
[saturation_gas]
order = CONSTANT
family = MONOMIAL
[]
[saturation_water]
order = CONSTANT
family = MONOMIAL
[]
[density_water]
order = CONSTANT
family = MONOMIAL
[]
[density_gas]
order = CONSTANT
family = MONOMIAL
[]
[viscosity_water]
order = CONSTANT
family = MONOMIAL
[]
[viscosity_gas]
order = CONSTANT
family = MONOMIAL
[]
[enthalpy_water]
order = CONSTANT
family = MONOMIAL
[]
[enthalpy_gas]
order = CONSTANT
family = MONOMIAL
[]
[internal_energy_water]
order = CONSTANT
family = MONOMIAL
[]
[internal_energy_gas]
order = CONSTANT
family = MONOMIAL
[]
[x0_water]
order = CONSTANT
family = MONOMIAL
[]
[x0_gas]
order = CONSTANT
family = MONOMIAL
[]
[x1_water]
order = CONSTANT
family = MONOMIAL
[]
[x1_gas]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[pressure_water]
type = PorousFlowPropertyAux
variable = pressure_water
property = pressure
phase = 0
execute_on = timestep_end
[]
[pressure_gas]
type = PorousFlowPropertyAux
variable = pressure_gas
property = pressure
phase = 1
execute_on = timestep_end
[]
[saturation_water]
type = PorousFlowPropertyAux
variable = saturation_water
property = saturation
phase = 0
execute_on = timestep_end
[]
[saturation_gas]
type = PorousFlowPropertyAux
variable = saturation_gas
property = saturation
phase = 1
execute_on = timestep_end
[]
[density_water]
type = PorousFlowPropertyAux
variable = density_water
property = density
phase = 0
execute_on = timestep_end
[]
[density_gas]
type = PorousFlowPropertyAux
variable = density_gas
property = density
phase = 1
execute_on = timestep_end
[]
[viscosity_water]
type = PorousFlowPropertyAux
variable = viscosity_water
property = viscosity
phase = 0
execute_on = timestep_end
[]
[viscosity_gas]
type = PorousFlowPropertyAux
variable = viscosity_gas
property = viscosity
phase = 1
execute_on = timestep_end
[]
[enthalpy_water]
type = PorousFlowPropertyAux
variable = enthalpy_water
property = enthalpy
phase = 0
execute_on = timestep_end
[]
[enthalpy_gas]
type = PorousFlowPropertyAux
variable = enthalpy_gas
property = enthalpy
phase = 1
execute_on = timestep_end
[]
[internal_energy_water]
type = PorousFlowPropertyAux
variable = internal_energy_water
property = internal_energy
phase = 0
execute_on = timestep_end
[]
[internal_energy_gas]
type = PorousFlowPropertyAux
variable = internal_energy_gas
property = internal_energy
phase = 1
execute_on = timestep_end
[]
[x1_water]
type = PorousFlowPropertyAux
variable = x1_water
property = mass_fraction
phase = 0
fluid_component = 1
execute_on = timestep_end
[]
[x1_gas]
type = PorousFlowPropertyAux
variable = x1_gas
property = mass_fraction
phase = 1
fluid_component = 1
execute_on = timestep_end
[]
[x0_water]
type = PorousFlowPropertyAux
variable = x0_water
property = mass_fraction
phase = 0
fluid_component = 0
execute_on = timestep_end
[]
[x0_gas]
type = PorousFlowPropertyAux
variable = x0_gas
property = mass_fraction
phase = 1
fluid_component = 0
execute_on = timestep_end
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pgas
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = z
fluid_component = 1
[]
[heat]
type = TimeDerivative
variable = temperature
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas z '
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[fs]
type = PorousFlowWaterNCG
water_fp = water
gas_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[water]
type = Water97FluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temperature
[]
[waterncg]
type = PorousFlowFluidState
gas_porepressure = pgas
z = z
temperature = temperature
temperature_unit = Celsius
capillary_pressure = pc
fluid_state = fs
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
[density_water]
type = ElementIntegralVariablePostprocessor
variable = density_water
[]
[density_gas]
type = ElementIntegralVariablePostprocessor
variable = density_gas
[]
[viscosity_water]
type = ElementIntegralVariablePostprocessor
variable = viscosity_water
[]
[viscosity_gas]
type = ElementIntegralVariablePostprocessor
variable = viscosity_gas
[]
[enthalpy_water]
type = ElementIntegralVariablePostprocessor
variable = enthalpy_water
[]
[enthalpy_gas]
type = ElementIntegralVariablePostprocessor
variable = enthalpy_gas
[]
[internal_energy_water]
type = ElementIntegralVariablePostprocessor
variable = internal_energy_water
[]
[internal_energy_gas]
type = ElementIntegralVariablePostprocessor
variable = internal_energy_gas
[]
[x0_water]
type = ElementIntegralVariablePostprocessor
variable = x0_water
[]
[x1_gas]
type = ElementIntegralVariablePostprocessor
variable = x1_gas
[]
[x0_gas]
type = ElementIntegralVariablePostprocessor
variable = x0_gas
[]
[sg]
type = ElementIntegralVariablePostprocessor
variable = saturation_gas
[]
[sw]
type = ElementIntegralVariablePostprocessor
variable = saturation_water
[]
[pwater]
type = ElementIntegralVariablePostprocessor
variable = pressure_water
[]
[pgas]
type = ElementIntegralVariablePostprocessor
variable = pressure_gas
[]
[x0mass]
type = PorousFlowFluidMass
fluid_component = 0
phase = '0 1'
[]
[x1mass]
type = PorousFlowFluidMass
fluid_component = 1
phase = '0 1'
[]
[]
[Outputs]
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_3comp_action.i)
# Pressure pulse in 1D with 1 phase but 3 components (viscosity, relperm, etc are independent of mass-fractions) - transient
# This input file uses the PorousFlowFullySaturated Action. For the non-Action version, see pressure_pulse_1d_3comp.i
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 2E6
[]
[massfrac0]
initial_condition = 0.1
[]
[massfrac1]
initial_condition = 0.3
[]
[]
[PorousFlowFullySaturated]
porepressure = pp
mass_fraction_vars = 'massfrac0 massfrac1'
gravity = '0 0 0'
fp = simple_fluid
stabilization = Full
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-15'
[]
[]
[BCs]
[left]
type = DirichletBC
boundary = left
value = 3E6
variable = pp
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E3
end_time = 1E4
[]
[Postprocessors]
[p000]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = 'initial timestep_end'
[]
[p010]
type = PointValue
variable = pp
point = '10 0 0'
execute_on = 'initial timestep_end'
[]
[p020]
type = PointValue
variable = pp
point = '20 0 0'
execute_on = 'initial timestep_end'
[]
[p030]
type = PointValue
variable = pp
point = '30 0 0'
execute_on = 'initial timestep_end'
[]
[p040]
type = PointValue
variable = pp
point = '40 0 0'
execute_on = 'initial timestep_end'
[]
[p050]
type = PointValue
variable = pp
point = '50 0 0'
execute_on = 'initial timestep_end'
[]
[p060]
type = PointValue
variable = pp
point = '60 0 0'
execute_on = 'initial timestep_end'
[]
[p070]
type = PointValue
variable = pp
point = '70 0 0'
execute_on = 'initial timestep_end'
[]
[p080]
type = PointValue
variable = pp
point = '80 0 0'
execute_on = 'initial timestep_end'
[]
[p090]
type = PointValue
variable = pp
point = '90 0 0'
execute_on = 'initial timestep_end'
[]
[p100]
type = PointValue
variable = pp
point = '100 0 0'
execute_on = 'initial timestep_end'
[]
[mf_0_010]
type = PointValue
variable = massfrac0
point = '10 0 0'
execute_on = 'timestep_end'
[]
[mf_1_010]
type = PointValue
variable = massfrac1
point = '10 0 0'
execute_on = 'timestep_end'
[]
[]
[Outputs]
file_base = pressure_pulse_1d_3comp
print_linear_residuals = true
csv = true
[]
(modules/porous_flow/test/tests/dirackernels/bh_except08.i)
# PorousFlowPeacemanBorehole exception test
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = TimeDerivative
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
at_nodes = false # Needed to force expected error
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
bottom_p_or_t = 0
fluid_phase = 0
point_file = bh02.bh
use_mobility = true
SumQuantityUO = borehole_total_outflow_mass
variable = pp
unit_weight = '0 0 0'
character = 1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
expression = abs((a-c+d)/2/(a+c))
symbol_names = 'a c d'
symbol_values = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
(modules/porous_flow/test/tests/actions/block_restricted.i)
PorousFlowDictatorName = 'dictator'
[GlobalParams]
time_unit = days
displacements = 'disp_x disp_y disp_z'
use_displaced_mesh = false
[]
[Problem]
kernel_coverage_check = false
material_coverage_check = false
[]
[Mesh]
active_block_names = 'BaseMesh Box1'
[BaseMesh]
type = GeneratedMeshGenerator
subdomain_name = 'BaseMesh'
elem_type = "TET10"
dim = 3
nx = 6
ny = 6
nz = 2
xmin = -10
xmax = +10
ymin = -10
ymax = +10
zmin = -2
zmax = +2
[]
[Box1]
type = SubdomainBoundingBoxGenerator
input = "BaseMesh"
block_id = 1
block_name = "Box1"
location = "INSIDE"
bottom_left = "-3.3 -3.3 +2"
top_right = "+3.3 +3.3 0"
[]
[Box1Boundary]
type = SideSetsBetweenSubdomainsGenerator
input = Box1
primary_block = 'BaseMesh'
paired_block = 'Box1'
new_boundary = 'Box1Boundary'
[]
[]
[Physics]
[SolidMechanics]
[QuasiStatic]
[all]
strain = SMALL
incremental = true
block = ${Mesh/active_block_names}
[]
[]
[]
[]
[AuxVariables]
[stress_xx]
order = CONSTANT
family = MONOMIAL
block = 'BaseMesh'
[]
[stress_yy]
order = CONSTANT
family = MONOMIAL
block = 'BaseMesh'
[]
[stress_zz]
order = CONSTANT
family = MONOMIAL
block = 'BaseMesh'
[]
[]
[PorousFlowFullySaturated]
coupling_type = HydroMechanical
porepressure = porepressure
biot_coefficient = 1
fp = simple_fluid
stabilization = FULL
gravity = '0 0 0'
add_darcy_aux = false
dictator_name = ${PorousFlowDictatorName}
block = 'BaseMesh'
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[porepressure]
order = SECOND
family = LAGRANGE
scaling = 1e-5
block = 'BaseMesh'
[]
[]
[ICs]
[porepressure]
type = FunctionIC
variable = porepressure
function = '2'
block = 'BaseMesh'
[]
[]
[BCs]
[fix_x]
type = DirichletBC
variable = disp_x
boundary = 'left right'
value = 0.0
[]
[fix_y]
type = DirichletBC
variable = disp_y
boundary = 'bottom top'
value = 0.0
[]
[fix_z]
type = DirichletBC
variable = disp_z
boundary = 'back'
value = 0.0
[]
[porepressure_fix]
type = DirichletBC
variable = porepressure
boundary = 'left right bottom top'
value = 2.0
[]
[porepressure_Box1Boundary]
type = FunctionDirichletBC
variable = porepressure
boundary = 'Box1Boundary'
function = porepressure_at_Box1Boundary
[]
[]
[Functions]
[porepressure_at_Box1Boundary]
type = ParsedFunction
expression = '2 + max(0, min(1, t-0.25))'
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2E3
density0 = 1000
thermal_expansion = 0
viscosity = 9.0E-10
[]
[]
[Materials]
[porosity_bulk]
type = PorousFlowPorosityConst
block = ${Mesh/active_block_names}
porosity = 0.15
PorousFlowDictator = ${PorousFlowDictatorName}
[]
[undrained_density_0]
type = GenericConstantMaterial
block = ${Mesh/active_block_names}
prop_names = density
prop_values = 2500
[]
[BaseMesh_permeability_bulk]
type = PorousFlowPermeabilityConst
block = 'BaseMesh'
permeability = '1e-5 0 0 0 1e-5 0 0 0 1e-5'
PorousFlowDictator = ${PorousFlowDictatorName}
[]
[BaseMesh_elasticity_tensor]
type = ComputeIsotropicElasticityTensor
block = 'BaseMesh'
youngs_modulus = 2500
poissons_ratio = 0.15
[]
[Box1_permeability_bulk]
type = PorousFlowPermeabilityConst
block = 'Box1'
permeability = '1e-5 0 0 0 1e-5 0 0 0 1e-5'
PorousFlowDictator = ${PorousFlowDictatorName}
[]
[Box1_elasticity_tensor]
type = ComputeIsotropicElasticityTensor
block = 'Box1'
youngs_modulus = 2500
poissons_ratio = 0.15
[]
[stress]
type = ComputeMultipleInelasticStress
inelastic_models = ''
perform_finite_strain_rotations = false
tangent_operator = 'nonlinear'
block = ${Mesh/active_block_names}
[]
[]
[Preconditioning]
[.\SMP]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = PJFNK
petsc_options = '-snes_converged_reason'
# best overall
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu mumps'
line_search = none
nl_abs_tol = 1e-4
nl_rel_tol = 1e-6
l_max_its = 20
nl_max_its = 8
start_time = 0.0
end_time = 0.5
[TimeSteppers]
[ConstantDT1]
type = ConstantDT
dt = 0.25
[]
[]
[]
[Outputs]
perf_graph = true
exodus = true
[]
(modules/porous_flow/examples/restart/gas_injection_new_mesh.i)
# Using the results from the equilibrium run to provide the initial condition for
# porepressure, we now inject a gas phase into the brine-saturated reservoir. In this
# example, the mesh is not identical to the mesh used in gravityeq.i. Rather, it is
# generated so that it is more refined near the injection boundary and at the top of
# the model, as that is where the gas plume will be present.
#
# To use the hydrostatic pressure calculated using the gravity equilibrium run as the initial
# condition for the pressure, a SolutionUserObject is used, along with a SolutionFunction to
# interpolate the pressure from the gravity equilibrium run to the initial condition for liqiud
# porepressure in this example.
#
# Even though the gravity equilibrium is established using a 2D mesh, in this example,
# we use a mesh shifted 0.1 m to the right and rotate it about the Y axis to make a 2D radial
# model.
#
# Methane injection takes place over the surface of the hole created by rotating the mesh,
# and hence the injection area is 2 pi r h. We can calculate this using an AreaPostprocessor,
# and then use this in a ParsedFunction to calculate the injection rate so that 10 kg/s of
# methane is injected.
#
# Note: as this example uses the results from a previous simulation, gravityeq.i MUST be
# run before running this input file.
[Mesh]
type = GeneratedMesh
dim = 2
ny = 25
nx = 50
ymax = 100
xmin = 0.1
xmax = 5000
bias_x = 1.05
bias_y = 0.95
coord_type = RZ
rz_coord_axis = Y
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 -9.81 0'
temperature_unit = Celsius
[]
[Variables]
[pp_liq]
[]
[sat_gas]
initial_condition = 0
[]
[]
[ICs]
[ppliq_ic]
type = FunctionIC
variable = pp_liq
function = ppliq_ic
[]
[]
[AuxVariables]
[temperature]
initial_condition = 50
[]
[xnacl]
initial_condition = 0.1
[]
[brine_density]
family = MONOMIAL
order = CONSTANT
[]
[methane_density]
family = MONOMIAL
order = CONSTANT
[]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[pp_gas]
family = MONOMIAL
order = CONSTANT
[]
[sat_liq]
family = MONOMIAL
order = CONSTANT
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pp_liq
[]
[flux0]
type = PorousFlowAdvectiveFlux
variable = pp_liq
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = sat_gas
fluid_component = 1
[]
[flux1]
type = PorousFlowAdvectiveFlux
variable = sat_gas
fluid_component = 1
[]
[]
[AuxKernels]
[brine_density]
type = PorousFlowPropertyAux
property = density
variable = brine_density
execute_on = 'initial timestep_end'
[]
[methane_density]
type = PorousFlowPropertyAux
property = density
variable = methane_density
phase = 1
execute_on = 'initial timestep_end'
[]
[pp_gas]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = pp_gas
execute_on = 'initial timestep_end'
[]
[sat_liq]
type = PorousFlowPropertyAux
property = saturation
variable = sat_liq
execute_on = 'initial timestep_end'
[]
[]
[BCs]
[gas_injection]
type = PorousFlowSink
boundary = left
variable = sat_gas
flux_function = injection_rate
fluid_phase = 1
[]
[brine_out]
type = PorousFlowPiecewiseLinearSink
boundary = right
variable = pp_liq
multipliers = '0 1e9'
pt_vals = '0 1e9'
fluid_phase = 0
flux_function = 1e-6
use_mobility = true
use_relperm = true
mass_fraction_component = 0
[]
[]
[Functions]
[injection_rate]
type = ParsedFunction
symbol_values = injection_area
symbol_names = area
expression = '-1/area'
[]
[ppliq_ic]
type = SolutionFunction
solution = soln
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp_liq sat_gas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1e-5
m = 0.5
sat_lr = 0.2
pc_max = 1e7
[]
[soln]
type = SolutionUserObject
mesh = gravityeq_out.e
system_variables = porepressure
[]
[]
[FluidProperties]
[brine]
type = BrineFluidProperties
[]
[methane]
type = MethaneFluidProperties
[]
[methane_tab]
type = TabulatedBicubicFluidProperties
fp = methane
save_file = false
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temperature
[]
[ps]
type = PorousFlow2PhasePS
phase0_porepressure = pp_liq
phase1_saturation = sat_gas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[brine]
type = PorousFlowBrine
compute_enthalpy = false
compute_internal_energy = false
xnacl = xnacl
phase = 0
[]
[methane]
type = PorousFlowSingleComponentFluid
compute_enthalpy = false
compute_internal_energy = false
fp = methane_tab
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-13 0 0 0 5e-14 0 0 0 1e-13'
[]
[relperm_liq]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.2
sum_s_res = 0.3
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
s_res = 0.1
sum_s_res = 0.3
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = ' asm lu NONZERO'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1e8
nl_abs_tol = 1e-12
nl_rel_tol = 1e-06
nl_max_its = 20
dtmax = 1e6
[TimeStepper]
type = IterationAdaptiveDT
dt = 1e1
growth_factor = 1.5
[]
[]
[Postprocessors]
[mass_ph0]
type = PorousFlowFluidMass
fluid_component = 0
execute_on = 'initial timestep_end'
[]
[mass_ph1]
type = PorousFlowFluidMass
fluid_component = 1
execute_on = 'initial timestep_end'
[]
[injection_area]
type = AreaPostprocessor
boundary = left
execute_on = initial
[]
[]
[Outputs]
execute_on = 'initial timestep_end'
exodus = true
perf_graph = true
[]
(modules/porous_flow/test/tests/sinks/s03.i)
# apply a sink flux with use_relperm=true and observe the correct behavior
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = 0
xmax = 1
ymin = 0
ymax = 1
zmin = 0
zmax = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1.1
[]
[]
[Variables]
[pp]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = -y
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.3
density0 = 1.1
thermal_expansion = 0
viscosity = 1.1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0.2 0 0 0 0.1 0 0 0 0.1'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[AuxVariables]
[flux_out]
[]
[xval]
[]
[yval]
[]
[]
[ICs]
[xval]
type = FunctionIC
variable = xval
function = x
[]
[yval]
type = FunctionIC
variable = yval
function = y
[]
[]
[Functions]
[mass00]
type = ParsedFunction
expression = 'vol*por*dens0*exp(pp/bulk)*pow(1+pow(-al*pp,1.0/(1-m)),-m)'
symbol_names = 'vol por dens0 pp bulk al m'
symbol_values = '0.25 0.1 1.1 p00 1.3 1.1 0.5'
[]
[sat00]
type = ParsedFunction
expression = 'pow(1+pow(-al*pp,1.0/(1-m)),-m)'
symbol_names = 'pp al m'
symbol_values = 'p00 1.1 0.5'
[]
[mass01]
type = ParsedFunction
expression = 'vol*por*dens0*exp(pp/bulk)*pow(1+pow(-al*pp,1.0/(1-m)),-m)'
symbol_names = 'vol por dens0 pp bulk al m'
symbol_values = '0.25 0.1 1.1 p01 1.3 1.1 0.5'
[]
[expected_mass_change00]
type = ParsedFunction
expression = 'fcn*pow(pow(1+pow(-al*pp,1.0/(1-m)),-m),2)*area*dt'
symbol_names = 'fcn perm dens0 pp bulk visc area dt al m'
symbol_values = '6 0.2 1.1 p00 1.3 1.1 0.5 1E-3 1.1 0.5'
[]
[expected_mass_change01]
type = ParsedFunction
expression = 'fcn*pow(pow(1+pow(-al*pp,1.0/(1-m)),-m),2)*area*dt'
symbol_names = 'fcn perm dens0 pp bulk visc area dt al m'
symbol_values = '6 0.2 1.1 p01 1.3 1.1 0.5 1E-3 1.1 0.5'
[]
[mass00_expect]
type = ParsedFunction
expression = 'mass_prev-mass_change'
symbol_names = 'mass_prev mass_change'
symbol_values = 'm00_prev del_m00'
[]
[mass01_expect]
type = ParsedFunction
expression = 'mass_prev-mass_change'
symbol_names = 'mass_prev mass_change'
symbol_values = 'm01_prev del_m01'
[]
[sat01]
type = ParsedFunction
expression = 'pow(1+pow(-al*pp,1.0/(1-m)),-m)'
symbol_names = 'pp al m'
symbol_values = 'p01 1.1 0.5'
[]
[expected_mass_change_rate]
type = ParsedFunction
expression = 'fcn*pow(pow(1+pow(-al*pp,1.0/(1-m)),-m),2)*area'
symbol_names = 'fcn perm dens0 pp bulk visc area dt al m'
symbol_values = '6 0.2 1.1 p00 1.3 1.1 0.5 1E-3 1.1 0.5'
[]
[]
[Postprocessors]
[p00]
type = PointValue
point = '0 0 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[m00]
type = FunctionValuePostprocessor
function = mass00
execute_on = 'initial timestep_end'
[]
[m00_prev]
type = FunctionValuePostprocessor
function = mass00
execute_on = 'timestep_begin'
outputs = 'console'
[]
[del_m00]
type = FunctionValuePostprocessor
function = expected_mass_change00
execute_on = 'timestep_end'
outputs = 'console'
[]
[m00_expect]
type = FunctionValuePostprocessor
function = mass00_expect
execute_on = 'timestep_end'
[]
[p10]
type = PointValue
point = '1 0 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[p01]
type = PointValue
point = '0 1 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[m01]
type = FunctionValuePostprocessor
function = mass01
execute_on = 'initial timestep_end'
[]
[m01_prev]
type = FunctionValuePostprocessor
function = mass01
execute_on = 'timestep_begin'
outputs = 'console'
[]
[del_m01]
type = FunctionValuePostprocessor
function = expected_mass_change01
execute_on = 'timestep_end'
outputs = 'console'
[]
[m01_expect]
type = FunctionValuePostprocessor
function = mass01_expect
execute_on = 'timestep_end'
[]
[p11]
type = PointValue
point = '1 1 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[s00]
type = FunctionValuePostprocessor
function = sat00
execute_on = 'initial timestep_end'
[]
[mass00_rate]
type = FunctionValuePostprocessor
function = expected_mass_change_rate
execute_on = 'initial timestep_end'
[]
[]
[BCs]
[flux]
type = PorousFlowSink
boundary = 'left'
variable = pp
use_mobility = false
use_relperm = true
fluid_phase = 0
flux_function = 6
save_in = flux_out
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_max_it -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu 10 NONZERO 2'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E-3
end_time = 0.018
nl_rel_tol = 1E-12
nl_abs_tol = 1E-12
[]
[Outputs]
file_base = s03
[console]
type = Console
execute_on = 'nonlinear linear'
time_step_interval = 5
[]
[csv]
type = CSV
execute_on = 'timestep_end'
time_step_interval = 2
[]
[]
(modules/porous_flow/test/tests/recover/pffltvd.i)
# Tests that PorousFlow can successfully recover using a checkpoint file.
# This test contains stateful material properties, adaptivity, integrated
# boundary conditions with nodal-sized materials, and TVD flux limiting.
#
# This test file is run three times:
# 1) The full input file is run to completion
# 2) The input file is run for half the time and checkpointing is included
# 3) The input file is run in recovery using the checkpoint data
#
# The final output of test 3 is compared to the final output of test 1 to verify
# that recovery was successful.
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
nx = 10
xmin = 0
xmax = 1
[]
# To get consistent ordering of results with distributed meshes
allow_renumbering = false
[]
[Adaptivity]
initial_steps = 1
initial_marker = tracer_marker
marker = tracer_marker
max_h_level = 1
[Markers]
[tracer_marker]
type = ValueRangeMarker
variable = tracer
lower_bound = 0.02
upper_bound = 0.98
[]
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[porepressure]
[]
[tracer]
[]
[]
[ICs]
[porepressure]
type = FunctionIC
variable = porepressure
function = '2 - x'
[]
[tracer]
type = FunctionIC
variable = tracer
function = 'if(x<0.1,0,if(x>0.3,0,1))'
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = tracer
[]
[flux0]
type = PorousFlowFluxLimitedTVDAdvection
variable = tracer
advective_flux_calculator = advective_flux_calculator_0
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = porepressure
[]
[flux1]
type = PorousFlowFluxLimitedTVDAdvection
variable = porepressure
advective_flux_calculator = advective_flux_calculator_1
[]
[]
[BCs]
[constant_injection_porepressure]
type = DirichletBC
variable = porepressure
value = 2
boundary = left
[]
[no_tracer_on_left]
type = DirichletBC
variable = tracer
value = 0
boundary = left
[]
[remove_component_1]
type = PorousFlowPiecewiseLinearSink
variable = porepressure
boundary = right
fluid_phase = 0
pt_vals = '0 1E3'
multipliers = '0 1E3'
mass_fraction_component = 1
use_mobility = true
flux_function = 1E3
[]
[remove_component_0]
type = PorousFlowPiecewiseLinearSink
variable = tracer
boundary = right
fluid_phase = 0
pt_vals = '0 1E3'
multipliers = '0 1E3'
mass_fraction_component = 0
use_mobility = true
flux_function = 1E3
[]
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2E9
thermal_expansion = 0
viscosity = 1.0
density0 = 1000.0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure tracer'
number_fluid_phases = 1
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
[]
[advective_flux_calculator_0]
type = PorousFlowAdvectiveFluxCalculatorSaturatedMultiComponent
flux_limiter_type = superbee
fluid_component = 0
[]
[advective_flux_calculator_1]
type = PorousFlowAdvectiveFluxCalculatorSaturatedMultiComponent
flux_limiter_type = superbee
fluid_component = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = porepressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = tracer
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = the_simple_fluid
phase = 0
[]
[relperm]
type = PorousFlowRelativePermeabilityConst
phase = 0
[]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-2 0 0 0 1E-2 0 0 0 1E-2'
[]
[]
[Preconditioning]
[basic]
type = SMP
full = true
petsc_options = '-ksp_diagonal_scale -ksp_diagonal_scale_fix'
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = ' asm lu NONZERO 2'
[]
[]
[VectorPostprocessors]
[tracer]
type = NodalValueSampler
sort_by = x
variable = tracer
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 0.2
dt = 0.05
[]
[Outputs]
csv = true
[]
(modules/porous_flow/test/tests/infiltration_and_drainage/wli01.i)
[Mesh]
type = GeneratedMesh
dim = 2
nx = 1000
ny = 1
xmin = -10000
xmax = 0
ymin = 0
ymax = 0.05
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = pressure
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureBW
Sn = 0.0
Ss = 1.0
C = 1.5
las = 2
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 4
density0 = 10
thermal_expansion = 0
[]
[]
[Materials]
[massfrac]
type = PorousFlowMassFraction
[]
[temperature]
type = PorousFlowTemperature
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pressure
capillary_pressure = pc
[]
[relperm]
type = PorousFlowRelativePermeabilityBW
Sn = 0.0
Ss = 1.0
Kn = 0
Ks = 1
C = 1.5
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.25
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 1 0 0 0 1'
[]
[]
[Variables]
[pressure]
initial_condition = -1E-4
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pressure
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pressure
gravity = '-0.1 0 0'
[]
[]
[AuxVariables]
[SWater]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[SWater]
type = MaterialStdVectorAux
property = PorousFlow_saturation_qp
index = 0
variable = SWater
[]
[]
[BCs]
[base]
type = DirichletBC
boundary = 'left'
value = -1E-4
variable = pressure
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu NONZERO 2 1E-10 1E-10 10000'
[]
[]
[VectorPostprocessors]
[swater]
type = LineValueSampler
warn_discontinuous_face_values = false
variable = SWater
start_point = '-5000 0 0'
end_point = '0 0 0'
sort_by = x
num_points = 71
execute_on = timestep_end
[]
[]
[Executioner]
type = Transient
solve_type = Newton
petsc_options = '-snes_converged_reason'
end_time = 1000
dt = 1
[]
[Outputs]
file_base = wli01
sync_times = '100 500 1000'
[exodus]
type = Exodus
sync_only = true
[]
[along_line]
type = CSV
sync_only = true
[]
[]
(modules/porous_flow/examples/restart/gravityeq.i)
# Initial run to establish gravity equilibrium. As only brine is present (no gas),
# we can use the single phase equation of state and kernels, reducing the computational
# cost. An estimate of the hydrostatic pressure gradient is used as the initial condition
# using an approximate brine density of 1060 kg/m^3.
# The end time is set to a large value (~100 years) to allow the pressure to reach
# equilibrium. Steady state detection is used to halt the run when a steady state is reached.
[Mesh]
type = GeneratedMesh
dim = 2
ny = 10
nx = 10
ymax = 100
xmax = 5000
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 -9.81 0'
temperature_unit = Celsius
[]
[Variables]
[porepressure]
[]
[]
[ICs]
[porepressure]
type = FunctionIC
function = ppic
variable = porepressure
[]
[]
[Functions]
[ppic]
type = ParsedFunction
expression = '10e6 + 1060*9.81*(100-y)'
[]
[]
[BCs]
[top]
type = DirichletBC
variable = porepressure
value = 10e6
boundary = top
[]
[]
[AuxVariables]
[temperature]
initial_condition = 50
[]
[xnacl]
initial_condition = 0.1
[]
[brine_density]
family = MONOMIAL
order = CONSTANT
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = porepressure
[]
[flux0]
type = PorousFlowFullySaturatedDarcyFlow
variable = porepressure
[]
[]
[AuxKernels]
[brine_density]
type = PorousFlowPropertyAux
property = density
variable = brine_density
execute_on = 'initial timestep_end'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = porepressure
number_fluid_phases = 1
number_fluid_components = 1
[]
[]
[FluidProperties]
[brine]
type = BrineFluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temperature
[]
[ps]
type = PorousFlow1PhaseFullySaturated
porepressure = porepressure
[]
[massfrac]
type = PorousFlowMassFraction
[]
[brine]
type = PorousFlowBrine
compute_enthalpy = false
compute_internal_energy = false
xnacl = xnacl
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-13 0 0 0 1e-13 0 0 0 1e-13'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 3e9
nl_abs_tol = 1e-12
nl_rel_tol = 1e-06
steady_state_detection = true
steady_state_tolerance = 1e-12
[TimeStepper]
type = IterationAdaptiveDT
dt = 1e1
[]
[]
[Outputs]
execute_on = 'initial timestep_end'
exodus = true
perf_graph = true
[]
(modules/porous_flow/test/tests/jacobian/brineco2_liquid_2.i)
# Tests correct calculation of properties derivatives in PorousFlowFluidState
# for conditions that give a single liquid phase, including salt as a nonlinear variable
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[pgas]
[]
[zi]
[]
[xnacl]
[]
[]
[ICs]
[pgas]
type = RandomIC
min = 5e6
max = 8e6
variable = pgas
[]
[z]
type = RandomIC
min = 0.01
max = 0.03
variable = zi
[]
[xnacl]
type = RandomIC
min = 0.01
max = 0.15
variable = xnacl
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pgas
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = zi
fluid_component = 1
[]
[mass2]
type = PorousFlowMassTimeDerivative
variable = xnacl
fluid_component = 2
[]
[adv0]
type = PorousFlowAdvectiveFlux
variable = pgas
fluid_component = 0
[]
[adv1]
type = PorousFlowAdvectiveFlux
variable = zi
fluid_component = 1
[]
[adv2]
type = PorousFlowAdvectiveFlux
variable = xnacl
fluid_component = 2
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas zi xnacl'
number_fluid_phases = 2
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
pc_max = 1e3
[]
[fs]
type = PorousFlowBrineCO2
brine_fp = brine
co2_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[brine]
type = BrineFluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 50
[]
[brineco2]
type = PorousFlowFluidState
gas_porepressure = pgas
z = zi
temperature_unit = Celsius
xnacl = xnacl
capillary_pressure = pc
fluid_state = fs
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
(modules/porous_flow/examples/lava_lamp/2phase_convection.i)
# Two phase density-driven convection of dissolved CO2 in brine
#
# Initially, the model has a gas phase at the top with a saturation of 0.29
# (which corresponds to an initial value of zi = 0.2).
# Diffusion of the dissolved CO2
# component from the saturated liquid to the unsaturated liquid below reduces the
# amount of CO2 in the gas phase. As the density of the CO2-saturated brine is greater
# than the unsaturated brine, a gravitational instability arises and density-driven
# convection of CO2-rich fingers descend into the unsaturated brine.
#
# The instability is seeded by a random perturbation to the porosity field.
# Mesh adaptivity is used to refine the mesh as the fingers form.
#
# Note: this model is computationally expensive, so should be run with multiple cores,
# preferably on a cluster.
[GlobalParams]
PorousFlowDictator = 'dictator'
gravity = '0 -9.81 0'
[]
[Adaptivity]
max_h_level = 2
marker = marker
initial_marker = initial
initial_steps = 2
[Indicators]
[indicator]
type = GradientJumpIndicator
variable = zi
[]
[]
[Markers]
[marker]
type = ErrorFractionMarker
indicator = indicator
refine = 0.8
[]
[initial]
type = BoxMarker
bottom_left = '0 1.95 0'
top_right = '2 2 0'
inside = REFINE
outside = DO_NOTHING
[]
[]
[]
[Mesh]
type = GeneratedMesh
dim = 2
ymax = 2
xmax = 2
ny = 40
nx = 40
bias_y = 0.95
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pgas
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pgas
[]
[diff0]
type = PorousFlowDispersiveFlux
fluid_component = 0
variable = pgas
disp_long = '0 0'
disp_trans = '0 0'
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = zi
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = zi
[]
[diff1]
type = PorousFlowDispersiveFlux
fluid_component = 1
variable = zi
disp_long = '0 0'
disp_trans = '0 0'
[]
[]
[AuxVariables]
[xnacl]
initial_condition = 0.01
[]
[saturation_gas]
order = FIRST
family = MONOMIAL
[]
[xco2l]
order = FIRST
family = MONOMIAL
[]
[density_liquid]
order = FIRST
family = MONOMIAL
[]
[porosity]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[saturation_gas]
type = PorousFlowPropertyAux
variable = saturation_gas
property = saturation
phase = 1
execute_on = 'timestep_end'
[]
[xco2l]
type = PorousFlowPropertyAux
variable = xco2l
property = mass_fraction
phase = 0
fluid_component = 1
execute_on = 'timestep_end'
[]
[density_liquid]
type = PorousFlowPropertyAux
variable = density_liquid
property = density
phase = 0
execute_on = 'timestep_end'
[]
[]
[Variables]
[pgas]
[]
[zi]
scaling = 1e4
[]
[]
[ICs]
[pressure]
type = FunctionIC
function = 10e6-9.81*1000*y
variable = pgas
[]
[zi]
type = BoundingBoxIC
variable = zi
x1 = 0
x2 = 2
y1 = 1.95
y2 = 2
inside = 0.2
outside = 0
[]
[porosity]
type = RandomIC
variable = porosity
min = 0.25
max = 0.275
seed = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas zi'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[fs]
type = PorousFlowBrineCO2
brine_fp = brine
co2_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2sw]
type = CO2FluidProperties
[]
[co2]
type = TabulatedBicubicFluidProperties
fp = co2sw
[]
[brine]
type = BrineFluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = '45'
[]
[brineco2]
type = PorousFlowFluidState
gas_porepressure = 'pgas'
z = 'zi'
temperature_unit = Celsius
xnacl = 'xnacl'
capillary_pressure = pc
fluid_state = fs
[]
[porosity]
type = PorousFlowPorosityConst
porosity = porosity
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-11 0 0 0 1e-11 0 0 0 1e-11'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
phase = 0
n = 2
s_res = 0.1
sum_s_res = 0.2
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
phase = 1
n = 2
s_res = 0.1
sum_s_res = 0.2
[]
[diffusivity]
type = PorousFlowDiffusivityConst
diffusion_coeff = '2e-9 2e-9 2e-9 2e-9'
tortuosity = '1 1'
[]
[]
[Preconditioning]
active = basic
[mumps_is_best_for_parallel_jobs]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu mumps'
[]
[basic]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu NONZERO 2 '
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
end_time = 1e6
nl_max_its = 25
l_max_its = 100
dtmax = 1e4
nl_abs_tol = 1e-6
[TimeStepper]
type = IterationAdaptiveDT
dt = 10
growth_factor = 2
cutback_factor = 0.5
[]
[]
[Functions]
[flux]
type = ParsedFunction
symbol_values = 'delta_xco2 dt'
symbol_names = 'dx dt'
expression = 'dx/dt'
[]
[]
[Postprocessors]
[total_co2_in_gas]
type = PorousFlowFluidMass
phase = 1
fluid_component = 1
[]
[total_co2_in_liquid]
type = PorousFlowFluidMass
phase = 0
fluid_component = 1
[]
[numdofs]
type = NumDOFs
[]
[delta_xco2]
type = ChangeOverTimePostprocessor
postprocessor = total_co2_in_liquid
[]
[dt]
type = TimestepSize
[]
[flux]
type = FunctionValuePostprocessor
function = flux
[]
[]
[Outputs]
print_linear_residuals = false
perf_graph = true
exodus = true
csv = true
[]
(modules/porous_flow/test/tests/jacobian/outflowbc02.i)
# PorousFlowOutflowBC: testing Jacobian for single-phase, single-component, with heat
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 3
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '1 2 3'
[]
[Variables]
[pp]
[]
[T]
[]
[]
[PorousFlowFullySaturated]
coupling_type = thermohydro
add_darcy_aux = false
fp = simple_fluid
porepressure = pp
temperature = T
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1.2
cp = 0.9
cv = 1.1
viscosity = 0.4
thermal_expansion = 0.7
[]
[]
[BCs]
[outflow0]
type = PorousFlowOutflowBC
boundary = 'front back top bottom front back'
variable = pp
multiplier = 1E8 # so this BC gets weighted much more heavily than Kernels
[]
[outflowT]
type = PorousFlowOutflowBC
boundary = 'front back top bottom front back'
flux_type = heat
variable = T
multiplier = 1E8 # so this BC gets weighted much more heavily than Kernels
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.4
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0.1 0.2 0.3 1.8 0.9 1.7 0.4 0.3 1.1'
[]
[matrix_energy]
type = PorousFlowMatrixInternalEnergy
density = 0.5
specific_heat_capacity = 2.2E-3
[]
[thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '1.1 1.2 1.3 0.8 0.9 0.7 0.4 0.3 0.1'
wet_thermal_conductivity = '0.1 0.2 0.3 1.8 1.9 1.7 1.4 1.3 1.1'
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1E-7
num_steps = 1
# petsc_options = '-snes_test_jacobian -snes_force_iteration'
# petsc_options_iname = '-snes_type --ksp_type -pc_type -snes_convergence_test'
# petsc_options_value = ' ksponly preonly none skip'
[]
(modules/porous_flow/test/tests/flux_limited_TVD_pflow/except01.i)
# Exception test: phase number too big
[Mesh]
type = GeneratedMesh
dim = 1
[]
[GlobalParams]
gravity = '1 2 3'
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[tracer]
[]
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
[]
[]
[PorousFlowUnsaturated]
porepressure = pp
mass_fraction_vars = tracer
fp = the_simple_fluid
[]
[UserObjects]
[advective_flux_calculator]
type = PorousFlowAdvectiveFluxCalculatorSaturated
phase = 2
[]
[]
[Materials]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[]
[Executioner]
type = Steady
solve_type = Newton
[]
(modules/porous_flow/test/tests/gravity/grav02c.i)
# Checking that gravity head is established in the transient situation when 0<=saturation<=1 (note the less-than-or-equal-to).
# 2phase (PP), 2components, vanGenuchten, constant fluid bulk-moduli for each phase, constant viscosity, constant permeability, Corey relative perm
# For better agreement with the analytical solution (ana_pp), just increase nx
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = -1
xmax = 0
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Functions]
[dts]
type = PiecewiseLinear
y = '1E-3 1E-2 1E-1'
x = '1E-3 1E-2 1E-1'
[]
[]
[Variables]
[ppwater]
initial_condition = -0.1
[]
[ppgas]
initial_condition = 0
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = ppwater
gravity = '-1 0 0'
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = ppgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = ppgas
gravity = '-1 0 0'
[]
[]
[Functions]
[ana_ppwater]
type = ParsedFunction
symbol_names = 'g B p0 rho0'
symbol_values = '1 2 pp_water_top 1'
expression = '-B*log(exp(-p0/B)+g*rho0*x/B)' # expected pp at base
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2
density0 = 1
viscosity = 1
thermal_expansion = 0
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 0.1
viscosity = 0.5
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 1
[]
[]
[Postprocessors]
[pp_water_top]
type = PointValue
variable = ppwater
point = '0 0 0'
[]
[pp_water_base]
type = PointValue
variable = ppwater
point = '-1 0 0'
[]
[pp_water_analytical]
type = FunctionValuePostprocessor
function = ana_ppwater
point = '-1 0 0'
[]
[mass_ph0]
type = PorousFlowFluidMass
fluid_component = 0
execute_on = 'initial timestep_end'
[]
[mass_ph1]
type = PorousFlowFluidMass
fluid_component = 1
execute_on = 'initial timestep_end'
[]
[]
[Preconditioning]
active = andy
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-12 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-12 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
[TimeStepper]
type = FunctionDT
function = dts
[]
end_time = 1.0
[]
[Outputs]
execute_on = 'initial timestep_end'
file_base = grav02c
[csv]
type = CSV
[]
exodus = true
[]
(modules/porous_flow/test/tests/jacobian/line_sink01.i)
# PorousFlowPeacemanBorehole with 2-phase, 3-components, with enthalpy, internal_energy, and thermal_conductivity
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[massfrac_ph0_sp0]
[]
[massfrac_ph0_sp1]
[]
[massfrac_ph1_sp0]
[]
[massfrac_ph1_sp1]
[]
[temp]
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp ppwater ppgas massfrac_ph0_sp0 massfrac_ph0_sp1 massfrac_ph1_sp0 massfrac_ph1_sp1'
number_fluid_phases = 2
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[dummy_outflow0]
type = PorousFlowSumQuantity
[]
[dummy_outflow1]
type = PorousFlowSumQuantity
[]
[dummy_outflow2]
type = PorousFlowSumQuantity
[]
[dummy_outflow3]
type = PorousFlowSumQuantity
[]
[dummy_outflow4]
type = PorousFlowSumQuantity
[]
[dummy_outflow5]
type = PorousFlowSumQuantity
[]
[dummy_outflow6]
type = PorousFlowSumQuantity
[]
[dummy_outflow7]
type = PorousFlowSumQuantity
[]
[]
[ICs]
[temp]
type = RandomIC
variable = temp
min = 1
max = 2
[]
[ppwater]
type = RandomIC
variable = ppwater
min = -1
max = 0
[]
[ppgas]
type = RandomIC
variable = ppgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 1
[]
[massfrac_ph0_sp1]
type = RandomIC
variable = massfrac_ph0_sp1
min = 0
max = 1
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 1
[]
[massfrac_ph1_sp1]
type = RandomIC
variable = massfrac_ph1_sp1
min = 0
max = 1
[]
[]
[Kernels]
[dummy_temp]
type = TimeDerivative
variable = temp
[]
[dummy_ppwater]
type = TimeDerivative
variable = ppwater
[]
[dummy_ppgas]
type = TimeDerivative
variable = ppgas
[]
[dummy_m00]
type = TimeDerivative
variable = massfrac_ph0_sp0
[]
[dummy_m01]
type = TimeDerivative
variable = massfrac_ph0_sp1
[]
[dummy_m10]
type = TimeDerivative
variable = massfrac_ph1_sp0
[]
[dummy_m11]
type = TimeDerivative
variable = massfrac_ph1_sp1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
cv = 1.1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1.4
cv = 1.8
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph0_sp1 massfrac_ph1_sp0 massfrac_ph1_sp1'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '0.1 0.02 0.03 0.02 0.0 0.01 0.03 0.01 0.3'
[]
[]
[DiracKernels]
[dirac0]
type = PorousFlowPeacemanBorehole
fluid_phase = 0
variable = ppwater
point_file = one_point.bh
line_length = 1
SumQuantityUO = dummy_outflow0
character = 1
bottom_p_or_t = -10
unit_weight = '1 2 3'
re_constant = 0.123
[]
[dirac1]
type = PorousFlowPeacemanBorehole
fluid_phase = 1
variable = ppgas
line_length = 1
line_direction = '-1 -1 -1'
use_relative_permeability = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow1
character = -0.5
bottom_p_or_t = 10
unit_weight = '1 2 -3'
re_constant = 0.3
[]
[dirac2]
type = PorousFlowPeacemanBorehole
fluid_phase = 0
variable = massfrac_ph0_sp0
line_length = 1.3
line_direction = '1 0 1'
use_mobility = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow2
character = 0.6
bottom_p_or_t = -4
unit_weight = '-1 -2 -3'
re_constant = 0.4
[]
[dirac3]
type = PorousFlowPeacemanBorehole
fluid_phase = 0
variable = massfrac_ph0_sp1
line_length = 1.3
line_direction = '1 1 1'
use_enthalpy = true
mass_fraction_component = 0
point_file = one_point.bh
SumQuantityUO = dummy_outflow3
character = -1
bottom_p_or_t = 3
unit_weight = '0.1 0.2 0.3'
re_constant = 0.5
[]
[dirac4]
type = PorousFlowPeacemanBorehole
fluid_phase = 1
variable = massfrac_ph1_sp0
function_of = temperature
line_length = 0.9
line_direction = '1 1 1'
mass_fraction_component = 1
use_internal_energy = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow4
character = 1.1
bottom_p_or_t = -7
unit_weight = '-1 2 3'
re_constant = 0.6
[]
[dirac5]
type = PorousFlowPeacemanBorehole
fluid_phase = 1
variable = temp
line_length = 0.9
function_of = temperature
line_direction = '1 2 3'
mass_fraction_component = 2
use_internal_energy = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow5
character = 0.9
bottom_p_or_t = -8
unit_weight = '1 2 1'
re_constant = 0.7
[]
[dirac6]
type = PorousFlowPeacemanBorehole
fluid_phase = 0
variable = ppwater
point_file = one_point.bh
SumQuantityUO = dummy_outflow6
character = 0
bottom_p_or_t = 10
unit_weight = '0.0 0.0 0.0'
[]
[dirac7]
type = PorousFlowPeacemanBorehole
fluid_phase = 1
variable = massfrac_ph0_sp0
use_mobility = true
mass_fraction_component = 1
use_relative_permeability = true
use_internal_energy = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow7
character = -1
bottom_p_or_t = 10
unit_weight = '0.1 0.2 0.3'
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
#petsc_options = '-snes_test_display'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
file_base = line_sink01
[]
(modules/porous_flow/test/tests/jacobian/diff03.i)
# Test the Jacobian of the diffusive component of the PorousFlowDisperiveFlux kernel for two phases.
# By setting disp_long and disp_trans to zero, the purely diffusive component of the flux
# can be isolated. Uses saturation-dependent tortuosity and diffusion coefficients from the
# Millington-Quirk model
[Mesh]
type = GeneratedMesh
dim = 2
nx = 3
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[sgas]
[]
[massfrac0]
[]
[]
[AuxVariables]
[massfrac1]
[]
[]
[ICs]
[sgas]
type = RandomIC
variable = sgas
max = 1
min = 0
[]
[massfrac0]
type = RandomIC
variable = massfrac0
min = 0
max = 1
[]
[massfrac1]
type = RandomIC
variable = massfrac1
min = 0
max = 1
[]
[]
[Kernels]
[diff0]
type = PorousFlowDispersiveFlux
fluid_component = 0
variable = sgas
gravity = '1 0 0'
disp_long = '0 0'
disp_trans = '0 0'
[]
[diff1]
type = PorousFlowDispersiveFlux
fluid_component = 1
variable = massfrac0
gravity = '1 0 0'
disp_long = '0 0'
disp_trans = '0 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'sgas massfrac0'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1e7
density0 = 10
thermal_expansion = 0
viscosity = 1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 1e7
density0 = 1
thermal_expansion = 0
viscosity = 0.1
[]
[]
[Materials]
[temp]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = 1
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac0 massfrac1'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[poro]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[diff]
type = PorousFlowDiffusivityMillingtonQuirk
diffusion_coeff = '1e-2 1e-1 1e-2 1e-1'
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityConst
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityConst
phase = 1
[]
[]
[Preconditioning]
active = smp
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/actions/basicthm_thm.i)
# PorousFlowBasicTHM action with coupling_type = ThermoHydroMechanical
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
nx = 10
ny = 3
xmax = 10
ymax = 3
[]
[aquifer]
input = gen
type = SubdomainBoundingBoxGenerator
block_id = 1
bottom_left = '0 1 0'
top_right = '10 2 0'
[]
[injection_area]
type = SideSetsAroundSubdomainGenerator
block = 1
new_boundary = 'injection_area'
normal = '-1 0 0'
input = 'aquifer'
[]
[outflow_area]
type = SideSetsAroundSubdomainGenerator
block = 1
new_boundary = 'outflow_area'
normal = '1 0 0'
input = 'injection_area'
[]
[rename]
type = RenameBlockGenerator
old_block = '0 1'
new_block = 'caprock aquifer'
input = 'outflow_area'
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
displacements = 'disp_x disp_y'
biot_coefficient = 1.0
[]
[Variables]
[porepressure]
initial_condition = 1e6
[]
[temperature]
initial_condition = 293
scaling = 1e-6
[]
[disp_x]
scaling = 1e-6
[]
[disp_y]
scaling = 1e-6
[]
[]
[PorousFlowBasicTHM]
porepressure = porepressure
temperature = temperature
coupling_type = ThermoHydroMechanical
gravity = '0 0 0'
fp = simple_fluid
eigenstrain_names = thermal_contribution
use_displaced_mesh = false
add_stress_aux = false
[]
[BCs]
[constant_injection_porepressure]
type = DirichletBC
variable = porepressure
value = 1.5e6
boundary = injection_area
[]
[constant_injection_temperature]
type = DirichletBC
variable = temperature
value = 313
boundary = injection_area
[]
[constant_outflow_porepressure]
type = PorousFlowPiecewiseLinearSink
variable = porepressure
boundary = outflow_area
pt_vals = '0 1e9'
multipliers = '0 1e9'
flux_function = 1e-6
PT_shift = 1e6
[]
[constant_outflow_temperature]
type = DirichletBC
variable = temperature
value = 293
boundary = outflow_area
[]
[top_bottom]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'top bottom'
[]
[right]
type = DirichletBC
variable = disp_x
value = 0
boundary = right
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[biot_modulus]
type = PorousFlowConstantBiotModulus
biot_coefficient = 0.8
solid_bulk_compliance = 2e-7
fluid_bulk_modulus = 1e7
[]
[permeability_aquifer]
type = PorousFlowPermeabilityConst
block = aquifer
permeability = '1e-13 0 0 0 1e-13 0 0 0 1e-13'
[]
[permeability_caprock]
type = PorousFlowPermeabilityConst
block = caprock
permeability = '1e-15 0 0 0 1e-15 0 0 0 1e-15'
[]
[thermal_expansion]
type = PorousFlowConstantThermalExpansionCoefficient
drained_coefficient = 0.003
fluid_coefficient = 0.0002
[]
[rock_internal_energy]
type = PorousFlowMatrixInternalEnergy
density = 2500.0
specific_heat_capacity = 1200.0
[]
[thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '10 0 0 0 10 0 0 0 10'
block = 'caprock aquifer'
[]
[elasticity_tensor]
type = ComputeIsotropicElasticityTensor
youngs_modulus = 5e9
poissons_ratio = 0.0
[]
[strain]
type = ComputeSmallStrain
eigenstrain_names = thermal_contribution
[]
[thermal_contribution]
type = ComputeThermalExpansionEigenstrain
temperature = temperature
thermal_expansion_coeff = 0.001
eigenstrain_name = thermal_contribution
stress_free_temperature = 293
[]
[stress]
type = ComputeLinearElasticStress
[]
[]
[Preconditioning]
[basic]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1e4
dt = 1e3
nl_abs_tol = 1e-12
nl_rel_tol = 1E-10
[]
[Outputs]
exodus = true
[]
(modules/porous_flow/test/tests/flux_limited_TVD_pflow/pffltvd_1D.i)
# Using flux-limited TVD advection ala Kuzmin and Turek, mploying PorousFlow Kernels and UserObjects, with superbee flux-limiter
# 1D version
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[porepressure]
[]
[tracer]
[]
[]
[ICs]
[porepressure]
type = FunctionIC
variable = porepressure
function = '1 - x'
[]
[tracer]
type = FunctionIC
variable = tracer
function = 'if(x<0.1,0,if(x>0.3,0,1))'
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = tracer
[]
[flux0]
type = PorousFlowFluxLimitedTVDAdvection
variable = tracer
advective_flux_calculator = advective_flux_calculator_0
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = porepressure
[]
[flux1]
type = PorousFlowFluxLimitedTVDAdvection
variable = porepressure
advective_flux_calculator = advective_flux_calculator_1
[]
[]
[BCs]
[constant_injection_porepressure]
type = DirichletBC
variable = porepressure
value = 1
boundary = left
[]
[no_tracer_on_left]
type = DirichletBC
variable = tracer
value = 0
boundary = left
[]
[remove_component_1]
type = PorousFlowPiecewiseLinearSink
variable = porepressure
boundary = right
fluid_phase = 0
pt_vals = '0 1E3'
multipliers = '0 1E3'
mass_fraction_component = 1
use_mobility = true
flux_function = 1E3
[]
[remove_component_0]
type = PorousFlowPiecewiseLinearSink
variable = tracer
boundary = right
fluid_phase = 0
pt_vals = '0 1E3'
multipliers = '0 1E3'
mass_fraction_component = 0
use_mobility = true
flux_function = 1E3
[]
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2E9
thermal_expansion = 0
viscosity = 1.0
density0 = 1000.0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure tracer'
number_fluid_phases = 1
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
[]
[advective_flux_calculator_0]
type = PorousFlowAdvectiveFluxCalculatorSaturatedMultiComponent
flux_limiter_type = superbee
fluid_component = 0
[]
[advective_flux_calculator_1]
type = PorousFlowAdvectiveFluxCalculatorSaturatedMultiComponent
flux_limiter_type = superbee
fluid_component = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = porepressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = tracer
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = the_simple_fluid
phase = 0
[]
[relperm]
type = PorousFlowRelativePermeabilityConst
phase = 0
[]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-2 0 0 0 1E-2 0 0 0 1E-2'
[]
[]
[Preconditioning]
active = basic
[basic]
type = SMP
full = true
petsc_options = '-ksp_diagonal_scale -ksp_diagonal_scale_fix'
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = ' asm lu NONZERO 2'
[]
[preferred_but_might_not_be_installed]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu mumps'
[]
[]
[VectorPostprocessors]
[tracer]
type = LineValueSampler
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 11
sort_by = x
variable = tracer
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 6
dt = 6E-2
nl_abs_tol = 1E-8
timestep_tolerance = 1E-3
[]
[Outputs]
[out]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/test/tests/poro_elasticity/terzaghi.i)
# Terzaghi's problem of consolodation of a drained medium
#
# A saturated soil sample sits in a bath of water.
# It is constrained on its sides, and bottom.
# Its sides and bottom are also impermeable.
# Initially it is unstressed.
# A normal stress, q, is applied to the soil's top.
# The soil then slowly compresses as water is squeezed
# out from the sample from its top (the top BC for
# the porepressure is porepressure = 0).
#
# See, for example. Section 2.2 of the online manuscript
# Arnold Verruijt "Theory and Problems of Poroelasticity" Delft University of Technology 2013
# but note that the "sigma" in that paper is the negative
# of the stress in TensorMechanics
#
# Here are the problem's parameters, and their values:
# Soil height. h = 10
# Soil's Lame lambda. la = 2
# Soil's Lame mu, which is also the Soil's shear modulus. mu = 3
# Soil bulk modulus. K = la + 2*mu/3 = 4
# Soil confined compressibility. m = 1/(K + 4mu/3) = 0.125
# Soil bulk compliance. 1/K = 0.25
# Fluid bulk modulus. Kf = 8
# Fluid bulk compliance. 1/Kf = 0.125
# Fluid mobility (soil permeability/fluid viscosity). k = 1.5
# Soil initial porosity. phi0 = 0.1
# Biot coefficient. alpha = 0.6
# Soil initial storativity, which is the reciprocal of the initial Biot modulus. S = phi0/Kf + (alpha - phi0)(1 - alpha)/K = 0.0625
# Consolidation coefficient. c = k/(S + alpha^2 m) = 13.95348837
# Normal stress on top. q = 1
# Initial porepressure, resulting from instantaneous application of q, assuming corresponding instantaneous increase of porepressure (Note that this is calculated by MOOSE: we only need it for the analytical solution). p0 = alpha*m*q/(S + alpha^2 m) = 0.69767442
# Initial vertical displacement (down is positive), resulting from instantaneous application of q (Note this is calculated by MOOSE: we only need it for the analytical solution). uz0 = q*m*h*S/(S + alpha^2 m)
# Final vertical displacement (down in positive) (Note this is calculated by MOOSE: we only need it for the analytical solution). uzinf = q*m*h
#
# The solution for porepressure is
# P = 4*p0/\pi \sum_{k=1}^{\infty} \frac{(-1)^{k-1}}{2k-1} \cos ((2k-1)\pi z/(2h)) \exp(-(2k-1)^2 \pi^2 ct/(4 h^2))
# This series converges very slowly for ct/h^2 small, so in that domain
# P = p0 erf( (1-(z/h))/(2 \sqrt(ct/h^2)) )
#
# The degree of consolidation is defined as
# U = (uz - uz0)/(uzinf - uz0)
# where uz0 and uzinf are defined above, and
# uz = the vertical displacement of the top (down is positive)
# U = 1 - (8/\pi^2)\sum_{k=1}^{\infty} \frac{1}{(2k-1)^2} \exp(-(2k-1)^2 \pi^2 ct/(4 h^2))
#
# FINAL NOTE: The above solution assumes constant Biot Modulus.
# In porous_flow this is not true. Therefore the solution is
# a little different than in the paper. This test was therefore
# validated against MOOSE's poromechanics, which can choose either
# a constant Biot Modulus (which has been shown to agree with
# the analytic solution), or a non-constant Biot Modulus (which
# gives the same results as porous_flow).
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 10
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = 0
zmax = 10
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
PorousFlowDictator = dictator
block = 0
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure disp_x disp_y disp_z'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.8
alpha = 1
[]
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[porepressure]
[]
[]
[BCs]
[confinex]
type = DirichletBC
variable = disp_x
value = 0
boundary = 'left right'
[]
[confiney]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'bottom top'
[]
[basefixed]
type = DirichletBC
variable = disp_z
value = 0
boundary = back
[]
[topdrained]
type = DirichletBC
variable = porepressure
value = 0
boundary = front
[]
[topload]
type = NeumannBC
variable = disp_z
value = -1
boundary = front
[]
[]
[Kernels]
[grad_stress_x]
type = StressDivergenceTensors
variable = disp_x
component = 0
[]
[grad_stress_y]
type = StressDivergenceTensors
variable = disp_y
component = 1
[]
[grad_stress_z]
type = StressDivergenceTensors
variable = disp_z
component = 2
[]
[poro_x]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.6
variable = disp_x
component = 0
[]
[poro_y]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.6
variable = disp_y
component = 1
[]
[poro_z]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.6
component = 2
variable = disp_z
[]
[poro_vol_exp]
type = PorousFlowMassVolumetricExpansion
variable = porepressure
fluid_component = 0
[]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = porepressure
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = porepressure
gravity = '0 0 0'
fluid_component = 0
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 8
density0 = 1
thermal_expansion = 0
viscosity = 0.96
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '2 3'
# bulk modulus is lambda + 2*mu/3 = 2 + 2*3/3 = 4
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[eff_fluid_pressure_qp]
type = PorousFlowEffectiveFluidPressure
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = porepressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosity
fluid = true
mechanical = true
ensure_positive = false
porosity_zero = 0.1
biot_coefficient = 0.6
solid_bulk = 4
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.5 0 0 0 1.5 0 0 0 1.5'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0 # unimportant in this fully-saturated situation
phase = 0
[]
[]
[Postprocessors]
[p0]
type = PointValue
outputs = csv
point = '0 0 0'
variable = porepressure
use_displaced_mesh = false
[]
[p1]
type = PointValue
outputs = csv
point = '0 0 1'
variable = porepressure
use_displaced_mesh = false
[]
[p2]
type = PointValue
outputs = csv
point = '0 0 2'
variable = porepressure
use_displaced_mesh = false
[]
[p3]
type = PointValue
outputs = csv
point = '0 0 3'
variable = porepressure
use_displaced_mesh = false
[]
[p4]
type = PointValue
outputs = csv
point = '0 0 4'
variable = porepressure
use_displaced_mesh = false
[]
[p5]
type = PointValue
outputs = csv
point = '0 0 5'
variable = porepressure
use_displaced_mesh = false
[]
[p6]
type = PointValue
outputs = csv
point = '0 0 6'
variable = porepressure
use_displaced_mesh = false
[]
[p7]
type = PointValue
outputs = csv
point = '0 0 7'
variable = porepressure
use_displaced_mesh = false
[]
[p8]
type = PointValue
outputs = csv
point = '0 0 8'
variable = porepressure
use_displaced_mesh = false
[]
[p9]
type = PointValue
outputs = csv
point = '0 0 9'
variable = porepressure
use_displaced_mesh = false
[]
[p99]
type = PointValue
outputs = csv
point = '0 0 10'
variable = porepressure
use_displaced_mesh = false
[]
[zdisp]
type = PointValue
outputs = csv
point = '0 0 10'
variable = disp_z
use_displaced_mesh = false
[]
[dt]
type = FunctionValuePostprocessor
outputs = console
function = if(0.5*t<0.1,0.5*t,0.1)
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
start_time = 0
end_time = 10
[TimeStepper]
type = PostprocessorDT
postprocessor = dt
dt = 0.0001
[]
[]
[Outputs]
execute_on = 'timestep_end'
file_base = terzaghi
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/aux_kernels/properties.i)
# Example of accessing properties using the PorousFlowPropertyAux AuxKernel for
# each phase and fluid component (as required).
[Mesh]
type = GeneratedMesh
dim = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[pwater]
initial_condition = 1e6
[]
[sgas]
initial_condition = 0.3
[]
[temperature]
initial_condition = 50
[]
[]
[AuxVariables]
[x0_water]
order = FIRST
family = LAGRANGE
initial_condition = 0.1
[]
[x0_gas]
order = FIRST
family = LAGRANGE
initial_condition = 0.8
[]
[pressure_gas]
order = CONSTANT
family = MONOMIAL
[]
[capillary_pressure]
order = CONSTANT
family = MONOMIAL
[]
[saturation_water]
order = CONSTANT
family = MONOMIAL
[]
[density_water]
order = CONSTANT
family = MONOMIAL
[]
[density_gas]
order = CONSTANT
family = MONOMIAL
[]
[viscosity_water]
order = CONSTANT
family = MONOMIAL
[]
[viscosity_gas]
order = CONSTANT
family = MONOMIAL
[]
[x1_water]
order = CONSTANT
family = MONOMIAL
[]
[x1_gas]
order = CONSTANT
family = MONOMIAL
[]
[relperm_water]
order = CONSTANT
family = MONOMIAL
[]
[relperm_gas]
order = CONSTANT
family = MONOMIAL
[]
[enthalpy_water]
order = CONSTANT
family = MONOMIAL
[]
[enthalpy_gas]
order = CONSTANT
family = MONOMIAL
[]
[energy_water]
order = CONSTANT
family = MONOMIAL
[]
[energy_gas]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[pressure_gas]
type = PorousFlowPropertyAux
variable = pressure_gas
property = pressure
phase = 1
execute_on = timestep_end
[]
[capillary_pressure]
type = PorousFlowPropertyAux
variable = capillary_pressure
property = capillary_pressure
execute_on = timestep_end
[]
[saturation_water]
type = PorousFlowPropertyAux
variable = saturation_water
property = saturation
phase = 0
execute_on = timestep_end
[]
[density_water]
type = PorousFlowPropertyAux
variable = density_water
property = density
phase = 0
execute_on = timestep_end
[]
[density_gas]
type = PorousFlowPropertyAux
variable = density_gas
property = density
phase = 1
execute_on = timestep_end
[]
[viscosity_water]
type = PorousFlowPropertyAux
variable = viscosity_water
property = viscosity
phase = 0
execute_on = timestep_end
[]
[viscosity_gas]
type = PorousFlowPropertyAux
variable = viscosity_gas
property = viscosity
phase = 1
execute_on = timestep_end
[]
[relperm_water]
type = PorousFlowPropertyAux
variable = relperm_water
property = relperm
phase = 0
execute_on = timestep_end
[]
[relperm_gas]
type = PorousFlowPropertyAux
variable = relperm_gas
property = relperm
phase = 1
execute_on = timestep_end
[]
[x1_water]
type = PorousFlowPropertyAux
variable = x1_water
property = mass_fraction
phase = 0
fluid_component = 1
execute_on = timestep_end
[]
[x1_gas]
type = PorousFlowPropertyAux
variable = x1_gas
property = mass_fraction
phase = 1
fluid_component = 1
execute_on = timestep_end
[]
[enthalpy_water]
type = PorousFlowPropertyAux
variable = enthalpy_water
property = enthalpy
phase = 0
execute_on = timestep_end
[]
[enthalpy_gas]
type = PorousFlowPropertyAux
variable = enthalpy_gas
property = enthalpy
phase = 1
execute_on = timestep_end
[]
[energy_water]
type = PorousFlowPropertyAux
variable = energy_water
property = internal_energy
phase = 0
execute_on = timestep_end
[]
[energy_gas]
type = PorousFlowPropertyAux
variable = energy_gas
property = internal_energy
phase = 1
execute_on = timestep_end
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pwater
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = sgas
[]
[energy_dot]
type = PorousFlowEnergyTimeDerivative
variable = temperature
[]
[heat_advection]
type = PorousFlowHeatAdvection
variable = temperature
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pwater sgas temperature'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-5
pc_max = 1e7
sat_lr = 0.1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
cv = 2
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 1e9
viscosity = 1e-4
density0 = 20
thermal_expansion = 0
cv = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = pwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'x0_water x0_gas'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1.0
density = 125
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Outputs]
exodus = true
[]
(modules/porous_flow/test/tests/infiltration_and_drainage/rsc01.i)
# RSC test with high-res time and spatial resolution
[Mesh]
type = GeneratedMesh
dim = 2
nx = 600
ny = 1
xmin = 0
xmax = 10 # x is the depth variable, called zeta in RSC
ymin = 0
ymax = 0.05
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Functions]
[dts]
type = PiecewiseLinear
y = '3E-3 3E-2 0.05'
x = '0 1 5'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pwater poil'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureRSC
oil_viscosity = 2E-3
scale_ratio = 2E3
shift = 10
[]
[]
[FluidProperties]
[water]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 10
thermal_expansion = 0
viscosity = 1e-3
[]
[oil]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 20
thermal_expansion = 0
viscosity = 2e-3
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = pwater
phase1_porepressure = poil
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[water]
type = PorousFlowSingleComponentFluid
fp = water
phase = 0
compute_enthalpy = false
compute_internal_energy = false
[]
[oil]
type = PorousFlowSingleComponentFluid
fp = oil
phase = 1
compute_enthalpy = false
compute_internal_energy = false
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm_oil]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.25
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-5 0 0 0 1E-5 0 0 0 1E-5'
[]
[]
[Variables]
[pwater]
[]
[poil]
[]
[]
[ICs]
[water_init]
type = ConstantIC
variable = pwater
value = 0
[]
[oil_init]
type = ConstantIC
variable = poil
value = 15
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pwater
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = poil
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = poil
[]
[]
[AuxVariables]
[SWater]
family = MONOMIAL
order = CONSTANT
[]
[SOil]
family = MONOMIAL
order = CONSTANT
[]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[]
[AuxKernels]
[SWater]
type = MaterialStdVectorAux
property = PorousFlow_saturation_qp
index = 0
variable = SWater
[]
[SOil]
type = MaterialStdVectorAux
property = PorousFlow_saturation_qp
index = 1
variable = SOil
[]
[]
[BCs]
# we are pumping water into a system that has virtually incompressible fluids, hence the pressures rise enormously. this adversely affects convergence because of almost-overflows and precision-loss problems. The fixed things help keep pressures low and so prevent these awful behaviours. the movement of the saturation front is the same regardless of the fixed things.
active = 'recharge fixedoil fixedwater'
[recharge]
type = PorousFlowSink
variable = pwater
boundary = 'left'
flux_function = -1.0
[]
[fixedwater]
type = DirichletBC
variable = pwater
boundary = 'right'
value = 0
[]
[fixedoil]
type = DirichletBC
variable = poil
boundary = 'right'
value = 15
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu NONZERO 2 1E-10 1E-10 10000'
[]
[]
[VectorPostprocessors]
[swater]
type = LineValueSampler
warn_discontinuous_face_values = false
variable = SWater
start_point = '0 0 0'
end_point = '7 0 0'
sort_by = x
num_points = 21
execute_on = timestep_end
[]
[]
[Executioner]
type = Transient
solve_type = Newton
petsc_options = '-snes_converged_reason'
end_time = 5
[TimeStepper]
type = FunctionDT
function = dts
[]
[]
[Outputs]
file_base = rsc01
[along_line]
type = CSV
execute_vector_postprocessors_on = final
[]
[exodus]
type = Exodus
execute_on = 'initial final'
[]
[]
(modules/porous_flow/test/tests/fluidstate/waterncg_ic.i)
# Tests correct calculation of z (total mass fraction of NCG summed over all
# phases) using the PorousFlowFluidStateIC initial condition. Once z is
# calculated by the initial condition, the thermophysical properties are calculated
# and the resulting gas saturation should be equal to that given in the intial condition
[Mesh]
type = GeneratedMesh
dim = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
temperature_unit = Celsius
[]
[Variables]
[pgas]
initial_condition = 1e6
[]
[z]
[]
[]
[ICs]
[z]
type = PorousFlowFluidStateIC
saturation = 0.5
gas_porepressure = pgas
temperature = 50
variable = z
fluid_state = fs
[]
[]
[AuxVariables]
[saturation_gas]
order = CONSTANT
family = MONOMIAL
[]
[saturation_water]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[saturation_water]
type = PorousFlowPropertyAux
variable = saturation_water
property = saturation
phase = 0
execute_on = timestep_end
[]
[saturation_gas]
type = PorousFlowPropertyAux
variable = saturation_gas
property = saturation
phase = 1
execute_on = timestep_end
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pgas
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = z
fluid_component = 1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas z'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[fs]
type = PorousFlowWaterNCG
water_fp = water
gas_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[water]
type = Water97FluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 50
[]
[waterncg]
type = PorousFlowFluidState
gas_porepressure = pgas
z = z
fluid_state = fs
capillary_pressure = pc
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
[sg]
type = ElementIntegralVariablePostprocessor
variable = saturation_gas
execute_on = 'initial timestep_end'
[]
[sw]
type = ElementIntegralVariablePostprocessor
variable = saturation_water
execute_on = 'initial timestep_end'
[]
[z]
type = ElementIntegralVariablePostprocessor
variable = z
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
csv = true
[]
(modules/porous_flow/test/tests/mass_conservation/mass13.i)
# The sample is an annulus in RZ coordinates.
# Roller BCs are applied to the rmin, top and bottom boundaries
# A constant displacement is applied to the outer boundary: disp_r = -0.01 * t * (r - rmin)/(rmax - rmin).
# There is no fluid flow.
# Fluid mass conservation is checked.
#
# The flag volumetric_locking_correction = true is set for the strain calculator,
# which ensures that the volumetric strain is uniform throughout the element
#
# Theoretically,
# volumetric_strain = volume / volume0 - 1 = ((rmax - 0.01*t)^2 - rmin^2) / (rmax^2 - rmin^2) - 1
# However, with ComputeAxisymmetricRZSmallStrain, strain_rr = -0.01 * t / (rmax - rmin)
# and strain_tt = disp_r / r = -0.01 * t * (1 - rmin / r_qp) / (rmax - rmin), where r_qp is the radius of the quadpoint
# With volumetric_locking_correction = true, r_qp = (rmax - rmin) / 2.
# The volumetric strain is
# epv = -0.01 * t * (2 - rmin / r_qp) / (rmax - rmin)
# and volume = volume0 * (1 + epv)
#
# Fluid conservation reads
# volume0 * rho0 * exp(P0/bulk) = volume * rho0 * exp(P/bulk), so
# P - P0 = bulk * log(volume0 / volume) = 0.5 * log(1 / (1 + epv))
# With rmax = 2 and rmin = 1
# fluid_mass = volume0 * rho0 * exp(P0/bulk) = pi*3 * 1 * exp(0.1/0.5) = 11.51145
[Mesh]
type = GeneratedMesh
dim = 2
nx = 1
ny = 1
xmin = 1
xmax = 2
ymin = -0.5
ymax = 0.5
coord_type = RZ
[]
[GlobalParams]
displacements = 'disp_r disp_z'
PorousFlowDictator = dictator
block = 0
biot_coefficient = 0.3
[]
[Variables]
[disp_r]
[]
[disp_z]
[]
[porepressure]
initial_condition = 0.1
[]
[]
[BCs]
[plane_strain]
type = DirichletBC
variable = disp_z
value = 0
boundary = 'bottom top'
[]
[rmin_fixed]
type = DirichletBC
variable = disp_r
value = 0
boundary = left
[]
[contract]
type = FunctionDirichletBC
variable = disp_r
function = -0.01*t
boundary = right
[]
[]
[Kernels]
[grad_stress_r]
type = StressDivergenceRZTensors
variable = disp_r
component = 0
[]
[grad_stress_z]
type = StressDivergenceRZTensors
variable = disp_z
component = 1
[]
[poro_r]
type = PorousFlowEffectiveStressCoupling
variable = disp_r
component = 0
[]
[poro_z]
type = PorousFlowEffectiveStressCoupling
variable = disp_z
component = 1
[]
[poro_vol_exp]
type = PorousFlowMassVolumetricExpansion
variable = porepressure
fluid_component = 0
[]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = porepressure
[]
[]
[AuxVariables]
[stress_rr]
order = CONSTANT
family = MONOMIAL
[]
[stress_rz]
order = CONSTANT
family = MONOMIAL
[]
[stress_zz]
order = CONSTANT
family = MONOMIAL
[]
[stress_tt]
order = CONSTANT
family = MONOMIAL
[]
[strain_rr]
order = CONSTANT
family = MONOMIAL
[]
[strain_zz]
order = CONSTANT
family = MONOMIAL
[]
[strain_tt]
order = CONSTANT
family = MONOMIAL
[]
[vol_strain]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[stress_rr]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_rr
index_i = 0
index_j = 0
[]
[stress_rz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_rz
index_i = 0
index_j = 1
[]
[stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 1
index_j = 1
[]
[stress_tt]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_tt
index_i = 2
index_j = 2
[]
[strain_rr]
type = RankTwoAux
rank_two_tensor = total_strain
variable = strain_rr
index_i = 0
index_j = 0
[]
[strain_zz]
type = RankTwoAux
rank_two_tensor = total_strain
variable = strain_zz
index_i = 1
index_j = 1
[]
[strain_tt]
type = RankTwoAux
rank_two_tensor = total_strain
variable = strain_tt
index_i = 2
index_j = 2
[]
[vol_strain]
type = MaterialRealAux
property = PorousFlow_total_volumetric_strain_qp
variable = vol_strain
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '1 1.5'
# bulk modulus is lambda + 2*mu/3 = 1 + 2*1.5/3 = 2
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeAxisymmetricRZSmallStrain
volumetric_locking_correction = true # the strain will be the same at every qp of the element
[]
[stress]
type = ComputeLinearElasticStress
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = porepressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0.5 0 0 0 0.5 0 0 0 0.5'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure disp_r disp_z'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Postprocessors]
[p0]
type = PointValue
outputs = 'console csv'
execute_on = 'initial timestep_end'
point = '1.0 0 0'
variable = porepressure
[]
[vol_strain]
type = PointValue
outputs = 'console csv'
execute_on = 'initial timestep_end'
point = '1 0 0'
variable = vol_strain
[]
[strain_rr]
type = PointValue
outputs = 'console csv'
execute_on = 'initial timestep_end'
point = '1 0 0'
variable = strain_rr
[]
[strain_zz]
type = PointValue
outputs = 'console csv'
execute_on = 'initial timestep_end'
point = '1 0 0'
variable = strain_zz
[]
[strain_tt]
type = PointValue
outputs = 'console csv'
execute_on = 'initial timestep_end'
point = '1 0 0'
variable = strain_tt
[]
[rdisp]
type = PointValue
outputs = csv
point = '2 0 0'
use_displaced_mesh = false
variable = disp_r
[]
[stress_rr]
type = PointValue
outputs = csv
point = '1 0 0'
variable = stress_rr
[]
[stress_zz]
type = PointValue
outputs = csv
point = '1 0 0'
variable = stress_zz
[]
[stress_tt]
type = PointValue
outputs = csv
point = '1 0 0'
variable = stress_tt
[]
[fluid_mass]
type = PorousFlowFluidMass
fluid_component = 0
execute_on = 'initial timestep_end'
outputs = 'console csv'
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-14 1E-8 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
start_time = 0
end_time = 10
dt = 2
[]
[Outputs]
execute_on = 'initial timestep_end'
[csv]
type = CSV
[]
[]
(modules/porous_flow/examples/tutorial/06_KT.i)
# Darcy flow with a tracer
[Mesh]
[annular]
type = AnnularMeshGenerator
nr = 10
rmin = 1.0
rmax = 10
growth_r = 1.4
nt = 4
dmin = 0
dmax = 90
[]
[make3D]
type = MeshExtruderGenerator
extrusion_vector = '0 0 12'
num_layers = 3
bottom_sideset = 'bottom'
top_sideset = 'top'
input = annular
[]
[shift_down]
type = TransformGenerator
transform = TRANSLATE
vector_value = '0 0 -6'
input = make3D
[]
[aquifer]
type = SubdomainBoundingBoxGenerator
block_id = 1
bottom_left = '0 0 -2'
top_right = '10 10 2'
input = shift_down
[]
[injection_area]
type = ParsedGenerateSideset
combinatorial_geometry = 'x*x+y*y<1.01'
included_subdomains = 1
new_sideset_name = 'injection_area'
input = 'aquifer'
[]
[rename]
type = RenameBlockGenerator
old_block = '0 1'
new_block = 'caps aquifer'
input = 'injection_area'
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[porepressure]
[]
[tracer_concentration]
[]
[]
[ICs]
[tracer_concentration]
type = FunctionIC
function = '0.5*if(x*x+y*y<1.01,1,0)'
variable = tracer_concentration
[]
[]
[PorousFlowFullySaturated]
porepressure = porepressure
coupling_type = Hydro
gravity = '0 0 0'
fp = the_simple_fluid
mass_fraction_vars = tracer_concentration
stabilization = KT
flux_limiter_type = superbee
[]
[BCs]
[constant_injection_porepressure]
type = DirichletBC
variable = porepressure
value = 1E6
boundary = injection_area
[]
[constant_outer_porepressure]
type = DirichletBC
variable = porepressure
value = 0
boundary = rmax
[]
[injected_tracer]
type = DirichletBC
variable = tracer_concentration
value = 0.5
boundary = injection_area
[]
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2E9
viscosity = 1.0E-3
density0 = 1000.0
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[permeability_aquifer]
type = PorousFlowPermeabilityConst
block = aquifer
permeability = '1E-14 0 0 0 1E-14 0 0 0 1E-14'
[]
[permeability_caps]
type = PorousFlowPermeabilityConst
block = caps
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-16'
[]
[]
[Preconditioning]
active = basic
[basic]
type = SMP
full = true
petsc_options = '-ksp_diagonal_scale -ksp_diagonal_scale_fix'
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = ' asm lu NONZERO 2'
[]
[preferred_but_might_not_be_installed]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu mumps'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1E6
dt = 1E5
nl_rel_tol = 1E-14
[]
[Outputs]
exodus = true
[]
(modules/porous_flow/test/tests/basic_advection/1phase.i)
# Basic advection of u in a 1-phase situation
#
# grad(P) = -2
# density * gravity = 4 * 0.25
# grad(P) - density * gravity = -3
# permeability = 5
# viscosity = 150
# so Darcy velocity = 0.1
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[u]
[]
[]
[AuxVariables]
[P]
[]
[]
[ICs]
[P]
type = FunctionIC
variable = P
function = '2*(1-x)'
[]
[u]
type = FunctionIC
variable = u
function = 'if(x<0.1,1,0)'
[]
[]
[Kernels]
[u_dot]
type = TimeDerivative
variable = u
[]
[u_advection]
type = PorousFlowBasicAdvection
variable = u
phase = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = ''
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureConst
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 4
thermal_expansion = 0
viscosity = 150.0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = P
capillary_pressure = pc
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '5 0 0 0 5 0 0 0 5'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0
phase = 0
[]
[darcy_velocity]
type = PorousFlowDarcyVelocityMaterial
gravity = '0.25 0 0'
[]
[]
[BCs]
[left]
type = DirichletBC
boundary = left
value = 1
variable = u
[]
[right]
type = DirichletBC
boundary = right
value = 0
variable = u
[]
[]
[Preconditioning]
[basic]
type = SMP
full = true
petsc_options_iname = '-pc_type -snes_rtol'
petsc_options_value = ' lu 1E-10'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 5
[]
[Outputs]
exodus = true
print_linear_residuals = false
[]
(modules/porous_flow/test/tests/flux_limited_TVD_pflow/jacobian_01.i)
# Checking the Jacobian of Flux-Limited TVD Advection, 1 phase, 1 component, full saturation, using flux_limiter_type = none
# This is quite a heavy test, but we need a fairly big mesh to check the upwinding is happening correctly
[Mesh]
type = GeneratedMesh
dim = 3
nx = 3
xmin = 0
xmax = 1
ny = 4
ymin = -1
ymax = 2
bias_y = 1.5
nz = 4
zmin = 1
zmax = 2
bias_z = 0.8
[]
[GlobalParams]
gravity = '1 2 -0.5'
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[]
[ICs]
[pp]
variable = pp
type = RandomIC
min = 1
max = 2
[]
[]
[Kernels]
[flux0]
type = PorousFlowFluxLimitedTVDAdvection
variable = pp
advective_flux_calculator = advective_flux_calculator
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 0.4
viscosity = 1.1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureConst
[]
[advective_flux_calculator]
type = PorousFlowAdvectiveFluxCalculatorSaturated
flux_limiter_type = None
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[relperm]
type = PorousFlowRelativePermeabilityConst
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.21 0 0 0 1.5 0 0 0 0.8'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-snes_type'
petsc_options_value = 'test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1
num_steps = 1
dt = 1
[]
(modules/porous_flow/examples/tutorial/05.i)
# Darcy flow with heat advection and conduction, using Water97 properties
[Mesh]
[annular]
type = AnnularMeshGenerator
nr = 10
rmin = 1.0
rmax = 10
growth_r = 1.4
nt = 4
dmin = 0
dmax = 90
[]
[make3D]
type = MeshExtruderGenerator
extrusion_vector = '0 0 12'
num_layers = 3
bottom_sideset = 'bottom'
top_sideset = 'top'
input = annular
[]
[shift_down]
type = TransformGenerator
transform = TRANSLATE
vector_value = '0 0 -6'
input = make3D
[]
[aquifer]
type = SubdomainBoundingBoxGenerator
block_id = 1
bottom_left = '0 0 -2'
top_right = '10 10 2'
input = shift_down
[]
[injection_area]
type = ParsedGenerateSideset
combinatorial_geometry = 'x*x+y*y<1.01'
included_subdomains = 1
new_sideset_name = 'injection_area'
input = 'aquifer'
[]
[rename]
type = RenameBlockGenerator
old_block = '0 1'
new_block = 'caps aquifer'
input = 'injection_area'
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[porepressure]
initial_condition = 1E6
[]
[temperature]
initial_condition = 313
scaling = 1E-8
[]
[]
[PorousFlowBasicTHM]
porepressure = porepressure
temperature = temperature
coupling_type = ThermoHydro
gravity = '0 0 0'
fp = the_simple_fluid
[]
[BCs]
[constant_injection_porepressure]
type = DirichletBC
variable = porepressure
value = 2E6
boundary = injection_area
[]
[constant_injection_temperature]
type = DirichletBC
variable = temperature
value = 333
boundary = injection_area
[]
[]
[FluidProperties]
[the_simple_fluid]
type = Water97FluidProperties
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[biot_modulus]
type = PorousFlowConstantBiotModulus
biot_coefficient = 0.8
solid_bulk_compliance = 2E-7
fluid_bulk_modulus = 1E7
[]
[permeability_aquifer]
type = PorousFlowPermeabilityConst
block = aquifer
permeability = '1E-14 0 0 0 1E-14 0 0 0 1E-14'
[]
[permeability_caps]
type = PorousFlowPermeabilityConst
block = caps
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-16'
[]
[thermal_expansion]
type = PorousFlowConstantThermalExpansionCoefficient
biot_coefficient = 0.8
drained_coefficient = 0.003
fluid_coefficient = 0.0002
[]
[rock_internal_energy]
type = PorousFlowMatrixInternalEnergy
density = 2500.0
specific_heat_capacity = 1200.0
[]
[thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '10 0 0 0 10 0 0 0 10'
block = 'caps aquifer'
[]
[]
[Preconditioning]
active = basic
[basic]
type = SMP
full = true
petsc_options = '-ksp_diagonal_scale -ksp_diagonal_scale_fix'
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = ' asm lu NONZERO 2'
[]
[preferred_but_might_not_be_installed]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu mumps'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1E6
dt = 1E5
nl_abs_tol = 1E-10
[]
[Outputs]
exodus = true
[]
(modules/porous_flow/test/tests/hysteresis/except01.i)
# Exception testing of PorousFlowHysteresisOrder
# Incorrect: liquid_phase = 1
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[]
[PorousFlowBasicTHM]
porepressure = pp
fp = simple_fluid
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[biot_modulus]
type = PorousFlowConstantBiotModulus
biot_coefficient = 0.8
solid_bulk_compliance = 2e-7
fluid_bulk_modulus = 1e7
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-13 0 0 0 1e-13 0 0 0 1e-13'
[]
[hys_order]
type = PorousFlowHysteresisOrder
liquid_phase = 1
[]
[]
[Preconditioning]
[basic]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
(modules/porous_flow/test/tests/gravity/grav02d.i)
# Checking that gravity head is established in the transient situation when 0<=saturation<=1 (note the less-than-or-equal-to).
# 2phase (PP), 2components, vanGenuchten, constant fluid bulk-moduli for each phase, constant viscosity, constant permeability, Corey relative perm.
# A boundary condition enforces porepressures at the right boundary
# For better agreement with the analytical solution (ana_pp), just increase nx
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = -1
xmax = 0
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Functions]
[dts]
type = PiecewiseLinear
x = '1E-3 1E-2 1E-1 2E-1'
y = '1E-3 1E-2 0.2E-1 1E-1'
[]
[]
[Variables]
[ppwater]
initial_condition = 0
[]
[ppgas]
initial_condition = 0.5
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[]
[BCs]
[ppwater]
type = DirichletBC
boundary = right
variable = ppwater
value = 0
[]
[ppgas]
type = DirichletBC
boundary = right
variable = ppgas
value = 0.5
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = ppwater
gravity = '-1 0 0'
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = ppgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = ppgas
gravity = '-1 0 0'
[]
[]
[Functions]
[ana_ppwater]
type = ParsedFunction
symbol_names = 'g B p0 rho0'
symbol_values = '1 2 pp_water_top 1'
expression = '-B*log(exp(-p0/B)+g*rho0*x/B)' # expected pp at base
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.2
density0 = 1
viscosity = 1
thermal_expansion = 0
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 0.1
viscosity = 0.5
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 1
[]
[]
[Postprocessors]
[pp_water_top]
type = PointValue
variable = ppwater
point = '0 0 0'
[]
[pp_water_base]
type = PointValue
variable = ppwater
point = '-1 0 0'
[]
[pp_water_analytical]
type = FunctionValuePostprocessor
function = ana_ppwater
point = '-1 0 0'
[]
[ppwater_00]
type = PointValue
variable = ppwater
point = '0 0 0'
[]
[ppwater_01]
type = PointValue
variable = ppwater
point = '-0.1 0 0'
[]
[ppwater_02]
type = PointValue
variable = ppwater
point = '-0.2 0 0'
[]
[ppwater_03]
type = PointValue
variable = ppwater
point = '-0.3 0 0'
[]
[ppwater_04]
type = PointValue
variable = ppwater
point = '-0.4 0 0'
[]
[ppwater_05]
type = PointValue
variable = ppwater
point = '-0.5 0 0'
[]
[ppwater_06]
type = PointValue
variable = ppwater
point = '-0.6 0 0'
[]
[ppwater_07]
type = PointValue
variable = ppwater
point = '-0.7 0 0'
[]
[ppwater_08]
type = PointValue
variable = ppwater
point = '-0.8 0 0'
[]
[ppwater_09]
type = PointValue
variable = ppwater
point = '-0.9 0 0'
[]
[ppwater_10]
type = PointValue
variable = ppwater
point = '-1 0 0'
[]
[ppgas_00]
type = PointValue
variable = ppgas
point = '0 0 0'
[]
[ppgas_01]
type = PointValue
variable = ppgas
point = '-0.1 0 0'
[]
[ppgas_02]
type = PointValue
variable = ppgas
point = '-0.2 0 0'
[]
[ppgas_03]
type = PointValue
variable = ppgas
point = '-0.3 0 0'
[]
[ppgas_04]
type = PointValue
variable = ppgas
point = '-0.4 0 0'
[]
[ppgas_05]
type = PointValue
variable = ppgas
point = '-0.5 0 0'
[]
[ppgas_06]
type = PointValue
variable = ppgas
point = '-0.6 0 0'
[]
[ppgas_07]
type = PointValue
variable = ppgas
point = '-0.7 0 0'
[]
[ppgas_08]
type = PointValue
variable = ppgas
point = '-0.8 0 0'
[]
[ppgas_09]
type = PointValue
variable = ppgas
point = '-0.9 0 0'
[]
[ppgas_10]
type = PointValue
variable = ppgas
point = '-1 0 0'
[]
[]
[Preconditioning]
active = andy
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-12 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-12 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
[TimeStepper]
type = FunctionDT
function = dts
[]
end_time = 1.0
[]
[Outputs]
[csv]
type = CSV
execute_on = 'initial final'
file_base = grav02d
[]
[]
(modules/porous_flow/test/tests/hysteresis/except06.i)
# Exception testing of PorousFlowHysteresisOrder
# Incorrectly ordered previous_turning_points
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[]
[PorousFlowBasicTHM]
porepressure = pp
fp = simple_fluid
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[biot_modulus]
type = PorousFlowConstantBiotModulus
biot_coefficient = 0.8
solid_bulk_compliance = 2e-7
fluid_bulk_modulus = 1e7
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-13 0 0 0 1e-13 0 0 0 1e-13'
[]
[hys_order]
type = PorousFlowHysteresisOrder
initial_order = 2
previous_turning_points = '0.6 0.4'
[]
[]
[Preconditioning]
[basic]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
(modules/porous_flow/test/tests/dispersion/diff01.i)
# Test diffusive part of PorousFlowDispersiveFlux kernel by setting dispersion
# coefficients to zero. Pressure is held constant over the mesh, and gravity is
# set to zero so that no advective transport of mass takes place.
# Mass fraction is set to 1 on the left hand side and 0 on the right hand side.
[Mesh]
type = GeneratedMesh
dim = 1
nx = 20
xmax = 10
bias_x = 1.1
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[pp]
[]
[massfrac0]
[]
[]
[AuxVariables]
[velocity]
family = MONOMIAL
order = FIRST
[]
[]
[AuxKernels]
[velocity]
type = PorousFlowDarcyVelocityComponent
variable = velocity
component = x
[]
[]
[ICs]
[pp]
type = ConstantIC
variable = pp
value = 1e5
[]
[massfrac0]
type = ConstantIC
variable = massfrac0
value = 0
[]
[]
[BCs]
[left]
type = DirichletBC
value = 1
variable = massfrac0
boundary = left
[]
[right]
type = DirichletBC
value = 0
variable = massfrac0
boundary = right
[]
[pright]
type = DirichletBC
variable = pp
boundary = right
value = 1e5
[]
[pleft]
type = DirichletBC
variable = pp
boundary = left
value = 1e5
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[adv0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
[]
[diff0]
type = PorousFlowDispersiveFlux
fluid_component = 0
variable = pp
disp_trans = 0
disp_long = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = massfrac0
[]
[adv1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = massfrac0
[]
[diff1]
type = PorousFlowDispersiveFlux
fluid_component = 1
variable = massfrac0
disp_trans = 0
disp_long = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp massfrac0'
number_fluid_phases = 1
number_fluid_components = 2
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1e7
density0 = 1000
viscosity = 0.001
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseFullySaturated
porepressure = pp
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = massfrac0
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[poro]
type = PorousFlowPorosityConst
porosity = 0.3
[]
[diff]
type = PorousFlowDiffusivityConst
diffusion_coeff = '1 1'
tortuosity = 0.1
[]
[relp]
type = PorousFlowRelativePermeabilityConst
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-9 0 0 0 1e-9 0 0 0 1e-9'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu NONZERO 2 '
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1
end_time = 20
[]
[VectorPostprocessors]
[xmass]
type = NodalValueSampler
sort_by = id
variable = massfrac0
[]
[]
[Outputs]
[out]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/test/tests/fluidstate/brineco2_fv.i)
# Tests correct calculation of properties in PorousFlowBrineCO2 using FV variables
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 2
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
temperature = 30
[]
[Variables]
[pg]
type = MooseVariableFVReal
initial_condition = 20e6
[]
[z]
type = MooseVariableFVReal
initial_condition = 0.2
[]
[]
[AuxVariables]
[xnacl]
type = MooseVariableFVReal
initial_condition = 0.1
[]
[pressure_gas]
type = MooseVariableFVReal
[]
[pressure_water]
type = MooseVariableFVReal
[]
[saturation_gas]
type = MooseVariableFVReal
[]
[saturation_water]
type = MooseVariableFVReal
[]
[density_water]
type = MooseVariableFVReal
[]
[density_gas]
type = MooseVariableFVReal
[]
[viscosity_water]
type = MooseVariableFVReal
[]
[viscosity_gas]
type = MooseVariableFVReal
[]
[enthalpy_water]
type = MooseVariableFVReal
[]
[enthalpy_gas]
type = MooseVariableFVReal
[]
[internal_energy_water]
type = MooseVariableFVReal
[]
[internal_energy_gas]
type = MooseVariableFVReal
[]
[x0_water]
type = MooseVariableFVReal
[]
[x0_gas]
type = MooseVariableFVReal
[]
[x1_water]
type = MooseVariableFVReal
[]
[x1_gas]
type = MooseVariableFVReal
[]
[]
[AuxKernels]
[pressure_water]
type = ADPorousFlowPropertyAux
variable = pressure_water
property = pressure
phase = 0
execute_on = 'timestep_end'
[]
[pressure_gas]
type = ADPorousFlowPropertyAux
variable = pressure_gas
property = pressure
phase = 1
execute_on = 'timestep_end'
[]
[saturation_water]
type = ADPorousFlowPropertyAux
variable = saturation_water
property = saturation
phase = 0
execute_on = 'timestep_end'
[]
[saturation_gas]
type = ADPorousFlowPropertyAux
variable = saturation_gas
property = saturation
phase = 1
execute_on = 'timestep_end'
[]
[density_water]
type = ADPorousFlowPropertyAux
variable = density_water
property = density
phase = 0
execute_on = 'timestep_end'
[]
[density_gas]
type = ADPorousFlowPropertyAux
variable = density_gas
property = density
phase = 1
execute_on = 'timestep_end'
[]
[viscosity_water]
type = ADPorousFlowPropertyAux
variable = viscosity_water
property = viscosity
phase = 0
execute_on = 'timestep_end'
[]
[viscosity_gas]
type = ADPorousFlowPropertyAux
variable = viscosity_gas
property = viscosity
phase = 1
execute_on = 'timestep_end'
[]
[enthalpy_water]
type = ADPorousFlowPropertyAux
variable = enthalpy_water
property = enthalpy
phase = 0
execute_on = 'timestep_end'
[]
[enthalpy_gas]
type = ADPorousFlowPropertyAux
variable = enthalpy_gas
property = enthalpy
phase = 1
execute_on = 'timestep_end'
[]
[internal_energy_water]
type = ADPorousFlowPropertyAux
variable = internal_energy_water
property = internal_energy
phase = 0
execute_on = 'timestep_end'
[]
[internal_energy_gas]
type = ADPorousFlowPropertyAux
variable = internal_energy_gas
property = internal_energy
phase = 1
execute_on = 'timestep_end'
[]
[x1_water]
type = ADPorousFlowPropertyAux
variable = x1_water
property = mass_fraction
phase = 0
fluid_component = 1
execute_on = 'timestep_end'
[]
[x1_gas]
type = ADPorousFlowPropertyAux
variable = x1_gas
property = mass_fraction
phase = 1
fluid_component = 1
execute_on = 'timestep_end'
[]
[x0_water]
type = ADPorousFlowPropertyAux
variable = x0_water
property = mass_fraction
phase = 0
fluid_component = 0
execute_on = 'timestep_end'
[]
[x0_gas]
type = ADPorousFlowPropertyAux
variable = x0_gas
property = mass_fraction
phase = 1
fluid_component = 0
execute_on = 'timestep_end'
[]
[]
[FVKernels]
[mass0]
type = FVPorousFlowMassTimeDerivative
variable = pg
fluid_component = 0
[]
[mass1]
type = FVPorousFlowMassTimeDerivative
variable = z
fluid_component = 1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pg z'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[fs]
type = PorousFlowBrineCO2
brine_fp = brine
co2_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[brine]
type = BrineFluidProperties
[]
[]
[Materials]
[temperature]
type = ADPorousFlowTemperature
[]
[brineco2]
type = ADPorousFlowFluidState
gas_porepressure = pg
z = z
temperature_unit = Celsius
xnacl = xnacl
capillary_pressure = pc
fluid_state = fs
[]
[permeability]
type = ADPorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = ADPorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = ADPorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[porosity]
type = ADPorousFlowPorosityConst
porosity = 0.1
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
[density_water]
type = ElementIntegralVariablePostprocessor
variable = density_water
execute_on = 'timestep_end'
[]
[density_gas]
type = ElementIntegralVariablePostprocessor
variable = density_gas
execute_on = 'timestep_end'
[]
[viscosity_water]
type = ElementIntegralVariablePostprocessor
variable = viscosity_water
execute_on = 'timestep_end'
[]
[viscosity_gas]
type = ElementIntegralVariablePostprocessor
variable = viscosity_gas
execute_on = 'timestep_end'
[]
[enthalpy_water]
type = ElementIntegralVariablePostprocessor
variable = enthalpy_water
execute_on = 'timestep_end'
[]
[enthalpy_gas]
type = ElementIntegralVariablePostprocessor
variable = enthalpy_gas
execute_on = 'timestep_end'
[]
[internal_energy_water]
type = ElementIntegralVariablePostprocessor
variable = internal_energy_water
execute_on = 'timestep_end'
[]
[internal_energy_gas]
type = ElementIntegralVariablePostprocessor
variable = internal_energy_gas
execute_on = 'timestep_end'
[]
[x1_water]
type = ElementIntegralVariablePostprocessor
variable = x1_water
execute_on = 'timestep_end'
[]
[x0_water]
type = ElementIntegralVariablePostprocessor
variable = x0_water
execute_on = 'timestep_end'
[]
[x1_gas]
type = ElementIntegralVariablePostprocessor
variable = x1_gas
execute_on = 'timestep_end'
[]
[x0_gas]
type = ElementIntegralVariablePostprocessor
variable = x0_gas
execute_on = 'timestep_end'
[]
[sg]
type = ElementIntegralVariablePostprocessor
variable = saturation_gas
execute_on = 'timestep_end'
[]
[sw]
type = ElementIntegralVariablePostprocessor
variable = saturation_water
execute_on = 'timestep_end'
[]
[pwater]
type = ElementIntegralVariablePostprocessor
variable = pressure_water
execute_on = 'timestep_end'
[]
[pgas]
type = ElementIntegralVariablePostprocessor
variable = pressure_gas
execute_on = 'timestep_end'
[]
[x0mass]
type = FVPorousFlowFluidMass
fluid_component = 0
phase = '0 1'
[]
[x1mass]
type = FVPorousFlowFluidMass
fluid_component = 1
phase = '0 1'
[]
[]
[Outputs]
csv = true
file_base = brineco2
execute_on = 'timestep_end'
perf_graph = false
[]
(modules/porous_flow/examples/tutorial/10.i)
# Unsaturated Darcy-Richards flow without using an Action
[Mesh]
[annular]
type = AnnularMeshGenerator
nr = 10
rmin = 1.0
rmax = 10
growth_r = 1.4
nt = 4
dmin = 0
dmax = 90
[]
[make3D]
input = annular
type = MeshExtruderGenerator
extrusion_vector = '0 0 12'
num_layers = 3
bottom_sideset = 'bottom'
top_sideset = 'top'
[]
[shift_down]
type = TransformGenerator
transform = TRANSLATE
vector_value = '0 0 -6'
input = make3D
[]
[aquifer]
type = SubdomainBoundingBoxGenerator
block_id = 1
bottom_left = '0 0 -2'
top_right = '10 10 2'
input = shift_down
[]
[injection_area]
type = ParsedGenerateSideset
combinatorial_geometry = 'x*x+y*y<1.01'
included_subdomains = 1
new_sideset_name = 'injection_area'
input = 'aquifer'
[]
[rename]
type = RenameBlockGenerator
old_block = '0 1'
new_block = 'caps aquifer'
input = 'injection_area'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = pp
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1E-6
m = 0.6
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[]
[Kernels]
[time_derivative]
type = PorousFlowMassTimeDerivative
variable = pp
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = pp
gravity = '0 0 0'
[]
[]
[AuxVariables]
[sat]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[saturation]
type = PorousFlowPropertyAux
variable = sat
property = saturation
[]
[]
[BCs]
[production]
type = PorousFlowSink
variable = pp
fluid_phase = 0
flux_function = 1E-2
use_relperm = true
boundary = injection_area
[]
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2E9
viscosity = 1.0E-3
density0 = 1000.0
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[permeability_aquifer]
type = PorousFlowPermeabilityConst
block = aquifer
permeability = '1E-14 0 0 0 1E-14 0 0 0 1E-14'
[]
[permeability_caps]
type = PorousFlowPermeabilityConst
block = caps
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-16'
[]
[saturation_calculator]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[temperature]
type = PorousFlowTemperature
temperature = 293
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = the_simple_fluid
phase = 0
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 3
s_res = 0.1
sum_s_res = 0.1
phase = 0
[]
[]
[Preconditioning]
active = basic
[basic]
type = SMP
full = true
petsc_options = '-ksp_diagonal_scale -ksp_diagonal_scale_fix'
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = ' asm lu NONZERO 2'
[]
[preferred_but_might_not_be_installed]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu mumps'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1E6
dt = 1E5
nl_rel_tol = 1E-12
nl_abs_tol = 1e-10
[]
[Outputs]
exodus = true
[]
(modules/porous_flow/test/tests/mass_conservation/mass12.i)
# The sample is an annulus in RZ coordinates.
# Roller BCs are applied to the r_min, r_max and bottom boundaries
# A constant displacement is applied to the top: disp_z = -0.01*t.
# There is no fluid flow.
# Fluid mass conservation is checked.
#
# Under these conditions
# fluid_mass = volume0 * rho0 * exp(P0/bulk) = pi*3 * 1 * exp(0.1/0.5) = 11.51145
# volume0 * rho0 * exp(P0/bulk) = volume * rho0 * exp(P/bulk), so
# P - P0 = bulk * log(volume0 / volume) = 0.5 * log(1 / (1 - 0.01*t))
[Mesh]
type = GeneratedMesh
dim = 2
nx = 1
ny = 1
xmin = 1.0
xmax = 2.0
ymin = -0.5
ymax = 0.5
coord_type = RZ
[]
[GlobalParams]
displacements = 'disp_r disp_z'
PorousFlowDictator = dictator
block = 0
[]
[Variables]
[disp_r]
[]
[disp_z]
[]
[porepressure]
initial_condition = 0.1
[]
[]
[BCs]
[bottom_roller]
type = DirichletBC
variable = disp_z
value = 0
boundary = bottom
[]
[side_rollers]
type = DirichletBC
variable = disp_r
value = 0
boundary = 'left right'
[]
[top_move]
type = FunctionDirichletBC
variable = disp_z
function = -0.01*t
boundary = top
[]
[]
[Kernels]
[grad_stress_r]
type = StressDivergenceRZTensors
variable = disp_r
component = 0
[]
[grad_stress_z]
type = StressDivergenceRZTensors
variable = disp_z
component = 1
[]
[poro_r]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
variable = disp_r
component = 0
[]
[poro_z]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
variable = disp_z
component = 1
[]
[poro_vol_exp]
type = PorousFlowMassVolumetricExpansion
variable = porepressure
fluid_component = 0
[]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = porepressure
[]
[]
[AuxVariables]
[stress_rr]
order = CONSTANT
family = MONOMIAL
[]
[stress_rz]
order = CONSTANT
family = MONOMIAL
[]
[stress_zz]
order = CONSTANT
family = MONOMIAL
[]
[stress_tt]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[stress_rr]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_rr
index_i = 0
index_j = 0
[]
[stress_rz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_rz
index_i = 0
index_j = 1
[]
[stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 1
index_j = 1
[]
[stress_tt]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_tt
index_i = 2
index_j = 2
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '1 1.5'
# bulk modulus is lambda + 2*mu/3 = 1 + 2*1.5/3 = 2
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeAxisymmetricRZSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = porepressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0.5 0 0 0 0.5 0 0 0 0.5'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure disp_r disp_z'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Postprocessors]
[p0]
type = PointValue
outputs = 'console csv'
execute_on = 'initial timestep_end'
point = '1 0 0'
variable = porepressure
[]
[rdisp]
type = PointValue
outputs = csv
point = '2 0 0'
use_displaced_mesh = false
variable = disp_r
[]
[stress_rr]
type = PointValue
outputs = csv
point = '1 0 0'
variable = stress_rr
[]
[stress_zz]
type = PointValue
outputs = csv
point = '1 0 0'
variable = stress_zz
[]
[stress_tt]
type = PointValue
outputs = csv
point = '1 0 0'
variable = stress_tt
[]
[fluid_mass]
type = PorousFlowFluidMass
fluid_component = 0
execute_on = 'initial timestep_end'
outputs = 'console csv'
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-14 1E-8 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
start_time = 0
end_time = 10
dt = 2
[]
[Outputs]
execute_on = 'initial timestep_end'
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/jacobian/waterncg_liquid.i)
# Tests correct calculation of properties derivatives in PorousFlowWaterNCG
# for conditions that give a single liquid phase
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[pgas]
[]
[z]
[]
[]
[ICs]
[pgas]
type = RandomIC
min = 6e6
max = 8e6
variable = pgas
[]
[z]
type = RandomIC
min = 0.01
max = 0.05
variable = z
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pgas
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = z
fluid_component = 1
[]
[adv0]
type = PorousFlowAdvectiveFlux
variable = pgas
fluid_component = 0
[]
[adv1]
type = PorousFlowAdvectiveFlux
variable = z
fluid_component = 1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas z'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
pc_max = 1e4
[]
[fs]
type = PorousFlowWaterNCG
water_fp = water
gas_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[water]
type = Water97FluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 50
[]
[waterncg]
type = PorousFlowFluidState
gas_porepressure = pgas
z = z
temperature_unit = Celsius
capillary_pressure = pc
fluid_state = fs
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[AuxVariables]
[sgas]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[sgas]
type = PorousFlowPropertyAux
property = saturation
phase = 1
variable = sgas
[]
[]
[Postprocessors]
[sgas_min]
type = ElementExtremeValue
variable = sgas
value_type = min
[]
[sgas_max]
type = ElementExtremeValue
variable = sgas
value_type = max
[]
[]
(modules/porous_flow/test/tests/heat_advection/heat_advection_1d_KT.i)
# 1phase, heat advecting with a moving fluid
# Using the Kuzmin-Turek stabilization scheme
[Mesh]
type = GeneratedMesh
dim = 1
nx = 50
xmin = 0
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[temp]
initial_condition = 200
[]
[pp]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = '1-x'
[]
[]
[BCs]
[pp0]
type = DirichletBC
variable = pp
boundary = left
value = 1
[]
[pp1]
type = DirichletBC
variable = pp
boundary = right
value = 0
[]
[spit_heat]
type = DirichletBC
variable = temp
boundary = left
value = 300
[]
[suck_heat]
type = DirichletBC
variable = temp
boundary = right
value = 200
[]
[]
[Kernels]
[mass_dot]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[fluid_advection]
type = PorousFlowFluxLimitedTVDAdvection
variable = pp
advective_flux_calculator = fluid_advective_flux
[]
[energy_dot]
type = PorousFlowEnergyTimeDerivative
variable = temp
[]
[heat_advection]
type = PorousFlowFluxLimitedTVDAdvection
variable = temp
advective_flux_calculator = heat_advective_flux
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.6
alpha = 1.3
[]
[fluid_advective_flux]
type = PorousFlowAdvectiveFluxCalculatorSaturated
flux_limiter_type = superbee
[]
[heat_advective_flux]
type = PorousFlowAdvectiveFluxCalculatorSaturatedHeat
flux_limiter_type = superbee
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 100
density0 = 1000
viscosity = 4.4
thermal_expansion = 0
cv = 2
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1.0
density = 125
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[massfrac]
type = PorousFlowMassFraction
[]
[PS]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres bjacobi 1E-15 1E-10 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 0.01
end_time = 0.6
[]
[VectorPostprocessors]
[T]
type = LineValueSampler
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 51
sort_by = x
variable = temp
[]
[]
[Outputs]
file_base = heat_advection_1d_KT
[csv]
type = CSV
sync_times = '0.1 0.6'
sync_only = true
[]
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_3comp_fully_saturated.i)
# Pressure pulse in 1D with 1 phase, 3 component - transient
# using the PorousFlowFullySaturatedDarcyFlow Kernel
[Mesh]
type = GeneratedMesh
dim = 1
nx = 20
xmin = 0
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 2E6
[]
[f0]
initial_condition = 0
[]
[f1]
initial_condition = 0.2
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[flux0]
type = PorousFlowFullySaturatedDarcyFlow
variable = pp
gravity = '0 0 0'
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = f0
[]
[flux1]
type = PorousFlowFullySaturatedDarcyFlow
variable = f0
gravity = '0 0 0'
fluid_component = 1
[]
[mass2]
type = PorousFlowMassTimeDerivative
fluid_component = 2
variable = f1
[]
[flux2]
type = PorousFlowFullySaturatedDarcyFlow
variable = f1
gravity = '0 0 0'
fluid_component = 2
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp f0 f1'
number_fluid_phases = 1
number_fluid_components = 3
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseFullySaturated
porepressure = pp
[]
[massfrac_nodes]
type = PorousFlowMassFraction
mass_fraction_vars = 'f0 f1'
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-15'
[]
[]
[BCs]
[left]
type = DirichletBC
boundary = left
preset = false
value = 3E6
variable = pp
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -pc_factor_shift_type'
petsc_options_value = 'bcgs lu 1E-15 1E-10 10000 NONZERO'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E3
end_time = 1E4
[]
[Postprocessors]
[p005]
type = PointValue
variable = pp
point = '5 0 0'
execute_on = 'initial timestep_end'
[]
[p015]
type = PointValue
variable = pp
point = '15 0 0'
execute_on = 'initial timestep_end'
[]
[p025]
type = PointValue
variable = pp
point = '25 0 0'
execute_on = 'initial timestep_end'
[]
[p035]
type = PointValue
variable = pp
point = '35 0 0'
execute_on = 'initial timestep_end'
[]
[p045]
type = PointValue
variable = pp
point = '45 0 0'
execute_on = 'initial timestep_end'
[]
[p055]
type = PointValue
variable = pp
point = '55 0 0'
execute_on = 'initial timestep_end'
[]
[p065]
type = PointValue
variable = pp
point = '65 0 0'
execute_on = 'initial timestep_end'
[]
[p075]
type = PointValue
variable = pp
point = '75 0 0'
execute_on = 'initial timestep_end'
[]
[p085]
type = PointValue
variable = pp
point = '85 0 0'
execute_on = 'initial timestep_end'
[]
[p095]
type = PointValue
variable = pp
point = '95 0 0'
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
file_base = pressure_pulse_1d_3comp_fully_saturated
print_linear_residuals = false
csv = true
[]
(modules/porous_flow/examples/groundwater/ex01.i)
# Groundwater extraction example.
# System consists of two confined aquifers separated by an aquitard
# There is a hydraulic gradient in the upper aquifer
# A well extracts water from the lower aquifer, and the impact on the upper aquifer is observed
# In the center of the model, the roof of the upper aquifer sits 70m below the local water table
[Mesh]
[basic_mesh]
type = GeneratedMeshGenerator
dim = 3
xmin = -50
xmax = 50
nx = 20
ymin = -25
ymax = 25
ny = 10
zmin = -100
zmax = -70
nz = 3
[]
[lower_aquifer]
type = SubdomainBoundingBoxGenerator
input = basic_mesh
block_id = 1
block_name = lower_aquifer
bottom_left = '-1000 -500 -100'
top_right = '1000 500 -90'
[]
[aquitard]
type = SubdomainBoundingBoxGenerator
input = lower_aquifer
block_id = 2
block_name = aquitard
bottom_left = '-1000 -500 -90'
top_right = '1000 500 -80'
[]
[upper_aquifer]
type = SubdomainBoundingBoxGenerator
input = aquitard
block_id = 3
block_name = upper_aquifer
bottom_left = '-1000 -500 -80'
top_right = '1000 500 -70'
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = insitu_pp
[]
[]
[BCs]
[pp]
type = FunctionDirichletBC
variable = pp
function = insitu_pp
boundary = 'left right top bottom front back'
[]
[]
[Functions]
[upper_aquifer_head]
type = ParsedFunction
expression = '10 + x / 200'
[]
[lower_aquifer_head]
type = ParsedFunction
expression = '20'
[]
[insitu_head]
type = ParsedFunction
symbol_values = 'lower_aquifer_head upper_aquifer_head'
symbol_names = 'low up'
expression = 'if(z <= -90, low, if(z >= -80, up, (up * (z + 90) - low * (z + 80)) / (10.0)))'
[]
[insitu_pp]
type = ParsedFunction
symbol_values = 'insitu_head'
symbol_names = 'h'
expression = '(h - z) * 1E4'
[]
[l_rate]
type = ParsedFunction
symbol_values = 'm3_produced dt'
symbol_names = 'm3_produced dt'
expression = '1000 * m3_produced / dt'
[]
[]
[AuxVariables]
[insitu_head]
[]
[head_change]
[]
[]
[AuxKernels]
[insitu_head]
type = FunctionAux
variable = insitu_head
function = insitu_head
[]
[head_change]
type = ParsedAux
coupled_variables = 'pp insitu_head'
use_xyzt = true
expression = 'pp / 1E4 + z - insitu_head'
variable = head_change
[]
[]
[Postprocessors]
[m3_produced]
type = PorousFlowPlotQuantity
uo = volume_extracted
outputs = 'none'
[]
[dt]
type = TimestepSize
outputs = 'none'
[]
[l_per_s]
type = FunctionValuePostprocessor
function = l_rate
[]
[]
[VectorPostprocessors]
[drawdown]
type = LineValueSampler
variable = head_change
start_point = '-50 0 -75'
end_point = '50 0 -75'
num_points = 101
sort_by = x
[]
[]
[PorousFlowBasicTHM]
fp = simple_fluid
gravity = '0 0 -10'
porepressure = pp
multiply_by_density = false
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
# the following mean that density = 1000 * exp(P / 1E15) ~ 1000
thermal_expansion = 0
bulk_modulus = 1E15
[]
[]
[Materials]
[porosity_aquifers]
type = PorousFlowPorosityConst
porosity = 0.05
block = 'upper_aquifer lower_aquifer'
[]
[porosity_aquitard]
type = PorousFlowPorosityConst
porosity = 0.2
block = aquitard
[]
[biot_mod]
type = PorousFlowConstantBiotModulus
fluid_bulk_modulus = 2E9
biot_coefficient = 1.0
[]
[permeability_aquifers]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
block = 'upper_aquifer lower_aquifer'
[]
[permeability_aquitard]
type = PorousFlowPermeabilityConst
permeability = '1E-16 0 0 0 1E-16 0 0 0 1E-17'
block = aquitard
[]
[]
[DiracKernels]
[sink]
type = PorousFlowPolyLineSink
SumQuantityUO = volume_extracted
point_file = ex01.bh_lower
line_length = 10
variable = pp
# following produces a flux of 0 m^3(water)/m(borehole length)/s if porepressure = 0, and a flux of 1 m^3/m/s if porepressure = 1E9
p_or_t_vals = '0 1E9'
fluxes = '0 1'
[]
[]
[UserObjects]
[volume_extracted]
type = PorousFlowSumQuantity
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
[TimeStepper]
type = SolutionTimeAdaptiveDT
dt = 1.1E5
[]
end_time = 3.456E5 # 4 days
nl_abs_tol = 1E-13
[]
[Outputs]
[csv]
type = CSV
file_base = ex01_lower_extraction
execute_on = final
[]
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_fully_saturated.i)
# Pressure pulse in 1D with 1 phase - transient
# using the PorousFlowFullySaturatedDarcyBase Kernel
[Mesh]
type = GeneratedMesh
dim = 1
nx = 20
xmin = 0
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 2E6
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[flux]
type = PorousFlowFullySaturatedDarcyBase
variable = pp
gravity = '0 0 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseFullySaturated
porepressure = pp
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-15'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0
phase = 0
[]
[]
[BCs]
[left]
type = DirichletBC
boundary = left
value = 3E6
variable = pp
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-20 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E3
end_time = 1E4
[]
[Postprocessors]
[p005]
type = PointValue
variable = pp
point = '5 0 0'
execute_on = 'initial timestep_end'
[]
[p015]
type = PointValue
variable = pp
point = '15 0 0'
execute_on = 'initial timestep_end'
[]
[p025]
type = PointValue
variable = pp
point = '25 0 0'
execute_on = 'initial timestep_end'
[]
[p035]
type = PointValue
variable = pp
point = '35 0 0'
execute_on = 'initial timestep_end'
[]
[p045]
type = PointValue
variable = pp
point = '45 0 0'
execute_on = 'initial timestep_end'
[]
[p055]
type = PointValue
variable = pp
point = '55 0 0'
execute_on = 'initial timestep_end'
[]
[p065]
type = PointValue
variable = pp
point = '65 0 0'
execute_on = 'initial timestep_end'
[]
[p075]
type = PointValue
variable = pp
point = '75 0 0'
execute_on = 'initial timestep_end'
[]
[p085]
type = PointValue
variable = pp
point = '85 0 0'
execute_on = 'initial timestep_end'
[]
[p095]
type = PointValue
variable = pp
point = '95 0 0'
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
file_base = pressure_pulse_1d_fully_saturated
print_linear_residuals = false
csv = true
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phase.i)
# Pressure pulse in 1D with 2 phases (with one having zero saturation), 2components - transient
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
initial_condition = 2E6
[]
[ppgas]
initial_condition = 2E6
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
variable = ppwater
gravity = '0 0 0'
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = ppgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
variable = ppgas
gravity = '0 0 0'
fluid_component = 1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 2e6
density0 = 1
thermal_expansion = 0
viscosity = 1e-5
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-15'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 1
[]
[]
[BCs]
[leftwater]
type = DirichletBC
boundary = left
value = 3E6
variable = ppwater
[]
[leftgas]
type = DirichletBC
boundary = left
value = 3E6
variable = ppgas
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu NONZERO 2 1E-15 1E-20 20'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E3
end_time = 1E4
[]
[Postprocessors]
[p000]
type = PointValue
variable = ppwater
point = '0 0 0'
execute_on = 'initial timestep_end'
[]
[p010]
type = PointValue
variable = ppwater
point = '10 0 0'
execute_on = 'initial timestep_end'
[]
[p020]
type = PointValue
variable = ppwater
point = '20 0 0'
execute_on = 'initial timestep_end'
[]
[p030]
type = PointValue
variable = ppwater
point = '30 0 0'
execute_on = 'initial timestep_end'
[]
[p040]
type = PointValue
variable = ppwater
point = '40 0 0'
execute_on = 'initial timestep_end'
[]
[p050]
type = PointValue
variable = ppwater
point = '50 0 0'
execute_on = 'initial timestep_end'
[]
[p060]
type = PointValue
variable = ppwater
point = '60 0 0'
execute_on = 'initial timestep_end'
[]
[p070]
type = PointValue
variable = ppwater
point = '70 0 0'
execute_on = 'initial timestep_end'
[]
[p080]
type = PointValue
variable = ppwater
point = '80 0 0'
execute_on = 'initial timestep_end'
[]
[p090]
type = PointValue
variable = ppwater
point = '90 0 0'
execute_on = 'initial timestep_end'
[]
[p100]
type = PointValue
variable = ppwater
point = '100 0 0'
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
file_base = pressure_pulse_1d_2phase
print_linear_residuals = false
csv = true
[]
(modules/porous_flow/examples/tutorial/04.i)
# Darcy flow with heat advection and conduction, and elasticity
[Mesh]
[annular]
type = AnnularMeshGenerator
nr = 10
rmin = 1.0
rmax = 10
growth_r = 1.4
nt = 4
dmin = 0
dmax = 90
[]
[make3D]
type = MeshExtruderGenerator
extrusion_vector = '0 0 12'
num_layers = 3
bottom_sideset = 'bottom'
top_sideset = 'top'
input = annular
[]
[shift_down]
type = TransformGenerator
transform = TRANSLATE
vector_value = '0 0 -6'
input = make3D
[]
[aquifer]
type = SubdomainBoundingBoxGenerator
block_id = 1
bottom_left = '0 0 -2'
top_right = '10 10 2'
input = shift_down
[]
[injection_area]
type = ParsedGenerateSideset
combinatorial_geometry = 'x*x+y*y<1.01'
included_subdomains = 1
new_sideset_name = 'injection_area'
input = 'aquifer'
[]
[rename]
type = RenameBlockGenerator
old_block = '0 1'
new_block = 'caps aquifer'
input = 'injection_area'
[]
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
PorousFlowDictator = dictator
biot_coefficient = 1.0
[]
[Variables]
[porepressure]
[]
[temperature]
initial_condition = 293
scaling = 1E-8
[]
[disp_x]
scaling = 1E-10
[]
[disp_y]
scaling = 1E-10
[]
[disp_z]
scaling = 1E-10
[]
[]
[PorousFlowBasicTHM]
porepressure = porepressure
temperature = temperature
coupling_type = ThermoHydroMechanical
gravity = '0 0 0'
fp = the_simple_fluid
eigenstrain_names = thermal_contribution
use_displaced_mesh = false
[]
[BCs]
[constant_injection_porepressure]
type = DirichletBC
variable = porepressure
value = 1E6
boundary = injection_area
[]
[constant_injection_temperature]
type = DirichletBC
variable = temperature
value = 313
boundary = injection_area
[]
[roller_tmax]
type = DirichletBC
variable = disp_x
value = 0
boundary = dmax
[]
[roller_tmin]
type = DirichletBC
variable = disp_y
value = 0
boundary = dmin
[]
[roller_top_bottom]
type = DirichletBC
variable = disp_z
value = 0
boundary = 'top bottom'
[]
[cavity_pressure_x]
type = Pressure
boundary = injection_area
variable = disp_x
component = 0
factor = 1E6
use_displaced_mesh = false
[]
[cavity_pressure_y]
type = Pressure
boundary = injection_area
variable = disp_y
component = 1
factor = 1E6
use_displaced_mesh = false
[]
[]
[AuxVariables]
[stress_rr]
family = MONOMIAL
order = CONSTANT
[]
[stress_pp]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[stress_rr]
type = RankTwoScalarAux
rank_two_tensor = stress
variable = stress_rr
scalar_type = RadialStress
point1 = '0 0 0'
point2 = '0 0 1'
[]
[stress_pp]
type = RankTwoScalarAux
rank_two_tensor = stress
variable = stress_pp
scalar_type = HoopStress
point1 = '0 0 0'
point2 = '0 0 1'
[]
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2E9
viscosity = 1.0E-3
density0 = 1000.0
thermal_expansion = 0.0002
cp = 4194
cv = 4186
porepressure_coefficient = 0
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[biot_modulus]
type = PorousFlowConstantBiotModulus
solid_bulk_compliance = 2E-7
fluid_bulk_modulus = 1E7
[]
[permeability_aquifer]
type = PorousFlowPermeabilityConst
block = aquifer
permeability = '1E-14 0 0 0 1E-14 0 0 0 1E-14'
[]
[permeability_caps]
type = PorousFlowPermeabilityConst
block = caps
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-16'
[]
[thermal_expansion]
type = PorousFlowConstantThermalExpansionCoefficient
drained_coefficient = 0.003
fluid_coefficient = 0.0002
[]
[rock_internal_energy]
type = PorousFlowMatrixInternalEnergy
density = 2500.0
specific_heat_capacity = 1200.0
[]
[thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '10 0 0 0 10 0 0 0 10'
block = 'caps aquifer'
[]
[elasticity_tensor]
type = ComputeIsotropicElasticityTensor
youngs_modulus = 5E9
poissons_ratio = 0.0
[]
[strain]
type = ComputeSmallStrain
eigenstrain_names = thermal_contribution
[]
[thermal_contribution]
type = ComputeThermalExpansionEigenstrain
temperature = temperature
thermal_expansion_coeff = 0.001 # this is the linear thermal expansion coefficient
eigenstrain_name = thermal_contribution
stress_free_temperature = 293
[]
[stress]
type = ComputeLinearElasticStress
[]
[]
[Preconditioning]
active = basic
[basic]
type = SMP
full = true
petsc_options = '-ksp_diagonal_scale -ksp_diagonal_scale_fix'
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = ' asm lu NONZERO 2'
[]
[preferred_but_might_not_be_installed]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu mumps'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1E6
dt = 1E5
nl_abs_tol = 1E-15
nl_rel_tol = 1E-14
[]
[Outputs]
exodus = true
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phasePS.i)
# Pressure pulse in 1D with 2 phases, 2components - transient
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[ppwater]
initial_condition = 2e6
[]
[sgas]
initial_condition = 0.3
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
family = MONOMIAL
order = FIRST
initial_condition = 1
[]
[massfrac_ph1_sp0]
family = MONOMIAL
order = FIRST
initial_condition = 0
[]
[ppgas]
family = MONOMIAL
order = FIRST
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
variable = ppwater
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
variable = sgas
fluid_component = 1
[]
[]
[AuxKernels]
[ppgas]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = ppgas
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater sgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 1e5
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 2e7
density0 = 1
thermal_expansion = 0
viscosity = 1e-5
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = ppwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-15 0 0 0 1e-15 0 0 0 1e-15'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 1
[]
[]
[BCs]
[leftwater]
type = DirichletBC
boundary = left
value = 3e6
variable = ppwater
[]
[rightwater]
type = DirichletBC
boundary = right
value = 2e6
variable = ppwater
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-20 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1e3
end_time = 1e4
[]
[VectorPostprocessors]
[pp]
type = LineValueSampler
warn_discontinuous_face_values = false
sort_by = x
variable = 'ppwater ppgas'
start_point = '0 0 0'
end_point = '100 0 0'
num_points = 11
[]
[]
[Outputs]
file_base = pressure_pulse_1d_2phasePS
print_linear_residuals = false
[csv]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/test/tests/flux_limited_TVD_pflow/except02.i)
# Exception test: fluid_component number too big
[Mesh]
type = GeneratedMesh
dim = 1
[]
[GlobalParams]
gravity = '1 2 3'
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[tracer]
[]
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
[]
[]
[PorousFlowUnsaturated]
porepressure = pp
mass_fraction_vars = tracer
fp = the_simple_fluid
[]
[UserObjects]
[advective_flux_calculator]
type = PorousFlowAdvectiveFluxCalculatorSaturatedMultiComponent
fluid_component = 2
[]
[]
[Materials]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[]
[Executioner]
type = Steady
solve_type = Newton
[]
(modules/porous_flow/test/tests/poro_elasticity/pp_generation_unconfined_constM_action.i)
# This file uses a PorousFlowFullySaturated Action. The equivalent non-Action input file is pp_generation_unconfined_constM.i
#
# A sample is constrained on all sides, except its top
# and its boundaries are
# also impermeable. Fluid is pumped into the sample via a
# volumetric source (ie kg/second per cubic meter), and the
# rise in the top surface, porepressure, and stress are observed.
#
# In the standard poromechanics scenario, the Biot Modulus is held
# fixed and the source, s, has units m^3/second/m^3. Then the expected result
# is
# strain_zz = disp_z = BiotCoefficient*BiotModulus*s*t/((bulk + 4*shear/3) + BiotCoefficient^2*BiotModulus)
# porepressure = BiotModulus*(s*t - BiotCoefficient*strain_zz)
# stress_xx = (bulk - 2*shear/3)*strain_zz (remember this is effective stress)
# stress_zz = (bulk + 4*shear/3)*strain_zz (remember this is effective stress)
#
# In porous_flow, however, the source has units kg/second/m^3. The ratios remain
# fixed:
# stress_xx/strain_zz = (bulk - 2*shear/3) = 1 (for the parameters used here)
# stress_zz/strain_zz = (bulk + 4*shear/3) = 4 (for the parameters used here)
# porepressure/strain_zz = 13.3333333 (for the parameters used here)
#
# Expect
# disp_z = 0.3*10*s*t/((2 + 4*1.5/3) + 0.3^2*10) = 0.612245*s*t
# porepressure = 10*(s*t - 0.3*0.612245*s*t) = 8.163265*s*t
# stress_xx = (2 - 2*1.5/3)*0.612245*s*t = 0.612245*s*t
# stress_zz = (2 + 4*shear/3)*0.612245*s*t = 2.44898*s*t
# The relationship between the constant poroelastic source
# s (m^3/second/m^3) and the PorousFlow source, S (kg/second/m^3) is
# S = fluid_density * s = s * exp(porepressure/fluid_bulk)
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -0.5
xmax = 0.5
ymin = -0.5
ymax = 0.5
zmin = -0.5
zmax = 0.5
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
PorousFlowDictator = dictator
block = 0
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[porepressure]
[]
[]
[BCs]
[confinex]
type = DirichletBC
variable = disp_x
value = 0
boundary = 'left right'
[]
[confiney]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'bottom top'
[]
[confinez]
type = DirichletBC
variable = disp_z
value = 0
boundary = 'back'
[]
[]
[PorousFlowFullySaturated]
porepressure = porepressure
biot_coefficient = 0.3
coupling_type = HydroMechanical
displacements = 'disp_x disp_y disp_z'
gravity = '0 0 0'
fp = simple_fluid
stabilization = Full
[]
[Kernels]
[source]
type = BodyForce
function = '0.1*exp(8.163265306*0.1*t/3.3333333333)'
variable = porepressure
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 3.3333333333
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '1 1.5'
# bulk modulus is lambda + 2*mu/3 = 1 + 2*1.5/3 = 2
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
displacements = 'disp_x disp_y disp_z'
[]
[stress]
type = ComputeLinearElasticStress
[]
[porosity]
type = PorousFlowPorosityHMBiotModulus
porosity_zero = 0.1
biot_coefficient = 0.3
solid_bulk = 2
constant_fluid_bulk_modulus = 3.3333333333
constant_biot_modulus = 10.0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 1 0 0 0 1' # unimportant
[]
[]
[Postprocessors]
[p0]
type = PointValue
outputs = csv
point = '0 0 0'
variable = porepressure
[]
[zdisp]
type = PointValue
outputs = csv
point = '0 0 0.5'
variable = disp_z
[]
[stress_xx]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_xx
[]
[stress_yy]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_yy
[]
[stress_zz]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_zz
[]
[]
[Functions]
[stress_xx_over_strain_fcn]
type = ParsedFunction
expression = a/b
symbol_names = 'a b'
symbol_values = 'stress_xx zdisp'
[]
[stress_zz_over_strain_fcn]
type = ParsedFunction
expression = a/b
symbol_names = 'a b'
symbol_values = 'stress_zz zdisp'
[]
[p_over_strain_fcn]
type = ParsedFunction
expression = a/b
symbol_names = 'a b'
symbol_values = 'p0 zdisp'
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-14 1E-10 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
start_time = 0
end_time = 10
dt = 1
[]
[Outputs]
execute_on = 'timestep_end'
file_base = pp_generation_unconfined_constM_action
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/jacobian/heat_advection01_fully_saturated.i)
# 1phase, using fully-saturated version, heat advection
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[temp]
[]
[pp]
[]
[]
[ICs]
[temp]
type = RandomIC
variable = temp
max = 1.0
min = 0.0
[]
[pp]
type = RandomIC
variable = pp
max = 0.0
min = -1.0
[]
[]
[Kernels]
[pp]
type = TimeDerivative
variable = pp
[]
[heat_advection]
type = PorousFlowFullySaturatedHeatAdvection
variable = temp
gravity = '1 2 3'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 1.1
thermal_expansion = 0
viscosity = 1
cv = 1.1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[PS]
type = PorousFlow1PhaseFullySaturated
porepressure = pp
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[]
[Preconditioning]
active = check
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/examples/flow_through_fractured_media/fine_thick_fracture_transient.i)
# Using a single-dimensional mesh
# Transient flow and solute transport along a fracture in a porous matrix
# advective dominated flow in the fracture and diffusion into the porous matrix
#
# Note that fine_thick_fracture_steady.i must be run to initialise the porepressure properly
[Mesh]
file = 'gold/fine_thick_fracture_steady_out.e'
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[pp]
initial_from_file_var = pp
initial_from_file_timestep = 1
[]
[massfrac0]
[]
[]
[AuxVariables]
[velocity_x]
family = MONOMIAL
order = CONSTANT
block = fracture
[]
[velocity_y]
family = MONOMIAL
order = CONSTANT
block = fracture
[]
[]
[AuxKernels]
[velocity_x]
type = PorousFlowDarcyVelocityComponent
variable = velocity_x
component = x
[]
[velocity_y]
type = PorousFlowDarcyVelocityComponent
variable = velocity_y
component = y
[]
[]
[Problem]
# massfrac0 has an initial condition despite the restart
allow_initial_conditions_with_restart = true
[]
[ICs]
[massfrac0]
type = ConstantIC
variable = massfrac0
value = 0
[]
[]
[BCs]
[top]
type = DirichletBC
value = 0
variable = massfrac0
boundary = top
[]
[bottom]
type = DirichletBC
value = 1
variable = massfrac0
boundary = bottom
[]
[ptop]
type = DirichletBC
variable = pp
boundary = top
value = 1e6
[]
[pbottom]
type = DirichletBC
variable = pp
boundary = bottom
value = 1.002e6
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[adv0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
[]
[diff0]
type = PorousFlowDispersiveFlux
fluid_component = 0
variable = pp
disp_trans = 0
disp_long = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = massfrac0
[]
[adv1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = massfrac0
[]
[diff1]
type = PorousFlowDispersiveFlux
fluid_component = 1
variable = massfrac0
disp_trans = 0
disp_long = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp massfrac0'
number_fluid_phases = 1
number_fluid_components = 2
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseFullySaturated
porepressure = pp
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = massfrac0
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[poro_fracture]
type = PorousFlowPorosityConst
porosity = 1.0 # this is the true porosity of the fracture
block = 'fracture'
[]
[poro_matrix]
type = PorousFlowPorosityConst
porosity = 0.1
block = 'matrix1 matrix2'
[]
[diff1]
type = PorousFlowDiffusivityConst
diffusion_coeff = '1e-9 1e-9'
tortuosity = 1.0
block = 'fracture'
[]
[diff2]
type = PorousFlowDiffusivityConst
diffusion_coeff = '1e-9 1e-9'
tortuosity = 0.1
block = 'matrix1 matrix2'
[]
[relp]
type = PorousFlowRelativePermeabilityConst
phase = 0
[]
[permeability1]
type = PorousFlowPermeabilityConst
permeability = '3e-8 0 0 0 3e-8 0 0 0 3e-8' # this is the true permeability of the fracture
block = 'fracture'
[]
[permeability2]
type = PorousFlowPermeabilityConst
permeability = '1e-20 0 0 0 1e-20 0 0 0 1e-20'
block = 'matrix1 matrix2'
[]
[]
[Functions]
[dt_controller]
type = PiecewiseConstant
x = '0 30 40 100 200 83200'
y = '0.01 0.1 1 10 100 32'
[]
[]
[Preconditioning]
active = basic
[mumps_is_best_for_parallel_jobs]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu mumps'
[]
[basic]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu NONZERO 2 '
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
end_time = 86400
#dt = 0.01
[TimeStepper]
type = FunctionDT
function = dt_controller
[]
# controls for nonlinear iterations
nl_max_its = 15
nl_rel_tol = 1e-14
nl_abs_tol = 1e-9
[]
[VectorPostprocessors]
[xmass]
type = LineValueSampler
start_point = '0.4 0 0'
end_point = '0.5 0 0'
sort_by = x
num_points = 167
variable = massfrac0
[]
[]
[Outputs]
perf_graph = true
console = true
csv = true
exodus = true
[]
(modules/porous_flow/test/tests/jacobian/line_sink02.i)
# PorousFlowPolyLineSink with 2-phase, 3-components, with enthalpy, internal_energy, and thermal_conductivity
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 2
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[massfrac_ph0_sp0]
[]
[massfrac_ph0_sp1]
[]
[massfrac_ph1_sp0]
[]
[massfrac_ph1_sp1]
[]
[temp]
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp ppwater ppgas massfrac_ph0_sp0 massfrac_ph0_sp1 massfrac_ph1_sp0 massfrac_ph1_sp1'
number_fluid_phases = 2
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[dummy_outflow]
type = PorousFlowSumQuantity
[]
[]
[ICs]
[temp]
type = RandomIC
variable = temp
min = 1
max = 2
[]
[ppwater]
type = RandomIC
variable = ppwater
min = -1
max = 0
[]
[ppgas]
type = RandomIC
variable = ppgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 1
[]
[massfrac_ph0_sp1]
type = RandomIC
variable = massfrac_ph0_sp1
min = 0
max = 1
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 1
[]
[massfrac_ph1_sp1]
type = RandomIC
variable = massfrac_ph1_sp1
min = 0
max = 1
[]
[]
[Kernels]
[dummy_temp]
type = TimeDerivative
variable = temp
[]
[dummy_ppwater]
type = TimeDerivative
variable = ppwater
[]
[dummy_ppgas]
type = TimeDerivative
variable = ppgas
[]
[dummy_m00]
type = TimeDerivative
variable = massfrac_ph0_sp0
[]
[dummy_m01]
type = TimeDerivative
variable = massfrac_ph0_sp1
[]
[dummy_m10]
type = TimeDerivative
variable = massfrac_ph1_sp0
[]
[dummy_m11]
type = TimeDerivative
variable = massfrac_ph1_sp1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
cv = 1.1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1.4
cv = 1.8
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph0_sp1 massfrac_ph1_sp0 massfrac_ph1_sp1'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '0.1 0.2 0.3 0.2 0 0.1 0.3 0.1 0.1'
[]
[]
[DiracKernels]
[dirac0]
type = PorousFlowPolyLineSink
fluid_phase = 0
variable = ppwater
point_file = one_point.bh
line_length = 1
SumQuantityUO = dummy_outflow
p_or_t_vals = '-0.9 1.5'
fluxes = '-1.1 2.2'
[]
[dirac1]
type = PorousFlowPolyLineSink
fluid_phase = 1
variable = ppgas
line_length = 1
use_relative_permeability = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow
p_or_t_vals = '-1.9 1.5'
fluxes = '1.1 -2.2'
[]
[dirac2]
type = PorousFlowPolyLineSink
fluid_phase = 0
variable = massfrac_ph0_sp0
line_length = 1.3
use_mobility = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow
p_or_t_vals = '-1.9 1.5'
fluxes = '1.1 -0.2'
[]
[dirac3]
type = PorousFlowPolyLineSink
fluid_phase = 0
variable = massfrac_ph0_sp1
line_length = 1.3
use_enthalpy = true
mass_fraction_component = 0
point_file = one_point.bh
SumQuantityUO = dummy_outflow
p_or_t_vals = '-1.9 1.5'
fluxes = '1.1 -0.2'
[]
[dirac4]
type = PorousFlowPolyLineSink
fluid_phase = 1
variable = massfrac_ph1_sp0
function_of = temperature
line_length = 0.9
mass_fraction_component = 1
use_internal_energy = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow
p_or_t_vals = '-1.9 1.5'
fluxes = '1.1 -0.2'
[]
[dirac5]
type = PorousFlowPolyLineSink
fluid_phase = 1
variable = temp
line_length = 0.9
mass_fraction_component = 2
use_internal_energy = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow
p_or_t_vals = '-1.9 1.5'
fluxes = '1.1 -0.2'
[]
[dirac6]
type = PorousFlowPolyLineSink
fluid_phase = 1
variable = massfrac_ph0_sp0
use_mobility = true
function_of = temperature
mass_fraction_component = 1
use_relative_permeability = true
use_internal_energy = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow
p_or_t_vals = '-1.9 1.5'
fluxes = '0 -0.2'
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
file_base = line_sink02
[]
(modules/porous_flow/examples/flow_through_fractured_media/fine_transient.i)
# Using a mixed-dimensional mesh
# Transient flow and solute transport along a fracture in a porous matrix
# advective dominated flow in the fracture and diffusion into the porous matrix
#
# Note that fine_steady.i must be run to initialise the porepressure properly
[Mesh]
file = 'gold/fine_steady_out.e'
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[pp]
initial_from_file_var = pp
initial_from_file_timestep = 1
[]
[massfrac0]
[]
[]
[AuxVariables]
[velocity_x]
family = MONOMIAL
order = CONSTANT
block = fracture
[]
[velocity_y]
family = MONOMIAL
order = CONSTANT
block = fracture
[]
[]
[AuxKernels]
[velocity_x]
type = PorousFlowDarcyVelocityComponentLowerDimensional
variable = velocity_x
component = x
aperture = 6E-4
[]
[velocity_y]
type = PorousFlowDarcyVelocityComponentLowerDimensional
variable = velocity_y
component = y
aperture = 6E-4
[]
[]
[Problem]
# massfrac0 has an initial condition despite the restart
allow_initial_conditions_with_restart = true
[]
[ICs]
[massfrac0]
type = ConstantIC
variable = massfrac0
value = 0
[]
[]
[BCs]
[top]
type = DirichletBC
value = 0
variable = massfrac0
boundary = top
[]
[bottom]
type = DirichletBC
value = 1
variable = massfrac0
boundary = bottom
[]
[ptop]
type = DirichletBC
variable = pp
boundary = top
value = 1e6
[]
[pbottom]
type = DirichletBC
variable = pp
boundary = bottom
value = 1.002e6
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[adv0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
[]
[diff0]
type = PorousFlowDispersiveFlux
fluid_component = 0
variable = pp
disp_trans = 0
disp_long = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = massfrac0
[]
[adv1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = massfrac0
[]
[diff1]
type = PorousFlowDispersiveFlux
fluid_component = 1
variable = massfrac0
disp_trans = 0
disp_long = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp massfrac0'
number_fluid_phases = 1
number_fluid_components = 2
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseFullySaturated
porepressure = pp
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = massfrac0
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[poro_fracture]
type = PorousFlowPorosityConst
porosity = 6e-4 # = a * phif
block = 'fracture'
[]
[poro_matrix]
type = PorousFlowPorosityConst
porosity = 0.1
block = 'matrix1 matrix2'
[]
[diff1]
type = PorousFlowDiffusivityConst
diffusion_coeff = '1e-9 1e-9'
tortuosity = 1.0
block = 'fracture'
[]
[diff2]
type = PorousFlowDiffusivityConst
diffusion_coeff = '1e-9 1e-9'
tortuosity = 0.1
block = 'matrix1 matrix2'
[]
[relp]
type = PorousFlowRelativePermeabilityConst
phase = 0
[]
[permeability_fracture]
type = PorousFlowPermeabilityConst
permeability = '1.8e-11 0 0 0 1.8e-11 0 0 0 1.8e-11' # kf=3e-8, a=6e-4m. 1.8e-11 = kf * a
block = 'fracture'
[]
[permeability_matrix]
type = PorousFlowPermeabilityConst
permeability = '1e-20 0 0 0 1e-20 0 0 0 1e-20'
block = 'matrix1 matrix2'
[]
[]
[Functions]
[dt_controller]
type = PiecewiseConstant
x = '0 30 40 100 200 83200'
y = '0.01 0.1 1 10 100 32'
[]
[]
[Preconditioning]
active = basic
[mumps_is_best_for_parallel_jobs]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu mumps'
[]
[basic]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu NONZERO 2 '
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
end_time = 86400
[TimeStepper]
type = FunctionDT
function = dt_controller
[]
# controls for nonlinear iterations
nl_max_its = 15
nl_rel_tol = 1e-14
nl_abs_tol = 1e-9
[]
[VectorPostprocessors]
[xmass]
type = LineValueSampler
start_point = '0.4 0 0'
end_point = '0.5 0 0'
sort_by = x
num_points = 167
variable = massfrac0
[]
[]
[Outputs]
perf_graph = true
console = true
csv = true
exodus = true
[]
(modules/porous_flow/test/tests/fluidstate/brineco2_ic.i)
# Tests correct calculation of z (total mass fraction of NCG summed over all
# phases) using the PorousFlowFluidStateIC initial condition. Once z is
# calculated by the initial condition, the thermophysical properties are calculated
# and the resulting gas saturation should be equal to that given in the intial condition
[Mesh]
type = GeneratedMesh
dim = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
temperature_unit = Celsius
[]
[Variables]
[pgas]
initial_condition = 1e6
[]
[z]
[]
[]
[ICs]
[z]
type = PorousFlowFluidStateIC
saturation = 0.5
gas_porepressure = pgas
temperature = 50
variable = z
xnacl = 0.1
fluid_state = fs
[]
[]
[AuxVariables]
[saturation_gas]
order = CONSTANT
family = MONOMIAL
[]
[saturation_water]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[saturation_water]
type = PorousFlowPropertyAux
variable = saturation_water
property = saturation
phase = 0
execute_on = timestep_end
[]
[saturation_gas]
type = PorousFlowPropertyAux
variable = saturation_gas
property = saturation
phase = 1
execute_on = timestep_end
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pgas
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = z
fluid_component = 1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas z'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[fs]
type = PorousFlowBrineCO2
brine_fp = brine
co2_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[brine]
type = BrineFluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 50
[]
[waterncg]
type = PorousFlowFluidState
gas_porepressure = pgas
z = z
fluid_state = fs
capillary_pressure = pc
xnacl = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
[sg]
type = ElementIntegralVariablePostprocessor
variable = saturation_gas
execute_on = 'initial timestep_end'
[]
[sw]
type = ElementIntegralVariablePostprocessor
variable = saturation_water
execute_on = 'initial timestep_end'
[]
[z]
type = ElementIntegralVariablePostprocessor
variable = z
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
csv = true
[]
(modules/porous_flow/test/tests/newton_cooling/nc08.i)
# Newton cooling from a bar. 1-phase ideal fluid and heat, steady
[Mesh]
type = GeneratedMesh
dim = 2
nx = 100
ny = 1
xmin = 0
xmax = 100
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pressure temp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.8
alpha = 1e-5
[]
[]
[Variables]
[pressure]
[]
[temp]
[]
[]
[ICs]
# have to start these reasonably close to their steady-state values
[pressure]
type = FunctionIC
variable = pressure
function = '200-0.5*x'
[]
[temperature]
type = FunctionIC
variable = temp
function = 180+0.1*x
[]
[]
[Kernels]
[flux]
type = PorousFlowAdvectiveFlux
fluid_component = 0
gravity = '0 0 0'
variable = pressure
[]
[heat_advection]
type = PorousFlowHeatAdvection
gravity = '0 0 0'
variable = temp
[]
[]
[FluidProperties]
[idealgas]
type = IdealGasFluidProperties
molar_mass = 1.4
gamma = 1.2
mu = 1.2
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[dens0]
type = PorousFlowSingleComponentFluid
fp = idealgas
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.1 0 0 0 1.1 0 0 0 1.1'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey # irrelevant in this fully-saturated situation
n = 2
phase = 0
[]
[]
[BCs]
[leftp]
type = DirichletBC
variable = pressure
boundary = left
value = 200
[]
[leftt]
type = DirichletBC
variable = temp
boundary = left
value = 180
[]
[newtonp]
type = PorousFlowPiecewiseLinearSink
variable = pressure
boundary = right
pt_vals = '-200 0 200'
multipliers = '-200 0 200'
use_mobility = true
use_relperm = true
fluid_phase = 0
flux_function = 0.005 # 1/2/L
[]
[newtont]
type = PorousFlowPiecewiseLinearSink
variable = temp
boundary = right
pt_vals = '-200 0 200'
multipliers = '-200 0 200'
use_mobility = true
use_relperm = true
use_enthalpy = true
fluid_phase = 0
flux_function = 0.005 # 1/2/L
[]
[]
[VectorPostprocessors]
[porepressure]
type = LineValueSampler
variable = pressure
start_point = '0 0.5 0'
end_point = '100 0.5 0'
sort_by = x
num_points = 11
execute_on = timestep_end
[]
[temperature]
type = LineValueSampler
variable = temp
start_point = '0 0.5 0'
end_point = '100 0.5 0'
sort_by = x
num_points = 11
execute_on = timestep_end
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Steady
solve_type = Newton
nl_rel_tol = 1E-10
nl_abs_tol = 1E-15
[]
[Outputs]
file_base = nc08
execute_on = timestep_end
[along_line]
type = CSV
execute_vector_postprocessors_on = timestep_end
[]
[]
(modules/porous_flow/test/tests/poro_elasticity/pp_generation_unconfined_basicthm.i)
# Identical to pp_generation_unconfined_fullysat_volume.i but using an Action
#
# A sample is constrained on all sides, except its top
# and its boundaries are
# also impermeable. Fluid is pumped into the sample via a
# volumetric source (ie m^3/second per cubic meter), and the
# rise in the top surface, porepressure, and stress are observed.
#
# In the standard poromechanics scenario, the Biot Modulus is held
# fixed and the source has units 1/s. Then the expected result
# is
# strain_zz = disp_z = BiotCoefficient*BiotModulus*s*t/((bulk + 4*shear/3) + BiotCoefficient^2*BiotModulus)
# porepressure = BiotModulus*(s*t - BiotCoefficient*strain_zz)
# stress_xx = (bulk - 2*shear/3)*strain_zz (remember this is effective stress)
# stress_zz = (bulk + 4*shear/3)*strain_zz (remember this is effective stress)
#
# In standard porous_flow, everything is based on mass, eg the source has
# units kg/s/m^3. This is discussed in the other pp_generation_unconfined
# models. In this test, we use the FullySaturated Kernel and set
# multiply_by_density = false
# meaning the fluid Kernel has units of volume, and the source, s, has units 1/time
#
# The ratios are:
# stress_xx/strain_zz = (bulk - 2*shear/3) = 1 (for the parameters used here)
# stress_zz/strain_zz = (bulk + 4*shear/3) = 4 (for the parameters used here)
# porepressure/strain_zz = 13.3333333 (for the parameters used here)
#
# Expect
# disp_z = 0.3*10*s*t/((2 + 4*1.5/3) + 0.3^2*10) = 0.612245*s*t
# porepressure = 10*(s*t - 0.3*0.612245*s*t) = 8.163265*s*t
# stress_xx = (2 - 2*1.5/3)*0.612245*s*t = 0.612245*s*t
# stress_zz = (2 + 4*shear/3)*0.612245*s*t = 2.44898*s*t
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -0.5
xmax = 0.5
ymin = -0.5
ymax = 0.5
zmin = -0.5
zmax = 0.5
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[porepressure]
[]
[]
[BCs]
[confinex]
type = DirichletBC
variable = disp_x
value = 0
boundary = 'left right'
[]
[confiney]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'bottom top'
[]
[confinez]
type = DirichletBC
variable = disp_z
value = 0
boundary = 'back'
[]
[]
[Kernels]
[source]
type = BodyForce
function = 0.1
variable = porepressure
[]
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
thermal_expansion = 0.0
bulk_modulus = 3.3333333333
viscosity = 1.0
density0 = 1.0
[]
[]
[PorousFlowBasicTHM]
coupling_type = HydroMechanical
displacements = 'disp_x disp_y disp_z'
multiply_by_density = false
porepressure = porepressure
biot_coefficient = 0.3
gravity = '0 0 0'
fp = the_simple_fluid
save_component_rate_in = nodal_m3_per_s
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '1 1.5'
# bulk modulus is lambda + 2*mu/3 = 1 + 2*1.5/3 = 2
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
displacements = 'disp_x disp_y disp_z'
[]
[stress]
type = ComputeLinearElasticStress
[]
[porosity]
type = PorousFlowPorosityConst # the "const" is irrelevant here: all that uses Porosity is the BiotModulus, which just uses the initial value of porosity
porosity = 0.1
PorousFlowDictator = dictator
[]
[biot_modulus]
type = PorousFlowConstantBiotModulus
PorousFlowDictator = dictator
biot_coefficient = 0.3
fluid_bulk_modulus = 3.3333333333
solid_bulk_compliance = 0.5
[]
[permeability_irrelevant]
type = PorousFlowPermeabilityConst
PorousFlowDictator = dictator
permeability = '1.5 0 0 0 1.5 0 0 0 1.5'
[]
[]
[AuxVariables]
[nodal_m3_per_s]
[]
[]
[Postprocessors]
[nodal_m3_per_s]
type = PointValue
outputs = csv
point = '0 0 0'
variable = nodal_m3_per_s
[]
[p0]
type = PointValue
outputs = csv
point = '0 0 0'
variable = porepressure
[]
[zdisp]
type = PointValue
outputs = csv
point = '0 0 0.5'
variable = disp_z
[]
[stress_xx]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_xx
[]
[stress_yy]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_yy
[]
[stress_zz]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_zz
[]
[stress_xx_over_strain]
type = FunctionValuePostprocessor
function = stress_xx_over_strain_fcn
outputs = csv
[]
[stress_zz_over_strain]
type = FunctionValuePostprocessor
function = stress_zz_over_strain_fcn
outputs = csv
[]
[p_over_strain]
type = FunctionValuePostprocessor
function = p_over_strain_fcn
outputs = csv
[]
[]
[Functions]
[stress_xx_over_strain_fcn]
type = ParsedFunction
expression = a/b
symbol_names = 'a b'
symbol_values = 'stress_xx zdisp'
[]
[stress_zz_over_strain_fcn]
type = ParsedFunction
expression = a/b
symbol_names = 'a b'
symbol_values = 'stress_zz zdisp'
[]
[p_over_strain_fcn]
type = ParsedFunction
expression = a/b
symbol_names = 'a b'
symbol_values = 'p0 zdisp'
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-14 1E-10 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
start_time = 0
end_time = 10
dt = 1
[]
[Outputs]
execute_on = 'timestep_end'
file_base = pp_generation_unconfined_basicthm
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/thm_rehbinder/fixed_outer_rz.i)
# A version of fixed_outer.i that uses the RZ cylindrical coordinate system
[Mesh]
type = GeneratedMesh
dim = 2
nx = 40 # this is the r direction
ny = 1 # this is the height direction
xmin = 0.1
xmax = 1
bias_x = 1.1
ymin = 0.0
ymax = 1.0
coord_type = RZ
[]
[GlobalParams]
displacements = 'disp_r disp_z'
PorousFlowDictator = dictator
biot_coefficient = 1.0
[]
[Variables]
[disp_r]
[]
[disp_z]
[]
[porepressure]
[]
[temperature]
[]
[]
[BCs]
[plane_strain]
type = DirichletBC
variable = disp_z
value = 0
boundary = 'top bottom'
[]
[cavity_temperature]
type = DirichletBC
variable = temperature
value = 1000
boundary = left
[]
[cavity_porepressure]
type = DirichletBC
variable = porepressure
value = 1E6
boundary = left
[]
[cavity_zero_effective_stress_x]
type = Pressure
variable = disp_r
function = 1E6
boundary = left
use_displaced_mesh = false
[]
[outer_temperature]
type = DirichletBC
variable = temperature
value = 0
boundary = right
[]
[outer_pressure]
type = DirichletBC
variable = porepressure
value = 0
boundary = right
[]
[fixed_outer_disp]
type = DirichletBC
variable = disp_r
value = 0
boundary = right
[]
[]
[AuxVariables]
[stress_rr]
family = MONOMIAL
order = CONSTANT
[]
[stress_pp]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[stress_rr]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_rr
index_i = 0
index_j = 0
[]
[stress_pp] # hoop stress
type = RankTwoAux
rank_two_tensor = stress
variable = stress_pp
index_i = 2
index_j = 2
[]
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
thermal_expansion = 0.0
bulk_modulus = 1E12
viscosity = 1.0E-3
density0 = 1000.0
cv = 1000.0
cp = 1000.0
porepressure_coefficient = 0.0
[]
[]
[PorousFlowBasicTHM]
coupling_type = ThermoHydroMechanical
multiply_by_density = false
add_stress_aux = true
porepressure = porepressure
temperature = temperature
eigenstrain_names = thermal_contribution
gravity = '0 0 0'
fp = the_simple_fluid
[]
[Materials]
[elasticity_tensor]
type = ComputeIsotropicElasticityTensor
youngs_modulus = 1E10
poissons_ratio = 0.2
[]
[strain]
type = ComputeAxisymmetricRZSmallStrain
eigenstrain_names = thermal_contribution
[]
[thermal_contribution]
type = ComputeThermalExpansionEigenstrain
temperature = temperature
thermal_expansion_coeff = 1E-6
eigenstrain_name = thermal_contribution
stress_free_temperature = 0.0
[]
[stress]
type = ComputeLinearElasticStress
[]
[porosity]
type = PorousFlowPorosityConst # only the initial value of this is ever used
porosity = 0.1
[]
[biot_modulus]
type = PorousFlowConstantBiotModulus
solid_bulk_compliance = 1E-10
fluid_bulk_modulus = 1E12
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12' # note this is ordered: rr, zz, angle-angle
[]
[thermal_expansion]
type = PorousFlowConstantThermalExpansionCoefficient
fluid_coefficient = 1E-6
drained_coefficient = 1E-6
[]
[thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '1E6 0 0 0 1E6 0 0 0 1E6' # note this is ordered: rr, zz, angle-angle
[]
[]
[VectorPostprocessors]
[P]
type = LineValueSampler
start_point = '0.1 0 0'
end_point = '1.0 0 0'
num_points = 10
sort_by = x
variable = porepressure
[]
[T]
type = LineValueSampler
start_point = '0.1 0 0'
end_point = '1.0 0 0'
num_points = 10
sort_by = x
variable = temperature
[]
[U]
type = LineValueSampler
start_point = '0.1 0 0'
end_point = '1.0 0 0'
num_points = 10
sort_by = x
variable = disp_r
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_rtol'
petsc_options_value = 'gmres asm lu 1E-8'
[]
[]
[Executioner]
type = Steady
solve_type = Newton
[]
[Outputs]
file_base = fixed_outer_rz
execute_on = timestep_end
csv = true
[]
(modules/porous_flow/test/tests/hysteresis/except02.i)
# Exception testing of PorousFlowHysteresisOrder
# Incorrect: initial_order = 4
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[]
[PorousFlowBasicTHM]
porepressure = pp
fp = simple_fluid
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[biot_modulus]
type = PorousFlowConstantBiotModulus
biot_coefficient = 0.8
solid_bulk_compliance = 2e-7
fluid_bulk_modulus = 1e7
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-13 0 0 0 1e-13 0 0 0 1e-13'
[]
[hys_order]
type = PorousFlowHysteresisOrder
initial_order = 4
[]
[]
[Preconditioning]
[basic]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
(modules/porous_flow/test/tests/desorption/desorption02.i)
# Illustrates desorption works as planned.
#
# A mesh contains 3 elements in arranged in a line.
# The central element contains desorped fluid.
# This desorps to the nodes of that element.
#
# In the central element, of volume V, the following occurs.
# The initial porepressure=1, and concentration=1.
# The initial mass of fluid is
# V * (2 * porosity * density + (1 - porosity) * concentration)
# = V * 1.289547
# Notice the factor of "2" in the porespace contribution:
# it is because the porepressure is evaluated at nodes, so
# the nodes on the exterior of the centre_block have
# nodal-volume contributions from the elements not in centre_block.
#
# The mass-conservation equation reads
# 2 * porosity * density + (1 - porosity) * concentration = 1.289547
# and the desorption equation reads
# d( (1-porosity)C )/dt = - (1/tau)(C - dens_L * P / (P_L + P))
# where C = concentration, P = porepressure, P_L = Langmuir pressure
# dens_L = Langmuir density, tau = time constant.
# Using the mass-conservation equation in the desorption equation
# yields a nonlinear equation of P. For dt=1, and the numerical values
# given below this yields
# P = 1.83697
# and
# C = 0.676616
# The desired result is achieved by MOOSE
[Mesh]
type = FileMesh
file = three_eles.e
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[conc]
family = MONOMIAL
order = CONSTANT
block = centre_block
[]
[]
[ICs]
[p_ic]
type = ConstantIC
variable = pp
value = 1.0
[]
[conc_ic]
type = ConstantIC
variable = conc
value = 1.0
block = centre_block
[]
[]
[Kernels]
[porespace_mass_dot]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[fluid_flow]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
gravity = '0 0 0'
[]
[desorped_mass_dot]
type = PorousFlowDesorpedMassTimeDerivative
block = centre_block
conc_var = conc
variable = pp
[]
[desorped_mass_dot_conc_var]
type = PorousFlowDesorpedMassTimeDerivative
block = centre_block
conc_var = conc
variable = conc
[]
[flow_from_matrix]
type = DesorptionFromMatrix
block = centre_block
variable = conc
pressure_var = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp conc'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.5
viscosity = 1
density0 = 1
thermal_expansion = 0
[]
[]
[Materials]
[lang_stuff]
type = LangmuirMaterial
block = centre_block
one_over_adsorption_time_const = 10.0
one_over_desorption_time_const = 10.0
langmuir_density = 1
langmuir_pressure = 1
pressure_var = pp
conc_var = conc
[]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0 0 0 0 0 0 0 0 0'
[]
[relperm]
type = PorousFlowRelativePermeabilityFLAC
m = 1
phase = 0
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = true
[]
(modules/porous_flow/test/tests/poro_elasticity/pp_generation_unconfined.i)
# A sample is constrained on all sides, except its top
# and its boundaries are
# also impermeable. Fluid is pumped into the sample via a
# volumetric source (ie kg/second per cubic meter), and the
# rise in the top surface, porepressure, and stress are observed.
#
# In the standard poromechanics scenario, the Biot Modulus is held
# fixed and the source has units 1/time. Then the expected result
# is
# strain_zz = disp_z = BiotCoefficient*BiotModulus*s*t/((bulk + 4*shear/3) + BiotCoefficient^2*BiotModulus)
# porepressure = BiotModulus*(s*t - BiotCoefficient*strain_zz)
# stress_xx = (bulk - 2*shear/3)*strain_zz (remember this is effective stress)
# stress_zz = (bulk + 4*shear/3)*strain_zz (remember this is effective stress)
#
# In porous_flow, however, the source has units kg/s/m^3 and the
# Biot Modulus is not held fixed. This means that disp_z, porepressure,
# etc are not linear functions of t. Nevertheless, the ratios remain
# fixed:
# stress_xx/strain_zz = (bulk - 2*shear/3) = 1 (for the parameters used here)
# stress_zz/strain_zz = (bulk + 4*shear/3) = 4 (for the parameters used here)
# porepressure/strain_zz = 13.3333333 (for the parameters used here)
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -0.5
xmax = 0.5
ymin = -0.5
ymax = 0.5
zmin = -0.5
zmax = 0.5
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
PorousFlowDictator = dictator
block = 0
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure disp_x disp_y disp_z'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.8
alpha = 1e-5
[]
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[porepressure]
[]
[]
[BCs]
[confinex]
type = DirichletBC
variable = disp_x
value = 0
boundary = 'left right'
[]
[confiney]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'bottom top'
[]
[confinez]
type = DirichletBC
variable = disp_z
value = 0
boundary = 'back'
[]
[]
[Kernels]
[grad_stress_x]
type = StressDivergenceTensors
variable = disp_x
component = 0
[]
[grad_stress_y]
type = StressDivergenceTensors
variable = disp_y
component = 1
[]
[grad_stress_z]
type = StressDivergenceTensors
variable = disp_z
component = 2
[]
[poro_x]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
variable = disp_x
component = 0
[]
[poro_y]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
variable = disp_y
component = 1
[]
[poro_z]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
component = 2
variable = disp_z
[]
[poro_vol_exp]
type = PorousFlowMassVolumetricExpansion
variable = porepressure
fluid_component = 0
[]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = porepressure
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = porepressure
gravity = '0 0 0'
fluid_component = 0
[]
[source]
type = BodyForce
function = 0.1
variable = porepressure
[]
[]
[AuxVariables]
[stress_xx]
order = CONSTANT
family = MONOMIAL
[]
[stress_xy]
order = CONSTANT
family = MONOMIAL
[]
[stress_xz]
order = CONSTANT
family = MONOMIAL
[]
[stress_yy]
order = CONSTANT
family = MONOMIAL
[]
[stress_yz]
order = CONSTANT
family = MONOMIAL
[]
[stress_zz]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
[]
[stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
[]
[stress_xz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xz
index_i = 0
index_j = 2
[]
[stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
[]
[stress_yz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yz
index_i = 1
index_j = 2
[]
[stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 3.3333333333
density0 = 1
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '1 1.5'
# bulk modulus is lambda + 2*mu/3 = 1 + 2*1.5/3 = 2
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
displacements = 'disp_x disp_y disp_z'
[]
[stress]
type = ComputeLinearElasticStress
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = porepressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosity
fluid = true
mechanical = true
porosity_zero = 0.1
biot_coefficient = 0.3
solid_bulk = 2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 1 0 0 0 1' # unimportant
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0 # unimportant in this fully-saturated situation
phase = 0
[]
[]
[Postprocessors]
[p0]
type = PointValue
outputs = none
point = '0 0 0'
variable = porepressure
[]
[zdisp]
type = PointValue
outputs = none
point = '0 0 0.5'
variable = disp_z
[]
[stress_xx]
type = PointValue
outputs = none
point = '0 0 0'
variable = stress_xx
[]
[stress_yy]
type = PointValue
outputs = none
point = '0 0 0'
variable = stress_yy
[]
[stress_zz]
type = PointValue
outputs = none
point = '0 0 0'
variable = stress_zz
[]
[stress_xx_over_strain]
type = FunctionValuePostprocessor
function = stress_xx_over_strain_fcn
outputs = csv
[]
[stress_zz_over_strain]
type = FunctionValuePostprocessor
function = stress_zz_over_strain_fcn
outputs = csv
[]
[p_over_strain]
type = FunctionValuePostprocessor
function = p_over_strain_fcn
outputs = csv
[]
[]
[Functions]
[stress_xx_over_strain_fcn]
type = ParsedFunction
expression = a/b
symbol_names = 'a b'
symbol_values = 'stress_xx zdisp'
[]
[stress_zz_over_strain_fcn]
type = ParsedFunction
expression = a/b
symbol_names = 'a b'
symbol_values = 'stress_zz zdisp'
[]
[p_over_strain_fcn]
type = ParsedFunction
expression = a/b
symbol_names = 'a b'
symbol_values = 'p0 zdisp'
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-14 1E-10 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
start_time = 0
end_time = 10
dt = 1
[]
[Outputs]
execute_on = 'timestep_end'
file_base = pp_generation_unconfined
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phasePSVG2.i)
# Pressure pulse in 1D with 2 phases, 2components - transient
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[ppwater]
initial_condition = 2e6
[]
[sgas]
initial_condition = 0.3
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[ppgas]
family = MONOMIAL
order = FIRST
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
variable = ppwater
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
variable = sgas
fluid_component = 1
[]
[]
[AuxKernels]
[ppgas]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = ppgas
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater sgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-4
sat_lr = 0.3
pc_max = 1e9
log_extension = true
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 2e7
density0 = 1
thermal_expansion = 0
viscosity = 1e-5
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = ppwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-15 0 0 0 1e-15 0 0 0 1e-15'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 1
[]
[]
[BCs]
[leftwater]
type = DirichletBC
boundary = left
value = 3e6
variable = ppwater
[]
[rightwater]
type = DirichletBC
boundary = right
value = 2e6
variable = ppwater
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-20 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1e3
end_time = 1e4
[]
[VectorPostprocessors]
[pp]
type = LineValueSampler
warn_discontinuous_face_values = false
sort_by = x
variable = 'ppwater ppgas'
start_point = '0 0 0'
end_point = '100 0 0'
num_points = 11
[]
[]
[Outputs]
file_base = pressure_pulse_1d_2phasePSVG2
print_linear_residuals = false
[csv]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/test/tests/jacobian/brineco2_gas.i)
# Tests correct calculation of properties derivatives in PorousFlowFluidState
# for conditions that give a single gas phase
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[AuxVariables]
[xnacl]
initial_condition = 0.05
[]
[]
[Variables]
[pgas]
[]
[zi]
[]
[]
[ICs]
[pgas]
type = RandomIC
min = 5e4
max = 1e5
variable = pgas
[]
[z]
type = RandomIC
min = 0.9
max = 0.99
variable = zi
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pgas
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = zi
fluid_component = 1
[]
[adv0]
type = PorousFlowAdvectiveFlux
variable = pgas
fluid_component = 0
[]
[adv1]
type = PorousFlowAdvectiveFlux
variable = zi
fluid_component = 1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas zi'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
pc_max = 1e3
[]
[fs]
type = PorousFlowBrineCO2
brine_fp = brine
co2_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[brine]
type = BrineFluidProperties
[]
[water]
type = Water97FluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 50
[]
[brineco2]
type = PorousFlowFluidState
gas_porepressure = pgas
z = zi
temperature_unit = Celsius
xnacl = xnacl
capillary_pressure = pc
fluid_state = fs
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[AuxVariables]
[sgas]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[sgas]
type = PorousFlowPropertyAux
property = saturation
phase = 1
variable = sgas
[]
[]
[Postprocessors]
[sgas_min]
type = ElementExtremeValue
variable = sgas
value_type = min
[]
[sgas_max]
type = ElementExtremeValue
variable = sgas
value_type = max
[]
[]
(modules/porous_flow/test/tests/jacobian/fflux12.i)
# 1phase, 3components, constant viscosity, constant insitu permeability
# density with constant bulk, FLAC relative perm with a cubic, nonzero gravity, unsaturated with VG
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[massfrac0]
[]
[massfrac1]
[]
[]
[ICs]
[pp]
type = RandomIC
variable = pp
min = -1.0
max = 0.0
[]
[massfrac0]
type = RandomIC
variable = massfrac0
min = 0
max = 0.3
[]
[massfrac1]
type = RandomIC
variable = massfrac1
min = 0
max = 0.4
[]
[]
[Kernels]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
gravity = '-1 -0.1 0'
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = massfrac0
gravity = '-1 -0.1 0'
[]
[flux2]
type = PorousFlowAdvectiveFlux
fluid_component = 2
variable = massfrac1
gravity = '-1 -0.1 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp massfrac0 massfrac1'
number_fluid_phases = 1
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.6
alpha = 1 # small so that most effective saturations are close to 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac0 massfrac1'
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = PorousFlowRelativePermeabilityFLAC
m = 10
phase = 0
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/poro_elasticity/terzaghi_basicthm.i)
# Using a BasicTHM action
# Terzaghi's problem of consolodation of a drained medium
# The FullySaturated Kernels are used, with multiply_by_density = false
# so that this becomes a linear problem with constant Biot Modulus
#
# A saturated soil sample sits in a bath of water.
# It is constrained on its sides, and bottom.
# Its sides and bottom are also impermeable.
# Initially it is unstressed.
# A normal stress, q, is applied to the soil's top.
# The soil then slowly compresses as water is squeezed
# out from the sample from its top (the top BC for
# the porepressure is porepressure = 0).
#
# See, for example. Section 2.2 of the online manuscript
# Arnold Verruijt "Theory and Problems of Poroelasticity" Delft University of Technology 2013
# but note that the "sigma" in that paper is the negative
# of the stress in TensorMechanics
#
# Here are the problem's parameters, and their values:
# Soil height. h = 10
# Soil's Lame lambda. la = 2
# Soil's Lame mu, which is also the Soil's shear modulus. mu = 3
# Soil bulk modulus. K = la + 2*mu/3 = 4
# Soil confined compressibility. m = 1/(K + 4mu/3) = 0.125
# Soil bulk compliance. 1/K = 0.25
# Fluid bulk modulus. Kf = 8
# Fluid bulk compliance. 1/Kf = 0.125
# Fluid mobility (soil permeability/fluid viscosity). k = 1.5
# Soil initial porosity. phi0 = 0.1
# Biot coefficient. alpha = 0.6
# Soil initial storativity, which is the reciprocal of the initial Biot modulus. S = phi0/Kf + (alpha - phi0)(1 - alpha)/K = 0.0625
# Consolidation coefficient. c = k/(S + alpha^2 m) = 13.95348837
# Normal stress on top. q = 1
# Initial porepressure, resulting from instantaneous application of q, assuming corresponding instantaneous increase of porepressure (Note that this is calculated by MOOSE: we only need it for the analytical solution). p0 = alpha*m*q/(S + alpha^2 m) = 0.69767442
# Initial vertical displacement (down is positive), resulting from instantaneous application of q (Note this is calculated by MOOSE: we only need it for the analytical solution). uz0 = q*m*h*S/(S + alpha^2 m)
# Final vertical displacement (down in positive) (Note this is calculated by MOOSE: we only need it for the analytical solution). uzinf = q*m*h
#
# The solution for porepressure is
# P = 4*p0/\pi \sum_{k=1}^{\infty} \frac{(-1)^{k-1}}{2k-1} \cos ((2k-1)\pi z/(2h)) \exp(-(2k-1)^2 \pi^2 ct/(4 h^2))
# This series converges very slowly for ct/h^2 small, so in that domain
# P = p0 erf( (1-(z/h))/(2 \sqrt(ct/h^2)) )
#
# The degree of consolidation is defined as
# U = (uz - uz0)/(uzinf - uz0)
# where uz0 and uzinf are defined above, and
# uz = the vertical displacement of the top (down is positive)
# U = 1 - (8/\pi^2)\sum_{k=1}^{\infty} \frac{1}{(2k-1)^2} \exp(-(2k-1)^2 \pi^2 ct/(4 h^2))
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 10
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = 0
zmax = 10
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
PorousFlowDictator = dictator
block = 0
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[porepressure]
[]
[]
[BCs]
[confinex]
type = DirichletBC
variable = disp_x
value = 0
boundary = 'left right'
[]
[confiney]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'bottom top'
[]
[basefixed]
type = DirichletBC
variable = disp_z
value = 0
boundary = back
[]
[topdrained]
type = DirichletBC
variable = porepressure
value = 0
boundary = front
[]
[topload]
type = NeumannBC
variable = disp_z
value = -1
boundary = front
[]
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
thermal_expansion = 0.0
bulk_modulus = 8.0
viscosity = 0.96
density0 = 1.0
[]
[]
[PorousFlowBasicTHM]
coupling_type = HydroMechanical
displacements = 'disp_x disp_y disp_z'
multiply_by_density = false
porepressure = porepressure
biot_coefficient = 0.6
gravity = '0 0 0'
fp = the_simple_fluid
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '2 3'
# bulk modulus is lambda + 2*mu/3 = 2 + 2*3/3 = 4
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[porosity]
type = PorousFlowPorosityConst # only the initial value of this is used
porosity = 0.1
[]
[biot_modulus]
type = PorousFlowConstantBiotModulus
biot_coefficient = 0.6
fluid_bulk_modulus = 8
solid_bulk_compliance = 0.25
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.5 0 0 0 1.5 0 0 0 1.5'
[]
[]
[Postprocessors]
[p0]
type = PointValue
outputs = csv
point = '0 0 0'
variable = porepressure
use_displaced_mesh = false
[]
[p1]
type = PointValue
outputs = csv
point = '0 0 1'
variable = porepressure
use_displaced_mesh = false
[]
[p2]
type = PointValue
outputs = csv
point = '0 0 2'
variable = porepressure
use_displaced_mesh = false
[]
[p3]
type = PointValue
outputs = csv
point = '0 0 3'
variable = porepressure
use_displaced_mesh = false
[]
[p4]
type = PointValue
outputs = csv
point = '0 0 4'
variable = porepressure
use_displaced_mesh = false
[]
[p5]
type = PointValue
outputs = csv
point = '0 0 5'
variable = porepressure
use_displaced_mesh = false
[]
[p6]
type = PointValue
outputs = csv
point = '0 0 6'
variable = porepressure
use_displaced_mesh = false
[]
[p7]
type = PointValue
outputs = csv
point = '0 0 7'
variable = porepressure
use_displaced_mesh = false
[]
[p8]
type = PointValue
outputs = csv
point = '0 0 8'
variable = porepressure
use_displaced_mesh = false
[]
[p9]
type = PointValue
outputs = csv
point = '0 0 9'
variable = porepressure
use_displaced_mesh = false
[]
[p99]
type = PointValue
outputs = csv
point = '0 0 10'
variable = porepressure
use_displaced_mesh = false
[]
[zdisp]
type = PointValue
outputs = csv
point = '0 0 10'
variable = disp_z
use_displaced_mesh = false
[]
[dt]
type = FunctionValuePostprocessor
outputs = console
function = if(0.5*t<0.1,0.5*t,0.1)
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
start_time = 0
end_time = 10
[TimeStepper]
type = PostprocessorDT
postprocessor = dt
dt = 0.0001
[]
[]
[Outputs]
execute_on = 'timestep_end'
file_base = terzaghi_basicthm
[csv]
type = CSV
[]
[]
(modules/porous_flow/examples/flow_through_fractured_media/coarse.i)
# Flow and solute transport along a fracture embedded in a porous matrix
# The fracture is represented by lower dimensional elements
# fracture aperture = 6e-4m
# fracture porosity = 6e-4m = phi * a
# fracture permeability = 1.8e-11 which is based on k=3e-8 from a**2/12, and k*a = 3e-8*6e-4
# matrix porosity = 0.1
# matrix permeanility = 1e-20
[Mesh]
type = FileMesh
file = 'coarse.e'
block_id = '1 2 3'
block_name = 'fracture matrix1 matrix2'
boundary_id = '1 2'
boundary_name = 'bottom top'
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[pp]
[]
[massfrac0]
[]
[]
[AuxVariables]
[velocity_x]
family = MONOMIAL
order = CONSTANT
block = 'fracture'
[]
[velocity_y]
family = MONOMIAL
order = CONSTANT
block = 'fracture'
[]
[]
[AuxKernels]
[velocity_x]
type = PorousFlowDarcyVelocityComponentLowerDimensional
variable = velocity_x
component = x
aperture = 6E-4
[]
[velocity_y]
type = PorousFlowDarcyVelocityComponentLowerDimensional
variable = velocity_y
component = y
aperture = 6E-4
[]
[]
[ICs]
[massfrac0]
type = ConstantIC
variable = massfrac0
value = 0
[]
[pp_matrix]
type = ConstantIC
variable = pp
value = 1E6
[]
[]
[BCs]
[top]
type = DirichletBC
value = 0
variable = massfrac0
boundary = top
[]
[bottom]
type = DirichletBC
value = 1
variable = massfrac0
boundary = bottom
[]
[ptop]
type = DirichletBC
variable = pp
boundary = top
value = 1e6
[]
[pbottom]
type = DirichletBC
variable = pp
boundary = bottom
value = 1.002e6
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = pp
[]
[adv0]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = pp
[]
[diff0]
type = PorousFlowDispersiveFlux
fluid_component = 1
variable = pp
disp_trans = 0
disp_long = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = massfrac0
[]
[adv1]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = massfrac0
[]
[diff1]
type = PorousFlowDispersiveFlux
fluid_component = 0
variable = massfrac0
disp_trans = 0
disp_long = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp massfrac0'
number_fluid_phases = 1
number_fluid_components = 2
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseFullySaturated
porepressure = pp
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = massfrac0
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[poro_fracture]
type = PorousFlowPorosityConst
porosity = 6e-4 # = a * phif
block = 'fracture'
[]
[poro_matrix]
type = PorousFlowPorosityConst
porosity = 0.1
block = 'matrix1 matrix2'
[]
[diff1]
type = PorousFlowDiffusivityConst
diffusion_coeff = '1e-9 1e-9'
tortuosity = 1.0
block = 'fracture'
[]
[diff2]
type = PorousFlowDiffusivityConst
diffusion_coeff = '1e-9 1e-9'
tortuosity = 0.1
block = 'matrix1 matrix2'
[]
[permeability_fracture]
type = PorousFlowPermeabilityConst
permeability = '1.8e-11 0 0 0 1.8e-11 0 0 0 1.8e-11' # 1.8e-11 = a * kf
block = 'fracture'
[]
[permeability_matrix]
type = PorousFlowPermeabilityConst
permeability = '1e-20 0 0 0 1e-20 0 0 0 1e-20'
block = 'matrix1 matrix2'
[]
[relp]
type = PorousFlowRelativePermeabilityConst
phase = 0
[]
[]
[Preconditioning]
[basic]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
end_time = 10
dt = 1
# controls for nonlinear iterations
nl_max_its = 15
nl_rel_tol = 1e-14
nl_abs_tol = 1e-12
[]
[VectorPostprocessors]
[xmass]
type = LineValueSampler
start_point = '-0.5 0 0'
end_point = '0.5 0 0'
sort_by = x
num_points = 41
variable = massfrac0
outputs = csv
[]
[]
[Outputs]
[csv]
type = CSV
execute_on = 'final'
[]
[]
(modules/porous_flow/test/tests/jacobian/disp02.i)
# Test the Jacobian of the dispersive contribution to the diffusive component of
# the PorousFlowDisperiveFlux kernel along with a non-zero diffusion.
# By setting disp_long and disp_trans to the same non-zero value, the purely
# dispersive component of the flux is zero, and the only flux is due to diffusion
# and its contribution from disp_trans.
[Mesh]
type = GeneratedMesh
dim = 2
nx = 3
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[massfrac0]
[]
[]
[ICs]
[pp]
type = RandomIC
variable = pp
max = 2e1
min = 1e1
[]
[massfrac0]
type = RandomIC
variable = massfrac0
min = 0
max = 1
[]
[]
[Kernels]
[diff0]
type = PorousFlowDispersiveFlux
fluid_component = 0
variable = pp
gravity = '1 0 0'
disp_long = 0.1
disp_trans = 0.1
[]
[diff1]
type = PorousFlowDispersiveFlux
fluid_component = 1
variable = massfrac0
gravity = '1 0 0'
disp_long = 0.1
disp_trans = 0.1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp massfrac0'
number_fluid_phases = 1
number_fluid_components = 2
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1e7
density0 = 10
thermal_expansion = 0
viscosity = 1
[]
[]
[Materials]
[temp]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseFullySaturated
porepressure = pp
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac0'
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[poro]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[diff]
type = PorousFlowDiffusivityConst
diffusion_coeff = '1e-2 1e-1'
tortuosity = '0.1'
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = PorousFlowRelativePermeabilityConst
phase = 0
[]
[]
[Preconditioning]
active = smp
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/heat_advection/heat_advection_1d_fully_saturated.i)
# 1phase, heat advecting with a moving fluid
# Using the FullySaturated Kernel
[Mesh]
type = GeneratedMesh
dim = 1
nx = 50
xmin = 0
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[temp]
initial_condition = 200
[]
[pp]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = '1-x'
[]
[]
[BCs]
[pp0]
type = DirichletBC
variable = pp
boundary = left
value = 1
[]
[pp1]
type = DirichletBC
variable = pp
boundary = right
value = 0
[]
[spit_heat]
type = DirichletBC
variable = temp
boundary = left
value = 300
[]
[suck_heat]
type = DirichletBC
variable = temp
boundary = right
value = 200
[]
[]
[Kernels]
[mass_dot]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[advection]
type = PorousFlowFullySaturatedDarcyBase
variable = pp
[]
[energy_dot]
type = PorousFlowEnergyTimeDerivative
variable = temp
[]
[convection]
type = PorousFlowFullySaturatedHeatAdvection
variable = temp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 100
density0 = 1000
viscosity = 4.4
thermal_expansion = 0
cv = 2
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1.0
density = 125
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.1 0 0 0 2 0 0 0 3'
[]
[massfrac]
type = PorousFlowMassFraction
[]
[PS]
type = PorousFlow1PhaseFullySaturated
porepressure = pp
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres bjacobi 1E-15 1E-10 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 0.01
end_time = 0.6
[]
[VectorPostprocessors]
[T]
type = LineValueSampler
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 51
sort_by = x
variable = temp
[]
[]
[Outputs]
file_base = heat_advection_1d_fully_saturated
[csv]
type = CSV
sync_times = '0.1 0.6'
sync_only = true
[]
[]
(modules/combined/examples/geochem-porous_flow/geotes_weber_tensleep/porous_flow.i)
#########################################
# #
# File written by create_input_files.py #
# #
#########################################
# PorousFlow simulation of injection and production in a simplified GeoTES aquifer
# Much of this file is standard porous-flow stuff. The unusual aspects are:
# - transfer of the rates of changes of each species (kg.s) to the aquifer_geochemistry.i simulation. This is achieved by saving these changes from the PorousFlowMassTimeDerivative residuals
# - transfer of the temperature field to the aquifer_geochemistry.i simulation
# Interesting behaviour can be simulated by this file without its 'parent' simulation, exchanger.i. exchanger.i provides mass-fractions injected via the injection_rate_massfrac_* variables, but since these are more-or-less constant throughout the duration of the exchanger.i simulation, the initial_conditions specified below may be used. Similar, exchanger.i provides injection_temperature, but that is also constant.
injection_rate = -0.02 # kg/s/m, negative because injection as a source
production_rate = 0.02 # kg/s/m, this is about the maximum that can be sustained by the aquifer, with its fairly low permeability, without porepressure becoming negative
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 3
xmin = -75
xmax = 75
ymin = 0
ymax = 40
zmin = -25
zmax = 25
nx = 15
ny = 4
nz = 5
[]
[aquifer]
type = ParsedSubdomainMeshGenerator
input = gen
block_id = 1
block_name = aquifer
combinatorial_geometry = 'z >= -5 & z <= 5'
[]
[injection_nodes]
input = aquifer
type = ExtraNodesetGenerator
new_boundary = injection_nodes
coord = '-25 0 -5; -25 0 5'
[]
[production_nodes]
input = injection_nodes
type = ExtraNodesetGenerator
new_boundary = production_nodes
coord = '25 0 -5; 25 0 5'
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 -10'
[]
[BCs]
[injection_temperature]
type = MatchedValueBC
variable = temperature
v = injection_temperature
boundary = injection_nodes
[]
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
thermal_expansion = 0
bulk_modulus = 2E9
viscosity = 1E-3
density0 = 1000
cv = 4000.0
cp = 4000.0
[]
[]
[PorousFlowFullySaturated]
coupling_type = ThermoHydro
porepressure = porepressure
temperature = temperature
mass_fraction_vars = 'f_H f_Cl f_SO4 f_HCO3 f_SiO2aq f_Al f_Ca f_Mg f_Fe f_K f_Na f_Sr f_F f_BOH f_Br f_Ba f_Li f_NO3 f_O2aq '
save_component_rate_in = 'rate_H rate_Cl rate_SO4 rate_HCO3 rate_SiO2aq rate_Al rate_Ca rate_Mg rate_Fe rate_K rate_Na rate_Sr rate_F rate_BOH rate_Br rate_Ba rate_Li rate_NO3 rate_O2aq rate_H2O' # change in kg at every node / dt
fp = the_simple_fluid
temperature_unit = Celsius
[]
[Materials]
[porosity_caps]
type = PorousFlowPorosityConst # this simulation has no porosity changes from dissolution
block = 0
porosity = 0.01
[]
[porosity_aquifer]
type = PorousFlowPorosityConst # this simulation has no porosity changes from dissolution
block = aquifer
porosity = 0.063
[]
[permeability_caps]
type = PorousFlowPermeabilityConst
block = 0
permeability = '1E-18 0 0 0 1E-18 0 0 0 1E-18'
[]
[permeability_aquifer]
type = PorousFlowPermeabilityConst
block = aquifer
permeability = '1.7E-15 0 0 0 1.7E-15 0 0 0 4.1E-16'
[]
[thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '0 0 0 0 0 0 0 0 0'
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
density = 2500.0
specific_heat_capacity = 1200.0
[]
[]
[Preconditioning]
active = typically_efficient
[typically_efficient]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = ' hypre boomeramg'
[]
[strong]
type = SMP
full = true
petsc_options = '-ksp_diagonal_scale -ksp_diagonal_scale_fix'
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = ' asm ilu NONZERO 2'
[]
[probably_too_strong]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu mumps'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 7.76E6 # 90 days
[TimeStepper]
type = FunctionDT
function = 'min(3E4, max(1E4, 0.2 * t))'
[]
[]
[Outputs]
exodus = true
[]
[Variables]
[f_H]
initial_condition = -2.952985071156e-06
[]
[f_Cl]
initial_condition = 0.04870664551708
[]
[f_SO4]
initial_condition = 0.0060359986852517
[]
[f_HCO3]
initial_condition = 5.0897287594019e-05
[]
[f_SiO2aq]
initial_condition = 3.0246609868421e-05
[]
[f_Al]
initial_condition = 3.268028901929e-08
[]
[f_Ca]
initial_condition = 0.00082159428184586
[]
[f_Mg]
initial_condition = 1.8546347062146e-05
[]
[f_Fe]
initial_condition = 4.3291908204093e-05
[]
[f_K]
initial_condition = 6.8434768308898e-05
[]
[f_Na]
initial_condition = 0.033298053919671
[]
[f_Sr]
initial_condition = 1.2771866652177e-05
[]
[f_F]
initial_condition = 5.5648860174073e-06
[]
[f_BOH]
initial_condition = 0.0003758574621917
[]
[f_Br]
initial_condition = 9.0315286107068e-05
[]
[f_Ba]
initial_condition = 1.5637460875161e-07
[]
[f_Li]
initial_condition = 8.3017067912701e-05
[]
[f_NO3]
initial_condition = 0.00010958455036169
[]
[f_O2aq]
initial_condition = -7.0806852373351e-05
[]
[porepressure]
initial_condition = 30E6
[]
[temperature]
initial_condition = 92
scaling = 1E-6 # fluid enthalpy is roughly 1E6
[]
[]
[DiracKernels]
[inject_H]
type = PorousFlowPolyLineSink
SumQuantityUO = injected_mass
fluxes = ${injection_rate}
p_or_t_vals = 0.0
multiplying_var = injection_rate_massfrac_H
point_file = injection.bh
variable = f_H
[]
[inject_Cl]
type = PorousFlowPolyLineSink
SumQuantityUO = injected_mass
fluxes = ${injection_rate}
p_or_t_vals = 0.0
multiplying_var = injection_rate_massfrac_Cl
point_file = injection.bh
variable = f_Cl
[]
[inject_SO4]
type = PorousFlowPolyLineSink
SumQuantityUO = injected_mass
fluxes = ${injection_rate}
p_or_t_vals = 0.0
multiplying_var = injection_rate_massfrac_SO4
point_file = injection.bh
variable = f_SO4
[]
[inject_HCO3]
type = PorousFlowPolyLineSink
SumQuantityUO = injected_mass
fluxes = ${injection_rate}
p_or_t_vals = 0.0
multiplying_var = injection_rate_massfrac_HCO3
point_file = injection.bh
variable = f_HCO3
[]
[inject_SiO2aq]
type = PorousFlowPolyLineSink
SumQuantityUO = injected_mass
fluxes = ${injection_rate}
p_or_t_vals = 0.0
multiplying_var = injection_rate_massfrac_SiO2aq
point_file = injection.bh
variable = f_SiO2aq
[]
[inject_Al]
type = PorousFlowPolyLineSink
SumQuantityUO = injected_mass
fluxes = ${injection_rate}
p_or_t_vals = 0.0
multiplying_var = injection_rate_massfrac_Al
point_file = injection.bh
variable = f_Al
[]
[inject_Ca]
type = PorousFlowPolyLineSink
SumQuantityUO = injected_mass
fluxes = ${injection_rate}
p_or_t_vals = 0.0
multiplying_var = injection_rate_massfrac_Ca
point_file = injection.bh
variable = f_Ca
[]
[inject_Mg]
type = PorousFlowPolyLineSink
SumQuantityUO = injected_mass
fluxes = ${injection_rate}
p_or_t_vals = 0.0
multiplying_var = injection_rate_massfrac_Mg
point_file = injection.bh
variable = f_Mg
[]
[inject_Fe]
type = PorousFlowPolyLineSink
SumQuantityUO = injected_mass
fluxes = ${injection_rate}
p_or_t_vals = 0.0
multiplying_var = injection_rate_massfrac_Fe
point_file = injection.bh
variable = f_Fe
[]
[inject_K]
type = PorousFlowPolyLineSink
SumQuantityUO = injected_mass
fluxes = ${injection_rate}
p_or_t_vals = 0.0
multiplying_var = injection_rate_massfrac_K
point_file = injection.bh
variable = f_K
[]
[inject_Na]
type = PorousFlowPolyLineSink
SumQuantityUO = injected_mass
fluxes = ${injection_rate}
p_or_t_vals = 0.0
multiplying_var = injection_rate_massfrac_Na
point_file = injection.bh
variable = f_Na
[]
[inject_Sr]
type = PorousFlowPolyLineSink
SumQuantityUO = injected_mass
fluxes = ${injection_rate}
p_or_t_vals = 0.0
multiplying_var = injection_rate_massfrac_Sr
point_file = injection.bh
variable = f_Sr
[]
[inject_F]
type = PorousFlowPolyLineSink
SumQuantityUO = injected_mass
fluxes = ${injection_rate}
p_or_t_vals = 0.0
multiplying_var = injection_rate_massfrac_F
point_file = injection.bh
variable = f_F
[]
[inject_BOH]
type = PorousFlowPolyLineSink
SumQuantityUO = injected_mass
fluxes = ${injection_rate}
p_or_t_vals = 0.0
multiplying_var = injection_rate_massfrac_BOH
point_file = injection.bh
variable = f_BOH
[]
[inject_Br]
type = PorousFlowPolyLineSink
SumQuantityUO = injected_mass
fluxes = ${injection_rate}
p_or_t_vals = 0.0
multiplying_var = injection_rate_massfrac_Br
point_file = injection.bh
variable = f_Br
[]
[inject_Ba]
type = PorousFlowPolyLineSink
SumQuantityUO = injected_mass
fluxes = ${injection_rate}
p_or_t_vals = 0.0
multiplying_var = injection_rate_massfrac_Ba
point_file = injection.bh
variable = f_Ba
[]
[inject_Li]
type = PorousFlowPolyLineSink
SumQuantityUO = injected_mass
fluxes = ${injection_rate}
p_or_t_vals = 0.0
multiplying_var = injection_rate_massfrac_Li
point_file = injection.bh
variable = f_Li
[]
[inject_NO3]
type = PorousFlowPolyLineSink
SumQuantityUO = injected_mass
fluxes = ${injection_rate}
p_or_t_vals = 0.0
multiplying_var = injection_rate_massfrac_NO3
point_file = injection.bh
variable = f_NO3
[]
[inject_O2aq]
type = PorousFlowPolyLineSink
SumQuantityUO = injected_mass
fluxes = ${injection_rate}
p_or_t_vals = 0.0
multiplying_var = injection_rate_massfrac_O2aq
point_file = injection.bh
variable = f_O2aq
[]
[inject_H2O]
type = PorousFlowPolyLineSink
SumQuantityUO = injected_mass
fluxes = ${injection_rate}
p_or_t_vals = 0.0
multiplying_var = injection_rate_massfrac_H2O
point_file = injection.bh
variable = porepressure
[]
[produce_H]
type = PorousFlowPolyLineSink
SumQuantityUO = produced_mass_H
fluxes = ${production_rate}
p_or_t_vals = 0.0
mass_fraction_component = 0
point_file = production.bh
variable = f_H
[]
[produce_Cl]
type = PorousFlowPolyLineSink
SumQuantityUO = produced_mass_Cl
fluxes = ${production_rate}
p_or_t_vals = 0.0
mass_fraction_component = 1
point_file = production.bh
variable = f_Cl
[]
[produce_SO4]
type = PorousFlowPolyLineSink
SumQuantityUO = produced_mass_SO4
fluxes = ${production_rate}
p_or_t_vals = 0.0
mass_fraction_component = 2
point_file = production.bh
variable = f_SO4
[]
[produce_HCO3]
type = PorousFlowPolyLineSink
SumQuantityUO = produced_mass_HCO3
fluxes = ${production_rate}
p_or_t_vals = 0.0
mass_fraction_component = 3
point_file = production.bh
variable = f_HCO3
[]
[produce_SiO2aq]
type = PorousFlowPolyLineSink
SumQuantityUO = produced_mass_SiO2aq
fluxes = ${production_rate}
p_or_t_vals = 0.0
mass_fraction_component = 4
point_file = production.bh
variable = f_SiO2aq
[]
[produce_Al]
type = PorousFlowPolyLineSink
SumQuantityUO = produced_mass_Al
fluxes = ${production_rate}
p_or_t_vals = 0.0
mass_fraction_component = 5
point_file = production.bh
variable = f_Al
[]
[produce_Ca]
type = PorousFlowPolyLineSink
SumQuantityUO = produced_mass_Ca
fluxes = ${production_rate}
p_or_t_vals = 0.0
mass_fraction_component = 6
point_file = production.bh
variable = f_Ca
[]
[produce_Mg]
type = PorousFlowPolyLineSink
SumQuantityUO = produced_mass_Mg
fluxes = ${production_rate}
p_or_t_vals = 0.0
mass_fraction_component = 7
point_file = production.bh
variable = f_Mg
[]
[produce_Fe]
type = PorousFlowPolyLineSink
SumQuantityUO = produced_mass_Fe
fluxes = ${production_rate}
p_or_t_vals = 0.0
mass_fraction_component = 8
point_file = production.bh
variable = f_Fe
[]
[produce_K]
type = PorousFlowPolyLineSink
SumQuantityUO = produced_mass_K
fluxes = ${production_rate}
p_or_t_vals = 0.0
mass_fraction_component = 9
point_file = production.bh
variable = f_K
[]
[produce_Na]
type = PorousFlowPolyLineSink
SumQuantityUO = produced_mass_Na
fluxes = ${production_rate}
p_or_t_vals = 0.0
mass_fraction_component = 10
point_file = production.bh
variable = f_Na
[]
[produce_Sr]
type = PorousFlowPolyLineSink
SumQuantityUO = produced_mass_Sr
fluxes = ${production_rate}
p_or_t_vals = 0.0
mass_fraction_component = 11
point_file = production.bh
variable = f_Sr
[]
[produce_F]
type = PorousFlowPolyLineSink
SumQuantityUO = produced_mass_F
fluxes = ${production_rate}
p_or_t_vals = 0.0
mass_fraction_component = 12
point_file = production.bh
variable = f_F
[]
[produce_BOH]
type = PorousFlowPolyLineSink
SumQuantityUO = produced_mass_BOH
fluxes = ${production_rate}
p_or_t_vals = 0.0
mass_fraction_component = 13
point_file = production.bh
variable = f_BOH
[]
[produce_Br]
type = PorousFlowPolyLineSink
SumQuantityUO = produced_mass_Br
fluxes = ${production_rate}
p_or_t_vals = 0.0
mass_fraction_component = 14
point_file = production.bh
variable = f_Br
[]
[produce_Ba]
type = PorousFlowPolyLineSink
SumQuantityUO = produced_mass_Ba
fluxes = ${production_rate}
p_or_t_vals = 0.0
mass_fraction_component = 15
point_file = production.bh
variable = f_Ba
[]
[produce_Li]
type = PorousFlowPolyLineSink
SumQuantityUO = produced_mass_Li
fluxes = ${production_rate}
p_or_t_vals = 0.0
mass_fraction_component = 16
point_file = production.bh
variable = f_Li
[]
[produce_NO3]
type = PorousFlowPolyLineSink
SumQuantityUO = produced_mass_NO3
fluxes = ${production_rate}
p_or_t_vals = 0.0
mass_fraction_component = 17
point_file = production.bh
variable = f_NO3
[]
[produce_O2aq]
type = PorousFlowPolyLineSink
SumQuantityUO = produced_mass_O2aq
fluxes = ${production_rate}
p_or_t_vals = 0.0
mass_fraction_component = 18
point_file = production.bh
variable = f_O2aq
[]
[produce_H2O]
type = PorousFlowPolyLineSink
SumQuantityUO = produced_mass_H2O
fluxes = ${production_rate}
p_or_t_vals = 0.0
mass_fraction_component = 19
point_file = production.bh
variable = porepressure
[]
[produce_heat]
type = PorousFlowPolyLineSink
SumQuantityUO = produced_heat
fluxes = ${production_rate}
p_or_t_vals = 0.0
use_enthalpy = true
point_file = production.bh
variable = temperature
[]
[]
[UserObjects]
[injected_mass]
type = PorousFlowSumQuantity
[]
[produced_mass_H]
type = PorousFlowSumQuantity
[]
[produced_mass_Cl]
type = PorousFlowSumQuantity
[]
[produced_mass_SO4]
type = PorousFlowSumQuantity
[]
[produced_mass_HCO3]
type = PorousFlowSumQuantity
[]
[produced_mass_SiO2aq]
type = PorousFlowSumQuantity
[]
[produced_mass_Al]
type = PorousFlowSumQuantity
[]
[produced_mass_Ca]
type = PorousFlowSumQuantity
[]
[produced_mass_Mg]
type = PorousFlowSumQuantity
[]
[produced_mass_Fe]
type = PorousFlowSumQuantity
[]
[produced_mass_K]
type = PorousFlowSumQuantity
[]
[produced_mass_Na]
type = PorousFlowSumQuantity
[]
[produced_mass_Sr]
type = PorousFlowSumQuantity
[]
[produced_mass_F]
type = PorousFlowSumQuantity
[]
[produced_mass_BOH]
type = PorousFlowSumQuantity
[]
[produced_mass_Br]
type = PorousFlowSumQuantity
[]
[produced_mass_Ba]
type = PorousFlowSumQuantity
[]
[produced_mass_Li]
type = PorousFlowSumQuantity
[]
[produced_mass_NO3]
type = PorousFlowSumQuantity
[]
[produced_mass_O2aq]
type = PorousFlowSumQuantity
[]
[produced_mass_H2O]
type = PorousFlowSumQuantity
[]
[produced_heat]
type = PorousFlowSumQuantity
[]
[]
[Postprocessors]
[dt]
type = TimestepSize
execute_on = TIMESTEP_BEGIN
[]
[tot_kg_injected_this_timestep]
type = PorousFlowPlotQuantity
uo = injected_mass
[]
[kg_H_produced_this_timestep]
type = PorousFlowPlotQuantity
uo = produced_mass_H
[]
[kg_Cl_produced_this_timestep]
type = PorousFlowPlotQuantity
uo = produced_mass_Cl
[]
[kg_SO4_produced_this_timestep]
type = PorousFlowPlotQuantity
uo = produced_mass_SO4
[]
[kg_HCO3_produced_this_timestep]
type = PorousFlowPlotQuantity
uo = produced_mass_HCO3
[]
[kg_SiO2aq_produced_this_timestep]
type = PorousFlowPlotQuantity
uo = produced_mass_SiO2aq
[]
[kg_Al_produced_this_timestep]
type = PorousFlowPlotQuantity
uo = produced_mass_Al
[]
[kg_Ca_produced_this_timestep]
type = PorousFlowPlotQuantity
uo = produced_mass_Ca
[]
[kg_Mg_produced_this_timestep]
type = PorousFlowPlotQuantity
uo = produced_mass_Mg
[]
[kg_Fe_produced_this_timestep]
type = PorousFlowPlotQuantity
uo = produced_mass_Fe
[]
[kg_K_produced_this_timestep]
type = PorousFlowPlotQuantity
uo = produced_mass_K
[]
[kg_Na_produced_this_timestep]
type = PorousFlowPlotQuantity
uo = produced_mass_Na
[]
[kg_Sr_produced_this_timestep]
type = PorousFlowPlotQuantity
uo = produced_mass_Sr
[]
[kg_F_produced_this_timestep]
type = PorousFlowPlotQuantity
uo = produced_mass_F
[]
[kg_BOH_produced_this_timestep]
type = PorousFlowPlotQuantity
uo = produced_mass_BOH
[]
[kg_Br_produced_this_timestep]
type = PorousFlowPlotQuantity
uo = produced_mass_Br
[]
[kg_Ba_produced_this_timestep]
type = PorousFlowPlotQuantity
uo = produced_mass_Ba
[]
[kg_Li_produced_this_timestep]
type = PorousFlowPlotQuantity
uo = produced_mass_Li
[]
[kg_NO3_produced_this_timestep]
type = PorousFlowPlotQuantity
uo = produced_mass_NO3
[]
[kg_O2aq_produced_this_timestep]
type = PorousFlowPlotQuantity
uo = produced_mass_O2aq
[]
[kg_H2O_produced_this_timestep]
type = PorousFlowPlotQuantity
uo = produced_mass_H2O
[]
[mole_rate_H_produced]
type = FunctionValuePostprocessor
function = moles_H
indirect_dependencies = 'kg_H_produced_this_timestep dt'
[]
[mole_rate_Cl_produced]
type = FunctionValuePostprocessor
function = moles_Cl
indirect_dependencies = 'kg_Cl_produced_this_timestep dt'
[]
[mole_rate_SO4_produced]
type = FunctionValuePostprocessor
function = moles_SO4
indirect_dependencies = 'kg_SO4_produced_this_timestep dt'
[]
[mole_rate_HCO3_produced]
type = FunctionValuePostprocessor
function = moles_HCO3
indirect_dependencies = 'kg_HCO3_produced_this_timestep dt'
[]
[mole_rate_SiO2aq_produced]
type = FunctionValuePostprocessor
function = moles_SiO2aq
indirect_dependencies = 'kg_SiO2aq_produced_this_timestep dt'
[]
[mole_rate_Al_produced]
type = FunctionValuePostprocessor
function = moles_Al
indirect_dependencies = 'kg_Al_produced_this_timestep dt'
[]
[mole_rate_Ca_produced]
type = FunctionValuePostprocessor
function = moles_Ca
indirect_dependencies = 'kg_Ca_produced_this_timestep dt'
[]
[mole_rate_Mg_produced]
type = FunctionValuePostprocessor
function = moles_Mg
indirect_dependencies = 'kg_Mg_produced_this_timestep dt'
[]
[mole_rate_Fe_produced]
type = FunctionValuePostprocessor
function = moles_Fe
indirect_dependencies = 'kg_Fe_produced_this_timestep dt'
[]
[mole_rate_K_produced]
type = FunctionValuePostprocessor
function = moles_K
indirect_dependencies = 'kg_K_produced_this_timestep dt'
[]
[mole_rate_Na_produced]
type = FunctionValuePostprocessor
function = moles_Na
indirect_dependencies = 'kg_Na_produced_this_timestep dt'
[]
[mole_rate_Sr_produced]
type = FunctionValuePostprocessor
function = moles_Sr
indirect_dependencies = 'kg_Sr_produced_this_timestep dt'
[]
[mole_rate_F_produced]
type = FunctionValuePostprocessor
function = moles_F
indirect_dependencies = 'kg_F_produced_this_timestep dt'
[]
[mole_rate_BOH_produced]
type = FunctionValuePostprocessor
function = moles_BOH
indirect_dependencies = 'kg_BOH_produced_this_timestep dt'
[]
[mole_rate_Br_produced]
type = FunctionValuePostprocessor
function = moles_Br
indirect_dependencies = 'kg_Br_produced_this_timestep dt'
[]
[mole_rate_Ba_produced]
type = FunctionValuePostprocessor
function = moles_Ba
indirect_dependencies = 'kg_Ba_produced_this_timestep dt'
[]
[mole_rate_Li_produced]
type = FunctionValuePostprocessor
function = moles_Li
indirect_dependencies = 'kg_Li_produced_this_timestep dt'
[]
[mole_rate_NO3_produced]
type = FunctionValuePostprocessor
function = moles_NO3
indirect_dependencies = 'kg_NO3_produced_this_timestep dt'
[]
[mole_rate_O2aq_produced]
type = FunctionValuePostprocessor
function = moles_O2aq
indirect_dependencies = 'kg_O2aq_produced_this_timestep dt'
[]
[mole_rate_H2O_produced]
type = FunctionValuePostprocessor
function = moles_H2O
indirect_dependencies = 'kg_H2O_produced_this_timestep dt'
[]
[heat_joules_extracted_this_timestep]
type = PorousFlowPlotQuantity
uo = produced_heat
[]
[production_temperature]
type = AverageNodalVariableValue
boundary = production_nodes
variable = temperature
[]
[]
[Functions]
[moles_H]
type = ParsedFunction
symbol_names = 'kg_H dt'
symbol_values = 'kg_H_produced_this_timestep dt'
expression = 'kg_H * 1000 / 1.0079 / dt'
[]
[moles_Cl]
type = ParsedFunction
symbol_names = 'kg_Cl dt'
symbol_values = 'kg_Cl_produced_this_timestep dt'
expression = 'kg_Cl * 1000 / 35.453 / dt'
[]
[moles_SO4]
type = ParsedFunction
symbol_names = 'kg_SO4 dt'
symbol_values = 'kg_SO4_produced_this_timestep dt'
expression = 'kg_SO4 * 1000 / 96.0576 / dt'
[]
[moles_HCO3]
type = ParsedFunction
symbol_names = 'kg_HCO3 dt'
symbol_values = 'kg_HCO3_produced_this_timestep dt'
expression = 'kg_HCO3 * 1000 / 61.0171 / dt'
[]
[moles_SiO2aq]
type = ParsedFunction
symbol_names = 'kg_SiO2aq dt'
symbol_values = 'kg_SiO2aq_produced_this_timestep dt'
expression = 'kg_SiO2aq * 1000 / 60.0843 / dt'
[]
[moles_Al]
type = ParsedFunction
symbol_names = 'kg_Al dt'
symbol_values = 'kg_Al_produced_this_timestep dt'
expression = 'kg_Al * 1000 / 26.9815 / dt'
[]
[moles_Ca]
type = ParsedFunction
symbol_names = 'kg_Ca dt'
symbol_values = 'kg_Ca_produced_this_timestep dt'
expression = 'kg_Ca * 1000 / 40.08 / dt'
[]
[moles_Mg]
type = ParsedFunction
symbol_names = 'kg_Mg dt'
symbol_values = 'kg_Mg_produced_this_timestep dt'
expression = 'kg_Mg * 1000 / 24.305 / dt'
[]
[moles_Fe]
type = ParsedFunction
symbol_names = 'kg_Fe dt'
symbol_values = 'kg_Fe_produced_this_timestep dt'
expression = 'kg_Fe * 1000 / 55.847 / dt'
[]
[moles_K]
type = ParsedFunction
symbol_names = 'kg_K dt'
symbol_values = 'kg_K_produced_this_timestep dt'
expression = 'kg_K * 1000 / 39.0983 / dt'
[]
[moles_Na]
type = ParsedFunction
symbol_names = 'kg_Na dt'
symbol_values = 'kg_Na_produced_this_timestep dt'
expression = 'kg_Na * 1000 / 22.9898 / dt'
[]
[moles_Sr]
type = ParsedFunction
symbol_names = 'kg_Sr dt'
symbol_values = 'kg_Sr_produced_this_timestep dt'
expression = 'kg_Sr * 1000 / 87.62 / dt'
[]
[moles_F]
type = ParsedFunction
symbol_names = 'kg_F dt'
symbol_values = 'kg_F_produced_this_timestep dt'
expression = 'kg_F * 1000 / 18.9984 / dt'
[]
[moles_BOH]
type = ParsedFunction
symbol_names = 'kg_BOH dt'
symbol_values = 'kg_BOH_produced_this_timestep dt'
expression = 'kg_BOH * 1000 / 61.8329 / dt'
[]
[moles_Br]
type = ParsedFunction
symbol_names = 'kg_Br dt'
symbol_values = 'kg_Br_produced_this_timestep dt'
expression = 'kg_Br * 1000 / 79.904 / dt'
[]
[moles_Ba]
type = ParsedFunction
symbol_names = 'kg_Ba dt'
symbol_values = 'kg_Ba_produced_this_timestep dt'
expression = 'kg_Ba * 1000 / 137.33 / dt'
[]
[moles_Li]
type = ParsedFunction
symbol_names = 'kg_Li dt'
symbol_values = 'kg_Li_produced_this_timestep dt'
expression = 'kg_Li * 1000 / 6.941 / dt'
[]
[moles_NO3]
type = ParsedFunction
symbol_names = 'kg_NO3 dt'
symbol_values = 'kg_NO3_produced_this_timestep dt'
expression = 'kg_NO3 * 1000 / 62.0049 / dt'
[]
[moles_O2aq]
type = ParsedFunction
symbol_names = 'kg_O2aq dt'
symbol_values = 'kg_O2aq_produced_this_timestep dt'
expression = 'kg_O2aq * 1000 / 31.9988 / dt'
[]
[moles_H2O]
type = ParsedFunction
symbol_names = 'kg_H2O dt'
symbol_values = 'kg_H2O_produced_this_timestep dt'
expression = 'kg_H2O * 1000 / 18.01801802 / dt'
[]
[]
[AuxVariables]
[injection_temperature]
initial_condition = 92
[]
[injection_rate_massfrac_H]
initial_condition = -2.952985071156e-06
[]
[injection_rate_massfrac_Cl]
initial_condition = 0.04870664551708
[]
[injection_rate_massfrac_SO4]
initial_condition = 0.0060359986852517
[]
[injection_rate_massfrac_HCO3]
initial_condition = 5.0897287594019e-05
[]
[injection_rate_massfrac_SiO2aq]
initial_condition = 3.0246609868421e-05
[]
[injection_rate_massfrac_Al]
initial_condition = 3.268028901929e-08
[]
[injection_rate_massfrac_Ca]
initial_condition = 0.00082159428184586
[]
[injection_rate_massfrac_Mg]
initial_condition = 1.8546347062146e-05
[]
[injection_rate_massfrac_Fe]
initial_condition = 4.3291908204093e-05
[]
[injection_rate_massfrac_K]
initial_condition = 6.8434768308898e-05
[]
[injection_rate_massfrac_Na]
initial_condition = 0.033298053919671
[]
[injection_rate_massfrac_Sr]
initial_condition = 1.2771866652177e-05
[]
[injection_rate_massfrac_F]
initial_condition = 5.5648860174073e-06
[]
[injection_rate_massfrac_BOH]
initial_condition = 0.0003758574621917
[]
[injection_rate_massfrac_Br]
initial_condition = 9.0315286107068e-05
[]
[injection_rate_massfrac_Ba]
initial_condition = 1.5637460875161e-07
[]
[injection_rate_massfrac_Li]
initial_condition = 8.3017067912701e-05
[]
[injection_rate_massfrac_NO3]
initial_condition = 0.00010958455036169
[]
[injection_rate_massfrac_O2aq]
initial_condition = -7.0806852373351e-05
[]
[injection_rate_massfrac_H2O]
initial_condition = 0.91032275033842
[]
[rate_H]
[]
[rate_Cl]
[]
[rate_SO4]
[]
[rate_HCO3]
[]
[rate_SiO2aq]
[]
[rate_Al]
[]
[rate_Ca]
[]
[rate_Mg]
[]
[rate_Fe]
[]
[rate_K]
[]
[rate_Na]
[]
[rate_Sr]
[]
[rate_F]
[]
[rate_BOH]
[]
[rate_Br]
[]
[rate_Ba]
[]
[rate_Li]
[]
[rate_NO3]
[]
[rate_O2aq]
[]
[rate_H2O]
[]
[]
[MultiApps]
[react]
type = TransientMultiApp
input_files = aquifer_geochemistry.i
clone_master_mesh = true
execute_on = 'timestep_end'
[]
[]
[Transfers]
[changes_due_to_flow]
type = MultiAppCopyTransfer
source_variable = 'rate_H rate_Cl rate_SO4 rate_HCO3 rate_SiO2aq rate_Al rate_Ca rate_Mg rate_Fe rate_K rate_Na rate_Sr rate_F rate_BOH rate_Br rate_Ba rate_Li rate_NO3 rate_O2aq rate_H2O temperature'
variable = 'pf_rate_H pf_rate_Cl pf_rate_SO4 pf_rate_HCO3 pf_rate_SiO2aq pf_rate_Al pf_rate_Ca pf_rate_Mg pf_rate_Fe pf_rate_K pf_rate_Na pf_rate_Sr pf_rate_F pf_rate_BOH pf_rate_Br pf_rate_Ba pf_rate_Li pf_rate_NO3 pf_rate_O2aq pf_rate_H2O temperature'
to_multi_app = react
[]
[massfrac_from_geochem]
type = MultiAppCopyTransfer
source_variable = 'massfrac_H massfrac_Cl massfrac_SO4 massfrac_HCO3 massfrac_SiO2aq massfrac_Al massfrac_Ca massfrac_Mg massfrac_Fe massfrac_K massfrac_Na massfrac_Sr massfrac_F massfrac_BOH massfrac_Br massfrac_Ba massfrac_Li massfrac_NO3 massfrac_O2aq '
variable = 'f_H f_Cl f_SO4 f_HCO3 f_SiO2aq f_Al f_Ca f_Mg f_Fe f_K f_Na f_Sr f_F f_BOH f_Br f_Ba f_Li f_NO3 f_O2aq '
from_multi_app = react
[]
[]
(modules/porous_flow/test/tests/hysteresis/hys_order_09.i)
# Test that PorousFlowHysteresisOrder correctly calculates hysteresis order
# Hysteresis order is initialised = 3, with turning points = (0.5, 0.8, 0.66)
# Initial saturation is 0.71
# A large amount of water is removed in one timestep so the saturation becomes 0.58 (and order = 0)
# Then, water is added to the system (order = 1, with turning point = 0.58) until saturation = 0.67
# Then, water is removed from the system so order becomes 2 with turning point = 0.67
# Then, water is removed from the system until saturation < 0.58 and order = 0
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = -9E5
[]
[]
[PorousFlowUnsaturated]
porepressure = pp
fp = simple_fluid
[]
[DiracKernels]
[source_sink_0]
type = PorousFlowPointSourceFromPostprocessor
point = '0 0 0'
mass_flux = sink_strength
variable = pp
[]
[source_sink_1]
type = PorousFlowPointSourceFromPostprocessor
point = '1 0 0'
mass_flux = sink_strength
variable = pp
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosityConst
porosity = 1.0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0 0 0 0 0 0 0 0 0'
[]
[hys_order]
type = PorousFlowHysteresisOrder
initial_order = 3
previous_turning_points = '0.6 0.8 0.66'
[]
[]
[AuxVariables]
[hys_order]
family = MONOMIAL
order = CONSTANT
[]
[tp0]
family = MONOMIAL
order = CONSTANT
[]
[tp1]
family = MONOMIAL
order = CONSTANT
[]
[tp2]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[hys_order]
type = PorousFlowPropertyAux
variable = hys_order
property = hysteresis_order
[]
[tp0]
type = PorousFlowPropertyAux
variable = tp0
property = hysteresis_saturation_turning_point
hysteresis_turning_point = 0
[]
[tp1]
type = PorousFlowPropertyAux
variable = tp1
property = hysteresis_saturation_turning_point
hysteresis_turning_point = 1
[]
[tp2]
type = PorousFlowPropertyAux
variable = tp2
property = hysteresis_saturation_turning_point
hysteresis_turning_point = 2
[]
[]
[Functions]
[sink_strength_fcn]
type = ParsedFunction
expression = '30 * if(t <= 1, -2, if(t <= 2, 1.5, -1))'
[]
[]
[Postprocessors]
[sink_strength]
type = FunctionValuePostprocessor
function = sink_strength_fcn
outputs = 'none'
[]
[saturation]
type = PointValue
point = '0 0 0'
variable = saturation0
[]
[hys_order]
type = PointValue
point = '0 0 0'
variable = hys_order
[]
[tp0]
type = PointValue
point = '0 0 0'
variable = tp0
[]
[tp1]
type = PointValue
point = '0 0 0'
variable = tp1
[]
[tp2]
type = PointValue
point = '0 0 0'
variable = tp2
[]
[]
[Preconditioning]
[basic]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 6
nl_abs_tol = 1E-7
[]
[Outputs]
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/poro_elasticity/mandel.i)
# Mandel's problem of consolodation of a drained medium
#
# A sample is in plane strain.
# -a <= x <= a
# -b <= y <= b
# It is squashed with constant force by impermeable, frictionless plattens on its top and bottom surfaces (at y=+/-b)
# Fluid is allowed to leak out from its sides (at x=+/-a)
# The porepressure within the sample is monitored.
#
# As is common in the literature, this is simulated by
# considering the quarter-sample, 0<=x<=a and 0<=y<=b, with
# impermeable, roller BCs at x=0 and y=0 and y=b.
# Porepressure is fixed at zero on x=a.
# Porepressure and displacement are initialised to zero.
# Then the top (y=b) is moved downwards with prescribed velocity,
# so that the total force that is inducing this downwards velocity
# is fixed. The velocity is worked out by solving Mandel's problem
# analytically, and the total force is monitored in the simulation
# to check that it indeed remains constant.
#
# Here are the problem's parameters, and their values:
# Soil width. a = 1
# Soil height. b = 0.1
# Soil's Lame lambda. la = 0.5
# Soil's Lame mu, which is also the Soil's shear modulus. mu = G = 0.75
# Soil bulk modulus. K = la + 2*mu/3 = 1
# Drained Poisson ratio. nu = (3K - 2G)/(6K + 2G) = 0.2
# Soil bulk compliance. 1/K = 1
# Fluid bulk modulus. Kf = 8
# Fluid bulk compliance. 1/Kf = 0.125
# Soil initial porosity. phi0 = 0.1
# Biot coefficient. alpha = 0.6
# Biot modulus. M = 1/(phi0/Kf + (alpha - phi0)(1 - alpha)/K) = 4.705882
# Undrained bulk modulus. Ku = K + alpha^2*M = 2.694118
# Undrained Poisson ratio. nuu = (3Ku - 2G)/(6Ku + 2G) = 0.372627
# Skempton coefficient. B = alpha*M/Ku = 1.048035
# Fluid mobility (soil permeability/fluid viscosity). k = 1.5
# Consolidation coefficient. c = 2*k*B^2*G*(1-nu)*(1+nuu)^2/9/(1-nuu)/(nuu-nu) = 3.821656
# Normal stress on top. F = 1
#
# The solution for porepressure and displacements is given in
# AHD Cheng and E Detournay "A direct boundary element method for plane strain poroelasticity" International Journal of Numerical and Analytical Methods in Geomechanics 12 (1988) 551-572.
# The solution involves complicated infinite series, so I shall not write it here
#
# FINAL NOTE: The above solution assumes constant Biot Modulus.
# In porous_flow this is not true. Therefore the solution is
# a little different than in the paper. This test was therefore
# validated against MOOSE's poromechanics, which can choose either
# a constant Biot Modulus (which has been shown to agree with
# the analytic solution), or a non-constant Biot Modulus (which
# gives the same results as porous_flow).
[Mesh]
type = GeneratedMesh
dim = 3
nx = 10
ny = 1
nz = 1
xmin = 0
xmax = 1
ymin = 0
ymax = 0.1
zmin = 0
zmax = 1
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
PorousFlowDictator = dictator
block = 0
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure disp_x disp_y disp_z'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.8
alpha = 1e-5
[]
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[porepressure]
[]
[]
[BCs]
[roller_xmin]
type = DirichletBC
variable = disp_x
value = 0
boundary = 'left'
[]
[roller_ymin]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'bottom'
[]
[plane_strain]
type = DirichletBC
variable = disp_z
value = 0
boundary = 'back front'
[]
[xmax_drained]
type = DirichletBC
variable = porepressure
value = 0
boundary = right
[]
[top_velocity]
type = FunctionDirichletBC
variable = disp_y
function = top_velocity
boundary = top
[]
[]
[Functions]
[top_velocity]
type = PiecewiseLinear
x = '0 0.002 0.006 0.014 0.03 0.046 0.062 0.078 0.094 0.11 0.126 0.142 0.158 0.174 0.19 0.206 0.222 0.238 0.254 0.27 0.286 0.302 0.318 0.334 0.35 0.366 0.382 0.398 0.414 0.43 0.446 0.462 0.478 0.494 0.51 0.526 0.542 0.558 0.574 0.59 0.606 0.622 0.638 0.654 0.67 0.686 0.702'
y = '-0.041824842 -0.042730269 -0.043412712 -0.04428867 -0.045509181 -0.04645965 -0.047268246 -0.047974749 -0.048597109 -0.0491467 -0.049632388 -0.050061697 -0.050441198 -0.050776675 -0.051073238 -0.0513354 -0.051567152 -0.051772022 -0.051953128 -0.052113227 -0.052254754 -0.052379865 -0.052490464 -0.052588233 -0.052674662 -0.052751065 -0.052818606 -0.052878312 -0.052931093 -0.052977751 -0.053018997 -0.053055459 -0.053087691 -0.053116185 -0.053141373 -0.05316364 -0.053183324 -0.053200724 -0.053216106 -0.053229704 -0.053241725 -0.053252351 -0.053261745 -0.053270049 -0.053277389 -0.053283879 -0.053289615'
[]
[]
[AuxVariables]
[stress_yy]
order = CONSTANT
family = MONOMIAL
[]
[tot_force]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
[]
[tot_force]
type = ParsedAux
coupled_variables = 'stress_yy porepressure'
execute_on = timestep_end
variable = tot_force
expression = '-stress_yy+0.6*porepressure'
[]
[]
[Kernels]
[grad_stress_x]
type = StressDivergenceTensors
variable = disp_x
component = 0
[]
[grad_stress_y]
type = StressDivergenceTensors
variable = disp_y
component = 1
[]
[grad_stress_z]
type = StressDivergenceTensors
variable = disp_z
component = 2
[]
[poro_x]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.6
variable = disp_x
component = 0
[]
[poro_y]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.6
variable = disp_y
component = 1
[]
[poro_z]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.6
component = 2
variable = disp_z
[]
[poro_vol_exp]
type = PorousFlowMassVolumetricExpansion
variable = porepressure
fluid_component = 0
[]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = porepressure
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = porepressure
gravity = '0 0 0'
fluid_component = 0
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 8
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '0.5 0.75'
# bulk modulus is lambda + 2*mu/3 = 0.5 + 2*0.75/3 = 1
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = porepressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosity
fluid = true
mechanical = true
ensure_positive = false
porosity_zero = 0.1
biot_coefficient = 0.6
solid_bulk = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.5 0 0 0 1.5 0 0 0 1.5'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0 # unimportant in this fully-saturated situation
phase = 0
[]
[]
[Postprocessors]
[p0]
type = PointValue
outputs = csv
point = '0.0 0 0'
variable = porepressure
[]
[p1]
type = PointValue
outputs = csv
point = '0.1 0 0'
variable = porepressure
[]
[p2]
type = PointValue
outputs = csv
point = '0.2 0 0'
variable = porepressure
[]
[p3]
type = PointValue
outputs = csv
point = '0.3 0 0'
variable = porepressure
[]
[p4]
type = PointValue
outputs = csv
point = '0.4 0 0'
variable = porepressure
[]
[p5]
type = PointValue
outputs = csv
point = '0.5 0 0'
variable = porepressure
[]
[p6]
type = PointValue
outputs = csv
point = '0.6 0 0'
variable = porepressure
[]
[p7]
type = PointValue
outputs = csv
point = '0.7 0 0'
variable = porepressure
[]
[p8]
type = PointValue
outputs = csv
point = '0.8 0 0'
variable = porepressure
[]
[p9]
type = PointValue
outputs = csv
point = '0.9 0 0'
variable = porepressure
[]
[p99]
type = PointValue
outputs = csv
point = '1 0 0'
variable = porepressure
[]
[xdisp]
type = PointValue
outputs = csv
point = '1 0.1 0'
variable = disp_x
[]
[ydisp]
type = PointValue
outputs = csv
point = '1 0.1 0'
variable = disp_y
[]
[total_downwards_force]
type = ElementAverageValue
outputs = csv
variable = tot_force
[]
[dt]
type = FunctionValuePostprocessor
outputs = console
function = if(0.15*t<0.01,0.15*t,0.01)
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu 1E-14 1E-10 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
start_time = 0
end_time = 0.7
[TimeStepper]
type = PostprocessorDT
postprocessor = dt
dt = 0.001
[]
[]
[Outputs]
execute_on = 'timestep_end'
file_base = mandel
[csv]
time_step_interval = 3
type = CSV
[]
[]
(modules/porous_flow/test/tests/actions/fullsat_brine_except1.i)
# Check error when using PorousFlowFullySaturated action,
# attempting to create a Brine material without any mass
# fraction variables.
[Mesh]
type = GeneratedMesh
dim = 1
nx = 1
[]
[GlobalParams]
block = '0'
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[PorousFlowFullySaturated]
coupling_type = ThermoHydro
porepressure = pp
temperature = temp
fluid_properties_type = PorousFlowBrine
dictator_name = dictator
[]
[Variables]
[pp]
initial_condition = 20E6
[]
[temp]
initial_condition = 323.15
[]
[nacl]
initial_condition = 0.1047
[]
[]
[Kernels]
# All provided by PorousFlowFullySaturated action
[]
[BCs]
[t_bdy]
type = DirichletBC
variable = temp
boundary = 'left right'
value = 323.15
[]
[p_bdy]
type = DirichletBC
variable = pp
boundary = 'left right'
value = 20E6
[]
[nacl_bdy]
type = DirichletBC
variable = nacl
boundary = 'left right'
value = 0.1047
[]
[]
[Materials]
# Thermal conductivity
[thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '3 0 0 0 3 0 0 0 3'
wet_thermal_conductivity = '3 0 0 0 3 0 0 0 3'
[]
# Specific heat capacity
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 850
density = 2700
[]
# Permeability
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-13 0 0 0 1E-13 0 0 0 1E-13'
[]
# Porosity
[porosity]
type = PorousFlowPorosityConst
porosity = 0.3
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
file_base = fullsat_brine_except1
[]
(modules/porous_flow/test/tests/fluidstate/coldwater_injection_radial.i)
# Cold water injection into 1D radial hot reservoir (Avdonin, 1964)
#
# To generate results presented in documentation for this problem,
# set xmax = 1000 and nx = 200 in the Mesh block, and dtmax = 1e4
# and end_time = 1e6 in the Executioner block.
[Mesh]
type = GeneratedMesh
dim = 1
nx = 50
xmin = 0.1
xmax = 5
bias_x = 1.05
rz_coord_axis = Y
coord_type = RZ
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[AuxVariables]
[temperature]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[temperature]
type = PorousFlowPropertyAux
variable = temperature
property = temperature
execute_on = 'initial timestep_end'
[]
[]
[Variables]
[pliquid]
initial_condition = 5e6
[]
[h]
scaling = 1e-6
[]
[]
[ICs]
[hic]
type = PorousFlowFluidPropertyIC
variable = h
porepressure = pliquid
property = enthalpy
temperature = 170
temperature_unit = Celsius
fp = water
[]
[]
[Functions]
[injection_rate]
type = ParsedFunction
symbol_values = injection_area
symbol_names = area
expression = '-0.1/area'
[]
[]
[BCs]
[source]
type = PorousFlowSink
variable = pliquid
flux_function = injection_rate
boundary = left
[]
[pright]
type = DirichletBC
variable = pliquid
value = 5e6
boundary = right
[]
[hleft]
type = DirichletBC
variable = h
value = 678.52e3
boundary = left
[]
[hright]
type = DirichletBC
variable = h
value = 721.4e3
boundary = right
[]
[]
[Kernels]
[mass]
type = PorousFlowMassTimeDerivative
variable = pliquid
[]
[massflux]
type = PorousFlowAdvectiveFlux
variable = pliquid
[]
[heat]
type = PorousFlowEnergyTimeDerivative
variable = h
[]
[heatflux]
type = PorousFlowHeatAdvection
variable = h
[]
[heatcond]
type = PorousFlowHeatConduction
variable = h
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pliquid h'
number_fluid_phases = 2
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
pc_max = 1e6
sat_lr = 0.1
m = 0.5
alpha = 1e-5
[]
[fs]
type = PorousFlowWaterVapor
water_fp = water
capillary_pressure = pc
[]
[]
[FluidProperties]
[water]
type = Water97FluidProperties
[]
[]
[Materials]
[watervapor]
type = PorousFlowFluidStateSingleComponent
porepressure = pliquid
enthalpy = h
temperature_unit = Celsius
capillary_pressure = pc
fluid_state = fs
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.8e-11 0 0 0 1.8e-11 0 0 0 1.8e-11'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.1
sum_s_res = 0.1
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
sum_s_res = 0.1
[]
[internal_energy]
type = PorousFlowMatrixInternalEnergy
density = 2900
specific_heat_capacity = 740
[]
[rock_thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '20 0 0 0 20 0 0 0 20'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
end_time = 1e3
nl_abs_tol = 1e-8
[TimeStepper]
type = IterationAdaptiveDT
dt = 100
[]
[]
[Postprocessors]
[injection_area]
type = AreaPostprocessor
boundary = left
execute_on = initial
[]
[]
[VectorPostprocessors]
[line]
type = ElementValueSampler
sort_by = x
variable = temperature
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
perf_graph = true
[csv]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/examples/solute_tracer_transport/solute_tracer_transport.i)
# Longitudinal dispersivity
disp = 0.7
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 1
nx = 100
xmin = 0
xmax = 100
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[porepressure]
initial_condition = 1e5
[]
[C]
initial_condition = 0
[]
[]
[AuxVariables]
[Darcy_vel_x]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[Darcy_vel_x]
type = PorousFlowDarcyVelocityComponent
variable = Darcy_vel_x
component = x
fluid_phase = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure C'
number_fluid_phases = 1
number_fluid_components = 2
[]
[]
[Kernels]
[mass_der_water]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = porepressure
[]
[adv_pp]
type = PorousFlowFullySaturatedDarcyFlow
variable = porepressure
fluid_component = 1
[]
[diff_pp]
type = PorousFlowDispersiveFlux
fluid_component = 1
variable = porepressure
disp_trans = 0
disp_long = ${disp}
[]
[mass_der_C]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = C
[]
[adv_C]
type = PorousFlowFullySaturatedDarcyFlow
fluid_component = 0
variable = C
[]
[diff_C]
type = PorousFlowDispersiveFlux
fluid_component = 0
variable = C
disp_trans = 0
disp_long = ${disp}
[]
[]
[FluidProperties]
[water]
type = Water97FluidProperties
[]
[]
[Materials]
[ps]
type = PorousFlow1PhaseFullySaturated
porepressure = porepressure
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.25
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-11 0 0 0 1E-11 0 0 0 1E-11'
[]
[water]
type = PorousFlowSingleComponentFluid
fp = water
phase = 0
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = C
[]
[temperature]
type = PorousFlowTemperature
temperature = 293
[]
[diff]
type = PorousFlowDiffusivityConst
diffusion_coeff = '0 0'
tortuosity = 0.1
[]
[relperm]
type = PorousFlowRelativePermeabilityConst
kr = 1
phase = 0
[]
[]
[BCs]
[constant_inlet_pressure]
type = DirichletBC
variable = porepressure
value = 1.2e5
boundary = left
[]
[constant_outlet_porepressure]
type = DirichletBC
variable = porepressure
value = 1e5
boundary = right
[]
[inlet_tracer]
type = DirichletBC
variable = C
value = 0.001
boundary = left
[]
[outlet_tracer]
type = PorousFlowOutflowBC
variable = C
boundary = right
mass_fraction_component = 0
[]
[]
[Preconditioning]
[basic]
type = SMP
full = true
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = ' asm lu NONZERO 2'
[]
[]
[Executioner]
type = Transient
end_time = 17280000
dtmax = 86400
nl_rel_tol = 1e-6
nl_abs_tol = 1e-12
[TimeStepper]
type = IterationAdaptiveDT
dt = 1000
[]
[]
[Postprocessors]
[C]
type = PointValue
variable = C
point = '50 0 0'
[]
[Darcy_x]
type = PointValue
variable = Darcy_vel_x
point = '50 0 0'
[]
[]
[Outputs]
file_base = solute_tracer_transport_${disp}
csv = true
[]
(modules/porous_flow/test/tests/dirackernels/bh_except13.i)
# PorousFlowPeacemanBorehole exception test
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = TimeDerivative
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
bottom_p_or_t = 0
fluid_phase = 0
point_file = coincident_points.bh
SumQuantityUO = borehole_total_outflow_mass
variable = pp
unit_weight = '0 0 0'
character = 1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
expression = abs((a-c+d)/2/(a+c))
symbol_names = 'a c d'
symbol_values = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
(modules/porous_flow/test/tests/fluidstate/theis_brineco2_nonisothermal.i)
# Two phase nonisothermal Theis problem: Flow from single source.
# Constant rate injection 2 kg/s of cold CO2 into warm reservoir
# 1D cylindrical mesh
# Initially, system has only a liquid phase, until enough gas is injected
# to form a gas phase, in which case the system becomes two phase.
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
nx = 40
xmin = 0.1
xmax = 200
bias_x = 1.05
[]
coord_type = RZ
rz_coord_axis = Y
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[AuxVariables]
[saturation_gas]
order = CONSTANT
family = MONOMIAL
[]
[x1]
order = CONSTANT
family = MONOMIAL
[]
[y0]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[saturation_gas]
type = PorousFlowPropertyAux
variable = saturation_gas
property = saturation
phase = 1
execute_on = timestep_end
[]
[x1]
type = PorousFlowPropertyAux
variable = x1
property = mass_fraction
phase = 0
fluid_component = 1
execute_on = timestep_end
[]
[y0]
type = PorousFlowPropertyAux
variable = y0
property = mass_fraction
phase = 1
fluid_component = 0
execute_on = timestep_end
[]
[]
[Variables]
[pgas]
initial_condition = 20e6
[]
[zi]
initial_condition = 0
[]
[xnacl]
initial_condition = 0.1
[]
[temperature]
initial_condition = 70
scaling = 1e-4
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pgas
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pgas
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = zi
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = zi
[]
[mass2]
type = PorousFlowMassTimeDerivative
fluid_component = 2
variable = xnacl
[]
[flux2]
type = PorousFlowAdvectiveFlux
fluid_component = 2
variable = xnacl
[]
[energy]
type = PorousFlowEnergyTimeDerivative
variable = temperature
[]
[heatadv]
type = PorousFlowHeatAdvection
variable = temperature
[]
[conduction]
type = PorousFlowHeatConduction
variable = temperature
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas zi xnacl temperature'
number_fluid_phases = 2
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[fs]
type = PorousFlowBrineCO2
brine_fp = brine
co2_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[brine]
type = BrineFluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temperature
[]
[brineco2]
type = PorousFlowFluidState
gas_porepressure = pgas
z = zi
temperature = temperature
temperature_unit = Celsius
xnacl = xnacl
capillary_pressure = pc
fluid_state = fs
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.1
sum_s_res = 0.1
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
[]
[rockheat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1000
density = 2500
[]
[rock_thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '50 0 0 0 50 0 0 0 50'
[]
[]
[BCs]
[cold_gas]
type = DirichletBC
boundary = left
variable = temperature
value = 20
[]
[gas_injecton]
type = PorousFlowSink
boundary = left
variable = zi
flux_function = -0.159155
[]
[rightwater]
type = DirichletBC
boundary = right
value = 20e6
variable = pgas
[]
[righttemp]
type = DirichletBC
boundary = right
value = 70
variable = temperature
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu NONZERO 2'
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
end_time = 1e4
nl_abs_tol = 1e-7
nl_rel_tol = 1e-5
# Avoids failing first time step in parallel
line_search = 'none'
[TimeStepper]
type = IterationAdaptiveDT
dt = 1
growth_factor = 1.5
[]
[]
[Postprocessors]
[pgas]
type = PointValue
point = '2 0 0'
variable = pgas
[]
[sgas]
type = PointValue
point = '2 0 0'
variable = saturation_gas
[]
[zi]
type = PointValue
point = '2 0 0'
variable = zi
[]
[temperature]
type = PointValue
point = '2 0 0'
variable = temperature
[]
[massgas]
type = PorousFlowFluidMass
fluid_component = 1
[]
[x1]
type = PointValue
point = '2 0 0'
variable = x1
[]
[y0]
type = PointValue
point = '2 0 0'
variable = y0
[]
[]
[Outputs]
print_linear_residuals = false
perf_graph = true
csv = true
[]
(modules/porous_flow/examples/flow_through_fractured_media/fine_steady.i)
# Using a mixed-dimensional mesh
# Steady-state porepressure distribution along a fracture in a porous matrix
# This is used to initialise the transient solute-transport simulation
[Mesh]
type = FileMesh
# The gold mesh is used to reduce the number of large files in the MOOSE repository.
# The porepressure is not read from the gold mesh
file = 'gold/fine_steady_out.e'
block_id = '1 2 3'
block_name = 'fracture matrix1 matrix2'
boundary_id = '1 2'
boundary_name = 'bottom top'
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[pp]
[]
[]
[ICs]
[pp]
type = ConstantIC
variable = pp
value = 1e6
[]
[]
[BCs]
[ptop]
type = DirichletBC
variable = pp
boundary = top
value = 1e6
[]
[pbottom]
type = DirichletBC
variable = pp
boundary = bottom
value = 1.002e6
[]
[]
[Kernels]
[adv0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseFullySaturated
porepressure = pp
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[relp]
type = PorousFlowRelativePermeabilityConst
phase = 0
[]
[permeability1]
type = PorousFlowPermeabilityConst
permeability = '1.8e-11 0 0 0 1.8e-11 0 0 0 1.8e-11' # kf=3e-8, a=6e-4m. 1.8e-11 = kf * a
block = 'fracture'
[]
[permeability2]
type = PorousFlowPermeabilityConst
permeability = '1e-20 0 0 0 1e-20 0 0 0 1e-20'
block = 'matrix1 matrix2'
[]
[]
[Preconditioning]
active = basic
[mumps_is_best_for_parallel_jobs]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu mumps'
[]
[basic]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu NONZERO 2 '
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
# controls for nonlinear iterations
nl_abs_tol = 1e-9
nl_rel_tol = 1e-14
[]
[Outputs]
exodus = true
execute_on = 'timestep_end'
[]
(modules/porous_flow/test/tests/flux_limited_TVD_pflow/pffltvd_2D_angle.i)
# Using flux-limited TVD advection ala Kuzmin and Turek, mploying PorousFlow Kernels and UserObjects, with superbee flux-limiter
# 2D version with velocity = (0.1, 0.2, 0)
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
xmin = 0
xmax = 1
ny = 10
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[porepressure]
[]
[tracer]
[]
[]
[ICs]
[porepressure]
type = FunctionIC
variable = porepressure
function = '1 - x - 2 * y'
[]
[tracer]
type = FunctionIC
variable = tracer
function = 'if(x<0.1 | x > 0.3 | y < 0.1 | y > 0.3, 0, 1)'
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = tracer
[]
[flux0]
type = PorousFlowFluxLimitedTVDAdvection
variable = tracer
advective_flux_calculator = advective_flux_calculator_0
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = porepressure
[]
[flux1]
type = PorousFlowFluxLimitedTVDAdvection
variable = porepressure
advective_flux_calculator = advective_flux_calculator_1
[]
[]
[BCs]
[constant_boundary_porepressure]
type = FunctionDirichletBC
variable = porepressure
function = '1 - x - 2 * y'
boundary = 'left right top bottom'
[]
[no_tracer_at_boundary]
type = DirichletBC
variable = tracer
value = 0
boundary = 'left right top bottom'
[]
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2E9
thermal_expansion = 0
viscosity = 1.0
density0 = 1000.0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure tracer'
number_fluid_phases = 1
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
[]
[advective_flux_calculator_0]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
flux_limiter_type = superbee
fluid_component = 0
[]
[advective_flux_calculator_1]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
flux_limiter_type = superbee
fluid_component = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = porepressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = tracer
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = the_simple_fluid
phase = 0
[]
[relperm]
type = PorousFlowRelativePermeabilityConst
phase = 0
[]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-2 0 0 0 1E-2 0 0 0 1E-2'
[]
[]
[Preconditioning]
active = basic
[basic]
type = SMP
full = true
petsc_options = '-ksp_diagonal_scale -ksp_diagonal_scale_fix'
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = ' asm lu NONZERO 2'
[]
[preferred_but_might_not_be_installed]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu mumps'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 0.3
dt = 0.1
[]
[Outputs]
[out]
type = Exodus
execute_on = 'initial final'
[]
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_fully_saturated_2.i)
# Pressure pulse in 1D with 1 phase - transient
# using the PorousFlowFullySaturatedDarcyBase Kernel
# and the PorousFlowFullySaturatedMassTimeDerivative Kernel
[Mesh]
type = GeneratedMesh
dim = 1
nx = 20
xmin = 0
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 2E6
[]
[]
[Kernels]
[mass0]
type = PorousFlowFullySaturatedMassTimeDerivative
variable = pp
[]
[flux]
type = PorousFlowFullySaturatedDarcyBase
variable = pp
gravity = '0 0 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[]
[Materials]
[temperature_qp]
type = PorousFlowTemperature
[]
[ppss_qp]
type = PorousFlow1PhaseFullySaturated
porepressure = pp
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid_qp]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[biot_modulus]
type = PorousFlowConstantBiotModulus
fluid_bulk_modulus = 2E9
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-15'
[]
[]
[BCs]
[left]
type = DirichletBC
boundary = left
value = 3E6
variable = pp
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-20 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E3
end_time = 1E4
[]
[Postprocessors]
[p005]
type = PointValue
variable = pp
point = '5 0 0'
execute_on = 'initial timestep_end'
[]
[p015]
type = PointValue
variable = pp
point = '15 0 0'
execute_on = 'initial timestep_end'
[]
[p025]
type = PointValue
variable = pp
point = '25 0 0'
execute_on = 'initial timestep_end'
[]
[p035]
type = PointValue
variable = pp
point = '35 0 0'
execute_on = 'initial timestep_end'
[]
[p045]
type = PointValue
variable = pp
point = '45 0 0'
execute_on = 'initial timestep_end'
[]
[p055]
type = PointValue
variable = pp
point = '55 0 0'
execute_on = 'initial timestep_end'
[]
[p065]
type = PointValue
variable = pp
point = '65 0 0'
execute_on = 'initial timestep_end'
[]
[p075]
type = PointValue
variable = pp
point = '75 0 0'
execute_on = 'initial timestep_end'
[]
[p085]
type = PointValue
variable = pp
point = '85 0 0'
execute_on = 'initial timestep_end'
[]
[p095]
type = PointValue
variable = pp
point = '95 0 0'
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
file_base = pressure_pulse_1d_fully_saturated_2
print_linear_residuals = false
csv = true
[]
(modules/porous_flow/test/tests/actions/fullsat_brine_except4.i)
# Check error when using PorousFlowFullySaturated action,
# attempting to use PorousFlowSingleComponentFluid but with no fp specified
[Mesh]
type = GeneratedMesh
dim = 1
nx = 1
[]
[GlobalParams]
block = '0'
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[PorousFlowFullySaturated]
coupling_type = ThermoHydro
porepressure = pp
temperature = temp
mass_fraction_vars = "nacl"
fluid_properties_type = PorousFlowSingleComponentFluid
dictator_name = dictator
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
[]
[]
[Variables]
[pp]
initial_condition = 20E6
[]
[temp]
initial_condition = 323.15
[]
[nacl]
initial_condition = 0.1047
[]
[]
[Kernels]
# All provided by PorousFlowFullySaturated action
[]
[BCs]
[t_bdy]
type = DirichletBC
variable = temp
boundary = 'left right'
value = 323.15
[]
[p_bdy]
type = DirichletBC
variable = pp
boundary = 'left right'
value = 20E6
[]
[nacl_bdy]
type = DirichletBC
variable = nacl
boundary = 'left right'
value = 0.1047
[]
[]
[Materials]
# Thermal conductivity
[thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '3 0 0 0 3 0 0 0 3'
wet_thermal_conductivity = '3 0 0 0 3 0 0 0 3'
[]
# Specific heat capacity
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 850
density = 2700
[]
# Permeability
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-13 0 0 0 1E-13 0 0 0 1E-13'
[]
# Porosity
[porosity]
type = PorousFlowPorosityConst
porosity = 0.3
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
file_base = fullsat_brine_except2
[]
(modules/porous_flow/test/tests/jacobian/fflux01_fully_saturated.i)
# 1phase, 3components, constant viscosity, constant insitu permeability
# density with constant bulk, nonzero gravity
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[massfrac0]
[]
[massfrac1]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = -0.7+x+y
[]
[massfrac0]
type = RandomIC
variable = massfrac0
min = 0
max = 0.3
[]
[massfrac1]
type = RandomIC
variable = massfrac1
min = 0
max = 0.4
[]
[]
[Kernels]
[flux0]
type = PorousFlowFullySaturatedDarcyFlow
fluid_component = 0
variable = pp
gravity = '-1 -0.1 0'
[]
[flux1]
type = PorousFlowFullySaturatedDarcyFlow
fluid_component = 1
variable = massfrac0
gravity = '-1 -0.1 0'
[]
[flux2]
type = PorousFlowFullySaturatedDarcyFlow
fluid_component = 2
variable = massfrac1
gravity = '-1 -0.1 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp massfrac0 massfrac1'
number_fluid_phases = 1
number_fluid_components = 3
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseFullySaturated
porepressure = pp
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac0 massfrac1'
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[]
[Preconditioning]
active = check
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/sinks/s14.i)
# Apply a PorousFlowPointSourceFromPostprocessor that injects 1kg/s into a 2D model, and PorousFlowOutflowBCs to the outer boundaries to show that the PorousFlowOutflowBCs allow fluid to exit freely at the appropriate rate
[Mesh]
type = GeneratedMesh
dim = 2
nx = 3
xmin = -1
xmax = 1
ny = 2
ymin = -2
ymax = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[pp]
[]
[]
[PorousFlowFullySaturated]
fp = simple_fluid
porepressure = pp
[]
[DiracKernels]
[injection]
type = PorousFlowPointSourceFromPostprocessor
mass_flux = 1
point = '0 0 0'
variable = pp
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.12
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0.4 0 0 0 0.4 0 0 0 0.4'
[]
[]
[BCs]
[outflow]
type = PorousFlowOutflowBC
boundary = 'left right top bottom'
variable = pp
save_in = nodal_outflow
[]
[]
[AuxVariables]
[nodal_outflow]
[]
[]
[Postprocessors]
[outflow_kg_per_s]
type = NodalSum
boundary = 'left right top bottom'
variable = nodal_outflow
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 3E-4
end_time = 30E-4
nl_abs_tol = 1E-9
nl_rel_tol = 1E-9
[]
[Outputs]
csv = true
[]
(modules/porous_flow/test/tests/jacobian/waterncg_gas.i)
# Tests correct calculation of properties derivatives in PorousFlowWaterNCG
# for conditions that give a single gas phase
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[pgas]
[]
[z]
[]
[]
[ICs]
[pgas]
type = RandomIC
min = 1e4
max = 4e4
variable = pgas
[]
[z]
type = RandomIC
min = 0.88
max = 0.98
variable = z
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pgas
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = z
fluid_component = 1
[]
[adv0]
type = PorousFlowAdvectiveFlux
variable = pgas
fluid_component = 0
[]
[adv1]
type = PorousFlowAdvectiveFlux
variable = z
fluid_component = 1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas z'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
pc_max = 1e3
[]
[fs]
type = PorousFlowWaterNCG
water_fp = water
gas_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[water]
type = Water97FluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 50
[]
[waterncg]
type = PorousFlowFluidState
gas_porepressure = pgas
z = z
temperature_unit = Celsius
capillary_pressure = pc
fluid_state = fs
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[AuxVariables]
[sgas]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[sgas]
type = PorousFlowPropertyAux
property = saturation
phase = 1
variable = sgas
[]
[]
[Postprocessors]
[sgas_min]
type = ElementExtremeValue
variable = sgas
value_type = min
[]
[sgas_max]
type = ElementExtremeValue
variable = sgas
value_type = max
[]
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2comp.i)
# Pressure pulse in 1D with 1 phase but 2 components (where density and viscosity depend on mass fraction)
# This test uses BrineFluidProperties with the PorousFlowMultiComponentFluid material, but could be run using
# the PorousFlowBrine material instead.
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp xnacl'
number_fluid_phases = 1
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[]
[Variables]
[pp]
initial_condition = 1e6
[]
[xnacl]
initial_condition = 0
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = xnacl
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = xnacl
[]
[]
[AuxVariables]
[density]
family = MONOMIAL
order = FIRST
[]
[]
[AuxKernels]
[density]
type = PorousFlowPropertyAux
variable = density
property = density
phase = 0
execute_on = 'initial timestep_end'
[]
[]
[FluidProperties]
[brine]
type = BrineFluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 293
[]
[mass_fractions]
type = PorousFlowMassFraction
mass_fraction_vars = xnacl
[]
[ps]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[brine]
type = PorousFlowMultiComponentFluid
x = xnacl
fp = brine
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-7 0 0 0 1e-7 0 0 0 1e-7'
[]
[relperm]
type = PorousFlowRelativePermeabilityConst
kr = 1
phase = 0
[]
[]
[BCs]
[left_p]
type = DirichletBC
boundary = left
value = 2e6
variable = pp
[]
[right_p]
type = DirichletBC
boundary = right
value = 1e6
variable = pp
[]
[left_xnacl]
type = DirichletBC
boundary = left
value = 0.2
variable = xnacl
[]
[right_xnacl]
type = DirichletBC
boundary = right
value = 0
variable = xnacl
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -pc_factor_shift_type'
petsc_options_value = 'bcgs lu NONZERO'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 5
[]
[Postprocessors]
[p000]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = 'initial timestep_end'
[]
[p050]
type = PointValue
variable = pp
point = '50 0 0'
execute_on = 'initial timestep_end'
[]
[p100]
type = PointValue
variable = pp
point = '100 0 0'
execute_on = 'initial timestep_end'
[]
[xnacl_000]
type = PointValue
variable = xnacl
point = '0 0 0'
execute_on = 'initial timestep_end'
[]
[density_000]
type = PointValue
variable = density
point = '0 0 0'
execute_on = 'initial timestep_end'
[]
[xnacl_020]
type = PointValue
variable = xnacl
point = '20 0 0'
execute_on = 'initial timestep_end'
[]
[density_020]
type = PointValue
variable = density
point = '20 0 0'
execute_on = 'initial timestep_end'
[]
[xnacl_040]
type = PointValue
variable = xnacl
point = '40 0 0'
execute_on = 'initial timestep_end'
[]
[density_040]
type = PointValue
variable = density
point = '40 0 0'
execute_on = 'initial timestep_end'
[]
[xnacl_060]
type = PointValue
variable = xnacl
point = '60 0 0'
execute_on = 'initial timestep_end'
[]
[density_060]
type = PointValue
variable = density
point = '60 0 0'
execute_on = 'initial timestep_end'
[]
[xnacl_080]
type = PointValue
variable = xnacl
point = '80 0 0'
execute_on = 'initial timestep_end'
[]
[density_080]
type = PointValue
variable = density
point = '80 0 0'
execute_on = 'initial timestep_end'
[]
[xnacl_100]
type = PointValue
variable = xnacl
point = '100 0 0'
execute_on = 'initial timestep_end'
[]
[density_100]
type = PointValue
variable = density
point = '100 0 0'
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
csv = true
[]
(modules/porous_flow/test/tests/flux_limited_TVD_pflow/pffltvd_2D_trimesh.i)
# Using flux-limited TVD advection ala Kuzmin and Turek, mploying PorousFlow Kernels and UserObjects, with superbee flux-limiter
# 2D version
[Mesh]
type = FileMesh
file = trimesh.msh
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
block = '50'
[]
[Variables]
[porepressure]
[]
[tracer]
[]
[]
[ICs]
[porepressure]
type = FunctionIC
variable = porepressure
function = '1 - x'
[]
[tracer]
type = FunctionIC
variable = tracer
function = 'if(x<0.1,0,if(x>0.305,0,1))'
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = tracer
[]
[flux0]
type = PorousFlowFluxLimitedTVDAdvection
variable = tracer
advective_flux_calculator = advective_flux_calculator_0
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = porepressure
[]
[flux1]
type = PorousFlowFluxLimitedTVDAdvection
variable = porepressure
advective_flux_calculator = advective_flux_calculator_1
[]
[]
[BCs]
[constant_injection_porepressure]
type = DirichletBC
variable = porepressure
value = 1
boundary = left
[]
[no_tracer_on_left]
type = DirichletBC
variable = tracer
value = 0
boundary = left
[]
[remove_component_1]
type = PorousFlowPiecewiseLinearSink
variable = porepressure
boundary = right
fluid_phase = 0
pt_vals = '0 1E3'
multipliers = '0 1E3'
mass_fraction_component = 1
use_mobility = true
flux_function = 1E3
[]
[remove_component_0]
type = PorousFlowPiecewiseLinearSink
variable = tracer
boundary = right
fluid_phase = 0
pt_vals = '0 1E3'
multipliers = '0 1E3'
mass_fraction_component = 0
use_mobility = true
flux_function = 1E3
[]
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2E9
thermal_expansion = 0
viscosity = 1.0
density0 = 1000.0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure tracer'
number_fluid_phases = 1
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
[]
[advective_flux_calculator_0]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
flux_limiter_type = superbee
fluid_component = 0
[]
[advective_flux_calculator_1]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
flux_limiter_type = superbee
fluid_component = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = porepressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = tracer
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = the_simple_fluid
phase = 0
[]
[relperm]
type = PorousFlowRelativePermeabilityConst
phase = 0
[]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-2 0 0 0 1E-2 0 0 0 1E-2'
[]
[]
[Preconditioning]
active = basic
[basic]
type = SMP
full = true
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = ' asm lu NONZERO 2'
[]
[preferred_but_might_not_be_installed]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu mumps'
[]
[]
[VectorPostprocessors]
[tracer]
type = LineValueSampler
start_point = '0 0 0'
end_point = '1 0.04 0'
num_points = 101
sort_by = x
variable = tracer
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 6
dt = 6E-2
nl_abs_tol = 1E-8
timestep_tolerance = 1E-3
[]
[Outputs]
print_linear_residuals = false
[out]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/test/tests/infiltration_and_drainage/bw01.i)
[Mesh]
type = GeneratedMesh
dim = 2
nx = 400
ny = 1
xmin = -10
xmax = 10
ymin = 0
ymax = 0.05
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Functions]
[dts]
type = PiecewiseLinear
y = '1E-5 1E-2 1E-2 1E-1'
x = '0 1E-5 1 10'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = pressure
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureBW
Sn = 0.0
Ss = 1.0
C = 1.5
las = 2
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 4
density0 = 10
thermal_expansion = 0
[]
[]
[Materials]
[massfrac]
type = PorousFlowMassFraction
[]
[temperature]
type = PorousFlowTemperature
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pressure
capillary_pressure = pc
[]
[relperm]
type = PorousFlowRelativePermeabilityBW
Sn = 0.0
Ss = 1.0
Kn = 0
Ks = 1
C = 1.5
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.25
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 1 0 0 0 1'
[]
[]
[Variables]
[pressure]
initial_condition = -9E2
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pressure
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pressure
gravity = '-0.1 0 0'
[]
[]
[AuxVariables]
[SWater]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[SWater]
type = MaterialStdVectorAux
property = PorousFlow_saturation_qp
index = 0
variable = SWater
[]
[]
[BCs]
[recharge]
type = PorousFlowSink
variable = pressure
boundary = right
flux_function = -1.25 # corresponds to Rstar being 0.5 because i have to multiply by density*porosity
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu NONZERO 2 1E-10 1E-10 10000'
[]
[]
[VectorPostprocessors]
[swater]
type = LineValueSampler
warn_discontinuous_face_values = false
variable = SWater
start_point = '-10 0 0'
end_point = '10 0 0'
sort_by = x
num_points = 101
execute_on = timestep_end
[]
[]
[Executioner]
type = Transient
solve_type = Newton
petsc_options = '-snes_converged_reason'
end_time = 8
[TimeStepper]
type = FunctionDT
function = dts
[]
[]
[Outputs]
file_base = bw01
sync_times = '0.5 2 8'
[exodus]
type = Exodus
sync_only = true
[]
[along_line]
type = CSV
sync_only = true
[]
[]
(modules/porous_flow/test/tests/fluidstate/water_vapor.i)
# Tests correct calculation of properties in PorousFlowWaterVapor in the two-phase region
[Mesh]
type = GeneratedMesh
dim = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pliq]
initial_condition = 1e6
[]
[h]
initial_condition = 8e5
scaling = 1e-3
[]
[]
[AuxVariables]
[pressure_gas]
order = CONSTANT
family = MONOMIAL
[]
[pressure_water]
order = CONSTANT
family = MONOMIAL
[]
[enthalpy_gas]
order = CONSTANT
family = MONOMIAL
[]
[enthalpy_water]
order = CONSTANT
family = MONOMIAL
[]
[saturation_gas]
order = CONSTANT
family = MONOMIAL
[]
[saturation_water]
order = CONSTANT
family = MONOMIAL
[]
[density_water]
order = CONSTANT
family = MONOMIAL
[]
[density_gas]
order = CONSTANT
family = MONOMIAL
[]
[viscosity_water]
order = CONSTANT
family = MONOMIAL
[]
[viscosity_gas]
order = CONSTANT
family = MONOMIAL
[]
[temperature]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[enthalpy_water]
type = PorousFlowPropertyAux
variable = enthalpy_water
property = enthalpy
phase = 0
execute_on = 'initial timestep_end'
[]
[enthalpy_gas]
type = PorousFlowPropertyAux
variable = enthalpy_gas
property = enthalpy
phase = 1
execute_on = 'initial timestep_end'
[]
[pressure_water]
type = PorousFlowPropertyAux
variable = pressure_water
property = pressure
phase = 0
execute_on = 'initial timestep_end'
[]
[pressure_gas]
type = PorousFlowPropertyAux
variable = pressure_gas
property = pressure
phase = 1
execute_on = 'initial timestep_end'
[]
[saturation_water]
type = PorousFlowPropertyAux
variable = saturation_water
property = saturation
phase = 0
execute_on = 'initial timestep_end'
[]
[saturation_gas]
type = PorousFlowPropertyAux
variable = saturation_gas
property = saturation
phase = 1
execute_on = 'initial timestep_end'
[]
[density_water]
type = PorousFlowPropertyAux
variable = density_water
property = density
phase = 0
execute_on = 'initial timestep_end'
[]
[density_gas]
type = PorousFlowPropertyAux
variable = density_gas
property = density
phase = 1
execute_on = 'initial timestep_end'
[]
[viscosity_water]
type = PorousFlowPropertyAux
variable = viscosity_water
property = viscosity
phase = 0
execute_on = 'initial timestep_end'
[]
[viscosity_gas]
type = PorousFlowPropertyAux
variable = viscosity_gas
property = viscosity
phase = 1
execute_on = 'initial timestep_end'
[]
[temperature]
type = PorousFlowPropertyAux
variable = temperature
property = temperature
execute_on = 'initial timestep_end'
[]
[]
[Kernels]
[mass]
type = PorousFlowMassTimeDerivative
variable = pliq
[]
[heat]
type = PorousFlowEnergyTimeDerivative
variable = h
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pliq h'
number_fluid_phases = 2
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureBC
pe = 1e5
lambda = 2
pc_max = 1e6
[]
[fs]
type = PorousFlowWaterVapor
water_fp = water
capillary_pressure = pc
[]
[]
[FluidProperties]
[water]
type = Water97FluidProperties
[]
[]
[Materials]
[watervapor]
type = PorousFlowFluidStateSingleComponent
porepressure = pliq
enthalpy = h
temperature_unit = Celsius
capillary_pressure = pc
fluid_state = fs
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-13 0 0 0 1e-13 0 0 0 1e-13'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[internal_energy]
type = PorousFlowMatrixInternalEnergy
density = 2500
specific_heat_capacity = 1200
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
[density_water]
type = ElementAverageValue
variable = density_water
execute_on = 'initial timestep_end'
[]
[density_gas]
type = ElementAverageValue
variable = density_gas
execute_on = 'initial timestep_end'
[]
[viscosity_water]
type = ElementAverageValue
variable = viscosity_water
execute_on = 'initial timestep_end'
[]
[viscosity_gas]
type = ElementAverageValue
variable = viscosity_gas
execute_on = 'initial timestep_end'
[]
[enthalpy_water]
type = ElementAverageValue
variable = enthalpy_water
execute_on = 'initial timestep_end'
[]
[enthalpy_gas]
type = ElementAverageValue
variable = enthalpy_gas
execute_on = 'initial timestep_end'
[]
[sg]
type = ElementAverageValue
variable = saturation_gas
execute_on = 'initial timestep_end'
[]
[sw]
type = ElementAverageValue
variable = saturation_water
execute_on = 'initial timestep_end'
[]
[pwater]
type = ElementAverageValue
variable = pressure_water
execute_on = 'initial timestep_end'
[]
[pgas]
type = ElementAverageValue
variable = pressure_gas
execute_on = 'initial timestep_end'
[]
[temperature]
type = ElementAverageValue
variable = temperature
execute_on = 'initial timestep_end'
[]
[enthalpy]
type = ElementAverageValue
variable = h
execute_on = 'initial timestep_end'
[]
[liquid_mass]
type = PorousFlowFluidMass
phase = 0
execute_on = 'initial timestep_end'
[]
[vapor_mass]
type = PorousFlowFluidMass
phase = 1
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
file_base = water_vapor_twophase
csv = true
[]
(modules/porous_flow/test/tests/actions/addmaterials.i)
# Test that the PorousFlowAddMaterialAction correctly handles the case where
# materials are added with the default add_nodes parameter, as well as
# at_nodes = true, to make sure that the action doesn't add a duplicate material
[Mesh]
type = GeneratedMesh
dim = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[pwater]
initial_condition = 1e6
[]
[sgas]
initial_condition = 0.3
[]
[temperature]
initial_condition = 50
[]
[]
[AuxVariables]
[x0]
initial_condition = 0.1
[]
[x1]
initial_condition = 0.5
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pwater
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pwater
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = sgas
[]
[energy_dot]
type = PorousFlowEnergyTimeDerivative
variable = temperature
[]
[heat_advection]
type = PorousFlowHeatAdvection
variable = temperature
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pwater sgas temperature'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-5
pc_max = 1e7
sat_lr = 0.1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
cv = 2
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 1e9
viscosity = 1e-4
density0 = 20
thermal_expansion = 0
cv = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 50
[]
[temperature_nodal]
type = PorousFlowTemperature
at_nodes = true
temperature = 50
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = pwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[ppss_nodal]
type = PorousFlow2PhasePS
at_nodes = true
phase0_porepressure = pwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'x0 x1'
[]
[massfrac_nodal]
type = PorousFlowMassFraction
at_nodes = true
mass_fraction_vars = 'x0 x1'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid0_nodal]
type = PorousFlowSingleComponentFluid
at_nodes = true
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[simple_fluid1_nodal]
type = PorousFlowSingleComponentFluid
at_nodes = true
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.1
sum_s_res = 0.11
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
s_res = 0.01
sum_s_res = 0.11
[]
[relperm0_nodal]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
at_nodes = true
[]
[relperm1_nodal]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
at_nodes = true
[]
[porosity_nodal]
type = PorousFlowPorosityConst
porosity = 0.1
at_nodes = true
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1.0
density = 125
[]
[unused]
type = GenericConstantMaterial
prop_names = unused
prop_values = 0
[]
[]
[Executioner]
type = Transient
end_time = 1
nl_abs_tol = 1e-14
[]
(modules/porous_flow/test/tests/actions/addmaterials2.i)
# Test that the PorousFlowAddMaterialAction correctly handles the case where
# the at_nodes parameter isn't provided. In this case, only a single material
# is given, and the action must correctly identify if materials should be added
# at the nodes, qps, or even both
[Mesh]
type = GeneratedMesh
dim = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[pwater]
initial_condition = 1e6
[]
[sgas]
initial_condition = 0.3
[]
[temperature]
initial_condition = 50
[]
[]
[AuxVariables]
[x0]
initial_condition = 0.1
[]
[x1]
initial_condition = 0.5
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pwater
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pwater
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = sgas
[]
[energy_dot]
type = PorousFlowEnergyTimeDerivative
variable = temperature
[]
[heat_advection]
type = PorousFlowHeatAdvection
variable = temperature
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pwater sgas temperature'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-5
pc_max = 1e7
sat_lr = 0.1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
cv = 2
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 1e9
viscosity = 1e-4
density0 = 20
thermal_expansion = 0
cv = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 50
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = pwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'x0 x1'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.1
sum_s_res = 0.11
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
s_res = 0.01
sum_s_res = 0.11
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1.0
density = 125
[]
[unused]
type = GenericConstantMaterial
prop_names = unused
prop_values = 0
[]
[]
[Executioner]
type = Transient
end_time = 1
nl_abs_tol = 1e-14
[]
(modules/porous_flow/test/tests/infiltration_and_drainage/rd03.i)
[Mesh]
file = gold/rd02.e
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Functions]
[dts]
type = PiecewiseLinear
y = '2E4 1E6'
x = '0 1E6'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = pressure
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.336
alpha = 1.43e-4
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e7
viscosity = 1.01e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[massfrac]
type = PorousFlowMassFraction
[]
[temperature]
type = PorousFlowTemperature
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pressure
capillary_pressure = pc
[]
[relperm]
type = PorousFlowRelativePermeabilityVG
m = 0.336
seff_turnover = 0.99
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.33
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0.295E-12 0 0 0 0.295E-12 0 0 0 0.295E-12'
[]
[]
[Variables]
[pressure]
initial_from_file_timestep = LATEST
initial_from_file_var = pressure
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pressure
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pressure
gravity = '-10 0 0'
[]
[]
[AuxVariables]
[SWater]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[SWater]
type = MaterialStdVectorAux
property = PorousFlow_saturation_qp
index = 0
variable = SWater
[]
[]
[BCs]
[base]
type = DirichletBC
boundary = left
value = 0.0
variable = pressure
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu NONZERO 2 1E-10 1E-10 10'
[]
[]
[VectorPostprocessors]
[swater]
type = LineValueSampler
warn_discontinuous_face_values = false
variable = SWater
start_point = '0 0 0'
end_point = '6 0 0'
sort_by = x
num_points = 121
execute_on = timestep_end
[]
[]
[Executioner]
type = Transient
solve_type = Newton
petsc_options = '-snes_converged_reason'
end_time = 8.2944E6
[TimeStepper]
type = FunctionDT
function = dts
[]
[]
[Outputs]
file_base = rd03
[exodus]
type = Exodus
execute_on = 'initial final'
[]
[along_line]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_action.i)
# Pressure pulse in 1D with 1 phase - transient
# This input file uses the PorousFlowFullySaturated Action. For the non-Action version, see pressure_pulse_1d.i
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 2E6
[]
[]
[PorousFlowFullySaturated]
porepressure = pp
gravity = '0 0 0'
fp = simple_fluid
stabilization = Full
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-15'
[]
[]
[BCs]
[left]
type = DirichletBC
boundary = left
value = 3E6
variable = pp
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E3
end_time = 1E4
[]
[Postprocessors]
[p000]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = 'initial timestep_end'
[]
[p010]
type = PointValue
variable = pp
point = '10 0 0'
execute_on = 'initial timestep_end'
[]
[p020]
type = PointValue
variable = pp
point = '20 0 0'
execute_on = 'initial timestep_end'
[]
[p030]
type = PointValue
variable = pp
point = '30 0 0'
execute_on = 'initial timestep_end'
[]
[p040]
type = PointValue
variable = pp
point = '40 0 0'
execute_on = 'initial timestep_end'
[]
[p050]
type = PointValue
variable = pp
point = '50 0 0'
execute_on = 'initial timestep_end'
[]
[p060]
type = PointValue
variable = pp
point = '60 0 0'
execute_on = 'initial timestep_end'
[]
[p070]
type = PointValue
variable = pp
point = '70 0 0'
execute_on = 'initial timestep_end'
[]
[p080]
type = PointValue
variable = pp
point = '80 0 0'
execute_on = 'initial timestep_end'
[]
[p090]
type = PointValue
variable = pp
point = '90 0 0'
execute_on = 'initial timestep_end'
[]
[p100]
type = PointValue
variable = pp
point = '100 0 0'
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
file_base = pressure_pulse_1d
print_linear_residuals = false
csv = true
[]
(modules/porous_flow/test/tests/dispersion/diff01_fv.i)
# Test diffusive part of FVPorousFlowDispersiveFlux kernel by setting dispersion
# coefficients to zero. Pressure is held constant over the mesh, and gravity is
# set to zero so that no advective transport of mass takes place.
# Mass fraction is set to 1 on the left hand side and 0 on the right hand side.
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
nx = 20
xmax = 10
bias_x = 1.2
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[pp]
type = MooseVariableFVReal
[]
[massfrac0]
type = MooseVariableFVReal
[]
[]
[AuxVariables]
[velocity]
family = MONOMIAL
order = FIRST
[]
[]
[AuxKernels]
[velocity]
type = ADPorousFlowDarcyVelocityComponent
variable = velocity
component = x
[]
[]
[ICs]
[pp]
type = ConstantIC
variable = pp
value = 1e5
[]
[massfrac0]
type = ConstantIC
variable = massfrac0
value = 0
[]
[]
[FVBCs]
[left]
type = FVDirichletBC
value = 1
variable = massfrac0
boundary = left
[]
[right]
type = FVDirichletBC
value = 0
variable = massfrac0
boundary = right
[]
[pright]
type = FVDirichletBC
variable = pp
boundary = right
value = 1e5
[]
[pleft]
type = FVDirichletBC
variable = pp
boundary = left
value = 1e5
[]
[]
[FVKernels]
[mass0]
type = FVPorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[diff0_pp]
type = FVPorousFlowDispersiveFlux
fluid_component = 0
variable = pp
disp_trans = 0
disp_long = 0
[]
[mass1]
type = FVPorousFlowMassTimeDerivative
fluid_component = 1
variable = massfrac0
[]
[diff1_x]
type = FVPorousFlowDispersiveFlux
fluid_component = 1
variable = massfrac0
disp_trans = 0
disp_long = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp massfrac0'
number_fluid_phases = 1
number_fluid_components = 2
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1e7
density0 = 1000
viscosity = 0.001
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = ADPorousFlowTemperature
[]
[ppss]
type = ADPorousFlow1PhaseFullySaturated
porepressure = pp
[]
[massfrac]
type = ADPorousFlowMassFraction
mass_fraction_vars = massfrac0
[]
[simple_fluid]
type = ADPorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[poro]
type = ADPorousFlowPorosityConst
porosity = 0.3
[]
[diff]
type = ADPorousFlowDiffusivityConst
diffusion_coeff = '1 1'
tortuosity = 0.1
[]
[relp]
type = ADPorousFlowRelativePermeabilityConst
phase = 0
[]
[permeability]
type = ADPorousFlowPermeabilityConst
permeability = '1e-9 0 0 0 1e-9 0 0 0 1e-9'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu NONZERO 2 '
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1
end_time = 20
[]
[VectorPostprocessors]
[xmass]
type = ElementValueSampler
sort_by = id
variable = massfrac0
[]
[]
[Outputs]
[out]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/test/tests/fluidstate/theis_brineco2.i)
# Two phase Theis problem: Flow from single source.
# Constant rate injection 2 kg/s
# 1D cylindrical mesh
# Initially, system has only a liquid phase, until enough gas is injected
# to form a gas phase, in which case the system becomes two phase.
#
# This test takes a few minutes to run, so is marked heavy
[Mesh]
type = GeneratedMesh
dim = 1
nx = 2000
xmax = 2000
rz_coord_axis = Y
coord_type = RZ
[]
[Problem]
type = FEProblem
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[AuxVariables]
[saturation_gas]
order = CONSTANT
family = MONOMIAL
[]
[x1]
order = CONSTANT
family = MONOMIAL
[]
[y0]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[saturation_gas]
type = PorousFlowPropertyAux
variable = saturation_gas
property = saturation
phase = 1
execute_on = timestep_end
[]
[x1]
type = PorousFlowPropertyAux
variable = x1
property = mass_fraction
phase = 0
fluid_component = 1
execute_on = timestep_end
[]
[y0]
type = PorousFlowPropertyAux
variable = y0
property = mass_fraction
phase = 1
fluid_component = 0
execute_on = timestep_end
[]
[]
[Variables]
[pgas]
initial_condition = 20e6
[]
[zi]
initial_condition = 0
[]
[xnacl]
initial_condition = 0.1
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pgas
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pgas
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = zi
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = zi
[]
[mass2]
type = PorousFlowMassTimeDerivative
fluid_component = 2
variable = xnacl
[]
[flux2]
type = PorousFlowAdvectiveFlux
fluid_component = 2
variable = xnacl
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas zi xnacl'
number_fluid_phases = 2
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[fs]
type = PorousFlowBrineCO2
brine_fp = brine
co2_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2sw]
type = CO2FluidProperties
[]
[co2]
type = TabulatedFluidProperties
fp = co2sw
fluid_property_file = 'fluid_properties.csv'
allow_fp_and_tabulation = true
error_on_out_of_bounds = false
[]
[water]
type = Water97FluidProperties
[]
[watertab]
type = TabulatedFluidProperties
fp = water
temperature_min = 273.15
temperature_max = 573.15
fluid_property_output_file = water_fluid_properties.csv
# Comment out the fp parameter and uncomment below to use the newly generated tabulation
# fluid_property_file = water_fluid_properties.csv
[]
[brine]
type = BrineFluidProperties
water_fp = watertab
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 20
[]
[brineco2]
type = PorousFlowFluidState
gas_porepressure = pgas
z = zi
temperature_unit = Celsius
xnacl = xnacl
capillary_pressure = pc
fluid_state = fs
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.1
sum_s_res = 0.1
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
[]
[]
[BCs]
[rightwater]
type = DirichletBC
boundary = right
value = 20e6
variable = pgas
[]
[]
[DiracKernels]
[source]
type = PorousFlowSquarePulsePointSource
point = '0 0 0'
mass_flux = 2
variable = zi
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
end_time = 1e5
[TimeStepper]
type = IterationAdaptiveDT
dt = 1
growth_factor = 1.5
[]
[]
[VectorPostprocessors]
[line]
type = LineValueSampler
warn_discontinuous_face_values = false
sort_by = x
start_point = '0 0 0'
end_point = '2000 0 0'
num_points = 10000
variable = 'pgas zi xnacl x1 saturation_gas'
execute_on = 'timestep_end'
[]
[]
[Postprocessors]
[pgas]
type = PointValue
point = '4 0 0'
variable = pgas
[]
[sgas]
type = PointValue
point = '4 0 0'
variable = saturation_gas
[]
[zi]
type = PointValue
point = '4 0 0'
variable = zi
[]
[massgas]
type = PorousFlowFluidMass
fluid_component = 1
[]
[x1]
type = PointValue
point = '4 0 0'
variable = x1
[]
[y0]
type = PointValue
point = '4 0 0'
variable = y0
[]
[xnacl]
type = PointValue
point = '4 0 0'
variable = xnacl
[]
[]
[Outputs]
print_linear_residuals = false
perf_graph = true
[csvout]
type = CSV
execute_on = timestep_end
execute_vector_postprocessors_on = final
[]
[]
(modules/porous_flow/test/tests/poro_elasticity/pp_generation_fullysat_action.i)
# Same as pp_generation.i, but using an Action
#
# A sample is constrained on all sides and its boundaries are
# also impermeable. Fluid is pumped into the sample via a
# volumetric source (ie kg/second per cubic meter), and the
# rise in porepressure is observed.
#
# Source = s (units = kg/m^3/second)
#
# Expect:
# fluid_mass = mass0 + s*t
# stress = 0 (remember this is effective stress)
# Porepressure = fluid_bulk*log(fluid_mass_density/density_P0), where fluid_mass_density = fluid_mass/porosity
# porosity = biot+(phi0-biot)*exp(pp(biot-1)/solid_bulk)
#
# Parameters:
# Biot coefficient = 0.3
# Phi0 = 0.1
# Solid Bulk modulus = 2
# fluid_bulk = 13
# density_P0 = 1
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -0.5
xmax = 0.5
ymin = -0.5
ymax = 0.5
zmin = -0.5
zmax = 0.5
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
PorousFlowDictator = dictator
block = 0
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[porepressure]
[]
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
thermal_expansion = 0.0
bulk_modulus = 13.0
viscosity = 1.0
density0 = 1.0
[]
[]
[PorousFlowFullySaturated]
coupling_type = HydroMechanical
displacements = 'disp_x disp_y disp_z'
porepressure = porepressure
biot_coefficient = 0.3
gravity = '0 0 0'
fp = the_simple_fluid
stabilization = none # not needed: there is no flow
save_component_rate_in = nodal_kg_per_s
[]
[BCs]
[confinex]
type = DirichletBC
variable = disp_x
value = 0
boundary = 'left right'
[]
[confiney]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'bottom top'
[]
[confinez]
type = DirichletBC
variable = disp_z
value = 0
boundary = 'back front'
[]
[]
[Kernels]
[source]
type = BodyForce
function = 0.1
variable = porepressure
[]
[]
[AuxVariables]
[nodal_kg_per_s]
[]
[porosity]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[porosity]
type = PorousFlowPropertyAux
variable = porosity
property = porosity
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '1 1.5'
# bulk modulus is lambda + 2*mu/3 = 1 + 2*1.5/3 = 2
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[porosity]
type = PorousFlowPorosity
fluid = true
mechanical = true
porosity_zero = 0.1
biot_coefficient = 0.3
solid_bulk = 2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 1 0 0 0 1' # unimportant
[]
[]
[Functions]
[porosity_analytic]
type = ParsedFunction
expression = 'biot+(phi0-biot)*exp(pp*(biot-1)/bulk)'
symbol_names = 'biot phi0 pp bulk'
symbol_values = '0.3 0.1 p0 2'
[]
[]
[Postprocessors]
[nodal_kg_per_s]
type = PointValue
point = ' 0 0 0'
variable = nodal_kg_per_s
outputs = csv
[]
[fluid_mass]
type = PorousFlowFluidMass
fluid_component = 0
execute_on = 'initial timestep_end'
[]
[porosity]
type = PointValue
outputs = 'console csv'
point = '0 0 0'
variable = porosity
[]
[p0]
type = PointValue
outputs = csv
point = '0 0 0'
variable = porepressure
[]
[porosity_analytic]
type = FunctionValuePostprocessor
function = porosity_analytic
[]
[zdisp]
type = PointValue
outputs = csv
point = '0 0 0.5'
variable = disp_z
[]
[stress_xx]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_xx
[]
[stress_yy]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_yy
[]
[stress_zz]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_zz
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-14 1E-10 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
start_time = 0
end_time = 10
dt = 1
[]
[Outputs]
execute_on = 'timestep_end'
file_base = pp_generation_fullysat_action
csv = true
[]
(modules/porous_flow/test/tests/poro_elasticity/pp_generation.i)
# A sample is constrained on all sides and its boundaries are
# also impermeable. Fluid is pumped into the sample via a
# volumetric source (ie kg/second per cubic meter), and the
# rise in porepressure is observed.
#
# Source = s (units = kg/m^3/second)
#
# Expect:
# fluid_mass = mass0 + s*t
# stress = 0 (remember this is effective stress)
# Porepressure = fluid_bulk*log(fluid_mass_density/density_P0), where fluid_mass_density = fluid_mass*porosity
# porosity = biot+(phi0-biot)*exp(pp(biot-1)/solid_bulk)
#
# Parameters:
# Biot coefficient = 0.3
# Phi0 = 0.1
# Solid Bulk modulus = 2
# fluid_bulk = 13
# density_P0 = 1
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -0.5
xmax = 0.5
ymin = -0.5
ymax = 0.5
zmin = -0.5
zmax = 0.5
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
PorousFlowDictator = dictator
block = 0
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure disp_x disp_y disp_z'
number_fluid_phases = 1
number_fluid_components = 1
[]
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[porepressure]
[]
[]
[BCs]
[confinex]
type = DirichletBC
variable = disp_x
value = 0
boundary = 'left right'
[]
[confiney]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'bottom top'
[]
[confinez]
type = DirichletBC
variable = disp_z
value = 0
boundary = 'back front'
[]
[]
[Kernels]
[grad_stress_x]
type = StressDivergenceTensors
variable = disp_x
component = 0
[]
[grad_stress_y]
type = StressDivergenceTensors
variable = disp_y
component = 1
[]
[grad_stress_z]
type = StressDivergenceTensors
variable = disp_z
component = 2
[]
[poro_x]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
variable = disp_x
component = 0
[]
[poro_y]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
variable = disp_y
component = 1
[]
[poro_z]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
component = 2
variable = disp_z
[]
[poro_vol_exp]
type = PorousFlowMassVolumetricExpansion
variable = porepressure
fluid_component = 0
[]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = porepressure
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = porepressure
gravity = '0 0 0'
fluid_component = 0
[]
[source]
type = BodyForce
function = 0.1
variable = porepressure
[]
[]
[AuxVariables]
[stress_xx]
order = CONSTANT
family = MONOMIAL
[]
[stress_xy]
order = CONSTANT
family = MONOMIAL
[]
[stress_xz]
order = CONSTANT
family = MONOMIAL
[]
[stress_yy]
order = CONSTANT
family = MONOMIAL
[]
[stress_yz]
order = CONSTANT
family = MONOMIAL
[]
[stress_zz]
order = CONSTANT
family = MONOMIAL
[]
[porosity]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
[]
[stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
[]
[stress_xz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xz
index_i = 0
index_j = 2
[]
[stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
[]
[stress_yz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yz
index_i = 1
index_j = 2
[]
[stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
[]
[porosity]
type = PorousFlowPropertyAux
variable = porosity
property = porosity
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 13
density0 = 1
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '1 1.5'
# bulk modulus is lambda + 2*mu/3 = 1 + 2*1.5/3 = 2
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[ppss]
type = PorousFlow1PhaseFullySaturated
porepressure = porepressure
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosity
fluid = true
mechanical = true
porosity_zero = 0.1
biot_coefficient = 0.3
solid_bulk = 2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 1 0 0 0 1' # unimportant
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0 # unimportant in this fully-saturated situation
phase = 0
[]
[]
[Functions]
[porosity_analytic]
type = ParsedFunction
expression = 'biot+(phi0-biot)*exp(pp*(biot-1)/bulk)'
symbol_names = 'biot phi0 pp bulk'
symbol_values = '0.3 0.1 p0 2'
[]
[]
[Postprocessors]
[fluid_mass]
type = PorousFlowFluidMass
fluid_component = 0
execute_on = 'initial timestep_end'
[]
[porosity]
type = PointValue
outputs = 'console csv'
point = '0 0 0'
variable = porosity
[]
[p0]
type = PointValue
outputs = csv
point = '0 0 0'
variable = porepressure
[]
[porosity_analytic]
type = FunctionValuePostprocessor
function = porosity_analytic
[]
[zdisp]
type = PointValue
outputs = csv
point = '0 0 0.5'
variable = disp_z
[]
[stress_xx]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_xx
[]
[stress_yy]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_yy
[]
[stress_zz]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_zz
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_max_it -snes_stol'
petsc_options_value = 'bcgs bjacobi 10000 1E-11'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
start_time = 0
end_time = 10
dt = 1
[]
[Outputs]
execute_on = 'timestep_end'
file_base = pp_generation
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/fluidstate/water_vapor_tab.i)
# Tests correct calculation of properties in PorousFlowWaterVapor in the two-phase region
[Mesh]
type = GeneratedMesh
dim = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pliq]
initial_condition = 1e6
[]
[h]
initial_condition = 8e5
scaling = 1e-3
[]
[]
[AuxVariables]
[pressure_gas]
order = CONSTANT
family = MONOMIAL
[]
[pressure_water]
order = CONSTANT
family = MONOMIAL
[]
[enthalpy_gas]
order = CONSTANT
family = MONOMIAL
[]
[enthalpy_water]
order = CONSTANT
family = MONOMIAL
[]
[saturation_gas]
order = CONSTANT
family = MONOMIAL
[]
[saturation_water]
order = CONSTANT
family = MONOMIAL
[]
[density_water]
order = CONSTANT
family = MONOMIAL
[]
[density_gas]
order = CONSTANT
family = MONOMIAL
[]
[viscosity_water]
order = CONSTANT
family = MONOMIAL
[]
[viscosity_gas]
order = CONSTANT
family = MONOMIAL
[]
[temperature]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[enthalpy_water]
type = PorousFlowPropertyAux
variable = enthalpy_water
property = enthalpy
phase = 0
execute_on = 'initial timestep_end'
[]
[enthalpy_gas]
type = PorousFlowPropertyAux
variable = enthalpy_gas
property = enthalpy
phase = 1
execute_on = 'initial timestep_end'
[]
[pressure_water]
type = PorousFlowPropertyAux
variable = pressure_water
property = pressure
phase = 0
execute_on = 'initial timestep_end'
[]
[pressure_gas]
type = PorousFlowPropertyAux
variable = pressure_gas
property = pressure
phase = 1
execute_on = 'initial timestep_end'
[]
[saturation_water]
type = PorousFlowPropertyAux
variable = saturation_water
property = saturation
phase = 0
execute_on = 'initial timestep_end'
[]
[saturation_gas]
type = PorousFlowPropertyAux
variable = saturation_gas
property = saturation
phase = 1
execute_on = 'initial timestep_end'
[]
[density_water]
type = PorousFlowPropertyAux
variable = density_water
property = density
phase = 0
execute_on = 'initial timestep_end'
[]
[density_gas]
type = PorousFlowPropertyAux
variable = density_gas
property = density
phase = 1
execute_on = 'initial timestep_end'
[]
[viscosity_water]
type = PorousFlowPropertyAux
variable = viscosity_water
property = viscosity
phase = 0
execute_on = 'initial timestep_end'
[]
[viscosity_gas]
type = PorousFlowPropertyAux
variable = viscosity_gas
property = viscosity
phase = 1
execute_on = 'initial timestep_end'
[]
[temperature]
type = PorousFlowPropertyAux
variable = temperature
property = temperature
execute_on = 'initial timestep_end'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pliq h'
number_fluid_phases = 2
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureBC
pe = 1e5
lambda = 2
pc_max = 1e6
[]
[fs]
type = PorousFlowWaterVapor
water_fp = water
capillary_pressure = pc
[]
[]
[FluidProperties]
[water_true]
type = Water97FluidProperties
[]
[water]
type = TabulatedBicubicFluidProperties
fp = water_true
allow_fp_and_tabulation = true
fluid_property_file = fluid_properties_extended.csv
[]
[]
[Materials]
[watervapor]
type = PorousFlowFluidStateSingleComponent
porepressure = pliq
enthalpy = h
temperature_unit = Kelvin
capillary_pressure = pc
fluid_state = fs
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-13 0 0 0 1e-13 0 0 0 1e-13'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[internal_energy]
type = PorousFlowMatrixInternalEnergy
density = 2500
specific_heat_capacity = 1200
[]
[]
[Problem]
solve = false
[]
[Executioner]
type = Steady
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
[density_water]
type = ElementAverageValue
variable = density_water
execute_on = 'initial timestep_end'
[]
[density_gas]
type = ElementAverageValue
variable = density_gas
execute_on = 'initial timestep_end'
[]
[viscosity_water]
type = ElementAverageValue
variable = viscosity_water
execute_on = 'initial timestep_end'
[]
[viscosity_gas]
type = ElementAverageValue
variable = viscosity_gas
execute_on = 'initial timestep_end'
[]
[enthalpy_water]
type = ElementAverageValue
variable = enthalpy_water
execute_on = 'initial timestep_end'
[]
[enthalpy_gas]
type = ElementAverageValue
variable = enthalpy_gas
execute_on = 'initial timestep_end'
[]
[sg]
type = ElementAverageValue
variable = saturation_gas
execute_on = 'initial timestep_end'
[]
[sw]
type = ElementAverageValue
variable = saturation_water
execute_on = 'initial timestep_end'
[]
[pwater]
type = ElementAverageValue
variable = pressure_water
execute_on = 'initial timestep_end'
[]
[pgas]
type = ElementAverageValue
variable = pressure_gas
execute_on = 'initial timestep_end'
[]
[temperature]
type = ElementAverageValue
variable = temperature
execute_on = 'initial timestep_end'
[]
[enthalpy]
type = ElementAverageValue
variable = h
execute_on = 'initial timestep_end'
[]
[liquid_mass]
type = PorousFlowFluidMass
phase = 0
execute_on = 'initial timestep_end'
[]
[vapor_mass]
type = PorousFlowFluidMass
phase = 1
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
file_base = water_vapor_twophase_tab
csv = true
execute_on = INITIAL
[]
(modules/porous_flow/test/tests/dirackernels/bh02reporter.i)
# fully-saturated
# production
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[UserObjects]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
# Because the Variable for this Sink is pp, and pp is associated
# with the fluid-mass conservation equation, this sink is extracting
# fluid mass (and not heat energy or something else)
variable = pp
# The following specfies that the total fluid mass coming out of
# the porespace via this sink in this timestep should be recorded
# in the pls_total_outflow_mass UserObject
SumQuantityUO = borehole_total_outflow_mass
# The following file defines the polyline geometry
# which is just two points in this particular example
weight_reporter='bh02file/column_0'
x_coord_reporter='bh02file/column_1'
y_coord_reporter='bh02file/column_2'
z_coord_reporter='bh02file/column_3'
# First, we want Peacemans f to be a function of porepressure (and not
# temperature or something else). So bottom_p_or_t is actually porepressure
function_of = pressure
fluid_phase = 0
# The bottomhole pressure
bottom_p_or_t = 0
# In this example there is no increase of the wellbore pressure
# due to gravity:
unit_weight = '0 0 0'
# PeacemanBoreholes should almost always have use_mobility = true
use_mobility = true
# This is a production wellbore (a sink of fluid that removes fluid from porespace)
character = 1
[]
[]
[VectorPostprocessors]
[bh02file]
type = CSVReader
csv_file = bh02.bh
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
indirect_dependencies = 'fluid_mass1 fluid_mass0 bh_report'
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
expression = abs((a-c+d)/2/(a+c))
symbol_names = 'a c d'
symbol_values = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
[Outputs]
exodus = false
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/test/tests/jacobian/fflux09.i)
# 2phase (PP), 3components (that exist in both phases), constant viscosity, constant insitu permeability
# density with constant bulk, Corey relative perm, nonzero gravity, unsaturated with RSC capillary
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[massfrac_ph0_sp0]
[]
[]
[AuxVariables]
[massfrac_ph0_sp1]
[]
[massfrac_ph1_sp0]
[]
[massfrac_ph1_sp1]
[]
[]
[ICs]
[ppwater]
type = RandomIC
variable = ppwater
min = -1
max = 0
[]
[ppgas]
type = RandomIC
variable = ppgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 0.4
[]
[massfrac_ph0_sp1]
type = RandomIC
variable = massfrac_ph0_sp1
min = 0
max = 0.4
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 0.4
[]
[massfrac_ph1_sp1]
type = RandomIC
variable = massfrac_ph1_sp1
min = 0
max = 0.4
[]
[]
[Kernels]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = ppwater
gravity = '-1 -0.1 0'
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = ppgas
gravity = '-1 -0.1 0'
[]
[flux2]
type = PorousFlowAdvectiveFlux
fluid_component = 2
variable = massfrac_ph0_sp0
gravity = '-1 -0.1 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas massfrac_ph0_sp0'
number_fluid_phases = 2
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureRSC
shift = -0.1
scale_ratio = 3
oil_viscosity = 2
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph0_sp1 massfrac_ph1_sp0 massfrac_ph1_sp1'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/infiltration_and_drainage/rd01.i)
[Mesh]
type = GeneratedMesh
dim = 2
nx = 120
ny = 1
xmin = 0
xmax = 6
ymin = 0
ymax = 0.05
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Functions]
[dts]
type = PiecewiseLinear
y = '1E-2 1 10 500 5000 5000'
x = '0 10 100 1000 10000 100000'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = pressure
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.336
alpha = 1.43e-4
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e7
viscosity = 1.01e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[Materials]
[massfrac]
type = PorousFlowMassFraction
[]
[temperature]
type = PorousFlowTemperature
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pressure
capillary_pressure = pc
[]
[relperm]
type = PorousFlowRelativePermeabilityVG
m = 0.336
seff_turnover = 0.99
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.33
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0.295E-12 0 0 0 0.295E-12 0 0 0 0.295E-12'
[]
[]
[Variables]
[pressure]
initial_condition = -72620.4
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pressure
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pressure
gravity = '-10 0 0'
[]
[]
[AuxVariables]
[SWater]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[SWater]
type = MaterialStdVectorAux
property = PorousFlow_saturation_qp
index = 0
variable = SWater
[]
[]
[BCs]
[base]
type = PorousFlowSink
boundary = right
flux_function = -2.315E-3
variable = pressure
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu NONZERO 2 1E-10 1E-10 10'
[]
[]
[VectorPostprocessors]
[swater]
type = LineValueSampler
warn_discontinuous_face_values = false
variable = SWater
start_point = '0 0 0'
end_point = '6 0 0'
sort_by = x
num_points = 121
execute_on = timestep_end
[]
[]
[Executioner]
type = Transient
solve_type = Newton
petsc_options = '-snes_converged_reason'
end_time = 359424
[TimeStepper]
type = FunctionDT
function = dts
[]
[]
[Outputs]
file_base = rd01
[exodus]
type = Exodus
execute_on = 'initial final'
[]
[along_line]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/test/tests/actions/fullsat_brine_except6.i)
# Error checking: attempt to use non-standard time_unit with PorousFlowBrine
[Mesh]
type = GeneratedMesh
dim = 1
nx = 1
[]
[GlobalParams]
block = '0'
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[PorousFlowFullySaturated]
porepressure = pp
temperature = 273.15
mass_fraction_vars = nacl
fluid_properties_type = PorousFlowBrine
nacl_name = nacl
time_unit = days
dictator_name = dictator
stabilization = none
[]
[Variables]
[pp]
initial_condition = 20E6
[]
[nacl]
initial_condition = 0.1047
[]
[]
[Materials]
# Specific heat capacity
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 850
density = 2700
[]
# Permeability
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-13 0 0 0 1E-13 0 0 0 1E-13'
[]
# Porosity
[porosity]
type = PorousFlowPorosityConst
porosity = 0.3
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
(modules/porous_flow/test/tests/flux_limited_TVD_pflow/pffltvd_1D_adaptivity.i)
# Using flux-limited TVD advection ala Kuzmin and Turek, mploying PorousFlow Kernels and UserObjects, with superbee flux-limiter
# 1D version with adaptivity
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 1
[]
[Adaptivity]
initial_steps = 1
initial_marker = tracer_marker
marker = tracer_marker
max_h_level = 1
[Markers]
[tracer_marker]
type = ValueRangeMarker
variable = tracer
lower_bound = 0.02
upper_bound = 0.98
[]
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[porepressure]
[]
[tracer]
[]
[]
[ICs]
[porepressure]
type = FunctionIC
variable = porepressure
function = '1 - x'
[]
[tracer]
type = FunctionIC
variable = tracer
function = 'if(x<0.1,0,if(x>0.3,0,1))'
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = tracer
[]
[flux0]
type = PorousFlowFluxLimitedTVDAdvection
variable = tracer
advective_flux_calculator = advective_flux_calculator_0
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = porepressure
[]
[flux1]
type = PorousFlowFluxLimitedTVDAdvection
variable = porepressure
advective_flux_calculator = advective_flux_calculator_1
[]
[]
[BCs]
[constant_injection_porepressure]
type = DirichletBC
variable = porepressure
value = 1
boundary = left
[]
[no_tracer_on_left]
type = DirichletBC
variable = tracer
value = 0
boundary = left
[]
[remove_component_1]
type = PorousFlowPiecewiseLinearSink
variable = porepressure
boundary = right
fluid_phase = 0
pt_vals = '0 1E3'
multipliers = '0 1E3'
mass_fraction_component = 1
use_mobility = true
flux_function = 1E3
[]
[remove_component_0]
type = PorousFlowPiecewiseLinearSink
variable = tracer
boundary = right
fluid_phase = 0
pt_vals = '0 1E3'
multipliers = '0 1E3'
mass_fraction_component = 0
use_mobility = true
flux_function = 1E3
[]
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2E9
thermal_expansion = 0
viscosity = 1.0
density0 = 1000.0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure tracer'
number_fluid_phases = 1
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
[]
[advective_flux_calculator_0]
type = PorousFlowAdvectiveFluxCalculatorSaturatedMultiComponent
flux_limiter_type = superbee
fluid_component = 0
[]
[advective_flux_calculator_1]
type = PorousFlowAdvectiveFluxCalculatorSaturatedMultiComponent
flux_limiter_type = superbee
fluid_component = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = porepressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = tracer
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = the_simple_fluid
phase = 0
[]
[relperm]
type = PorousFlowRelativePermeabilityConst
phase = 0
[]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-2 0 0 0 1E-2 0 0 0 1E-2'
[]
[]
[Preconditioning]
active = basic
[basic]
type = SMP
full = true
petsc_options = '-ksp_diagonal_scale -ksp_diagonal_scale_fix'
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = ' asm lu NONZERO 2'
[]
[preferred_but_might_not_be_installed]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu mumps'
[]
[]
[VectorPostprocessors]
[tracer]
type = LineValueSampler
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 11
sort_by = x
variable = tracer
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 6
dt = 6E-2
nl_abs_tol = 1E-8
timestep_tolerance = 1E-3
[]
[Outputs]
[out]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/test/tests/sinks/s09_fully_saturated.i)
# Apply a piecewise-linear sink flux to the right-hand side and watch fluid flow to it
#
# This test has a single phase with two components. The test initialises with
# the porous material fully filled with component=1. The left-hand side is fixed
# at porepressure=1 and mass-fraction of the zeroth component being unity.
# The right-hand side has a very strong piecewise-linear flux that keeps the
# porepressure~0 at that side. Fluid mass is extracted by this flux in proportion
# to the fluid component mass fraction.
#
# Therefore, the zeroth fluid component will flow from left to right (down the
# pressure gradient).
#
# The important DE is
# porosity * dc/dt = (perm / visc) * grad(P) * grad(c)
# which is true for c = mass-fraction, and very large bulk modulus of the fluid.
# For grad(P) constant in time and space (as in this example) this is just the
# advection equation for c, with velocity = perm / visc / porosity. The parameters
# are chosen to velocity = 1 m/s.
# In the numerical world, and especially with full upwinding, the advection equation
# suffers from diffusion. In this example, the diffusion is obvious when plotting
# the mass-fraction along the line, but the average velocity of the front is still
# correct at 1 m/s.
# This test uses the FullySaturated version of the flow Kernel. This does not
# suffer from as much numerical diffusion as the standard PorousFlow Kernel since
# it does not employ any upwinding.
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
xmin = 0
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp frac'
number_fluid_phases = 1
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Variables]
[pp]
[]
[frac]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = 1-x
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = frac
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = pp
[]
[flux0]
type = PorousFlowFullySaturatedDarcyFlow
fluid_component = 0
gravity = '0 0 0'
variable = frac
[]
[flux1]
type = PorousFlowFullySaturatedDarcyFlow
fluid_component = 1
gravity = '0 0 0'
variable = pp
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1e10 # need large in order for constant-velocity advection
density0 = 1 # almost irrelevant, except that the ability of the right BC to keep P fixed at zero is related to density_P0
thermal_expansion = 0
viscosity = 11
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = frac
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.1 0 0 0 1.1 0 0 0 1.1'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2 # irrelevant in this fully-saturated situation
phase = 0
[]
[]
[BCs]
[lhs_fixed_a]
type = DirichletBC
boundary = 'left'
variable = frac
value = 1
[]
[lhs_fixed_b]
type = DirichletBC
boundary = 'left'
variable = pp
value = 1
[]
[flux0]
type = PorousFlowPiecewiseLinearSink
boundary = 'right'
pt_vals = '-100 100'
multipliers = '-1 1'
variable = frac # the zeroth comonent
mass_fraction_component = 0
use_mobility = false
use_relperm = false
fluid_phase = 0
flux_function = 1E4
[]
[flux1]
type = PorousFlowPiecewiseLinearSink
boundary = 'right'
pt_vals = '-100 100'
multipliers = '-1 1'
variable = pp # comonent 1
mass_fraction_component = 1
use_mobility = false
use_relperm = false
fluid_phase = 0
flux_function = 1E4
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_max_it -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu 10000 NONZERO 2'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E-2
end_time = 1
nl_rel_tol = 1E-11
nl_abs_tol = 1E-11
[]
[VectorPostprocessors]
[mf]
type = LineValueSampler
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 100
sort_by = x
variable = frac
[]
[]
[Outputs]
file_base = s09_fully_saturated
[console]
type = Console
execute_on = 'nonlinear linear'
[]
[csv]
type = CSV
sync_times = '0.1 0.5 1'
sync_only = true
[]
time_step_interval = 10
[]
(modules/porous_flow/test/tests/sinks/PorousFlowPiecewiseLinearSink_BC_eg1.i)
## This is an example input file showing how to set a Type I (Dirichlet) BC with PorousFlowPiecewiseLinearSink
##
## Problem setup:
## - The boundaries are set to P(x = 0) = 2e6 Pa, P(x = 1) = 1e6 and run to steady state.
## - The 2d domain is 1 m x 1 m
## - The permeability is set to 1E-15 m2, fluid viscosity = 1E-3 Pa-s
## - The steady state flux is calculated q = -k/mu*grad(P) = 1e-6 m/s
##
## Problem verification (in csv output):
## - The flux in and out of the domain are 1e-6 m/s (matching steady state solution)
## - The pressure at the left and right boundaries are set to 2e6 and 1e6 Pa, respectively
[Mesh]
type = GeneratedMesh
dim = 2
nx = 5
xmin = 0
xmax = 1
ny = 2
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[porepressure]
initial_condition = 1.5e6 # initial pressure in domain
[]
[]
[PorousFlowBasicTHM]
porepressure = porepressure
coupling_type = Hydro
gravity = '0 0 0'
fp = the_simple_fluid
[]
[AuxVariables]
[fluxes_out]
[]
[fluxes_in]
[]
[]
[BCs]
[in_left]
type = PorousFlowPiecewiseLinearSink
variable = porepressure
boundary = 'left'
pt_vals = '-1e9 1e9' # x coordinates defining g
multipliers = '-1e9 1e9' # y coordinates defining g
PT_shift = 2.E6 # BC pressure
flux_function = 1E-5 # Variable C
fluid_phase = 0
save_in = fluxes_out
[]
[out_right]
type = PorousFlowPiecewiseLinearSink
variable = porepressure
boundary = 'right'
pt_vals = '-1e9 1e9' # x coordinates defining g
multipliers = '-1e9 1e9' # y coordinates defining g
PT_shift = 1.E6 # BC pressure
flux_function = 1E-6 # Variable C
fluid_phase = 0
save_in = fluxes_in
[]
[]
[Postprocessors]
[left_flux]
type = NodalSum
boundary = 'left'
variable = fluxes_out
execute_on = 'timestep_end'
[]
[right_flux]
type = NodalSum
boundary = 'right'
variable = fluxes_in
execute_on = 'timestep_end'
[]
[left_pressure]
type = SideAverageValue
boundary = 'left'
variable = porepressure
execute_on = 'timestep_end'
[]
[right_pressure]
type = SideAverageValue
boundary = 'right'
variable = porepressure
execute_on = 'timestep_end'
[]
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
thermal_expansion = 0
viscosity = 1.0E-3
density0 = 1000.0
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[biot_modulus]
type = PorousFlowConstantBiotModulus
biot_coefficient = 0.8
solid_bulk_compliance = 2E-7
fluid_bulk_modulus = 1E7
[]
[permeability_aquifer]
type = PorousFlowPermeabilityConst
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-15'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1E6
dt = 1E5
nl_abs_tol = 1E-10
[]
[Outputs]
csv = true
[]
(modules/porous_flow/test/tests/fluidstate/brineco2_2.i)
# Injection of supercritical CO2 into a single brine saturated cell. The CO2 initially fully
# dissolves into the brine, increasing its density slightly. After a few time steps,
# the brine is saturated with CO2, and subsequently a supercritical gas phase of CO2 saturated
# with a small amount of H2O is formed. Salt is included as a nonlinear variable.
[Mesh]
type = GeneratedMesh
dim = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
temperature = 30
[]
[Variables]
[pgas]
initial_condition = 20e6
[]
[z]
[]
[xnacl]
initial_condition = 0.1
[]
[]
[DiracKernels]
[source]
type = PorousFlowSquarePulsePointSource
variable = z
point = '0.5 0.5 0'
mass_flux = 2
[]
[]
[BCs]
[left]
type = DirichletBC
value = 20e6
variable = pgas
boundary = left
[]
[right]
type = DirichletBC
value = 20e6
variable = pgas
boundary = right
[]
[]
[AuxVariables]
[pressure_gas]
order = CONSTANT
family = MONOMIAL
[]
[pressure_water]
order = CONSTANT
family = MONOMIAL
[]
[saturation_gas]
order = CONSTANT
family = MONOMIAL
[]
[saturation_water]
order = CONSTANT
family = MONOMIAL
[]
[density_water]
order = CONSTANT
family = MONOMIAL
[]
[density_gas]
order = CONSTANT
family = MONOMIAL
[]
[viscosity_water]
order = CONSTANT
family = MONOMIAL
[]
[viscosity_gas]
order = CONSTANT
family = MONOMIAL
[]
[x0_water]
order = CONSTANT
family = MONOMIAL
[]
[x0_gas]
order = CONSTANT
family = MONOMIAL
[]
[x1_water]
order = CONSTANT
family = MONOMIAL
[]
[x1_gas]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[pressure_water]
type = PorousFlowPropertyAux
variable = pressure_water
property = pressure
phase = 0
execute_on = 'initial timestep_end'
[]
[pressure_gas]
type = PorousFlowPropertyAux
variable = pressure_gas
property = pressure
phase = 1
execute_on = 'initial timestep_end'
[]
[saturation_water]
type = PorousFlowPropertyAux
variable = saturation_water
property = saturation
phase = 0
execute_on = 'initial timestep_end'
[]
[saturation_gas]
type = PorousFlowPropertyAux
variable = saturation_gas
property = saturation
phase = 1
execute_on = 'initial timestep_end'
[]
[density_water]
type = PorousFlowPropertyAux
variable = density_water
property = density
phase = 0
execute_on = 'initial timestep_end'
[]
[density_gas]
type = PorousFlowPropertyAux
variable = density_gas
property = density
phase = 1
execute_on = 'initial timestep_end'
[]
[viscosity_water]
type = PorousFlowPropertyAux
variable = viscosity_water
property = viscosity
phase = 0
execute_on = 'initial timestep_end'
[]
[viscosity_gas]
type = PorousFlowPropertyAux
variable = viscosity_gas
property = viscosity
phase = 1
execute_on = 'initial timestep_end'
[]
[x1_water]
type = PorousFlowPropertyAux
variable = x1_water
property = mass_fraction
phase = 0
fluid_component = 1
execute_on = 'initial timestep_end'
[]
[x1_gas]
type = PorousFlowPropertyAux
variable = x1_gas
property = mass_fraction
phase = 1
fluid_component = 1
execute_on = 'initial timestep_end'
[]
[x0_water]
type = PorousFlowPropertyAux
variable = x0_water
property = mass_fraction
phase = 0
fluid_component = 0
execute_on = 'initial timestep_end'
[]
[x0_gas]
type = PorousFlowPropertyAux
variable = x0_gas
property = mass_fraction
phase = 1
fluid_component = 0
execute_on = 'initial timestep_end'
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pgas
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = z
fluid_component = 1
[]
[mass2]
type = PorousFlowMassTimeDerivative
variable = xnacl
fluid_component = 2
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas z xnacl'
number_fluid_phases = 2
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[fs]
type = PorousFlowBrineCO2
brine_fp = brine
co2_fp = co2
capillary_pressure = pc
[]
[]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[brine]
type = BrineFluidProperties
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[brineco2]
type = PorousFlowFluidState
gas_porepressure = pgas
z = z
temperature_unit = Celsius
xnacl = xnacl
capillary_pressure = pc
fluid_state = fs
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1
end_time = 10
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
[density_water]
type = ElementIntegralVariablePostprocessor
variable = density_water
execute_on = 'initial timestep_end'
[]
[density_gas]
type = ElementIntegralVariablePostprocessor
variable = density_gas
execute_on = 'initial timestep_end'
[]
[viscosity_water]
type = ElementIntegralVariablePostprocessor
variable = viscosity_water
execute_on = 'initial timestep_end'
[]
[viscosity_gas]
type = ElementIntegralVariablePostprocessor
variable = viscosity_gas
execute_on = 'initial timestep_end'
[]
[x1_water]
type = ElementIntegralVariablePostprocessor
variable = x1_water
execute_on = 'initial timestep_end'
[]
[x0_water]
type = ElementIntegralVariablePostprocessor
variable = x0_water
execute_on = 'initial timestep_end'
[]
[x1_gas]
type = ElementIntegralVariablePostprocessor
variable = x1_gas
execute_on = 'initial timestep_end'
[]
[x0_gas]
type = ElementIntegralVariablePostprocessor
variable = x0_gas
execute_on = 'initial timestep_end'
[]
[sg]
type = ElementIntegralVariablePostprocessor
variable = saturation_gas
execute_on = 'initial timestep_end'
[]
[sw]
type = ElementIntegralVariablePostprocessor
variable = saturation_water
execute_on = 'initial timestep_end'
[]
[pwater]
type = ElementIntegralVariablePostprocessor
variable = pressure_water
execute_on = 'initial timestep_end'
[]
[pgas]
type = ElementIntegralVariablePostprocessor
variable = pressure_gas
execute_on = 'initial timestep_end'
[]
[xnacl]
type = ElementIntegralVariablePostprocessor
variable = xnacl
execute_on = 'initial timestep_end'
[]
[x0mass]
type = PorousFlowFluidMass
fluid_component = 0
phase = '0 1'
execute_on = 'initial timestep_end'
[]
[x1mass]
type = PorousFlowFluidMass
fluid_component = 1
phase = '0 1'
execute_on = 'initial timestep_end'
[]
[x2mass]
type = PorousFlowFluidMass
fluid_component = 2
phase = '0 1'
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
csv = true
file_base = brineco2_2
execute_on = 'initial timestep_end'
perf_graph = true
[]
(modules/porous_flow/test/tests/energy_conservation/heat03.i)
# The sample is a single unit element, with roller BCs on the sides
# and bottom. A constant displacement is applied to the top: disp_z = -0.01*t.
# There is no fluid flow or heat flow.
# Heat energy conservation is checked.
#
# Under these conditions (here L is the height of the sample: L=1 in this case):
# porepressure = porepressure(t=0) - (Fluid bulk modulus)*log(1 - 0.01*t)
# stress_xx = (bulk - 2*shear/3)*disp_z/L (remember this is effective stress)
# stress_zz = (bulk + 4*shear/3)*disp_z/L (remember this is effective stress)
# Also, the total heat energy must be conserved: this is
# fluid_mass * fluid_heat_cap * temperature + (1 - porosity) * rock_density * rock_heat_cap * temperature * volume
# Since fluid_mass is conserved, and volume = (1 - 0.01*t), this can be solved for temperature:
# temperature = initial_heat_energy / (fluid_mass * fluid_heat_cap + (1 - porosity) * rock_density * rock_heat_cap * (1 - 0.01*t))
#
# Parameters:
# Bulk modulus = 2
# Shear modulus = 1.5
# fluid bulk modulus = 0.5
# initial porepressure = 0.1
# initial temperature = 10
#
# Desired output:
# zdisp = -0.01*t
# p0 = 0.1 - 0.5*log(1-0.01*t)
# stress_xx = stress_yy = -0.01*t
# stress_zz = -0.04*t
# t0 = 11.5 / (0.159 + 0.99 * (1 - 0.01*t))
#
# Regarding the "log" - it comes from preserving fluid mass
#
# Note that the PorousFlowMassVolumetricExpansion and PorousFlowHeatVolumetricExpansion Kernels are used
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -0.5
xmax = 0.5
ymin = -0.5
ymax = 0.5
zmin = -0.5
zmax = 0.5
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
PorousFlowDictator = dictator
block = 0
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[pp]
initial_condition = 0.1
[]
[temp]
initial_condition = 10
[]
[]
[BCs]
[confinex]
type = DirichletBC
variable = disp_x
value = 0
boundary = 'left right'
[]
[confiney]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'bottom top'
[]
[basefixed]
type = DirichletBC
variable = disp_z
value = 0
boundary = back
[]
[top_velocity]
type = FunctionDirichletBC
variable = disp_z
function = -0.01*t
boundary = front
[]
[]
[Kernels]
[grad_stress_x]
type = StressDivergenceTensors
variable = disp_x
component = 0
[]
[grad_stress_y]
type = StressDivergenceTensors
variable = disp_y
component = 1
[]
[grad_stress_z]
type = StressDivergenceTensors
variable = disp_z
component = 2
[]
[poro_x]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
variable = disp_x
component = 0
[]
[poro_y]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
variable = disp_y
component = 1
[]
[poro_z]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
component = 2
variable = disp_z
[]
[poro_vol_exp]
type = PorousFlowMassVolumetricExpansion
variable = pp
fluid_component = 0
[]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[temp]
type = PorousFlowEnergyTimeDerivative
variable = temp
[]
[poro_vol_exp_temp]
type = PorousFlowHeatVolumetricExpansion
variable = temp
[]
[]
[AuxVariables]
[stress_xx]
order = CONSTANT
family = MONOMIAL
[]
[stress_xy]
order = CONSTANT
family = MONOMIAL
[]
[stress_xz]
order = CONSTANT
family = MONOMIAL
[]
[stress_yy]
order = CONSTANT
family = MONOMIAL
[]
[stress_yz]
order = CONSTANT
family = MONOMIAL
[]
[stress_zz]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
[]
[stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
[]
[stress_xz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xz
index_i = 0
index_j = 2
[]
[stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
[]
[stress_yz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yz
index_i = 1
index_j = 2
[]
[stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp pp disp_x disp_y disp_z'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 1
viscosity = 1
thermal_expansion = 0
cv = 1.3
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '1 1.5'
# bulk modulus is lambda + 2*mu/3 = 1 + 2*1.5/3 = 2
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 2.2
density = 0.5
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0.5 0 0 0 0.5 0 0 0 0.5'
[]
[]
[Postprocessors]
[p0]
type = PointValue
outputs = 'console csv'
execute_on = 'initial timestep_end'
point = '0 0 0'
variable = pp
[]
[t0]
type = PointValue
outputs = 'console csv'
execute_on = 'initial timestep_end'
point = '0 0 0'
variable = temp
[]
[zdisp]
type = PointValue
outputs = csv
point = '0 0 0.5'
use_displaced_mesh = false
variable = disp_z
[]
[stress_xx]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_xx
[]
[stress_yy]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_yy
[]
[stress_zz]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_zz
[]
[fluid_mass]
type = PorousFlowFluidMass
fluid_component = 0
execute_on = 'initial timestep_end'
outputs = 'console csv'
[]
[total_heat]
type = PorousFlowHeatEnergy
phase = 0
execute_on = 'initial timestep_end'
outputs = 'console csv'
[]
[rock_heat]
type = PorousFlowHeatEnergy
execute_on = 'initial timestep_end'
outputs = 'console csv'
[]
[fluid_heat]
type = PorousFlowHeatEnergy
include_porous_skeleton = false
phase = 0
execute_on = 'initial timestep_end'
outputs = 'console csv'
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-14 1E-8 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 2
end_time = 10
[]
[Outputs]
execute_on = 'initial timestep_end'
file_base = heat03
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/numerical_diffusion/pffltvd_action.i)
# Using flux-limited TVD advection ala Kuzmin and Turek, employing PorousFlow Kernels and UserObjects, with superbee flux-limiter
# Using the PorousFlowFullySaturated Action
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
xmin = 0
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[porepressure]
[]
[tracer]
[]
[]
[ICs]
[porepressure]
type = FunctionIC
variable = porepressure
function = '1 - x'
[]
[tracer]
type = FunctionIC
variable = tracer
function = 'if(x<0.1,0,if(x>0.3,0,1))'
[]
[]
[PorousFlowFullySaturated]
porepressure = porepressure
coupling_type = Hydro
fp = the_simple_fluid
mass_fraction_vars = tracer
stabilization = KT
flux_limiter_type = superbee
[]
[BCs]
[constant_injection_porepressure]
type = DirichletBC
variable = porepressure
value = 1
boundary = left
[]
[no_tracer_on_left]
type = DirichletBC
variable = tracer
value = 0
boundary = left
[]
[remove_component_1]
type = PorousFlowPiecewiseLinearSink
variable = porepressure
boundary = right
fluid_phase = 0
pt_vals = '0 1E3'
multipliers = '0 1E3'
mass_fraction_component = 1
use_mobility = true
flux_function = 1E3
[]
[remove_component_0]
type = PorousFlowPiecewiseLinearSink
variable = tracer
boundary = right
fluid_phase = 0
pt_vals = '0 1E3'
multipliers = '0 1E3'
mass_fraction_component = 0
use_mobility = true
flux_function = 1E3
[]
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2E9
thermal_expansion = 0
viscosity = 1.0
density0 = 1000.0
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-2 0 0 0 1E-2 0 0 0 1E-2'
[]
[]
[Preconditioning]
active = basic
[basic]
type = SMP
full = true
petsc_options = '-ksp_diagonal_scale -ksp_diagonal_scale_fix'
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = ' asm lu NONZERO 2'
[]
[preferred_but_might_not_be_installed]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu mumps'
[]
[]
[VectorPostprocessors]
[tracer]
type = LineValueSampler
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 101
sort_by = x
variable = tracer
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 6
dt = 6E-2
nl_abs_tol = 1E-8
timestep_tolerance = 1E-3
[]
[Outputs]
file_base = pffltvd_out
[out]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/test/tests/flux_limited_TVD_pflow/except04.i)
# Exception test: fe_order specified but not fe_family
[Mesh]
type = GeneratedMesh
dim = 1
[]
[GlobalParams]
gravity = '1 2 3'
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[tracer]
[]
[]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
[]
[]
[PorousFlowUnsaturated]
porepressure = pp
mass_fraction_vars = tracer
fp = the_simple_fluid
[]
[UserObjects]
[advective_flux_calculator]
type = PorousFlowAdvectiveFluxCalculatorSaturated
fe_order = First
[]
[]
[Materials]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[]
[Executioner]
type = Steady
solve_type = Newton
[]