- A_refReference area [m^2]
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Reference area [m^2]
- connectionsJunction connections
C++ Type:std::vector<BoundaryName>
Controllable:No
Description:Junction connections
- headPump head [m]
C++ Type:double
Unit:(no unit assumed)
Controllable:Yes
Description:Pump head [m]
- positionSpatial position of the center of the junction [m]
C++ Type:libMesh::Point
Controllable:No
Description:Spatial position of the center of the junction [m]
- volumeVolume of the junction [m^3]
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Volume of the junction [m^3]
Pump1Phase
Pump between two 1-phase flow channels that has a non-zero volume
This component implements a pump model for 1-phase flow that has a volume, which is directly supplied by the user. This component is heavily based off of VolumeJunction1Phase. The main difference is that there is only one momentum conservation equation (the ones for rhovV and rhowV were removed) since the pump inlet and outlet are aligned in the rhouV direction. Also there are new pump head terms added to the momentum and energy equations.
Input Parameters
- K0Form loss factor [-]
Default:0
C++ Type:double
Unit:(no unit assumed)
Controllable:Yes
Description:Form loss factor [-]
- apply_velocity_scalingFalseSet to true to apply the scaling to the normal velocity. See documentation for more information.
Default:False
C++ Type:bool
Controllable:No
Description:Set to true to apply the scaling to the normal velocity. See documentation for more information.
- initial_TInitial temperature [K]
C++ Type:FunctionName
Unit:(no unit assumed)
Controllable:No
Description:Initial temperature [K]
- initial_pInitial pressure [Pa]
C++ Type:FunctionName
Unit:(no unit assumed)
Controllable:No
Description:Initial pressure [Pa]
- initial_vel_xInitial velocity in x-direction [m/s]
C++ Type:FunctionName
Unit:(no unit assumed)
Controllable:No
Description:Initial velocity in x-direction [m/s]
- initial_vel_yInitial velocity in y-direction [m/s]
C++ Type:FunctionName
Unit:(no unit assumed)
Controllable:No
Description:Initial velocity in y-direction [m/s]
- initial_vel_zInitial velocity in z-direction [m/s]
C++ Type:FunctionName
Unit:(no unit assumed)
Controllable:No
Description:Initial velocity in z-direction [m/s]
- scaling_factor_rhoEV1Scaling factor for rho*E*V [-]
Default:1
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Scaling factor for rho*E*V [-]
- scaling_factor_rhoV1Scaling factor for rho*V [-]
Default:1
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Scaling factor for rho*V [-]
- scaling_factor_rhouV1Scaling factor for rho*u*V [-]
Default:1
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Scaling factor for rho*u*V [-]
- scaling_factor_rhovV1Scaling factor for rho*v*V [-]
Default:1
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Scaling factor for rho*v*V [-]
- scaling_factor_rhowV1Scaling factor for rho*w*V [-]
Default:1
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Scaling factor for rho*w*V [-]
Optional Parameters
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Controllable:No
Description:Set the enabled status of the MooseObject.
Advanced Parameters
Input Files
- (modules/thermal_hydraulics/test/tests/components/pump_1phase/pump_loop.i)
- (modules/thermal_hydraulics/tutorials/single_phase_flow/04_loop.i)
- (modules/thermal_hydraulics/test/tests/components/pump_1phase/clg.head.i)
- (modules/thermal_hydraulics/tutorials/single_phase_flow/05_secondary_side.i)
- (modules/thermal_hydraulics/test/tests/components/pump_1phase/pipe_friction_pump_head_balance.i)
- (modules/combined/test/tests/subchannel_thm_coupling/THM_SCM_coupling_pump.i)
- (modules/thermal_hydraulics/test/tests/components/pump_1phase/pump_mass_energy_conservation.i)
- (modules/thermal_hydraulics/test/tests/components/pump_1phase/jacobian.i)
- (modules/thermal_hydraulics/tutorials/single_phase_flow/06_custom_closures.i)
- (modules/thermal_hydraulics/test/tests/components/pump_1phase/pump_pressure_check.i)
References
No citations exist within this document.(modules/thermal_hydraulics/test/tests/components/pump_1phase/pump_loop.i)
[GlobalParams]
initial_T = 300
initial_p = 1e5
initial_vel = 0
initial_vel_x = 0
initial_vel_y = 0
initial_vel_z = 0
scaling_factor_1phase = '1 1 1'
scaling_factor_rhoV = 1
scaling_factor_rhouV = 1
scaling_factor_rhovV = 1
scaling_factor_rhowV = 1
scaling_factor_rhoEV = 1
closures = simple_closures
[]
[FluidProperties]
[fp]
type = StiffenedGasFluidProperties
gamma = 2.35
q = -1167e3
q_prime = 0
p_inf = 1.e9
cv = 1816
[]
[]
[Closures]
[simple_closures]
type = Closures1PhaseSimple
[]
[]
[Components]
[pipe1a]
type = FlowChannel1Phase
fp = fp
position = '0 0 0'
orientation = '1 0 0'
A = 0.785398163e-4 #1.0 cm (0.01 m) in diameter, A = 1/4 * PI * d^2
D_h = 0.01
f = 0.01
length = 0.5
n_elems = 2
[]
[pipe1b]
type = FlowChannel1Phase
fp = fp
position = '0.5 0 0'
orientation = '1 0 0'
A = 0.785398163e-4 #1.0 cm (0.01 m) in diameter, A = 1/4 * PI * d^2
D_h = 0.01
f = 0.01
length = 0.5
n_elems = 2
[]
[pipe2]
type = FlowChannel1Phase
fp = fp
position = '1 0 0'
orientation = '0 1 0'
A = 0.785398163e-4 #1.0 cm (0.01 m) in diameter, A = 1/4 * PI * d^2
D_h = 0.01
f = 0.01
length = 1
n_elems = 3
[]
[pipe3]
type = FlowChannel1Phase
fp = fp
position = '1 1 0'
orientation = '-1 0 0'
A = 0.785398163e-4 #1.0 cm (0.01 m) in diameter, A = 1/4 * PI * d^2
D_h = 0.01
f = 0.01
length = 1
n_elems = 3
[]
[pipe4]
type = FlowChannel1Phase
fp = fp
position = '0 1 0'
orientation = '0 -1 0'
A = 0.785398163e-4 #1.0 cm (0.01 m) in diameter, A = 1/4 * PI * d^2
D_h = 0.01
f = 0.01
length = 1
n_elems = 3
[]
[pipe5]
type = FlowChannel1Phase
fp = fp
position = '1 1 0'
orientation = '0 1 0'
A = 0.785398163e-4 #1.0 cm (0.01 m) in diameter, A = 1/4 * PI * d^2
D_h = 0.01
f = 0.01
length = 0.5
n_elems = 3
[]
[pump]
type = Pump1Phase
connections = 'pipe1a:out pipe1b:in'
head = 1.0
position = '0.5 0 0'
volume = 0.785398163e-3
A_ref = 0.785398163e-4
[]
[junction1]
type = VolumeJunction1Phase
connections = 'pipe1b:out pipe2:in'
volume = 0.785398163e-3
position = '1 0 0'
[]
[junction2]
type = VolumeJunction1Phase
connections = 'pipe2:out pipe3:in pipe5:in'
volume = 0.785398163e-3
position = '1 1 0'
[]
[junction3]
type = VolumeJunction1Phase
connections = 'pipe3:out pipe4:in'
volume = 0.785398163e-3
position = '0 1 0'
[]
[junction4]
type = VolumeJunction1Phase
connections = 'pipe4:out pipe1a:in'
volume = 0.785398163e-3
position = '0 0 0'
[]
[outlet]
type = InletStagnationPressureTemperature1Phase
input = 'pipe5:out'
p0 = 1.e5
T0 = 300
[]
[]
[Preconditioning]
[SMP_PJFNK]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
scheme = 'bdf2'
start_time = 0
num_steps = 10
dt = 1
abort_on_solve_fail = true
solve_type = 'PJFNK'
line_search = 'basic'
nl_rel_tol = 1e-6
nl_abs_tol = 1e-7
nl_max_its = 10
l_tol = 1e-3
l_max_its = 100
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
[Quadrature]
type = gauss
order = second
[]
[]
[Outputs]
[out]
type = Exodus
show = 'rhouA p'
execute_on = 'initial final'
[]
[]
(modules/thermal_hydraulics/tutorials/single_phase_flow/04_loop.i)
T_in = 300. # K
m_dot_in = 1e-2 # kg/s
press = 10e5 # Pa
# core parameters
core_length = 1. # m
core_n_elems = 25
core_dia = '${units 2. cm -> m}'
core_pitch = '${units 8.7 cm -> m}'
# pipe parameters
pipe_dia = '${units 10. cm -> m}'
A_pipe = '${fparse 0.25 * pi * pipe_dia^2}'
A_core = '${fparse core_pitch^2 - 0.25 *pi * core_dia^2}'
P_wet_core = '${fparse 4*core_pitch + pi * core_dia}'
Dh_core = '${fparse 4 * A_core / P_wet_core}'
tot_power = 2000 # W
[GlobalParams]
initial_p = ${press}
initial_vel = 0.0001
initial_T = ${T_in}
initial_vel_x = 0
initial_vel_y = 0
initial_vel_z = 0
gravity_vector = '0 0 0'
rdg_slope_reconstruction = minmod
scaling_factor_1phase = '1 1e-2 1e-4'
scaling_factor_rhoV = 1
scaling_factor_rhouV = 1e-2
scaling_factor_rhovV = 1e-2
scaling_factor_rhowV = 1e-2
scaling_factor_rhoEV = 1e-4
closures = simple_closures
fp = he
[]
[FluidProperties]
[he]
type = IdealGasFluidProperties
molar_mass = 4e-3
gamma = 1.67
k = 0.2556
mu = 3.22639e-5
[]
[]
[Closures]
[simple_closures]
type = Closures1PhaseTHM
[]
[]
[SolidProperties]
[steel]
type = ThermalFunctionSolidProperties
rho = 8050
k = 45
cp = 466
[]
[]
[Components]
[total_power]
type = TotalPower
power = ${tot_power}
[]
[up_pipe_1]
type = FlowChannel1Phase
position = '0 0 0'
orientation = '0 0 1'
length = 0.5
n_elems = 15
A = ${A_pipe}
D_h = ${pipe_dia}
[]
[jct1]
type = JunctionParallelChannels1Phase
position = '0 0 0.5'
connections = 'up_pipe_1:out core_chan:in'
volume = 1e-5
[]
[core_chan]
type = FlowChannel1Phase
position = '0 0 0.5'
orientation = '0 0 1'
length = ${core_length}
n_elems = ${core_n_elems}
roughness = .0001
A = '${A_core}'
D_h = ${Dh_core}
[]
[core_hs]
type = HeatStructureCylindrical
position = '0 0 0.5'
orientation = '0 0 1'
length = ${core_length}
n_elems = ${core_n_elems}
names = 'block'
widths = '${fparse core_dia / 2.}'
solid_properties = 'steel'
solid_properties_T_ref = '300'
n_part_elems = 3
[]
[core_heating]
type = HeatSourceFromTotalPower
hs = core_hs
regions = block
power = total_power
[]
[core_ht]
type = HeatTransferFromHeatStructure1Phase
flow_channel = core_chan
hs = core_hs
hs_side = outer
P_hf = '${fparse pi * core_dia}'
[]
[jct2]
type = JunctionParallelChannels1Phase
position = '0 0 1.5'
connections = 'core_chan:out up_pipe_2:in'
volume = 1e-5
[]
[up_pipe_2]
type = FlowChannel1Phase
position = '0 0 1.5'
orientation = '0 0 1'
length = 0.5
n_elems = 10
A = ${A_pipe}
D_h = ${pipe_dia}
[]
[jct3]
type = JunctionOneToOne1Phase
connections = 'up_pipe_2:out top_pipe_1:in'
[]
[top_pipe_1]
type = FlowChannel1Phase
position = '0 0 2'
orientation = '1 0 0'
length = 0.5
n_elems = 10
A = ${A_pipe}
D_h = ${pipe_dia}
[]
[top_pipe_2]
type = FlowChannel1Phase
position = '0.5 0 2'
orientation = '1 0 0'
length = 0.5
n_elems = 10
A = ${A_pipe}
D_h = ${pipe_dia}
[]
[jct4]
type = VolumeJunction1Phase
position = '0.5 0 2'
volume = 1e-5
connections = 'top_pipe_1:out top_pipe_2:in press_pipe:in'
[]
[press_pipe]
type = FlowChannel1Phase
position = '0.5 0 2'
orientation = '0 0 1'
length = 0.2
n_elems = 5
A = ${A_pipe}
D_h = ${pipe_dia}
[]
[pressurizer]
type = InletStagnationPressureTemperature1Phase
p0 = ${press}
T0 = ${T_in}
input = press_pipe:out
[]
[jct5]
type = JunctionOneToOne1Phase
connections = 'top_pipe_2:out down_pipe_1:in'
[]
[down_pipe_1]
type = FlowChannel1Phase
position = '1 0 2'
orientation = '0 0 -1'
length = 0.25
A = ${A_pipe}
n_elems = 5
[]
[jct6]
type = JunctionOneToOne1Phase
connections = 'down_pipe_1:out cooling_pipe:in'
[]
[cooling_pipe]
type = FlowChannel1Phase
position = '1 0 1.75'
orientation = '0 0 -1'
length = 1.5
n_elems = 25
A = ${A_pipe}
[]
[cold_wall]
type = HeatTransferFromSpecifiedTemperature1Phase
flow_channel = cooling_pipe
T_wall = 300
P_hf = '${fparse pi * pipe_dia}'
[]
[jct7]
type = JunctionOneToOne1Phase
connections = 'cooling_pipe:out down_pipe_2:in'
[]
[down_pipe_2]
type = FlowChannel1Phase
position = '1 0 0.25'
orientation = '0 0 -1'
length = 0.25
n_elems = 10
A = ${A_pipe}
D_h = ${pipe_dia}
[]
[jct8]
type = JunctionOneToOne1Phase
connections = 'down_pipe_2:out bottom_1:in'
[]
[bottom_1]
type = FlowChannel1Phase
position = '1 0 0'
orientation = '-1 0 0'
length = 0.5
n_elems = 5
A = ${A_pipe}
D_h = ${pipe_dia}
[]
[pump]
type = Pump1Phase
position = '0.5 0 0'
connections = 'bottom_1:out bottom_2:in'
volume = 1e-4
A_ref = ${A_pipe}
head = 0
[]
[bottom_2]
type = FlowChannel1Phase
position = '0.5 0 0'
orientation = '-1 0 0'
length = 0.5
n_elems = 5
A = ${A_pipe}
D_h = ${pipe_dia}
[]
[jct10]
type = JunctionOneToOne1Phase
connections = 'bottom_2:out up_pipe_1:in'
[]
[]
[ControlLogic]
[set_point]
type = GetFunctionValueControl
function = ${m_dot_in}
[]
[pid]
type = PIDControl
initial_value = 0
set_point = set_point:value
input = m_dot_pump
K_p = 1.
K_i = 4.
K_d = 0
[]
[set_pump_head]
type = SetComponentRealValueControl
component = pump
parameter = head
value = pid:output
[]
[]
[Postprocessors]
[power_to_coolant]
type = ADHeatRateConvection1Phase
block = core_chan
P_hf = '${fparse pi *core_dia}'
[]
[m_dot_pump]
type = ADFlowJunctionFlux1Phase
boundary = core_chan:in
connection_index = 1
equation = mass
junction = jct7
[]
[core_T_out]
type = SideAverageValue
boundary = core_chan:out
variable = T
[]
[core_p_in]
type = SideAverageValue
boundary = core_chan:in
variable = p
[]
[core_p_out]
type = SideAverageValue
boundary = core_chan:out
variable = p
[]
[core_delta_p]
type = ParsedPostprocessor
pp_names = 'core_p_in core_p_out'
expression = 'core_p_in - core_p_out'
[]
[hx_pri_T_out]
type = SideAverageValue
boundary = cooling_pipe:out
variable = T
[]
[pump_head]
type = RealComponentParameterValuePostprocessor
component = pump
parameter = head
[]
[]
[Preconditioning]
[pc]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
start_time = 0
[TimeStepper]
type = IterationAdaptiveDT
dt = 1
[]
dtmax = 5
end_time = 500
line_search = basic
solve_type = NEWTON
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
nl_rel_tol = 0
nl_abs_tol = 1e-8
nl_max_its = 25
[]
[Outputs]
exodus = true
[console]
type = Console
max_rows = 1
outlier_variable_norms = false
[]
print_linear_residuals = false
[]
(modules/thermal_hydraulics/test/tests/components/pump_1phase/clg.head.i)
[GlobalParams]
initial_T = 393.15
initial_vel = 0.0372
f = 0
fp = fp
scaling_factor_1phase = '1e-2 1e-2 1e-5'
closures = simple_closures
[]
[FluidProperties]
[fp]
type = StiffenedGasFluidProperties
gamma = 2.35
q = -1167e3
q_prime = 0
p_inf = 1.e9
cv = 1816
[]
[]
[Closures]
[simple_closures]
type = Closures1PhaseSimple
[]
[]
[Functions]
[pump_head_fn]
type = PiecewiseLinear
x = '0 0.5'
y = '0 1 '
[]
[]
[Components]
[inlet]
type = InletMassFlowRateTemperature1Phase
input = 'pipe1:in'
m_dot = 20
T = 393.15
[]
[pipe1]
type = FlowChannel1Phase
position = '0 0 0'
orientation = '1 0 0'
length = 1
n_elems = 10
A = 0.567
initial_p = 1.318964e+07
[]
[pump]
type = Pump1Phase
connections = 'pipe1:out pipe2:in'
position = '1.02 0 0'
head = 0
volume = 0.567
A_ref = 0.567
initial_p = 1.318964e+07
initial_vel_x = 0.0372
initial_vel_y = 0
initial_vel_z = 0
scaling_factor_rhoV = 1
scaling_factor_rhouV = 1
scaling_factor_rhoEV = 1e-5
[]
[pipe2]
type = FlowChannel1Phase
position = '1.04 0 0'
orientation = '1 0 0'
length = 0.96
n_elems = 10
A = 0.567
initial_p = 1.4072e+07
[]
[outlet]
type = Outlet1Phase
input = 'pipe2:out'
p = 1.4072e+07
[]
[]
[ControlLogic]
[pump_head_ctrl]
type = TimeFunctionComponentControl
component = pump
parameter = head
function = pump_head_fn
[]
[]
[Postprocessors]
[pump_head]
type = RealComponentParameterValuePostprocessor
component = pump
parameter = head
[]
[]
[Preconditioning]
[pc]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
scheme = 'bdf2'
start_time = 0
dt = 0.1
num_steps = 10
abort_on_solve_fail = true
solve_type = 'PJFNK'
line_search = 'basic'
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
nl_rel_tol = 1e-8
nl_abs_tol = 1e-6
nl_max_its = 15
l_tol = 1e-4
l_max_its = 10
[Quadrature]
type = GAUSS
order = SECOND
[]
[]
[Outputs]
[out]
type = CSV
show = 'pump_head'
[]
print_linear_residuals = false
[]
(modules/thermal_hydraulics/tutorials/single_phase_flow/05_secondary_side.i)
T_in = 300. # K
m_dot_in = 1e-2 # kg/s
press = 10e5 # Pa
# core parameters
core_length = 1. # m
core_n_elems = 25
core_dia = '${units 2. cm -> m}'
core_pitch = '${units 8.7 cm -> m}'
A_core = '${fparse core_pitch^2 - 0.25 *pi * core_dia^2}'
P_wet_core = '${fparse 4*core_pitch + pi * core_dia}'
Dh_core = '${fparse 4 * A_core / P_wet_core}'
# pipe parameters
pipe_dia = '${units 10. cm -> m}'
A_pipe = '${fparse 0.25 * pi * pipe_dia^2}'
tot_power = 2000 # W
# heat exchanger parameters
hx_dia_inner = '${units 12. cm -> m}'
hx_wall_thickness = '${units 5. mm -> m}'
hx_dia_outer = '${units 50. cm -> m}'
hx_radius_wall = '${fparse hx_dia_inner / 2. + hx_wall_thickness}'
hx_length = 1.5 # m
hx_n_elems = 25
m_dot_sec_in = 1. # kg/s
[GlobalParams]
initial_p = ${press}
initial_vel = 0.0001
initial_T = ${T_in}
initial_vel_x = 0
initial_vel_y = 0
initial_vel_z = 0
gravity_vector = '0 0 0'
rdg_slope_reconstruction = minmod
scaling_factor_1phase = '1 1e-2 1e-4'
scaling_factor_rhoV = 1
scaling_factor_rhouV = 1e-2
scaling_factor_rhovV = 1e-2
scaling_factor_rhowV = 1e-2
scaling_factor_rhoEV = 1e-4
closures = thm_closures
fp = he
[]
[Functions]
[m_dot_sec_fn]
type = PiecewiseLinear
xy_data = '
0 0
10 ${m_dot_sec_in}'
[]
[]
[FluidProperties]
[he]
type = IdealGasFluidProperties
molar_mass = 4e-3
gamma = 1.67
k = 0.2556
mu = 3.22639e-5
[]
[water]
type = StiffenedGasFluidProperties
gamma = 2.35
cv = 1816.0
q = -1.167e6
p_inf = 1.0e9
q_prime = 0
[]
[]
[Closures]
[thm_closures]
type = Closures1PhaseTHM
[]
[]
[SolidProperties]
[steel]
type = ThermalFunctionSolidProperties
rho = 8050
k = 45
cp = 466
[]
[]
[Components]
[total_power]
type = TotalPower
power = ${tot_power}
[]
[up_pipe_1]
type = FlowChannel1Phase
position = '0 0 0'
orientation = '0 0 1'
length = 0.5
n_elems = 15
A = ${A_pipe}
D_h = ${pipe_dia}
[]
[jct1]
type = JunctionParallelChannels1Phase
position = '0 0 0.5'
connections = 'up_pipe_1:out core_chan:in'
volume = 1e-5
[]
[core_chan]
type = FlowChannel1Phase
position = '0 0 0.5'
orientation = '0 0 1'
length = ${core_length}
n_elems = ${core_n_elems}
roughness = .0001
A = ${A_core}
D_h = ${Dh_core}
[]
[core_hs]
type = HeatStructureCylindrical
position = '0 0 0.5'
orientation = '0 0 1'
length = ${core_length}
n_elems = ${core_n_elems}
names = 'block'
widths = '${fparse core_dia / 2.}'
solid_properties = 'steel'
solid_properties_T_ref = '300'
n_part_elems = 3
[]
[core_heating]
type = HeatSourceFromTotalPower
hs = core_hs
regions = block
power = total_power
[]
[core_ht]
type = HeatTransferFromHeatStructure1Phase
flow_channel = core_chan
hs = core_hs
hs_side = outer
P_hf = '${fparse pi * core_dia}'
[]
[jct2]
type = JunctionParallelChannels1Phase
position = '0 0 1.5'
connections = 'core_chan:out up_pipe_2:in'
volume = 1e-5
[]
[up_pipe_2]
type = FlowChannel1Phase
position = '0 0 1.5'
orientation = '0 0 1'
length = 0.5
n_elems = 10
A = ${A_pipe}
D_h = ${pipe_dia}
[]
[jct3]
type = JunctionOneToOne1Phase
connections = 'up_pipe_2:out top_pipe_1:in'
[]
[top_pipe_1]
type = FlowChannel1Phase
position = '0 0 2'
orientation = '1 0 0'
length = 0.5
n_elems = 10
A = ${A_pipe}
D_h = ${pipe_dia}
[]
[top_pipe_2]
type = FlowChannel1Phase
position = '0.5 0 2'
orientation = '1 0 0'
length = 0.5
n_elems = 10
A = ${A_pipe}
D_h = ${pipe_dia}
[]
[jct4]
type = VolumeJunction1Phase
position = '0.5 0 2'
volume = 1e-5
connections = 'top_pipe_1:out top_pipe_2:in press_pipe:in'
[]
[press_pipe]
type = FlowChannel1Phase
position = '0.5 0 2'
orientation = '0 1 0'
length = 0.2
n_elems = 5
A = ${A_pipe}
D_h = ${pipe_dia}
[]
[pressurizer]
type = InletStagnationPressureTemperature1Phase
p0 = ${press}
T0 = ${T_in}
input = press_pipe:out
[]
[jct5]
type = JunctionOneToOne1Phase
connections = 'top_pipe_2:out down_pipe_1:in'
[]
[down_pipe_1]
type = FlowChannel1Phase
position = '1 0 2'
orientation = '0 0 -1'
length = 0.25
A = ${A_pipe}
n_elems = 5
[]
[jct6]
type = JunctionParallelChannels1Phase
position = '1 0 1.75'
connections = 'down_pipe_1:out hx/pri:in'
volume = 1e-5
[]
[hx]
[pri]
type = FlowChannel1Phase
position = '1 0 1.75'
orientation = '0 0 -1'
length = ${hx_length}
n_elems = ${hx_n_elems}
roughness = 1e-5
A = '${fparse pi * hx_dia_inner * hx_dia_inner / 4.}'
D_h = ${hx_dia_inner}
[]
[ht_pri]
type = HeatTransferFromHeatStructure1Phase
hs = hx/wall
hs_side = inner
flow_channel = hx/pri
P_hf = '${fparse pi * hx_dia_inner}'
[]
[wall]
type = HeatStructureCylindrical
position = '1 0 1.75'
orientation = '0 0 -1'
length = ${hx_length}
n_elems = ${hx_n_elems}
widths = '${hx_wall_thickness}'
n_part_elems = '3'
solid_properties = 'steel'
solid_properties_T_ref = '300'
names = '0'
inner_radius = '${fparse hx_dia_inner / 2.}'
[]
[ht_sec]
type = HeatTransferFromHeatStructure1Phase
hs = hx/wall
hs_side = outer
flow_channel = hx/sec
P_hf = '${fparse 2 * pi * hx_radius_wall}'
[]
[sec]
type = FlowChannel1Phase
position = '${fparse 1 + hx_wall_thickness} 0 0.25'
orientation = '0 0 1'
length = ${hx_length}
n_elems = ${hx_n_elems}
A = '${fparse pi * (hx_dia_outer * hx_dia_outer / 4. - hx_radius_wall * hx_radius_wall)}'
D_h = '${fparse hx_dia_outer - (2 * hx_radius_wall)}'
fp = water
initial_T = 300
[]
[]
[jct7]
type = JunctionParallelChannels1Phase
position = '1 0 0.5'
connections = 'hx/pri:out down_pipe_2:in'
volume = 1e-5
[]
[down_pipe_2]
type = FlowChannel1Phase
position = '1 0 0.25'
orientation = '0 0 -1'
length = 0.25
n_elems = 10
A = ${A_pipe}
D_h = ${pipe_dia}
[]
[jct8]
type = JunctionOneToOne1Phase
connections = 'down_pipe_2:out bottom_1:in'
[]
[bottom_1]
type = FlowChannel1Phase
position = '1 0 0'
orientation = '-1 0 0'
length = 0.5
n_elems = 5
A = ${A_pipe}
D_h = ${pipe_dia}
[]
[pump]
type = Pump1Phase
position = '0.5 0 0'
connections = 'bottom_1:out bottom_2:in'
volume = 1e-4
A_ref = ${A_pipe}
head = 0
[]
[bottom_2]
type = FlowChannel1Phase
position = '0.5 0 0'
orientation = '-1 0 0'
length = 0.5
n_elems = 5
A = ${A_pipe}
D_h = ${pipe_dia}
[]
[jct9]
type = JunctionOneToOne1Phase
connections = 'bottom_2:out up_pipe_1:in'
[]
[inlet_sec]
type = InletMassFlowRateTemperature1Phase
input = 'hx/sec:in'
m_dot = 0
T = 300
[]
[outlet_sec]
type = Outlet1Phase
input = 'hx/sec:out'
p = 1e5
[]
[]
[ControlLogic]
[set_point]
type = GetFunctionValueControl
function = ${m_dot_in}
[]
[pid]
type = PIDControl
initial_value = 0.0
set_point = set_point:value
input = m_dot_pump
K_p = 1.
K_i = 4.
K_d = 0
[]
[set_pump_head]
type = SetComponentRealValueControl
component = pump
parameter = head
value = pid:output
[]
[m_dot_sec_inlet_ctrl]
type = GetFunctionValueControl
function = m_dot_sec_fn
[]
[set_m_dot_sec_ctrl]
type = SetComponentRealValueControl
component = inlet_sec
parameter = m_dot
value = m_dot_sec_inlet_ctrl:value
[]
[]
[Postprocessors]
[power_to_coolant]
type = ADHeatRateConvection1Phase
block = core_chan
P_hf = '${fparse pi *core_dia}'
[]
[m_dot_pump]
type = ADFlowJunctionFlux1Phase
boundary = core_chan:in
connection_index = 1
equation = mass
junction = jct7
[]
[core_T_out]
type = SideAverageValue
boundary = core_chan:out
variable = T
[]
[core_p_in]
type = SideAverageValue
boundary = core_chan:in
variable = p
[]
[core_p_out]
type = SideAverageValue
boundary = core_chan:out
variable = p
[]
[core_delta_p]
type = ParsedPostprocessor
pp_names = 'core_p_in core_p_out'
expression = 'core_p_in - core_p_out'
[]
[hx_pri_T_out]
type = SideAverageValue
boundary = hx/pri:out
variable = T
[]
[hx_sec_T_in]
type = SideAverageValue
boundary = inlet_sec
variable = T
[]
[hx_sec_T_out]
type = SideAverageValue
boundary = outlet_sec
variable = T
[]
[m_dot_sec]
type = ADFlowBoundaryFlux1Phase
boundary = inlet_sec
equation = mass
[]
[]
[Preconditioning]
[pc]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
start_time = 0
[TimeStepper]
type = IterationAdaptiveDT
dt = 1
[]
dtmax = 5
end_time = 500
line_search = basic
solve_type = NEWTON
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
nl_rel_tol = 0
nl_abs_tol = 1e-8
nl_max_its = 25
[]
[Outputs]
exodus = true
[console]
type = Console
max_rows = 1
outlier_variable_norms = false
[]
print_linear_residuals = false
[]
(modules/thermal_hydraulics/test/tests/components/pump_1phase/pipe_friction_pump_head_balance.i)
# This test balances the pipe friction pressure drop with the pump head pressure rise and runs to steady state.
[GlobalParams]
initial_T = 393.15
initial_vel = 0.0
A = 0.567
fp = fp
scaling_factor_1phase = '0.04 0.04 0.04e-5'
closures = simple_closures
[]
[FluidProperties]
[fp]
type = StiffenedGasFluidProperties
gamma = 2.35
q = -1167e3
q_prime = 0
p_inf = 1.e9
cv = 1816
[]
[]
[Closures]
[simple_closures]
type = Closures1PhaseSimple
[]
[]
[Components]
[pipe1]
type = FlowChannel1Phase
position = '0 0 0'
orientation = '1 0 0'
length = 10
initial_p = 1.35e+07
n_elems = 20
f = 5000
gravity_vector = '0 0 0'
[]
[pump]
type = Pump1Phase
connections = 'pipe1:out pipe1:in'
position = '1.02 0 0'
initial_p = 1.3e+07
initial_vel_x = 1
initial_vel_y = 0
initial_vel_z = 0
scaling_factor_rhoV = 1
scaling_factor_rhouV = 1
scaling_factor_rhoEV = 1e-5
head = 8
volume = 0.567
A_ref = 0.567
[]
[]
[Preconditioning]
[pc]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
scheme = 'bdf2'
start_time = 0
dt = 1.e-3
num_steps = 38
abort_on_solve_fail = true
solve_type = 'PJFNK'
line_search = 'basic'
nl_rel_tol = 1e-8
nl_abs_tol = 1e-6
nl_max_its = 15
l_tol = 1e-4
l_max_its = 10
[Quadrature]
type = GAUSS
order = SECOND
[]
[]
[Outputs]
[out_x]
type = Exodus
show = 'p T vel'
[]
velocity_as_vector = false
[]
(modules/combined/test/tests/subchannel_thm_coupling/THM_SCM_coupling_pump.i)
# THM file based on https://mooseframework.inl.gov/modules/thermal_hydraulics/tutorials/single_phase_flow/step05.html
# Used to loosely couple THM with SCM
# This is a simple closed loop with a pump providing pressure head, core, pressurizer and HX.
# THM sends massflux and temperature at the inlet of the core, and pressure at the outlet of the core
# to subchannel. Subchannel returns total pressure drop of the assembly and total power to THM and THM calculates an
# average friction factor for the core region.
T_in = 583.0 # K
press = 2e5 # Pa
SC_core = 0.0004980799633447909 #m2
# core parameters
core_length = 1. # m
core_n_elems = 1
A_core = 0.005 #dummy
# pipe parameters
pipe_dia = '${units 10. cm -> m}'
A_pipe = '${fparse 0.25 * pi * pipe_dia^2}'
# heat exchanger parameters
hx_dia_inner = '${units 12. cm -> m}'
hx_wall_thickness = '${units 5. mm -> m}'
hx_dia_outer = '${units 50. cm -> m}'
hx_radius_wall = '${fparse hx_dia_inner / 2. + hx_wall_thickness}'
hx_length = 1.5 # m
hx_n_elems = 25
m_dot_sec_in = 1. # kg/s
[GlobalParams]
initial_p = ${press}
initial_vel = 0.0001
initial_T = ${T_in}
initial_vel_x = 0
initial_vel_y = 0
initial_vel_z = 0
gravity_vector = '0 0 0'
rdg_slope_reconstruction = minmod
scaling_factor_1phase = '1 1e-2 1e-4'
scaling_factor_rhoV = 1
scaling_factor_rhouV = 1e-2
scaling_factor_rhovV = 1e-2
scaling_factor_rhowV = 1e-2
scaling_factor_rhoEV = 1e-4
closures = thm_closures
fp = sodium_eos
[]
[Functions]
[q_wall_fn]
type = ParsedFunction
symbol_names = 'core_power length'
symbol_values = 'core_power ${core_length}'
expression = 'core_power/length'
[]
[]
[FluidProperties]
[water]
type = StiffenedGasFluidProperties
gamma = 2.35
cv = 1816.0
q = -1.167e6
p_inf = 1.0e9
q_prime = 0
[]
[sodium_eos]
type = StiffenedGasFluidProperties
gamma = 1.24
cv = 1052.8
q = -2.6292e+05
p_inf = 1.1564e+08
q_prime = 0
mu = 3.222e-04
k = 73.82
[]
[]
[Closures]
[thm_closures]
type = Closures1PhaseTHM
[]
[none_closures]
type = Closures1PhaseNone
[]
[]
[Materials]
[f_mat]
type = ADParsedMaterial
property_name = f_D
postprocessor_names = 'core_f'
expression = 'core_f'
block = 'core_chan'
[]
[]
[HeatStructureMaterials]
[steel]
type = SolidMaterialProperties
rho = 8050
k = 45
cp = 466
[]
[]
[Components]
[up_pipe_1]
type = FlowChannel1Phase
position = '0 0 -0.5'
orientation = '0 0 1'
length = 0.5
n_elems = 15
A = ${A_pipe}
D_h = ${pipe_dia}
[]
[jct1]
type = JunctionParallelChannels1Phase
position = '0 0 0'
connections = 'up_pipe_1:out core_chan:in'
volume = 1e-5
[]
[core_chan]
type = FlowChannel1Phase
position = '0 0 0'
orientation = '0 0 1'
length = ${core_length}
n_elems = ${core_n_elems}
A = ${A_core}
closures = none_closures
[]
[core_ht]
type = HeatTransferFromHeatFlux1Phase
flow_channel = core_chan
q_wall = q_wall_fn
P_hf = 1
[]
[jct2]
type = JunctionParallelChannels1Phase
position = '0 0 1'
connections = 'core_chan:out up_pipe_2:in'
volume = 1e-5
[]
[up_pipe_2]
type = FlowChannel1Phase
position = '0 0 1'
orientation = '0 0 1'
length = 0.5
n_elems = 10
A = ${A_pipe}
D_h = ${pipe_dia}
[]
[jct3]
type = JunctionOneToOne1Phase
connections = 'up_pipe_2:out top_pipe_1:in'
[]
[top_pipe_1]
type = FlowChannel1Phase
position = '0 0 1.5'
orientation = '1 0 0'
length = 0.5
n_elems = 10
A = ${A_pipe}
D_h = ${pipe_dia}
[]
[top_pipe_2]
type = FlowChannel1Phase
position = '0.5 0 1.5'
orientation = '1 0 0'
length = 0.5
n_elems = 10
A = ${A_pipe}
D_h = ${pipe_dia}
[]
[jct4]
type = VolumeJunction1Phase
position = '0.5 0 1.5'
volume = 1e-5
connections = 'top_pipe_1:out top_pipe_2:in press_pipe:in'
[]
[press_pipe]
type = FlowChannel1Phase
position = '0.5 0 1.5'
orientation = '0 1 0'
length = 0.2
n_elems = 5
A = ${A_pipe}
D_h = ${pipe_dia}
[]
[pressurizer]
type = InletStagnationPressureTemperature1Phase
p0 = ${press}
T0 = 580
input = press_pipe:out
[]
[jct5]
type = JunctionOneToOne1Phase
connections = 'top_pipe_2:out down_pipe_1:in'
[]
[down_pipe_1]
type = FlowChannel1Phase
position = '1 0 1.5'
orientation = '0 0 -1'
length = 0.25
A = ${A_pipe}
n_elems = 5
[]
[jct6]
type = JunctionParallelChannels1Phase
position = '1 0 1.25'
connections = 'down_pipe_1:out hx/pri:in'
volume = 1e-5
[]
[hx]
[pri]
type = FlowChannel1Phase
position = '1 0 1.25'
orientation = '0 0 -1'
length = ${hx_length}
n_elems = ${hx_n_elems}
roughness = 1e-5
A = '${fparse pi * hx_dia_inner * hx_dia_inner / 4.}'
D_h = ${hx_dia_inner}
[]
[ht_pri]
type = HeatTransferFromHeatStructure1Phase
hs = hx/wall
hs_side = inner
flow_channel = hx/pri
P_hf = '${fparse pi * hx_dia_inner}'
[]
[wall]
type = HeatStructureCylindrical
position = '1 0 1.25'
orientation = '0 0 -1'
length = ${hx_length}
n_elems = ${hx_n_elems}
widths = '${hx_wall_thickness}'
n_part_elems = '3'
materials = 'steel'
names = '0'
inner_radius = '${fparse hx_dia_inner / 2.}'
[]
[ht_sec]
type = HeatTransferFromHeatStructure1Phase
hs = hx/wall
hs_side = outer
flow_channel = hx/sec
P_hf = '${fparse 2 * pi * hx_radius_wall}'
[]
[sec]
type = FlowChannel1Phase
position = '${fparse 1 + hx_wall_thickness} 0 -0.25'
orientation = '0 0 1'
length = ${hx_length}
n_elems = ${hx_n_elems}
A = '${fparse pi * (hx_dia_outer * hx_dia_outer / 4. - hx_radius_wall * hx_radius_wall)}'
D_h = '${fparse hx_dia_outer - (2 * hx_radius_wall)}'
fp = water
initial_T = 300
[]
[]
[jct7]
type = JunctionParallelChannels1Phase
position = '1 0 -0.25'
connections = 'hx/pri:out down_pipe_2:in'
volume = 1e-5
[]
[down_pipe_2]
type = FlowChannel1Phase
position = '1 0 -0.25'
orientation = '0 0 -1'
length = 0.25
n_elems = 10
A = ${A_pipe}
D_h = ${pipe_dia}
[]
[jct8]
type = JunctionOneToOne1Phase
connections = 'down_pipe_2:out bottom_1:in'
[]
[bottom_1]
type = FlowChannel1Phase
position = '1 0 -0.5'
orientation = '-1 0 0'
length = 0.5
n_elems = 5
A = ${A_pipe}
D_h = ${pipe_dia}
[]
[pump]
type = Pump1Phase
position = '0.5 0 -0.5'
connections = 'bottom_1:out bottom_2:in'
volume = 1e-4
A_ref = ${A_pipe}
head = 3.56
[]
[bottom_2]
type = FlowChannel1Phase
position = '0.5 0 -0.5'
orientation = '-1 0 0'
length = 0.5
n_elems = 5
A = ${A_pipe}
D_h = ${pipe_dia}
[]
[jct9]
type = JunctionOneToOne1Phase
connections = 'bottom_2:out up_pipe_1:in'
[]
[inlet_sec]
type = InletMassFlowRateTemperature1Phase
input = 'hx/sec:in'
m_dot = ${m_dot_sec_in}
T = 300
[]
[outlet_sec]
type = Outlet1Phase
input = 'hx/sec:out'
p = 1e5
[]
[]
[Postprocessors]
[power_to_coolant]
type = ADHeatRateDirectFlowChannel
q_wall_prop = q_wall
block = core_chan
P_hf = 1
[]
[core_T_out]
type = SideAverageValue
boundary = core_chan:out
variable = T
[]
[T_out]
type = SideAverageValue
boundary = bottom_1:out
variable = T
[]
[core_p_in]
type = SideAverageValue
boundary = up_pipe_1:out
variable = p
[]
[core_p_out]
type = SideAverageValue
boundary = up_pipe_2:in
variable = p
[]
[core_delta_p]
type = ParsedPostprocessor
pp_names = 'core_p_in core_p_out'
expression = 'core_p_in - core_p_out'
[]
[hx_pri_T_out]
type = SideAverageValue
boundary = hx/pri:out
variable = T
[]
[hx_sec_T_in]
type = SideAverageValue
boundary = inlet_sec
variable = T
[]
[hx_sec_T_out]
type = SideAverageValue
boundary = outlet_sec
variable = T
[]
[m_dot_sec]
type = ADFlowBoundaryFlux1Phase
boundary = inlet_sec
equation = mass
[]
############## Friction Factor Calculation #############
[av_rhouA]
type = ElementAverageValue
variable = 'rhouA'
block = 'core_chan'
[]
[av_rho]
type = ElementAverageValue
variable = 'rho'
block = 'core_chan'
[]
[Kloss]
type = ParsedPostprocessor
pp_names = 'core_delta_p_tgt av_rhouA av_rho'
expression = '2.0 * core_delta_p_tgt * av_rho * ${A_core} * ${A_core} / (av_rhouA * av_rhouA)'
[]
[Dh]
type = ADElementAverageMaterialProperty
mat_prop = D_h
block = core_chan
[]
[core_f]
type = ParsedPostprocessor
pp_names = 'Kloss Dh'
expression = 'Kloss * Dh / ${core_length}'
[]
### INFO to send to SC
[outlet_pressure]
type = SideAverageValue
boundary = up_pipe_2:in
variable = p
[]
[inlet_mass_flow_rate]
type = ADFlowJunctionFlux1Phase
boundary = up_pipe_1:out
connection_index = 0
equation = mass
junction = jct1
[]
[inlet_temperature]
type = SideAverageValue
boundary = up_pipe_1:out
variable = T
[]
[inlet_mass_flux]
type = ParsedPostprocessor
pp_names = 'inlet_mass_flow_rate'
expression = 'abs(inlet_mass_flow_rate/${SC_core})'
[]
#####
##### Info received from subchannel
[core_delta_p_tgt]
type = Receiver
default = 100
[]
[core_power]
type = Receiver
default = 100
[]
[]
[Preconditioning]
[pc]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
start_time = 0
[TimeStepper]
type = IterationAdaptiveDT
dt = 2
[]
dtmax = 50
end_time = 10
line_search = basic
solve_type = NEWTON
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
nl_rel_tol = 1e-7
nl_abs_tol = 1e-7
nl_max_its = 25
fixed_point_min_its = 1
fixed_point_max_its = 5
accept_on_max_fixed_point_iteration = true
auto_advance = true
relaxation_factor = 0.5
[]
[Outputs]
csv = true
[console]
type = Console
max_rows = 1
outlier_variable_norms = false
[]
print_linear_residuals = false
[]
################################################################################
# A multiapp that couples THM to subchannel
################################################################################
[MultiApps]
# active = ''
[subchannel]
type = FullSolveMultiApp
input_files = 'subchannel.i'
execute_on = 'timestep_end'
positions = '0 0 0'
max_procs_per_app = 1
output_in_position = true
bounding_box_padding = '0 0 0.1'
[]
[]
[Transfers]
# active = ''
[pressure_drop_transfer] # Get pressure drop to THM from subchannel
type = MultiAppPostprocessorTransfer
from_multi_app = subchannel
from_postprocessor = total_pressure_drop_SC
to_postprocessor = core_delta_p_tgt
reduction_type = average
execute_on = 'timestep_end'
[]
[power_transfer] # Get Total power to THM from subchannel
type = MultiAppPostprocessorTransfer
from_multi_app = subchannel
from_postprocessor = Total_power
to_postprocessor = core_power
reduction_type = average
execute_on = 'timestep_end'
[]
[mass_flux_tranfer] # Send mass_flux at the inlet of THM core to subchannel
type = MultiAppPostprocessorTransfer
to_multi_app = subchannel
from_postprocessor = inlet_mass_flux
to_postprocessor = report_mass_flux_inlet
execute_on = 'timestep_end'
[]
[outlet_pressure_tranfer] # Send pressure at the outlet of THM core to subchannel
type = MultiAppPostprocessorTransfer
to_multi_app = subchannel
from_postprocessor = outlet_pressure
to_postprocessor = report_pressure_outlet
execute_on = 'timestep_end'
[]
[inlet_temperature_transfer]
type = MultiAppPostprocessorTransfer
to_multi_app = subchannel
from_postprocessor = inlet_temperature
to_postprocessor = report_temperature_inlet
execute_on = 'timestep_end'
[]
[]
(modules/thermal_hydraulics/test/tests/components/pump_1phase/pump_mass_energy_conservation.i)
# This test tests that mass and energy are conserved.
dt = 1.e-2
head = 95.
volume = 1.
A = 1.
g = 9.81
[GlobalParams]
initial_T = 393.15
initial_vel = 0
f = 0
fp = fp
scaling_factor_1phase = '0.04 0.04 0.04e-5'
closures = simple_closures
A = ${A}
[]
[FluidProperties]
[fp]
type = StiffenedGasFluidProperties
gamma = 2.35
q = -1167e3
q_prime = 0
p_inf = 1.e9
cv = 1816
[]
[]
[Closures]
[simple_closures]
type = Closures1PhaseSimple
[]
[]
[Components]
[wall_in]
type = SolidWall1Phase
input = 'pipe1:in'
[]
[pipe1]
type = FlowChannel1Phase
position = '0 0 0'
orientation = '1 0 0'
length = 1
initial_p = 1.7E+07
n_elems = 10
gravity_vector = '0 0 0'
[]
[pump]
type = Pump1Phase
connections = 'pipe1:out pipe2:in'
position = '1.02 0 0'
initial_p = 1.3e+07
scaling_factor_rhoEV = 1e-5
head = ${head}
A_ref = ${A}
volume = ${volume}
initial_vel_x = 0
initial_vel_y = 0
initial_vel_z = 0
[]
[pipe2]
type = FlowChannel1Phase
position = '1.04 0 0'
orientation = '1 0 0'
length = 1
initial_p = 1.3e+07
n_elems = 10
gravity_vector = '0 0 0'
[]
[wall_out]
type = SolidWall1Phase
input = 'pipe2:out'
[]
[]
[Preconditioning]
[pc]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
scheme = 'implicit-euler'
start_time = 0
dt = ${dt}
num_steps = 6
abort_on_solve_fail = true
solve_type = 'PJFNK'
line_search = 'basic'
nl_rel_tol = 1e-8
nl_abs_tol = 1e-6
nl_max_its = 15
l_tol = 1e-4
l_max_its = 10
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
[Quadrature]
type = GAUSS
order = SECOND
[]
[]
[Postprocessors]
# mass conservation
[mass_pipes]
type = ElementIntegralVariablePostprocessor
variable = rhoA
block = 'pipe1 pipe2'
execute_on = 'initial timestep_end'
[]
[mass_pump]
type = ElementAverageValue
variable = rhoV
block = 'pump'
execute_on = 'initial timestep_end'
[]
[mass_tot]
type = SumPostprocessor
values = 'mass_pipes mass_pump'
execute_on = 'initial timestep_end'
[]
[mass_tot_change]
type = ChangeOverTimePostprocessor
postprocessor = mass_tot
change_with_respect_to_initial = true
compute_relative_change = true
execute_on = 'initial timestep_end'
[]
# energy conservation
[E_pipes]
type = ElementIntegralVariablePostprocessor
variable = rhoEA
block = 'pipe1 pipe2'
execute_on = 'initial timestep_end'
[]
[E_pump]
type = ElementAverageValue
variable = rhoEV
block = 'pump'
execute_on = 'initial timestep_end'
[]
[E_tot]
type = LinearCombinationPostprocessor
pp_coefs = '1 1'
pp_names = 'E_pipes E_pump'
execute_on = 'initial timestep_end'
[]
[S_energy]
type = FunctionValuePostprocessor
function = S_energy_fcn
indirect_dependencies = 'pump_rhouV'
execute_on = 'initial timestep_end'
[]
[E_change]
type = ChangeOverTimePostprocessor
postprocessor = E_tot
execute_on = 'initial timestep_end'
[]
# this should also execute on initial, this value is
# lagged by one timestep as a workaround to moose issue #13262
[E_conservation]
type = FunctionValuePostprocessor
function = E_conservation_fcn
execute_on = 'timestep_end'
[]
[pump_rhouV]
type = ElementAverageValue
variable = rhouV
block = 'pump'
execute_on = 'initial timestep_end'
[]
[]
[Functions]
[S_energy_fcn]
type = ParsedFunction
expression = 'rhouV * g * head * A / volume'
symbol_names = 'rhouV g head A volume'
symbol_values = 'pump_rhouV ${g} ${head} ${A} ${volume}'
[]
[E_conservation_fcn]
type = ParsedFunction
expression = '(E_change - S_energy * dt) / E_tot'
symbol_names = 'E_change S_energy dt E_tot'
symbol_values = 'E_change S_energy ${dt} E_tot'
[]
[]
[Outputs]
[out]
type = CSV
execute_on = 'FINAL'
show = 'mass_tot_change E_conservation'
[]
[]
(modules/thermal_hydraulics/test/tests/components/pump_1phase/jacobian.i)
[GlobalParams]
initial_T = 393.15
initial_vel = 0
initial_p = 17e+06
f = 0
fp = fp
closures = simple_closures
A = 1
gravity_vector = '0 0 0'
[]
[FluidProperties]
[fp]
type = StiffenedGasFluidProperties
gamma = 2.35
q = -1167e3
q_prime = 0
p_inf = 1.e9
cv = 1816
[]
[]
[Closures]
[simple_closures]
type = Closures1PhaseSimple
[]
[]
[Components]
[pipe1]
type = FlowChannel1Phase
position = '0 0 0'
orientation = '1 0 0'
length = 1
n_elems = 2
gravity_vector = '0 0 0'
[]
[pump]
type = Pump1Phase
connections = 'pipe1:out pipe2:in'
position = '1.02 0 0'
head = 95
A_ref = 1
volume = 1
initial_vel_x = 0
initial_vel_y = 0
initial_vel_z = 0
[]
[pipe2]
type = FlowChannel1Phase
position = '1.04 0 0'
orientation = '1 0 0'
length = 1
n_elems = 2
[]
[]
[Preconditioning]
[pc]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
scheme = 'bdf2'
start_time = 0
dt = 1e-2
num_steps = 1
abort_on_solve_fail = true
solve_type = 'NEWTON'
line_search = 'basic'
nl_rel_tol = 1e-8
nl_abs_tol = 1e-6
nl_max_its = 15
l_tol = 1e-4
l_max_its = 10
petsc_options_iname = '-snes_test_err'
petsc_options_value = '1e-9'
[Quadrature]
type = GAUSS
order = SECOND
[]
[]
(modules/thermal_hydraulics/tutorials/single_phase_flow/06_custom_closures.i)
T_in = 300. # K
m_dot_in = 1e-2 # kg/s
press = 10e5 # Pa
# core parameters
core_length = 1. # m
core_n_elems = 25
core_dia = '${units 2. cm -> m}'
core_pitch = '${units 8.7 cm -> m}'
A_core = '${fparse core_pitch^2 - 0.25 *pi * core_dia^2}'
P_wet_core = '${fparse 4*core_pitch + pi * core_dia}'
Dh_core = '${fparse 4 * A_core / P_wet_core}'
# pipe parameters
pipe_dia = '${units 10. cm -> m}'
A_pipe = '${fparse 0.25 * pi * pipe_dia^2}'
tot_power = 2000 # W
# heat exchanger parameters
hx_dia_inner = '${units 12. cm -> m}'
hx_wall_thickness = '${units 5. mm -> m}'
hx_dia_outer = '${units 50. cm -> m}'
hx_radius_wall = '${fparse hx_dia_inner / 2. + hx_wall_thickness}'
hx_length = 1.5 # m
hx_n_elems = 25
m_dot_sec_in = 1. # kg/s
[GlobalParams]
initial_p = ${press}
initial_vel = 0.0001
initial_T = ${T_in}
initial_vel_x = 0
initial_vel_y = 0
initial_vel_z = 0
gravity_vector = '0 0 0'
rdg_slope_reconstruction = minmod
scaling_factor_1phase = '1 1e-2 1e-4'
scaling_factor_rhoV = 1
scaling_factor_rhouV = 1e-2
scaling_factor_rhovV = 1e-2
scaling_factor_rhowV = 1e-2
scaling_factor_rhoEV = 1e-4
closures = thm_closures
fp = he
[]
[Functions]
[m_dot_sec_fn]
type = PiecewiseLinear
xy_data = '
0 0
10 ${m_dot_sec_in}'
[]
[]
[FluidProperties]
[he]
type = IdealGasFluidProperties
molar_mass = 4e-3
gamma = 1.67
k = 0.2556
mu = 3.22639e-5
[]
[water]
type = StiffenedGasFluidProperties
gamma = 2.35
cv = 1816.0
q = -1.167e6
p_inf = 1.0e9
q_prime = 0
[]
[]
[Closures]
[thm_closures]
type = Closures1PhaseTHM
[]
[]
[Materials]
[Re_mat]
type = ADReynoldsNumberMaterial
Re = Re
rho = rho
vel = vel
D_h = D_h
mu = mu
block = hx/pri
[]
[f_mat]
type = ADParsedMaterial
property_name = f_D
constant_names = 'a b c'
constant_expressions = '1 0.1 -0.5'
material_property_names = 'Re'
expression = 'a + b * Re^c'
block = hx/pri
[]
[Pr_mat]
type = ADPrandtlNumberMaterial
Pr = Pr
cp = cp
mu = mu
k = k
block = hx/pri
[]
[Nu_mat]
type = ADParsedMaterial
property_name = 'Nu'
constant_names = 'a b c'
constant_expressions = '0.03 0.9 0.5'
material_property_names = 'Re Pr'
expression = 'a * Re ^b * Pr^c'
block = hx/pri
[]
[Hw_mat]
type = ADConvectiveHeatTransferCoefficientMaterial
D_h = D_h
k = k
Nu = Nu
Hw = Hw
block = hx/pri
[]
[]
[SolidProperties]
[steel]
type = ThermalFunctionSolidProperties
rho = 8050
k = 45
cp = 466
[]
[]
[Components]
[total_power]
type = TotalPower
power = ${tot_power}
[]
[up_pipe_1]
type = FlowChannel1Phase
position = '0 0 0'
orientation = '0 0 1'
length = 0.5
n_elems = 15
A = ${A_pipe}
D_h = ${pipe_dia}
[]
[jct1]
type = JunctionParallelChannels1Phase
position = '0 0 0.5'
connections = 'up_pipe_1:out core_chan:in'
volume = 1e-5
[]
[core_chan]
type = FlowChannel1Phase
position = '0 0 0.5'
orientation = '0 0 1'
length = ${core_length}
n_elems = ${core_n_elems}
roughness = .0001
A = ${A_core}
D_h = ${Dh_core}
[]
[core_hs]
type = HeatStructureCylindrical
position = '0 0 0.5'
orientation = '0 0 1'
length = ${core_length}
n_elems = ${core_n_elems}
names = 'block'
widths = '${fparse core_dia / 2.}'
solid_properties = 'steel'
solid_properties_T_ref = '300'
n_part_elems = 3
[]
[core_heating]
type = HeatSourceFromTotalPower
hs = core_hs
regions = block
power = total_power
[]
[core_ht]
type = HeatTransferFromHeatStructure1Phase
flow_channel = core_chan
hs = core_hs
hs_side = outer
P_hf = '${fparse pi * core_dia}'
[]
[jct2]
type = JunctionParallelChannels1Phase
position = '0 0 1.5'
connections = 'core_chan:out up_pipe_2:in'
volume = 1e-5
[]
[up_pipe_2]
type = FlowChannel1Phase
position = '0 0 1.5'
orientation = '0 0 1'
length = 0.5
n_elems = 10
A = ${A_pipe}
D_h = ${pipe_dia}
[]
[jct3]
type = JunctionOneToOne1Phase
connections = 'up_pipe_2:out top_pipe_1:in'
[]
[top_pipe_1]
type = FlowChannel1Phase
position = '0 0 2'
orientation = '1 0 0'
length = 0.5
n_elems = 10
A = ${A_pipe}
D_h = ${pipe_dia}
[]
[top_pipe_2]
type = FlowChannel1Phase
position = '0.5 0 2'
orientation = '1 0 0'
length = 0.5
n_elems = 10
A = ${A_pipe}
D_h = ${pipe_dia}
[]
[jct4]
type = VolumeJunction1Phase
position = '0.5 0 2'
volume = 1e-5
connections = 'top_pipe_1:out top_pipe_2:in press_pipe:in'
[]
[press_pipe]
type = FlowChannel1Phase
position = '0.5 0 2'
orientation = '0 1 0'
length = 0.2
n_elems = 5
A = ${A_pipe}
D_h = ${pipe_dia}
[]
[pressurizer]
type = InletStagnationPressureTemperature1Phase
p0 = ${press}
T0 = ${T_in}
input = press_pipe:out
[]
[jct5]
type = JunctionOneToOne1Phase
connections = 'top_pipe_2:out down_pipe_1:in'
[]
[down_pipe_1]
type = FlowChannel1Phase
position = '1 0 2'
orientation = '0 0 -1'
length = 0.25
A = ${A_pipe}
n_elems = 5
[]
[jct6]
type = JunctionParallelChannels1Phase
position = '1 0 1.75'
connections = 'down_pipe_1:out hx/pri:in'
volume = 1e-5
[]
[hx]
[pri]
type = FlowChannel1Phase
position = '1 0 1.75'
orientation = '0 0 -1'
length = ${hx_length}
n_elems = ${hx_n_elems}
roughness = 1e-5
A = '${fparse pi * hx_dia_inner * hx_dia_inner / 4.}'
D_h = ${hx_dia_inner}
closures = ''
[]
[ht_pri]
type = HeatTransferFromHeatStructure1Phase
hs = hx/wall
hs_side = inner
flow_channel = hx/pri
P_hf = '${fparse pi * hx_dia_inner}'
[]
[wall]
type = HeatStructureCylindrical
position = '1 0 1.75'
orientation = '0 0 -1'
length = ${hx_length}
n_elems = ${hx_n_elems}
widths = '${hx_wall_thickness}'
n_part_elems = '3'
solid_properties = 'steel'
solid_properties_T_ref = '300'
names = '0'
inner_radius = '${fparse hx_dia_inner / 2.}'
[]
[ht_sec]
type = HeatTransferFromHeatStructure1Phase
hs = hx/wall
hs_side = outer
flow_channel = hx/sec
P_hf = '${fparse 2 * pi * hx_radius_wall}'
[]
[sec]
type = FlowChannel1Phase
position = '${fparse 1 + hx_wall_thickness} 0 0.25'
orientation = '0 0 1'
length = ${hx_length}
n_elems = ${hx_n_elems}
A = '${fparse pi * (hx_dia_outer * hx_dia_outer / 4. - hx_radius_wall * hx_radius_wall)}'
D_h = '${fparse hx_dia_outer - (2 * hx_radius_wall)}'
fp = water
initial_T = 300
[]
[]
[jct7]
type = JunctionParallelChannels1Phase
position = '1 0 0.5'
connections = 'hx/pri:out down_pipe_2:in'
volume = 1e-5
[]
[down_pipe_2]
type = FlowChannel1Phase
position = '1 0 0.25'
orientation = '0 0 -1'
length = 0.25
n_elems = 10
A = ${A_pipe}
D_h = ${pipe_dia}
[]
[jct8]
type = JunctionOneToOne1Phase
connections = 'down_pipe_2:out bottom_1:in'
[]
[bottom_1]
type = FlowChannel1Phase
position = '1 0 0'
orientation = '-1 0 0'
length = 0.5
n_elems = 5
A = ${A_pipe}
D_h = ${pipe_dia}
[]
[pump]
type = Pump1Phase
position = '0.5 0 0'
connections = 'bottom_1:out bottom_2:in'
volume = 1e-4
A_ref = ${A_pipe}
head = 0
[]
[bottom_2]
type = FlowChannel1Phase
position = '0.5 0 0'
orientation = '-1 0 0'
length = 0.5
n_elems = 5
A = ${A_pipe}
D_h = ${pipe_dia}
[]
[jct9]
type = JunctionOneToOne1Phase
connections = 'bottom_2:out up_pipe_1:in'
[]
[inlet_sec]
type = InletMassFlowRateTemperature1Phase
input = 'hx/sec:in'
m_dot = 0
T = 300
[]
[outlet_sec]
type = Outlet1Phase
input = 'hx/sec:out'
p = 1e5
[]
[]
[ControlLogic]
[set_point]
type = GetFunctionValueControl
function = ${m_dot_in}
[]
[pid]
type = PIDControl
initial_value = 0.0
set_point = set_point:value
input = m_dot_pump
K_p = 1.
K_i = 4.
K_d = 0
[]
[set_pump_head]
type = SetComponentRealValueControl
component = pump
parameter = head
value = pid:output
[]
[m_dot_sec_inlet_ctrl]
type = GetFunctionValueControl
function = m_dot_sec_fn
[]
[set_m_dot_sec_ctrl]
type = SetComponentRealValueControl
component = inlet_sec
parameter = m_dot
value = m_dot_sec_inlet_ctrl:value
[]
[]
[Postprocessors]
[power_to_coolant]
type = ADHeatRateConvection1Phase
block = core_chan
P_hf = '${fparse pi *core_dia}'
[]
[m_dot_pump]
type = ADFlowJunctionFlux1Phase
boundary = core_chan:in
connection_index = 1
equation = mass
junction = jct7
[]
[core_T_out]
type = SideAverageValue
boundary = core_chan:out
variable = T
[]
[core_p_in]
type = SideAverageValue
boundary = core_chan:in
variable = p
[]
[core_p_out]
type = SideAverageValue
boundary = core_chan:out
variable = p
[]
[core_delta_p]
type = ParsedPostprocessor
pp_names = 'core_p_in core_p_out'
expression = 'core_p_in - core_p_out'
[]
[hx_pri_T_out]
type = SideAverageValue
boundary = hx/pri:out
variable = T
[]
[hx_sec_T_in]
type = SideAverageValue
boundary = inlet_sec
variable = T
[]
[hx_sec_T_out]
type = SideAverageValue
boundary = outlet_sec
variable = T
[]
[m_dot_sec]
type = ADFlowBoundaryFlux1Phase
boundary = inlet_sec
equation = mass
[]
[Hw_hx_pri]
type = ADElementAverageMaterialProperty
mat_prop = Hw
block = hx/pri
[]
[fD_hx_pri]
type = ADElementAverageMaterialProperty
mat_prop = f_D
block = hx/pri
[]
[]
[Preconditioning]
[pc]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
start_time = 0
[TimeStepper]
type = IterationAdaptiveDT
dt = 1
[]
dtmax = 5
end_time = 500
line_search = basic
solve_type = NEWTON
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
nl_rel_tol = 1e-8
nl_abs_tol = 1e-8
nl_max_its = 25
[]
[Outputs]
exodus = true
[console]
type = Console
max_rows = 1
outlier_variable_norms = false
[]
print_linear_residuals = false
[]
(modules/thermal_hydraulics/test/tests/components/pump_1phase/pump_pressure_check.i)
# This test checks that the expected pressure rise due to the user supplied
# pump head matches the actual pressure rise across the pump.
# The orientation of flow channels in this test have no components in the z-direction
# due to the expected_pressure_rise_fcn not accounting for hydrostatic pressure.
head = 95.
dt = 0.1
g = 9.81
volume = 0.567
[GlobalParams]
initial_T = 393.15
initial_vel = 0.0372
A = 0.567
f = 0
fp = fp
scaling_factor_1phase = '1 1 1e-5'
closures = simple_closures
[]
[FluidProperties]
[fp]
type = StiffenedGasFluidProperties
gamma = 2.35
q = -1167e3
q_prime = 0
p_inf = 1.e9
cv = 1816
[]
[]
[Closures]
[simple_closures]
type = Closures1PhaseSimple
[]
[]
[Functions]
[expected_pressure_rise_fcn]
type = ParsedFunction
expression = 'rhoV * g * head / volume'
symbol_names = 'rhoV g head volume'
symbol_values = 'pump_rhoV ${g} ${head} ${volume}'
[]
[]
[Components]
[inlet]
type = InletMassFlowRateTemperature1Phase
input = 'pipe1:in'
m_dot = 20
T = 393.15
[]
[pipe1]
type = FlowChannel1Phase
position = '0 0 0'
orientation = '1 0 0'
length = 1
initial_p = 1.318964e+07
n_elems = 10
[]
[pump]
type = Pump1Phase
connections = 'pipe1:out pipe2:in'
position = '1.02 0 0'
initial_p = 1.318964e+07
scaling_factor_rhoEV = 1e-5
head = ${head}
volume = ${volume}
A_ref = 0.567
initial_vel_x = 1
initial_vel_y = 1
initial_vel_z = 0
[]
[pipe2]
type = FlowChannel1Phase
position = '1.04 0 0'
orientation = '0 2 0'
length = 0.96
initial_p = 1.4072E+07
n_elems = 10
[]
[outlet]
type = Outlet1Phase
input = 'pipe2:out'
p = 1.4072E+07
[]
[]
[Preconditioning]
[pc]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
scheme = 'implicit-euler'
start_time = 0
dt = ${dt}
num_steps = 4
abort_on_solve_fail = true
solve_type = 'PJFNK'
line_search = 'basic'
nl_rel_tol = 1e-8
nl_abs_tol = 1e-6
nl_max_its = 15
l_tol = 1e-4
[Quadrature]
type = GAUSS
order = SECOND
[]
[]
[Postprocessors]
[pump_rhoV]
type = ElementAverageValue
variable = rhoV
block = 'pump'
execute_on = 'initial timestep_end'
[]
[expected_pressure_rise]
type = FunctionValuePostprocessor
function = expected_pressure_rise_fcn
indirect_dependencies = 'pump_rhoV'
execute_on = 'initial timestep_end'
[]
[p_inlet]
type = SideAverageValue
variable = p
boundary = 'pipe1:out'
execute_on = 'initial timestep_end'
[]
[p_outlet]
type = SideAverageValue
variable = p
boundary = 'pipe2:in'
execute_on = 'initial timestep_end'
[]
[actual_pressure_rise]
type = DifferencePostprocessor
value1 = p_outlet
value2 = p_inlet
execute_on = 'timestep_end'
[]
[pressure_rise_diff]
type = RelativeDifferencePostprocessor
value1 = actual_pressure_rise
value2 = expected_pressure_rise
execute_on = 'timestep_end'
[]
[]
[Outputs]
[out]
type = CSV
execute_on = 'FINAL'
show = 'pressure_rise_diff'
[]
[]