Line data    Source code

       1             : //* This file is part of the MOOSE framework
       2             : //* https://mooseframework.inl.gov
       3             : //*
       4             : //* All rights reserved, see COPYRIGHT for full restrictions
       5             : //* https://github.com/idaholab/moose/blob/master/COPYRIGHT
       6             : //*
       7             : //* Licensed under LGPL 2.1, please see LICENSE for details
       8             : //* https://www.gnu.org/licenses/lgpl-2.1.html
       9             : 
      10             : #include "ADWallHeatTransferCoefficientLyonMaterial.h"
      11             : #include "SinglePhaseFluidProperties.h"
      12             : #include "FlowModelSinglePhase.h"
      13             : #include "Numerics.h"
      14             : 
      15             : registerMooseObject("ThermalHydraulicsApp", ADWallHeatTransferCoefficientLyonMaterial);
      16             : 
      17             : InputParameters
      18         170 : ADWallHeatTransferCoefficientLyonMaterial::validParams()
      19             : {
      20         170 :   InputParameters params = Material::validParams();
      21         340 :   params.addParam<MaterialPropertyName>("Hw",
      22             :                                         FlowModelSinglePhase::HEAT_TRANSFER_COEFFICIENT_WALL,
      23             :                                         "Heat transfer coefficient material property");
      24         340 :   params.addParam<MaterialPropertyName>(
      25             :       "rho", FlowModelSinglePhase::DENSITY, "Density of the fluid");
      26         340 :   params.addParam<MaterialPropertyName>("vel", FlowModelSinglePhase::VELOCITY, "Fluid velocity");
      27         340 :   params.addParam<MaterialPropertyName>(
      28             :       "D_h", FlowModelSinglePhase::HYDRAULIC_DIAMETER, "Hydraulic diameter");
      29         340 :   params.addParam<MaterialPropertyName>(
      30             :       "cp", FlowModelSinglePhase::SPECIFIC_HEAT_CONSTANT_PRESSURE, "Specific heat of the fluid");
      31         340 :   params.addParam<MaterialPropertyName>(
      32             :       "mu", FlowModelSinglePhase::DYNAMIC_VISCOSITY, "Dynamic viscosity of the fluid");
      33         340 :   params.addParam<MaterialPropertyName>(
      34             :       "k", FlowModelSinglePhase::THERMAL_CONDUCTIVITY, "Heat conductivity of the fluid");
      35         340 :   params.addParam<MaterialPropertyName>(
      36             :       "T", FlowModelSinglePhase::TEMPERATURE, "Fluid temperature");
      37         340 :   params.addParam<MaterialPropertyName>("T_wall", FlowModel::TEMPERATURE_WALL, "Wall temperature");
      38         170 :   params.addClassDescription(
      39             :       "Computes wall heat transfer coefficient for liquid sodium using Lyon correlation");
      40         170 :   return params;
      41           0 : }
      42             : 
      43         132 : ADWallHeatTransferCoefficientLyonMaterial::ADWallHeatTransferCoefficientLyonMaterial(
      44         132 :     const InputParameters & parameters)
      45             :   : Material(parameters),
      46         132 :     _Hw(declareADProperty<Real>("Hw")),
      47         264 :     _rho(getADMaterialProperty<Real>("rho")),
      48         264 :     _vel(getADMaterialProperty<Real>("vel")),
      49         264 :     _D_h(getADMaterialProperty<Real>("D_h")),
      50         264 :     _k(getADMaterialProperty<Real>("k")),
      51         264 :     _mu(getADMaterialProperty<Real>("mu")),
      52         264 :     _cp(getADMaterialProperty<Real>("cp")),
      53         264 :     _T(getADMaterialProperty<Real>("T")),
      54         396 :     _T_wall(getADMaterialProperty<Real>("T_wall"))
      55             : {
      56         132 : }
      57             : 
      58             : void
      59        4289 : ADWallHeatTransferCoefficientLyonMaterial::computeQpProperties()
      60             : {
      61        4289 :   ADReal Pe = std::max(1.0, THM::Peclet(1., _cp[_qp], _rho[_qp], _vel[_qp], _D_h[_qp], _k[_qp]));
      62       12867 :   ADReal Nu = 7 + 0.025 * std::pow(Pe, 0.8);
      63        4289 :   _Hw[_qp] = THM::wallHeatTransferCoefficient(Nu, _k[_qp], _D_h[_qp]);
      64        4289 : }